Trouble with png files converting to pdf

Why are my files getting all distorted when I convert a png file to pdf?

best of luck, david r.
Hi Donald and David,
Thanks to you both for the ideas. Peter at SONiVOX technical support has been trying to help solve this also. He just sent me an email with an idea that solved the issue!
He suggested I change the length of the SF2 file names to abbreviated names - as the ones included were long (see above in OP).
These samples sound great in the EXS ... really very nice - and dry enough to be very usable in a variety of scenarios I am thinking. I will try their horns next.
And Sonivox technical support is great if anyone is thinking about trying them out. Fast and approachable. They go above and beyond the support we are used to with some third party companies.
Again thanks for this.
Cheers
Dee

Similar Messages

Trouble with SoundFontII files - converting to EXS

Hi forum,
I purchased and downloaded a small package of samples from Sonivox to check out some of their strings in the EXS. After reading a thread here last week about their strings and sounds I wanted to check them out.
The download was a .SIT file so I used stuffit to expand the compressed package. And thus far I've not been able to open these samples in EXS24. I've tried moving into .../Library/ApplicationsSupport/Logic/SamplerInstruments.
I've moving files to the above path - in both my user account (which is what is recommended, I think) and the same path on the sytem drive. I've tried moving just the .sf2 files. No luck. I've tried mvoing the entire folder they were in. No luck. Nothing seems to work so I think I am missing something, but I've gone at this a number of times this past week and can't get my head around why this isn't working.
Here are the details if it helps:
Package is called: XFi Symphonic Strings from http://www.sonivoxmi.com/
Expanded folder, after downloading and expanding with Stuffit Expander contains the following files (I am writing just as they appear with upper and lower case file names):
ICO.jpg (just a jpeg)
Sonic.ico (no idea what this is)
SONiVOX Ens Col Legn Strings.sf2
SONiVOX Ens Espressivo Stings.SF2
SONiVOX Esp Strings.mid (just MIDI file of demo I think)
SONiVOX Esp Strings.mp3 (just an mp3 of demo I believe)
SONiVOX MI Discount.html
I believe that both of the .sf2 files are bank files containing multiple sounds each.
Any guidance you can offer would be great. Thanks in advance.
Cheers
Dee

best of luck, david r.
Hi Donald and David,
Thanks to you both for the ideas. Peter at SONiVOX technical support has been trying to help solve this also. He just sent me an email with an idea that solved the issue!
He suggested I change the length of the SF2 file names to abbreviated names - as the ones included were long (see above in OP).
These samples sound great in the EXS ... really very nice - and dry enough to be very usable in a variety of scenarios I am thinking. I will try their horns next.
And Sonivox technical support is great if anyone is thinking about trying them out. Fast and approachable. They go above and beyond the support we are used to with some third party companies.
Again thanks for this.
Cheers
Dee

Trouble with flickering after converting AVCHD files to Apple Pro Res 22

Hi guys.
I have figured out that Apple Pro res 22 is the best format for my AVCHD files.
But I am having trouble with the files after converting them to this format.
Every 60 frames I have a blurred frame.
This results in a flickering effect when watching the clip.
The original MP4 clip (AVCHD) plays fine on the Mac but when I convert is it flickers.
I have captured a still shot of the frame here
http://www.willpower.net.au/DOWNLOADS/FrameError.jpeg
Here are the settings I am using for the conversion
http://www.willpower.net.au/DOWNLOADS/Error.JPG
Here is the converted file in Apple Pro Res 22 format with the flickering
http://www.willpower.net.au/DOWNLOADS/SANY0007.mov
I'd appreciate any help that you can offer.

Actually I think I might have found the answer.
After diggin deaper into the camera manual I have discovered that the setting I had it on "Full HD" actually is interlaced not progressive. Even though tha badging on the camera says Progressive"
So I think something got lost when converting the files to apple pro res.
I just shot a 10 sec clip on "Full HR" which is the progressive function and it converted nicely.
I'll come back to this post after shooting and making a little test movie today.
Thanks for your help.
PS. I wonder what codec it actually shoots in. Apparently it is not AVCHD but MPEG-4 AVC/H.264 compression (I thought that was AVCHD)

I was informed i need to purchase standard 11 or standard 12 (?) in order to make word files converted from pdf editable. how do i do this?

i was informed i need to purchase standard 11 or standard 12 from adobe in order to make files converted from pdf to word using the recently bought and installed adobe pdf exporter file. how/where do i do this?

