Trouble with thermocouple example...
Hi,
I'm using SCC-TC02 connected to a thermocouple probe (K).
Are trying to use the "Acq Thermocouple sample" example vi. But I only get the value -1908625864800603,25 and nothing else...?
(CJC source: constant, 25)
Any ideas?
Hi again,
Just updating this thread...
It looks like I get a value from an unconnected channel... But is isn't. The value is always the same. If I instead meassure voltage from SCC-TC02 input, then it works..
I hope someone understand me and give me some ideas...
Similar Messages
-
I am looking for support for the example that is in the tutorials . i was trying to build the BuildingArray.vi that is in the tutorials of the LabVIEW .I am not able to get the array built within the single array block.
Please give me the step by step procedure of how to build this
Attachments:
arrays.llb 102 KBI presume that you are having problem in building the
B-While Loop in "Building Arrays.vi"
And, I also assume that you didn't manage to get the random number output as an 1D array.
Steps:
1. Place the Random Number function in the while loop
2. Wire its output to the while loop
3. Right-click on the Intersection where the Random Number's output joins the while loop and Select "Enable Indexing"
4. Wire it to the Numerical Array Indicator
Hope this is what you are looking for.
regards
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com -
I am having trouble with my links/websites having images attached to them. The place where the image should be is blank. For example, AARP has an A for its image. My storage website has a blank broken box where the image should be. I forgot I had trouble and had to reset Foxfire, this problem occurred after that reset.
cor-el,
Mixed content normally gives the world globe image, unless you are using a theme that uses a broken padlock instead. Maybe the gray triangle means invalid? I came across that in a few themes (what is invalid was not made clear), but those were not using triangle shapes to indicate that.
I came across that mention in one of the pages you posted:
* https://support.mozilla.org/kb/Site+Identity+Button
I cannot attach a screenshot because I have not seen a triangle of any kind in my address bar. -
Trouble with examples from the website
Hi
I was trying to down load couple of examples from your website - Motor
control, closed loop control system. But have trouble with it.
I have Labview version 5.1 not 7.
It gives an error after I unzip the file.
Are they not compatible with 5.1??
Pls help
KrithikaWhen you download an example from the NI homepage please always have a look at the "Software Requirements" section. Here you will find the version of the development environment the example was compiled with.
Many examples are compiled with LV 6.x or LV 7.x thus it's probable that you can't open them with LV 5.x
Best regards,
Jochen Klier
National Instruments Germany -
Trouble with 3rd party VST installs for Garageband, can't find instruments
Hi,
I am having trouble with Audio Units for Garageband when installing 3rd party software, VSTs, loops, instruments. I have more issues with Logic Pro. I am hoping that it is the same underlying issue and that I am just missing something. I have the manuals (not great for troubleshooting). I am confused with some installs use User Library and others use the Computer Library. I do go to the mfgs sites for updates. The installs sometimes work as standalones but I don't see ALL of the components of the software in say Garageband or Logic. Mostly, I am missing the "instruments" and "loops" that I want to access within the DAW. Some examples:
• Here is some of the software I am talking about: East West sample libraries (Play and Native Instruments); Vienna Symphonic librarires; Sylenth1 (just last night); Sample Tank 2 and Total Workstation 2 from IK Multimedia and others.
• In GB I see the Audio Units for Vienna, Play, Sylenth, some of the IK Multimedia but NOT any instruments when I go to the "Sound Generator" -- I seem to be missing the instruments and loops. I see less AUs in Logic Pro. Some of these are VST instruments.
• Can I just drag-drop samples to the library folders to fix this?
• The plug-ins do not seem to work (though Sylenth1 worked for a single sound). When there is a standalone app (as in Sample Tank), I finally got the "sounds" to be reinstalled and loaded, those sounds/samples don't show up in any DAW.
• When and if the sounds/loops/samples show up in GB's "Instruments" section will I be able to tell that they belong to that particular software or library?
Thanks in advance.
JohnFound the answer myself, it was simple:
• Select the Track
• Show the Instrument (info area)
• Click on Edit
• Click on the "Sound Generator" pop up field.
• At the bottom of the pop-up list, select from the Audio Units that you have installed. This is where you see "Sample Tank 2, Vienna Instruments..."
• NEXT -- IMPORTANT: CLICK ON THE PICTURE next to the Sound Generator pop-up field.The AU unit loads up, the interface pops up, you load up the instruments in this AU Unit. You do NOT see the sounds from the AU unit in the normal Apple instrument list.
This was not intuitive but once you know it, fairly simple.
Still, the devil is in the details -- more questions on the way. -
The trouble with 'expression' -- how to edit that
I just walked to the corner bodega ( even though its korean sooo bodega is misleading ).. to get some beer...
ITS BEER THIRTY -- yipee !
and on way back down the block where I live ( which is suburban ) some boy kid on a bike was riding and playing with a girl kid ( probably was his slightly older sister - these kids probably around 12 years old ) in front of a rental property with some spanish americans hanging out in their cemented yard on hammocks near bar b q...with their own kids...(they have planted another hopeful "veg garden" around the perimeter of their so called yard...tomato plants etc )...so anyway, the picture here is a "neighborhood" of sorts with a somewhat lower middle class family atmosphere in a fairly lower class area on the verge of becoming middle class ( with God's help ).
