Trouble with Slurs when Changing the Staff Style

Hello,
I'm exploring the LP8 score editor and find that it is VERY impressive!
My goal is to use Logic for everything, instead of having to dole out the score duties to Sibelius or Finale. After reading the manual, I've found that LP8 is designed for just that! With the display quantization settings and the other "tips" that it offered, the manual showed me that LP8's score editor is formidable indeed!
One issue (and maybe I missed this in the manual) that I'm having is changing the staff style for my parts. The manual says that this is an ideal way to print parts because you can change the key, transposition, etc. Writing for full orchestra, this seems (forgive the unintended pun) "Logical."
This issue I'm having is that my slurs do not move with my notes when I change the staff style. For example: let's say I have a theme in a MIDI region that is using the "treble" staff style. I have dynamics and slurs everywhere. Then I want to give this to an Alto Sax so I select the MIDI region and change the staff style to "Alto Sax." While the key signature and the notes change in a very "correct" looking way. The slurs I put in remain in their original locations. This is a bit discouraging because it means a lot of work to fix them before I can print the part out.
I've tried "selecting equal" events in the edit drop down menu. This almost works, but it does not discriminate between slurs up and slurs down.
If someone could please let me know what they do with slurs in general, and especially what they do when creating parts with them that would be great.
Thanks in advance!

Composer_25 wrote:
My goal is to use Logic for everything, instead of having to dole out the score duties to Sibelius or Finale. After reading the manual, I've found that LP8 is designed for just that! With the display quantization settings and the other "tips" that it offered, the manual showed me that LP8's score editor is formidable indeed!
I'm a HUGE advocate of Logic's score editor, but depending on the type of music you're writing you'll find that there are certain things that it just can't do. To this effect, there may be times when it will just be easier to send your music to a Finale/Sibelius copyist to put the finishing touches on your score/parts, i.e., those things that you must have in your score but which Logic can't do, such as wavy-line glissando markings for harp parts, tram marks (for separating systems on a conductor's score), alternative pedal markings for piano, etc. (up/down marks), and others.
Should you ever get to that point, check out a program called PDFtoMusicPro. It will take a PDF file from Logic and translate it into an XML file that can be read by Finale, etc., including slurs, key signatures, dynamic markings, etc. It's pretty fantastic!
This issue I'm having is that my slurs do not move with my notes when I change the staff style... \[snip]
Yup, it's a problem. The best approach is to use the transposing staff styles and do your markup on them. Of course, if you're preparing a C score then none of that matters.

Similar Messages

I'm having trouble with email I changed the pass word but still can't receive mail it states it's not correct

I Changed my pass word which I received conformation that it was changed but still can't get to my mail, it says that IMAP is not correct?

Hello Joe,
If you are having issues with getting mail on your iPhone, then go over the troubleshooting in the article below. If all the settings and passwords look good, then I would recommend removing the account and setting it back up.
Get help with Mail on iPhone, iPad, and iPod touch
http://support.apple.com/en-us/ts3899
Regards,
-Norm G.

Im having trouble with my volume. The only time i can hear my iphone's sound, is when i have heaphones plugged in. How do i fix this

Im having trouble with my volume. The only time i can hear my iphone's sound, is when i have heaphones plugged in. How do i fix this

Hello Malique2k14,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
No sound or distorted sound from speaker
Receiver issues
Best of luck,
Mario

How can I programatically change the Plot Style of a 3D surface?

I believe this can be done using a property node...however I am unable to find the property. At one point in my program, the plot style automatically switches to Points, and I want it to be Surface again later. I have a 3D surface reference wired to a property node, giving me the CWGraph3D properties. If the properties followed the menu style you get from right clicking on the 3d surface, I should be able to then select the property plots, and change the plot style. However, even though I can get a reference to the plot, the only property I can access is the count. I would appreciate it if someone could show me where I am going wrong, since Im confident this can be changed programatically.
Thank you!
Jeff
Using Labview 7 Express

Hi Jeff,
here's what I did (found somewhere in the examples that come with LabView):
Message Edited by GerdW on 03-14-2007 04:28 PM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
3dplot.png ‏9 KB

Change the button style in wdj

Dear all:
I want to change the button style in wdj application
When I change the “url to button design bar”to gif file,preview is fine
But emphasized buttons is old in wdj application
My EP versions is 7.4
Thanks in advance!!!
Regards
Blues

Hi Venki,
Thanks a lot for the reply.
If the OTR is static I can go and change text in the Transaction SOTR_EDIT. But in this scenario the button text changes dynamically according to the tab navigation on the Candidate profile page.
Say If I am in Education Tab, the first button will be the Work Expereince (previous tab name ) and Second button text will be Qualifcation (next tab name). Similary the button text changes when I am in Qualification tab.
I tried looking in the HRRCF_PROFILE for the OTR related to these buttons I could not find any.
Any suggestions to solve this will be higly appreciated.
Regards,
Sharad P.

