Trouble with Power Supply

have a question, my mainboard is a KT3 Ultra-ARU and I just got a Antec TruePower 480W power supply and this power supply comes with a 3pin sensor and I connected this sensor to my mainboard but it does not show the speed, what can I do. I have also tried the PCAlert III and the same thing with that.
Thank you

fans spin slow on it,bios 5.4 taslke about fix for slow fans

Similar Messages

How to use the Camileo H30 with Power Supply

Hello
First: excuse my english, im from germany ;)
I have a Camilio H30. its was boughted used. I only got the camcorder & the original battery.
no extras (like usb cable or original power supply)
what i want: i need to film over some hours. The Battery cant make it. so i wanna use it with a power supply but when i put it in (throughh the mini usb a connector) the camcorder goes to charing mode (no actions are possible) but i want to use it fully functionality when power supply is connected.
how do i handle it ??
i got a power supply with 5V an 2,25A , i think its enough... or not??
The Label on the bottum side from the camcorder tells me 5V 2A....
Thanks 4 helping me :D
greetz

oh ok i thought this is possible because in the main manual at the part when the display icons being explaind they show a full, half-full, emtpy- battery and a power connector icon. they call it "gleichstrommodus" sorry i have only the german manual. in english it should be co-corent flow mode or ac power mode.
im looking for a way to make the cam work with power supply only. i dont want to charge or even use the battery because i film over few hours ago and for that i dont need it.
my old dv cam works when the battery was plugged out with ac adapter only. thats very nice for me.
whatever. if this is not possible i sell this cam and buy another one ;)
thanks for your help !

Need help with power supply & graphics card upgrades

I have a HP Pavilion p6320y that I bought 8 months ago. AMD Phenom II x4820 Quad Core processor. I play WoW and since the last big patch, have been suffering with low fps. I updated drivers and followed all the advice given to me by Blizz and finally figured out that my Nvidia GeForce 9100 (integrated graphics) isn't good enough anymore.
I checked my computer and discovered that I have a 300w power supply (12V) and read on another post here that something stronger than 300w is needed to run a decent graphics card.
Now for my questions:
How much of a power supply can I upgrade to without hurting my computer, but will be enough to run a good card?
What would be a good graphics card for this computer?
I've been looking at the Nvidia GeForce GTX 460 1GB GDDR5 PCI Express graphics card and wonder if that will work on my computer. Most of the nicer cards seem to be the PCI Express and I'm not sure if that will work.
Any advice will be most helpful. I have some experience with the inner workings of my PC and would like to fix this myself instead of running to the closest computer shop and paying someone else to. Thanks!
This question was solved.
View Solution.

Well, you are starting out from a fairly low baseline with the integrated graphics. It will not cost much to have a substantial increase if all you want to do is run WoW without error messages. Yes, the 300w power supply is an issue and rules out any card that will require its own power (i.e. needs its own power cord like a hard drive) but there are several mid-grade cards that can run off bus power alone (i.e. just from the pci-e slot itself). Just taking a quick look at newegg.com I see the following:
GeForce 9400 under $50
Radeon HD 4650 under $50
GeForce 9500GT a little over $50
Any of these should get you where you want to be and not require a PS upgrade. The slot you have available is a PCI Express x16 slot so don't look at AGP cards; they will not work. If you want to install the card you mention you need to get a better PSU.

Need Help with power supply reccomendations for my graphics card

hi
i have a MSI GeForce GTX 780 Graphics card... i built my own system, i also got a rosewill rx750 power supply in it which i think is causing me problems, the computer works great until i get into games like titan fall and try and get into a game then it restarts the computer on its own.. has done this with a few games, but it works fine when surfing the net and so forth, i have read its to do with the power supply being week and also read my chosen power supply isnt that good... anyone got any recommendations for me that i should look at or am i looking in the wrong direction with whats wrong with my pc... any help would be great thanks

yes the PSU is the most important choice out there and corsair and seasonic are the best out there! (never buy cheap PSU's as like abvolt said a cheap one can easily kill your more expensive parts)
Cheap PSU = made of the most cheap parts they could get "think cheap shanghai parts are used that may be of any quality good or awful as its just what they could get for the lowest price" (ever bought anything that was super cheap they break very easily)
Quality PSU = the use of good quality well made parts and will have very good testing done on them to make sure they are stable and pass very tight regulations and conform to specs for 10-30 different factors each.
a cheap low quality PSU I class as a paper weight as it will never go near a computer (maybe i would use one as a basic bench PSU for things i do not care if they die or just for testing a fan or something that rubbish dirty power is not really a major problem but silicon is not tolerant to dirty power and will kill parts)