And anyway, I passed by the boy kid on the bike and smiled at him cause he seemed to be a decent kid having fun with his friend ( they were sorta laughing about something and having fun before I showed up as the big "adult" and looked at me ). His smile back was like sunshine and true and he immediately recognized he could keep having fun with his friend and I wasn't a "threat" , but instead some sorta "neighbor". She did the same more or less ( I think she had some devious design re: the game they were playing ... like " OK, you think you're so great on that bike, try to CHASE me ! " or something like that....kid stuff... and fun thank God. This neighborhood has it's share of bad things going on in the streets at times. And that leads to my focus on " The trouble with expression".
A lot of people, like me for example, can't express themselves well in some ways. I didn't say , " Hi there kids ! What's new ? " when I met them on the way back from the bodega. I didn't stop and ask what the heck they were laughing about. Nor did I speak to the spanish people adjacent to the kids ...in their "yard" ...with the bar b q and hammock and obvious friday afternoon socializing they were into....
We in nyc area are typically a mixed bag of races... I'm white, kids were african amer ( black but more like brownish if you ask me ), spanish people like mexicans IMO... who cares. This is suburbia so you can imagine how more mixed it is in the city.
Anyway, the reason I don't express myself so well in situations like that ( spontaneously on the street ) is cause I used to stutter real bad as a kid.. couldnt talk... so I clamed up. All my life I've been fighting that disability ( and other "challenges" re: learning, reading , writing, asthma , etc ) in terms of the "repercusions". Kids like me make fun of me cause I stutter...I can't fight back verbally and lash out physically... become a "maniac". Get kicked out of city schools etc... Trouble maker. Can't express myself, fight back with words....when kids are mean to me. After a while they dont matter much as if they are mean I just keep quiet and keep mouth shut and start "thinking" instead... how to keep on top of this person and not let things get crazy... meet the challenge.
Turns out I'm not stupid and at some point my being " quiet" becomes a positive thing.. peers start asking my advice.. I'm suddenly a " deep thinker" in their eyes. I go from being disabled ( stupid ) to being " a deep thinker" about the age of puberty... when nobody knows what they are doing anymore.
I start thinking about expressing myself some other way than talking.. like maybe draw pictures... paint stuff, do things to have fun with people that doesnt put me in the " limelight".. where I have to talk etc. More success follows this tendency to socialize and express myself... and I discover that chics like the strong silent type.
( I have been into gymnastics thru my fathers infactuation with it since age 2 -- which I think eventually ( inadvertantly ) " cured me " of many of my learning disabilities etc -- (talk to an OT about this and modern child development stuff to know what I mean here )
Meanwhile I am very fond of dogs as my family has dogs one after the other and I am one of their best friends. I find I can communicate with dogs better than I can communicate with people sometimes. This seems to be a problem in some cases with some people, but for me it never got crazy... where I " loved dogs " more than I " love people ". I have never loved any dog more than any person and shudder when I think of those who do. Those people who do have more problems than I ever had to deal with.
And now, after all these years ( I am now 60 ), working on movies and tv stuff etc as a crew person with some college fine art schooling ( eventual photo major ) to get me started, I got into this " editing " stuff... A program I can actually " use " on my mousey computer introduces me to a more " final product " than I ever had access to before.
BUT I don't shoot motion pic stuff, cant afford that - and never could before basically, and now I think about the triple threats and future of movies and tv as a business... as well as the tools ( in this case the editing programs in conjunction with the cameras ( arri, panavision etc ) ) and the desire to express something ...
This has to be ( if you want an audience ) ... " tell a story ". You could just put a camera on a rocket ( strap it to the rocket ) and shoot the takeoff etc and show that.. but you need a V.O. saying " well, I just shot off a rocket and this is what it looked like"...to bring the experience to the audience... or else IMO there is no story.
Which leads to what's going on now in the world of reality tv, episodic tv , some big movies, etc. Telling a story is more than showing you stuff that you just wouldnt have seen if you hadn't been there yourself. Telling a story is more like saying something that bridges the gap between your own experience of life and its challenges ( of being part of your neighborhood and making sense of your own childhood and being an adult now maybe ).. and what others also have gone through to get to the same conclusions....
This is the object of " expression" IMO, whether you can talk about it, draw pictures about it, or make music about it...
And the editing program is a tool to help do that.. it is not the end all or purpose of life or the " personal crusade" in the long run.
It's one reason scary snakes often shock people out of their desire for comfort and predictable living... makes you think about that one serpent in the garden of eden you create for yourself .... and IMO who cares what editing program you use to write that and shoot it ??Steve Grisetti, the MOD of the Premiere Elements forum and co-founder of a video/photo/editing Web site, Muvipix, did a nice article, "Don't just make a movie - tell a story." His audience was more consumer video editors, than the folk that we see around here, but his points were well-made, and were embraced by many in the Muvipix community.
I think that too many, forget that concept - and I am talking Hollywood and NYC here. It's almost as if, when the story breaks down, they instinctively know to throw in a car chase, or big explosion.
I know that I cite it too often around The Lounge, but that was what I enjoyed most about the LOR trilogy. It told a story. Now, though I had some exposure to the story, when much younger, I have to admit that I never read Tolkien, though almost everyone, that I knew, was busy with every book. Still, I only knew some of the high points, and not much more. However, almost immediately, I was drawn into the story, and only wished that I did not have to wait so long between episodes. The FX were cool, and I am a technoid sort, but it was the story that hooked me. I had read several articles on the FX production, so WAS looking for some of that, but what I wanted was the story. This is one that I will buy the BD "Director's Cut" of, and do a marathon. I have seen each segment, maybe three times, but never back to back to back. I still need to fill in a few blanks, and an entire day of viewing should do that - no phone, no visitors, nothing but LOR.
