Trouble with printing through 10.8 shared printer using lpd.

Hi, hoping someone will have had a similar issue.
I am using a OSX 10.8 mac mini as a print server. I am using it as a print server because because i have clients that print across subnets and bonjour will not work for this application. Previously with my 10.7 imac I had shared the generic printer aimed directly at the printers IP address. Client macs aim at the print server using lpd (using ip or host name) and then the printer name (share) for the queue and also use the generic ppd. When a client adds this configuration aimed at the old 10.7 print server the printer would install and printing would be succesfull. Now with the 10.8 print server a client (reguardless of client OS version) i get the "Unable to verify the printer on your network." when installing and printing fails. I have tried the proper ppd for the make/manufacture of the printer (i didnt think this would make a difference) I have tried using the cups commands as well:
cupsctl --share-printers
cupsctl --share-printers --remote-any
cupsctl 'BrowseLocalProtocols="cups dnssd lpd smb"'
assuming lpd was just not available and needed to be turned on...
I am able to ping the 10.8 on the network from clients verifying they can see the server
also have tried using ipp with no luck.
Anyone else had this issue and if so is there a work around? Thanks!

The Mini prints just fine to the printer. on a side note, I tried to add a "client" printer to the mini server. I added a printer using the ip address 127.0.0.1 (self resolving) and the que name as the share. This didnt work either. Im thinking this must be a cups setting?

Similar Messages

Trying to connect to a printer through a windows shared printer

I have two printers connected to a Windows machine. On that machine I have shared both printers. A Brother and a color HP 3600N. When i go into print setting and try to set them up I can see both.
I connected to the Brother Printer and it is working fine.
I tried to connect to the HP 3600N but the print driver was not available for that machine. I went to HPs web site and downloaded the driver and did the install. I rebooted and tried again. Still the HP 3600N driver was not showing up.
I tried using two other print drivers the 3500 and the 3700. With both I was able to "connect" to the printer, but the printer only printed garbage.
In order to make sure the printer was working with the Mac. I disconnected it from the PC and directly connected it to the Mac. It found it immediately and the 3600N driver appeared...the printer worked fine.
I then disconnected it from the mac and reconnected it to the PC...rebooted etc.
Then i tried to find the printer again. Once again that print driver 3600n was not available.
How can I over come this. I need to have both printers connecting to the PC for now
Thanks
Mark

Look at the printer sharing instructions on the invaluable iFelix Tech Notes site.
If problems persist, check System Preferences -> Sharing -> Firewall -> Advanced and if necessary clear/uncheck the options to block UDP traffic and enable stealth mode; as long as you're behind a NAT router, those options aren't essential. Windows does seem to put out a slew of UDP traffic, and I've found that blocking UDP/enabling stealth mode block my home eMac from seeing the Windows machine to which a shared HP printer is connected.

Hi All, I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain" I run a test print and its se

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

Hi All,
I setup 2 Mac Minis, 'setup in a no-apple id. Now with Mini1 I installed a shared printer from Windows7 Pc it ask for credentials then I input Adminstrator account and the password ticking the remember in "keychain"
I run a test print and its seamless. I reboot the Mini1 and run test print again and its good.
Now in Mini2 I did the same installation on shared printer but it is asking for user credential again and again, there is a check mark in "remember in keychain but still gives a notice that "requires authentication" I put the admin creadentials same with Mini1 then it prints.
every time I print on Mini2 its always asking for a user & password before Printing. How can we fix it.
I tried
- lpd printing = "authentication required"
- reset printer settings ang re-install printer = "authentication required"
- replace sharename in windows7, reinstall printer in Mini2 = "authentication required"
This stuff never happened to Mini1.