PowerbookG4 Runs on Battery But Won't Recognize/Recharge with Power Supply

My 15" 1.67gh Powerbook G4 will run just fine from battery power. The power supply does not charge the battery, though the amber light does turn on when it's connected. The screen power management display acts as if it's unplugged and doesn't recognize the plugged in power supply.
I have another G$ so can recharge the battery, and the power supply cord works fine in that one. I have tried the 5 second reset method (with the power supply and battery out)
This machine was used with an old battery that caused overheating during the summer to the point where the computer turned itself off.
Is the internal power supply fried? Is there a fuse that can be replaced? Is there some kind of other software/firmware procedural fix that I can try?
How much do these cost if I have to have it fixed? Is it worth doing for a computer this old? Can I just buy the part and try to install it? Is there a way to get it properly diagnosed without spending a ton of money?

There are 4 components to the charging circuit: power adapter, DC-in card, battery, and logic board. Unfortunately there is no automated test to determine what is causing any charging issues, so you have to solve it by elimination.
Since you have a working power adapter that will charge the battery on another PowerBook, that's good. And the system runs on battery power alone, so the battery sounds OK. That leaves either the DC-in card or the logic board as suspect. DC-in card would be the less expensive component to change, as they run $75-$95. A replacement logic board can run $300-$400. Those are used parts prices only without labor.
You could take your system to an Apple store, or better yet call them first, to see if they are even still repairing Powerbooks. If yes, see if you can have it sent to the Apple depot for repair (assuming you're in the US). As long as the case isn't banged up, it should run around $350 to have whatever is wrong fixed. If the case is banged up, it can run into the $650 range as they'll replace the case too. Comes back with a 90 day warranty. If they do the repair in the store, the price goes up... a logic board replacement in the store is around $750, as I recall. If you go this route, ensure you have a hard drive backup too before sending it off.

Problem with power supply and motherboard

I got problem with the cpu.this is the 2nd time my cpu cannot on. It keeps on off. It look likes there is no enough power supply.Last time the cpu also keep restart n there was also problem with the speaker. The HP technician has changed the motherboard.got frustated coz im in high expection on the HP Products. The model itself has problem or only my cpu got problem? Really hope the HP can replace d new one to me rather than the cpu always get problems n stuck my work for 3 to 5 days just to wait the technician comes to solve the problem...Now i have to wait till monday...

Hello @Nazlina,
I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publically post (serial numbers and case details).
If you are unfamiliar with how the Forum's private message capability works, this post has instructions.
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/How-to-check-your-messages/t...
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Need help with power supply.

My computer will not come on at all. When you hit the power switch on the power supply, all the fans in my computer begin to come on for a second but stops. Can someone help me. I 've tried 3 power supplies and none of them worked.
nVidia K89 Neo2
Arctic Cooling freezer 64
TNT2 Rage
Sony DVD-writer
AMD 64 3500+

hammonton
Quote
randyorton 1st Post
My computer will not come on at all
Quote
When you hit the power switch on the power supply, all the fans in my computer begin to come on for a second but stops
Quote
randyorton 2nd Post
That's the thing. It won't come on at all
Its good to help
Quote
I've had this problem before and solved it by clearing the CMOS
but please read the post.

Trouble with power to Apple TV

My new ATV consistently loses power after a few mins. Have to unplug and plug it back in. Thought it might be a defective unit, and swapped it out for another; same problem. It's not power source, b/c ATV is on surge protector with other components that aren't having same issue. Any thoughts?

for troubleshooting try connecting it to another power source all the same

Trouble with power query as import facebook

Hi I am using Windows 7 64 bit with Office 2013 Pro 64 bit. I am using the Microsoft power query add
in 64 bit .
View comment of feed error follow:
DataSource.Error: An unknown error occurred
Details:
https://graph.facebook.com/136807033073095/feed?limit=1000&until...
Please help!

Sorry it took so long for you to get any reply! Are you still having this issue? Could you please provide some more information about the steps you took to get the error?

