Trouble with share/burn for part of library

Trying to use the share/burn command. I select parts of the library I want to back up, but IPhoto thinks I want to burn the entire library and says there is insufficient space on the target DVD. I select the year by ticking the corresponding box which turns blue. I've done this before without difficulty.
Using iPhoto 6, OS10.6.8

Also how many photos are in the year's selection to be burned? The resulting library that is burned will be larger than just the size of the photos selected. It will include all edited versions, database files, and other files the library requires. It can get over the size allotted for the disk. For a DVD I try to limit the size of the selected photos to 4 GB or less.
Unless you plan to never upgrade to iPhoto 9 (11) or later I'd give some serious thought to what Terence has to say. To be able to move on up the chain at some time in the future to the latest version of iPhoto and Mac I'd get an external HD formatted OS X Extended (journaled) and copy the entire library to it. You can keep it updated with backup software that does incremental backups, i.e. copying only those new or modified file to the EHD. Three such apps are Synk, Synk Pro and ChronoSync.

Similar Messages

I have so much trouble with the plug in part of the program I want to disable this in Mozilla. I have to go to windows explorer to get around this plug in problem with Mozilla.

# Question
I have so much trouble with the plug in part of the program I want to disable this in Mozilla. I have to go to windows explorer to get around this plug in problem with Mozilla

Depending on the CSS, live view and design view can be totally different.
Its often best to type in your copy in the divs and then add the CSS to format it.
Post the css and the set of divs with some content in order to enable people to try work out what is wrong.

Anyone having trouble with iPad app for Comcast?

Anyone having trouble with iPad app for Comcast?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—again, the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

I'm having big trouble with my new mainboard: Part II

Hi
I haven't got any more replies to my post "I'm having big trouble with my new mainboard" by Krelian 2003.09.13 at 05:25. Please help! I've been struggling with this for a LONG time. And now my computer won't boot at all! Sometimes the LED's in front of the computer lights up for half a second, and nothing more happens. The only sign of life is the green light in the LAN jack. It happened after I took the ide cable for my harddrive in and out of the mainboard. This is insane, how can that suddeny happen :O ?! I was asked by wonkanoby to post max amps for my PSU, I did, and I really need to know if I maybe need a new PSU, since he asked that. Can a new PSU solve all the problems mentioned in my previous posts? Everything was fine except that I couldn't get into Windows, before i tried another harddrive on my computer. How can that complicate things so much? I have tried going barebone, and taking out the cmos battery and setting the jumpers JBAT1, J10 and J11. I have also tried every suggestion I got. Please help! I really need to get this fixed!
-Krelian

Some power supplies or designed so that if there is a short or overload they shut them selfs off and some will not turn back on. Some have a relay that will click back on and work, some you have to cycle the power switch. Those that won't come back on will have to be replaced. I'm not saying that yours is that type as I have no way of telling. But if you have a friend who will loan you a good power supply you might try it. As someone else said just turning off the power will not darn all the power from some motherboards. To test this turn off your power supply than turn on the computer with the start botton. Mine will flash the lights and fans will start to spin than die. So every time you turn off computer to work on it. After turning off PSU hit the start botton to drian any power left in it before working on it. Also do this after unplugging it just to make sure.

Can't create a new account at ePrintCenter - trouble with the server for 2 weeks.

Hi. I'm trying to create an account at ePrintCenter and all the time getting mesage 'Возникла проблема с сервером. Проблема будет устранена в ближайшее время. Приносим извинения за неудобства.' (A trouble with the server, wait, bla bla bla). When will it be fixed?

For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may help resolve your problems.
1.) Completely shut down your printer and restart it
2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from completing.
a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to reattach to the cloud.
b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
I am an HP employee

