Trouble with Oracle Soap connection
I am using Oracle R2 (9.02) server and trying to test deploy some basic webservices. I am using Jdeveloper 9.0.3 as the ide. When I get the webservice fielded, should I be able to see it in the web based OEM? If so, where generically. My main problem is testing it with a generated webservice stub, that the developer created, and I editied to make the main method. When I try to run this, against the remote server ocj4 instance, the server returns :SOAPException: faultCode=SOAP-ENV:Server; msg=[SOAPException: faultCode=SOAP-ENV:Server; msg=]]
at mypackage1.Rpd01WsWebServiceStub.getaddress(Rpd01WsWebServiceStub.java:94)
at mypackage1.Rpd01WsWebServiceStub.main(Rpd01WsWebServiceStub.java:54)
Process exited with exit code 0.
What is going on, and where can I find a better log of of this on the server?
thanks for the help
Similar Messages
-
I am having trouble with the initial connection of the apple tv. I have isolated the problem to the cable/connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?
There are only two types of HDMI cables (standard and high speed - listen to all 1.2, 1.3 etc etc nonsense they will try to tell in the store) both types will work with the Apple TV.
The cable may be faulty though, have you got another to try, what exactly is happening. -
Recently I upgraded Lion to 10.7.3. Since that time I have been having a lot of trouble with my internet connection. I keep losing the connect and have to go to diagnostics and turn it back on. Is anyone else having this problem?
Thanks, PatI'm afraid there are numerous threads on here discussing this problem. I posted in this one earlier that has a couple of suggestions, but the real solution will hopefully be provided in an update from Apple:
https://discussions.apple.com/message/17589686#17589686 -
i am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?
I had a similar problem. Here is how I resolved the issue.
1. Remove Network Connect
2. Run Terminal and remove /usr/local/juniper and everything within the juniper directory.
3. Reboot the machine and reinstall Network Connect
4. Test if you can now connect.
During removal, you may encounter permission denied error, you will need to change the permission to 777. For example "sudo chmod 777 nc". -
Having trouble with screen saver connecting to my photos?
Having trouble with screen saver connecting to my photos?
I will try that, but isn't Skype supposed to work without headphones? Why does it work with ichat when I talk to my friends with macs?
S -
Struts 1.2.9 with oracle 9i connection
Hello,
When I am trying to connect my application with oracle 9i databse connection is refusing.My stuts_config.xml is like this
<data-sources>
<data-source type="org.apache.commons.dbcp.BasicDataSource">
<set-property
property="driverClassName"
value="oracle.jdbc.driver.OracleDriver" />
<set-property
property="url"
value="jdbc:oracle:thin:@192.168.1.56:1521:hpcl?autoReconnect=true" />
<set-property
property="username"
value="uday" />
<set-property
property="password"
value="uday" />
<set-property
property="maxActive"
value="10" />
<set-property
property="maxWait"
value="5000" />
<set-property
property="defaultAutoCommit"
value="false" />
<set-property
property="defaultReadOnly"
value="false" />
<set-property
property="validationQuery"
value="SELECT COUNT(*) FROM mst_ecategory" />
</data-source>
</data-sources>
Error is like that
error in connectionjava.sql.SQLException: Io exception: Connection refused(DESCR
IPTION=(TMP=)(VSNNUM=150999297)(ERR=12505)(ERROR_STACK=(ERROR=(CODE=12505)(EMFI=
4))))
processActionForward(/pages/success.html, false)
'/pages/success.html' - processed as uri
My java code is give below.
package app;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
import org.apache.struts.action.Action;
import javax.sql.*;
import java.sql.*;
public class AddressAction extends Action
public ActionForward execute(ActionMapping mapping,ActionForm form,HttpServletRequest request,HttpServletResponse response) throws Exception
javax.sql.DataSource dataSource;
java.sql.Connection myConnection=null;
try
dataSource = getDataSource(request);
myConnection = dataSource.getConnection();
Statement stmt=myConnection.createStatement();
System.out.println("connection established");
catch (Exception e)
System.out.println("error in connection"+e.getMessage());
return mapping.findForward("success");
Can anbody help me for solving this problem.
