Trouble with setting SLD connection of Preview J2EE + ABAP NW04s

Hi,
I am trying to connect both J2E and NSP to SLD. J2E has connected correctly.
In visual admin, I created new entries in Jco RFC provider, (SLDAPI_J2E) the gateway/host = abap system.
In Sm59 I created new connection to with the program name = SLDAPI_J2E and the connection looks good.
But RZ70 will dump regardless of any entry I try. "Could not open rfc connection"
Any idea?
Thanks

Good morning,
We have exactly the same problem.
Have you find solution ?
Regards, Emmanuel

Similar Messages

Trouble with setting up the network connection

I am having trouble with setting up my network connection on my new laptop, we use a telecom xtra broadband connection for our windows computers in the house. But when i try to put what i think is the right information in the set up it comes up with "network connection could not be configured"

Hi,
you can not connected to sap on 127.0.0.1 ip address it is loopback address for local host.
instead of give the ip address where sap is running.
if you running SAP on your standalone PC/laptop then you need to assign one ip address to that host
use this ip address to connect.
regards,
kaushal

I am having trouble with the initial connection. I have isolated the problem to the cable/ connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

I am having trouble with the initial connection of the apple tv. I have isolated the problem to the cable/connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

There are only two types of HDMI cables (standard and high speed - listen to all 1.2, 1.3 etc etc nonsense they will try to tell in the store) both types will work with the Apple TV.
The cable may be faulty though, have you got another to try, what exactly is happening.

I upgraded Lion recently to 10.7.3. Since that time I am having trouble with my wireless connection. All other devices are fine, but I keep losing the connection since the upgrade.

Recently I upgraded Lion to 10.7.3. Since that time I have been having a lot of trouble with my internet connection. I keep losing the connect and have to go to diagnostics and turn it back on. Is anyone else having this problem?
Thanks, Pat

I'm afraid there are numerous threads on here discussing this problem. I posted in this one earlier that has a couple of suggestions, but the real solution will hopefully be provided in an update from Apple:
https://discussions.apple.com/message/17589686#17589686

I am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

i am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

I had a similar problem. Here is how I resolved the issue.
1. Remove Network Connect
2. Run Terminal and remove /usr/local/juniper and everything within the juniper directory.
3. Reboot the machine and reinstall Network Connect
4. Test if you can now connect.
During removal, you may encounter permission denied error, you will need to change the permission to 777. For example "sudo chmod 777 nc".

Having trouble with screen saver connecting to my photos?

Having trouble with screen saver connecting to my photos?

I will try that, but isn't Skype supposed to work without headphones? Why does it work with ichat when I talk to my friends with macs?
S

Im having trouble with setting up my imessage activation do I need credit

im having trouble with setting up my imessage activation do I need credit

Please don't post the same question multiple times.

Problems with planning function in sneak preview J2EE

Hi all,
I have a 2 systems environment with sneak preview J2EE and ABAP on my notebook. I configured SLD, JCo and in the 2004s with ta SPRO the planning function.
I can connect with ta RSPLAN to the J2EE server, but I get the error message:
com.sap.tc.webdynpro.services.exceptions.WDRuntimeException: no jcoMetadata found for RFC function 'RSPLSDOKU_LINK_GET'! Please verify, that your model is consistent with the ABAP backend: 'NSP'.
The testing of the JCo connections is positiv, i.e. there is a connection between the J2EE and the ABAP system already defined. Is tehre anything missing?
any help appreciated

I don't know if you ever resolved this, but you may just ned to change a setting on your query properties. When data is entered into planning layouts and saved, that data is put into a "yellow" request in the underlying infocube.
Until the necessary volume of data is posted which causes this to change to "green", it remains yellow. Note that this request could also be changed to green several ways. i.e. manually, by flipping the "real-time infocube behavior" switch, etc.
Anyway, as long as it "yellow" your query, by default will not consider it, unless you change it's properties to tell it to consider "yellow" requests. This can be done via RSRT and pressing the "properties" button. Choose request status "2" and your problem should be solved

Trouble with setting up my router...

