Trouble with VDPAU with Nvidia Properitary Drivers
I've recently got arch on my machine, but I've been unable to get VDPAU to work as a hardware decoder for my media player. I have installed and am running the latest Nvidia proprietary drivers along with the packages nvidia-utils, libvdpau, and lib32-libvdpau. Also, vdpauinfo confirms that my GPU can support VDPAU. I've read the wiki's page on VDPAU, but I'm entirely new to Arch and still somewhat new to linux, so I'm afraid some things may have gone over my head.
Last edited by yeti3871 (2015-04-16 00:46:25)
I'm using mpv with the option "--hwdec=vdpau" the error oput is:
Trying to use hardware decoding
[ffmpeg/video] h264: decode_slice_header error
[ffmpeg/video] h264: no frame!
Error while decoding frame!
Error using hardware decoding, falling back to software decoding.
Last edited by yeti3871 (2015-04-16 21:03:15)
Similar Messages
-
The title of this new thread says it all ..... 3 years since the last offical Lenovo T61/T61p Nvidia Video Driver Package release ..... a virtual lifetime in computer science years.
I'm looking for advice on how to best lobby the technical folks at Lenovo (by phone or here on the Forums) for one last official Lenovo "Nvidia" video driver update for our T61 and T61p units.
Lenovo's most current "ancient" 2009 Nvidia driver packages (found here),
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS001342
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS003876
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS003605
all leave quite a bit of 3D (and some 2D) performance laying out there on the table based on my own testing with current modern Nvidia reference drivers on a cloned test mule hard drive (and never once crashed with the newer Nvidia reference drivers under WinXP 32-bit or Win7 32 bit).
Most all the major 3D gaming benchmarks were nearly doubled, and most importantly, my real world qualitative performance experience seemed even greater than the nearly doubled quantitative benchmark results.
I'm wondering if starting this new thread would be of any benefit to encourage the good folks at Lenovo to consider one last update after 3+ years?
Before I go to the trouble of posting my results, it is my hope that Lenovo could simply try the latest Nvidia reference drivers for themselves, tweak them (if even necessary) and then issue one last offical T61/T61p Nivida driver package update for the road .... hundreds of thousands, if not millions, of T61/T61p w/Nvidia GPU units are still in reliable daily service.
http://www.geforce.com/drivers
Something to please consider.
Two (I used to have Five) - T61p 15.4" WS T9300 2.5Ghz units, August 08/08 Builds with FX570M Nvidia Graphics; ... One W520 i7-2860QM w/2000M Nvidia Graphics (most recent acquisition and stupidly fast); .... One - T42 4:3 15" Flexview 1.8GHz with ATI Graphics (still perfect for traveling); ... Two - T500 15.4" units both with ATI HD3650 Graphics.Hi eecon
It is considered fortunate that Lenovo provides newer driver for newer OS even after the system was phased out. From what I know, most of the OEM / manufacturers do not provide drivers for newer version of Windows when the product is phased out.
Furthermore, graphic card vendors (e.g. NVIDIA, Intel, AMD, etc.) oftenly release new drivers and it is hard for manufacturers to catch up with them. Usually, the purpose of OEM providing new driver is to resolve existing issues. If you need performance, get newer drivers directly from vendors website.
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
http://forums.lenovo.com/t5/General-Discussion/Dolby-Home-Theater-v4-for-most-Lenovo-Laptops/td-p/6...
http://forums.lenovo.com/t5/IdeaPad-Slate-Tablets/IdeaPad-Tablet-Sound-Enhancement-Thread/td-p/7150 -
Sever issue with Xorg and Nvidia Drivers
I run a 2.6.20 kernel with Xorg and Nvidia drivers all from arch rep on a Asus NV6200. Everything works fine, except one thing. When I exit X, the monitor shuts down imediatly. It wont start up at all, not even by manual startup. I cant understand what happens. The configuration is correct, is done with the correct settings for my video-card and monitor taken directly from the documentation. I cant use my X server at all since several days ... I checked the logs and there are no EE's. Anyway ... here is the log. Help anyone can help, I cant use X at all.
X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: UNKNOWN
Current Operating System: Linux solarflare 2.6.20-ARCH #1 SMP PREEMPT Fri Mar 16 20:22:11 CET 2007 i686
Build Date: 27 February 2007
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 21 03:26:45 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "AOC 7F+"
(**) | |-->Device "NVIDIA 6200"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
(**) FontPath set to:
/usr/share/fonts/misc
(==) RgbPath set to "/usr/share/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81c34a0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 1.1
X.Org XInput driver : 0.7
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 1.1
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3099 card 1106,3099 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b099 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0a:0: chip 1317,0985 card 1113,1216 rev 11 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1019,0996 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1019,0996 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1019,0996 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1019,0996 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1019,0996 rev 50 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 10de,0221 card 1043,820c rev a1 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xeaffffff (0x3000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) nVidia Corporation NV44A [GeForce 6200] rev 161, Mem @ 0xe8000000/24, 0xd0000000/28, 0xe9000000/24
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe7ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[1] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[2] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[3] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[4] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[5] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[6] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[7] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[9] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[10] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[11] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.2.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9755
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.9755
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.1.1, module version = 1.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.6
(II) NVIDIA dlloader X Driver 1.0-9755 Mon Feb 26 23:23:13 PST 2007
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="NVIDIA Corporation"
compiled for 7.1.99.2, module version = 1.0.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.2.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 1.1
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[12] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[13] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[14] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[15] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[16] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[17] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[5] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[6] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[7] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Enabling RENDER acceleration
(II) NVIDIA(0): NVIDIA GPU GeForce 6200 at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 05.44.a2.03.00
(II) NVIDIA(0): Detected AGP rate: 4X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 6200 at PCI:1:0:0:
(--) NVIDIA(0): AOC Spectrum7F (CRT-0)
(--) NVIDIA(0): AOC Spectrum7F (CRT-0): 400.0 MHz maximum pixel clock
(II) NVIDIA(0): Assigned Display Device: CRT-0
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "1024x768"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] 0 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b]
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[7] -1 0 0xeb021000 - 0xeb0210ff (0x100) MX[b]
[8] -1 0 0xeb020000 - 0xeb0203ff (0x400) MX[b]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[10] -1 0 0xe9000000 - 0xe9ffffff (0x1000000) MX[b](B)
[11] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[12] -1 0 0xe8000000 - 0xe8ffffff (0x1000000) MX[b](B)
[13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[18] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[b]
[19] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[b]
[20] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[b]
[21] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[b]
[22] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[b]
[23] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
[24] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[25] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) NVIDIA(0): Setting mode "1024x768"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "Auto"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "Auto"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc104"
(**) Keyboard1: XkbModel: "pc104"
(**) Option "XkbLayout" "us"
(**) Keyboard1: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(--) Mouse1: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse1: ps2EnableDataReporting: succeeded
FreeFontPath: FPE "/usr/share/fonts/misc" refcount is 2, should be 1; fixing.No ... the problem is in the kernel that comes precompiled.
I did this test.
The first time I installed the kernel I unloaded nvidiafb since I dont like it.
When I install nvidiafb back something strange happends. Nvidia module fails to load.
The modprobe sais it cannot find the device nvidia.ko ... but it is there!
So my best guess is, there is something with the kernel. Any ideas?
Problem resolved, installed older driver
Last edited by Nefer-Ra (2007-03-22 02:59:25) -
WinProducer2 start error, won't run with nVidia Capture drivers
I'm not having a good experience with the bundled WinProducer2 that came with my MX440VT8x-128.
If I have either of the versions of the nVidia capture-drivers that came on the card's CD (that's v. 1.16 or 1.18) installed, or the 1.22 version from nVidia's website (as of 2-20-03), and then try to start WinProducer, I get the same start-error every time:
"WinProducer.exe has generated errors and will be closed by Windows....need to restart program...an error log is being generated."
If I look at the Dr. Watson log, it says WinProducer 2 generated "Exception Violation c00005."
If I uninstall the nVidia capture-drivers, WinProducer2 opens right up just fine, but, of course, with no capture capability.
I downloaded and tried (after uninstalling v.2) WinProducer3 from InterVideo's website yesterday (2/20/03), with the exact same results! ???
Anybody else having this problem?
This is under Win2k, w/SP2, then added SP3, with no improvement.
StennAfter I made the original post, I tried a lot more things that didn't help:
I booted in safe mode and tried it but PSP gave an error message that it wouldn't run with the screen resolution that low (800x600); so it did try to run. So I booted normally and set the screen rez to 800x600 manually, then tried to run PSP and got the same error message.
I did a clean boot with all start-up programs and all services disabled; PSP still wouldn't run.
I disabled my anti-virus and PSP still wouldn't run.
Disabled my video card in the device manager and booted with my on-board video; PSP still wouldn't run.
There's never an error message as long as the screen rez is high enough; when I try to run it, it looks like it's starting to run but nothing ever happens. -
After effects instantly crashes while using opengl with nvidias new drivers 178.24
Since I installed nvidias new drivers 178.24, after effects instantly crashes while using opengl. Anyone else experienced this?