As far as human communications, I can talk, even more than I write here, but only concerning things that I care about. I am horrible at "small talk," and would rather addrss an auditorium of 10,000, on something that matters to me, than talk about the weather to a single person at a fund raiser. Not that long ago, I was seated next to a potential donor at a charity dinner. I was rather dreading it, and when she mentioned that she did not drink (what, no wine?), I was worried. At some point, early in the evening, the subject turned to politics. Now, I usually am very quiet on my feelings, as they are not exaclty politically correct, and worry about hurting feelings, or making a scene. I fielded a question on Senatorial candidates, and just decided to answer from my heart. Her eyes lit up, and I did not notice that the event had ended. Her husband was standing, as was my wife, and we were talking politics, talk-radio, FoxNews, Senator John Kyl, Will Rogers and much more. I found that we were kindred spirits. Finally, our spouses pulled us apart, and we departed. We continued that conversation at 2 - 3 more events during "the season." One day, my wife informed me that she had just given $10M to the foundation - the largest single gift ever. At least she wasn't a screaming liberal, as I would surely have really messed up the deal... However, had it all been small talk, I would have found a reason to excuse myself and hide in the bar for a few hours.
Also, the way that our society has developed, I will smile, nod, and say "hello" to strangers on the street, but always leave it at that. I am sure that many walk past and think "he wasn't all that friendly." They are probably right, but at least I was pleasant to them and did not rob them! Heck, I will usually tell telemarketers, "No, but thank you for your generous offer on that time-share... "
Hunt -
I am really in trouble with AP Div-How do I fix it on the web?
Hi,
I am really in trouble with my website. I have added some pictures and text on top of Fireworks Image and have published it on the website.
But the concern is, when I zoom in & zoom out, I can see the previous text on the screen and also the picture and texts I have added using Ap Div tag are scattered moving all to the left when I zoom out. Can someone help me how to fix this in one particular place so that it doesn't move when I zoom in or zoom out!!! I am using Adobe Dreamweaver CS3, if this will help.
Appreciate your sincere help on this.
Thanks in advance.Frankly, there's a lot that is wrong with that page:
1. Most of your content is in the images - this means that you will get very poor search engine ranking
2. Your extensive use of absolute positioning for layout - this means that when you enlarge the text size in the browser, you will have overflow problems on the page (for example, the terrible problems at the bottom of the page)
3. You have used tables for layout - this is because of your use of Fireworks to create the HTML
Each of these problems is solvable but none of them are solvable easily without a redesign of the page. A web page should be built from the top down, stacking content containers (i.e., <div>, <section>, <article>, <aside>, etc.) vertically or floating them horizontally or both. These containers would be loaded with the text content of the page, and images would be used only for cosmetic appearance. Using CSS to style/locate the content will allow you to completely move away from tables for layout. Most typical pages can be created without the use of absolute positioning which should be used only for special purposes, not for layout of the page elements. -
Trouble with Lumia 800 Marketplace in Bulgaria
i have trouble with the marketplace in Bulgaria...but this happenes to me with my account here....as i mantioned in my post i have a friend with the same device (Nokia Lumia 800) and he is not experiencing any ot those problems may be because hi is registred in UK London.he Had all the apps and he could bought any of them ...not like me( the most of the Apps in the marketplace are paid or are not working for my area....even those that i bought in past,for Example (mycarmanager) wich is a great app...Now i bought e new phone and i want my apps in my new phone but they are not exist anymore and i cant find them in the marketplace for my country even Nokia collection is missed like (Nokia Drive ,Counters, Nokia Maps ,CityLens....and etc.).All the collection of Nokia apps is missing..I don't know what is the problem ,but when i talk with my friends i understude that this seemed to be a restriction politics of Nokia including Microsft....I don't know exactly what,but that is not my problem ..I have my first Nokia in 1994 (Nokia 8110) and till this momment i didn't have any troubles with all my Nokia devices at all...I am a fen of Nokia and i Love Nokia but this time i feel myself discriminated by somebody i don't want to believe is Nokia...But i want a solution..Please tell what or how can i get throu this...Thanks..
Hi
What country is you Live ID associated with? What language is your device set to and what region is your device set to?
Make sure all these settings are the same.
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users! -
Trouble with mobile site. Displays for a second then screen goes black.
Trouble with mobile site. Displays for a second then screen goes black. Using safari, 4s on Verizon. Example: m.mlb.com/lad/
I hadn't checked the site since January or so, when it worked. It might be related to the Opening Weekend skin they have on the site, but for me, it shows the top part of the page for 3 seconds while it's loading (scrolling down is impossible) and then all of a sudden it turns black, showing nothing. It's that way for every MLB mobile site.
At first:
Two seconds later:
I noticed this on 4/7/12. Does anyone NOT have this problem?