SPL block when changing the Address manually at Sales order level

Hello all, I hope every one doing well
I am facing one problem in SAP system, when I am chanigng the Partner address at sales order level , system giving the SPL block , without screening even though the customer is a good customer.
I checked in Img: GTS -> SAP Compliance Management->"Sanctioned Party List Screening" Service->Control Settings for "Sanctioned Party List Screening" Service->Sanctioned Party List Screening Strategy for Customs Docs tested with as " Status check of unchanged Addresses( Partner Address) and New check of changed Addresses.
I didn't find any difference. Sales order getting block for the above cases when changing the Address at Sales/Create document level.
Please let me know how to resolve it.
Is it related to configuration if yes how ? pr
do we have any OSS Notes to Rescreen the Sales orders with compliace even though changing the Address at sales order level ( ship to party address changes like Name, city, email id, of fax )?
or
do we need to do the Enhancement for Rescreening when changing the ship to party adress (changes like Name, city, email id, of fax )
manually at sales order level ?
Thanks in Advance
NVR

hello Sameer,
1. Whether your Embargo service is activated for the Country of Plant from which your order is getting shipped. -- Yes I have activated the Country under Embargo list.
2. Whether the partner function for which you changing the county detail has been added in into the Partner group which is assigned to Embargo services.( GTS)-- Assinged the Sold to Party ( AG) for PGEMB2- Partner group
3. Whether the country which u putting as Embargo has been maintianed under Embargo country list,
- yes
What I am doing exactly is , I am creating sales order with US customer master , but I am chaning the Country Key as Embargo country ( Ex: CU, SY, IR) at VA01 , or VA02 level Sales order header Partner tab level for Sold to party address ( changing only country key as embargo country) , not to ship to party ( ship to party still US country key only), at that time system not blocking the sales order as embargo.
please let me know if any once come across this sistuation..
Thanks in advance
NVR

UNCAUGHT_EXCEPTION runtime errors when changing the PO

Hi everyone,
We are facing the problem which is when changing the PO short dump UNCAUGHT_EXCEPTION is occurred then it will display "The page cannot be displayed"
I don't know what is the exactly that cause of this problem
Anyone who facing the same problem before, pls help on this. Hope anyone can help us on this.
Thanks,
quare

Hi Disha,
I found that only this PO cannot be change. Others are ok. There is an error in ST22 which is as below:
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_BBP_PD_ABORT
Error analysis
    An exception occurred. This exception is dealt with in more detail below
    . The exception, which is assinged to the class 'CX_BBP_PD_ABORT', was not
     caught,
    which led to a runtime error.
    The reason for this exception is:
    Übernehmen
After further search of error there is also message that relates to this error:
Buffer table not up to date
Message no. BBP_PD001
Diagnosis
In FORM CHANGE_VERSION_MAP_ORG (function group SAPLBBP_PDCV) an inconsistent status was discovered.
Procedure
Start the transaction again. If the error occurs again, create an OSS message.
To analyze the error, you can set a breakpoint in the function module 'BBP_PD_ABORT' and look at the call-up hierarchy in debugging mode.
I wondering what is the problem. Since it occurs not for all PO but certain PO only.
Please help.
Thanks,
quare

Anyone else having trouble with FCPX crashing after the OSX update?

Anyone else having trouble with FCPX crashing after the OSX update? It NEVER crashed until the update. The night before last it crashed 20 times in 45 minutes. I can't finish my project because of it.
Retina, Mid 2012
Processor 2.3 GHz Intel Core i7
Memory 8 GB 1600 MHz DDR3
Graphics NVIDIA GeForce GT 650M 1024 MB
Software OS X 10.9 (13A603)

therealamaru wrote:
I don't understand the question. I am simply editing.
There are some patterns of crashes that suggest possible causes and fixes; some users report crashes when FCPX is in the process of loading; others while importing/exporting, etc. Asking to narrow the list of possibilities.
Suggest starting with three things:
1) Update the software from the APp Store if need be.
2) Trash preferences.
3) Repair permissions.
Russ

I am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

i am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

I had a similar problem. Here is how I resolved the issue.
1. Remove Network Connect
2. Run Terminal and remove /usr/local/juniper and everything within the juniper directory.
3. Reboot the machine and reinstall Network Connect
4. Test if you can now connect.
During removal, you may encounter permission denied error, you will need to change the permission to 777. For example "sudo chmod 777 nc".

How do you change the lettering style of a adobe document that has been sent to you?

How do you change the lettering style of a adobe document that has been sent to you?

You can do this with Acrobat, but, as Claudio says, it's not possible in Adobe Reader.
If you do have Adobe Acrobat, you can learn how to modify text styles here.

