Trouble with Unity Connection and LDAP
Our CUCM 8.6 is currently integrated with LDAP, this was done before I started with the company, I'm working on getting the CUC integrated as well, but I keep getting the following error message:
Error while Connecting to ldap://xx.xx.xx.xx:389, null
I took the exact same settings that was used on the cucm (the LDAP syncs fine with CUCM)
LDAP Configuration name: ActiveDirectory
LDAP Manager Distinguished Name: [email protected]
LDAP Password: *******
LDAP User Search Base: DC=xyz,DC=net
User ID: sAMAccountName
Middle Name: middleName
Manage ID: manager
phone number: ipPhone
First name: givenName
Last Name: sn
Department: department
Mail ID: mail
User ID: sAMAccountName
Middle Name: middleName
Manage ID: manager
phone number: ipPhone
First name: givenName
Last Name: sn
Department: department
Mail ID: mail
Any ideas what could be causing that error? I've ran into this before somewhere but was able to figure out that it was something with the way I had put in the OU..This time I'm really I have not idea, especially since I took the settings from the LDAP setup in CUCM.
Hi Chris,
Yes I'm sure the sync is still working, I've went into CUCM and did a full sync and it was successful, I also hit save and that was successful as well, that was the first thing I did just to make sure it was working, I was thinking like you that maybe it wasn't working properly ...I'll take some screen shots and post shortly
Fred
Here's a screenshot of both CUCM and CUC
Message was edited by: Fred Rawlings
Similar Messages
-
Trouble with LAN connection and DHCP
I would greatly appreciate any input on this issue.
Some reason when I installed Arch from the 2009.08 release it would always fail when I try to use dhcpcd eth0 or dhclient eth0.
It would say:
... Looking for carrier
... timed out.
I thought that it might be the cable or the router but I have tried multiple cables and routers in different locations, and it works fine when I run in Windows.
Nothing I have tried has worked, I have been searching for forums for a similar issue. I have had to use a wireless connection for everything internet based.
Last edited by phoenix89 (2009-09-14 02:41:55)I meant it works fine in Windows...
but the output for the lspci -v is:
lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX
Subsystem: ASUSTeK Computer Inc. Device 1af7
Flags: bus master, medium devsel, latency 64
Kernel modules: sis-agp
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fa000000-fdefffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01)
Flags: bus master, medium devsel, latency 0
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) (prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Device 1af7
Flags: bus master, medium devsel, latency 128
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at fff0 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_sis
Kernel modules: ata_generic, pata_acpi, pata_sis, ide-pci-generic, sis5513
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 1af7
Flags: bus master, medium devsel, latency 64, IRQ 20
Memory at f9fff000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 1af7
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at f9ffe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 1af7
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at f9ffd000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter (rev 02)
Subsystem: ASUSTeK Computer Inc. Device 1815
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at f9ffcc00 (32-bit, non-prefetchable) [size=128]
I/O ports at cc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: sis190
Kernel modules: sis190
00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device 1af7
Flags: bus master, medium devsel, latency 64, IRQ 17
I/O ports at c800 [size=8]
I/O ports at c400 [size=4]
I/O ports at c000 [size=8]
I/O ports at bc00 [size=4]
I/O ports at b800 [size=16]
I/O ports at b400 [size=128]
Capabilities: <access denied>
Kernel driver in use: sata_sis
Kernel modules: ata_generic, pata_acpi, sata_sis, ide-pci-generic
00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fdf00000-fdffffff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fe000000-febfffff
Prefetchable memory behind bridge: 00000000f6000000-00000000f8ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller
Subsystem: ASUSTeK Computer Inc. Device 1203
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at f9ff4000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
01:00.0 VGA compatible controller: nVidia Corporation G96M [GeForce GT 120M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 1a42
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at dc00 [size=128]
Expansion ROM at fde80000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel modules: nvidiafb
02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Device 1a3b:1067
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fdff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k -
Having trouble with internet connections using my Apple G5 OSX 10.4.11. Attempts to upgrade FireFox or Safari results in being incompatible with with this system. Tried to locate earlier versions to replace upgraded incompatible software only to find that problems have worsened with crashing results. What should I do short of trashing this wonderful G5 and purchasing a new iMac which I really can't afford?
Chuck's DilemaHi Chuck,
TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
http://www.floodgap.com/software/tenfourfox/
I'd avoid vesrion 24 though, as it no longer supports plug-ins like Flash.
