Trouble with two computers connecting to wireless on WRT54G

I am using a WRT54G router and I am unable to have two computers connected to the wireless at the same time. When one computer connects it will boot off the other computer and/or not allow it to connect. Both machines are macs and it switches between the both of them- it is not consistently one or the other who has the issue. Any ideas or suggestions? 

You can try upgrading the router's firmware and then re-configure it...
Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router... 

Similar Messages

  • How to sync with two computers not at the same time, I'm registerd with one computer

    How to sync with two computers (not at the same time), I'm registered with one computer and am trying to connect with second computer with same iPhone. To sync the first time with the second PC "Firefox Sync Option tells me Create New account or Connect, when I connect it gives me a Passcode and on iPhone it also gives me a Passcode, than how do I connect? Both the iPhone and PC gives me a Passcode and have now idea what to do with them.
    Where do I find my Sync Key ? so I can install manually if it works ?

    Use the Sync Key ''(Recovery Key)'' from the PC that you used to initially setup your Firefox Sync service, when setting up that 2nd PC with Sync. You need to use '''Add a device''' to setup the 2nd and subsequent devices on a Sync account. <br />
    https://support.mozilla.com/en-US/kb/add-a-device-to-firefox-sync

  • I am having trouble with the initial connection. I have isolated the problem to the cable/ connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

    I am having trouble with the initial connection of the apple tv. I have isolated the problem to the cable/connection. My new hdmi cable has a resolution up to 1080p...does the resolution matter?is this the right hdmi cable for the apple tv?

    There are only two types of HDMI cables (standard and high speed - listen to all 1.2, 1.3 etc etc nonsense they will try to tell in the store) both types will work with the Apple TV.
    The cable may be faulty though, have you got another to try, what exactly is happening.

  • Two computers connected to one router, two external IP? How?

    Hey Im just playing around with the Remote Desktop and I have two computers connected to a router but when i search for external IP it shows only one of them. Is there a way of distinguishing more computers in one network from outside of the network? THANKS!!!

    http://support.apple.com/kb/TS1882
    To connect to more than one computer behind an NAT router, you'll need to have Apple Remote Desktop 3.3.

  • Using PalmVx with two computers

    I have been using a PalmVx with my Desktop computer (WIN XP Prof) and also with my laptop (WIN XP Prof). I recently formatted the HDD of my laptop and have re-installed my palmOne software ver 4.1.4 on my laptop. While installing the palmOne software in my laptop when asked for <User Name> I gave the same Username as in my desktop computer. So now my laptop indicates the identical Username as my desktop computer.
    My desktop computer is connected to the palm cradle using a serial connection while my laptop is connected through a Serial-to-USB adaptor to a USB port on my laptop.
    I need to have all my data in my PalmVx transferred to my laptop, so I set all the conduits in my laptop to "Handheld overwrites Desktop" and carried out a Hotsync.
    The Hotsync dialog that comes up on the laptop shows a UserName <blank> instead of the Username that I set (similar to the desktop).
    Please advise how I can get all my data currently on my desktop and in my handheld into my laptop?
    TIA
    Post relates to: Palm Vx

    Actually, there are several articles on the web about the fact that you CAN
    synch the itunes with two computers. Music, Video, and Ringtones can be done from one computer, and Mail, Contacts, etc. can be done from a second computer.
    Just do a Yahoo search on "synching iPhone with two computers."
    If you are trying to do music from two computers, you are right, that will not work. There is a program, which I think the Yahoo search above will also uncover that allows you to do a "swap," where you can have the songs from one computer show up on the iPhone, and when you swap, the songs from the other computer show up. I am not sure if this utility survived the upgrage to version 2.0 of the softweare.
    cheers,
    Ray

  • Using iPhone with two computers

    Home PC - MacBook Pro
    Work PC - Windows
    both running iTunes 7.7
    My music is on my home Mac and I manually create playlists, add music etc.
    With my 3G Nano, I can connect and listen to songs on my iPod from my work PC. I can't seem to do this with my iPhone - my PC sees the iPhone but all of the music is greyed out and cannot be selected.
    Is it a limitation of the iPhone that I cannot use it with two computers in this way, or is it a configuration issue?
    I would prefer not to have to buy a set of external speakers just to use my iPhone to play music at work.
    thanks
    Shane

    Actually, there are several articles on the web about the fact that you CAN
    synch the itunes with two computers. Music, Video, and Ringtones can be done from one computer, and Mail, Contacts, etc. can be done from a second computer.
    Just do a Yahoo search on "synching iPhone with two computers."
    If you are trying to do music from two computers, you are right, that will not work. There is a program, which I think the Yahoo search above will also uncover that allows you to do a "swap," where you can have the songs from one computer show up on the iPhone, and when you swap, the songs from the other computer show up. I am not sure if this utility survived the upgrage to version 2.0 of the softweare.
    cheers,
    Ray

  • Mighty mouse with two computers

    Is there a way to pair a Mighty Mouse with two computers and to them switch back and forth between them easily? I realize I could unpair from one and then pair with the other, but I’m trying to use a Mighty Mouse in lieu of a KVM switch with a wired mouse.

    Yes and no. It all depends on the device, and I can't speak from experience when it comes to the Mighty Mouse, but I can speak from experience with other Bluetooth devices.
    You can pair a device with multiple computers, but you cannot use it with multiple computers simultaneously. When switching, you'll have to tell your computer to disconnect from the mouse before the other computer can connect to it. Since we're talking about a mouse, reconnecting the mouse might be a little tricky, if you want to use only one. Perhaps adding something like an Optimus Mini Three (or similar HID) with an AppleScript attached to one of the buttons to trigger mouse reconnection could work.
    There are software based solutions to your problem, enabling you to connect any HID (Human Input Device) to your computer, and then use a virtual KVM over the network. I've seen a few pieces of software like this in the Apple Downloads Database, but I don't know if they're free.

