Trouble with Update snow leopard 10.6.8 and 10.6.7
Hi,
Since one week, I have trouble with snow leopard.
My child has shut down our imac roughly with the on/off button. So after the restart and before the blue screen the display
is frozen with crazy pixel. I have to look for information for a week, tried all the reset (alt cmd P R , reset smc, safe mode etc ...)
After that I' installed all the OSX snow leopard with the DVD with the 10.6 version
This version is ok and the imac works fine but if I'upgrade this version to 10.6.8 with the combo package
I have the same problem : the display is frozen with crazy pixels
And If I' upgrade with the combo package 10.6.7 somme windows are grey and the menu is grey, the apple menu is black
The fonts are bad.
Before all these installation, I perfromed a smc reset, four times nvram reset, erase hard drive and after
that installation of snow leopard.
The Safe Mode works. Hardware test is OK . disk is Ok ( I used the disk utility),permission is OK
Do you have a solution
Thanks
Hello,
Are you using software Update or getting it directly?
Try re-installing the big 10.6.8 Combo...
http://support.apple.com/kb/DL1399
Repair Permissions afterwords, reboot.
If that doesn't do it, it sounds like a video card problem, have you blown the dust out lately?
Boot off your *original* Install Disk while holding down the *d key*, (not c key), then run the extended Apple Hardware Test. Some disks require you to use the Option key at bootup to select AHT. Some Discs have it inexplicably on Disc #2.
Similar Messages
-
Troubleshooting with update snow leopard - mini mac
Hi,
I have a troubleshooting during upgrade snow leopard in mini mac.
I see white screen, I haven't access to menu mac os, just a white screen.
If somebody have idea of solution, thank you for our help
JN2EAre you by chance using an Iogear or othe usb / firewire hub? I'm having a similar problem and I think it may be caused by this device. Try unplugging any usb hubs from your machine and see if the machine boots up. I have a feeling these hubs need an update to work with Snow Leopard.
-
Trouble With installing Snow Leopard on my 4 year old Macbook
I'm trying to install Snow Leopard to my 4 year old Macbook stuck on 10.5.8, but it keeps saying "The application 'Install Mac OS X' cannot be used from this volume." I've tried almost everything to solve this, but I can't find anything at really helps my situation. I've looked on some of these discussions, and they haven't really helped much. My Macbook has a: 2.4 GHz Intel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAM, and is stuck on OS X 10.5.8. Please give me your input and help
Are you using a Retail version of Snow Leopard that looks like this?
Or gray discs that look like this?
The gray discs are machine specific and will only work with the MacBooks that they were shipped with. -
Network C7280 through Mac Time Capsule with iMac Snow Leopard, MacBook Pro S and Compaq W7
The HP works fine with the iMac desktop, but the 2 laptops won't print, although they seem to be recognizing the network. Says printer not connected. The HP Photosmart C7200 Wireless Network Test Report and Configuration Page seem to be normal and functional.
This question was solved.
View Solution.If you are using Snow Leopard or Lion and have HP software for pre-Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the HP software on your Mac before you upgraded - even if you did a standard uninstall of the old software or installed new software over the top of it) you must uninstall the software using the 'scrubber' option:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Hold the Ctrl, Opt and Cmd keys and click on Uninstall <<<< Scrubber Option
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Restart your Mac
Now reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Why doesn't LightScribe work with my Snow Leopard?
Why doesn't LightScribe work with my Snow Leopard? It downloaded and is in my printer folder, but won't open.
Are you really still running 10.6.3? If you are you should run the combo update as many issues were resolved within the updates themselves.
Mac OS X 10.6.8 Update Combo v1.1 -
Hi. Just updated software and now get a plug-in failure message when trying to watch internet show. Any thoughts?
SavhStudent wrote:
I've discovered that all of these applications (programs) are PowerPC and are not supported within OS X Lion. Is there a Rosetta plug-in that one can get? Any news about Apple updated Lion to include one? Any other things I can try?
There is now and will never be any way for PowerPC apps to run on Lion.
You'll need to go back to Snow Leopard.
Call Apple and ask for a refund on your Lion Purchase -
Hello all,
This Mac is 3-4 years old and is using snow leopard 10.5.8. I am having trouble with the compiler when using Dr. Java and I am thinking about updating to newer version and would like info about:
- Is the compiler that comes with Lion a newer version than what I have now which is JDK 6.0_26?
- Are there any concerns with updating from the current OS x I have now to Lion?
- Are there any big additions to Lion that are note worthy?
Thanks for any input!10.5.8 is Leopard, not Snow Leopard. Snow Leopard is 10.6.x.
You will have to upgrade to Snow Leopard before you can upgrade to Lion. -
Home sharing does not work after update to snow leopard 10.6.4 and iTunes 9
I am using home sharing since about a year without any problems. After updating to snow leopard 10.6.4 and iTunes 9.2 it suddenly does not work anymore.