Thanking You.
Bipin.Vhi man
i think problem is in database sid even i have the same same problem if u get the solution do reply for me also -
Trouble with Oracle Migration Workbench - need help urgently
Hi,
I have trouble with capturing informix7 model, capture wizard hangs with following error in log:
EXCEPTION : ProjectImpl.setAttribute() java.sql.SQLException: ORA-00917: missing comma
what is wrong ? (Default repository also doesn't work because of known bug) Where can i find older version of OMW that worked well?
Thanks a lot
JackI worked this out , it was cause by informix password. Password contains special symbols like ' and $ and . and so on. Replace them fix this.
-
Trouble with oracle apex and http server
I have Oracle Apex 3.2 running with Oracle OHS 10g... when I load big pages... some pages aren't completely rendered... there are incomplete source code when some pages are generated...
This causes things like the hidden tag that contains the md5 verificator for the page would not generate correctly...
see this [http://img444.imageshack.us/i/error2le.png/]
And it causes repercussion in the DML process:
see this [http://img715.imageshack.us/i/error1d.png/]
Edited by: Juan David Palacios on 09-jun-2010 8:24
Edited by: Juan David Palacios on 09-jun-2010 9:44
Edited by: Juan David Palacios on 10-jun-2010 5:57This is frequently caused by failing to meet APEX installation and configuration requirements. Ensure the DAD character set is AL32UTF8 and version of the PL/SQL Web Toolkit >= 10.1.2.0.6.
The DAD may be at the location indicated in the documentation link below, or it may be somewhere else depending on the local configuration. The PL/SQL Web Toolkit can be checked using the query <tt>select owa_util.get_version from dual</tt> in the SQL Workshop.
http://download.oracle.com/docs/cd/E14373_01/install.32/e13366/db_install.htm#HTMIG236
http://download.oracle.com/docs/cd/E14373_01/install.32/e13366/pre_require.htm#BABGBJJD -
Work with Oracle Data Connection
Hello, I'm Eugene Buzin.
I begin to use the last version of ODT for VS.NET 2005. I havn't used it before.
As I conect to shema via data connection node then I can see and work with objects that are in this schema only. I have grants to select and update objects in other schemas, moreover there are public synonyms for these objects but I can't see them via specific connection. Of course I can add connection node per every schema but I don't know login to all of them. I have access to some objects via synonyms only. Please suggest me what I can do in this situation. My e-mail is: [email protected]
Good by and have a greate day.
Very truly yours Eugene V. Buzin.
Sept. 1, 2006.You connect to WHAT with scott/tiger? To sqlserver or to Oracle? The message itself is an odbc message, so I think it's the connection to sqlserver and it's very likely here user scott does not exist. Give us more informations what you are actually doing.
Werner -
Trouble with ADF portlet :) Connect Database
Hi every body!
Thank so much when you send time care to my trouble.
When I deploy a simple ADF portlet without Connecting Database ==> It run :))
After that, with Connecting Database and Create Bussiness Component from Table
==> It run but Result show in Portal: Could not get mark up ...
I using Jdevelop 11g
Thank again!OK
-
Hi all,
I try to connect to Oracle 10g XE R2 using DBI1.607 and create a table with this script:
*#!/usr/bin/perl -w*
use DBI;
use strict;
*my $dbh = DBI->connect( "dbi:oracle:XE", login/pwd, {RaiseError => 1, AutoCommit => 0 });*
* or die " database connection not made: $DBI::errstr ";*
print Creation de la table Regions;
my $SQLCreationTablesRegions = <<SQL;
CREATE TABLE Regions (
id_region INT NOT NULL ,
cheflieu INT NOT NULL ,
tncc INT NOT NULL ,
ncc VARCHAR( 250 ) NOT NULL ,
nccenr VARCHAR( 250 ) NOT NULL ,
PRIMARY KEY ( id_region )
*) COMMENT = 'Les régions 2008 en France';*
SQL
*$dbh->do($SQLCreationTablesRegions)*
or die " Impossible de creer la table Regions\n\n ";
*$dbh->disconnect;*
but i got this error:
Search pattern not terminated at test1.pl line 6.