I have Geforce 8600 GT.
As a minor note, I had major problems with the new quicktime 7.5.5 update, both After effects and Premiere got problems with interpreting footage and frames here and there got the "missing frame" look. I also got more problems so I uninstalled it instantly. Is there a major problem with the update or a major problem with me?
Thanks
/ OlleI use Vista (in retroperspective this was probably a mistake, but the company wanted to test the capabilities with Vista when we bought the computer a year ago). And specs are:
*Graphics: Asus Extreme GeForce 8600GT SILENT 512MB DDR3 TV-out HDTV DUAL DVI RETAIL PCI Express
*HD: Samsung HD501LJ 500GB 7200rpm 16MB SATA2
*Audio: Creative Sound Blaster X-Fi Xtreme Audio Retail
*Mem: Corsair QUAD2X4096-6400C5DHX QuadDHX 4x1024MB (tot. 4096MB) Kit DDR2 XMS2-6400 800MHz
*Motherboard: Asus P5K iP35 4DDR2-DIMM 3PCI 3PCIe SATA Raid Audio GB-LAN Firewire Socket775 ATX
*Processor: Intel Core 2 EXTREME QUAD QX6850 3.0GHz 8MB FSB1333 Boxed (with cpu-cooler!) Socket 775
*Power: Sirtec/Chieftec CFT-750-14C 750W 140mm fan ATX2.0 20/24-pin 4/8-pin 12V Modular
Sorry not to give more info on the Quicktime problem, I don't remember exactly what more problems there where as we have had extremely much to do these last couple of weeks and I just freaked out and uninstalled it as soon as the problems emerged. I do remember the frame issue however, it was very clear, i imported an image sequence in premiere and everything worked fine, then i updated and frames were suddenly dropped, then i uninstalled and installed 7.5 again and it worked just fine. I also tried to flush the cache, restart and generally search for the source of the problem for a couple of hours.
/ Olle -
Nvidia-Beta drivers crash with Kernel 3.18.2
After the upgrade to kernel 3.18.2 I recompiled the NVIDIA-Beta drivers to discover that crashes in the kernel. Has anyone got any ideas on how to rectify this issue or have had similar problems?
Log is at the following link - http://pastebin.com/frfMi9qJ
And below is a tiny snippet
[ 15.933352] ------------[ cut here ]------------
[ 15.933363] WARNING: CPU: 0 PID: 663 at drivers/gpu/drm/drm_ioctl.c:143 drm_setversion+0x17e/0x190 [drm]()
[ 15.933393] No drm_driver.set_busid() implementation provided by nvidia_frontend_exit_module [nvidia]. Use drm_dev_set_unique() to set the unique name explicitly.
[ 15.933394] Modules linked in:
[ 15.933395] arc4 ecb md4 md5 hmac nls_utf8 cifs dns_resolver fscache tda18271 tda10048 cfg80211 rfkill snd_hda_codec_hdmi xpad ff_memless led_class mousedev joydev nvidia(PO) coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul saa7164(+) iTCO_wdt crc32_pclmul crc32c_intel iTCO_vendor_support ghash_clmulni_intel mxm_wmi evdev aesni_intel mac_hid tveeprom aes_x86_64 lrw dvb_core gf128mul alx glue_helper v4l2_common ablk_helper videodev cryptd drm psmouse tpm_tis media nuvoton_cir mdio tpm serio_raw rc_core battery video processor snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer mei_me snd i2c_i801 mei i2c_core soundcore lpc_ich shpchp wmi pcspkr button sch_fq_codel vboxdrv(O) sg ext4 crc16
[ 15.933420] mbcache jbd2 uvesafb hid_generic usbhid hid sr_mod cdrom sd_mod atkbd libps2 ahci libahci libata ehci_pci xhci_pci xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio
[ 15.933429] CPU: 0 PID: 663 Comm: Xorg.bin Tainted: P O 3.18.2-2-ARCH #1
[ 15.933430] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./Z87 Killer, BIOS P1.00 09/16/2013
[ 15.933431] 0000000000000000 00000000aa63387f ffff8807eb967c98 ffffffff8154f134
[ 15.933432] 0000000000000000 ffff8807eb967cf0 ffff8807eb967cd8 ffffffff81072bc1
[ 15.933433] ffff8807eb967f1c ffff8807eb967df0 ffff8807eb990000 ffff8807f295a780
[ 15.933435] Call Trace:
[ 15.933439] [<ffffffff8154f134>] dump_stack+0x4e/0x71
[ 15.933442] [<ffffffff81072bc1>] warn_slowpath_common+0x81/0xa0
[ 15.933444] [<ffffffff81072c35>] warn_slowpath_fmt+0x55/0x70
[ 15.933449] [<ffffffffa03f037e>] drm_setversion+0x17e/0x190 [drm]
[ 15.933451] [<ffffffff811de6b2>] ? path_openat+0xc2/0x6e0
[ 15.933455] [<ffffffffa03efe0c>] drm_ioctl+0x2cc/0x680 [drm]
[ 15.933458] [<ffffffffa03f0200>] ? drm_noop+0x40/0x40 [drm]
[ 15.933460] [<ffffffff811dfd59>] ? do_filp_open+0x49/0xd0
[ 15.933462] [<ffffffff811e23e0>] do_vfs_ioctl+0x2d0/0x4b0
[ 15.933463] [<ffffffff811df196>] ? final_putname+0x26/0x50
[ 15.933465] [<ffffffff811e2641>] SyS_ioctl+0x81/0xa0
[ 15.933468] [<ffffffff81554ca9>] system_call_fastpath+0x12/0x17
[ 15.933469] ---[ end trace 1f206c9a64b932eb ]---
[ 17.257683] ------------[ cut here ]------------ok, that worked.
but my x server will not start after downgrading linux kernel, nvidia and nvidia-utils. oO
looks like the known problem with the kernel and nvidia freeze. are there more packages that i have to downgrade? -
Using Linux with Nvidia binary drivers, how do I enable WebGL in Firefox 8?
I've heard it is possible to use WebGL in firefox 8 for linux if using Nvidia binary drivers, but I haven't found a succinct recipe. can someone point me to a working recipe?
thanks!You have a WebGL renderer listed on the Help > Troubleshooting Information page:
WebGL Renderer: NVIDIA Corporation -- GeForce 9800 GT/PCI/SSE2/3DNOW! -- 3.3.0 NVIDIA 280.13
You can check the values of the webgl prefs on the about:config page via the location bar.
*http://kb.mozillazine.org/about:config -
Why mplayer in i686 repository is not compiled with vdpau support?
I was kind of surprised when I find out that mplayer in i686 repository is not compiled with vdpau,
since it is in x86_64 repository,
I know I could enable vdpau easily by compiling the package myself,
but wouldn't it be even better if it is built-in in the official binary?I think that the dynamic loader would then search for libvdpau.so, and not find it on systems without nVidia-drivers, which causes the program to not load Also, it's not very KISS to have several different packages for different needs in the main repos. That's what AUR/ABS's for.
-
[Solved]Cannot startx on fresh install with xfce4 and nvidia-304xx-lts
I just installed Arch base onto my system with my Nvidia GTS 250 Graphics card, however I am unable to start a x session after installing xfce4 and nvidia-304xx-lts followed by the command nvidia-xconfig and reboot. When I try to issue startxfce4 I get an error pointing to /var/log/Xorg.0.log as follows
[ 24.856]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 24.857] X Protocol Version 11, Revision 0
[ 24.857] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 24.857] Current Operating System: Linux yte 3.16.2-1-ARCH #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014 x86_64
[ 24.857] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 24.857] Build Date: 31 July 2014 11:53:19AM
[ 24.857]
[ 24.857] Current version of pixman: 0.32.6
[ 24.858] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 24.858] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.858] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 17 21:49:53 2014
[ 24.875] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.875] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.897] (==) ServerLayout "Layout0"
[ 24.897] (**) |-->Screen "Screen0" (0)
[ 24.897] (**) | |-->Monitor "Monitor0"
[ 24.905] (**) | |-->Device "Device0"
[ 24.905] (**) |-->Input Device "Keyboard0"
[ 24.905] (**) |-->Input Device "Mouse0"
[ 24.905] (==) Automatically adding devices
[ 24.905] (==) Automatically enabling devices
[ 24.905] (==) Automatically adding GPU devices
[ 24.914] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 24.914] Entry deleted from font path.
[ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 24.914] Entry deleted from font path.
[ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 24.914] (==) FontPath set to:
/usr/share/fonts/misc/
[ 24.914] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.914] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 24.914] (WW) Disabling Keyboard0
[ 24.914] (WW) Disabling Mouse0
[ 24.914] (II) Loader magic: 0x818d80
[ 24.914] (II) Module ABI versions:
[ 24.914] X.Org ANSI C Emulation: 0.4
[ 24.914] X.Org Video Driver: 18.0
[ 24.914] X.Org XInput driver : 21.0
[ 24.914] X.Org Server Extension : 8.0
[ 24.917] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 24.918] (--) PCI:*(0:4:0:0) 10de:0615:19f1:0d76 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
[ 24.918] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.919] (II) LoadModule: "glx"
[ 24.953] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.974] (II) Module glx: vendor="NVIDIA Corporation"
[ 25.974] compiled for 4.0.2, module version = 1.0.0
[ 25.974] Module class: X.Org Server Extension
[ 25.974] (II) NVIDIA GLX Module 304.123 Wed Jul 2 11:19:55 PDT 2014
[ 25.974] (II) LoadModule: "nvidia"
[ 25.974] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 26.027] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 26.027] compiled for 4.0.2, module version = 1.0.0
[ 26.027] Module class: X.Org Video Driver
[ 26.042] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 26.042] (EE) NVIDIA: system's kernel log for additional error messages.
[ 26.042] (II) UnloadModule: "nvidia"
[ 26.042] (II) Unloading nvidia
[ 26.042] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 26.042] (EE) No drivers available.
[ 26.042] (EE)
Fatal server error:
[ 26.042] (EE) no screens found(EE)
[ 26.042] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 26.042] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 26.042] (EE)
It apears to be trying to load various modules, first of which is my propietary nvidia driver which refers to the kernel log. My dmesg looks like this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffadfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffae000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: HP-Pavilion FQ618AA-A2L a6734f/Benicia, BIOS 5.35 12/16/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff9ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcff9ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3798e000-0x37cbefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FC440 000014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 0x00000000CFFA0000 000044 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000CFFA0200 000084 (v02 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000CFFA0440 004E91 (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CFFAE000 000040
[ 0.000000] ACPI: APIC 0x00000000CFFA0390 00006C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000CFFA0400 00003C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000CFFAE040 000072 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CFFA52E0 000038 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x00000000CFFAE0C0 002024 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000CFFB00F0 000176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CFFB14B0 00082F (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fff7000-0x12fffbfff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xcff9ffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1048381
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13247 pages used for memmap
[ 0.000000] DMA32 zone: 847776 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffadfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffae000-0xcffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86784 r8192 d23808 u524288
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031977
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4046408K/4193524K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 147116K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2333.276 MHz processor
[ 0.006681] Calibrating delay loop (skipped), value calculated using timer frequency.. 4668.99 BogoMIPS (lpj=7777586)
[ 0.006685] pid_max: default: 32768 minimum: 301
[ 0.006695] ACPI: Core revision 20140424
[ 0.012534] ACPI: All ACPI Tables successfully acquired
[ 0.013368] Security Framework initialized
[ 0.013377] Yama: becoming mindful.
[ 0.013731] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017212] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.017970] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.017980] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.018300] Initializing cgroup subsys memory
[ 0.018326] Initializing cgroup subsys devices
[ 0.018334] Initializing cgroup subsys freezer
[ 0.018338] Initializing cgroup subsys net_cls
[ 0.018344] Initializing cgroup subsys blkio
[ 0.018375] CPU: Physical Processor ID: 0
[ 0.018376] CPU: Processor Core ID: 0
[ 0.018379] mce: CPU supports 6 MCE banks
[ 0.018387] CPU0: Thermal monitoring enabled (TM2)
[ 0.018394] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.018487] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.019569] ftrace: allocating 20434 entries in 80 pages
[ 0.027196] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060221] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (fam: 06, model: 17, stepping: 07)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.076742] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083412] x86: Booting SMP configuration:
[ 0.083415] .... node #0, CPUs: #1 #2 #3
[ 0.130014] x86: Booted up 1 node, 4 CPUs
[ 0.130018] smpboot: Total of 4 processors activated (18673.96 BogoMIPS)
[ 0.133346] devtmpfs: initialized
[ 0.136924] PM: Registering ACPI NVS region [mem 0xcffae000-0xcffdffff] (204800 bytes)
[ 0.137923] pinctrl core: initialized pinctrl subsystem
[ 0.137968] RTC time: 1:49:28, date: 09/18/14
[ 0.138025] NET: Registered protocol family 16
[ 0.138158] cpuidle: using governor ladder
[ 0.138160] cpuidle: using governor menu
[ 0.138185] ACPI: bus type PCI registered
[ 0.138187] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.138268] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.138270] PCI: not using MMCONFIG
[ 0.138272] PCI: Using configuration type 1 for base access
[ 0.153430] ACPI: Added _OSI(Module Device)
[ 0.153430] ACPI: Added _OSI(Processor Device)
[ 0.153430] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.153430] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.155075] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.157331] ACPI: Dynamic OEM Table Load:
[ 0.157338] ACPI: SSDT 0xFFFF880129AB7600 0001F3 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[ 0.157716] ACPI: Dynamic OEM Table Load:
[ 0.157721] ACPI: SSDT 0xFFFF880129AB7400 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158103] ACPI: Dynamic OEM Table Load:
[ 0.158109] ACPI: SSDT 0xFFFF8801295D4000 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158489] ACPI: Dynamic OEM Table Load:
[ 0.158494] ACPI: SSDT 0xFFFF8801295D4200 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158833] ACPI: Interpreter enabled
[ 0.158843] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.158857] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.158859] ACPI: Using IOAPIC for interrupt routing
[ 0.158879] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.159657] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.160132] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.165222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.165228] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.165233] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.165516] PCI host bridge to bus 0000:00
[ 0.165519] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.165522] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.165524] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.165526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.165528] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.165530] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[ 0.165532] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.165541] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.165640] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.165677] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.165716] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.165796] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.165844] pci 0000:00:1a.0: reg 0x20: [io 0xb400-0xb41f]
[ 0.165936] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.165991] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.166039] pci 0000:00:1a.1: reg 0x20: [io 0xb480-0xb49f]
[ 0.166130] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.166194] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.166216] pci 0000:00:1a.7: reg 0x10: [mem 0xf9efec00-0xf9efefff]
[ 0.166307] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.166350] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.166407] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.166427] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ef8000-0xf9efbfff 64bit]
[ 0.166516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.166616] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.166706] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.166752] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.166807] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.166899] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.166945] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.167003] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.167049] pci 0000:00:1d.0: reg 0x20: [io 0xb800-0xb81f]
[ 0.167139] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.167203] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.167250] pci 0000:00:1d.1: reg 0x20: [io 0xb880-0xb89f]
[ 0.167339] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.167392] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.167439] pci 0000:00:1d.2: reg 0x20: [io 0xbc00-0xbc1f]
[ 0.167528] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.167580] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.167627] pci 0000:00:1d.3: reg 0x20: [io 0xc000-0xc01f]
[ 0.167719] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.167782] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.167804] pci 0000:00:1d.7: reg 0x10: [mem 0xf9eff800-0xf9effbff]
[ 0.167895] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.167938] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.167989] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.168083] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.168135] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.168209] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.168214] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.168217] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.168328] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.168351] pci 0000:00:1f.2: reg 0x10: [io 0xc880-0xc887]
[ 0.168361] pci 0000:00:1f.2: reg 0x14: [io 0xc800-0xc803]
[ 0.168371] pci 0000:00:1f.2: reg 0x18: [io 0xc480-0xc487]
[ 0.168381] pci 0000:00:1f.2: reg 0x1c: [io 0xc400-0xc403]
[ 0.168390] pci 0000:00:1f.2: reg 0x20: [io 0xc080-0xc09f]
[ 0.168400] pci 0000:00:1f.2: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.168458] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.168549] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.168567] pci 0000:00:1f.3: reg 0x10: [mem 0xf9effc00-0xf9effcff 64bit]
[ 0.168592] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.168733] pci 0000:04:00.0: [10de:0615] type 00 class 0x030000
[ 0.168748] pci 0000:04:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.168761] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168774] pci 0000:04:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.168784] pci 0000:04:00.0: reg 0x24: [io 0xdc00-0xdc7f]
[ 0.168793] pci 0000:04:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.168906] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.168909] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.168912] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.168916] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168982] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.169127] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.169187] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.169296] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.169354] pci 0000:02:00.0: reg 0x20: [mem 0xf8ff0000-0xf8ffffff 64bit pref]
[ 0.169397] pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.169663] pci 0000:02:00.0: supports D1 D2
[ 0.169665] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169850] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.169855] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.169859] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.169866] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.169932] pci 0000:01:05.0: [11c1:5811] type 00 class 0x0c0010
[ 0.169949] pci 0000:01:05.0: reg 0x10: [mem 0xf9fff000-0xf9ffffff]
[ 0.170025] pci 0000:01:05.0: supports D1 D2
[ 0.170028] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.170112] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.170119] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.170126] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.170128] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.170131] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.170133] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.170135] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.170137] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.170715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.170769] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.170823] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.170875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.170927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.170983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.171036] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.171088] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.171151] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.171253] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.171253] vgaarb: loaded
[ 0.171253] vgaarb: bridge control possible 0000:04:00.0
[ 0.171253] PCI: Using ACPI for IRQ routing
[ 0.179597] PCI: pci_cache_line_size set to 64 bytes
[ 0.179658] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.179660] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
[ 0.179795] NetLabel: Initializing
[ 0.179797] NetLabel: domain hash size = 128
[ 0.179798] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.179813] NetLabel: unlabeled traffic allowed by default
[ 0.179835] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.179841] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.179845] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.181019] Switched to clocksource hpet
[ 0.187008] pnp: PnP ACPI init
[ 0.187030] ACPI: bus type PNP registered
[ 0.187128] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.187133] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.187213] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.187433] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.187436] system 00:02: [io 0x0800-0x087f] could not be reserved
[ 0.187438] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.187441] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.187444] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.187447] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187548] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.187551] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.187555] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187674] system 00:04: [io 0x0a00-0x0adf] has been reserved
[ 0.187678] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187756] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.187759] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187825] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.187829] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.188006] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.188009] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.188012] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.188014] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.188017] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.188133] pnp: PnP ACPI: found 8 devices
[ 0.188135] ACPI: bus type PNP unregistered
[ 0.197465] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.197469] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.197472] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.197491] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.197494] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.197497] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.197499] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.197505] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[ 0.197510] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197514] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.197516] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.197519] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.197522] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.197525] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197529] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.197532] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.197537] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
[ 0.197542] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197548] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.197551] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.197557] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.197561] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.197568] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.197573] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.197582] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.197585] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.197587] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.197589] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.197591] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.197593] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.197596] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.197598] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.197600] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197602] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.197604] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
[ 0.197607] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197609] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.197611] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.197613] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.197615] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.197618] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.197620] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.197622] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.197624] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.197626] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.197628] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.197657] NET: Registered protocol family 2
[ 0.197878] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.197999] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.198159] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.198193] TCP: reno registered
[ 0.198203] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.198230] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.198298] NET: Registered protocol family 1
[ 0.199202] pci 0000:04:00.0: Boot video device
[ 0.199211] PCI: CLS 32 bytes, default 64
[ 0.199266] Unpacking initramfs...
