Trouble with sound on new DVR only on playing Pandora Widget

I just got another DVR for our bedroom, already have one in Den. Only on the new DVR do I have the problem of no sound when I try to play songs on Pandora. The station comes up and all my choices are there and a song is playing by all indications but no sound. My other DVR that I've had works perfect. Called tech support and they rebooted my router and my DVR but no help. She said she would send this issue up the line LOL. Maybe someone here can tell me what is wrong?

I've got the same problem, with the same laptop - here's the bug report.

Similar Messages

Im having trouble with my volume. The only time i can hear my iphone's sound, is when i have heaphones plugged in. How do i fix this

Im having trouble with my volume. The only time i can hear my iphone's sound, is when i have heaphones plugged in. How do i fix this

Hello Malique2k14,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
No sound or distorted sound from speaker
Receiver issues
Best of luck,
Mario

I am having trouble with sound on my iPad

I am having trouble with sound on my iPad

Found the fix.
If the reboot doesn't fix it.
If the headphoens work find, but no external speakers.
If the double-click and page right to the software mute, doesn't show the sound knob - just the brightness
If your pop-up shows "Docking Station"
Then, the problem is very likely a dirty connector. The iPad/iPhone/iPod connector uses a resistor value to determine if the device is connected to an external 'speaker'. There are a range of resistances, for a range of products. This is known as the Connector Pin 21 issue.
Take some windex on a que-tip, or perhaps a Windex paper scrub and rub it on the bottom connector port. Somehow, "something" has gotten on those contacts, and it is pulling the voltage on pin #21 down - so that the iPad "thinks" it's connected to an external speaker - this will disable the internal speaker circuitry, as well as the internal speaker volume controls.
Do not over-saturate and short out your iPad. Do not throw it in the sink, do not use the kitchen faucet to flush it out. A Que-tip with a few drops of Windex (or other gentle cleaner) should work just fine. Takes all of 30 seconds - and magically, the volume knob appeared and everything worked just fine.

Having trouble with sound on my iphone 3gs ringtones work but ipod doesnt any ideas?

having trouble with sound on my iphone 3gs ringtones work but ipod doesnt any ideas? have tried resetting cleaning earphone dock and still not working

Same here, I get no sound from videos, text messages. This happens for a while, then it works again then it doesn't work. When I go to settings, my "change with buttons" is on but buttons don't work. I have restored it but there is no change. Here is a picture of my screen when i try to change volume.

Having trouble with sound quality

I have had this iPod Touch 2nd Generation for almost 2 years now, and I'm starting to have some troubles with it. The headphone sound quality is now starting to deteriorate. Unless the headphones are plugged in a specific way, either one bud goes out, or the sound quality goes down, as there is a lot of static and crackling, and I've had experiences with it actually shocking my ears while I'm listening.
I have tried a new pair of headphones, and this does nothing.
My iPod is obviously beyond the manufacturer's warranty, and it's up-to-date with the latest update. Is there anything I can do?

Sounds like your headphone jack may need replacing.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Satellite L755-16J - Trouble with sound card

I currently own a Toshiba *Satellite L755-16J* and it is having some sort of trouble with the sound card, i think.
When i bought it, it came with windows 7, i changed the windows to windows 8 and since then the audio has been troubling me.
The internal speakers work for a minute or two when i play an audio file but then stop working.
i had been using an external usb soundcard and external speakers for some time but decided to switchback to windows 7 for the sound to work properly again. even though i have switched back to win 7, the sound still doesnt work.
I am quite sure that the problem is not in the internal speakers because they do work, although just for a brief moment but they work, so i am guessing the problem is in the software instead of the hardware.
i tried updating the sound drivers but they seem to be up to date, according to windows the drivers "seem to be working properly"
Can anyone help?

> even though i have switched back to win 7, the sound still doesnt work.
How did you do that?
Did you use the Toshiba Recovery Disk in order to install Win 7 or did you install the Win 7 using fresh and clean Windows 7 disk?
The notebook supports Conexant sound chip. The sound driver is available on the Toshiba EU driver page and in case the sound chip is already recognized in device manager after the sound driver installation, I assume the driver has been installed properly.
In such case I would recommend you to connect the headphones.
In case the headphones would function properly, the speakers might be affected. I mean the hardware. But of course its only an idea.
Beside the headphone check, you could check also the settings within the control panel -> sound -> playback tab.
Usually the speakers should be set as default device.
Check this option too.

Has anyone had trouble with SIRI after new software?

Having trouble with SIRI after the new software download. any Ideas?

Basics from the manual are reset, restart, restore. Have these been attempted?

Trouble With iTunes on new PC

I just copied my itunes folder via an external hard drive on to my new PC with Windows 8. The only music that shows up in my library are the ones that can be downloaded with icloud (the music I purchased through the itunes store.) How do I get all my other music to show up in my itunes library? Thanks for any Help!