Can't print to Windows 7 shared printer from Mac OS Lion

Dear all,
I would like to share my experience battling to figure out how to print to Windows 7 shared printer from Mac OS Lion. Myself had this problem and looking throughly in internet without success. But finally I figured out the solution by myself, hope this can help other Mac user with similar problem.
OK, when I try to setup my new MacBook Pro with OS Lion to connect with my Canon MX308 printer attached to desktop with Windows 7 Ultimate,
1. I simply select System Preferences>Print & Scan.
2. Then looks for the + sign just below the box to add a new printer.
3. From the option toolbar above, I select Windows. I have connect this MacBook with my Windows Network, so the workgroup will appear to the left column.
4. After I select this group, the computer list will appear in the middle column
5. Then after I select the computer which my printer connected to, my printer sharename will appear in the right column
6. Last step is to select the printer I want to use.
7. After that it will automatically put your printer sharename to the "Name". And then I select my printer driver at "Print Using" and find my printer manufacturer which is Canon MX300 series from driver lists. Finish!
My printer appear in the Printers List. But the problem is everytime I try to print there will be error message saying "ON HOLD Authentication Required".
This problem start to kill me, I search all around for similar problem, but the solution was never worked for me!
Until just now I figured out accidentally for the solution.
THE PROBLEM LIES ON MY PRINTER DRIVER!!!! Although I have downloaded the most update driver from Apple site and Apple Software update said there is no more update for my system!
The solution for my problem is Gutenprint Printer Driver! You can download this driver at http://gimp-print.sourceforge.net/MacOSX.php, then select for the latest driver gutenprint-5.2.7.dmg. Install this driver!
Then back to Print & Scan in System Preferences, then right click on Printers List box, then choose "Reset Printing System..." to clear the previous failed printers.
After that, repeat the above step 2 - 7. Only for the last step I need to select the Printer Driver for my Canon MX308 for the driver name : "Canon PIXMA MX300 - CUPS+Gutenprint v5.2.7"
Now I can sleep as a baby knowing that my printer make a friend with my new Macbook Pro! Hope this will help others!

I have the same setup but with a Canon MX850. This did not fix my problem.

Printing to a windows shared printer (Epson Photo 1400) on a AD Network

Looking for help with printing to a windows shared printer but I believe I need instructions for a domain rather than a workgroups??? Trying to print to a windows shared Epson Stylus Photo 1400 from a Mac running OS 10.4.11. Sharing works fine to other PC's an a network using active directory. (there is no workgroup, and I guess there can't be in the way the network is administered) The "address" used on another pc to print to the shared printer is \\111408nw.

Hi dlori, and a warm welcome to the forums!
I think these may help...
http://discussions.apple.com/thread.jspa?messageID=4776616
http://blog.case.edu/djc6/2005/06/22/printingfrom_os_x_104_to_windows_printer_on_activedirectory
http://www.afp548.com/article.php?story=20070108171607985

MacBook - Newbie: Need help on printing wirelessly to XP shared printer

MacBook - Newbie: Need help on printing to XP shared printer
Bear with me please. I read tons of articles on this but somehow as a newbie to MAC (girlfriends sick daughter), I am missing something. 10.5.2
Currently, she can print directly if we plug in the HP Deskjet printer directly via USB to the MACBook. No problem.
When we first got the MACBOOK I tried setting up the MACBOOK wirelessly to recognize the workgroup where the printer was attached via USB to the Windows XP PC. However it printed out garbage since I did not know there was a difference between XP printing and MAC (Gutenberg/gimp printing/drivers).
Now I know there is a difference.
But in reading various instructions, I no longer can find how to connect the MAC to the Windows workgroup. Note we do have a printer set up currently as USB-HP Deskjet on the Macbook (not sure I need to delete it yet).
I went to System Preferences on MACBOOK and clicked on printers, more printers. In the drop down box was CANON, APPLETALK, IP HP printing and Firewire. There was no WINDOWS selection as I saw in other online web instructions.
So not sure how to proceed to find a way to:
1. Connect to Windows workgroup (click on what exactly), step by step please!!
2. Add correct HP Deskjet 5490 printer (perhaps there is one with Gutenberg or perhaps I need Gutenprint-really not sure what I am talking about)
Thanks so much in advance. Fiancé's kid has had her cancer recur in a different place and someone was nice enough to buy her a MACBOOK as a gift.
Sincerely
Peter

ccarbery wrote:
OK...I figured it out...no need to reply. I noticed that there was another Protocol to use to set up the printer on the Mac, I was using LPD, so I switched it to HP Jet Direct-socket, and it prints fine...thanks. I am curious as to why LPD wouldn't work; if anyone has that answer I would like to know...thanks
Any chance of posting the Protocol you used to connect to your printer with your laptop? I'm have the exact same problem printing from my MB. Same error message "..is busy".

Printing to a Mac shared printer from windows 8

How can I print to a Mac shared printer (OS: 10.8.2) from my Windows 8 PC which is using the same Apple network?
Matthias

I have tried using Bonjour on for Windows on Win8 however while it finds the printer and can add it no problem whenever a job is sent to the printer a blank page is printed. The Win8 machine can print to the printer fine if directly connected and the same driver is used when printing via Bonjour so one can only assume it's a "communications" issue between the Win8 machine and my Mac Pro which is sharing the printer.

HPLJ3055 won't print through HPxb3000, but will print if directly connected to dv9000.

