Trouble with Time Machine (runs constantly). Erase and install?

Trouble with Time Machine (runs constantly). Tried re-installation (equivalent of archive install) of Snow Leopard. Time Machine still unable to complete a back-up. Erase and install recommended at Genius Bar. Have backed up data to external HD using Super Duper. Should be a bootable backup. Last successful backup through Time Machine was 6/1/11. Not sure if I can access this back-up if I erase and re-install.
Computer shipped with Tiger (7/2007). Have original disks. Now running Snow Leopard. So: erase HD, install Tiger, then update to Snow Leopard? Start-up from Tiger disks does not appear to work (starting up holding "C" key). Suggestions? Want very much to transfer data to new iMac, but do not want to carry bugs forward. Very nervous about erasing HD. And have the questions above about reinstalling system software.
Advice desired! Thanks.

Well if you can hold option and boot off the Superdupes clone and it works fine then you should be set to do what you need to do to the original boot drive.
Disconnect all drives and c boot off the Snow Leopard install disk, use Disk Utility to Erase > format HFS+ journaled your internal boot drive.
Quit and reinstall OS X Snow Leopard, setup (do not use Setup/Migration Assitant!) and update to 10.6.8
When you setup the new install, use the same hard drive name and user name as you did before.
Now the free iLife that came on the Tiger disks you won't get naturally, but you can pick them off the disk with the shareware program called Pacifist.
install your programs from fresh sources, this way you don't get the "crap" from the older setup.
Once your machine is up and going. Hook up the clone and transfer your user folders over manually. With iTunes just replace the whole folder. Because you kept the same user and boot drive name as before, the playlists should be fine.
Once your all peachy, take the opportunity to clone this new setup to a external drive, label and disconnect.
Make another clone for day to day, or week to week clone updates and your just a hold option boot away for recovery.
You know Superdupes and Carbon Copy Cloner both have auto-scedualing/updating ability, so you can leave them plugged in and it will perform a update so your clone stays fresh and recent.
But you should keep a clone timed back about a couple of weeks back just in case you install something bad and don't learn about it right away.

Similar Messages

Can't access Time Machine backups after erase and install

Had iMac checked by Apple Authorized Service Provider after experiencing multiple problems I couldn't fix. No hardware problem. He did an erase and install of 10.5.8. The machine accesses my Time Machine backup, but in Time Machine/ iMacHome/ Sharing & Permissions says, "You can only read." If I access a folder in Home, like Desktop or Documents, it says,"You have no access." Permissions are locked and grayed out.
I spent over two hours on the phone with tech support last evening, and he finally said he'd have to turn it over to Apple engineers, which would take a few days.
Migration assistant only allows "all or nothing" migration, and I need to select just certain folders; I do not want to restore anything that might be corrupted.
Is it possible I could have an undetected hardware problem? Has anyone else done an erase and install and been able to use Time Machine backups to pick and choose what they wanted to restore?

Thank you for your reply. The apple support tech should have known this, but he didn't. However, in the course of our two hour discussion he said "Maybe it's because the computer name is different." I hadn't reached the new-set-up stage where I had changed the name of the computer from Apple's default, so I did that. My short name home folder I had already named the same as before, iMacHome.
But changing the computer name didn't help. After reading your reply, I unlocked the preferences (which were locked and grayed out in TM) to my home folder in the finder and assigned read and write to all folders within for everyone. Back in TM, preferences were no longer grayed out, but changing privileges was. I added iMacHome to the names in addition to staff read & write and everyone read and write. But ImacHome(Me) allows read only, options gray, and even though everyone is read and write, it says "You can only read" and I still cannot access Desktop, Documents, etc...
Fortunately I have a SuperDuper user file backup that I am restoring from, so all is not lost. But it seems to me TM backups should be readily available, and I want to solve this problem. I may still want to go back to a previous month to recover something. But mostly I'd just like to know that TM is a functional backup. It certainly isn't in my case right now.
Don't want to migrate the entire home folder. Too risky. Risky enough to bring over Mail and selected Application Support folders and keychains.
Thanks again. I think your answer is right on, but there must still be something else. I know I have those names correct because I see the old computer name on the sparse bundle, and the old home name in the TM backups. (Haven't read the tips yet. Will do so.)