Trouble with database connector for FAST for Sharepoint

I have plenty of experience with the JDBC connector for FAST ESP using Oracle, but this is the first experience I have with the same connector for FAST for Sharepoint (F4SP). I've created the XML config exactly to specs based on the technet guides
and configured my user accounts on the SQL Server appropriately. I'm using SQL Server 2008 R2.
If I try to use a Windows account, no level of access granted on the SQL Server results in a successful login. Any attempt to use the connector is met with "Login failed for user: domain\username". If I try a SQL Server account, I no longer
see a login failure, but this instead:
PS C:\FASTSearch\bin> jdbcconnector start -f ..\etc\DTtest.xml
Copyright (c) Microsoft Corporation. All rights reserved.
14:44:59,870 INFO [JDBCConnector] Starting the connector!
14:44:59,870 INFO [JDBCConnector] Validating config.......
14:45:00,136 INFO [JDBCConnector] Testing connections to external systems
14:45:00,198 INFO [JDBCConnector] Checking if connections to source and target work....
14:45:00,620 INFO [JDBCAdapter] Opened JDBC Connection
14:45:00,620 INFO [JDBCConnector] Connection made to source system
14:45:00,620 INFO [CCTKDocumentFeeder] Publisher :Initializing: com.fastsearch.esp.cctk.publishers.CCTKDocumentFeeder
14:45:00,620 ERROR [JDBCConnector] Failed creating publisher. Test connection failed.
14:45:00,620 ERROR [JDBCConnector] Caused by: Unable to create status tracker.
14:45:00,620 ERROR [JDBCConnector] Caused by: Could not connect to database. Make sure TCP/IP is enabled for SQLServer.
14:45:00,620 ERROR [JDBCConnector] Caused by: No suitable driver found for ;integratedSecurity=true
14:45:00,620 INFO [JDBCConnector] Connection made to target system
TCP/IP is certainly enabled for SQL Server -- I am connecting to it with Sharepoint 2010, not to mention a test install of Toad Freeware for SQL Server from another machine, resulting in no errors. My connection string, username and password are all
set up according to the technet guide, including the encrypted password set by the encryption utility run the in F4SP Powershell. The same user who runs the connector also ran the encryption tool, so that should not be a problem either.
I've never had this kind of trouble connecting to Oracle databases with the JDBC connector for FAST ESP. Any suggestions? These failures aren't exactly helpful to me. Thanks in advance.

I found the solution to this problem in case anyone else was still curious.
This was caused not by JDBC settings, permissions/access on SQL Server, etc. It was caused simply by a missing SQL Server in F4SP configuration. When you run the F4SP config wizard, either as single-node or multi-node installations, the wizard
might end up ignoring the value you select for SQL Server, even if you are using a deployment XML file. When configuring as a multi-node setup, the wizard ignored both my deployment XML tag <connector-databaseconnectionstring> and the SQL Server
setting done manually in the wizard itself. Examing the evidence, I suspect this was caused by corrupt installation media (since the installer also failed to create some core files in /etc upon doing a reinstall).
The bottom line is that you must see a value for SQL Server in your install_info.txt file in order for the JDBC connector to work with SQL Server, like this:
Other services
Log Server:             myserver.mydomain.com:13415
SQL Server database:    jdbc:sqlserver://myserver.mydomain.com;DatabaseName=FASTSearchAdminDatabase;integratedSecurity=true
If you see this instead, the connector will never work:
So, the JDBC connector is certainly dependent on the main configuration of F4SP, regardless of what SQL Server is targeted in your connector's XML configuration.
Other services
Log Server:             myserver.mydomain.com:13415
SQL Server database:
;integratedSecurity=true
I had no idea there was a connection between my install_info setup and the use of the JDBC connector. But, the connection makes sense considering this was the error message from the JDBC connector:
09:20:04,016 ERROR [JDBCConnector] Caused by: No suitable driver found for ;integratedSecurity=true

Sorry still in trouble with corrupt drivers for Win 7 ....

Hi i have an early 2011 Mac Book Pro. I installed Win 7 (using boot camp) and Win 7 just about works OK, but of course it is missing the correct drivers, which i thought were available from the Mac OS X disc, obviously not from the Mac Application drivers disc.
So then i asked the question on the Forum, where it was suggested because i have a fairly recent Mac Book Pro i should download and burn to Disc the correct drivers by running Boot Camp. When this is done simply run the SETEUP.EXE file in Windows 7 and it will all be sorted !.
Sadly it doesn't and isn't, i run the SETUP.EXE file and i am presented with two options ....
1. Remote Install Mac OS X
2. DVD or CD Sharing
i do believe according to the instructions i have read elsewhere there should be 3 options, the first option should be ... Install MAC drivers for Windows 7 !!!!
So please can someone help me out here ?.
Tim