Matt -
i am doing an assignment and im having a lot of trouble with it.
here is what it is asking for
read a value representing a number of seconds, then print the equivalent amount of time as a combination of hours, minutes, and seconds. (For example, 9999 seconds is equivalent to 2 hours, 46 minutes, and 39 seconds).
and so far i have this
package Convert;
import java.util.Scanner;
public class nSeconds {
public static void main(String[] args)
long Seconds = 0;
long Hours = 0;
long Minutes = 0;
Scanner scan = new Scanner(System.in);
System.out.println("Please enter the hours: ");
Hours = scan.nextInt();
System.out.println("Please enter the minutes: ");
Minutes = scan.nextInt();
System.out.println("Please enter the seconds: ");
Seconds = scan.nextInt();
Seconds = (Hours*3600) + (Minutes*60) + (Seconds + 0);
System.out.println("The total number of seconds is: " + Seconds);
please help me with the formula
thankssorry that was the wrong app.
this is the code i need help with
package Convert;
import java.util.Scanner;
public class reverseSeconds {
public static void main(String[] args)
long Hours = 0;
long Minutes = 0;
long Second = 0;
Scanner scan = new Scanner (System.in);
System.out.println ("Please enter in the seconds:");
Second = scan.nextInt();
Hours = (Second / 3600);
Minutes = (Second / 60) + Minutes;
Second = Second / 60;
System.out.println ("Hours:" + Hours);
System.out.println ("Minutes:" + Minutes);
System.out.println ("Seconds:" + Second);
System.out.println(Hours + " Hours :" + Minutes + " Minutes:" + Second + " Seconds");
} -
I'm having trouble with my simple calculator, which is similar to the calculator in "cocoa programming for dummies".
http://public.me.com/schoolkid144
its firstproject.zip
The trouble is that when I get the value of the two text fields, it always returns 0 even when the value of both text fields is 1.Hi S-T Programmer, and welcome to the Dev Forums!
The connections between the FuseBox outlets and the three text fields just need to be reversed in Interface Builder. An IBOutlet instance variable is associated with an Interface Builder object by Ctrl-Dragging from the object which owns the variable to the object the variable wants to reference. For example, to connect the FuseBox ivar named answerField to the text field which is to display the answer, Ctrl-Click on the FuseBox icon in the xib window then drag to the desired text field object. The text field object may either be found as an icon in the xib (Document) window, or as the full-scale drawing of the object in the IB Editor window (where you lay out the view). When you release the mouse at the end of the drag, a black list of all the FuseBox class outlets will pop up. Select the outlet you meant to connect (in this case answerField), and the connection will be made.
The problem with giving IB instructions in the forum is that a picture is worth a thousand words, and this post is on the wrong side of that equation. So I'm hoping you'll be able to see enough of the picture from all these words. There are two other ways of making IB connections that are harder to use, but easier to explain:
1) If you Ctrl-Click (without dragging) on any icon in the xib window, a floating, black panel will pop up showing every possible connection to that object. To make the same connection discussed above from the answerField outlet to the right-hand text field, Ctrl-Click on the FuseBox icon and find answerField in Outlet list. You can now drag directly from the connector symbol to the desired text field. This time there's no popup when you release the mouse because IB already knows which outlet is to be connected. After the connection is made, you can Ctrl-Click on the text field icon and see its connection panel. You'll know the connection is going in the right direction when the connection to the text field is listed under +Referencing Outlets+ and the connection back at the FuseBox object is listed under Outlets.
The floating, black connection panels are especially useful for deleting connections. Since your project currently has three backwards connections, you can use these panels to delete those by clicking on the 'X' which is visible on each connection line.
2) There's also a tab in the Inspector window for making connections. Select one of the objects you want to connect and select Tools>Connections Inspector from the top menu if you have trouble finding the tab. You can make connections in this window if you want, but you can also use the Connections Inspector to view the connections previously made by dragging.
This topic is covered in more detail (including some screen shots! yay!!) under Creating and Managing Outlet and Action Connections in the +Interface Builder User Guide+.
I think your connection between the Calculate button and the FuseBox was correct. This post has gotten so long I can't remember if I had to reverse that one too, but I don't think I did. Anyway you'll be able to check for yourself now that you know what to look for, right? The connection between an object's Sent Action and an IBAction method goes in the direction opposite to an IBOutlet connection. Thus to connect the Calculate button you need to drag from the button to the FuseBox.
_Outlet from_ the FuseBox
_Action to_ the FuseBox
Hope that helps!
\- Ray -
We have during the last month started to get problems where the Vadis application
stops working. We can't figure out the cause of this.
Recent additions to the application is that we have started to use RMI for our
client communication - currently we are both using CORBA (OrbixWeb 3.1c) and RMI
- planning to get rid of CORBA. We have also some new features that increases
the amount of tasks to perform.
The system can hang both under heavy load and under off peak hours, when many
clients are connected or when nobody is using it!?! Strange...
This happens approximately once a week.
Today we managed to get a JRockit dump (with Ctrl-Break) - see attached file.
The main thread that should run all real tasks is Schemaläggare, but the stack
trace indicates a really weird place to stop. When looking at the code we can't
see how this could be either a deadlock or an infinite loop. Maybe you can make
some more out of the printout?
For example, we wonder what the timestamp row means. Almost all threads have a
timestamp of around 2200. But one thread has 1 and the other 346. What does this
mean?
We are using the following version of JRockit:
java version 1.3
Java(TM) 2 Runtime Environment, Standard Edition (build "1.3.1_CROSIS_20011213-1316")
JRockit Virtual Machine (build 3.0.1-CROSIS-2001213-1317)
with nativeThreads activated.
Do you know of any troubles with using RMI for this version. Or the combination
of RMI and CORBA/OrbixWeb?
Best regards,
Tomas L
[ProblemReport_JRockit.txt]Really don't know the answer to that question. I haven't analyzed the
problem in detail. I know that a lot of issues has been fixed since
3.0.1, and if the problem is with the VM it is likely to have been fixed.
Regards,
/Staffan
TomasLiden wrote:
Alright,
However, before taking on the job of upgrading JRockit it would be nice to know
whether the problem is likely to be solved. Or put in other words: Do you think
the problem is in the JVM or in our application?