[ 0.265035] Freeing initrd memory: 3268K (ffff88003798e000 - ffff880037cbf000)
[ 0.265050] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.265053] software IO TLB [mem 0xcbfa0000-0xcffa0000] (64MB) mapped at [ffff8800cbfa0000-ffff8800cff9ffff]
[ 0.265383] Scanning for low memory corruption every 60 seconds
[ 0.265750] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.266220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.268226] zbud: loaded
[ 0.268426] VFS: Disk quotas dquot_6.5.2
[ 0.268472] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.268644] msgmni has been set to 7909
[ 0.268709] Key type big_key registered
[ 0.269063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.269162] io scheduler noop registered
[ 0.269165] io scheduler deadline registered
[ 0.269227] io scheduler cfq registered (default)
[ 0.269402] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.269456] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.269523] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.269664] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.269772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.269794] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.269839] intel_idle: does not run on family 6 model 23
[ 0.269876] GHES: HEST is not enabled!
[ 0.269980] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.270599] Linux agpgart interface v0.103
[ 0.270658] rtc_cmos 00:01: RTC can wake from S4
[ 0.270820] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.270850] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.270864] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.270984] TCP: cubic registered
[ 0.271114] NET: Registered protocol family 10
[ 0.271372] NET: Registered protocol family 17
[ 0.271821] registered taskstats version 1
[ 0.272365] Magic number: 14:261:812
[ 0.272465] rtc_cmos 00:01: setting system clock to 2014-09-18 01:49:28 UTC (1411004968)
[ 0.272539] PM: Hibernation image not present or could not be loaded.
[ 0.273767] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 0.273769] Write protecting the kernel read-only data: 8192k
[ 0.276140] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 0.277248] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 0.284774] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.286420] systemd-udevd[59]: starting version 216
[ 0.299539] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.302475] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.302536] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.305975] ACPI: bus type USB registered
[ 0.306007] usbcore: registered new interface driver usbfs
[ 0.306020] usbcore: registered new interface driver hub
[ 0.306135] usbcore: registered new device driver usb
[ 0.306716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.307076] ehci-pci: EHCI PCI platform driver
[ 0.307191] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.307253] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.307261] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.307274] ehci-pci 0000:00:1a.7: debug port 1
[ 0.311183] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.311202] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9efec00
[ 0.315748] SCSI subsystem initialized
[ 0.317397] libata version 3.00 loaded.
[ 0.320025] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.323598] hub 1-0:1.0: USB hub found
[ 0.323608] hub 1-0:1.0: 4 ports detected
[ 0.323904] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.323911] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.323925] ehci-pci 0000:00:1d.7: debug port 1
[ 0.327815] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.327834] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9eff800
[ 0.336696] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.336926] hub 2-0:1.0: USB hub found
[ 0.336936] hub 2-0:1.0: 8 ports detected
[ 0.337334] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.337345] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.337354] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.337394] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
[ 0.337866] hub 3-0:1.0: USB hub found
[ 0.337875] hub 3-0:1.0: 2 ports detected
[ 0.338094] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.338100] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.338107] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.338134] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
[ 0.338347] hub 4-0:1.0: USB hub found
[ 0.338355] hub 4-0:1.0: 2 ports detected
[ 0.338546] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.338553] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.338559] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.338578] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
[ 0.338786] hub 5-0:1.0: USB hub found
[ 0.338794] hub 5-0:1.0: 2 ports detected
[ 0.338981] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.338987] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.338993] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.339020] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
[ 0.339235] hub 6-0:1.0: USB hub found
[ 0.339244] hub 6-0:1.0: 2 ports detected
[ 0.339429] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.339435] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.339442] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.339460] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
[ 0.339667] hub 7-0:1.0: USB hub found
[ 0.339675] hub 7-0:1.0: 2 ports detected
[ 0.339862] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.339870] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.339876] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.339894] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
[ 0.340109] hub 8-0:1.0: USB hub found
[ 0.340117] hub 8-0:1.0: 2 ports detected
[ 0.340263] ahci 0000:00:1f.2: version 3.0
[ 0.340410] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.340467] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.340515] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.340519] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.366734] firewire_ohci 0000:01:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 0.374399] scsi0 : ahci
[ 0.374615] scsi1 : ahci
[ 0.374814] scsi2 : ahci
[ 0.375005] scsi3 : ahci
[ 0.375196] scsi4 : ahci
[ 0.375388] scsi5 : ahci
[ 0.375468] ata1: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 43
[ 0.375472] ata2: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 43
[ 0.375474] ata3: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 43
[ 0.375477] ata4: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 43
[ 0.375480] ata5: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 43
[ 0.375482] ata6: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 43
[ 0.630034] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 0.693360] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.754296] hub 1-2:1.0: USB hub found
[ 0.754373] hub 1-2:1.0: 7 ports detected
[ 0.866772] firewire_core 0000:01:05.0: created device fw0: GUID 001e8c0001bb0f0a, S400
[ 1.013360] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.266684] tsc: Refined TSC clocksource calibration: 2333.285 MHz
[ 1.333363] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.336819] ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
[ 1.336823] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.340399] ata3.00: configured for UDMA/133
[ 1.340517] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB50 PQ: 0 ANSI: 5
[ 1.373365] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 1.500038] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 1.500227] scsi6 : usb-storage 2-5:1.0
[ 1.500322] usbcore: registered new interface driver usb-storage
[ 1.500694] usbcore: registered new interface driver uas
[ 1.660027] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.980028] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 1.980030] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.125620] usb 5-1: config 1 has an invalid descriptor of length 17, skipping remainder of the config
[ 2.125624] usb 5-1: config 1 has 1 interface, different from the descriptor's value: 4
[ 2.125628] usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor's value: 2
[ 2.266750] Switched to clocksource tsc
[ 2.370018] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.504151] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.504778] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.505402] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.506038] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.509294] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.509340] sd 2:0:0:0: [sda] Write Protect is off
[ 2.509343] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.509363] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.515260] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2.515889] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 2.516511] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 2.517136] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 2.569106] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.569597] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.571450] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.586591] usbcore: registered new interface driver usbhid
[ 2.586594] usbhid: USB HID core driver
[ 2.587316] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:046D:C24A.0001/input/input2
[ 2.587394] hid-generic 0003:046D:C24A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input0
[ 2.620024] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.621301] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:046D:C24A.0002/input/input3
[ 2.621413] hid-generic 0003:046D:C24A.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input1
[ 2.623705] ata6.00: ATAPI: HL-DT-ST BDDVDRW GBC-H20L, 1.B8, max UDMA/100
[ 2.628682] ata6.00: configured for UDMA/100
[ 2.741224] scsi 5:0:0:0: CD-ROM HL-DT-ST BDDVDRW GBC-H20L 1.B8 PQ: 0 ANSI: 5
[ 2.796696] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 2.870295] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.870300] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.870508] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.983435] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.0/0003:046D:C318.0003/input/input4
[ 2.983518] hid-generic 0003:046D:C318.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input0
[ 2.987055] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.1/0003:046D:C318.0004/input/input5
[ 2.987190] hid-generic 0003:046D:C318.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input1
[ 3.173499] usb 1-2.7: new high-speed USB device number 4 using ehci-pci
[ 3.257551] hub 1-2.7:1.0: USB hub found
[ 3.257622] hub 1-2.7:1.0: 4 ports detected
[ 3.316702] floppy0: no floppy controllers found
[ 3.830625] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.027733] random: nonblocking pool is initialized
[ 4.403265] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 4.403452] systemd[1]: Detected architecture 'x86-64'.