It shouldn't require pounding the answer over and over. it shouldn't even require using OS X DVDs. Or typing the same answer on the keyboard multiple threads and times. It SHOULD either just be an independent download, or "FIX" whatever that 10.6.6+ 'featue" in Boot Camp Assistant. An additional chapter in the Boot Camp for Windows install PDF Guide.
the troubles are not with Windows my dear Dr Watson at all, no sir. They are in the guide, self-inflicted, left out of the guide, lack of reading the guide, and there are 100s of articles that belong under and in the Apple Support product page for Boot Camp (and weed out the stuff that is old, and have a link to sub-category if needed, and a "NEW Support Articles" addition. Which of course only .001% check to see.
Like this tidbit from a week ago:
Resolving issues with Windows when using Apple Magic Mouse or Apple Wireless Keyboard
Belong listed -
Apple Support Boot Camp
And having all "knowledge" base articles on everything made that harder to wade through than before it ballooned to take in all the devices and products (not just "mac"). Which you or I would almost have to check a couple times a week.
Apple KB articles

Trouble with display settings for projector/Reactable

Hi,
I'm trying to install a musical hardware interface called the Reactable for use with my iMac, and I'm having trouble getting the correct display settings. It's designed to work with laptops and it works fine for the most part with my Apple Hackintosh, but I can't seem to get it working correctly with my iMac. The tech support from the Reactable company recommends that I use 1600x1200 resolution or 1024x768 (native) on the projector, but when I open my display settings I am not presented with either of those options. It only permits me to use 1024x768 and 1024x768 (stretched).
The only instance in which I can get the projection to cover the whole table is with 1024x768, but then the projection is too large. Do I need to change the scaling somehow? How do I do that?
Thanks,
Justin

1080p. If you have a Mac Mini with an HDMI connector, connect direct through there.
Otherwise you'll need to look at either: Which Macs don't have audio over mini-Displayport connectivity, need either an
Apogee DVI To HDMI Converter / SPDIF Optical Toslink+Coaxial Input Output if you have a mini-DVI or DVI (The left connector is DVI, and the right connector is mini-DVI) connector and it is Intel.
Kanex iAdapt Displayport adaptor if you have a mini-Displayport ( http://upload.wikimedia.org/wikipedia/commons/thumb/4/47/Mini_DisplayPort_on_App le_MacBook.jpg/300px-Mini_DisplayPort_on_Apple_MacBook.jpg
) connector.
Note, thunderbolt connectors look the same as mini-Displayport except they have the lightning icon symbol.
PowerPC Mac Minis, need a StarTech DVI2HDMIA connector together with an RCA minijack to red and white splitter cable.