All the best,
/Tomas
Staffan Larsen <[email protected]> wrote:
Well, as you noted, NT4 isn't a supported platform for 7.0sp4, but we
are not aware of anything that would not work. Then again, 3.0.1 isn't
supported either...
You have two choices the way I see it: 1) Use 7.0sp4 on NT4 and
hopefully it solves your problem. 2) Upgrade to W2K (but I guess that
is
hard).
Regards,
/Staffan
TomasLiden wrote:
Hi,
I guessed you would answer something like that ;-) However, our serveris running
Windows NT4 (don't remember the service pack) and on your downloadsite it says
W2K for 7.0sp4. Will that work?
/T
Staffan Larsen <[email protected]> wrote:
Hi Tomas,
JRockit 3.0.1 is pretty old at this time, so I would strongly suggest
that you upgrade to JRockit 7.0sp4 (if you need 1.3.1 compatibility),
or
JRockit 1.4.2 (if you are ok with 1.4.2 compatibility). Both version
are
available for download at
http://commerce.bea.com/showallversions.jsp?family=WLJR
Regards,
/Staffan
TomasLiden wrote:
We have during the last month started to get problems where the Vadisapplication
stops working. We can't figure out the cause of this.
Recent additions to the application is that we have started to useRMI for our
client communication - currently we are both using CORBA (OrbixWeb3.1c) and RMI
- planning to get rid of CORBA. We have also some new features thatincreases
the amount of tasks to perform.
The system can hang both under heavy load and under off peak hours,when many
clients are connected or when nobody is using it!?! Strange...
This happens approximately once a week.
Today we managed to get a JRockit dump (with Ctrl-Break) - see attachedfile.
The main thread that should run all real tasks is Schemaläggare, butthe stack
trace indicates a really weird place to stop. When looking at the
code
we can't
see how this could be either a deadlock or an infinite loop. Maybeyou can make
some more out of the printout?
For example, we wonder what the timestamp row means. Almost all threadshave a
timestamp of around 2200. But one thread has 1 and the other 346.
What
does this
mean?
We are using the following version of JRockit:
java version 1.3
Java(TM) 2 Runtime Environment, Standard Edition (build "1.3.1_CROSIS_20011213-1316")
JRockit Virtual Machine (build 3.0.1-CROSIS-2001213-1317)
with nativeThreads activated.
Do you know of any troubles with using RMI for this version. Or thecombination
of RMI and CORBA/OrbixWeb?
Best regards,
Tomas L
Problem report.
Application hangs - deadlock or loop?
We have during the last month started to get problems where the Vadisapplication stops working. We can't figure out the cause of this.
Recent additions to the application is that we have started to useRMI for our client communication - currently we are both using CORBA
(OrbixWeb 3.1c) and RMI - planning to get rid of CORBA. We have also
some new features that increases the amount of tasks to perform.
The system can hang both under heavy load and under off peak hours,when many clients are connected or when nobody is using it!?! Strange...
This happens approximately once a week.
Today we managed to get a JRockit dump (with Ctrl-Break) - see below.The main thread that should run all real tasks is Schemaläggare, but
the stack trace indicates a really weird place to stop. When looking
at the code we can't see how this could be either a deadlock or aninfinite
loop. Maybe you can make some more out of the printout?
For example, we wonder what the timestamp row means. Almost all threadshave a timestamp of around 2200. But one thread has 1 and the other
346. What does this mean?
We are using the following version of JRockit:
java version 1.3
Java(TM) 2 Runtime Environment, Standard Edition (build "1.3.1_CROSIS_20011213-1316")
JRockit Virtual Machine (build 3.0.1-CROSIS-2001213-1317)
with nativeThreads activated.
Do you know of any troubles with using RMI for this version. Or thecombination of RMI and CORBA/OrbixWeb?
Best regards,
Tomas L
================== Ctrl-Break printout ====================
====== THREAD 00000080 == Noname
State: ACTIVE, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2232 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FF8FF08
ThreadID: 0x00000E7B
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000100 == RMI TCP Connection(2191)-10.40.105.193
State: ACTIVE, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 1 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FF4FC44
ThreadID: 0x000006F4
### Stacktrace:
at se.sj.otm.tillampning.systemProvider.gen.RVadisClientProviderImpl.doT
illgangligaVagnar(Compiled Code)@5f5f4fee
at se.sj.otm.tillampning.systemProvider.gen.RVadisClientProviderImpl_Ske
l.dispatch(Compiled Code)@5f5f5ad1
at sun.rmi.server.UnicastServerRef.oldDispatch(Compiled Code)@5d32d44c
at sun.rmi.server.UnicastServerRef.dispatch(Compiled Code)@5d32cfc8
at sun.rmi.transport.Transport$1.run(Compiled Code)@5d32cb3f
at java.security.AccessController.doPrivileged(Native Method)@5a091990
at sun.rmi.transport.Transport.serviceCall(Compiled Code)@5d32b02d
at sun.rmi.transport.tcp.TCPTransport.handleMessages(CompiledCode)@5d32
a9c8
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(CompiledCod
e)@5d3296db
at java.lang.Thread.run(Compiled Code)@59e3328e
at java.lang.Thread.startThreadFromVM(Compiled Code)@59e33134
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000180 == ObjyThread
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2226 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FF3FED8
ThreadID: 0x00000B2F
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000200 == Finalizer
State: WAITING, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2231 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FF2FEB8
ThreadID: 0x00000B7A
### Stacktrace:
at java.lang.Object.wait0(Compiled Code)@59e35860
