Trouble with sending emails with Road Runner

I have had little luck with sending email from my iPad with Wifi through my Road Runner Account (Central Florida). Apple Support got it to work with the AT&T 3G set as a secondary Outbound server, but I am still looking for a way to send emails with RR with WiFi. The problem may be that there is no way to turn off the authenication feature in the iPad mail setup, and RR here does not require or permit authentication for its outbound mail servers. Has anyone had this problem and found a solution? Why is there not a selection available in the setup for "no authentication" since I can see that there are accounts which do not support it?

If you had the AT&T network set up and on, and the RR still did not work, there must be another problem with sending emails through RR than I have guessed. I have thought the problem was the incompatible Authentication setting, but if you had the AT&T on as an alternative, that should have resolved the Authentication issue. In any event, I have discussed with Bright House (RR), and they do not seem to acknowledge any compatibility issues with the iPad. Hopefully, it can be resolved.

Similar Messages

Problem with sending email with application object

I am facing some problem when adding and enhancement for IW52(PM notification). The requirement is that when the user click SAVE button, send an email to some users, the difficulty is that there should be an attachment with the Notification itself. It means that when the user recieved the email, he can click this attachment and go to transcation IW53 to view this notification.If any one can help, I will be very appreciate.Thanks a billion, and it will be great help if you can add my MSN [email protected] Waiting for your reponses.

Hi,
One of my colleague worked on such an requirement but I believe it was not the enhancement.
I don't think you can achieve this without workflows.
Regards,
Atish

How i can send email with attachment ?

any body can help me ..............??????????????????

Hello,
please, use "Search" utility in the forum before ask something like this...
I've just tried with :
"send email with attachment"
and ... you have the solution in the first result...
Regards,
Jose.

I am have trouble sending email with an attachment?

I am having trouble sending emails with an attachment. Does anyone have a solution to this problem?

Impossible to answer with information provided
Allan

I have trouble sending email with my yahoo account

I have trouble sending email with my yahoo account .

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

Trouble Sending email with Mail.

I just upgraded to Lion 2 weeks ago and now after a power outage (2days out) I am having issues sending emails with my desktop (ethernet- hardwired). My Laptop was fine yesterday (wireless) but not working today. Any suggestions?
Thanks for your time and advice.
X

Well, since your iPhone receives perfectly, use it as the model to set up your iPad and MacBook Air.
On your iPhone, check Settings > Mail, Contacts, Calendars > (your Yahoo account). Check the Incoming Mail Server settings, particularly the host name and server port (if you have that, it may be under "Advanced").
Make sure they're set the same on your iPad. On your Mac, in Mail, go to Mail > Preferences > Accounts and look under your Yahoo account.

Send Email with Attachment in BSP?

Hello,
 I have trouble about sending Email in BSP .
 I don't know how to Send Email with attachment in BSP . Please give me some advice .
 Thank you very much!