[ 4.434571] systemd[1]: Set hostname to <yte>.
[ 5.263934] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.264264] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.264322] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.264334] systemd[1]: Starting Remote File Systems.
[ 5.264630] systemd[1]: Reached target Remote File Systems.
[ 5.264663] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.265007] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.265025] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.265058] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.265067] systemd[1]: Starting Paths.
[ 5.265331] systemd[1]: Reached target Paths.
[ 5.265342] systemd[1]: Starting Encrypted Volumes.
[ 5.265614] systemd[1]: Reached target Encrypted Volumes.
[ 5.265625] systemd[1]: Expecting device dev-sda3.device...
[ 5.265819] systemd[1]: Expecting device dev-sda6.device...
[ 5.266013] systemd[1]: Starting Root Slice.
[ 5.275815] systemd[1]: Created slice Root Slice.
[ 5.275829] systemd[1]: Starting User and Session Slice.
[ 5.276279] systemd[1]: Created slice User and Session Slice.
[ 5.276291] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.276593] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.276604] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.276899] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.276910] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.277203] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.277213] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.277507] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.277518] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.277808] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.277824] systemd[1]: Starting udev Kernel Socket.
[ 5.278109] systemd[1]: Listening on udev Kernel Socket.
[ 5.278123] systemd[1]: Starting udev Control Socket.
[ 5.278410] systemd[1]: Listening on udev Control Socket.
[ 5.278424] systemd[1]: Starting Journal Socket.
[ 5.278716] systemd[1]: Listening on Journal Socket.
[ 5.278736] systemd[1]: Starting System Slice.
[ 5.279185] systemd[1]: Created slice System Slice.
[ 5.279201] systemd[1]: Starting File System Check on Root Device...
[ 5.279858] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.280411] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.371945] systemd[1]: Mounting Temporary Directory...
[ 5.379927] systemd[1]: Starting system-getty.slice.
[ 5.380442] systemd[1]: Created slice system-getty.slice.
[ 5.414498] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.477478] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.477515] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.503309] systemd[1]: Started Load Kernel Modules.
[ 5.503363] systemd[1]: Starting Apply Kernel Variables...
[ 5.504202] systemd[1]: Mounting Configuration File System...
[ 5.504898] systemd[1]: Mounted FUSE Control File System.
[ 5.504935] systemd[1]: Mounting Huge Pages File System...
[ 5.505656] systemd[1]: Mounting Debug File System...
[ 5.506353] systemd[1]: Starting Setup Virtual Console...
[ 5.507155] systemd[1]: Starting udev Coldplug all Devices...
[ 5.507863] systemd[1]: Starting Journal Service...
[ 5.508912] systemd[1]: Started Journal Service.
[ 5.600542] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 5.836201] systemd-udevd[175]: starting version 216
[ 6.237023] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 6.237029] ACPI: Power Button [PWRB]
[ 6.237089] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 6.237092] ACPI: Power Button [PWRF]
[ 6.393110] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140424/utaddress-258)
[ 6.393118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.393146] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.403316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.624551] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.697197] sound hdaudioC0D0: ALC1200: SKU not ready 0x411111f0
[ 6.697713] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.697715] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.697718] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.697720] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.697722] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 6.697724] sound hdaudioC0D0: inputs:
[ 6.697726] sound hdaudioC0D0: Front Mic=0x19
[ 6.697729] sound hdaudioC0D0: Rear Mic=0x18
[ 6.697731] sound hdaudioC0D0: Line=0x1c
[ 6.697732] sound hdaudioC0D0: dig-in=0x1f
[ 6.702189] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 6.709310] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.717944] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
[ 6.718325] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.718367] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.718409] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.718451] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.718493] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 6.718576] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.718699] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.718743] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.728756] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x705
[ 6.780564] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 6.802218] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.802227] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.802531] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[ 6.802745] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90010736000, 00:24:8c:13:67:78, XID 1c4000c0 IRQ 45
[ 6.802748] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.815163] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x705
[ 6.815200] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x705
[ 6.815216] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x705
[ 6.815650] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.852178] iTCO_vendor_support: vendor-support=0
[ 6.951618] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.951664] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 6.952163] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.961276] systemd-udevd[183]: renamed network interface eth0 to enp2s0
[ 6.962065] mousedev: PS/2 mouse device common for all mice
[ 7.539521] Adding 4051964k swap on /dev/sda3. Priority:-1 extents:1 across:4051964k FS
[ 8.405763] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.687024] systemd-journald[157]: Received request to flush runtime journal from PID 1
[ 9.356701] floppy0: no floppy controllers found
[ 10.274611] r8169 0000:02:00.0 enp2s0: link down
[ 10.274665] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 11.871962] r8169 0000:02:00.0 enp2s0: link up
[ 11.871971] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
Due to the length of the above logs I looked for a option to upload them but could not find the button for this, my appologies. Would anyone be able to see where I am going wrong?
Last edited by meschael (2014-09-18 04:16:08)The first code block contains my Xorg.0.log however I just tryed modprove nvidia and recieved FATAL: Module nvidia not found. which I discovered was solved by someone here https://bbs.archlinux.org/viewtopic.php?pid=961852 however when I tryed to do a pacman -S nvidia nvidia-utils I get a unresolved confilict with nvidia-304xx-utils which after trying to remove with pacman -Rs shows dependencies with cario, Im not sure how far back I should start removing things to solve this conflict or how to go abouts solving it
+++++++++
Update: Solved
+++++++++
I did some more looking and found I could force the uninstall of nvidia-304xx-lts with pacman -Rdds nvidia-304xx-lts and after revisiting the Nvidia page on the wiki for the dozenth time I started thinking maybe I needed nvidia-304xx oposed to the lts release as google as kindly pointed out lts is long term support and maybe my kernel was not lts and thus conflicting. This turned out to be the case, after removing the ofending lts version of the driver, replacing with the correct nvidia-304xx , another nvidia-xconfig and reboot followed by modprobe nvida and startxfce4 my wounderfull xfce is now running as I type this messsage in firefox. Thank you for you help, as you asking about the modprobe output caused the chain of events leading to the success.
Last edited by meschael (2014-09-18 04:15:30) -
[solved] can't find/build mplayer with vdpau codec support
I want to install an mplayer that will handle vdpau.
I installed the standard mplayer version but that didn't have it.
Following some advice in another thread I rebuilt the standard mplayer with yaourt.
When I do 'mplayer -vo help' it shows a vdpau driver on the list. But when I do 'mplayer -vc help' there are no vdpau codecs listed.
I tried the same thing with mplayer-svn but get the same results.
I even tried compiling mplayer manually but get the same results.
What am I doing wrong?
TIA, gabu
(I have just moved to Archlinux64 after 3 years with Gentoo, so my Gentoo experience might be getting in the way)
Last edited by gabu (2009-08-10 18:59:50)xstaticxgpx:
Yes, you are right. This is what I get:
sh-4.0$ mplayer -vo help
MPlayer SVN-r29411-4.4.1 (C) 2000-2009 MPlayer Team
Available video output drivers:
ID_VIDEO_OUTPUTS
vdpau VDPAU with X11
xv X11/Xv
x11 X11 ( XImage/Shm )
xover General X11 driver for overlay capable video output drivers
gl X11 (OpenGL)
gl2 X11 (OpenGL) - multiple textures version
dga DGA ( Direct Graphic Access V2.0 )
sdl SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!)