On my iMac and my Mac Book Pro I get error code 3259 and it tells me to check my firewall and to enable Port 3689.
I did not change anything in the firewall settings, itunes on both allows data traffic in both directions. I also do not find any option to activate a port ( also wondering why this is suddenly now necessary)
I deactivated home sharing on both machines and enabled it again. It still does not work.
On both machines iTunes displays the the library on the left side but like said it is not accessable
With Finder I can access the other computer from both machines without any problem.
Any help to solve this would be very much appreciatedfirst of all, if you are behind a router firewall, and have your network secured (WPA2 and a long, non-dictionary password made up of letters and numbers), you don't need the software firewall on your Mac(s).
@ least turned if off for troubleshooting purposes.
turn home sharing off on both computers, and make sure
(a) both Macs have access to the internet
(b) iTunes on both machines is authorized for the same iTunes account.
turn home sharing back on on both Macs.
does it work ?
JGG -
Microsoft Office 2004 (Word) unable to save files
I have been running Office 2004 on my Intel iMac with Snow Leopard for some time and all of a sudden I cannot save a document. Word just stopped responding and I have to force quit. I can open Word and create a new document but I cannot save it. I reinstalled Word but that didn’t help. Then went to the Internet and found at least one other Mac user having the same problem which it suggests is caused by a recent Mac Security Update:
http://answers.microsoft.com/en-us/mac/forum/macoffice2004-macword/word-2004-wil l-not-open-or-save-documents/b04eb870-9b0d-4f3b-bb47-b122301e36f6
So I check for a new Mac Security Update and sure enough there was one. I downloaded it and now Word seems to be working, as it should. I can both open and save files. The only problem remaining is that when I open Word I get the following error message “An unexpected error occurred while trying to load the Microsoft Framework library”. I contacted Apple but they were unable to help.
How can I get rid of this error message?Look, I realize you might have to get your machine working, so this is how you revert back.
Restore proceedure to pre-Security Update 2012-001 v 1.0 & v 1.1
#1 Backup your personal data off the machine.
Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
Disconnect all drives now to prevent any mistakes from occuring.
#2 Reinstall OS X 10.6 from disk
Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk of your internal drive (do not format or erase!!), Quit DU and simply re-install 10.6.
Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway) or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
#3 Update to 10.6.8 without Security Update 2012-001 v1.0 or v1.1
Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
#4 Reinstall any non-working third party programs
When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason as they are missing the part they installed into OS X.
If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
https://support.apple.com/kb/TS2570
That's it really. -
Trouble migrating from Snow Leopard to Lion
I've been using a MacBookPro5.2 that's running OS 10.6.8. I bought a new MacBookPro, and installed Lion on it. Now I'm trying to migrate my whole electronic life over to the new computer, and I've been having big problems. I think I may have fixed those problems, but I'm not sure if it's really safe to start using the new computer the way it is. Can anyone tell me if I'm doing this correctly? I hope this may help other people having similar problems.
Here's what I've done so far:
1. I ran Software Update on the old mac, to make sure that I had the latest version of 10.6.8. The only account that exists on the old computer is called "administrator." The "short name" for that account was my initials, which we'll say are "abc".
2. I installed Lion on the new computer (it had come with Snow Leopard originally), started up, and created an account called "administrator," with short name "administrator." Of note, the new computer was then running 10.7.0, and I hadn't updated to 10.7.1 before attempting the migration.
3. I connected both computers to my router, and ran Migration Assistant, checking all of the checkboxes, in order to transfer everything (accounts, applications, settings, and other files and folders). Migration Assistant noticed that the name of the only account on the old computer was the same as the name of the only account on the new computer. So I said to rename the account that was being transferred to "admin," with short name "admin."
4. On the old computer, I keep almost all of my documents in directories directly under the root directory, not under /Users/abc. After ten or so hours of migrating, it appeared that pretty much all of those files, including Applications, had all come over to the new computer. There was also a new account on the new computer, called "admin," as it should be. However, the "admin" account wasn't set up properly. I was able to log in as admin, using the old password that I used on my old computer, but admin appeared to have no home directory. So, for example, my desktop picture and all of the stuff on that was supposed to be on my desktop weren't there, and I couldn't access my iTunes library. On the dock, where I should have seen icons for "Documents" and "Downloads," I had only big question marks.
5. I deleted the "admin" account, started up from the recovery disk, and re-installed Lion from scratch. Then I ran Migration Assistant, doing it the same way, except that this time I only checked the "accounts" and "settings" boxes. The transfer was much faster this time, but everything ended up the same. This didn't fix my problem.