Currently the Acrobat version is "XI" (no "12").
With Acrobat XI installed:
"File - Save As Other" --- from here you pick the supported file format for the export.
If a PDF has content that is the output of a scanner then that output (as is the case for All scanners' output) is a picture of text and not real text.
During an export all that can be processed is the picture. As a picture of text is not text it is understandable why Word (or other word processors) cannot edit the content.
So, for such, prior to export run Acrobat's OCR and save.
The export will be of the OCR content.
Do expect to do clean of the text, spelling, punctuation, layout etc.
This may be minor. This may be major. But, there will be some.
Adobe as some online subscription services that can take a "proper" PDF (NOT all are eh) and export to supported file formats.
Two are "ExportPDF" and "PDF Pack".
Be well...

Having trouble with wav files and sample rates

Hi ,I am having trouble with wav files and sample rates .I have been sent multiple projects on wav as the main instrumental ; I wish to record in 48.000kHz .Now comes the problem.When I try to change the project to 48k It seems to pitch up the track.I can't have them send the logic/project file as most have outboard synths,different plug ins etc.This particular case the producer has recorded the synth task in 41.000 kHz .My successful outcome would be to be able t create a project file in 48 kHz .And NOT pitch up whne I add the instrumenta wav file .Any help would be gratefully recieved,this is my first post so any mistakes I may have made go easy

You'll have to convert the actual synth audio file file that the producer gave you to 48kHz. You can do this in the audio Bin in Logic.

Why won't files convert to PDF????????

why won't files convert to PDF??>? Simple word doc to PDF, keeps failing

Hi Joe,
I am sorry for the trouble you are going through.
Please send me your file to below site so that I can look into the problem:
https://adobeformscentral.com/?f=qJiclooYWGGNFtWfj8g3wg#
Thank you.
Hisami

Troubles with xmp files not loading...

I'm having troubles with xmp files not loading with images but are present in the image folders. does anyone know why this is happening and if there is a way to fix this. Also when trying to load the xmp individually they are grayed out and unable to load. I have tried this on different machines (Macs) and still no luck. Any help would be greatly appreciated in this issue.

> The information contained in the XMP file is stored in the DNG file so there is no need for a separate file.
Aww, yuck!! That's a real drag...
When editing lots of files (yesterday's shoot produced 8GB) I back everything up to off-line storage and then, after doing all my edits and crops in ACR, I only have to copy over the small XMP files which takes no time at all.
So if I re-edit the DNG with ACR I have to re-copy ALL the files again to the off-line storage.
I used to sometimes even save 2 versions of the xmp files when I needed 2 different crops of the same images, such as doing a wide screen 'cinema' crop for a corporate client's Intranet presentation of their event, as well as more standard crops to be used for their newsletters.
Guess I won't be using DNG any more..
Thanks for the help Kees :-)
Russell

Trouble with permission to open current PDF from one user to another user. what is the cure. i am running nthe current Server and updated Os 10.9.2

Trouble with permission to open current PDF from one user to another What is the cure ? I'm running the latest Server and OS 10.9.2.

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

I am having alot of trouble with svg files is there some one well versed with adobe svg file

I am having alot of trouble with svg files is there some one well versed with adobe svg file

Clearing out cookies while in gmail helped me to get all functionality back. One of those sites must have messed with gmail. Thanks so much for the help.

Looking for a plt-file converter to pdf or dwg

looking for a plt-file converter to pdf or dwg

graphic converter used to do it. you can check it out and try before you buy
http://www.lemkesoft.de/en/products/
-mvimp

Indesign CS5 with PNG file exporting as a PDF file but the text is random bold

Hello,
I am looking for help to teach me how to solve this problem.
I use Indesign CS5 to make a proposal. I set the page marker and sub title in the master page.
Of course, there are including dozens of pages and some pictures here.
And one of these page, I place a PNG file and type some text.
When I export this file as a PDF file, one page, which is including PNG file, the text becomes random bold.
Therefore, I have used PSD file to cover the PNG file. But finally getting the same problem.
So does anyone can help me how to solve this problem?
Thanks so much for your help.

This sounds like a known issue with transparency on the page. When transparency is introduced ID uses a differnt method, apparently, of rendering text on that page and it appears bolder on screen and can print that way on low resolution devices like desktop printers. It usually is not a problem on press output.
The only way to mainatian consistency would be to introduce transparency on all pages, perhaps by adding a transparent object to your master page.