Hi, brw1124.
Thank you for the question. Here are the steps that will walk you through directing iTunes to the imported iTunes library file.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Cheers,
Jason H.

Trouble with sound

Hey-
I'm trying to import video (MPEG format) into iMovie HD, but when I do, it loses all sound. I've tried the troubleshooting tips within the program and none have worked. THe sound works when I play the video in Quicktime, so I have no idea what the problem is. Does anyone have any thoughts? Thanks.

Welcome to iMovie Discussions.
All this - and a great deal more - is explained in Dan's excellent "Unofficial iMovie FAQ", here: http://www.danslagle.com/mac/iMovie/tips_tricks/6018.shtml
[..NOTE that besides transferring MPEG clips via Image Capture, which Dan mentions, iPhoto will now normally import these kind of clips, too.]
iMovie will correctly play - with sound - some MPEG-4 files, but perhaps you've got MPEG-2 files, instead.

Trouble with sound 8.1

I've been experiencing some technical difficulties regarding the sound on my Windows 8.1. I'm using a ASUS SonicMaster laptop with VIA HD Audio deck.
Whenever I don't use any headphones or speakers connected to my laptop, the sound works just fine through the laptop speakers. But when I try to plug-in headphones or speakers, no sound comes out.
I verified if the problem was headphones, and it wasn't, it was working fine with my ipod and other laptops. I did some research to see if my driver was updated, and it was (as I said, if nothing is connected, it works normally). The driver codec is VT1802P
for windows 8, by the way.
So I started searching for anything that could've been the problem.
When I have headphones connected with music playing, and click on the sound icon on the bottom right, it shows the bar going up and down according to the music, as if it was playing normally, but still no sound. When I right-click the icon and open the sound
menu, it shows that everything is normal and the headphones are set to be the default player.
The curious thing is, whenever the headphones are the default player, and I right-click the laptop speakers listed and then click "Test", for a brief period (as long as the test ring sound takes) the headphones works. So I hear like 3 seconds of music
through the headphones, and then the problem is back. The same thing happens when I click to adjust the sound of the Laptop Speakers in the mixer and the headphones are set to default. The sound is heard through the headphones as long as the windows midi ring
takes to play, then it mutes again.
I have no idea of what might be the problem, and I've tried everything I could think of. I don't seem to find anyone with the exact same problem I have anywhere on the internet either.
It started happening about two weeks ago, before that I didn't have any kind of issues. The laptop is brand new and the headphones, speaker and cables used are all working perfectly, and so is the p2 port.
I've been connecting my laptop and my TV with HDMI cables, and then plugging my headphones or speakers to my tv, that's the only way I can make it work.
I'm sorry for my english, I'm brazilian and I'm using Windows in Portuguese, so I'm just guessing what the menus are called.
Please help! Thanks!

May I know if there is any changes for this PC before this issue happen?
Did you upgrade your OS from Windows 7 to Windows 8.1?
I would recommended you to contact ASUS regarding this issue, since I believe this Sonic master ASUS laptop using specific sound hardware and maybe software in order to sound working fine, maybe there is update driver for this PC. I try to
check from this site, I cant find any update and I found all model for this PC comes with Windows 7 only, please correct me if i'm wrong
http://sonicmaster.asus.com/global/downloads/n6/
If this PC OEM with Windows 8.1, try to do system restore to eliminate driver issue or do clean boot to eliminate 3rd party software issue

Trouble with Sound Volume on Acer Aspire 7730

Hi Forum,
since I updated to a newer kernel (2.6.32->2.6.35; first I used Ubuntu 10.04, then 10.10 which uses a new kernel, then I decided to change to arch), I am experiencing a kindof strange sound problem (before updating, it all worked out quite well):
The sound works, but the volume is very low. I have added options snd-hda-intel model=acer-aspire-7730g (this is how it is listed on kernel.org) to my /etc/modprobe.d/sound.conf and all channels in alsamixer are up at 100% and unmuted. Seems, all my sound modules are loaded into the kernel while booting. There seem to be no errors related to sound on dmesg.
Also, jacksensing does not seem to work (I can't use the internal speaker; only my headset works) - which also had worked before updating.
I can't really find anything up-to-date on the Net about reappearing sound problems on this platform, so I would be grateful for any advice you could possibly give.
The output of some commands that might (or not) be useful:
aplay -l:
Karte 0: Intel [HDA Intel], Gerät 0: ALC888 Analog [ALC888 Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: Intel [HDA Intel], Gerät 1: ALC888 Digital [ALC888 Digital]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: Intel [HDA Intel], Gerät 3: NVIDIA HDMI [NVIDIA HDMI]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
/etc/modprobe.d/sound.conf:
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=acer-aspire-7730g
/proc/asound/cards:
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0500000 irq 47

I've got the same problem, with the same laptop - here's the bug report.

