Trouble with sdhc card on bb curve 9330

hey, so i just got a sandisk sdhc card. 4gb. i put it into the back of my phone and it's not showing there is a card on the devive. i tried rebooting it a couple times and still nothing. does anyone have any suggestions on the what the problem might be? thanks.

Hi and welcome to the forums nihilist211!
A couple of places for you to visit: Blackberry 101 Tips & Tricks
Have a look at this kb article: Enable mass storage mode
Let us know how it goes..........
Great to have you here!
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

Similar Messages

Problem with SDHC card

Hi, have tried using a Kingston SDHC 8GB card, but neither my iMac running Tiger, nor my MacBook running Leopard will recognize it. I've tried 2 different SanDisk readers, both state that they are SDHC and Mac compatible. Nonetheless, the card refuses to mount or be recognized. No recognition in System Profiler, nor Disk Utility. Is there something I'm missing? Is there a driver out there? Google was no help, and a search of a number of Mac forums wasn't either. I know others have had this problem, but there doesn't seem to be a ready answer.
Thanks,
tjh

I am also having problems using 8G SDHC with my iMac:
I have two new 8G SDHC cards, one Transcend and one Adata. I used these cards with my Panasonic SD-1. When they were brand new, I was free of trouble having my iMac recognized them, created image and loaded the video into iMovie. However, when I tried to erase these cards using disk utilities, it said formating failed. Then the volume has gone and iMac no longer be able to read it or mount it. When I tried to erase them, the partitioning began and then it stuck forever.
I took these cards back to my SD-1 or my window PC, they could be formated again and used properly. But when I brought it back to my iMac, they still could not be recognized or mounted. In the disk utilities, they could be shown as 7.5G Generic Media but then nothing could be done.
Is there anything I am missing? Any utilities I can try to bring them back to work with iMac?

Satellite L755-16J - Trouble with sound card

I currently own a Toshiba *Satellite L755-16J* and it is having some sort of trouble with the sound card, i think.
When i bought it, it came with windows 7, i changed the windows to windows 8 and since then the audio has been troubling me.
The internal speakers work for a minute or two when i play an audio file but then stop working.
i had been using an external usb soundcard and external speakers for some time but decided to switchback to windows 7 for the sound to work properly again. even though i have switched back to win 7, the sound still doesnt work.
I am quite sure that the problem is not in the internal speakers because they do work, although just for a brief moment but they work, so i am guessing the problem is in the software instead of the hardware.
i tried updating the sound drivers but they seem to be up to date, according to windows the drivers "seem to be working properly"
Can anyone help?

> even though i have switched back to win 7, the sound still doesnt work.
How did you do that?
Did you use the Toshiba Recovery Disk in order to install Win 7 or did you install the Win 7 using fresh and clean Windows 7 disk?
The notebook supports Conexant sound chip. The sound driver is available on the Toshiba EU driver page and in case the sound chip is already recognized in device manager after the sound driver installation, I assume the driver has been installed properly.
In such case I would recommend you to connect the headphones.
In case the headphones would function properly, the speakers might be affected. I mean the hardware. But of course its only an idea.
Beside the headphone check, you could check also the settings within the control panel -> sound -> playback tab.
Usually the speakers should be set as default device.
Check this option too.

Satellite 5100/201: trouble with video card or overheat?

Hy,
I'm experiencing trouble with video on a Satellite 5100/201. It seems that when I press on the left side above the graphics card or press a key on the keyboard on that side, the screen starts to be scrambled and vertical lines appear. At the end windows XP resets giving a critical error on the device and the video passes to 640x480. Same thing occurs when running Linux Suse 9.0.
My doubt is what is the cause: the graphics card corrupted or overheating due to the fan not as efficient as originally (my laptop is almost two years old. Did someone succed in finding the cause and resolved the problem, also with the Toshiba assistance?
Any help welcome.

Hi,
I don't think so that Toshiba has problems with the design. You are talking about two different models with two different hardware and for different user profiles!
The 1900 is a Desktop replacement notebook with "desktop" components like processors and the Satellite 5000 is a Multimedia notebook!
Hint: If you had not done it yet, perhaps you could install the graphic card driver once again. If this don't helps, it is the best way to recover the notebook with the Toshiba CD. (this set the notebook to software default settings and the notebook should be work)
Bye Bob

Will camera connection work with sdhc card

I just got a camera connection for my new ipad and I have a sdhc card and it is not reading it. Does it not support this card?

