TROUBLE with the K7N2-DELTA
I just purchased and set up a K7N2-DELTA. I am having a problem. I cant get to the bios... all I see is the slpash screen with the 8x graphic.
My D-Bracket shows three green and one red and unless the manual is wrong it means that the floppy is being initialized.
I have tried switch the cable around ever which way, clearing the CMOS and restarting, tried three different floppy drives, two different cables but all I get is a fancy 8x graphic and a red light. I have tried to boot nothing but a video card (GeForce MX440 8x 128mb), one stick of ram (512 kingston pc266), HD (WD) and a CD drive (took off the floppy) and it still isn't working.
I will try any suggestion besides throwing the MB out the window :o).
HELP PLEASE!!!!!!
I have also tried pushing DEL before the graphic appears and then the D-Bracket says initializing the memory. I even switch between 1 and 2 using 1&2, 1&3, 1&2, just 1 and just 2.
I cant believe that I bought this new board and I cant even get to my BIOS... any and all help would be appreciated. X(
Your right the D Bracket is not correct and has actually hurt instead of helped me troubleshoot.
After more trouble shooting I think it is my HD that is at fault here. Maybe someone can relate to this and or has a solution.
I have the following set up
IDE 1
Master- 40gb HD (which I will refer to as HD1) (which is the one I'm having problems with)
Slave- 40gb HD (which I will refer to as HD2)
IDE 2
Master- CDRW
Slave- DVD
I'm having some real issues with this. Again my system wont go past the slash screen before bios. I can get past this problem by doing the following.
On IDE1 put CD drive as master and set HD1 as Slave. It will boot to bios but the bios wont read the HD1 and it says the CD is IDE1 Slave. I dont understand this because the jumpers are set as master and it is the first on the IDE cable.
I have hooked HD1 to another system and ran WD diag floppy and erased the entire thing and tested and it says no errors are found.
Move the drive to the MSI board and I'm stuck at the splash.
I have tried moving jumpers to CS and SLAVE and standalone but no changes.
HD2 is my old C drive so I dont want to try this as MASTER and re-install XP or I will loose data.
Hopefully this will find someone who has experiance the same or similar problems and have some advice for me.
One more thing.. on a seperate comuter HD1 reads as a drive in XP and works fine... just cant get to to work on the new board.
ANY SUGGESTIONS????
Similar Messages
-
Can I have an oppinion on the K7N2 Delta-ILSR
I'm looking for my next board and after reading this article dated:August 2003,in Maximum PC mag, I wanted to know more. I have always been a Pentium guy so I don't know anyting about AMD and it's compatibilities...what is a fast processer for this board..?
How would it compare to the Pentium in Gigahertz?
Is this mother board even worth the trouble..?
So many questions, so little time.I have and love hate my MSI K7N2 Delta when its working its a great board but it can tax you at times.
I've learned a lot in building this one. I have been building computers for years started with the K6 III 450 and a FIC motherboard.
I never had any problems with any of them just put togather load and use.
The only other time I had any real problems with any of my computers was when ME came out I jumped right away what a mistake that was it was mouths before all the drivers where fixed and even than some never got fixed and had to quit using some of my hardware like a sound Card etc.
The Nvidia chipset that is the heart of the K7N2 Delta is very picky about what ram you use even some that look like there working can give you headaces.
Also they take very good power supplies the cheap 300 to 400 wat power supplies just won't hack it. Get a good one. Antec, Enermax etc. -
Can't install OEM version of WinXP on the K7N2 Delta!??!?
I posted on amdmb.com's forums about how I cannot get WinXP to install on my hard drive connected to the k7n2 delta. Wonkanoby, a senior moderator on one of the boards here, and a visiotor on those boards at amdmb.com, stated that OEM versions won't work on this mainboard and you have to have a retail box windows version. Is this true? if so, this is complete crap! If MSI thinks I'm going to spend $150 bucks on a retail boxed version of Xp when I have a perfectly fine working copy right here, they are N U T S!!! This has got to be the most outrageous thing I've ever heard concerning mainboard issues. I hope MSI realizes they will either be working on a bios fix or they're paying me the restocking fee to send this board back to Newegg.
http://www.duxcw.com/faq/win/xp/oeminst.htm
How to Install the OEM Version Windows XP Professional
Last updated: 6/18/02
Q. How Do You Install the Windows XP Pro OEM Version?
A. I install it on a new computer (or hard disk drive taken down to "bare metal") from the DOS prompt with a Windows 98 Startup floppy (http://duxcw.com/digest/Fromshop/software/windows/startup/startup.htm). Put a copy of smartdrv.exe on the Startup floppy. You should be able to find a copy on and existing Windows 9x/Me computer at C:windows. It is on the CD’s in D:win98. Boot to the floppy and use fdisk to partition the drive (the process the same as that at http://duxcw.com/digest/Howto/software/windows/upgrade/fdisk.htm. Format the C: drive. Do not install the system files. If you have more than one partition, they can be formatted during the Windows XP installation or with Windows XP after it is installed. Also, use fdisk to manually make C: active if there is more one partition. Load smartdrv.exe…
A:>smartdrv.exe
…and run D:i386winnt.exe, where D: is your CD-ROKM drive.