I will very thankful for you help
RegardsHello LARA0216,
You can post it to:
https://community.oracle.com/community/developer/english/oracle_database/windows_and_.net/odp.net
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
I'm having trouble connecting to wifi. It doesn't recognize any of the networks I usually connect with, including my own. Can anyone help?
Try reboot your router, update router firmware from the manufacturer website.
In iPhone's Settings > General > Reset > Reset Network Settings.
Try reconnect again to your Wi-Fi.
Lastly, do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
Note: You will not lose any data. -
Trouble with Remote Desktop Connection to work PC
Note that I am trying to log into my work PC from my mac at home. My company recently announced we could log in from home with a mac into our work PC. they can't get it to work so I thought I'd try here. We use a mobile site on Safari to obtain a network connection - it launches a program called network connection and I appear to have that network connection (although very little data is being sent and received). I am then supposed to launch a program called Remote Desktop Connection (this program was installed from steps I ran through the first time I logged in through the mobile site, it is version 1.0.3), but when I do, it will not connect and the error message is that remote connection is not enabled, network is too busy, etc). However, the guys at the support desk using PCs can log into my work computer. The only info that's mandatory to input on the Remote Desktop Connection is my work computer name. I don't think this is the issue, because if I purposefully use an incorrect name for my work computer, the error message is different, stating it can't find my (work) computer. I also installed the most recent version of Java for 10.3.x The only issues I can think of are a) this won't work with 10.3.9, although I doubt this is it as the Remote Desktop Connection program appears a few years old, OR there is some firewall issue on my mac. I doubt that this is it, as I assume the mac's firewall protections are to prevent others from remotely logging into my mac, not prevent me from using my mac to remotely log into my work PC. Also, I don't use any third party firewall or other protection stuff on my mac other than whatever comes stock. if you've read this far, thanks, and any comments appreciated! am trying to log in using my dual 1.8 g5 with 1.5g memory using 10.3.9
Are you by any chance with a major retailer? My company just did the same thing. We used to connect via a Virtual Drive connection, but they took that away and went to RDC.
I had problems at first logging in as well. It was acting as if my password was wrong, but I knew that wasn't the case. I finally typed the password in the UserName area and found the problem!
I had two special Characters followed by a capital letter. For instance !@Axxxxxxxx. When I typed the password, I would push and hold the 'shift' key for the first three letters. When typing that in the "user name" field, it showed as !2axxxxxxx. You have to release the 'shift' key and repress it for each letter.
I hope this helps you! -
Dear all
I bought two days ago HP Deskjet 3520 e-All-in one printer serie, but i have some really bad issues with the scanner! I have searched on the internet and i couldn’t find anything to solve the problem.
I have installed the printer according to the book of the printer, so everything did go well(i think), except that i can’t connect the scan to my computer, a Mac OS X (i am connected with the printer). I get directed to the website where i can connect the scanner, but every time i try to connect it with wi-fi, i get two notification, one from my computer (from HP Itility (Dutch) program) that the connection is off and second from the website that i have to make sure that i’m connected with internet (which i am) and to check the IP address if it is the same with my computer (which is the same).
Obesely something did go wrong, but i can’t find the problem.
Beside when its copy or prints a document (no matter how many pages) it’s very slow. It takes 10 -15 minutes till the printer starts. Has it something to do with the problem i’ve got with the scanner or is the printer always so slow? Because the very first time, when i installed the printer, it printed very fast.
By the way i also print the test-results to check if there is a problem, but according to test-results there are no problems at all.
I hope that someone recognize this problem and can help me to solve it.
Regards,
EsraHello chesterpascual,
Welcome to the HP Support Forums!
Regarding the Deskjet 3520 and the error to use setup cartridges, you will need to call HP's Technical Support to see about sending some to you.