That certainly sounds like it is the correct setup. When I use my card with the iPad, it opens the Photos App right away. If a restart doesn't help, you may need to do a reset. To do that, tap and hold the Home button and the Sleep/On/Off buttons at the same time for approximately 10 - 20 seconds, until the Apple logo reappears. Release buttons. No content will be affected.
Stedman

Troubles with graphic card driver at Equium A60

Hello everybody,
At first sorry for my bad English.
I have some trouble with the driver of my graphic card. After a new installation I just wanted to install the driver of the ATI Radeon 7000 (I have an Equium A60), after this I had to ascertain that my pc was out of order. The trouble was because the driver, I'm sure, because after a new installation, without the VGA-drive, my notebook is working, somehow.... I mean, I'm sure it could work better if the graphic would have an own driver.
I have been searching on the web and I did see that this was not a new problem; many people have the same trouble with it. Somehow, the pc's own driver is not compatible.
Could anyone help me to find a solution for my problem?
Thanks a lot,
Eurytheus

Sorry my friend but your posting sounds really unbelievable. Original Toshiba driver is not compatible with the hardware. It can not be. It can not be the truth!
Your notebook model is almost 4 years old and I presume Toshiba have had enough time to react if display driver is somehow problematic. I recommend you to back up all your data and try to install your notebook using original recovery image. If there is no hardware problem notebook should work well again.
Sorry but I do not see any other solution there because the driver is definitely tested and it must work well.

A20m Trouble with Ethernet Card and the Internet

I have a A20m Thinkpad that is not connecting to the internet. At first my problem was that I did not have an ethernet card as detailed on this forum post.
http://forums.lenovo.com/t5/Legacy-ThinkPads-A-I-V-300-600/A20m-Network-Controller-Driver/m-p/219725...
Thus I bought this ethernet card and installed it.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=190223756432
From what I can tell I installed it correctly and then I preceded to install the drivers for this card. The ones located on this page.
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-4K4PWT
It seemed to work well and the controller shows up in hardware devices.
That went well, but I still cannot connect to the internet. I thought it might be the card itself but after running the 3Com NIC Utilities that came with the drivers it said that there were no problems with the card.
Also of note I have noticed that there are no lights on the port where the ethernet cable is plugged in. I am not sure if there should be. Any help people could offer would be most appreciated. This Thinkpad is running windows XP.

Called them up today and basically I got them to pay for shipping this time. They told me they did not have any more new ones of my model and are not willing to ship me a suitable new replacement model after all this trouble and just gonna keep on shipping me refurbished until we find one that works (the heck? ...his quotes). So basically by the time I get my 2nd refurbished replacement (and assume it actually works this time) my computer would been down for over 2 months.
I am currently saving up for a 9800gt from evga since they are budget priced now (heard they actually have a good customer service and good quality cards) and based on my experience with MSI I can't recommend their products to anyone now sadly.
Hopefully MSI will send me out a tested a verified to word refurbished card this time.

Camcorders with SDHC cards and DvD memory

Forum,
My camcorder suffered an unfortunate accident two days ago and needs replacing.
If i buy a replacement camcorder with a SDHC memory card or a DvD will I be able to download to FCP and perform all the editing and associated functions in Color,Motion and shake etc?
Thank you,
Michael Craven.

Hi,
I suppose you were happy about the image results delivered by your camera (which is/was?).
FCP does not offer native AVCHD support yet (If FW connection is available you might Log&Transfer your AVCHD footage in FCP, depending on the camera model), but iMovie 8 in an intel machine can ingest AVCHD even through USB. Obviously you will have to convert your captured media into a suitable QT format to be edited in FCP and all that jazz!!
If you have to choose between SDHC and DVD I'd say you should go for SDHC. More storage space and more chances of getting those NLE software a wee more friendly.
BTW. Vegas 7 AND 8 offer good support for AVCHD.
Hope that helps.
G.
G

Trouble with Ati cards - new with recent update.

Hi folks
I have been using Arch for > 3 yrs now and it has been a work horse. I installed it on kids computer over a year ago and has been trouble free. Recently I did a sync and since then the xorg started giving problems.
I have a Ati Radeon 7000 PCI video card on it. It worked with out any trouble till recently. Now it starts ok but every few seconds or so screen goes completely blank and then reappears. Nothing in the logs and no complaints even when I start xinit/startx from command line.
It appears as if monitor connection was loose if I did not know that was not a problem. It is most pronounced when ever there is a lot of screen refresh to do, such as a menu item sprang open a lot of submenus, a new window opened or closed and so on. However this is pretty much disabling because you can;t see anything on the screen for long enough to use it.
I tried changing the driver, installed Catalyst - eventhough catalyst works ok, it's resolution is lower and looks poor ? I tried removing all the usb peripherals and tried one by one with the same problem persisting. Installed a clean Arch on another partition and as soon as radeon driver was installed it started giving same problems. I tried latest puppy and despite installing radeon driver it still worked fine and did not flicker like Arch. However I don't like puppy for this purpose and hope to maintain Arch.
Is there a way of figuring out what causes these flickers and rectify it. I put PCI=nomsi on kernel command line to turn off kernel mode setting. Tried /etc/modprobe.d/radeon.conf with modesetting=off, tried removing stuff off from /usr/lib/xorg/modules/dri/*. None of these made much difference.
Any help greatly appreciated.
sk