Problem with Multiple Page convert in PDF

Hi all,
I done one invoice printing and convert in pdf report. but with smartform i get all thing and giving perfect out put.
But when i give second option for direct create a file of PDF this time only one page can convert in PDF. Means when i give multiple input like print invoice 0000910 to 0000925 so this time only invoice no. 0000925 is convert in pdf. But actually i need all invoice like 910 to 925 convert in one PDF with 25 pages.
And i done coding which is show below for this issue.
so please help me out and kindly guide me what is the mistake in my below code for make multiple page in one pdf.
FORM get_FORM1.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_form_name
* VARIANT = ' '
* DIRECT_CALL = ' '
IMPORTING
fm_name = w_fmodule
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
w_cparam-no_dialog = 'X'.
w_cparam-preview = space. " Suppressing the dialog box
                                                    " for print preview
w_cparam-getotf = 'X'.
* Printer name to be used is provided in the export parameter
* OUTPUT_OPTIONS
w_outoptions-tddest = 'LP01'.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ITABz[]                       = itab[].
ITABz1[]                      = itab1[].
IT_ADDRESSz[]                = it_address[].
LOOP at itab1.
    delete ITABz where vbeln ne itab1-vbeln.
    delete ITABz1 where vbeln ne itab1-vbeln.
    delete it_addressz where KUNNR ne itab1-KUNRG.
*      delete itab1 where vbeln ne itab1-vbeln.
    TOTAL_QNT                  = ITAB1-TOTAL_QNT.
    TOTAL_AMT                  = itab1-TOTAL_AMT.
    I_FKIMG = itab1-I_FKIMG.
    BILL_DATE                  = itab1-BILL_DATE.
    IJ_1ICSTNO                 = itab1-IJ_1ICSTNO.
    VECHICAL_NO                = itab1-VECHICAL_NO.
    TAX                        = itab1-TAX.
    INV_TXT                    = ITAB1-INV_TXT.
    inv_name                   = ITAB1-INV_NAME.
    INVOICE                    = ITAB1-INVOICE.
    TAX1                       = itab1-TAX1.
    TAX_VAL                    = itab1-TAX_VAL.
    TAX_ADD_VAL                = itab1-TAX_ADD_VAL   .
    Text_inv                   = itab1-Text_inv.
    TEXT1                      = itab1-TEXT1.
    TEXT2                      = itab1-TEXT2.
    TEXT3                      = itab1-TEXT3.
    TEXT4                      = itab1-TEXT4.
    TEXT5                      = itab1-TEXT5.
    P_DOCNO                    = itab1-vbeln.
CALL FUNCTION w_fmodule
EXPORTING
          WERKS                      = WERKS
          TOTAL_QNT                  = TOTAL_QNT
          TOTAL_AMT                  = TOTAL_AMT
          I_FKIMG                    = I_FKIMG
          STATE                      = STATE
          LAND1                      = LAND1
          LANDX                      = LANDX
          P_DOCNO                    = P_DOCNO
          BILL_DATE                  = BILL_DATE
          IJ_1ICSTNO                 = IJ_1ICSTNO
          T_WERKS                    = T_WERKS
          VECHICAL_NO                = VECHICAL_NO
          TAX                        = TAX
          TAX1                       = TAX1
          TAX_VAL                    = TAX_VAL
          TAX_ADD_VAL                = TAX_ADD_VAL
          inv_txt                    = inv_txt
          inv_name                   = inv_name
          INVOICE                    = INVOICE
          Text_inv                   = Text_inv
          TEXT1                      = TEXT1
          TEXT2                      = TEXT2
          TEXT3                      = TEXT3
          TEXT4                      = TEXT4
          TEXT5                      = TEXT5
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = w_cparam
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
    OUTPUT_OPTIONS             = w_outoptions
*   USER_SETTINGS              = 'X'
IMPORTING
* DOCUMENT_OUTPUT_INFO =
job_output_info = t_otf_from_fm
* JOB_OUTPUT_OPTIONS =
TABLES
        ITAB                       = itabz
        ITAB1                      = itabz1
        IT_ADDRESS                 = it_addressz
     EXCEPTIONS
       FORMATTING_ERROR           = 1
       INTERNAL_ERROR             = 2
       SEND_ERROR                 = 3
       USER_CANCELED              = 4
       OTHERS                     = 5
iF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ITABz[]                       = itab[].
    ITABz1[]                      = itab1[].
    IT_ADDRESSz[]                = it_address[].
ENDLOOP.
t_otf[] = t_otf_from_fm-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
FORMAT = 'PDF'
MAX_LINEWIDTH = 132
* ARCHIVE_INDEX = ' '
* COPYNUMBER = 0
* ASCII_BIDI_VIS2LOG = ' '
* PDF_DELETE_OTFTAB = ' '
IMPORTING
BIN_FILESIZE = W_bin_filesize
* BIN_FILE =
TABLES
otf = T_OTF
lines = T_pdf_tab
EXCEPTIONS
ERR_MAX_LINEWIDTH = 1
ERR_FORMAT = 2
ERR_CONV_NOT_POSSIBLE = 3
ERR_BAD_OTF = 4
OTHERS = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* To display File SAVE dialog window
CALL METHOD cl_gui_frontend_services=>file_save_dialog
CHANGING
filename = w_FILE_NAME
path = w_FILE_PATH
fullpath = w_FULL_PATH
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2
NOT_SUPPORTED_BY_GUI = 3
others = 4
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Use the FM GUI_DOWNLOAD to download the generated PDF file onto the
* presentation server
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE = W_bin_filesize
filename = w_FULL_PATH
FILETYPE = 'BIN'
tables
data_tab = T_pdf_tab
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
EndFORM .               "get_FORM1
thanks
Keyur
Edited by: keyur chauhan on Aug 30, 2010 11:56 AM
Edited by: keyur chauhan on Aug 30, 2010 11:57 AM
Edited by: keyur chauhan on Aug 30, 2010 12:37 PM