fbdev Framebuffer Device
fbdev2 Framebuffer Device
aa AAlib
caca libcaca
v4l2 V4L2 MPEG Video Decoder Output
xvidix X11 (VIDIX)
cvidix console VIDIX
null Null video output
mpegpes MPEG-PES to DVB card
yuv4mpeg yuv4mpeg output for mjpegtools
png PNG file
jpeg JPEG file
gif89a animated GIF output
tga Targa output
pnm PPM/PGM/PGMYUV file
md5sum md5sum of each frame
129 audio & 258 video codecs
ID_EXIT=NONE
sh-4.0$ mplayer -vc help
MPlayer SVN-r29411-4.4.1 (C) 2000-2009 MPlayer Team
129 audio & 258 video codecs
Available video codecs:
ID_VIDEO_CODECS
vc: vfm: status: info: [lib/dll]
coreserve dshowserver working CoreAVC DShow H264 decoder 1.8 for x86 - http://corecodec.org/ [CoreAVCDecoder.ax]
ffmvi1 ffmpeg working FFmpeg Motion Pixels Decoder [motionpixels]
ffmdec ffmpeg working FFmpeg Sony PlayStation MDEC (Motion DECoder) [mdec]
ffsiff ffmpeg working FFmpeg Beam Software SIFF decoder [vb]
ffmimic ffmpeg working FFmpeg Mimic video [mimic]
ffkmvc ffmpeg working FFmpeg Karl Morton Video Codec [kmvc]
ffzmbv ffmpeg working FFmpeg Zip Motion-Block Video [zmbv]
zmbv vfw working Zip Motion-Block Video [zmbv.dll]
mpegpes mpegpes working MPEG-PES output (.mpg or DXR3/IVTV/DVB/V4L2 card)
ffmpeg1 ffmpeg working FFmpeg MPEG-1 [mpeg1video]
ffmpeg2 ffmpeg working FFmpeg MPEG-2 [mpeg2video]
ffmpeg12 ffmpeg working FFmpeg MPEG-1/2 [mpegvideo]
mpeg12 libmpeg2 working MPEG-1 or 2 (libmpeg2)
ffmpeg12mc ffmpeg problems FFmpeg MPEG-1/2 (XvMC) [mpegvideo_xvmc]
ffnuv ffmpeg working NuppelVideo [nuv]
nuv nuv working NuppelVideo
ffbmp ffmpeg working FFmpeg BMP decoder [bmp]
ffgif ffmpeg working FFmpeg GIF decoder [gif]
fftiff ffmpeg working FFmpeg TIFF decoder [tiff]
ffpcx ffmpeg working FFmpeg PCX decoder [pcx]
ffpng ffmpeg working FFmpeg PNG decoder [png]
mpng mpng working PNG image decoder [libpng]
ffptx ffmpeg working FFmpeg V.Flash PTX decoder [ptx]
fftga ffmpeg untested FFmpeg TGA decoder [targa]
mtga mtga working TGA image decoder
sgi sgi working SGI image decoder
ffsunras ffmpeg working FFmpeg SUN Rasterfile decoder [sunrast]
ffindeo3 ffmpeg working FFmpeg Intel Indeo 3.1/3.2 [indeo3]
fffli ffmpeg working Autodesk FLI/FLC Animation [flic]
ffaasc ffmpeg working Autodesk RLE decoder [aasc]
ffloco ffmpeg working LOCO video decoder [loco]
ffqtrle ffmpeg working QuickTime Animation (RLE) [qtrle]
ffrpza ffmpeg working QuickTime Apple Video [rpza]
ffsmc ffmpeg working Apple Graphics (SMC) codec [smc]
ff8bps ffmpeg working Planar RGB (Photoshop) [8bps]
ffcyuv ffmpeg working Creative YUV (libavcodec) [cyuv]
ffmsrle ffmpeg working Microsoft RLE [msrle]
ffroqvideo ffmpeg working Id RoQ File Video Decoder [roqvideo]
lzo lzo working LZO compressed [liblzo]
theora theora working Theora (free, reworked VP3) [libtheora]
msuscls vfw working MSU Screen Capture Lossless Codec [SCLS.DLL]
cram vfw problems Microsoft Video 1 [msvidc32.dll]
ffcvid ffmpeg working Cinepak Video (native codec) [cinepak]
cvidvfw vfw working Cinepak Video [iccvid.dll]
huffyuv vfw problems HuffYUV [huffyuv.dll]
ffvideo1 ffmpeg working Microsoft Video 1 (native codec) [msvideo1]
ffmszh ffmpeg working AVImszh (native codec) [mszh]
ffzlib ffmpeg working AVIzlib (native codec) [zlib]
cvidxa xanim problems XAnim's Radius Cinepak Video [vid_cvid.xa]
ffhuffyuv ffmpeg working FFmpeg HuffYUV [huffyuv]
ffv1 ffmpeg working FFV1 (lossless codec) [ffv1]
ffsnow ffmpeg working FFSNOW (Michael's wavelet codec) [snow]
ffasv1 ffmpeg working FFmpeg ASUS V1 [asv1]
ffasv2 ffmpeg working FFmpeg ASUS V2 [asv2]
ffvcr1 ffmpeg working FFmpeg ATI VCR1 [vcr1]
ffcljr ffmpeg working FFmpeg Cirrus Logic AccuPak (CLJR) [cljr]
ffsvq1 ffmpeg working FFmpeg Sorenson Video v1 (SVQ1) [svq1]
ff4xm ffmpeg working FFmpeg 4XM video [4xm]
ffvixl ffmpeg working Miro/Pinnacle VideoXL codec [xl]
ffqtdrw ffmpeg working QuickDraw native decoder [qdraw]
ffindeo2 ffmpeg working Indeo 2 native decoder [indeo2]
ffflv ffmpeg working FFmpeg Flash video [flv]
fffsv ffmpeg working FFmpeg Flash Screen video [flashsv]
ffdivx ffmpeg working FFmpeg DivX ;-) (MSMPEG-4 v3) [msmpeg4]
ffmp42 ffmpeg working FFmpeg MSMPEG-4 v2 [msmpeg4v2]
ffmp41 ffmpeg working FFmpeg MSMPEG-4 v1 [msmpeg4v1]
ffwmv1 ffmpeg working FFmpeg WMV1/WMV7 [wmv1]
ffwmv2 ffmpeg working FFmpeg WMV2/WMV8 [wmv2]
ffwmv3 ffmpeg problems FFmpeg WMV3/WMV9 [wmv3]
ffvc1 ffmpeg problems FFmpeg WVC1 [vc1]
ffh264 ffmpeg working FFmpeg H.264 [h264]
ffsvq3 ffmpeg working FFmpeg Sorenson Video v3 (SVQ3) [svq3]
ffodivx ffmpeg working FFmpeg MPEG-4 [mpeg4]
ffwv1f ffmpeg working WV1F MPEG-4 [mpeg4]
fflibschroedinger ffmpeg working Dirac (through FFmpeg libschroedinger) [libschroedinger]
fflibdirac ffmpeg working Dirac (through FFmpeg libdirac) [libdirac]
xvid xvid working Xvid (MPEG-4) [libxvidcore.a]
divx4vfw vfw problems DivX4Windows-VFW [divx.dll]
divxds dshow working DivX ;-) (MSMPEG-4 v3) [divx_c32.ax]
divx vfw working DivX ;-) (MSMPEG-4 v3) [divxc32.dll]
mpeg4ds dshow working Microsoft MPEG-4 v1/v2 [mpg4ds32.ax]
mpeg4 vfw working Microsoft MPEG-4 v1/v2 [mpg4c32.dll]
wmv9dmo dmo working Windows Media Video 9 DMO [wmv9dmod.dll]
wmvdmo dmo working Windows Media Video DMO [wmvdmod.dll]
wmv8 dshow working Windows Media Video 8 [wmv8ds32.ax]
wmv7 dshow working Windows Media Video 7 [wmvds32.ax]
wmvadmo dmo working Windows Media Video Adv DMO [wmvadvd.dll]
wmvvc1dmo dmo working Windows Media Video (VC-1) Advanced Profile Decoder [wvc1dmod.dll]
wmsdmod dmo working Windows Media Screen Codec 2 [wmsdmod.dll]
ubmp4 vfw problems UB Video MPEG-4 [ubvmp4d.dll]
zrmjpeg zrmjpeg problems Zoran MJPEG passthrough
ffmjpeg ffmpeg working FFmpeg MJPEG decoder [mjpeg]
ffmjpegb ffmpeg working FFmpeg MJPEG-B decoder [mjpegb]
ijpg ijpg working Independent JPEG Group's codec [libjpeg]
m3jpeg vfw working Morgan Motion JPEG Codec [m3jpeg32.dll]
mjpeg vfw working MainConcept Motion JPEG [mcmjpg32.dll]
avid vfw working AVID Motion JPEG [AvidAVICodec.dll]
LEAD vfw working LEAD (M)JPEG [LCodcCMP.dll]
imagepower vfw problems ImagePower MJPEG2000 [jp2avi.dll]
m3jpeg2k vfw working Morgan MJPEG2000 [m3jp2k32.dll]
m3jpegds dshow crashing Morgan MJPEG [m3jpegdec.ax]
pegasusm vfw crashing Pegasus Motion JPEG [pvmjpg21.dll]
pegasusl vfw crashing Pegasus lossless JPEG [pvljpg20.dll]
pegasusmwv vfw crashing Pegasus Motion Wavelet 2000 [pvwv220.dll]
vivo vfw working Vivo H.263 [ivvideo.dll]
u263 dshow working UB Video H.263/H.263+/H.263++ Decoder [ubv263d+.ax]
i263 vfw working I263 [i263_32.drv]
ffi263 ffmpeg working FFmpeg I263 decoder [h263i]
ffh263 ffmpeg working FFmpeg H.263+ decoder [h263]
ffzygo ffmpeg untested FFmpeg ZyGo [h263]
h263xa xanim crashing XAnim's CCITT H.263 [vid_h263.xa]
ffh261 ffmpeg working CCITT H.261 [h261]
qt261 qtvideo working QuickTime H.261 video decoder [QuickTime.qts]
h261xa xanim problems XAnim's CCITT H.261 [vid_h261.xa]
m261 vfw untested M261 [msh261.drv]
indeo5ds dshow working Intel Indeo 5 [ir50_32.dll]
indeo5 vfwex working Intel Indeo 5 [ir50_32.dll]
indeo4 vfw working Intel Indeo 4.1 [ir41_32.dll]
indeo3 vfwex working Intel Indeo 3.1/3.2 [ir32_32.dll]
indeo5xa xanim working XAnim's Intel Indeo 5 [vid_iv50.xa]
indeo4xa xanim working XAnim's Intel Indeo 4.1 [vid_iv41.xa]
indeo3xa xanim working XAnim's Intel Indeo 3.1/3.2 [vid_iv32.xa]
qdv dshow working Sony Digital Video (DV) [qdv.dll]