Trouble with custom kernel for EeePC 1000H and bluetooth

I believe I've got pretty much everything working on my 1000H except for bluetooth. I can't seem to get the hardware working. The module is loaded, and dmesg has references to bluetooth, but blueman does not list the adapter, and running "hcitool scan" from the command line returns "Device is not available: No such device".
I've enabled every bluetooth-related item I can find in the kernel, so I don't see what I'm missing. I did import the config from the stock kernel, where bluetooth was working fine.
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="America/Los_Angeles"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="no"
#MOD_BLACKLIST=() #deprecated
MODULES=(atl1e rt2860sta rndis_host cdc_ether usbnet rfkill acpi-cpufreq pciehp intel_agp snd-hda-intel !snd-pcsp bluetooth !eeepc_laptop)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="sprice-l"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="dhcp"
eth0="dhcp"
wlan0="dhcp"
INTERFACES=(!eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng !network @acpid @crond hal networkmanager netfs bluetooth @alsa @openntpd gdm)
dmesg:
Linux version 2.6.32-ARCH (root@sprice-l) (gcc version 4.4.2 20091208 (prerelease) (GCC) ) #5 SMP PREEMPT Tue Dec 29 09:02:31 PST 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f7a0000 (usable)
BIOS-e820: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
BIOS-e820: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS)
BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3f7a0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 0C0000000 write-back
1 base 03F800000 mask 0FF800000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e2000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003f7a0000 (usable)
modified: 000000003f7a0000 - 000000003f7ae000 (ACPI data)
modified: 000000003f7ae000 - 000000003f7f0000 (ACPI NVS)
modified: 000000003f7f0000 - 000000003f800000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000fff80000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01c00000
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 3f735000 - 3f78fc32
Allocated new RAMDISK: 00011000 - 0006bc32
Move RAMDISK from 000000003f735000 - 000000003f78fc31 to 00011000 - 0006bc31
ACPI: RSDP 000fb9f0 00014 (v00 ACPIAM)
ACPI: RSDT 3f7a0000 0003C (v01 A_M_I_ OEMRSDT 08000801 MSFT 00000097)
ACPI: FACP 3f7a0200 00084 (v02 A_M_I_ OEMFACP 08000801 MSFT 00000097)
ACPI: DSDT 3f7a05b0 05050 (v01 A1028 A1028000 00000000 INTL 20051117)
ACPI: FACS 3f7ae000 00040
ACPI: APIC 3f7a0390 0005C (v01 A_M_I_ OEMAPIC 08000801 MSFT 00000097)
ACPI: MCFG 3f7a03f0 0003C (v01 A_M_I_ OEMMCFG 08000801 MSFT 00000097)
ACPI: OEMB 3f7ae040 00061 (v01 A_M_I_ AMI_OEM 08000801 MSFT 00000097)
ACPI: HPET 3f7a5600 00038 (v01 A_M_I_ OEMHPET 08000801 MSFT 00000097)
ACPI: SSDT 3f7aeb80 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
127MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 0006c000 - 00072f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 000167a084] TEXT DATA BSS ==> [0001000000 - 000167a084]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [000167b000 - 00016821fc] BRK ==> [000167b000 - 00016821fc]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000011000 - 000006bc32] NEW RAMDISK ==> [0000011000 - 000006bc32]
#8 [000006c000 - 0000073000] BOOTMAP ==> [000006c000 - 0000073000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003f7a0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003f7a0
On node 0 totalpages: 259887
free_area_init_node: node 0, pgdat c1548600, node_mem_map c1684200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 256 pages used for memmap
HighMem zone: 32418 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @c2000000 s29720 r0 d23528 u2097152
pcpu-alloc: s29720 r0 d23528 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257855
Kernel command line: root=/dev/disk/by-uuid/21e88bd5-5449-4926-8ed4-80fce8263ceb ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0003f7a0)
Memory: 1023012k/1040000k available (4034k kernel code, 16100k reserved, 1396k data, 408k init, 130696k highmem)
virtual kernel memory layout:
fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc154e000 - 0xc15b4000 ( 408 kB)
.data : 0xc13f08c2 - 0xc154daf8 (1396 kB)
.text : 0xc1000000 - 0xc13f08c2 (4034 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Fast TSC calibration using PIT
Detected 1596.133 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.27 BogoMIPS (lpj=5320443)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Atom events, Intel PMU driver.
... version: 3
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090903
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3193.98 BogoMIPS (lpj=5319968)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM2)
CPU1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6386.25 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-1 level MC
groups: 0-1 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-1 level MC
groups: 0-1 (cpu_power = 1178)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff]
pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07]
pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f]
pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003)
pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.2: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfbef0000-0xfbefffff]
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xfbefffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
system 00:08: ioport range 0x25c-0x25f has been reserved
system 00:08: ioport range 0x380-0x383 has been reserved
system 00:08: ioport range 0x400-0x41f has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x480-0x4bf has been reserved
system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: 0x1000-0x1fff
pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0xe000-0xefff
pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
pci 0000:00:1c.1: PREFETCH window: 0x00000040400000-0x000000405fffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.3: IO window: 0x2000-0x2fff
pci 0000:00:1c.3: MEM window: 0xf8000000-0xfbefffff
pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: enabling device (0106 -> 0107)
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
pci_bus 0000:04: resource 1 mem: [0x40000000-0x401fffff]