  • TS1468 I am having trouble with two cover flows duplicating themselves more than once, is there anyone out there that can help me with this, they are not duplicated in my itunes library, just the ipod.

    I am having trouble with two cover flows on my IPOD, duplicating themselves more than once, they haven't duplicated themselves in my Itunes library, just the ipod, could anyone have any ideas on how I could fix this problem. I have tried so many times, even if I restore the ipod, it still does the same thing. Please if possible email me at [email protected] with any suggestions.

    Aha! I have sorted it.
    For those with similar problems, the solution is this:
    Macintosh HD > Library > Audio > MIDI Drivers
    Then delete DigiDioMidiDriver.plugin

  • I got a new computer and now iTunes is telling me it can't sync with two computers

    I got a new computer and now iTunes is telling me it can't sync with two computers, it's telling me it will erase what's on my iPad and re-sync. Will I lose my iPad data that's on it?

    No - not at all. Look at that one app that I gave you the link for. That is supposed to transfer all of the iPad content to the new computer. I have no idea how much it costs, but it's worth a look. There are other out there as well. Google "apps to transfer iPad content to computer" or something to that effect. These apps claim to transfer everything.
    Several things to remember - you can still transfer all of the iTunesicon tent that you purchased by using the Transfer Purchases option in iTunes. Just remember to turn off auto syncing before you do it. You will also have to authorize your new computer to transfer the purchase if you haven't done so already. From the iTunes menu on your computer go to Store> Authorize this computer.
    Plus any apps or music that you have bought can be downloaded again at no charge with the cloud feature in the latest iPad iOS.
    EDIT - I see that you did transfer the purchases. Look at one of those apps that I described and they should be able to get you set up. You should also invest in an external hardrive for backing up all of your computer content ... don't want this to happen again!
    Message was edited by: Demo

  • Is there a cable with two Apple connections and one USB connection?

    Is there a cable with two Apple connections and one USB connection?

    it would be possible without damage to the phones if only the charging pins was used
    but it would mean the 2 phones would charge 1/2 as fast as normally

  • I am working with two computers in my profession (Mac/PC). I want to download testversions, lets say Premiere Elements 13, for Mac and PC using my adobe login. Is this possible?

    I am working with two computers in my profession (Mac/PC). I want to download testversions, lets say Premiere Elements 13, for Mac and PC using my adobe login. Is this possible?

    Sure. Elements is cross-platform, anyway.
    Mylenium

  • I am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

    i am having trouble with exchange account connection .the vpn connects fine but the exchange account is still showing the yellow light .can anyone help?

    I had a similar problem.  Here is how I resolved the issue.
    1.  Remove Network Connect
    2. Run Terminal and remove /usr/local/juniper and everything within the juniper directory.
    3. Reboot the machine and reinstall Network Connect
    4. Test if you can now connect.
    During removal, you may encounter permission denied error, you will need to change the permission to 777.  For example "sudo chmod 777 nc".

  • Working with two computers. One of them not working

    I've been working with two computers. In one of them where I have already  installed several programs downloaded with the Adobe Application Manager, when I try to open a program is giving me a message to sign in for a 30 day trial of the program? Why is this happening?

    Try http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  • Having trouble with screen saver connecting to my photos?

    Having trouble with screen saver connecting to my photos?

    I will try that, but isn't Skype supposed to work without headphones? Why does it work with ichat when I talk to my friends with macs?
    S

  • Can you control your Iweb-website with two computers?

    I would like to maintain my Iweb website with two computers. Is this possible? I bought a new computer and I want to work on my website from two locations.

    Welcome to the discussions. These articles may help:
    iWeb: Publish to your MobileMe account from more than one computer
    Managing an iWeb site from multiple Macs with Dropbox
    Also see NOTE 1 here:
    http://iwebfaq.org/site/iWebTwocomputers.html

Maybe you are looking for

  • Unable to load Canon MP160 printer driver

    I've had the hardest time using my Canon MP160 printer on my iMac (Mac OS 10.5). In fact, I'm not able to print at all. I have the printer connected via USB. It always has been. However, it only stopped working recently. I downloaded the drivers for

  • Can not install emcli on Debian

    Hi, I try to install emcli on debian, but without success. I log in as me (dap) but setup show errors... Any ideas why it do not work? Thanks for any help dap 11:27:31 dap@sezam ~/emcli $ ./emcli setup -url=http://xxx:4889/em/ -username=system Oracle

  • Using Data Rescue II to recover lost files from corrupt hard drive!!!

    OK I am terribly confused. I found out my MacBook Pro hard drive is corrupt and I can't even start up my computer. I was told to get Data Rescue II, another Mac, and an external hard drive. I have all of the above but have no idea how to make it work

  • Memory leak in "get property value (string)" ?

    Hi, I'm not sure which forum to post this to because it involves a combination of labview and teststand.  The error I'm getting is more teststand related so it is here. In our application, we have a labview queued state machine launched by a teststan

  • Web Part \ Asynchronous Input Output

    Visual Web Part, two controls: textedit and label below. When textedit is changed label should show smthn. This should work dynamically, transparently, asynchronously, without loosing textedit input focus. In other words – without postback. I am look