ffdv ffmpeg working FFmpeg DV decoder [dvvideo]
libdv libdv working Raw DV decoder (libdv) [libdv.so.2]
mcdv vfw working MainConcept DV Codec [mcdvd_32.dll]
3ivXxa xanim working XAnim's 3ivx Delta 3.5 plugin [vid_3ivX.xa]
3ivX dshow working 3ivx Delta 4.5 [3ivxDSDecoder.ax]
rv3040 realvid working Linux RealPlayer 10 RV30/40 decoder [drvc.so]
rv3040win realvid working Win32 RealPlayer 10 RV30/40 decoder [drvc.dll]
rv40 realvid working Linux RealPlayer 9 RV40 decoder [drv4.so.6.0]
rv40win realvid working Win32 RealPlayer 9 RV40 decoder [drv43260.dll]
rv40mac realvid working Mac OS X RealPlayer 9 RV40 decoder [drvc.bundle/Contents/MacOS/drvc]
rv30 realvid working Linux RealPlayer 8 RV30 decoder [drv3.so.6.0]
rv30win realvid working Win32 RealPlayer 8 RV30 decoder [drv33260.dll]
rv30mac realvid working Mac OS X RealPlayer 9 RV30 decoder [drvc.bundle/Contents/MacOS/drvc]
ffrv20 ffmpeg working FFmpeg RV20 decoder [rv20]
rv20 realvid working Linux RealPlayer 8 RV20 decoder [drv2.so.6.0]
rv20winrp10 realvid working Win32 RealPlayer 10 RV20 decoder [drv2.dll]
rv20win realvid working Win32 RealPlayer 8 RV20 decoder [drv23260.dll]
rv20mac realvid working Mac OS X RealPlayer 9 RV20 decoder [drv2.bundle/Contents/MacOS/drv2]
ffrv10 ffmpeg working FFmpeg RV10 decoder [rv10]
alpary dshow working Alparysoft lossless codec dshow [aslcodec_dshow.dll]
alpary2 vfw working Alparysoft lossless codec vfw [aslcodec_vfw.dll]
LEADMW20 dshow working Lead CMW wavelet 2.0 [LCODCCMW2E.dll]
lagarith vfw working Lagarith Lossless Video Codec [lagarith.dll]
psiv vfw working Infinite Video PSI_V [psiv.dll]
canopushq vfw working Canopus HQ Codec [CUVCcodc.dll]
canopusll vfw working Canopus Lossless Codec [CLLCcodc.dll]
ffvp3 ffmpeg untested FFmpeg VP3 [vp3]
fftheora ffmpeg untested FFmpeg Theora [theora]
vp3 vfwex working On2 Open Source VP3 Codec [vp31vfw.dll]
vp4 vfwex working On2 VP4 Personal Codec [vp4vfw.dll]
ffvp5 ffmpeg working FFmpeg VP5 decoder [vp5]
vp5 vfwex working On2 VP5 Personal Codec [vp5vfw.dll]
ffvp6 ffmpeg working FFmpeg VP6 decoder [vp6]
ffvp6a ffmpeg untested FFmpeg VP6A decoder [vp6a]
ffvp6f ffmpeg working FFmpeg VP6 Flash decoder [vp6f]
vp6 vfwex working On2 VP6 Personal Codec [vp6vfw.dll]
vp7 vfwex working On2 VP7 Personal Codec [vp7vfw.dll]
mwv1 vfw working Motion Wavelets [icmw_32.dll]
asv2 vfw working ASUS V2 [asusasv2.dll]
asv1 vfw working ASUS V1 [asusasvd.dll]
ffultimotion ffmpeg working IBM Ultimotion native decoder [ultimotion]
ultimotion vfw working IBM Ultimotion [ultimo.dll]
mss1 dshow working Windows Screen Video [msscds32.ax]
ucod vfw working UCOD-ClearVideo [clrviddd.dll]
vcr2 vfw working ATI VCR-2 [ativcr2.dll]
CJPG vfw working CJPG [CtWbJpg.DLL]
ffduck ffmpeg working Duck Truemotion1 [truemotion1]
fftm20 ffmpeg working FFmpeg Duck/On2 TrueMotion 2.0 [truemotion2]
tm20 dshow working TrueMotion 2.0 [tm20dec.ax]
ffamv ffmpeg working Modified MJPEG, used in AMV files [amv]
ffsp5x ffmpeg working SP5x codec - used by Aiptek MegaCam [sp5x]
sp5x vfw working SP5x codec - used by Aiptek MegaCam [sp5x_32.dll]
vivd2 vfw working SoftMedia ViVD V2 codec VfW [ViVD2.dll]
winx vfwex working Winnov Videum winx codec [wnvwinx.dll]
ffwnv1 ffmpeg working FFmpeg wnv1 native codec [wnv1]
wnv1 vfwex working Winnov Videum wnv1 codec [wnvplay1.dll]
vdom vfw working VDOWave codec [vdowave.drv]
lsv vfw working Vianet Lsvx Video Decoder [lsvxdec.dll]
ffvmnc ffmpeg working FFmpeg VMware video [vmnc]
vmnc vfw working VMware video [vmnc.dll]
ffsmkvid ffmpeg working FFmpeg Smacker Video [smackvid]
ffcavs ffmpeg working Chinese AVS Video [cavs]
ffdnxhd ffmpeg working FFmpeg DNxHD decoder [dnxhd]
qt3ivx qtvideo working win32/quicktime 3IV1 (3ivx) decoder [3ivx Delta 3.5.qtx]
qtactl qtvideo working Win32/QuickTime Streambox ACT-L2 [ACTLComponent.qtx]
qtavui qtvideo working Win32/QuickTime Avid Meridien Uncompressed [AvidQTAVUICodec.qtx]
qth263 qtvideo crashing Win32/QuickTime H.263 decoder [QuickTime.qts]
qtrlerpza qtvideo crashing Win32/Quicktime RLE/RPZA decoder [QuickTime.qts]
qtvp3 qtvideo crashing Win32/QuickTime VP3 decoder [On2_VP3.qtx]
qtzygo qtvideo problems win32/quicktime ZyGo decoder [ZyGoVideo.qtx]
qtbhiv qtvideo untested Win32/QuickTime BeHereiVideo decoder [BeHereiVideo.qtx]
qtcvid qtvideo working Win32/QuickTime Cinepak decoder [QuickTime.qts]
qtindeo qtvideo crashing Win32/QuickTime Indeo decoder [QuickTime.qts]
qtmjpeg qtvideo crashing Win32/QuickTime MJPEG decoder [QuickTime.qts]
qtmpeg4 qtvideo crashing Win32/QuickTime MPEG-4 decoder [QuickTime.qts]
qtsvq3 qtvideo working Win32/QuickTime SVQ3 decoder [QuickTimeEssentials.qtx]
qtsvq1 qtvideo problems Win32/QuickTime SVQ1 decoder [QuickTime.qts]
vsslight vfw working VSS Codec Light [vsslight.dll]
vssh264 dshow working VSS H.264 New [vsshdsd.dll]
vssh264old vfw working VSS H.264 Old [vssh264.dll]
vsswlt vfw working VSS Wavelet Video Codec [vsswlt.dll]
zlib vfw working AVIzlib [avizlib.dll]
mszh vfw working AVImszh [avimszh.dll]
alaris vfwex crashing Alaris VideoGramPiX [vgpix32d.dll]
vcr1 vfw crashing ATI VCR-1 [ativcr1.dll]
pim1 vfw crashing Pinnacle Hardware MPEG-1 [pclepim1.dll]
qpeg vfw working Q-Team's QPEG (www.q-team.de) [qpeg32.dll]
rricm vfw crashing rricm [rricm.dll]
ffcamtasia ffmpeg working TechSmith Camtasia Screen Codec (native) [camtasia]
camtasia vfw working TechSmith Camtasia Screen Codec [tsccvid.dll]
ffcamstudio ffmpeg working CamStudio Screen Codec [camstudio]
fraps vfw working FRAPS: Realtime Video Capture [frapsvid.dll]
fffraps ffmpeg working FFmpeg Fraps [fraps]
fftiertexseq ffmpeg working FFmpeg Tiertex SEQ [tiertexseqvideo]
ffvmd ffmpeg working FFmpeg Sierra VMD video [vmdvideo]
ffdxa ffmpeg working FFmpeg Feeble Files DXA video [dxa]
ffdsicinvideo ffmpeg working FFmpeg Delphine CIN video [dsicinvideo]
ffthp ffmpeg working FFmpeg THP video [thp]
ffbfi ffmpeg working FFmpeg BFI Video [bfi]
ffbethsoftvid ffmpeg problems FFmpeg Bethesda Software VID [bethsoftvid]
ffrl2 ffmpeg working FFmpeg RL2 decoder [rl2]
fftxd ffmpeg working FFmpeg Renderware TeXture Dictionary decoder [txd]
xan vfw working XAN Video [xanlib.dll]
ffwc3 ffmpeg problems FFmpeg XAN wc3 [xan_wc3]
ffidcin ffmpeg problems FFmpeg Id CIN video [idcinvideo]
ffinterplay ffmpeg problems FFmpeg Interplay Video [interplayvideo]
ffvqa ffmpeg problems FFmpeg VQA Video [vqavideo]
ffc93 ffmpeg problems FFmpeg C93 Video [c93]
rawrgb32 raw working RAW RGB32
rawrgb24 raw working RAW RGB24
rawrgb16 raw working RAW RGB16
rawbgr32flip raw working RAW BGR32
rawbgr32 raw working RAW BGR32
rawbgr24flip raw working RAW BGR24
rawbgr24 raw working RAW BGR24
rawbgr16flip raw working RAW BGR15
rawbgr16 raw working RAW BGR15
rawbgr15flip raw working RAW BGR15
rawbgr15 raw working RAW BGR15
rawbgr8flip raw working RAW BGR8
rawbgr8 raw working RAW BGR8
rawbgr1 raw working RAW BGR1
rawyuy2 raw working RAW YUY2
rawyuv2 raw working RAW YUV2
rawuyvy raw working RAW UYVY
raw444P raw working RAW 444P
raw422P raw working RAW 422P
rawyv12 raw working RAW YV12
rawnv21 hmblck working RAW NV21
rawnv12 hmblck working RAW NV12
rawhm12 hmblck working RAW HM12
rawi420 raw working RAW I420
rawyvu9 raw working RAW YVU9
rawy800 raw working RAW Y8/Y800
null null crashing NULL codec (no decoding!)