Troubles with DHCP-supplied LDAP servers

Hello,
this feature does'nt work at all in my environment....
I've a openldap server (RFC 2307) and a couple of macs (newest leopard) which are working quite nice together for a while now.
It's a closed Network and want to get rid of the following commands, which I have to enter on each new mac:
sudo dsconfigldap -x -e -v -s -a ldap.mydomain.de -n "MYLDAP"
sudo dscl -q localhost -create /Search SearchPolicy dsAttrTypeStandard:CSPSearchPath
sudo dscl -q localhost -merge /Search CSPSearchPath /LDAPv3/ldap.mydomain.de
Instead i want to use the possibility to transmit the needed ldap-data using DHCP.
Therefore I've added the following lines to my dhcpd.conf-Server
option ldap-server code 95 = text;
option ldap-server “ldaps://ldap.mydomain.de:636/dc=mydomain,dc=de”;
Booting a mac I've got the following results:
bo-dhcp-228:~ sysadm$ ipconfig getpacket en1
op = BOOTREPLY
htype = 1
flags = 0
hlen = 6
hops = 0
xid = 276885973
secs = 0
ciaddr = 10.0.0.228
yiaddr = 10.0.0.228
siaddr = 10.0.0.78
giaddr = 0.0.0.0
chaddr = 0:1c:b3:b0:e2:d5
sname =
file =
options:
Options count is 9
dhcpmessagetype (uint8): ACK 0x5
server_identifier (ip): 10.0.0.78
lease_time (uint32): 0x5a0
subnet_mask (ip): 255.255.255.0
router (ip_mult): {10.0.0.1}
domainnameserver (ip_mult): {10.0.0.9}
domain_name (string): mydomain.de
ldap_url (string): ldaps://ldap.mydomain.de:636/dc=mydomain,dc=de
end (none):
So far so good.
But the ldap-server never got used.
dscl localhost list /LDAPv3 on the mac-client shows emtpy results, and
on the wire there is absolutely no traffic to ldap.mydomain.de.
In fact the mac-client completely
ignores the dhcp-provided settings. Of course I've enabled the
Setting "Add DHCP-supplied LDAP servers to automatic search policies" on
the client.
I've tried to trace the problem on the client-side by doing
sudo ipconfig setverbose 1
touch /Library/Preferences/DirectoryService/.DSLogAtStart
and looking into /Library/Logs/DirectoryService/DirectoryService.debug.log , /var/log/system.log
and /var/log/com.apple.IPConfiguration.bootp but there is no hint why the client is not using the published ldap-settings.
It must be some problem on the mac-side.
Can anybody give a hint howto solve this problem?
Thanks
Christian

I have not tried to set this up using the command line (as you described), but have in the past done it using "Server Manager" (on the server) and "Directory Access" on a Mac OS X 10.4.x client.
When I did this I found that Macs after booting would not show a list of network login acocunts (as they should have) and typically trying to login using 'other' would fail. Also typically after a minute or two (and several attempts) it usually did work. AppleCare's suggested workaround at the time was to not use DHCP to advertise the OpenDirectory but to instead manually define it on the clients (using Directory Access).
My belief as to why it did not work is that when a Mac boots, it enables its network interface, asks the DHCP server for an address (and the LDAP details) and then in theory should continue to boot and connect to the LDAP server. However I believe that the timing of these events is such that the Mac goes past the LDAP stage before it has finished the DHCP stage and as a result does not have the LDAP information in time. By manually defining the LDAP (OpenDirectory) server in Directory Access it is already known in advance and you avoid this problem.
I have seen nothing to suggest that Leopard is any different in this area (although my recollection is that Panther - Mac OS X 10.3) did not have this problem.
So I use a manually defined entry on all our computers, and I have incorporated this in to the standard disk image I use to build all the new computers.

Odd power supply fault callhome emails on Cisco 2232 FEXs?

We recently enabled smtp callhome for our ucs pod a few days ago. Since then, we've received more than a dozen email bursts about power supply failures in each of the four Cisco Nexus 2232TP FEXs in our pod. In each case, we get a "Recovered" email within a minute or two, and we're not seeing power supply failure emails for any other devices within the UCS pod.
Here's a sample email burst from this morning, showing the subject lines within my email inbox:
System Notification from atl01-ucsf01a-A - environment:major - 2012-10-23 06:01:27 GMT-00:00 Recovered : Power supply 2 in fex 6 operability: inoperable
System Notification from atl01-ucsf01a-A - environment:major - 2012-10-23 06:01:27 GMT-00:00 Recovered : Power supply 2 in fex 6 operability: inoperable
System Notification from atl01-ucsf01a-A - environment:major - 2012-10-23 06:01:27 GMT-00:00 Recovered : Power supply 2 in fex 6 operability: inoperable
System Notification from atl01-ucsf01a-A - environment:major - 2012-10-23 06:01:27 GMT-00:00 Recovered : Power supply 2 in fex 6 power: error
System Notification from atl01-ucsf01a-A - environment:major - 2012-10-23 06:01:27 GMT-00:00 Recovered : Power supply 2 in fex 6 power: error
System Notification from atl01-ucsf01a-A - environment:major - 2012-10-23 06:01:27 GMT-00:00 Recovered : Power supply 2 in fex 6 power: error
System Notification from atl01-ucsf01a-A - environment:major - 2012-10-23 06:00:58 GMT-00:00 Power supply 2 in fex 6 operability: inoperable
System Notification from atl01-ucsf01a-A - environment:major - 2012-10-23 06:00:58 GMT-00:00 Power supply 2 in fex 6 operability: inoperable
System Notification from atl01-ucsf01a-A - environment:major - 2012-10-23 06:00:58 GMT-00:00 Power supply 2 in fex 6 operability: inoperable
System Notification from atl01-ucsf01a-A - environment:major - 2012-10-23 06:00:58 GMT-00:00 Power supply 2 in fex 6 power: error
System Notification from atl01-ucsf01a-A - environment:major - 2012-10-23 06:00:58 GMT-00:00 Power supply 2 in fex 6 power: error
If we were seeing this from just one fex, I'd suspect a hardware issue. If any of the other UCS devices (rackmount/blade servers, fabric interconnects, etc) reported similar issues, I'd suspect a power feed problem within the DC.
But this has me baffled. If it helps, the UCS pod is running firmware 2.0.3c
Cheers,
Paul