pci_bus 0000:04: resource 2 pref mem [0x40200000-0x403fffff]
pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff]
pci_bus 0000:01: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf6ffffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 363k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1262112860.302:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Slow work thread pool: Starting up
Slow work thread pool: Ready
NTFS driver 2.1.29 [Flags: R/W DEBUG].
fuse init (API version 7.13)
SGI XFS with security attributes, large block/inode numbers, no debug enabled
msgmni has been set to 1744
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
ACPI: AC Adapter [AC0] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: SSDT 3f7ae180 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 3f7ae450 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
processor LNXCPU:00: registered as cooling_device0
ACPI: SSDT 3f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 3f7ae3c0 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
Switching to clocksource hpet
processor LNXCPU:01: registered as cooling_device1
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (53 C)
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
brd: module loaded
loop: module loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: using broken periodic workaround
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 408k freed
BFS CPU scheduler v0.313 by Con Kolivas.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
usb 1-5: new high speed USB device using ehci_hcd and address 2
usb 1-5: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi1 : ata_piix
scsi2 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
usb 1-8: new high speed USB device using ehci_hcd and address 4
ata1.00: ATA-7: ST980811AS, 3.ALC, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
elantech.c: assuming hardware version 2, firmware version 2.48
ata1.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST980811AS 3.AL PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
usb 1-8: configuration #1 chosen from 1 choice
sd 1:0:0:0: [sda] Attached SCSI disk
elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64.
usb 5-1: new full speed USB device using uhci_hcd and address 2
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
usb 5-1: configuration #1 chosen from 1 choice
Driver 'rtc_cmos' needs updating - please use bus_type methods
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
udev: starting version 146
ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ATL1E 0000:03:00.0: setting latency timer to 64
rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
rt2860 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
=== pAd = f825a000, size = 580808 ===
<-- RTMPAllocAdapterBlock, Status=0
rt2860 0000:01:00.0: setting latency timer to 64
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver rndis_host
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
scsi 0:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0
sd 0:0:0:0: [sdb] 1984000 512-byte logical blocks: (1.01 GB/968 MiB)
sd 0:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sdb] Assuming drive cache: write through
usb-storage: device scan complete
sd 0:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 0:0:0:0: [sdb] Assuming drive cache: write through
sd 0:0:0:0: [sdb] Attached SCSI removable disk
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 1951888k swap on /dev/sda1. Priority:-1 extents:1 across:1951888k SS
Bluetooth: L2CAP ver 2.14
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
eeepc_laptop: Eee PC Hotkey Driver
eeepc_laptop: Hotkey init flags 0x41
eeepc_laptop: TYPE (2000000) not reported by BIOS, enabling anyway
eeepc_laptop: PANELPOWER (4000000) not reported by BIOS, enabling anyway
eeepc_laptop: Get control methods supported: 0x6101713
input: Asus EeePC extra buttons as /devices/platform/eeepc/input/input7
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
ATL1E 0000:03:00.0: irq 27 for MSI/MSI-X
RX DESC f6a56000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
RTMPSetPhyMode: channel is out of range, use first channel=1
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 24(24) BSS returned, data->length = 2895
CPU0 attaching NULL sched-domain.
CPU1 attaching NULL sched-domain.
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
domain 1: span 0-1 level MC
groups: 0-1 (cpu_power = 1178)
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
domain 1: span 0-1 level MC
groups: 0-1 (cpu_power = 1178)
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
===>rt_ioctl_giwscan. 27(27) BSS returned, data->length = 3340
===>rt_ioctl_giwscan. 24(24) BSS returned, data->length = 3033
==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
===>rt_ioctl_giwscan. 33(33) BSS returned, data->length = 4186
===>rt_ioctl_giwscan. 31(31) BSS returned, data->length = 3779
===>rt_ioctl_giwscan. 27(27) BSS returned, data->length = 3232
===>rt_ioctl_giwscan. 26(26) BSS returned, data->length = 3185
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
ERROR!!! RTMPCancelTimer failed, Timer hasn't been initialize!
===>rt_ioctl_giwscan. 29(29) BSS returned, data->length = 3623
===>rt_ioctl_giwscan. 24(24) BSS returned, data->length = 2955
===>rt_ioctl_giwscan. 21(21) BSS returned, data->length = 2593
===>rt_ioctl_giwscan. 28(28) BSS returned, data->length = 3512
===>rt_ioctl_giwscan. 31(31) BSS returned, data->length = 3816
===>rt_ioctl_giwscan. 32(32) BSS returned, data->length = 3932
exe[2947]: segfault at 5f ip 085642ae sp b6575a50 error 4 in chrome[8048000+20dc000]
exe[2958]: segfault at 1692e8c6 ip b6c174cb sp b64b5a48 error 6 in libstdc++.so.6.0.13[b6bc1000+e8000]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
===>rt_ioctl_giwscan. 29(29) BSS returned, data->length = 3614
wlan0: no IPv6 routers present
===>rt_ioctl_giwscan. 30(30) BSS returned, data->length = 3706
===>rt_ioctl_giwscan. 22(22) BSS returned, data->length = 2758
===>rt_ioctl_giwscan. 33(33) BSS returned, data->length = 4063
===>rt_ioctl_giwscan. 29(29) BSS returned, data->length = 3631
===>rt_ioctl_giwscan. 30(30) BSS returned, data->length = 3633
NOTE: I load eeepc-laptop via rc.local to save time. I don't have any other hardware issues that I can think of.