Here is a sample application..
Layout
<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title="Send Mail with Attachment " >
 <htmlb:form id = "form1"
 encodingType = "multipart/form-data" >
 <htmlb:label for = "MAILTO"
 text = "Mail to" />
 <htmlb:inputField id = "MAILTO"
 size = "20"
 value = "<%= mail_to %>"
 type = "string" />
 <htmlb:fileUpload id = "myUpload"
 onUpload = "HandleUpload"
 upload_text = "Attach"
 size = "90" />
 </htmlb:form>
</htmlb:page>
</htmlb:content>
Page attributes:
mail_to TYPE ADR6-SMTP_ADDR E-Mail Address
 Event handler OnInputprocessing..
DATA: fileUpload TYPE REF TO CL_HTMLB_FILEUPLOAD,
 file_content TYPE XSTRING,
 file_length TYPE STRING,
 file_mime_type TYPE STRING,
 file_name TYPE STRING.
fileUpload ?= CL_HTMLB_MANAGER=>GET_DATA(
 request = request
 id = 'myUpload'
 name = 'fileUpload' ).
if fileUpload is not INITIAL.
file_name = fileUpload->file_name.
file_mime_type = fileUpload->file_content_type.
file_length = fileUpload->file_length.
file_content = fileUpload->file_content.
mail_to = request->get_form_field( `MAILTO` ).
* Send mail part..
CLASS cl_bcs DEFINITION LOAD.
DATA:
 lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
lo_send_request = cl_bcs=>create_persistent( ).
* Message body and subject
DATA:
 lt_message_body TYPE bcsy_text VALUE IS INITIAL,
 lt_att_content_hex type solix_tab,
 lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
APPEND 'Dear Vendor,' TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Please find the attached report.'
TO lt_message_body.
append ' ' to lt_message_body.
APPEND 'Thank You,' TO lt_message_body.
lo_document = cl_document_bcs=>create_document(
i_type = 'RAW'
i_text = lt_message_body
i_subject = 'Visit report' ).
data: data_tab type solix_tab,
p_data type XSTRING.
* Pass the data of the document we have uploaded..
p_data = file_content.
call function 'SCMS_XSTRING_TO_BINARY'
 EXPORTING
 buffer = p_data
 TABLES
 binary_tab = data_tab.
DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
TRY.
 lo_document->add_attachment(
 EXPORTING
 i_attachment_type = 'PDF'
 i_attachment_subject = 'Visit Report'
 i_att_content_hex = data_tab ).
 CATCH cx_document_bcs INTO lx_document_bcs.
ENDTRY.
* Add attachment
* Pass the document to send request
lo_send_request->set_document( lo_document ).
* Create sender
DATA:
lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
l_send type ADR6-SMTP_ADDR value '[email protected]'.
* Set sender
l_send = mail_to.
lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
lo_send_request->set_sender(
EXPORTING
i_sender = lo_sender ).
* Create recipient
DATA:
lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
** Set recipient
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
lo_send_request->add_recipient(
EXPORTING
i_recipient = lo_recipient
i_express = 'X' ).
* Send email
DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
lo_send_request->send(
EXPORTING
i_with_error_screen = 'X'
RECEIVING
result = lv_sent_to_all ).
COMMIT WORK.
endif.
Hope this will be helpful.
Raja T

TS3899 Cannot send email with new iPad air. Works fine with old iPad and iPhone.

Cannot send email with new iPad air. Works fine with old iPad and iPhone. I have deleted account and reinstalled.

Thanks. I got the problem fixed. Spent time with the Apple folks and was kicked up to a senior advisor. It seems the problem was with my internet provider - Tmie Warner. Remember I could use the old ipad and the iphone to send mail. I checked all the specifics between the three units. It seems that TW is changing over from the RR.com to TWC.com. Since the new ipad air was just set up, it fell under the new TWC mail specifics.

How do I use my iPhone's hot spot to send email with Mail ?

Hi,
My land line is dead ... so no phone nor internet at home. But I can use my iPhone'hot spot to get on the web from my iMac. Great ... it works !
Oups ! I cannot send email from my computer using my iPhone's hot spot with Mail.
How do I do that ?
Regards.
Robert Lespérance

Hi Templeton Peck,
Thanks for droping in my thread ...
Doesn't the fact that I can surf the web with my iPhone's hot spot and that I cannot use Mail normally has I normally do give you a clue what the problem could be ?
What other information can I give you other than normally I can surf and send email with my regular ISP. Now that my ISP is dead I am using my iPhone's hotspot to surf the web awaiting that my ISP's connoection returns. Surfing is OK but I cannot send emails with through Mail.
When I want to send an email from my computer, I get a message asking me to select the the SMTP server. Then I select my usual ISP server, but the message comes back telling me it does not work.
Is there any other configuration to do ?

I'm not able to send emails with mail.ru. Receiving and reading is not a problem. When I create a email with mail.ru its not possible to send it although its stored in my mail.ru account as "still to be send". What can it be??

I'm not able to send emails with mail.ru. Receiving is not a problem. Creating a mail is also not a problem and the mail will be stored at mail.ru as still to be send, only problem is its not possible to send. I noticed the buttons for sending change colour when used but they don't perform. What it is?

Don't know what changed, but all of a sudden able to send emails by mail.ru ...... sorry for bothering.