Thank you!
Unfortunately I didn't find any work around.
Thanks,
Federico

I am having trouble exporting my file as a pdf.

I have a document which I am creating in indesign, about 100 pages long, with images, etc. Each time I try to export it as a pdf it crashes, and then when I try opening the pdf the error message comes up saying that Adobe reader could not open this file as it is not supported file type or has been damaged.
This file is on my computer and has not been sent as an email.
I use the Indesign cs6 and I am on a mac computer.
The only thing I can think of is that I tried to save this file on a blank cd a few days ago. Maybe that is what caused this?
I have tried everything I can think of, spoke to Adobe support, although still waiting for a call back from them.......
Does anyone have any sound advice as I have a print deadline looming?!

Well the PDF hadn't finished creating because InDesign had crashed - therefore the PDF that was created was incomplete.
As with any file that constantly crashes - make a backup of it before you continue.
First thing to try is to remove Minor Corruption http://forums.adobe.com/thread/526991
If that doesn't work:
To troubleshoot a file you should Export half the pages to PDF and then the other half.
When one half fails you know which part of the book it is in.
You can the do the same again - said it failed on export to 50-100 pages then export 50 - 75 pages - if that doesn't crash then try 76-100 pages.
Divide and conquer.
Once you know what page is causing the problem - you can try various things to get it to work - like
resaving tiffs as psd and place the psd instead (or vice versa)
Resave jpegs/png/gifs etc. to TIFFS or PSD and replace them
It might not be an image problem - it could be the Text Frame is corrputed and you may need to repace that text frame with a new one.
It can be tricky to find out what's causing it.

Best way to work with .png files for print

My client suppllied 100 color .png files (screen captures), about 1700 pixels wide for his book. I opened one with Photoshop, saved as Tiff, converted to Grayscale, cropped to 300 dpi and placed in InDesign, but the InDesign file size is almost 2mb. Is there a better method?

That’s not what I mean at all…I mean what ever they are, they are. Just place them and be done with it.
There is nothing you can do with them in Photoshop that will make them better.
And you are incorrect…the fact that one page document is 2 megs does not mean the full document will 200. Graphics are linked, not embedded, by default.
Do not embed them.
I’m going to move this thread to the InDesign forum.
Bob

Issue with document text - converting from PDF to Word

I have used Adobe Reader in the past with no issues. Today, I tried to convert a PDF to a word document. It worked, but the text all changed to wingdings font (even though it says it is Calibri). Any suggestions?

Hi marleighp23001196,
Are you facing this issue with a specific file or with other word files too?
Regards,
Rahul

Trouble with png files converting to pdf

Similar Messages

Maybe you are looking for