SeaMonkey seems pretty fast also, with many options...
http://www.seamonkey-project.org/
http://www.seamonkey-project.org/releases/
Might also look into iCab & OmniWeb versions.
Also...
The last really supported Flash for PPC was 10.1.102.64, but if it's for like Facebook or such, people have been fooling FB to think they have a leter version installed.
Texas Mac Man's Flash hack/post...
https://discussions.apple.com/thread/3599648?tstart=0
Flash player 11.1 hack on PowerPC - https://discussions.apple.com/message/16990862
Might be later ones around also... saw 11.3 I think.
(If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, contributor Texas Mac Man suggests the following solution which fools the site into thinking that you are running the latest version:)
Download this http://www.steelbin.com/FPforFBPPC.zip to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.
See in each Browser which version of Flash it thinks it has...
http://kb2.adobe.com/cps/155/tn_15507.html -
i just got an ihome system and had trouble with it connecting to my iPhone. I finally got it to work and now my itunes doesn't recognize my phone. My software is up to date on both my Mac and my iPhone and I have shut everything down and restarted. Does anyone have any other suggestions?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T
Trouble with CCME 4 and VIC2-2FXO; IOS 12.4(9)T
I am having trouble making outgoing call or answering incoming call.
When I try to call out from my IP 7961 phone, it fails with the message "unknown number".
For incoming call, it rings but when I pick up the call nothing happens,
Put the receiver back on hook, the phone carries on ringing. I am in UK
and just trying to set up test system with one analogue line. Any help will
be most appreciated. My config of the 2811 router is posted below. All calls ineternally works fine.
Thank you for your help.
hostname Test-CME
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.10.10.1 10.10.10.10
ip dhcp excluded-address 10.139.139.1 10.139.139.10
ip dhcp pool host
network 10.10.10.0 255.255.255.0
default-router 10.10.10.1
option 150 ip 10.10.10.1
ip dhcp pool data
network 10.139.139.0 255.255.255.0
default-router 10.139.139.1
dns-server 10.139.139.5
voice-card 0
no dspfarm
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
h323
sip
header-passing
registrar server expires max 3600 min 3600
interface FastEthernet0/1
no ip address
no ip mroute-cache
duplex auto
speed auto
no shut
interface FastEthernet0/1.2
description ** Data VLAN **
encapsulation dot1Q 2
ip address 10.139.139.1 255.255.255.0
interface FastEthernet0/1.3
description ** Voice VLAN **
encapsulation dot1Q 3
ip address 10.10.10.1 255.255.255.0
ip http server
ip http authentication local
no ip http secure-server
ip http path flash:
tftp-server flash:S00104000100.sbn
tftp-server flash:TERM41.7-0-3-0S.loads
tftp-server flash:term61.default.loads
tftp-server flash:term41.default.loads
tftp-server flash:CVM41.2-0-2-26.sbn
tftp-server flash:cnu41.2-7-6-26.sbn
tftp-server flash:Jar41.2-9-2-26.sbn
tftp-server flash:term70.default.loads
tftp-server flash:term71.default.loads
tftp-server flash:cnu70.2-7-6-26.sbn
tftp-server flash:Jar70.2-9-2-26.sbn
tftp-server flash:TERM70.7-0-3-0S.loads
tftp-server flash:CVM70.2-0-2-26.sbn
control-plane
voice-port 0/3/0
connection plar opx 202
caller-id enable
dial-peer voice 1 pots
incoming called-number .
destination-pattern 9T
port 0/3/0
telephony-service
load 7914 S00104000100
load 7941 TERM41.7-0-3-0S
load 7961 TERM41.7-0-3-0S
load 7970 TERM70.7-0-3-0S
max-ephones 20
max-dn 40
ip source-address 10.10.10.1 port 2000
calling-number initiator
service phone videoCapability 1
system message MKC CME
url services http://10.10.10.1/voiceview/common/login.do
url authentication
http://10.10.10.1/voiceview/authentication/authenticate.do
time-zone 21
date-format dd-mm-yy
voicemail 600
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh music-on-hold.au
web admin system name admin secret 0 test
dn-webedit
time-webedit
transfer-system full-consult dss
transfer-pattern 9.T
secondary-dialtone 9
create cnf-files
ephone-dn 1 dual-line
number 201
label 201
description Sarah
name Sarah
ephone-dn 2 dual-line
number 202
label 202
description Vitthal
name User2 Vitthal
ephone-dn 3 dual-line
number 203 secondary
label 203
description Neil
name User3 Neil
ephone 1
video
username "user1" password 201
mac-address 0018.18EE.947F
type 7961 addon 1 7914
button 1:1
ephone 2
video
username "user2" password 202
mac-address 0018.18BB.B973
type 7941
button 1:2
ephone 3
video
username "user3" password 203
mac-address 0018.1885.6BA2
type 7970
button 1:3Hi
Please find enclosed debug attachment for voice ccapi and ephone. First, I called from outside. Extension 202 rings but when I answered on extension 202 nothing happens. Replace the rceiever and the pone starts ringing again.Second step. I tried to call out by dialing 9 and then number but after a while phone displays unknown number.