Got it. I tried booting with MOD_AUTOLOAD set to yes, and it was working fine. Looks like I needed to specify some more modules in my list.

Deleting Virtual Copies From Library, Burning Collections & Part of Library

Hello! I am new to this software; I have LR 2.0
From the library, I selected/highlighted the photos that I wanted to put into a new collection, then clicked the plus symbol above "Collections." I was then asked if, when putting the selected photos into that collection, I wanted to make a virtual copy in the library. I wasn't exactly sure what this meant, so I checked the box. Now, obviously, I have duplicates of all of my selected photos in my library. My collections folder turned out just how I wanted. However, I would prefer not to have a cluttered library. Is there a way to delete the virtual copies without removing them from my collection?
Also, I plan on burning a disc for a client. I want to include the entire photoshoot (what's in the library) but I would also like to have a sub-folder on the CDROM of my selected favorites/best (which remain in the collection.) How can I do this? Do I export the collection folder separately?
Thank you!

Hello! I am new to this software; I have LR 2.0
From the library, I selected/highlighted the photos that I wanted to put into a new collection, then clicked the plus symbol above "Collections." I was then asked if, when putting the selected photos into that collection, I wanted to make a virtual copy in the library. I wasn't exactly sure what this meant, so I checked the box. Now, obviously, I have duplicates of all of my selected photos in my library. My collections folder turned out just how I wanted. However, I would prefer not to have a cluttered library. Is there a way to delete the virtual copies without removing them from my collection?
Also, I plan on burning a disc for a client. I want to include the entire photoshoot (what's in the library) but I would also like to have a sub-folder on the CDROM of my selected favorites/best (which remain in the collection.) How can I do this? Do I export the collection folder separately?
Thank you!

Trouble with creating subdomains for .local address

I'm a web developer on Mac OS X 10.5.6 and I use my MacBook Pro as my primary development and testing machine. I have Apache 2 running and Entropy PHP 5.2.4. All of that works fine. In the past, I didn't use virtual hosts. Instead, I would divide my projects into subfolders of /Library/WebServer/Documents
One day, I wised up and created virtual hosts by adding the appropriate entries to /etc/apache2/extra/httpd-vhosts.conf and by adding a few corresponding hostnames to /etc/hosts.
In the hosts files, I "created" subdomains for each site. For example: If I was working on a site for Dairy Queen, I might add the following line to /etc/hosts:
127.0.0.1 dq.local
Then I would add the virtual host to /etc/apache2/extra/http-vhosts.conf and it would look something like the following:
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot "/Library/WebServer/DairyQueen/Documents"
ServerName dq.local
<Directory "/Library/WebServer/DairyQueen/Documents">
Options FollowSymLinks MultiViews
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
I've been setup in the above way for many months and it all works great. On my computer, I can enter dq.local in my browser and it pops right up.
I've even modified the hosts file in my Parallels Virtual machines running Windows. And from any browser in any of my Virtual machines, I can reach my various .local domains hosted by Mac OS X.
*The Problem:* If I want to browse the site from another computer on my local network (or my iPhone), they will not find my MacBook Pro in the .local domain without editing the /etc/hosts files on those devices -- which is a nightmare scenario because A) I can easily edit the /etc/hosts file on the iPhone, B) It's inconvenient to have to edit /etc/hosts files on the myriad of devices, and C) I would have to have my laptop set to a static IP -- something I could easily accomplish, but it's just not as clean of a solution as I'm looking for.
I realized that when using Bonjour, my MacBook Pro shows up to other computers as "Christophers-MacBook-Pro.local". I thought, hmmm ... maybe I could utilize that by dividing it into subdomains. For example, I would modify the vhosts file setting the new domain name to dq.christophers-macbook-pro.local, I would modify my own /etc/hosts file to say:
127.0.0.1 dc.christophers-macbook-pro.local
... and Voila! I'd be done, right? Nope!
Of course on the MacBook Pro that's hosting the sites, I can browse to dq.christophers-macbook-pro.local, and it works fine just like it did when it was dq.local.
On a PowerBook G4 (running a freshly installed and clean 10.5.6), going to dq.christophers-macbook-pro.local results in the wrong site from coming up. What!?
Note that when I go to just "christophers-macbook-pro.local" on the iPhone and the PowerBook, the correct site comes up -- from the MacBook Pro.
Turns out, my xServe running Leopard Server is responding to the request and serving up my photo gallery site on both the PowerBook and the iPhone!
I do have DNS running on the server. The other computers are connected wirelessly and via DHCP from an Airport Extreme Base Station that IS NOT getting DNS from the server, rather it's getting DNS from Comcast. The notbooks and the iPhone are getting DNS from the Base Station.
When I stop the DNS service on my xServe, there's no effect -- the web response is still coming from the server. (Yes, I flushed the DNS cache on the PowerBook just to be sure). I checked the virtual hosts on the server and none of them is configured with a wildcard as an alias. The photo site IS the first entry in the sites list -- the first virtual host.
So, how do I break my MacBook Pro's .local domain into subdomains? What am I missing?