How do I change the font style

How do I change the font style?

You almost certainly do not; Acrobat is not a word processor. Font styles, when they can be changed at all, are often a different font (bold, italic) or separate graphics (underline).
Where do you want to change them? There are an amazing number of places in Acrobat to enter text.

How can I change the MESSAGE STYLE for messages?

My customer complains about the big "X", as well as he thinks it's an error instead of a just message or note.
so my question is how do i change the message style then?

You only get that when you have two or more consecutive messages. Try to avoid that is one option.
You can change the icon if you want. Create another icon, call it stop.ico and put it in the icons directory (as indicated by UI_ICON). However, if you have a STOP alert, the icon changes for that alert too.
Note: this is for Developer 6i. In 9i you cannot use ico files. Use gif files instead and put the image in the image jar file (found in OH/forms90/java directory). Since you see a big X, I believe you are using 6i.

Update weight and volume when changing the quantity

Hello ALL,
For some configurable items, those whose weight and volume depends on configuration, when changing the quantity at set level, weights and volumes are not calculated again and order item is saved with wrong data about weights and volume.
when ever changing the quantity we will get a message - " Changing date/quantity may result in different BOM Please configure"
if we do explicitly by clicking "Item Details Configuration' then Weight and Volume will get update automatically.
my requirement is Weight and volume should get update automatically when changing the quantity with clicking on "Item Details Configuration'.
could you provide any OSS notes available for this or any help to achieve this functionality.

Dear Prathap Naidu P,
Did you solve this issue?
Because I have the same problem, and I was looking for hints.
Thank you so much for any help.
Best regards,
J.Flanders

Locale Input changes on Mac OS X Lion when changing the view state

On Mac OS X Lion, the following code results of changing the locale input when changing the view state. If you set the input locale to Pynin, then run the application, then click on "go to the test 2", the input locale changes back to english. This is obviously not the correct behavior (the input locale should stay the same as defined on the computer).
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
                       xmlns:s="library://ns.adobe.com/flex/spark"
                       xmlns:mx="library://ns.adobe.com/flex/mx">
    <fx:Script>
        <![CDATA[
            protected function gototest2(event:MouseEvent):void
                this.currentState = "test2";
            protected function gototest(event:MouseEvent):void
                this.currentState = "test";
        ]]>
    </fx:Script>
    <s:states>
        <s:State name="test" />
        <s:State name="test2" />
    </s:states>
    <s:Button label="go to test" includeIn="test2" click="gototest(event)" />
    <s:Button label="go to test2" includeIn="test" click="gototest2(event)" />
    <s:TextInput includeIn="test2" />
</s:WindowedApplication>

Could you please open a new bug report on this over at bugbase.adobe.com? Please post back with the URL so that others affected can add their comments and votes.

IMac freezes when changing the screen saver

Hi all:
I originally posted this in the "Using Mac OS X" forum (iMac freezes when changing the screen saver, but thought I'd post here as well since the issue arises on a freshly installed OS.
We've got three 350MHz slot-loading G3 iMacs (with 512MB RAM) which we're planning to use for basic word processing. The install of Panther (10.3.5 from black retail cds with 10-seat volume license) went fine on the first two. Ran the updates to 10.3.9, installed MS Office 2004, everything working great (they're a little slow, but after all, they are only 350 MHz).
On the third, the first problem we noticed was the computer would lock up whenever we changed the screen saver from the default (Flurry; Computer Name also works). It continues to do so even after: repair permissions; repair disk; Disk Warrior; reset pram; reset nvram; reset pmu; change RAM; change hard drive; erase hard drive; write zeros to hard drive; reinstall with different set of retail CDs; trash preferences, and delete cache files. (If there's anything I've left out, it's in the other thread).
Now we've noticed that we can't create any new user accounts. We've thought about putting this one in production, just warning the user that they can't change the screen saver, but god only knows what will turn up next.
I'm starting to think it's a logic board issue, but could it be that selective? And would you see the same problem with another hard drive and different install discs? Am I missing something?
BTW, there's a crash log with the other thread.
Andrew
Dual 2.0 GHz G5 Mac OS X (10.3.9)

I'm going to mark this one as answered.
I removed the hard drive from the iMac, and put it into another 350 MHz iMac, and everything works great. I can select any screen saver without having it freeze, create new accounts, whatever my little heart desires.
In checking the history of the problem iMac, there was an assortment of problems with booting (both from the hard drive and from the CD-ROM drive) which were never satisfactorily resolved. The problems just seemed to go away after sitting unplugged for a few days, as much as for anything we actually did to it.
Now we just have to decide whether it's worth fixing, or using it somewhere in a non-critical role with OS 9 installed.
Cheers,
Andrew

Trouble with Slurs when Changing the Staff Style

Similar Messages

Maybe you are looking for