6. I logged out of the new computer, and logged in again as my original account "administrator." Then I saw that there was in fact a /Users/admin home directory, but it was owned by the wrong account, i.e. administrator. So I did this:
sudo chown -R admin /Users/admin
Things then looked a lot better. I logged in as admin, and now my desktop items are there, my iTunes library is accessible, etc. I checked, and verified that admin is listed as having administrator privileges. So I guess my next step would be to delete the original "administrator" account, so that there's only one account left. Is it safe for me to delete the original administrator account that I set up? I'm afraid to do that, because I'm not sure that everything is really in order. For example:
1. When logged in as admin, the Macintosh HD icon never appears on my desktop, even if I check the appropriate box under Finder -> Preferences. It does appear properly if I'm logged in as administrator.
2. Dropbox keeps looking for a /Users/abc/Dropbox directory, and breaks because it can't find that directory. I don't really care about that, because I can just uninstall and reinstall Dropbox. But I don't want to run into other problems in the future because other applications are looking for /Users/abc.
3. In various places, Lion keeps referring to my new computer as "administrator's-MacBookPro," or something like that. That makes me worry that I'll have some problems if I delete name of the account that supposedly owns the computer.
So, is it safe for me to proceed with deleting the original account? I haven't really used the new computer yet, so I'd be happy to wipe the whole hard disk clean and start the migration process over from scratch, if that will help to make everything more stable going forward. And if someone can tell me how to do that!
I apologize for the long post. Thanks in advance for any help.Whew! I finally got my new machine working with all my old stuff on it, thanks to baltwo's tip to try reinstalling the OS from scratch, which pointed me in the right direction. The key additional points were (1) to make sure to erase the hard drive first, and (2) do the transfer to Lion, rather than Snow Leopard, because at least in my case, SL's Setup Manager was buggy and always hung forever right when it was about to start transferring. Also for some reason the transfer was much faster in Lion.
This was a very ugly experience for me. There were lots of times when my computers crashed, hung, wouldn't wake up, and otherwise made me feel like I was at work, trying to use Windows boxes. For the benefit of any other people who may stumble upon this thread, here are a set of steps that you can follow if you have a mac that is new (or new to you) and you would like to have it running Lion, and having all of the stuff from your old Mac on it, but with no other user's stuff on it. In the simple case where your new Mac comes preinstalled with Lion and you're the first human ever to turn it on, then ignore all of this, and just turn it on and follow the onscreen instructions. However, I think you should follow the following steps if (A) the new Mac already has on it an account or account that you want to wipe out, and/or (B) the new Mac is running Snow Leopard, and you want to upgrade it to Lion before migrating your stuff over (which I think is a good idea -- as I said, my computer kept crashing every time I tried to migrate from SL to SL, and besides, maybe a "clean install" of Lion is somehow better).
[If your new Mac is already running Lion, skip to step 4. If your new mac is running SL, start here.]
1. On the new mac (which is running SL), if you're turning it on for the first time, create a temporary administrator account that you're going to wipe out shortly. If there's already an administrator account on the new computer, log in as that administrator.
2. As the administrator, run Software Update, and keep running it repeatedly and restarting if necessary, until Software Update no longer finds any updates to install.
3. Upgrade the new Mac to Lion. You'll probably do this via the App Store. After Lion has downloaded and installed, your computer will restart.
4. Log in into the new Mac, which is running Lion, as your administrator account. Same password as before.
5 Run Software Update, and keep running it repeatedly and restarting if necessary, until Software Update no longer finds any updates to install. I'm not sure this step is really necessary, but I wanted to be sure that the new Mac was running the very latest version of Lion, since there seemed to be some problems with Lion's Setup/Migration assistant.
6. You may not have realized this, but Lion created a locked partition on your hard drive that contains a complete backup copy of itself, plus various utilities, including the disk utility. Boot your new mac from that recovery partition by starting it up (or restarting it), and holding down "command-R" while it's restarting. You'll be presented with two choices, asking whether you want to boot from the main hard disk partition, or the recovery partition. Choose the recovery partition.
7. Having started up from the recovery partition, you now need to run disk utility. If I recall correctly, you do this by pulling down the "Utilities" menu from the top of the screen, and choosing Disk Utility.
8. In Disk Utility, choose "erase," and erase the main partition of your hard drive, which I think will be called "Untitled" or maybe "Macintosh HD." Be sure to highlight "Untitled" or "Macintosh HD" before you go ahead and erase, and don't erase your recovery partition by accident.
9. Now you have a pristine, factory-fresh Mac, running the latest version of Lion, with no user accounts on it. Just go ahead and turn it on, enjoy the music and graphics, and then follow the onscreen instructions for transferring the data over from your old Mac. -
I need to upgrade my first generation Macbook Air 1,1 to Lion OS x10. I need to install other software that requires 10.7 also a java update that requires 10.7. I am currently on Snow Leopard 10.6.8 and my macbook Air 1.1 will not go up to Mountain Lion. The Lion software update 10.7 is no longer available from the store or downloads.