I have 2 email accounts the second one i have only recently added, i have sent one email from my second account but i cant seem to send anymore, it says "cant send email with selected server" i am still able to send emails from my first account. Any ideas

I have 2 email accounts, the second i only just recently added, i was able to send an email from this account after i added the account but am not able to send anymore emails. It says "unable to send email with selected server" there are no other servers to choose from. please help! TIA

Hi apmichael,
If you are having issues sending email from one of your mail accounts on your iPhone, you may find the following article helpful:
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
Regards,
- Brenden

I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to sen

I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to send emails with photos embedded. I like adding the frames and backgrounds and I think it's easier for recipients to look at the photos. Thanks for any suggestions of things to try.
Gail

I had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.

Problems sending emails with iPhone 3G and outlook exchange

I have a problem sending email with exchange. Receiving and answering mail works fine and calender updates work fine. However when I initiate an email from the phone it syncs and ends up in the sent folder in the computer but never reaches the recipient. I have tried this many times with different recipients and phones. It only happens from my iphone and ipad. Any suggestions?
Any help much appreciated

The iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
Message was edited by: ethanm

Is there any problem to use multiple threads to send email with JavaMail

Dear all,
I am using JavaMail 1.3.2 to send emails with SMTP, it works very well for a long time.
But one day, I found that the email service hanged and I could never send email again until I restart the tomcat. I found that the reason was a deadlock had been created, the required resource for sending email had not been released.
I guess the error is due to multiple threads are sending email at the same time. I made a test to create seperate thread for sending each email. After few days, I found this deadlock happened again. So, my question is: Can I use JavaMail with multiple threads? If not, I may need to sychronized all the thread that using JavaMail. I would like to make sure this is the reason for causing the deadlock problem.
Here is part of my code for using JavaMail:
transport = session.getTransport("smtp");
transport.connect(email_host, smtp_user, smtp_pass);
message.saveChanges();
transport.sendMessage(message,message.getAllRecipients());
which is very standard call, and it worked well for a long time.
Here is part for my thread dump on tomcat:
(Thread-339)
- waiting to lock <0x5447c180> (a sun.nio.cs.StandardCharsets)
(Thread-342)
- locked <0x5447c180> (a sun.nio.cs.StandardCharsets)
It seems that these happened after call the method transport.sendMessage() or message.updateChanges()
, and the underlying implementation may require the JRE StandardCharsets object. But the object had been locked and never be released. So, the sendMessage() or updateChanges() can't be completed.
Please give me some helps if you have any idea about it.
Thanks very much!
Sirius

Note that the Nightly build gets updated daily (and sometimes more than once in case of a respin) and it is always possible that something goes wrong and it doesn't work properly, so be prepared for issues if you decide to stay with the Nightly build and make sure to have the current release with its own profile installed as well in case of problems.
See also:
* http://kb.mozillazine.org/Testing_pre-release_versions
*http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
*http://kb.mozillazine.org/Shortcut_to_a_specific_profile
*http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Sending emails with both body and attachment to multiple recipients

I have a requirement to send email with body and attachment to multiple recipients.
Body of the email is a standard text. It is a proxy-to-mail scenario.
Here is what I've done: (I'm using PI 7.11)
One mapping from Source to Target structure (format of the attachment text file)
Second mapping from Target Structure to Mail Package format.
In the second mapping I'm concatenating the output of first step into "Content" of the Mail Package.
"XIPAYLOAD" is the message protocol used.
The "Keep attachments" option in the Mail adapter allows only to send "Content" as attachment or as body of the email.
How to send an email with both content and text?
The other problem is even with using ASMA, I can't send email to multiple recipients. I can only do CC and TO for 1 person each - a total of 2. Although I can resolve this by creating mailing lists, it is better if this can be addressed in PI.
Thanks for any input you can provide!
Edited by: crazylad on Jan 18, 2012 3:39 PM

Thank you for your response Mikael.
For the first question, I was able to find the solution in the following blog:
XI Mail Adapter : Dynamically building attachment and message body content using a simple UDF
(I just needed to search with the right set of key words )
The key is to set the "Content Encoding" as "None" in the mail adapter. If this is not done, the mail will be sent with an attachment - untitled.bin containing both the mail body and the attachment text. Also, don't forget to check the "Keep Attachments" checkbox in the mail adapter.
Multiple recipients could be added by separating the email IDs with a Comma. I have used ASMA to set the recipients.

Trouble with sending emails with Road Runner

Similar Messages

Maybe you are looking for