Do not delete or reformat C: with this method. Winnt.exe copies the install files to that partition. You can convert it to NTFS and that process is fast. It should also work if the i386 directory is copied to a scratch hard disk and the hard disk is connected to the secondary IDE interface.
OEM = Original Equipment Manufacturer = a company that makes/markets computers (and parts), etc. which include parts made by other companies, and not the “original” manufacturer as OEM implies, just masquerading as one. Licenses of OEM versions of Windows, etc. software are sold to computer manufactures for installation on new computers. They are full versions of Windows, not upgrades. They are widely available on the "grey market" and Internet and cost considerably less than retail full versions. Just be careful not to purchase a pirated copy. -
Does the K7N2 Delta-L have LBA 48 addressing?
I want to add a 250GB HD but the FAQ for the K7N2 Delta says that it can only support up to 160GB drives. It should be able to support drives higher than 160GB if it has LBA 48 addressing, right? I don't if it does. Or maybe the FAQ is just out of date as it could have been made before 200+ drives existed? All I'd like to know is if I install a 250GB drive on this mobo it will not be detected as a 160GB. And yes, I have XP SP2. Thanks.
hello welcome to forum.
yes your mobo support LBA with 48bit addressing.
if you add 250GB HDD will detected correctly at his full capacity. -
MOVED: need help with my k7n2 delta series motherboard please
This topic has been moved to AMD SocketA based board.
need help with my k7n2 delta series motherboard please"...the other memory ive been using is memorymaxx 512mb ddr 3200..." If I understood right, your'e actually using both memories at same time so, your'e lucky if it works. We have said thousand times that mixing dif. brand/make/speed memories is a bad idea, most with this Mobo that is very picky about ram. If you want to avoid slowdown problems, stay with only one stick ( the better one ) until you can buy at same time in same store, 2 identical memories to replace the old one.
-
I have my memory set to CAS2-3-3-11 in the bios of my K7N2 Delta-L, but CPU-Z reports it as being CAS2.5-3-3-11. Can the K7N2 Delta-L run CAS2?
Thanks gents.Can now run CAS2 with the 5.6 bios. Thanks liquidsoul
-
Is PE10 compatible with Windows 8? Having trouble with the organizer.
Is PE10 compatible with Windows 8? Having trouble with the organizer
It does sound very Watch Folders-esque, however, it seems strange that there are many folders involved. Are all the folders under a single parent folder perhaps? If so, you could try renaming or moving that folder. Additionally, to clarify, all 60 files are images, correct?
Additionally, you can try creating a new catalog, just to see if that lets you in. Hold down the Shift key while launching the Organizer. If you get the timing right, the Catalog Manager will appear. -
Troubles with the creation of New Custom Adapter for NW 7.1
Hi guys !!!
I have some troubles with the creation of a new custom adapter for NW 7.1. I have followed some pdf and notes, like :
[Upgrade an SAP NetWeaver PI 7.0 Adapter to SAP NetWeaver PI 7.1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0667f56-96c7-2b10-0e9a-c40fbd523f4d]
note : 1004000
I have all the materials to make the custom Adapter ( like file .sca with all .rar and .sda , like file sample_ra.rar with all the file .java, like all the libs for the projects ) and I have make it !!! But, when I try do deploy it, i recieve a warning that i don't understand, this is the warning :
S U M M A R Y
~~~~~~~~~~~~~~~~~~~
Successfully deployed: 0
Deployed with warnings: 1
Failed deployments: 0
~~~~~~~~~~~~~~~~~~~
1. File:C:Users
maienzaDesktopCreazione del SDAPI71_AF_myFirstCustomAdapter_ver_2.0.sda
Name:PI71_AF_myFirstCustomAdapter_ver_2.0
Vendor:sap.com
Location:SAP AG
Version:7.1007.20090310105326.0000
Deploy status:Warning
Version:NEW
Description:
1. Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
No one of the [EJBContainer] containers, which processed it, returned deployed component names.
The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
Possible reasons :
1.An AS Java service, which is providing a container, is stopped or not deployed.
2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Result
Status:Warning
I have see in the nwa if there are some applications or services that are stopped but all the necessary it's started, just one question : in the pdf for upgrade from 7.0 to 7.1 no one speaks about ejBean or about a creation of it ... it's necessary an ejBean ?? Beacause in the file .sda of the file .sca that i have downloaded there are more of the adapter with ejBean ....