I've set up plenty of routers in my life, i've built plenty of computers as well, my knowledge of computers and networking isn't that bad you can say. I was setting up my girlfriends router and was having trouble getting an internet connection. When the modem was hooked up to her computer it was fine, and a website could be accessed. When it is plugged in through the router, you can't access a website. The computer is detecting the connection (Local Area Connection 2 is plugged in) but the interent connection is not being detected. Any suggestions. To avoid this: all wires are assembled correctly! Thanks =)

I have the same problem here as described above...my router is the linksys wrt150N and my service provider is cox cable...my wireless adapter is intel WiFi link 4965AGN, while the regular connection is through realtek RTL8101E Family PCI-E Fast Ethernet NIC (NDIS 6.0).
thanks for any solution you can provide...
DC

Trouble with setting up Linux fileserver

I've done one month of research on the web for this and still no solution, so I have little hope someone in here could help me out.
I have a linux box with 1TB capacity running perfectly Kubuntu. There are two laptops that need access to this box. I have a samba server on the linux box, and everyone can connect to straight from the Finder without troubles.
The problem starts when I try to copy files or folders with a " / etc in. The two pseudo solutions I found so far were a filerenamer utility and using dmg files on the server with some kind of a clone app. I didn't try them out myself, because I really need to be able to use the linux box as an external shared harddrive. (push & pull files, and having a share ready for the upcoming TimeMachine space of the several laptops at our company)
As far as I'm informed it makes no sense to format the linux box drives to HFS (HFS+ is still not supported in the current linux kernel) using AFS instead of samba doesn't solve it either. The problem would be in the samba (or whatever other filetransfer protocol you like). Is that correct?
On the internet there are no real solutions to this problem, while this might seem a quite important thing to most Apple based companies that want to save money on the X-Serve stuff by setting up a linux server. If there is really no solution available at the moment, then I which to be informed on who might be responsible for solving this problem or who I'd have to address this issue to.
If anyone might have the same issues or maybe a solution, feel free to post it here.
Thank you very much in advance.

Several points.
First of all, a / is not a valid file name character in Mac OS X, or any Unix flavor that I'm aware of.
What you're talking about is a fundamental underpinning of the Unix filesystem. That is not going to change any time soon no matter what you do or who you petition.
That said, it shouldn't even be possible to have such a file on your system right now, so that begs a question right there.
The problem starts when I try to copy files or folders with a " / etc in.
While I don't think it's going to make any difference (see my point above), it would be useful to actually indicate what your problem is. Nowhere do you actually say what happens... does the file fail to copy? what about error messages? do the files corrupt when you copy them? does the client crash? or the server?
it makes no sense to format the linux box drives to HFS
There is definitely no reason to do this, under any circumstances.
If anyone might have the same issues or maybe a solution
Sure - stop trying to use / in filenames. If you have existing files (presumably from some pre-existing environment that didn't prevent their use, implement a renaming session to get rid of them (there are software tools that will do it for you). That is your only viable long-term solution.

Trouble with Application Server connection/deployment

This is the output I get when testing the remote connection I set up:
C:\Program Files\JDeveloper\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Program Files\JDeveloper\jdev\lib\oc4j_remote_deploy.jar http://costanza:1810/Oc4jDcmServletAPI/ ias_admin handmodel1 listApplications F:\ora9ias
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command listApplications F:\ora9ias UNDEFINED UNDEFINED UNDEFINED
Command = LISTAPPLICATIONS
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
HTTP response code = 200, HTTP response msg = OK
Command was successfully sent to Oc4jDcmServlet
Receiving session id from servlet to check command status
Session id = b3e9da25826746e393a2ab6e17c30b9b
Please, wait for command to finish...
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=b3e9da25826746e393a2ab6e17c30b9b
Checking command status
HTTP response code = 500, HTTP response msg = Internal Server Error
#### HTTP response is NOT ok
Waiting for 30 seconds and trying again...
Command has not finished yet
Checking command status...
Setting userName to ias_admin
Setting Cookie to JSESSIONID=b3e9da25826746e393a2ab6e17c30b9b
Checking command status
HTTP response code = 200, HTTP response msg = OK
Command has finished
Receiving command exit value
Receiving command output
Command output:
BC4J
Closing connection to Oc4jDcmServlet
DCM command completed successfully.
Output:
BC4J
Does this look normal? When I try to then use this connection for deployment of War file I get this output:
---- Deployment started. ---- Oct 30, 2002 11:27:05 AM
Wrote WAR file to C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.war
Wrote EAR file to C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear
Invoking DCM servlet client...
C:\Program Files\JDeveloper\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar C:\Program Files\JDeveloper\jdev\lib\oc4j_remote_deploy.jar http://costanza:1810/Oc4jDcmServletAPI/ ias_admin **** redeploy F:\ora9ias C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear webapp1 Oc4j_home
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command redeploy F:\ora9ias C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear webapp1 Oc4j_home
Command = INVALID_COMMAND
#### Invalid command: redeploy F:\ora9ias C:\Program Files\JDeveloper\jdev\mywork\Workspace1\Project1\deploy\webapp1.ear webapp1 Oc4j_home
Opening connection to Oc4jDcmServlet
Setting userName to ias_admin
Sending command to DCM servlet
#### Could not send command to Oc4jDcmServlet
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (-6)
#### HTTP return code was -6
Exit status of DCM servlet client: -6
Elapsed time for deployment: 5 seconds
#### Deployment incomplete. #### Oct 30, 2002 11:27:09 AM
Anybody know why this thing doesn't work.