Trouble with Time Machine/Time Capsule try Backup instead

Trouble with Time Machine preparing to download taking hogging your system followed by errors that don't make any sense even if you look at the console logs to try to figure out. Try Backup instead.
Find the software here:
http://www.apple.com/downloads/macosx/apple/application_updates/backup312.html
It allows you to configure when to do back ups and specific data you want, and includes templates for configurations to make it easy. The only catch is you loose the Time Machine benefits of restoring an individual file easily. For me it gets around the issues w/ Time Machine hogging my system resources (Finder at 98% CPU cycles both cores) while "preparing backup", followed by strange failures that can't figure out, followed by more "preparing backup".

I was running backup instead of time machine until I saw snow leopard had time machine improvements. I'm very happy with the performance so far w/ snow leopard (OS X 10.6) time machine performance.

Trouble with time machine

I am having trouble with Time Machine. I keep getting several messages: 1. Mac OS X can't repair the disk "Mona's I MAC" 2. You haven't selected a location for Time Machine Backups.
When I try to select a location there is nothing there to select and the time machine will not stay on. I have an external back up "my passport" by WD. Could this be full?
Need help.

I was running backup instead of time machine until I saw snow leopard had time machine improvements. I'm very happy with the performance so far w/ snow leopard (OS X 10.6) time machine performance.

When I back up on my exertnal HD drive with time machine can I erase what on my computer HD for more space?

When I back up files on my exertnal HD drive with time machine can I erase what's on my Mac HD for space without losing what's on external HD?

If the data is valuable to you, redundant backups are essential. Time Machine is an excellent vehicle when you have to restore data that no longer exists on your internal HDD.
Mende1's suggestion of using Carbon Copy Cloner is excellent because it gives yous a HDD that is 'ready to go' should your internal HDD fail (as all HDDs eventually will).
For example, I have 5 copies of my iTunes folder, one each on three MBPs, on a HDD devoted strictly to iTunes and Time Machine (this does not include the iPod). One may view this as excessive but since I have over 100 GB in this application, I am very comfortable with this.
I advocate that the best backup strategy is Time machine combined with a boot HDD and a third HDD for the most important user data. If there is non essential data, the you may certainly compromise and use just Time Machine.
Ciao.

I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

I try to backup my Macbook with Time machine, it goes fine and at the end it says that it could not be completed because "/Volumes/Data-2/ MacBook.sparsebundle is already in use".. What is that?!

See #C12 in Time Machine - Troubleshooting

Problem with Time Machine, running Snow Leopard

Hi all,
Last week I had a new hard drive fitted into my iMac 8,1, after which Snow Leopard was reloaded (10.6.3 from the disc, updated to 10.6.8), followed by the restoration of data via Time Machine from my external hard drive. Whilst my Mac is now running beautifully, I am having problems backing up with Time Machine.
When I run a backup, it prepares about 100,000 items, then starts to backup, usually about 650mb. It crawls along in kb until it gets to about 1mb, then jumps quickly to the end, but then it adds extra mb on the end. Then it suddenly starts again "preparing x items....." and off it goes again.
I have tried repairing the backup disc, and it appears to be ok. I even erased it and started again. Time Machine did a full backup (139gb) in about 2 hours, then immediately added another 640mb at the end - strange, but I do at least have a full backup from yesterday. But now, everytime I run backup, it looks for the same sort of figure (650-700mb) and then goes round in circles.
Any help would be very much appreciated!
Thanks, David