HPLJ3055 won't print through HPxb3000, but will print if directly connected to dv9000.

Hey there @pepsitruck
I understand you cannot print from your desktop however, you can print from your laptop.
Could you please run the Print and Scan Doctor again and let me know the results or post a screen image of the results?
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
You can also try manually stopping and restarting the print spooler and try printing from Notepad afterwards.
1. Click Start
2. Type "Services" in the search field.
3. Open SERVICES
4. At the bottom, click "Extended View"
5. Search for Print Spooler
6. Right-click it and choose Properties
7. Select as Automatic in the drop down box, close the Window
8. Right click on Print Spooler and choose "Stop", wait until it stops and then right click again and "Start".
9. Close out of Services and try your print again.
When you get to your response, please include which version of Windows you're running please.
Which Windows Operating System am I running?
Thank you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Trouble with 3d window on ArchiCAD 16 when using Led Cinema Display 27" with GT 330M 256MB connected to my MacBook Pro 15" mid 2010, but runs fine on the attached display.

Having trouble with the messages on mac my friends using it are coming not registered when i try to send them a message

having trouble with the messages on mac my friends using it are coming not registered when i try to send them a message

That's probably because they're not registered.
Messages only works if your friend has an iphone.
There is a workaround that can work, though.
set up an AIM account online.
in System preferences > mail, contacts, and calendars, enter your new AIM account.
in Contacts, on your friend's contact card, look for AIM. Enter their phone number right before that, with a +1 before it, and the area code: i.e., +11234567899.
This doesn't always work. Their cellular carrier has to cooperate with AIM. Some do, some don't. If it doesn't work, tell your friend to get an iPhone.

I HAVE A MAC G5 WITH V10.4 TIGER OS, I AM HAVING TROUBLE WITH THE LETTER "N" ONLY WHEN I USE CAPS AND SHIFT KEYS DOSE IT TYPE THE LETTER "N"SE

HAVE A MAC G5 WITH V10.4 TIGER OS, I AM HAVING TROUBLE WITH THE LETTER "N" ONLY WHEN I USE CAPS AND SHIFT KEYS DOSE IT TYPE THE LETTER "N". I HAVE CONNECTED A NEW KEYBOARD BUT THE PROBLEM STILL EXIST. WHAT ELSE CAN I DO?

You might look at "Keyboard Shortcuts" in the Keyboard and Mouse preference pane and see if somehow the lower case n has been inadvertently assigned to something.
Probably the best solution would be to click the "Restore Defaults" button.

MAC couldn't complete the printing task through the windows sharing printer.

Brief:
A printer HP OfficeJet 5608 conneted with one Windows XP computer via USB. And sharing on LAN.
My MAC, MacBook Air (10.7.4)，can install this shared printer, with it's integrated driver. Everything shows okay.
I can send the printing task to this printer, and the printer do seems responding, but the printing job just can't come out.
The windows has received the printing job, it alawys shows printing, but just can't finish it.
What could this problem be? Please help, Thank you!
Root

Hi Kmanxx,
The update failure might be caused by a variety of reasons such as connection issues, incomplete Components and firewall. For troubleshooting, specific error code of the failure update will be helpful.
You also could find installation failure events and error code in log files, such as WindowsUpdate.log (C:\Windows\ WindowsUpdate.log) and CBS.log(C:\windows\logs\cbs\cbs.log). Here you first want to search for “error” in your logs. This will search for
Error entries. Focus on the day the installation attempt occurred. Refer to your time line of update log, find what error happened. Of course you could post your log content and we’d like to give it a look.
How to collect the specific error code of failure update:
We can do this by viewing your update history.
1. Swipe in from the right edge of the screen (or, if you're using a mouse, pointing to the lower-right corner of the screen and moving the mouse pointer up), and tap or click Settings.
2. Tap or click Change PC settings, and then Update and recovery.
3. Tap or click View your update history.
View failed update error code.
For your reference:
Unable to install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2(also applies to Windows8.1):
http://support.microsoft.com/kb/2509997/en-us
If all updates fail to install on a particular client or if for example you cannot install a Service Pack:
http://blogs.technet.com/b/roplatforms/archive/2011/04/28/installation-failures-cbs-store-corruptions-uncommon-issues-and-troubleshooting.aspx
Fix Windows corruption errors by using the DISM or System Update Readiness tool:
https://support.microsoft.com/kb/947821?wa=wsignin1.0
Regards