I kind of solved it for now.
Try " X -configure" to create a new xorg.conf.new file and move it to /etc/X11/xorg.conf.
Edit the /etc/X11/xorg.conf and under the video card section put a
Option "NoAccel" "On"
At the least it is not driving me crazy with blinking and flickering.

MSI K7N2 Delta ILSR (MS 6570) trouble With ATA card

Hi, i have major trubble.
Ihave two 300gb, two 120gb and two 80gb harddrives + 1 DVD burner and 1 CD burner with ultra DMA 100 PCI card and it works fine without using the sata or ide3 raid function. I purchased an new PCI ATA 133 card and the system won't boot. I have tried for an long time to get the raid function to work but wihtout results with my old ATA 100 card (it works when i unplugg the ide cable from ide3).
Is there anybody that knows with type off PCI ATA 133 card that works or how too coop whith this problem.
I've got the latest bios ver. 7.8 but no difference
AMD XP2800+
Kingston 2x512mb
ATI Saphire Radeon 9600pro 256mb
Soundblaster Live Value
XP pro sp2
MSI K7N2 Delta ILSR (MS 6570)

I went to JME-Data and purchased an
True430
ATX 430 Watt Power Supply with PFC
For AMD™ and Intel® systems including
Pentium® 4
Dedicated output circuitry
Voltage feedback
Antec Low NoiseTechnology
AQ3 - Antec 3 year parts & labor warranty
True430 is a 430 Watt 6-output, dual fan-cooled ATX12V (Baby AT or PS/2 Size) power supply designed for personal computer or industrial applications.
Its ATX12V compliance allows its use with the latest Pentium 4 processors while its backward compatibility ensures its usability with any ATX-based AMD™or Intel® system
The prise 1099:-
And everything works great, Thank you very much for the tip. :-)
No more blue screen and it even works with my memory Kingston Value Ram 2x512 ddr400.
Is it possible to change the FSB from 166 to 200, and what should i think about before action. Like i said before i have an xp2800+
Alltså är det möjligt att få cpu gå på samma frekvens som minnena om man ökar FSB har några tip så är jag tacksam.
Att en nätdel kan göra så mycket helt otroligt TUSEN TACK för hjälpen till och med cpu tempen har sänkts från ca 56 till 46 grader fattar ingenting.

I'm having trouble with WiFi on my Blackberry Curve 8520?

I am currently using a Blackberry 8520 Curve, and I am using it without a data plan. So, I use internet by using WiFi.
However, I have found that when I am using internet it will often display 'Unable to find the requested server'. The browser is set to Hotspot, and connections on other devices such as laptop work fine.
The only way I can get internet working again is to go to 'Manage Connections', and switch WiFi off and then back on again. Only then does it start working. If I leave WiFi switched on, the connection eventually times out.
Has anyone else had this problem and how can it be fixed?

Ok, you did.
Then try this, delete the WiFi profile for you router, do a simple reboot (With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot) and then set up the router again.
Give it a few days and see how it worksl
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Trouble With graphics Card

       Well i have some kind of problem with my t500 its 208959u. I did not get the computer my uncle did. I checked the specs and 208959u come with only one graphics card but if its customized i think can come with a switchable card. When i do a system tests it registers 2 grapics cards. One is a itel 4500 mhd the other one just says its intel 4 series express.
      I can't do anything with the other card it doe not even have driver bios. I'm hoping this is some kind of graphic driver labeled wrong. If so how can I find out what the 2nd card really is, so i can use it. Im hoping its some kind of radeon cause i really one play my games.
       My question is how do i find out what cards i really have or how do I make my graphics cards switchable.
Solved!
Go to Solution.

your laptop only has one graphics card, it is the intel 4500 MHD.
The switchable model has the Intel 4500 MHD and the ATI GPU.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