Thanks Paul,
It is known ( cosmetic ) issue with power supply model.
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtz84683
The above is resolved in recent version of Nexus 5K switch software. New defect to port the fix to UCSM has been submitted today
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCuc87547
It will take a while to get published on web site.
Even though they are cosmetic, I would suggest you open a TAC SR with UCSM, FEX tech support and above bug IDs so that we can track the resolution.
HTH
Padma

T61 - Power supply wire melting and smoking

Do you guys have any problem with power supply. My wife just called me and she smelled something burning. And power supply wire is melting and smoking.
And I called Lenovo tech and he told me that my machine is just 13-month old and he can't do anything at all.
He just told me replace power supply. I used to have dell and IBM X41 and never have wire burning problem.
Is this normal? If my wife found out little late and buring the carpet still he is going to say this machine is out of warrenty and Lenovo has 0% responsibility.
I told him, I'm going to take picture and post to the internet and he told "I don't care".
Wow what a nice man. He supposed say "Sorry" first then say your machine is out of warrenty...
Anyway, I'll never going to buy Lenovo again.
Thanks
Message Edited by icul4u on 07-10-2008 01:28 PM
Message Edited by icul4u on 07-10-2008 07:13 PM
Solved!
Go to Solution.

icul4u wrote:
I think your computer system has my information.
I don't want to post my personal information here.
Mark didn't ask you to post your contact information in the public forum. He asked you to send him a PM (private message). To do that, click on the little envelope icon at the top of the forum and send the message to Mark_Lenovo Without the information he requested, it will be difficult for him to help you.
I edited your serial number out of your message as it doesn't need to be posted publicly.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

Power Supply on e9150t

Recently my computer started powering off and then back on. It started periodically and now is every minute or two. First I went in and gave it a thorough cleaning of dust and that doesn't work. Based on what I am reading is it may be the power supply? Does that make sense? If so, how do I go about ordering/installing a new one?
Thanks-

Hi,
Try this procedure and see if you can isolate the issue. Trouble Shooting Power Supply Issues. Don’t skip any steps.
If after going the above procedure and you determine that it's a power supply issue then I would recommend the CORSAIR CX500 PSU as a replacement.
These HP How-articles should be helpful.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Mini dock without power supply

Hi, guys,
I'm looking for a second Lenovo Mini Dock Plus 433830U Docking Station, but I don't want to spend $230. Is the dock available without the power supply? If so, where?
Thanks, ZZ

Hi Zipzap:
I don't have one for sale, but I do have a couple of suggestions for you:
1) Just enter the part number into a Google search box, the result returned by Google will be a 'product search' listing prices at various vendors. Lowest price I saw when I did this a few moments ago was $178 (complete, with power supply!) at, of all places, Sears.
2) Try eBay - it's a great place to find stuff like this. Again, just enter the part number.
If you happen to find one at a nice price that is located in Canada, let me know... I need to get a second one.
Michael
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P...

Win 7 wont work without power supply

When using boot camp i hold down option key to boot up win 7 and it works completly fine if the power supply is plugged in. but without the power supply win7 cant boot. its starts up the loading screen then when its just about to get to login screen it goes black. when it is black if i plug in power supply then the screen appears and win 7 works fine but without the power supply im not able to see the screen.
win 7 works every sinlge time with power supply to no problems at all.
the only problem is win7 without the power supply and the screen just shuts off.
any suggestions?

I had the same problem. Then I set the power schemes all back to default. The one think I changed was the screen lighting. After I set the power schemes back to default the problem was resolved.

Trouble with Power Supply

Similar Messages

Maybe you are looking for