Click here to locate the contact information.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Trouble with Application Server connection/deployment
This is the output I get when testing the remote connection I set up:
C:\Program Files\JDeveloper\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Program Files\JDeveloper\jdev\lib\oc4j_remote_deploy.jar http://costanza:1810/Oc4jDcmServletAPI/ ias_admin handmodel1 listApplications F:\ora9ias
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command listApplications F:\ora9ias UNDEFINED UNDEFINED UNDEFINED
Command = LISTAPPLICATIONS
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = b3e9da25826746e393a2ab6e17c30b9b
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=b3e9da25826746e393a2ab6e17c30b9b
Checking command status
HTTP response code = 500, HTTP response msg = Internal Server Error
#### HTTP response is NOT ok
Waiting for 30 seconds and trying again...
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=b3e9da25826746e393a2ab6e17c30b9b
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
Command output:
BC4J
Closing connection to Oc4jDcmServlet
DCM command completed successfully.
Output:
BC4J
Does this look normal? When I try to then use this connection for deployment of War file I get this output:
---- Deployment started. ---- Oct 30, 2002 11:27:05 AM
Wrote WAR file to C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.war
Wrote EAR file to C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear
Invoking DCM servlet client...
C:\Program Files\JDeveloper\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Program Files\JDeveloper\jdev\lib\oc4j_remote_deploy.jar http://costanza:1810/Oc4jDcmServletAPI/ ias_admin **** redeploy F:\ora9ias C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear webapp1 Oc4j_home
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy F:\ora9ias C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear webapp1 Oc4j_home
Command = INVALID_COMMAND
#### Invalid command: redeploy F:\ora9ias C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear webapp1 Oc4j_home
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
#### Could not send command to Oc4jDcmServlet
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (-6)
#### HTTP return code was -6
Exit status of DCM servlet client: -6
Elapsed time for deployment: 5 seconds
#### Deployment incomplete. #### Oct 30, 2002 11:27:09 AM
Anybody know why this thing doesn't work.Hi. I dont know obout CS on UNIX, on windows CS uses port 1090 and HTTP script ContentServer/ContentServer.dll
The web page is
http://server:1090/ContentServer/ContentServer.dll?serverInfo.
It's on Windows....
Also read this Note 586895. -->
New access paths and compatibility with Windows systems
The "/ContentServer/ContentServer. dll" and "/Cache/CSProxyCache.dll" paths have since been established as fixed default values for the Content Server/Cache Servers for Windows.
The module access in the Apache Web server is not restricted to actual paths for program files. Using <location> tags, you can determine any (sub)paths that are to be used to access a module. These tags are entered in the "httpd.conf" file within the relevant module configurations. You can also define the clients allowed to access this "location" within a <location> tag with an Allow/Deny clause.
To be able to continue using the Windows paths proposed in the SAP system, these Windows paths are installed as compatibility tags.
In addition to this, you can use the new, essentially shorter paths "/sapcs" and /sapcsc" to access the SAP Content Server and the SAP Cache Server.
The "Modifications to httpd. conf" attachment to the installation manual contains a list of all of the access paths delivered.
Regards.. Award if helpful.
Edited by: Sergo Beradze on Mar 11, 2008 4:37 PM
Maybe you are looking for
-
I have a problem with my Apple TV2 and iTunes on my imac. Home sharing is on and I see my itunes on ATV2 but play a album and it cuts of after 3 tracks, play a movie and it cuts of after the film. Energy saver settings are set to never, the only way
-
Bank Routing number in check printing
Hi all, I have a reqiurement to modify check portion of standard form f110_prenum_chck.In that i have to print Bank routing number in MICR font.Please guide me how to do this???? Regards, Srilatha Kurapati.
-
SSIS 2012 - NT AUTHORITY\ANONYMOUS LOGON failure
I have a SSIS package which I have deployed to the Integration Services Catalog. When I execute the package it fails on validation of the destination database with the : SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x
-
Windows Time "Allowing" the OS Kernel to sync to CMOS clock after 24H of no valid time sync
Hello, I have been observing the following scenario with the following environment: Windows 2008 Server R2 Not part of a domain CMOS always clock drifted and not sync'd from the OS NTP Aware time. 1. Assume Windows Time has a problem syncing with a t
-
IL CS4 Variables to multiple objects
Hi. How can I bind several objects (on the same artboard) to a single, common, variable? The methods I've tried don't seem to work. This is what I've done: Select multiple objects Click "make text dynamic" (This created two instances in the Variables