K9A2 CF-F troubles with graphics card

My specs are in my signature. This is a new build. Everything went without a hitch until I tried to install my video card.
I'm getting the following error in the Device Manager: Code 10 "device cannot start"
When I boot up the computer tried to load CCC and then displays an error message like "Ati device no present or drivers are not working properly..."
This is what I've done so far:
1) Tried a different video card -> same error
2) Uninstalled and re-installed video card drivers (and different versions) -> same error
3) Tested PSU with a voltmeter -> same error
4) Set motherboard to "failsafe" and rebooted -> same error >:(
5) Tried it with 1.3 bios and 1.5 bios -> same error
6) Tried video card in second PCI-e slot -> same error
7) Tried it with drivers on the install disk and with updated drivers via MSI Update -> take a guess
Here's the kicker: this is my second board.
I RMA'd the last one because of this issue. NOW, I'm thinking "user error". I'll gladly eat crow if I could just get my video card to work.
Help please.
mizzer

Quote from: Fredrik Åsenius on 18-April-08, 02:07:14
Either you have something creating a short, or there is something else preventing detection of the ATI card, like not seated properly. You do have motherboard drivers installed, I suppose.
How about something from the old school? Put the initial ATI installation CD in. Enter Device Manager, choose to update the driver for the graphics card, and point it to the CD.
Thanks for the feedback but I tried that already. The driver clearly installs but the error comes up after I try to start CCC. Also, the display property tags are not present (via 'right click' Properties from desktop) Thing is I get the same error with the 8800GTS (Code 10 device cannot start). I'm hoping it's a simple OS error that will clear up when I reinstall tonight.
I'll let you know.
mizzer

K410 trouble with Graphics Card

I cecently purchased a PowerColor Radeo HD 7850 2gb graphics card and cannot get it to work with my system.
I have a lenovo K410 I will get more details as to my spesific configuration when I get home from work.
I purchased a power adapter to get power to the card but I am getting no output. The integrated intel hd graphics turn off as they're suposed to when I have the card attached, but while the fan on the new card spins I am getting no output. Is the card incompatible with my system? Do I need to upgrade my power supply? Any help with this would be greatly appreciated.
Also if this card won't work with my system can anyone reccomend a 2gig card that will work with it. I can find lenovo part numbers on reccomended graphics cards in the manual, but I can't seem to find a way to corispond the lenovo part number to any real world part that I can purhcase.
Thanks for your help!!
-Jon

hi jmeany,
Welcome to Lenovo Community Forums!
Make sure that your Power Supply matches the Video card's Requirements.
Can you try Neokenchi's suggestion in this thread,
http://forums.lenovo.com/t5/Lenovo-3000-and-Valueline/H520-with-ATI-Radeon-Graphics-card/m-p/1219414...
Spoiler (Highlight to read)
Your problem might be similar to this thread (this is for a K430 dssktop but same aspects apply). Try the fix that ParadiseDecay have posted as other users found it helpful.
The solution was to set the following in the BIOS:
Security Tab:
Secure Boot = Disabled
Boot Tab:
Boot Mode = Legacy (if applicable)
Boot Priority = Legacy First (if applicable)
CSM = Enabled
Your problem might be similar to this thread (this is for a K430 dssktop but same aspects apply). Try the fix that ParadiseDecay have posted as other users found it helpful.
The solution was to set the following in the BIOS:
Security Tab:
Secure Boot = Disabled
Boot Tab:
Boot Mode = Legacy (if applicable)
Boot Priority = Legacy First (if applicable)
CSM = Enabled
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Having issues with your Card Readers in Windows 7 not working? Here's resolution!

You do not need drivers for the card reader. There are NO Windows 7 drivers.
(1.) Click on the Start button and then choose Control Panel.
(2.) Click on the Administrative Tools a window will open.
(3.) In the Administrative Tools window, double-click on the Computer Management
(4.) When Computer Management opens, click on Disk Management on the left side of the window, located under Storage.
(5.) This is where you will see Drives listed. The Card Reader will be listed as 1-4. Just right click & assign Drive Letter.
Right click on each of the drives 1-4 and assign a Drive Letter. Now place your SD card in the correct slot and an a pop up for auto play will show. Now you reader works and will also show when you open COMPUTER it will show them as removable drives with proper drive letters. It took me several days to figure out after no help from HP or internet search. So when found the drives listed I just right clicked saw assign drive and it worked. Hope a lot of people searching on internet find this reply so that it will help them get there card reader working again under Windows 7 because even there tech's don't have an answer. Well good luck because this will work!!!

owj wrote:
I followed the steps but did not see drive 1, 2, 3, 4. I see C; Jbackup drive, D: CD/DVD. I'm still not able to get the card reader to recognize an inserted card.
HP notebook 10''
I'm having trouble with my card reader. I been thro steps mentioned in HP forum but only C:drive is listed .
I had a problem with the hard drive earlier this year had to reinstall windows 7home premium from a disc unable to activate system restore.
Ian Barrow

Trouble with sdhc card on bb curve 9330

Similar Messages

Maybe you are looking for