Hi Eric
Thank you for your reply. Here are the screenshots for each change:
Having prepared about 95,000 items, the backup of 612mb begins
14 minutes later a message appears
Another 3 minutes and another message. You will see from this screenshot that the backup figure has changed to 613.1mb
Another 30 seconds and it all begins again....
And finally, 7 more minutes pass, another 96,000 items are prepared, and another 604.8mb backup begins.
I might add, that between posting this morning, and your reply, I also went into disk utility, chose the top leve of the external drive, clicked on the partition tab, charged current to 1 partition, renamed the drive, erased it, and did a full back up of 139GB. After 137GB it started again, looked for 602mb, backed them up and finished the backup, which is why TM states that the last back up was at 18:16 today.
Thanks again
David

Serious issues with iMac, black screen during erase and install-PLEASE HELP

My sister's Intel iMac G5 seriously has been a lemon, it has had SO many issues. It's now 2 years old, and has been rather slow for the maybe the last year, but over the last month or so it has gone way downhill, and it literally takes an hour to boot up, and 4-5 minutes to do anything (open an application, look at a photo in iPhoto, etc.). So, we've been trying to "erase and install" with her install discs to hopefully give the computer a clean boot and see if it helps at all. She has already backed everything up.
She started the erase and install last night, and it was going ridiculously slow. This morning when she woke up, the blue progress bar had gone about half way across. Then she went to get her kids ready, and when she came back in it looked like the computer was rebooting itself (gray screen with apple), but then the screen turned black and she can't do anything on it. Has anyone seen anything similar to this before?
We have had so much trouble getting this to work (we tried an archive and install a few days ago, but it gave her an error at the end). For about a day we couldn't even get the computer to boot up at all, but then miraculously yesterday morning it booted! Please help, I've converted her to Macs but if I can't get hers fixed she may never get one again!!

I'm afraid that it's a contradiction in terms to talk about an intel iMac G5. What your sister has is an intel machine, and she will find good advice by posting to the [intel iMac Forum|http://discussions.apple.com/forum.jspa?forumID=1110].

Errors with Time Machine (not completing backup, and needing to erase the ".inProgress" package)