AntonelloHi,
the adapter metadata it's been created but my service is still stopped; when I try to start it, in the NDWS -> Deploy view -> tab Repositary view, I receive this errors, one after the other, cause I try to start it 3 times and in each time I received 3 differents errors :
Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
... 30 more
Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
... 30 more
Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
[ERROR CODE DPL.DS.6193] Error while ; nested exception is:
com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
No one of the [EJBContainer] containers, which processed it, returned deployed component names.
The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
Possible reasons :
1.An AS Java service, which is providing a container, is stopped or not deployed.
2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304) -
Help
I need any help i can get, im having trouble with the app find my iphone. I have lost my iphone, checked on the computer, and somehow, took it away so how do i get it back??If you are saying that after signing into iCloud it is telling you device is not found, it could be for any number of reasons. If the battery is dead, if the SIM has been removed, or if someone else has the phone and they have restored it, it will not be shown. Also, if you located it once and then sent a remote wipe, it disables the abililty to locate the phone with Find My iPhone.
-
I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!
I have a Mac, IPad, I phones, and 2 Windows Vista Pcs and I'm having trouble with the Windows Laptop staying connected. I have to re-boot after an extended period of time please help. Thanks!
-
I am having trouble with the Jpeg icons and also now thumbnails not being visable in bith teh Apple finder and now also Adobe Bridge. Can anyone shed any light on this ?
Argh - once again, I find my solution right after posting this. Left out one modification to the SWIG script, now it runs in 29 seconds vs C 16 seconds, I can live with that.
-
I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work. The message appears "building criteria" and I get an endless loop on the lower left panel. How do I correct?
You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.
-
How can I find out what my password on the computer is? I had to change it due to my teenagers helping themselves, and now every time there is a system update, I have to have the password, which I cannot remember or find. It then wants it every time I log in and pops up Key Chain Access as well. Very annoying. I do not have the disc to reload it and fear I would loose everything on my computer as there is also trouble with the back up system. Too many issues and not enough solutions. Many thanks in advance!
I do not have the disc to reload
Why not? You need your system dvds to troubleshoot & to reset/change passwords in view of your current OS listed in your profile.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.
===============
I have to have the password, which I cannot remember or find.
When selecting passwords, make sure it's one that you will NEVER forget AND no one else can figure out.
Old school--- > Print it out & keep in a safe place. A place that ONLY you know about AND never forget.
New school---> Get a password manager utility. Highly recommend 1Password which is shareware. Do a Google search for free password managers. -
I rented Trouble with the Curve and haven't it yet and I when I went to watch the movie it tells me the file can not be found - please help
Yes, thank you. My apologies, I was typing one handed and did not add that.
Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH! -
In fact this happens on some computers. the graph XY causes some trouble when zooming. Sometimes, when I run my main program and open the window with the graph, it has change the displayed it overflows to the edge of the windows. Or somtimes it works but if I zoom the curves disappeared, or is corrupted.
I have this for instance on a computer with win 98 and a ATI graphic board. So I try to update all drivers but noting has changed. I try to decrease the hardware acceleration, and it seems to happen less oftenly.
Does anybody have seen that kind of trouble ?> I have some trouble With the graph XY, if I display a curve and try to
> zoom on it, it may be corrupted, or may disappeared.
>
I think what you are describing is not due to video driver, but rather
to the way the graph works. The LV graph maps points to integer screen
coordinates and draws lines be tween those point. When the numbers are
way to large to fit on the screen, the numbers are pinned to a special
large value. When this happenson one axis but not the other, it causes
the slope of the line to change and potentially not cross the screen.
If this is the same effect I'm describing, it only takes place when you
zoom into the data by a large extent, pushing the other points about ten
to fifteen monitors away. At this point you are no longer
looking at
measured data, but rather just on the interpolation of a line between
two points. The solution if you must have one is to resample your data
on the diagram to contain more points.
Greg McKaskle
Maybe you are looking for
-
I have always managed to fit 65 minutes on a DVD disc with no problems but now need to get 75 mins on to a disc. I have never really got my head round bitrate conversion tables - In DVDSP2 I normally use Target bitrate - 6, Max Bitrate - 8 and motion
-
Recently, I accidentally closed the lid of my MBP before it shutdown completely. Usually, this would cause a problem on the startup the next time where I would push the power button and the only thing happening is the light on the latch button would
-
Nokia N8 screen goes black in sunlight
I have this peculiar problem. Whenever i make a call walking in broad daylight (exposing the screen to the light) the screen goes black and it takes sometime before i am able to hold or end that particular call. This happens only when i make a call u
-
Loyalty Management/Rewards/Incentives In Ondemand
Do we have something related to Loyalty Management/Rewards/Incentives In Ondemand. Something similar to a On-Premise functionality but on a smaller scale. Sandy
-
Hello. I have premiere elements 12, and have tried to open a new project, but nothing happened. All you see is a purple and black ribbon, then nothing. I can open the organizer without any problem at all! What I have done so far: Accepted all wind