at java.lang.ref.ReferenceQueue.remove(Optimized Code)@5f7742fe
at java.lang.ref.Finalizer$FinalizerThread.run(Compiled Code)@59e35379
at java.lang.Thread.startThreadFromVM(Compiled Code)@59e33134
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000280 == SignalHandler
State: ACTIVE, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2230 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FEFFEF0
ThreadID: 0x00000B3C
### Stacktrace:
at java.lang.Thread.run(Compiled Code)@59e3328e
at java.lang.Thread.startThreadFromVM(Compiled Code)@59e33134
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000300 == Hotspot Detector
State: ACTIVE, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2229 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FEEFEE0
ThreadID: 0x0000096C
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000380 == Reference Handler
State: WAITING, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2228 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FEDFEE4
ThreadID: 0x00000E30
### Stacktrace:
at java.lang.ref.Reference$ReferenceHandler.run(Compiled Code)@5a090526
at java.lang.Thread.startThreadFromVM(Compiled Code)@59e33134
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000400 == Thread-0
State: ACTIVE, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2232 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x00A5B1E0
ThreadID: 0x00000D2A
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000480 == RMI TCP Accept-1
State: ACTIVE, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2225 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FE8FEA4
ThreadID: 0x00000EA0
### Stacktrace:
at java.net.ServerSocket.implAccept(Compiled Code)@5a23b775
at java.net.ServerSocket.accept(Compiled Code)@5a23b57c
at sun.rmi.transport.tcp.TCPTransport.run(Compiled Code)@5a23a9f8
at java.lang.Thread.run(Compiled Code)@59e3328e
at java.lang.Thread.startThreadFromVM(Compiled Code)@59e33134
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000500 == OrbixWeb Server Listener thread
State: ACTIVE, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2224 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FE7FEA0
ThreadID: 0x0000008E
### Stacktrace:
at java.net.ServerSocket.implAccept(Compiled Code)@5a23b775
at java.net.ServerSocket.accept(Compiled Code)@5a23b57c
at IE.Iona.OrbixWeb.CORBA.Listener.acceptNewConnection(CompiledCode)@5a
2f429e
at IE.Iona.OrbixWeb.CORBA.Listener.run(Compiled Code)@5a2f3e37
at java.lang.Thread.run(Compiled Code)@59e3328e
at java.lang.Thread.startThreadFromVM(Compiled Code)@59e33134
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000580 == Request Processor
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2223 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FE6FEA0
ThreadID: 0x00000E0E
### Stacktrace:
at IE.Iona.OrbixWeb.CORBA.EventHandler.nextRequest(CompiledCode)@5a2f78
fc
at IE.Iona.OrbixWeb.CORBA.BOAImpl.processOneEvent(CompiledCode)@5a2f763
b
at IE.Iona.OrbixWeb.CORBA.BOAImpl.processEvents(Compiled Code)@5a2f418b
at IE.Iona.OrbixWeb.CORBA.EventHandler.run(Compiled Code)@5a2f3c8d
at java.lang.Thread.run(Compiled Code)@59e3328e
at java.lang.Thread.startThreadFromVM(Compiled Code)@59e33134
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000600 == RMI TCP Accept-2
State: ACTIVE, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2222 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FE5FEA4
ThreadID: 0x00000680
### Stacktrace:
at java.net.ServerSocket.implAccept(Compiled Code)@5a23b775
at java.net.ServerSocket.accept(Compiled Code)@5a23b57c
at sun.rmi.transport.tcp.TCPTransport.run(Compiled Code)@5a23a9f8
at java.lang.Thread.run(Compiled Code)@59e3328e
at java.lang.Thread.startThreadFromVM(Compiled Code)@59e33134
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000680 == RMI Reaper
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2221 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FE4FEA0
ThreadID: 0x000008FB
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000700 == GC Daemon
State: WAITING, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2220 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FE3FEC4
ThreadID: 0x00000927
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000780 == Thread-11
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2213 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FE2FEC8
ThreadID: 0x00000CF1
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000800 == Gtpl
State: ACTIVE, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2204 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FE1FDC8
ThreadID: 0x00000B01
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000880 == Pbok
State: ACTIVE, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2203 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FE0FDC8
ThreadID: 0x00000A27
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000900 == Beval
State: ACTIVE, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2202 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FDFFDC8
ThreadID: 0x00000C27
### Stacktrace:
at java.net.SocketInputStream.read0(Optimized Code)@5f776df9
at java.net.SocketInputStream.read(Optimized Code)@5f776e42
at java.io.DataInputStream.readInt(Optimized Code)@5f58a2df
at com.ibm.mq.MQInternalCommunications.receive(Optimized Code)@5f762c43
at com.ibm.mq.MQSESSIONClient.MQGET(Optimized Code)@5f74a056
at com.ibm.mq.MQQueue.get(Optimized Code)@5f76e931
at se.sj.otm.ramverk.hostConnection.communication.MQPoll.execute(Optimiz
ed Code)@5f8fc96f
at se.sj.otm.basobjekt.Poll.run(Compiled Code)@5a35db6f
at java.lang.Thread.startThreadFromVM(Compiled Code)@59e33134
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000980 == Kal
State: ACTIVE, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2201 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FDEFDC8