I have in a previous discussion been talking about errors with my Time Machine backup. The errors were with a problem with Indexing a file, it fails and stops the whole backup. Each time it attemps another backup, it fills my ".inProgress" package with a (nearly) whole backup, filling my Time Machine hard drive, and thus errasing my previous good backups. The error occurs after about 95% completion.
In my last post of a similar disscussion, the problem was indexing the Preference Pane files and this caused the whole backup to fail. This was my last post there: (below in some additional info of my situation)
I did exclude the MobileMe.prefPane. And I got:
12/16/11 9:24:50.468 PM com.apple.backupd: Starting standard backup
12/16/11 9:24:50.556 PM com.apple.backupd: Backing up to: /Volumes/3 TB GoFlex Drive/Backups.backupdb
12/16/11 9:25:14.418 PM com.apple.backupd: Waiting for index to be ready (101)
12/16/11 9:27:02.366 PM com.apple.backupd: Deep event scan at path:/ reason:must scan subdirs|
12/16/11 9:27:02.366 PM com.apple.backupd: Finished scan
12/16/11 9:33:37.119 PM com.apple.backupd: Deep event scan at path:/Volumes/Mac OS Lion GM reason:must scan subdirs|
12/16/11 9:33:37.119 PM com.apple.backupd: Finished scan
12/16/11 9:36:15.650 PM com.apple.backupd: 758.92 GB required (including padding), 830.32 GB available
12/16/11 10:25:14.873 PM com.apple.backupd: Copied 22.8 GB of 630.5 GB, 782749 of 2357620 items
12/16/11 11:25:15.335 PM com.apple.backupd: Copied 86.6 GB of 630.5 GB, 1167675 of 2357620 items
12/17/11 12:25:16.227 AM com.apple.backupd: Copied 152.2 GB of 630.5 GB, 1393795 of 2357620 items
Dec 17 01:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 305.2 GB of 630.5 GB, 1413946 of 2357620 items
Dec 17 02:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 457.1 GB of 630.5 GB, 1419190 of 2357620 items
Dec 17 03:19:07 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 1736865 files (568.3 GB) from volume Macintosh HD.
Dec 17 03:25:16 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 572.1 GB of 630.5 GB, 1848939 of 2357620 items
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Indexing a file failed. Returned 200 for: /Volumes/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane, /Volumes/3 TB GoFlex Drive/Backups.backupdb/Tom iMac/2011-12-14-171406.inProgress/7DB524DD-EFB9-42A6-8A21-0A2A312EDA6D/Mac OS Lion GM/System/Library/PreferencePanes/Mouse.prefPane
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Aborting backup because indexing a file failed.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Stopping backup.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copied 2164998 files (581.1 GB) from volume Mac OS Lion GM.
Dec 17 03:40:33 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Copy stage failed with error:11
Dec 17 03:40:50 Thomas-P-Kellys-iMac com.apple.backupd[99858]: Backup failed with error: 11
This time it was the Mouse.prefPane that caused the error. I'd like to exclude the entire PreferencePanes directory.
This was my error message this time:
I just realized this was on my small Developers partition. Perhaps there is an error with the build, OR an error with the initial restore. I'd like to perhaps exclude the entire /Volumes/Mac OS Lion GM. I expect that Time Machine is working fine with my main partition and the error happens when it's almost done with the Mac OS Lion GM partition.
The problem now is that I only have 265 GB of 3 TB available on my Time Machine HDD. If attempt another backup, it'll surely erase about 410 GB of my past saved backups. I've already lost 6 months, and I only have two months left of backups. I need to erase the ".inProgress" package again. That'll take time, and it's impossible to do from this main partition, even at root access. This ".inProgress" has a total of two (nearly) full backups; it didn't cleanup the first full backup attempt while starting the second,perhaps it would have had it finished. But I fear even if I exclude the whole "Mac OS Lion GM" partition, It'll create a third full backup before cleanup and erase ~400 GB of previous good backups. Then, I'll have a total of 4 (nearly) full backups! 3 TB is just enough without any past backups.
Maybe I'll just copy my documentations of my 'errasing the ".inProgress" package' last time (from the Mac OS Lion GM partition) and do a full restore of just that partition. Thus erasing the errors all together. If it doesn't fix the errors then this could be a bug in the build that doesn't allow Time Machine to work. I've always included this partition in Time Machine before, even with other Lion builds, so I suspect that it was an error in the initial restore. (I may be answering my own questions, and that the inital restore (of the small partition) is the problem, and I just need to re-restore the small partition)
Again, I'm going to have to erase the ".inProgress" file to regain 1.53 TB of space before proceeding.
Also, I gave myself permission to read the ".Backup.345781513.887697.log", the log that was created last night when I first started Time Machine this last time. It was interesting, but didn't show the error I could see from the console.
Right now, mds and mdworker appear to be going crazy even after I just now turned off Time Machine. I think I'll let it go for the rest of the night. Then I'll work on erasing the ".inProgress" package from the other partition boot up.
That was my entire last post. To add some information, I have two OS X partitons, both Mac OS X Lion. One is my large main partition, the other is one I don't mind testing with. I recently replaced my internal hard drive in my iMac and restored from Time Machine both partitions. This appeared to go smoothly. But I have yet to create a single successful Time Machine backup since. At first it was doing a Full Backup, which I didn't like, but now it just aborts around 95% completion. Each, time, it tries it fills the Time Machine hard drive with duplicate (nearly) full backups errasing my older good backups. I would like to erase the ".inProgress" file to save space.
My main question in this new discussion is does anyone know of a good way of erasing the ".inProgress" file? This is so I can preseerve my previous backups. ACLs and other permissions seem to make it impossible to erase from this startup partition, the one I'm running Time Machine from. Even at root level, if I give myself permission to change permissions or delete a file, it'll say Operation not Permitted instead of Permission Denied. I have been able to delete this ".inProgress" package before when booting from the other partition, but with great difficulty. I have had much help from another Member in this Support Community when it comes to solving my Time Machine problems. I think I have found the problem (indexing files in my small OS X partition), as stated in my copy& pasted post above, but I really need to delete this inProgress package first to save space before continuing!