Hi. I dont know obout CS on UNIX, on windows CS uses port 1090 and HTTP script ContentServer/ContentServer.dll
The web page is
http://server:1090/ContentServer/ContentServer.dll?serverInfo.
It's on Windows....
Also read this Note 586895. -->
      New access paths and compatibility with Windows systems
              The "/ContentServer/ContentServer. dll" and "/Cache/CSProxyCache.dll" paths have since been established as fixed default values for the Content Server/Cache Servers for Windows.
              The module access in the Apache Web server is not restricted to actual paths for program files. Using <location> tags, you can determine any (sub)paths that are to be used to access a module. These tags are entered in the "httpd.conf" file within the relevant module configurations. You can also define the clients allowed to access this "location" within a <location> tag with an Allow/Deny clause.
              To be able to continue using the Windows paths proposed in the SAP system, these Windows paths are installed as compatibility tags.
              In addition to this, you can use the new, essentially shorter paths "/sapcs" and /sapcsc" to access the SAP Content Server and the SAP Cache Server.
              The "Modifications to httpd. conf" attachment to the installation manual contains a list of all of the access paths delivered.
Regards.. Award if helpful.
Edited by: Sergo Beradze on Mar 11, 2008 4:37 PM

SPA 3102: Troubles with fax machine connected to SPA and dialing by IP PBX

Afternoon!
I have a fax machine connected to the SPA3102 and i have configured an extension from the IP PBX, that it's working as a fax, so the problem here is that sometimes when i'm sending a fax, this one fail, it shows an error, the other problem is that i'm not receiving any fax at all, the people get the tone, and actually send the fax, and here it shows "receiving" (it's the weird part) but after 40-50 seconds everything fail, it shows "error communication"
Hoping for help
Victor

Hello,
as far as I know, FAX and VoIP aren't the best friends - those technologies are not designed to work together smoothly ...
You may try following tuning :
Set your fax machine to 9600 (not 14400),
Make sure you only use G711a (Europe) or G711u (US) codec (fax will not work with others).
Activate T38 FAX support if your device FW offers such possibility.

HT2731 Having trouble with setting billing account

I'm having trouble setting my billing account with my debit card telling invild security code

Hi,
As I understand, you would like to add custom refiner to refinement panel in search.
From the screenshot, you intended to add vendor name property to search refiner. I cannot find the crawled property in my environment, is it an crawled property converted from custom site column?
Here is an good article for
adding refiner in SharePoint search 2013, and it seems there is not much difference from your process. However, here are the things you could check:
RefinableString00 is in TEXT type, please make sure it matches your vendor name column.
Please try mapping all crawled properties related to vendor name to RefinableString00 and test the issue again.
Please try make managed property searchable as well.
You could also try your process on other default managed property and see if it works.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Trouble with ADF portlet :) Connect Database

Hi every body!
Thank so much when you send time care to my trouble.
When I deploy a simple ADF portlet without Connecting Database ==> It run :))
After that, with Connecting Database and Create Bussiness Component from Table
==> It run but Result show in Portal: Could not get mark up ...
I using Jdevelop 11g
Thank again!

OK

Trouble with setting Static IP in order to port forward thru 2 routers

I currently have cable internet connected to one router (Linksys E2000 w/ firmware v1.0.03). That router is connected to another router, a Linksys E3200 w/ firmware v1.0.02. In order to properly forward ports through the E3200, I understand that I need to set up a static IP on that router.
I've basically followed the steps outlined in this video, but when I enter all the IP addresses for Static IP settings, it won't allow me to access the router's setup page. I try entering the new IP that I've given it (which it tries to direct itself to automatically after I save the settings) and the connection times out. I am able to access the internet otherwise, however. From here I'm forced to do a factory reset on the router and start from square one.
Anybody have any ideas? I'm getting pretty frustrated and would love to get the ports forwarded so I can get my server properly set up.
Solved!
Go to Solution.

I apologize, I should have been more specific. I have an ethernet cable connected from a standard port on the E2000 to a standard port on the E3200, which gives it internet access. On a hunch, last night I tried switching the cable to the Internet port on the E3200, but that gave no internet access.
The two routers are chained because I'm living in a friend's house and he has his own router (the E2000) set up with his own devices. Thus, I have 3 devices of my own connected to the E3200, including a Synology DiskStation NAS, which I would like to forward some ports to. I don't need two LAN subnets-- honestly whatever it takes to forward the ports through the two routers to my NAS would be enough for me.

Trouble with setting SLD connection of Preview J2EE + ABAP NW04s

Similar Messages

Maybe you are looking for