Sudden Trouble With Sound

I'm almost done with a 15 minute imovie. Suddenly, my sound (both voice and music) is warbled and cracking when it sounded perfectly fine the last time I listened to it. Someone mentioned that maybe I need an update, but when I checked for software updates, it didn't help. This is imovie HD 6.0.3 on a Mac OS X v. 10.4.11 -- any ideas on what went wrong?

Hi
A. Free space on internal hard disk ?
• 5Gb or less = Troubles
• 5 - 10 => Might work but slow and instable
• 25Gb or more - As intended
B. more than 50 audio clips in movie - known trouble maker
• mix audio down to one clip on one track - mute the other two
Yours Bengt W

Trouble with Ati cards - new with recent update.

Hi folks
I have been using Arch for > 3 yrs now and it has been a work horse. I installed it on kids computer over a year ago and has been trouble free. Recently I did a sync and since then the xorg started giving problems.
I have a Ati Radeon 7000 PCI video card on it. It worked with out any trouble till recently. Now it starts ok but every few seconds or so screen goes completely blank and then reappears. Nothing in the logs and no complaints even when I start xinit/startx from command line.
It appears as if monitor connection was loose if I did not know that was not a problem. It is most pronounced when ever there is a lot of screen refresh to do, such as a menu item sprang open a lot of submenus, a new window opened or closed and so on. However this is pretty much disabling because you can;t see anything on the screen for long enough to use it.
I tried changing the driver, installed Catalyst - eventhough catalyst works ok, it's resolution is lower and looks poor ? I tried removing all the usb peripherals and tried one by one with the same problem persisting. Installed a clean Arch on another partition and as soon as radeon driver was installed it started giving same problems. I tried latest puppy and despite installing radeon driver it still worked fine and did not flicker like Arch. However I don't like puppy for this purpose and hope to maintain Arch.
Is there a way of figuring out what causes these flickers and rectify it. I put PCI=nomsi on kernel command line to turn off kernel mode setting. Tried /etc/modprobe.d/radeon.conf with modesetting=off, tried removing stuff off from /usr/lib/xorg/modules/dri/*. None of these made much difference.
Any help greatly appreciated.
sk

I kind of solved it for now.
Try " X -configure" to create a new xorg.conf.new file and move it to /etc/X11/xorg.conf.
Edit the /etc/X11/xorg.conf and under the video card section put a
Option "NoAccel" "On"
At the least it is not driving me crazy with blinking and flickering.

You can have BIG TROUBLE with FIOS (half phone line only)

Hello world,
I got the FIOS mid-September,
and this week it will be one month since my phone line broke for a lot of people (they can't call me anymore),
and Verizon can't do anything to correct their misconfiguration.
So, I am alone, with half of a phone line and with an operator (Verizon) who is doing nothing.
My situation: people from Cox Communication (a famous but local operator in my state) are impossible to call me (when they try they receive the information my number doesn't exist) because I asked to Verizon to keep my number and to move it from Cox to Verizon FIOS (so, I wanted to keep my number, very simple, but impossible for Verizon).
For 4 weeks, I am trying to explain this simple situation but their answer is "all is fine from Verizon".
Does anyone have an idea to solve this stupid situation?
Thanks

Understand that if this is impacting incoming calls from people uing your old "phone" company but not calls coming from other service providers (i.e. non-Verizon but not Cox customers either), then the problem is on Cox's end.
Cox never deallocated your number properly when you ported it over to the Verizon -- so they still have it defined in their tables as belonging to them and when people try to call it from on the Cox network, it goes to a disconnected number deadend.
If this is the situation you have, then you must call Cox and tell them that you "ported your number out to a new provider" and ask that they "release and deallocate" the number from their system as they no longer own it so that calls from customers on their network witll terminate properly. It will take some persistence and you'll probably need to get past the first level tech support person and make sure you get someone who understands the phone network definition process to get them to fix it.
If you can't receive calls from anyone -- except other Verizon customers -- then it's a Verizon problem in that they haven't properly completed the port of the number from your old provider -- who is probably still holding the number in an inactive state. If this is the scenario, then Verizon is the one who has to fix this.

Having Trouble with sound when hooked up to my Car stereo

I have hooked up my iPod to my car stereo and it sounds horrible. I dont know if the guy that did it, did it wrong but all support is telling me is that to hook it up with the cords i have. Any help from people? thank you

Does your ipod play through your car speakers.
Im guessing it does.
I am rather confident that your problem is solely thanks to the volume not being correctly done. To make it louder, use the car not the ipod.
Keep the ipod on a low volume.
Good Luck!

Trouble with sound on new DVR only on playing Pandora Widget

Similar Messages

Maybe you are looking for