Pondini wrote:
Gator TPK wrote:
Now I'll have to fix the small partition? How's the best way to do this? There could be thousands of files that won't index fine.
See if there's anything you haven't done, that applies, in the pink box of #C3 in Time Machine - Troubleshooting
Otherwise, since most (or all?) of the indexing errors are in OSX, you might want to just reinstall it. Something may have gone wrong sometime, that damaged those files.
I reviewed #C3 in Time Machine - Troubleshooting and I have already done most of those things. I have just learned something new though:
When I included my Main OS X partition again, I got an indexing error for the first time for that partition. I might be interesting to note that the _spotlight process was running, and it's running again (the magnifying glass has a dot and it generically says "Indexing Tom's iMac"). mdworker, mds and backupd processes really are working hard, one moment they used over 500% of my CPU. It's nice to know for once quad core is good for something other than video encoding. (Now if they could just get the Finder to do more than 100.1%, only 1 thread is doing 100%, I'd like to see file size calculations 8 times quicker!)
I never got an indexing error once in the past 2 weeks for that large Mac OS X v10.7.2 main volume, and it had appeared to finish that partition backup before running into problems with my smaller test partition. Also, I had just updated the smaller test partition with a later build of Mac OS X. But It appears that the beta builds are clearly not the problem. I thought I could just restore again (from the December 4th backup) the small partition and both would be fine.
I'll finish reviewing all the suggestions on Time Machine - Troubleshooting and go from there. Hopefully, the _spotlight indexing simutaniously was the only problem. It's strange that the indexing hasn't happened since the original restore last week untill I finally got a good clean complete partial Time Machine backup. Why would the first Time Machine backup trigger indexing again?
For now, I'm going to exclude the Main Partition again, and let another good backup run. And try your suggestions. (And wait till mds, mdworker, etc. to finish!)
I have the logs of the first two sucsessful backups and the last two failed backups from the last 3 hours, if that would help.?

How should I pick up and go with Time Machine running

I have noticed that since Time Machine backs up my computer often, programs hang up and don't close right away. I'm often on a short window to pack up my machine and go to a meeting. Can I just pull all the plugs out and go? Ejecting the disk seems to take a lot of time when a backup is occuring.
What's the best way to do an immediate disconnect from the external hard drive?

_*Can I just pull all the plugs out and go?*_
And the answer to this would be a resounding... NO !!
As a general rule, you should always eject your drive by dragging it to the trash... and waiting for it to dismount before you disconnect it. Just pulling the cable... especially when the system is in the middle of a back up, WILL result in damaging your backup... making the point of having a back up pretty useless. While it is nice to get back ups every 15 minutes... it can be a hog on resources. You may just want to connect your external drive when you know you'll be in one place for quite a while... or use something like Carbon Copy Cloner (SuperDuper is more popular, but does not yet make bootable backups for machines with Leopard installed) to make backups when you want them.

Anyone having trouble with Time Machine?

Mine will NOT finish any backup so it's constantly running the HD. THe onscreen panel will say
"Backing up 132,386 items" and "492.2 MB of 492.2 MB" and it just keeps thrashing the drive.
For hours, I mean.
I told it to "Stop Backing Up" (on right click popup menu) and then I went into "Time Machine Preferences" and turned it off with the switch and clicked the padlock to lock it in the OFF position, and it's STILL RUNNING.
The only way I can stop it is reboot, cold.

Restart your machine if need be and turn it off. If you don't have any data on the TM disk other than TM, then reformat it (with case sensitivity OFF). If you have data on there, then just trash teh TM backup folder. DOnt' forget to empty trash. Turn TM back on and let it do it's thing. Don't browse the drive to see what it's doing; don't start modifying file sto test it out - just leave it be till it's done.