Thank you for your help.
Vitthal -
when Update to 10.7.2 ,I cannot access to any site with ssl connection and fail to open safari and keychain, unless restart computer and login in with Guest account.
OS:10.7.2
Macbook Pro 2010-mid 13inchI also have the same problem, however if I use Firefox or Opera sites with ssl connection work fine. Still, I can't use Google Chrome (ssl), Safari (ssl), the Mac app store (generally), or the iTunes store (generally). Both the iTunes store, Safari and the app store won't respond, and Chrome displays this error: (net::ERR_TIMED_OUT). The problem persists regardless of what network I'm using. Also, when trying to access the keychain or iCloud, the process will not start (will hang). I didn't have these problems at all before updating to 10.7.2.
Sometimes rebooting helps, and sometimes not. If the problem disappears by rebooting, then it only lasts a few minutes before it reappears. It is very frustrating, especially since there doesn't seem to be any obvious or consistent way of which to fix it.
I'm also using a Macbook Pro 13-inch mid 2010. -
Since the Mountain Lion OS update today I've had issues with internet connection and e-mail, has anyone else?
That's what I would have thought, but even after saving the setting, as soon as I shut down my computer or log out of Mail, it automatically defaults back to 25. It's a bit frustrating.
Now I just need to figure out how to get rid of those horrible pop-up banners but still have my glass sound and number of emails in the red dot when I get an email...
These little tweaks are the only thing I HATE about upgrading my OS. -
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
My itunes account on windows xp shuts down for no reason. If even try to delete something from my library it shuts down. It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store. I have already reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done. Ideas??
Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?
-
Trouble With Opening InDesign and now Photoshop and Illustrator
First off I apologize if this isn't in the correct section. I couldn't find a section specific to my problem since it involves multiple aspects of Adobe products. I was having trouble with InDesign, it kept crashing. So I followed all of the advice I could find on the forums about deleting the preferences and cache information in the Library folder, and that didn't seem to make a difference. So then I thought maybe it needed an update, so I logged into Adobe Application Manager and sure enough, it did. So I clicked on "download" and it stalled there too. Then the manager became unresponsive. I couldn't cancel the update or log out or anything. So then I saw in the forum someone suggested the Adobe Creative Cloud Cleaner Tool if your manager becomes unresponsive. I ran that and then shut my computer off. When I turned it back on, InDesign started working BUT my Photoshop is completely gone from my system (I never messed with it in the first place since I wasn't having any trouble with it.) And the when I tried to click on Illustrator it said "Do you want to begin your trial?" Huh?
I have had a subscription since 2012, why on earth would it suddenly think that I no longer should have access to these programs? If I log on to my Adobe account it shows my subscription and that it's up to date (last payment was April 5, 2015). The versions I was using were the CS versions that I had downloaded directly from Adobe and when I used to have any trouble or when I got a different computer I could just log into my account and then redownload them. They are no longer showing under my products, so I can't figure out what on earth is going on. The website has changed since the last time I downloaded them, so that partly could be me, but I thought they would at least be showing up under products. I contacted Adobe support and the first person I talked to on chat said "this is clearly a technical issue I am transferring you to someone better suited for this," but that's all he said. And I haven't heard from anyone since so I thought I'd make a topic and see if anyone else out there has had a similar problem.The versions I am using are the CS6 versions.*
-
I rented Trouble with the Curve and haven't it yet and I when I went to watch the movie it tells me the file can not be found - please help
Yes, thank you. My apologies, I was typing one handed and did not add that.