Where do I get this?
It was only released a couple of months ago.
I really feel disinfranchised already by not being able to upgrade and keep up with other software needs but to not allow me to update to my full capacity is really ridiculous.@Jennacide wrote:
It was only released a couple of months ago.
OS Lion was released 16 months ago... in July 2011.
Lion Tech Specs > http://support.apple.com/kb/SP629
To upgrade to Lion...
Contact Apple in your Country to Purchase a Snow Leopard Disc...
http://support.apple.com/kb/HE57
In the US...
1-800-MY-APPLE or 1-800-676-2775
After the Successful Install, run Software Update to get the latest updates...
Be sure to make a Backup of your Current System Before Upgrading...
Also... Check here for compatibility of 3rd party Software you may be using...
http://roaringapps.com/apps:table -
I'm on a MacPro, Snow Leopard, 10.6.8 and did software update to safari 5.1.4. Now I can't open Microsoft Word or Skype. I've done repair permissions, restarted. How can I fix ASAP? Wish I could dump this and go back to 5.1.2! Help!
Try this Safari5.1 from the installer package
http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link, it took about 4 minutes to download on my test. -
What version of iLife works with Snow Leopard 10.6.8, and where can I buy it?
What version of iLife works with Snow Leopard 10.6.8, and where can I buy it?
Welcome to Apple Support Communities
You can install the latest version, iLife '11. It's available at the Mac App Store, but the versions available there aren't compatible with Mac OS X Snow Leopard, so you have to get iLife '11 on a DVD at eBay or Amazon > http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES
After installing it, open > Software Update, and install the most recent version for Snow Leopard -
Updating Snow Leopard Server Software on Dual Intel Mac Mini
I have a 2009 Mac Mini Dual Core 2.53 Intel with 4 gb Ram running as a server under 10.6.8 Max OSX Server.
But I have never used the server capabilities and don't reallyneed them.
The Boss, Wife, wants ITunes radio on it, but it won't work apparently unless you run 10.9.
I tried updating to 10.9 server, but it wouldn't downlaod because the downloader said it needed to run under OSX 10.9.
I am trying to download Mavericks to see if it'll install, but I'm guessing the server level security won't let it.
How can I update to OSX 10.9 Server to basically keep her system as "same" as possible...so ITunes radio will work on it for her?
Is there an easy way other than copy as much as possible to another HD, reformat the entire original Mini HD and start from scratch?
I don't know if I can install another OS on it's second internal HD and just boot up from that one..since I think the server systen may not allow multiple boot drives?
Is there an easy solution to updateing Snow Leopard Server to Mavericks?Help appreciated Greatly.
I downloaded Mavericks with no problem and held my breath to see if it would install OK.
It did.
No major issues and just about everything is working OK right out of the box.
Transition from Snow Leopard Server to OSX Mavericks Single User OS went fine.
Donlt have to worry about archane "Server Language" anymore and administerring this computer will be much easier.
Hope it's a stable build. -
Update snow leopard 10.6.3 to 10.6.8 doesnot install
i've reinstalled snow leopard 10.6.3 and tried to update to 10.6.8 with software update. The update downloads but doesnot install. What should i do?
Try the combo update.
10.6.8 Combo Updater
Maybe you are looking for
-
Getting download Error in CC desktop app on iMac
In the creative cloud desktop APP in the APPS window I get a message "Download Error" press retry to try again". When I click reload applications I keep getting the same error. I'm using a iMac Core 2 duo with Mac OSX Yosemite. Any thoughts? Thanks,
-
Hi all, I can't get the Daily Show videos to play (flash) on either Safari or Firefox on either of my macbook pro & macbook air. I have the latest version of flash, tried reinstalling, restarting, cleaning out the cache but no dice. Can anyone help m
-
MySql - Connection Props - Please help - willing to pay
Hi, My setup: Windows XP IIS ver 5 MySQL databse Dreamweaver MX 2004 Language ASP.NET VB This is driving me round the bend have searached all forums and nothing is pointing me in the right direction. 1) First question, can I actually use dreamweaver
-
I've copied a batch of 300 pics into the "upload" folder, and initially about 1/4 went to photostream, as evidenced on my iPad. When it stalled out, I matched up the missing pics from the original folder and gave it another shot. About another 1/4 w
-
Hi guys, i'm using oracle 11.2.0.3 32 bit with vs2010 sp1. I'm developing a windows application and i create a dataset file in order to map my db on it. I want to add a custom select to a table adapter a i notice a problem. My query is: SELECT simula