HI,
That's about 6 miles over my head but I can suggest that you post in the Apple Mac OS Technologies forum:
http://discussions.apple.com/category.jspa?categoryID=162
Carolyn

Trouble with shares and access to sub folders

We're attempting to replicate our Netware configuration to a new MacOS 10.4.6 server. On Netware we where able to create a share that was available to all users, however the folders they saw within the share where governed by their access rights within the tree. For example, take the following structure:
Data --+-- Folder1
|
+-- Folder2
Rights for Folder1 where assigned to Group1 and rights to Folder2 to Group2. All users in Group1 and Group2 could then mount the drive and see the folders that they where a member of.
We have attempted to replicate this on MacOS as follows:
Data --+-- Folder1 (ACL Group1 = Read/Write)
|
+-- Folder2 (ACL Group2 = Read/Write)
However, when you mount Data on Mac or Windows it says you have no access rights and won't let you dig down to Folder1 or Folder2. Is there something I'm missing?

If all users in Group 1 and Group2 have access to
the root Data folder then that permission will
propogate down the tree and they will have read
access to each of the sub folders. If folders within
suddenly gain everyone RW access then they will be
able to open and see the folder.
Thanks, I've solved the problem. I needed all users to have access to the root of the 'volume' but for that not to propogate down the tree. I've found the inheritence settings and that I think has solved the problems.
You can control this by propagating permissions
downward from the top level folder. Do this:
Create a group for everyone who accesses Data called
DataGroup.
Add DataGroup to the group list for everyone. (You
can mass select Users and add the group to everyone
who needs it at once.)
Change the Unix group owner of the Data folder to
DataGroup and set these permissions:
Owner: admin RW, Group: DataGroup R, Everyone: None
Open Data and set Folder1 privileges to:
Owner: admin RW, Group: Group1 RW, Everyone: None
and propagate these settings to the subfolders. Be
sure to propagate Group Ownership and Group
Permissions and Everyone permissions.
NOTE: This is the traditional *nix way - with ACLs
you can do this and then fine-grain the control using
the ACL granting Group 1 Full Control and propagating
that.
Now set Folder2 to Group2 etc.
This allows you access to Data (versus using staff or
some generic Unix group but those will work too) but
allows you to control who has access to the
subfolders. In this case membership in DataGroup only
grants you access to see the folders - it doesn't
even guarantee access to any of the subfolders.
If you want nested folders within Folder1 or Folder2
you can do the same thing - create a folder owned by
a specific user and set Group Read access to none and
propagate that through the subtree. Just be aware
that propagations that happen above that folder can
reverse the settings. Always set large and then get
specific. New Users are granted access to Data by
adding DataGroup and users access to folders are
granted or revoked by adding or removing the Group1,
Group2 etc settings.
I think that once you get it set how you want and try
it you'll find that the Data folder is redundant and
is giving you unnecessary conceptual problems. If you
make the Folder1, Folder2 etc shares then after a
user authenticates they will see only the folders
they have permission to access. If I am in Group1 and
I authenticate my selection of folders will only be
folders accessible by Group1 - I will never even see
Folder2. By grouping them in Data you are adding a
layer of permissions that is probably not needed. But
everyone has their own organizational system and
sometimes it's easier to leave users with what their
used to using. (I have users that still mount Users
and navigate to their own folder even though their
user folder shows up at the login level simply
because that's the way they've always done it.)
No there are good reasons to share the Data folder and not the children below. For example, if you are on Windows clients and you wish to map the share to a drive letter you will have no way of doing this if you don't have the containing folder.
Yes, I understand with ACLs (or at least I think I
do and have setup a system that works). The problem
is that new folders get Everyone Read access. Which
ruins the effective permissions for that folder. I
need a way of making the default posix permissions
O=RW,G=None,Everyone=None.
We have a lot of folders to deal with Folder 1 and
Folder 2 are only examples. We have about 15 or more
folders with sub folders that have differing access
rights. All this we have sorted out except the
default POSIX permissions for new folders/files.
You can change Umask default privilege settings but
DON'T. Well, DON'T unless you're a *nix guru. It
changes the default for all created files - including
those created by the system and this can lead to
serious problems down the road.
I don't want a whole system default change to umask I want one that works only for people connected via AFP, you would think that would be possible. Similarly I want one for SMB access also.
If you get this working you will see that despite the
POSIX settings the ACLs are working. If you really
need your Unix permissions to be set a certain way
chuck ACLs and set "Inherit from Parent Folder" in
AFP and SAMBA. With ACLs on the system will only do
POSIX settings.
In the windows world you either use POSIX or ACLs in the mac world you use a combination of both. That can be an asset but it can also be a major problem. If only you could use the inherit setting for POSIX when ACLs where enabled it would solve all these worries.
Thanks for your time on this.
Ian