ThreadID: 0x0000064A
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000a00 == OrbixWeb Connection Monitor thread
State: WAITING, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2218 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FDDFEC8
ThreadID: 0x00000968
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000a80 == Connection[IIOP, Socket[addr=nttmd51.sj.se/10.54.132.9
5,port=1574,localport=1977], is_daemon]
State: ACTIVE, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2217 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FDCFEA4
ThreadID: 0x000007AA
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000b80 == Thread-9
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2215 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FDAFEC8
ThreadID: 0x00000F58
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000c00 == Thread-10
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2214 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FD9FEC8
ThreadID: 0x00000302
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000c80 == Thread-12
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2212 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FD8FEC8
ThreadID: 0x00000D52
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000d00 == Thread-13
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2211 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FD7FEC8
ThreadID: 0x00000ABC
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000d80 == Thread-14
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2210 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FD6FEC8
ThreadID: 0x000008F5
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000e00 == Thread-15
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2209 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FD5FEC8
ThreadID: 0x000001C2
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000e80 == Thread-16
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2208 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FD4FEC8
ThreadID: 0x0000078E
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000f00 == Schemalõggare
State: ACTIVE, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2207 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FD3FA0C
ThreadID: 0x00000AC0
### Stacktrace:
at se.sj.otm.vagnstyrningsplanering.optimeringsmodell.AggregeradTomvagns
fordelningsmodell.minskaReservationerUtanBehovspaverkan(Compiled Code)@5f5e6678
at se.sj.otm.vagnstyrningsplanering.optimeringsmodell.AggregeradTomvagns
fordelningsmodell.anpassaReservationerTillKapacitetsminskning(CompiledCode)@5f5
e6945
at se.sj.otm.vagnstyrningsplanering.tomvagnstyrning.impl.Godsvagnstyrnin
gsplanImpl.forandradTillgangligKapacitetITaglagen(Compiled Code)@5d33750a
at java.lang.reflect.Method.invoke(Native Method)@5a0c225e
at se.sj.otm.verksamhetsobjekt.trafikoperator.impl.ArgumentFormedlareImp
l.invokeMethod(Compiled Code)@5a5f545e
at se.sj.otm.vagnstyrningsplanering.tomvagnstyrning.impl.Godsvagnstyrnin
gsplanImpl.anropaVagnstyrningsplanerare(Optimized Code)@5f8fdba5
at se.sj.otm.verksamhetsobjekt.fordon.impl.GodsvagnparkImpl.anropaVagnst
yrningsplanerare(Compiled Code)@5a5f511f
at se.sj.otm.verksamhetsobjekt.fordon.impl.GodsvagnparkImpl.forandradTil
lgangligKapacitetITaglagen(Compiled Code)@5d337101
at se.sj.otm.verksamhetsobjekt.fordon.impl.GodsvagnparkImpl.genomforRese
rvationslistor(Optimized Code)@5f8fee98
at se.sj.otm.verksamhetsobjekt.fordon.impl.GodsvagnparkImpl.genomforOnsk
adeReservationer(Optimized Code)@5f7a4c4a
at se.sj.otm.verksamhetsobjekt.fordon.impl.GodsvagnparkImpl.hanteraSvarF
ranPlaneraren(Compiled Code)@5d330a01
at se.sj.otm.verksamhetsobjekt.fordon.impl.GodsvagnparkImpl.forberedFixe
raTomtransporter(Optimized Code)@5f799aab
at se.sj.otm.verksamhetsobjekt.fordon.impl.GodsvagnparkImpl.fixeraTomtra
nsporter(Compiled Code)@5f5c81d1
at se.sj.otm.verksamhetsobjekt.tidtabell.impl.TidtabellImpl.utforFortida
Fixering(Compiled Code)@5f74b166
at java.lang.reflect.Method.invoke(Native Method)@5a0c225e
at se.sj.otm.ramverk.scheduler.OTAssignment.perform(OptimizedCode)@5f76
b227
at se.sj.otm.ramverk.scheduler.OTScheduler.performNextAssignment(Optimiz
ed Code)@5f900796
at se.sj.otm.ramverk.scheduler.OTScheduler.execute(OptimizedCode)@5f904
b9d
at se.sj.otm.basobjekt.Poll.run(Compiled Code)@5a35db6f
at java.lang.Thread.startThreadFromVM(Compiled Code)@59e33134
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00000f80 == TidsstyrdUppdragsk÷
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2206 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FD2FEC0
ThreadID: 0x00000B34
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00001000 == TidsstyrdUppdragsk÷
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2205 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FD1FEC0
ThreadID: 0x00000AC2
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00001080 == AWT-EventQueue-0
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2200 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FD0FEA0
ThreadID: 0x000001B1
### Stacktrace:
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00001100 == SunToolkit.PostEventQueue-0
State: WAITING, NONDAEMON, GCABLE
Prio: 0 (5)
Timestamp: 2199 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FCFFED4
ThreadID: 0x00000E2E
### Stacktrace:
at sun.awt.PostEventQueue.run(Compiled Code)@5a3bde4e
at java.lang.Thread.startThreadFromVM(Compiled Code)@59e33134
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00001180 == Thread-20
State: CREATED, DAEMON, GCABLE
Prio: 0 (6)
Timestamp: 2232 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FCEFF58
ThreadID: 0x000000A2
### Stacktrace:
No stack trace for unstarted threads.