USB hard drive used with Time Machine runs continually

I have a USB SATA external hard drive that I am using for my Time Machine backups. The drive is configured to run on USB power. The drive begins running as soon as it is connected to the port, and runs continually, as long as it is connected. I expected the drive to sleep between TM backups, to save the moving parts. Is there any way to keep the drive sleeping until a TM backup is done, and then go back to sleep?

Kenneth Mclauchlan wrote:
I have a USB SATA external hard drive that I am using for my Time Machine backups. The drive is configured to run on USB power. The drive begins running as soon as it is connected to the port, and runs continually, as long as it is connected. I expected the drive to sleep between TM backups, to save the moving parts. Is there any way to keep the drive sleeping until a TM backup is done, and then go back to sleep?
I believe that is up to the drive manufacturer. In the Preferences Energy Saver see if you have checked "put drive to sleep when possible" and see if the external drive sleeps when you put the computer to sleep. If it does not then it's not a "sleeper." Even if it does, it may not have an internal clock or switch to sleep after so many minutes of inactivity.
Can you use the drive with external power? See if that does anything.
My LaCie d2 quadro sleeps between backups. I don't use USB, I use FW800.

Unable to restore from Time Machine after an erase and reinstall - MacbookPro cannot access my old Time Machine backup volume. Desperate for help please?

My MacbookPro would not move past the Apple logo and spinning wheel for a number of hours. After trying the numerous suggestions to solve the issue I eventually opted to erase and reinstall feeling confident my Time Machine backups would come to the rescue. After a successful erase and reinstall I tried to restore all my data from my TIme Capsule using Command-R during start up and by using the Migration Assistant. Neither worked and I have received messages to the effect that the backup volumes on my Time Capsule cannot be access because I have entered a wrong password or because the backup volume is damaged.
When I open my Time Capsule in Finder and click on my sparsebundle I get an eror message saying that the disk image could not be opened and that the resource is temporarily unavailable.
Desperate for some help and comfort that many years of personal data have not been lost.
Thank you.
M

When I try to Verify option it says Unable to Verify - Resource temporarily unavailable.
Here is the past of the log screen:
2013-06-09 15:00:00 -0500: Disk Utility started.
2013-06-09 15:09:01 -0500: Disk Utility started.
2013-06-09 15:19:53 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 15:19:53 -0500:
2013-06-09 15:20:00 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 15:20:00 -0500:
2013-06-09 15:20:05 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 15:20:05 -0500:
2013-06-09 15:20:13 -0500: Verifying Image “Macajee’s MacBook Pro”
2013-06-09 15:20:14 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 15:20:14 -0500:
2013-06-09 15:25:21 -0500: Verifying Image “Macajee’s MacBook Pro”
2013-06-09 15:25:23 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 15:25:23 -0500:
2013-06-09 15:25:27 -0500: Attach Image “Macajee’s MacBook Pro”
2013-06-09 15:25:27 -0500: Initializing…
2013-06-09 15:25:31 -0500: Attaching…
2013-06-09 15:25:31 -0500: Finishing…
2013-06-09 15:25:32 -0500: Unable to attach “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 15:25:32 -0500:
2013-06-09 20:02:06 -0500: Disk Utility started.
2013-06-09 20:05:22 -0500: Disk Utility started.
2013-06-09 20:07:11 -0500: Disk Utility started.
2013-06-09 20:18:34 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:18:34 -0500:
2013-06-09 20:19:34 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:19:34 -0500:
2013-06-09 20:19:36 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:19:36 -0500:
2013-06-09 20:22:29 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:22:29 -0500:
2013-06-09 20:22:33 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:22:33 -0500:
2013-06-09 20:22:45 -0500: Verifying Image “Macajee’s MacBook Pro”
2013-06-09 20:22:45 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 20:22:45 -0500:
2013-06-09 20:34:53 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:34:53 -0500:
2013-06-09 20:34:56 -0500: [DUDiskController viewablePartitions] expecting DUDisk, but got nil
2013-06-09 20:34:56 -0500:
2013-06-09 20:38:17 -0500: Verifying Image “Macajee’s MacBook Pro”
2013-06-09 20:38:17 -0500: Unable to verify “Macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 20:38:17 -0500:
2013-06-09 20:47:35 -0500: Disk Utility started.
2013-06-09 20:53:06 -0500: Disk Utility started.
2013-06-09 20:55:30 -0500: Disk Utility started.
2013-06-09 20:56:40 -0500: Disk Utility started.
2013-06-09 21:06:32 -0500: Verifying Image “macajee’s MacBook Pro”
2013-06-09 21:06:32 -0500: Unable to verify “macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 21:06:32 -0500:
2013-06-09 21:07:08 -0500: Verifying Image “macajee’s MacBook Pro”
2013-06-09 21:07:08 -0500: Unable to verify “macajee’s MacBook Pro.” (Resource temporarily unavailable)
2013-06-09 21:07:08 -0500:

Issues with Time Machine File Restore Permissions and Interface

Hi All,I bought a Time Capsule in January 2010, and i've had backups since then.
Time Machine's interface has pretty much always been laggy as ****, but I've always put that down to using it over wifi, perhaps that was a wrong assumption.
Anyway, I went to open a folder in a virtual machine which resides in my mac's documents folder, and it wasn't there. Sure enough this folder wasn't in my documents folder, so I thought i'd restore it from time machine. Time machine shows every segment as a pink fully coloured one (signalling theres a backup there) for a few secs, before most of them turn into a pale pink. Looking into the issue further, it seems as though I don't have permission to access the documents folder on a lot of backups, by looking at the users/brett/ folders on them (which i do have access to), right clicking on the restricted folder shows that everyone has no access, and it's fetching the other user. Trying to add myself to it doesn't work.
I have gone through two MBPs with the same backup set, and a number of hard drives (the latest being a SSD I put in yesterday, and the migration assistant restore from time machine worked without skipping a beat - never had a problem doing full restores or migrations, just using the interface)
Obviously the easiest thing to do would be to start afresh, but I'd rather not as I'd lose 2 years worth of backups, and who's to say this wouldn't just happen again in the future? Could this be why the interface is so slow too?
Thanks guys

studentguy wrote:
Time Machine's interface has pretty much always been laggy as ****, but I've always put that down to using it over wifi, perhaps that was a wrong assumption.
Yes, there is a lot going on to "populate" the display -- it can be sluggish even to a FireWire 800 drive.
Looking into the issue further, it seems as though I don't have permission to access the documents folder on a lot of backups, by looking at the users/brett/ folders on them (which i do have access to), right clicking on the restricted folder shows that everyone has no access, and it's fetching the other user. Trying to add myself to it doesn't work.
I don't do Windoze, so am not familiar with the structure of the VM files, or how the permissions on them work. Many folks exclude them from Time Machine, and back them up separately.
I have gone through two MBPs with the same backup set, and a number of hard drives (the latest being a SSD I put in yesterday, and the migration assistant restore from time machine worked without skipping a beat
Yes, because it simply copies whatever permissions are there. It doesn't need to (and shouldn't) check whether the logged-on user has permission to anything.
Could this be why the interface is so slow too?
It could be a contributor.
Can you set the permissions on the VM files on your Mac so everyone has read rights? That should at least allow you to restore their backups.

What is a good external hard drive to use with time machine running osx lion?

My LaCie HD quit and I need to get a new one. What is recommended to use with the Lion OS? I would like to use Time Machine and hook the HD up using Firewire.

I've been using several Mercury drives from OWC (MacSales) for years with no problems whatsoever. They are good and not expensive. Here's where you can find them. Pick one that fits your needs.
http://eshop.macsales.com/shop/firewire/
Rick

Trouble with Time Machine (runs constantly). Erase and install?

Similar Messages

Maybe you are looking for