ID_EXIT=NONE
I manually compiled using the svn source that I currently use on my Gentoo system and get the same odd results, whereas on Gentoo it compiles as you expect. This would seem to indicate that there is something about the Arch environment which is causing the problem rather than purely the source code.
I tried installing mplayer-vdpau-nogui but have the same problem there. -
Trouble getting SPDIF with Xi-Fi Xtreme Audio
-Trouble getting SPDIF with Xi-Fi Xtreme Audio? Hey guys,
I'm going crazy here, bought today a <span class="smallColor8">Sound Blaster X-Fi Xtreme Audio PCI-Express, the idea was to go toslink from card digital out to my receiver and to bitstream dolby digital and DTS... as I said that was the idea...
<span class="smallColor8">First problem, the CD was broken, no biggie went to the website and got myself the drivers - XFXA_PCDRV_LB__04_0000.exe? I installed that, rebooted and was welcomed by the updater application, I went to check what was there and most of it seems unecessary, I found a bit strange that it was telling me I needed the file I just installed, but I selected everything that was critical and launched the +250mb update (yuck) and I was very happy to see it was downloading at 30kbps (...)
<span class="smallColor8">After installing all that and rebooting I went in the control pannel to look for the SPDIF option but couldn't find anything relevant so went to read the manual and the first thing it says is click the decoder tab... and well I don't have a decoder tab, it's simply not there...
<span class="smallColor8">I thought I made a mistake, so I uninstalled everything, by the way this thing is a freaking nightmare to uninstall properly and this time went step by step making sure I wasn't missng a point and guess what I spent another 2 hour downloading at year 992 speeds, but got to the very same result, the decoder tab is not here.
<span class="smallColor8">So far it has been very frustrating but I'm some of you guys will make it all ok with a simple fix :P
<span class="smallColor8">I run windows XP SP3, already gave you sound card I use and driver I downloaded, If you need anything else just ask, I'll be around
<span class="smallColor8">ThxCr4P wrote:
First you talk about DAC, this is precisely what I'm trying to avoid, this is a 50$ card, I have a 7'000$ receiver I obviously want the digital to analog conversion to be done by the receiver, same goes for the decoding, actually I never expected a card this cheap to decode anything, I just want it to send the digital sound bit per bit (or bitstream) to receiver, it will do the DAC and Dolby/DTS decoding and of course it will do it much better
A card with a 48kHz-only DAC, that also puts out SPDIF, will put out 48kHz SPDIF in sync with the input, which means unless audio operations are attempted on a 48kHz encoding before it is sent to the card, which will destroy the encoding, it will be passed through without alteration.
The specs on the card's DACs don't look that bad. I for one wouldn't assume that those functions on your receiver are going to be that much better, and Dolby/DTS decoding is either done right or doesn't work at all. If I were you, I'd do a comparison test before making that particular assumption.
So what you're saying is simply using the card even though I don't see anything related to SPDIF should be enough and applications will take care of the bitstream, I use AC3filter with reclock and indeed I can select the audio device, but it ain't working at all.
There may be a problem with the AC3filter/ReClock combination. To check this, you could try playing a DVD with an "ordinary" player that has an SPDIF output selection.
When you say it ain't working at all, what exactly is happening?
BTW, if you are using AC3filter to make AC3 on the fly, you are probably doing extra encoding/decoding steps using a lossy encoding just to use your receiver's decoder, to which I personally would prefer using the card's analog outs connected to a receiver's multichannel inputs, unless comparison testing unexpectedly demonstated the extra encoding sounded better to me.
You keep saying this *basic card*, I was under the impression that creative was only doing basic card, if there's another model that will work out of the box to bitstream digital sound, please give me the reference number, I'll be happy to throw this card out my window and get one that works
An audio cable can do DD/DTS passthrough. Like a cable, your card is simple enough that its hardware will do passthough if fed a valid 48kHz encoding. CL's smarter cards have onboard mixing and use hardware sample-rate-conversion techniques any of which can destroy an encoding. These cards have to be put in a special mode which bypasses all that to accomplish passthrough successfully because by default they will destroy encodings.
-Dave
[email protected] -
I am having trouble send messages with attachments in Mail. Even small attachments (130K) Mail tries to send, then gives up and the message sits in my out box. How can I fix this?
1. You need an external DVD drive.
2. There are no Mac OS X applications or other software in the iTunes App Store.
(116312) -
McAfee SiteAdvisor is no longer working with my Safari 8.0. I never had trouble using it with Safari before this latest version. Has anyone else had this problem? I contacted McAfee support and they said nobody else is reporting this issue.
Wow, life is certainly tough for you.
S***t happens. That's why there's a warranty. -
I am have trouble sending email with an attachment?
I am having trouble sending emails with an attachment. Does anyone have a solution to this problem?
Impossible to answer with information provided
Allan -
Trouble logging in with my adobe ID
Hello, I'm useing PE 8 and am having trouble logging on with my adobe ID. I'm getting error 400 and check network connections. I know I have a internet connection. Thanks
No, adobe never supports any version of PSE after a new one comes out, and it doesn't support the current version much.
The only updates for PSE 8 are manually installed, so go to help>updates and when the updater tries to run, set it not to check again. I'm assuming you're using the windows version, so the ACR updates (all the updates there are) are here:
http://www.adobe.com/support/downloads/product.jsp?product=40&platform=Windows
Maybe you are looking for
-
Installing ALBPM Studio under Suse Linux
I have downloaded the Linux installer for ALBM studio 5.7. When I run the installer, I get numerous file not found errors for shared objects. I am running Suse 10.1. Looking on the release notes under installer known issues, I read: "When pointing to
-
IPhone 4 bumper/Apple dock not compatible
Sorry to have to tell users this, but the $29 Apple bumpers that supposedly improve iPhone 4 reception will render the phone incompatible with Apple's $29 dock. It's easy enough to take the bumper off every night and put it on again the next morning,
-
The tree menu on the left side of the screen at http://www.oracle.com/technology/software/index.html - Expand Downloads, - "Enterprise Manager" points to http://technologysoftware/products/oem/index.html and doesn't work. - "Developer Suite" points t
-
Upgrade 10.2.0.3.0 to 11.2.0.1.0
Hi All we have source db on Solaris which is on 10.2.0.3.0 I need to upgrade it to 11.2.0.1.0 on AIX I ran the following steps on source rman target / nocatalog run{ sql 'alter system switch logfile '; allocate channel ch1 type disk format '/export/d
-
How to drill down the values in ADF
Hi., I am using jdeveloper 11.1.1.5 I had created GLYearlyBalEo and GLPeriodicBalEO with corresponding VO These are the attributes in GlYearlyBalEo GAYB_BU, GAYB_YEAR, GAYB_ACCT, GAYB_OPBAL, GAYB_CRE_BY, GAYB_CRE_DATE, GAYB_UPD_BY, GAYB_UPD_DATE, GAY