Trouble with "Share This" snippet

I am having strange problems with my HTML snippets for "Share This". I am working in iWeb 09, and have just created this (my first iWeb) site. Also, I am publishing to FTP - not Mobileme.
It works fine on several of my pages, but on others it moves over text and/or does not work at all after publishing.
I have added the "twit this" snippet to every page and it works perfectly. I don't understand why some are working and other are not.
Any suggestions?

I have BTMM enabled on all machines that I wish to be able to connect to and i have the enabled the same user on each machine, i.e. I am logged in to Machine 1 with user = 'user1' with password = 'user1pw'.
I also have enable 'user1' on Machine 2.

Trouble with signing up for new service.

Hello, I have a problem that I hope you can help with. Tuesday I went online to see if I qualified for your service with no deposit(I did). Unfortunately, I never saw a confirmation notice of approval and I went a few steps too far and actually purchased the phones from you. This wasn't what I intended and I called to cancel. That went ok, but the items had already shipped. I was informed by customer service to just refuse the items and Fedex will send the phone package back.
Wednesday, I never got the shipment and called Fedex to find out why. Apparently you had requested it get returned and that is what they are doing. As of last night it was en route back to you.
Thinking everything with that was taken care of, I decided to still sign up for Verizon Wireless, but wanted to go through Best Buy for the Gold and Blue Galaxy s5's. When I get there I am informed that I already have an account, yet there is no phone number associated with it. So the Best Buy rep has no idea how to proceed, as they cannot set up new service since it appears I already have an account. Nor could they do a work around and upgrade as I had no number.
While I was at the store I tried calling customer service and they were very rude and said they had to have the phones that I ordered back on their way to them. I said they were and told them that I could look on the fedex site and see that they were en route. But the customer service rep was unwilling to help any further.
I was wanting to move over to Verizon as I've heard the service and support was much better than ATT. But I am pretty tired of this mess. I am reaching out to you via facebook and this forum to see what my options are. I was wanting to get these phones by this weekend as the specials that Best Buy were offering may go away.
Please let me know what can be done.

nightinffale78-
Help has arrived! First I do want to apologize for the experience you had to go through while talking to one of our reps over the phone. That is not the way we do business and reassure you we are not trained that way. I want to make sure you are able to sign up for service and become part of the Verizon Wireless family. To add the new lines of service we would have to talk to our Telesales department at 800-256-4646 have you has the opportunity to give them a call? Please send me a Private Message to see other options we might have to get these phones out. I just followed you, please accept and follow back to send me a Private Message.
JorgeO_VZW
Follow us on Twitter @VZWSupport

I am having trouble with sleep mode for my macbook pro

My Macbook pro 13" is getting old, about late 2009.
Sorry if language confusing you.
Ok, Normally when you are turn your screen down osx will automatically get into sleep mode and when you open the screen it will be back as usual.
Lately since 2-3 months ago til now I am having problem with that, when I am turn my screen down everything is fine I mean no horrible noise or anything that warn you like this mac is having problem and turn to sleep mode as usual BUT when I am turn it back on my monitor screen is blank, black screen for awhile I mean not less than 5 minutes also no respond to anything then my mac will auto restart and show up the dialog "This mac has restarted because unexpected problem blah blah blah" something like that. Sometimes I can't wait that long so I hold down the turn off button then turn my mac on again.
Not everytime this problem show up just it seems this problem start show up more frequently.

Ok I got the answer from google, just resetting PRAM or something and now everything is fine.

Trouble with share/burn for part of library

Similar Messages

Maybe you are looking for