WindowsXP printing on a Mac shared printer

Hi. I've seen a lot of posts on a Mac printing to a Windows printer, but not the other way around.
My wife has brought home a windows laptop and she wants to print on our Mac network. I have an iMac set up as a printer/music server with a laser printer connected to it. the iMac is running 10.3.9.
The driver for the printer is built in to XP, but when I try to add the printer, the XP machine doesn't see the shared printer.
On my iMac print server, I have printer sharing on, and Windows file sharing is on too. My Macs have no trouble seeing the printer. It is on an ethernet network, and I've tried entering the IP address of the print server with no luck.
Any ideas?
Thanks,
Mark

The driver for the printer is built in to XP, but
when I try to add the printer, the XP machine doesn't
see the shared printer.
You can't use the XP driver.
Printing to a printer on a Mac from a PC running Windows XP
http://www.ifelix.co.uk/tech/3000.html
Printing to a printer on a Mac running 10.4.x from a Windows PC using Bonjour for Windows
http://www.ifelix.co.uk/tech/3014.html
iFelix

Problems printing Acrobat documents on shared printer

I have a MacBook Pro and a Mac Pro. I also have an Epson 1400 printer.
When I print any Acrobat document using the printer hooked up directly to my MacBook, it prints perfectly.
When I print the same Acrobat document using the printer hooked up directly to the Mac Pro, it prints perfectly.
However, when I hook the printer to the Mac Pro and enable printer sharing, and then print the same document from the MacBook Pro using the shared printer via the network, the Acrobat document is reduced in size by around 50%. I have checked every possible setting and just can't find why this is happening.
Thanks in advance for any help!

The problem occurs not only through Acrobat. The prints have the correct size through the Mac only when the printer is directly connected via USB on the Macs but reduced size through the network. The problem occurs in any printer model on the network.
I do not know how to solve this problem but curiously does not occur with Windows computers with Bonjour that prints to the printers connected to Macs.
When Apple will fix this?

Printing to a Windows Shared Printer in Windows Domain Stopped Working

If anybody can shed some light on the problem below I would be highly appreciative. I have tried every suggestion I've found on ways to fix this problem, including postings found on this forum, without success.
I use able to Print to a Shared HP Laser Jet printer one a Windows 2003 Server machine, which is part of a Windows 2003 Domain. It has been working faultlessly until about a 2 weeks ago. I have had a number of errors including unable to Connect but the Error I get constantly now is:
+Unable to connect to SAMBA host, will retry in 60 seconds...ERROR: Connection failed with error NTSTATUS_NOMEMORY"+
I have reset the password of the windows user that originally made the connection when the computer was set up and this password had special characters. After reading various posts I have tried:
1. Reseting that users password without special characters, deleting the printer and adding it back in using the same user and the new password. The same user can map and connect to windows Shared Directories on the same Server and open and edit files
2. I have reset the Keychain to make sure it was using the new password. Again deleted and re-added the printer.
3. Created a new user both on the domain and one the print server deleted and re-added the printer using each user while also reseting the key chain
4. Tried the Advance option on the Printer Setup Utility using the following SMB URL format,
smb://user:pass@Domain/Machine/Printer where, the domain is called "home", the machine name is "Devserver01" and the printer share name is "HPLaser" resulting in a smb URL of smb://shanep:xxxxx@Home/Devserver01/hplaser.
None of the above work!
So as a new MAC user I have absolutely no other ideas of where to look for additional information on what is happening i.e. where do you look for log files that may contain additional detail.
Can anybody assist on suggesting any other things to look for or check?
Thanks
Shane

Hi Greg,
Thanks of the tips. I have just managed to get it working and I didn't use the LPD method but tried a few different smb URI's.
Here's what I found worked.
1. I created a standard user account on the Windows 2003 server on which the printer is connected and shared, i.e. a non Domain user name that is local to the server only and not the domain
2. I then used this user name and password, along with the IP address of the server in the URL i.e.
smb://user:password@IPofserver/hplaser.
3. Printed a test page successfully
I then tried variations of a theme using username and passwords on the domain, changing the @workgroup/server/printer with no success.
I could however replace the IP address with simply the @Server/Printer combinations using he local user name and password successfully.
I also installed apple and Unix printing and file services so whether this made the difference I'm not sure.
Interestingly I tried to add the mac to the LDAP/Active Directory and couldn't successfully bind to the directory. Not that I'm an AD expert, but I have configured a few Java applications to use LDAP/AD authentications and groups of late so this problem is a little unusual, but that aside, thanks for the pointers, Printing problem solved. now to solve the AD one
Shane

Trouble with printing through 10.8 shared printer using lpd.

Similar Messages

Maybe you are looking for