Anyway, I have tried deleting the cache, deleting my pics and then re-syncing, etc. and nothing is working This is very frustrating, as I had no problems up until about 2 weeks ago, and now all of a sudden, I have this issue......UGH! -
The Mac Book pro is not charging. The led is green with the connection and the computer is not charging. Thank you for the help
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best. -
Having trouble with wav files and sample rates
Hi ,I am having trouble with wav files and sample rates .I have been sent multiple projects on wav as the main instrumental ; I wish to record in 48.000kHz .Now comes the problem.When I try to change the project to 48k It seems to pitch up the track.I can't have them send the logic/project file as most have outboard synths,different plug ins etc.This particular case the producer has recorded the synth task in 41.000 kHz .My successful outcome would be to be able t create a project file in 48 kHz .And NOT pitch up whne I add the instrumenta wav file .Any help would be gratefully recieved,this is my first post so any mistakes I may have made go easy
You'll have to convert the actual synth audio file file that the producer gave you to 48kHz. You can do this in the audio Bin in Logic.
-
I'm having trouble with iTunes synching and accessing the iTunes store.
I'm having trouble with iTunes synching and accessing the iTunes store. When synching, the process tops at the back up stage, freezes and I can't close the iTunes window, need to ctrl alt del. When trying to access the store, the progress bar stops halfway. I've googled heaps and tried most of the standard answers - unistall, reinstall, etc, now looking for some help please.
This has only started a few weeks back, after working smoothly for the 2 years of owning the iPhone 3gs.
Any suggestions will be appreciated, it's getting realy frustrating.
Cheers for now,
Martyhttp://support.apple.com/kb/HT1923?viewlocale=en_US
this worked perfectly for me, with no loss of library! BUT was warned about uninstalling things in the order listed...FYI. -
Trouble with internal keyboard and touchpad
Hi,
Yesterday I just out of nowhere started having some trouble with my keyboard and touchpad on my MacBook Air.
The problem displayed itself on various ways. One thing was that I couldn't press regulary with the touchpad. When I was pressing one time, it acted like a pressed with two fingers. When I tried to type in my password on the administrator page, some of the keys didn't work at all and some started to act weird. For example when I was pressing the letter B, the "bar" which displayes where you are in the text (don't know the word in English) went backwards, and when I pressed the letter F it went forward. This seemes so weird and also gives me a hope that it might be some setting failure though B stands for backwards and F stands for forward.
I could log in to the guestpage where I tried to write in "notes". In notes, no letters at all was working, only numbers. When I tried to shut the computer down from the apple symbol I was asked to write administrator name and password. When I tried to mark the name to write it, there wasn't a "bar" but a cross, but on the other hand did it work to write in the password field. But of course not B and F..
Usualy I'd just press the on/off botton until the computer lockdown, unfortunately the botton doesn't work. So the only thing I could do was to let the battery die and hope that it would start when I recharged it and pressed start, this didn't go as well as I hoped, so now I'm stuck with a dead macbook air.
Any ideas of what could be the problem or/and any solutions what might do the trick?
Extremly greatful for any answersYes you need to use a wired keyboard.
Maybe you are looking for
-
Apple mobile device support 64 wont install
Hello all, So I have been trying to update my itunes on my desktop which is a 64bit system, but when I am able to get itunes to update to 10.5, it will NOT read my iphone/ipad. I have figured out that the apple mobile device support 64 isnt in the c
-
Oracle Express 6.3.4 Installation problem
Hi, We have installaed Oracle Express 6.3.4 in HP Truc 64 M/C. When trying to start Express 6.3.4 version software, i get the foll error as mentioned below. It shows OES_Request -read fails, error 35. Please can anyone let me know what should be done
-
Send reminder 30 days before expire date?
Hi, I hope someone can help me with that. I am getting in an "expireDate" from a Database. It can be for ex. "5/21/2007" . This date is a String. 30 days before that expireDate is reached, I want to send a reminder to the client, like "your membershi
-
During the implementation in 2nd phase - BBP Document
Hi Friends, During the implementation diff. modules are tobe implemented. Each module has 1 consultant i.e., FI, MM, SD, CO consultants. here my question is..... Each consultant will be prepare AS-IS & TO-BE documents for their respective modules i.e
-
I've used Homesite since v3, and upgraded over the years to 4.0, 4.5 and 5.0. Following a system crash I've installed v3, followed by 4 and 4.5 but cannot find my copy of 5 anywhere. Can anyone tell me where I can get a copy of 5 from please? Thanks