### End of stacktrace.
=====================
====== THREAD 00001200 == AWT-Windows
State: ACTIVE, DAEMON, GCABLE
Prio: 0 (6)
Timestamp: 2197 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FCDFEBC
ThreadID: 0x00000D0A
### Stacktrace:
at COM.jrockit.awt.WToolkit.run(Compiled Code)@5a3bdfe9
at java.lang.Thread.run(Compiled Code)@59e3328e
at java.lang.Thread.startThreadFromVM(Compiled Code)@59e33134
--- End of stack trace
### End of stacktrace.
=====================
====== THREAD 00001280 == RMI LeaseChecker
State: WAITING, DAEMON, GCABLE
Prio: 0 (5)
Timestamp: 346 before current stamp
Stack: 0x00000000
Code: 0x00000000
LastJava: 0x7FCCFEBC
ThreadID: 0x000007C0
### Stacktrace:
--- End of stack trace
### End of stacktrace.
===================== -
I'm having trouble with a multi channel acquisition and download with PXI-5922
I am having trouble with getting data out from both channels of a PXI-5922. My software seems to be working, but when I do the fetch there is no data for the second channel. I am using the same format for all of the channelList inputs (0,1). I've checked the instrument handles and anything else I can think of, but this is my first time trying to collect data on 2 channels of a digitizer. Any help would be appreciated.
Hi schliepe,
Try checking your code against an existing example. The
Developer Zone Example: Independent
Channel Configuration with NI-SCOPE is a good VI to reference. Also note
that there are several examples that come with the NI-SCOPE driver. They can be
found in Windows by going to Start »
Programs » National Instruments » NI SCOPE » Examples. Additionally, if you find that the examples are not working either, verify that both channels are functioning by running the
NI-SCOPE Soft Front Panel.
Please post back if you have any questions. Have a great
day!
Ryan D.
District Sales Manager for Boston & Northern New England
National Instruments -
Trouble with array to spreadsheet string
I am having trouble with the array to spreadsheet string.
I have a 1-d array of string, the output spreadsheet string never puts a space on the first row, but all others.
example:
05:59:29.170 00000101 8 00 00 07 00 0B 0E 0D 0C
05:59:29.198 00000100 8 00 00 3A 3A 39 39 39 39
05:59:29.220 00000101 8 00 00 07 00 0B 0E 0D 0C
05:59:29.248 00000100 8 00 00 39 39 39 39 39 39
format string is %s and default tab is delimiter.
this is screwing up my program because of the "scan for string" function can't be used correctly if the spreadsheet string isnt consistent.
Any suggestions?
ThanksYou don't need to use "array to spreadheet string": You could use plain formatting for full control over the output.
Still, your observation is a bit odd. Could you attach a simple VI that shows the behavior? (Put your input array into a diagram constant).
LabVIEW Champion . Do more with less code and in less time . -
Problem with running example 'Generating Live Audio/Video Data'
Hello,
Concerning the example 'Generating Live Audio/Video Data', I'm having trouble with the run instructions.
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/LiveData.html
How does JMFRegistry know about the location of jmfsample?
How is 'live' resolved as a URL?
2.Register the package prefix for the new data source using JMFRegistry
- Run JMFRegistry
- In the Protocol Prefix List section add "jmfsample" and hit Commit.
4.Select File->Open URL and enter "live:"
Much thanks,
BenI'm getting the following error message: "Could not create player for live"Implies you've either not registered the "live:" protocol prefix in the JMF Registry, or, it couldn't load the class you registered for it...or it might be erroring out inside the actual live protocol, I'm not sure what that would look like, but a System.err.println statement in the constructor of both of those classes might be a good idea.
I added the output of javac (DataSource.class and LiveStream.class) to a directory on the classpath.
C:\Program Files\JMF2.1.1e\lib\jmfsample\media\protocol\liveEh, that looks a little questionable to me. I'm not 100% sure that the JRE will automaticlly descend into the package subdirectories like that, looking for classfiles, for every folder on the path. I am, of course, fully open to the idea that it does and I just never thought about it...but I guess I just thought it only did that for JAR files, not CLASS files. Regardless, I'd recommend:
1) Make sure you've registered the protocol prefix "live:" correctly in JMF Registry
2) Try to run it with the 2 compiled class files in the same folder as your project
3) Try to run it with the 2 compiled class files in the lib directory, if that's on the classpath
4) Try to run it with the 2 compiled class files installed in the JRE as an extension (google for how to do this because I don't remember off the top of my head)
5) Reinstall JMF and see if that helps
Maybe you are looking for
-
Sent messages disappeared in Apple Mail
Hello everybody, I use Apple Mail (v. 3.6) with Mac OS X (Version 10.5.8) for my Google Domains email addresses. Yesterday, all the sent messages suddenly disappeared from my Inbox in Apple Mail on the Mac (only for one account, although I run 6 acco
-
Itunes only plays one song at the time
My Itunes plays only one song at the time. If I try to play the next one by pressing the "forward" button Itunes stops playing. What now???? Geertvun
-
Error while installing oracle 10g on centos 5.6 32 Bit
Hi All, Please help me with the issue I facing while installing oracle 10g on centos 5.6 32bit. I did lot of research on google but I am getting same answer...the libXp package is missing, but I have check it...its already installed. [root@staging ~]
-
Package Application Incident Tracking Apex 4.2 Internet Explorer Issue
Frame Layout Question. I have installed the packaged application Incident Tracking, however the rendering of the Content Frame Body Container region in Internet Explorer 8.0 and above does not render correctly. Both the width and the height of thi
-
Error "EXPORT_INCONSISTENT_STRUCTURE" IN PR (ME52N)
Hello Friends, I am getting runtime error EXPORT_INCONSISTENT_STRUCTURE while saving Purchase requisition(PR). Below is the details displayed in runtime time error description. short text: INTERNAL ERROR:INVALID STRUCTURE DESCRIPTION ERROR ANALYSIS: