Trouble with windows starter 7!!!

hellooo!! I got windows starter 7 on my samsung and I cannot run itunes on it . what should I do?

Upgrade to a better version of Windows 7.
Alternatively, if there is a specific problem, provide as much detail about the problem (exact error message) so the we can offer assistance.

Similar Messages

Does Adobe Reader XI work with Windows Starter 7?

I've been having trouble downloading Adobe Reader XI. It kept hanging at 96% during the installation. I tried to restart and download again and checked for viruses, but the installation never worked. I also tried the adobe cleaner to clean the product, restart and try the installation again. That didn't work. I also tried the direct download link and that didn't work either. In fact the direct download ended by saying there was a 150210 error ( no idea what that means :/ ).
So now I'm looking at the specs and wondering if the problem this whole time is that it's not compatible with WIndows Starter 7. Some tech specs don't specifically list Starter 7 (it's just assumed with Windows 7). Should this be working on my system or not? And if it is supposed to be working, how can I get the installation to work?
Thanks in advance.

I think the Reader installer should work on any Windows 7 edition. I don't know what the 150210 error means.
Try if you can succeed with the MSI installer: http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi (English version 11.0.0).

Im not very tech savvy. I use firefox on my desktop, and want to run on my new Asus netbook with Windows Starter. Will FF run faster then IE? What version of FF should I install?

Im not very tech savvy. I use firefox on my desktop, and want to run on my new Asus netbook with Windows Starter. Will FF run faster then IE? What version of FF should I install? in English
== This happened ==
Not sure how often
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MAAU; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; MAAU)

Im not very tech savvy. I use firefox on my desktop, and want to run on my new Asus netbook with Windows Starter. Will FF run faster then IE? What version of FF should I install? in English
== This happened ==
Not sure how often
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; MAAU; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; MAAU)

How can I make Thunderbird start auto with windows start-up

how can I make Thunderbird start auto with windows start-up

You can by placing a short cut in the windows startup folder, just like any other windows program.
However if you do you are likely to encounter problems as downloading mail while the anti virus is still loading and the network is busy announcing your machines arrival to the network ( which might be a network of one) and any of a dozen other program are loading is fraught with risk of timeouts and server disconnections as well as error messages that make little sense because they are about something that is still loading.
So the bottom line is sure you can, but if there are issues take it back out of there as a first step.

Trouble with Windows Service Pack 1 ?

I am using
Adobe CreatePDF, and because I am using it with a musical notation software program
, Finale, I have to use the Adobe Desktop Printer, to convert the file
s. This has worked very well for a couple of months but, the other day I attempted to us
e it and it doesn't work. I contacted Adobe, through their online chat room and a
fter trouble shooting my computer, the tech said that the Adobe Desktop Printer does not work
now with Windows 7, Service Pack 1. They are working on the problem. Has this been addressed on the forum yet? I'm sorry, but I couldn't find it if it has. Anyone else having this problem. It's really put me in a bind. How are we to know when the issue has been addressed?
Thanks.

I'm sorry, in the Subject Window, I neglected the "7". It's Windows 7, Service Pack 1.
Thanks.

Trouble with Windows 8

I tried to post this before but there was an error. I hope I am not repeating myself. I recently purchased a new desktop with windows 8. When I edit a photo every few click of my mouse or touches of my pen tab, cause the image itself to black out as well as my background to change from gray to black to clear (checker board). Have not had the same problem on my lap top which has the exact same version installed on it. But the lap top is running windows 7. My desktop has an AMD Six-Core FX-6200 Processor, 10GB DDR3 Ram and an AMD Radeon 7570 graphics card. If anyone has had the same problem or has an easy-to-understand answer; I'm not very computer savy. I could really use your help. Thank you.

Refer to this:
I can’t see my images and only get a black screen (or strange pattern).
If you have further questions, let us know.
Mylenium

Having trouble with freezing starting and stoping while syncing to i-pod

Having trouble with itunes freezing while syncing to i-pod

I have a Macbook with Tiger, and OS x 10.4. I had to install a new hard drive.
Run Disk Utility /Applications/Utilities
First, go to your Apple menu then click Software Update...
If no updates are available, check the startup disk using Disk Utility.
Using Disk Utility to verify or repair disks

Itunes trouble with windows 8

Since I got my new computer (HP Envy) I installed Itunes and everytime that I try to open the file it says it has encountered a problem and needs to close. I am running windows 8. I never had this problem with windows 7.

This came from another thread, but worked for me. Problem is with newest iTunes 4.62 and Windows 8.1. Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update). Reboot, and reinstall iTunes. It will reinstall all the other ones and you should be able to connect your nano. Good luck.

Radeon troubles with window dragging

Hey everyone,
I'm running kdemod with a radeon mobility hd3650 w/radeonhd driver. I'm definitely a semi-newb and really really confused about xorg/hal but here's a pic of what's happening: (sorry about imageshack :-P )
http://img231.imageshack.us/my.php?image=snapshot1t.png
Here is the xorg.log (I figured out how to get the output)
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux zeeARCH 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri May 8 12:52:01 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(==) No device specified for screen "Screen0".
Using the first device section listed.
(**) | |-->Device "name"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AIGLX" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling PS/2 Mouse
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Mobility Radeon HD 3650 rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "radeonhd"
(II) Loading /usr/lib/xorg/modules/drivers//radeonhd_drv.so
(II) Module radeonhd: vendor="AMD GPG"
compiled for 1.6.0, module version = 1.2.5
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) RADEONHD: X driver for the following AMD GPG (ATI) graphics devices:
RV505 : Radeon X1550, X1550 64bit.
RV515 : Radeon X1300, X1550, X1600; FireGL V3300, V3350.
RV516 : Radeon X1300, X1550, X1550 64-bit, X1600; FireMV 2250.
R520 : Radeon X1800; FireGL V5300, V7200, V7300, V7350.
RV530 : Radeon X1300 XT, X1600, X1600 Pro, X1650; FireGL V3400, V5200.
RV535 : Radeon X1300, X1650.
RV550 : Radeon X2300 HD.
RV560 : Radeon X1650.
RV570 : Radeon X1950, X1950 GT; FireGL V7400.
R580 : Radeon X1900, X1950; AMD Stream Processor.
R600 : Radeon HD 2900 GT/Pro/XT; FireGL V7600/V8600/V8650.
RV610 : Radeon HD 2350, HD 2400 Pro/XT, HD 2400 Pro AGP; FireGL V4000.
RV620 : Radeon HD 3450, HD 3470.
RV630 : Radeon HD 2600 LE/Pro/XT, HD 2600 Pro/XT AGP; Gemini RV630;
FireGL V3600/V5600.
RV635 : Radeon HD 3650, HD 3670.
RV670 : Radeon HD 3690, 3850, HD 3870, FireGL V7700, FireStream 9170.
R680 : Radeon HD 3870 X2.
M52 : Mobility Radeon X1300.
M54 : Mobility Radeon X1400; M54-GL.
M56 : Mobility Radeon X1600; Mobility FireGL V5200.
M58 : Mobility Radeon X1800, X1800 XT; Mobility FireGL V7100, V7200.
M62 : Mobility Radeon X1350.
M64 : Mobility Radeon X1450, X2300.
M66 : Mobility Radeon X1700, X1700 XT; FireGL V5250.
M68 : Mobility Radeon X1900.
M71 : Mobility Radeon HD 2300.
M72 : Mobility Radeon HD 2400; Radeon E2400.
M74 : Mobility Radeon HD 2400 XT.
M76 : Mobility Radeon HD 2600;
(Gemini ATI) Mobility Radeon HD 2600 XT.
M82 : Mobility Radeon HD 3400.
M86 : Mobility Radeon HD 3650, HD 3670, Mobility FireGL V5700.
M88 : Mobility Radeon HD 3850, HD 3850 X2, HD 3870, HD3870 X2.
RS600 : Radeon Xpress 1200, Xpress 1250.
RS690 : Radeon X1200, X1250, X1270.
RS740 : RS740, RS740M.
RS780 : Radeon HD 3100/3200/3300 Series.
RV770 : Radeon HD 4800 Series; Everest, K2, Denali ATI FirePro.
R700 : Radeon R700.
M98 : Radeon M98 Mobility.
RV730 : Radeon HD4670, HD4650.
M96 : Radeon M96 Mobility.
RV710 : Radeon HD4570, HD4350.
(II) RADEONHD: version 1.2.5, built from dist of git branch master, commit cb54f48b
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) RADEONHD(0): Depth 24, (--) framebuffer bpp 32
(**) RADEONHD(0): Option "DRI" "true"
(**) RADEONHD(0): Selected ShadowFB.
(II) RADEONHD(0): Unknown card detected: 0x9591:0x17AA:0x2127.
If - and only if - your card does not work or does not work optimally
please contact [email protected] to help rectify this.
Use the subject: 0x9591:0x17AA:0x2127: <name of board>
and *please* describe the problems you are seeing
in your message.
(--) RADEONHD(0): Detected an M86 on an unidentified card
(II) RADEONHD(0): Mapped IO @ 0xcfff0000 to 0xb7935000 (size 0x00010000)
(II) RADEONHD(0): PCIE Card Detected
(II) RADEONHD(0): Getting BIOS copy from legacy VBIOS location
(II) RADEONHD(0): ATOM BIOS Rom:
SubsystemVendorID: 0x17aa SubsystemID: 0x2102
IOBaseAddress: 0x2000
Filename: BR030541.101
BIOS Bootup Message:
M86M DDR3 600E/700M
(II) RADEONHD(0): Analog TV Default Mode: 1
(II) RADEONHD(0): Found default TV Mode NTSC
(II) RADEONHD(0): The detected amount of videoram exceeds the PCI BAR aperture.
(II) RADEONHD(0): Using only 262144kB of the total 524288kB.
(--) RADEONHD(0): VideoRAM: 262144 kByte
(II) RADEONHD(0): Framebuffer space used by Firmware (kb): 20
(II) RADEONHD(0): Start of VRAM area used by Firmware: 0x1fffb000
(II) RADEONHD(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEONHD(0): AtomBIOS VRAM scratch base: 0x1fffb000
(WW) RADEONHD(0): rhdAtomAllocateFbScratch: FW FB scratch area 536850432 (size: 20480) extends beyond available framebuffer size 268435456
(II) RADEONHD(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEONHD(0): Default Engine Clock: 600000
(II) RADEONHD(0): Default Memory Clock: 700000
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(WW) RADEONHD(0): Direct rendering for R600 and up forced on - This is NOT officially supported yet and may cause instability or lockups
(II) RADEONHD(0): Found libdri 5.4.0.
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(EE) RADEONHD(0): RHDDRIVersionCheck: drmOpen("radeon", "pci:0000:01:00.0") failed.
(WW) RADEONHD(0): RHDDRIPreInit: Version check failed. Disabling DRI.
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f90
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 0" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f94
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 1" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f98
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 2" initialized.
(II) RADEONHD(0): GPIO_I2C_Clk_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Clk_Mask_Shift: 0x0
(II) RADEONHD(0): GPIO_I2C_Data_Mask: 0x1f88
(II) RADEONHD(0): GPIO_I2C_Data_Mask_Shift: 0x8
(II) RADEONHD(0): I2C bus "RHD I2C line 3" initialized.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) RADEONHD(0): Detected VGA mode.
(II) RADEONHD(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEONHD(0): Maximum Pixel ClockPLL Frequency Output: 1200000
(II) RADEONHD(0): Maximum Pixel Clock: 400000
(II) RADEONHD(0): Reference Clock: 27000
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00000000 (size = 0x00004000)
(II) RADEONHD(0): FB: Allocated Cursor Image at offset 0x00004000 (size = 0x00004000)
(II) RADEONHD(0): Connector[0] {RHD_CONNECTOR_DVI, "DUAL_LINK_DVI_I DFP1", RHD_DDC_2, RHD_HPD_2, { RHD_OUTPUT_UNIPHYA, RHD_OUTPUT_NONE } }
(II) RADEONHD(0): Connector[1] {RHD_CONNECTOR_PANEL, "LVDS LCD1", RHD_DDC_0, RHD_HPD_NONE, { RHD_OUTPUT_KLDSKP_LVTMA, RHD_OUTPUT_NONE } }
(--) RADEONHD(0): Attaching Output UNIPHY_A to Connector DVI-D 1
(II) RADEONHD(0): LVDS FPDI: 0x1
(II) RADEONHD(0): LVDS Duallink: 0x1
(II) RADEONHD(0): LVDS Grey Level: 0x3
(II) RADEONHD(0): LVDS SEQ Dig onto DE: 30
(II) RADEONHD(0): LVDS SEQ DE to BL: 250
(II) RADEONHD(0): LVDS Off Delay: 500
(II) RADEONHD(0): LVDS 24Bit: 0x0
(II) RADEONHD(0): LVDS Spatial Dither : 0x0
(II) RADEONHD(0): LVDS Temporal Dither : 0x1
(--) RADEONHD(0): Attaching Output UNIPHY_KLDSKP_LVTMA to Connector PANEL
(--) RADEONHD(0): Attaching Output DAC A to Connector VGA 1
(II) RADEONHD(0): RandR: Adding RRoutput DVI-D_1 for Output UNIPHY_A
(II) RADEONHD(0): RandR: Adding RRoutput PANEL for Output UNIPHY_KLDSKP_LVTMA
(II) RADEONHD(0): RandR: Adding RRoutput VGA_1 for Output DAC A
(II) RADEONHD(0): Output DVI-D_1 using monitor section Monitor0
(II) RADEONHD(0): Output DVI-D_1 has no monitor section
(II) RADEONHD(0): Output PANEL has no monitor section
(II) RADEONHD(0): Output VGA_1 has no monitor section
(II) RADEONHD(0): Setting UNIPHY_KLDSKP_LVTMA to incoherent
(II) RADEONHD(0): I2C device "RHD I2C line 0:E-EDID segment register" registered at address 0x60.
(II) RADEONHD(0): I2C device "RHD I2C line 0:ddc2" registered at address 0xA0.
(II) RADEONHD(0): EDID data for LVDS Panel
(II) RADEONHD(0): Manufacturer: IBM Model: 2887 Serial#: 0
(II) RADEONHD(0): Year: 2005 Week: 0
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): No DPMS capabilities specified
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.596 redY: 0.347 greenX: 0.335 greenY: 0.543
(II) RADEONHD(0): blueX: 0.158 blueY: 0.143 whiteX: 0.313 whiteY: 0.329
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported additional Video Mode:
(II) RADEONHD(0): clock: 120.6 MHz Image Size: 331 x 207 mm
(II) RADEONHD(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
(II) RADEONHD(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
(II) RADEONHD(0): Supported additional Video Mode:
(II) RADEONHD(0): clock: 100.5 MHz Image Size: 331 x 207 mm
(II) RADEONHD(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
(II) RADEONHD(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
(WW) RADEONHD(0): Unknown vendor-specific block f
(II) RADEONHD(0): LP154W02-TL06
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff00244d872800000000
(II) RADEONHD(0): 000f0103802115780abca59858558b28
(II) RADEONHD(0): 24505400000001010101010101010101
(II) RADEONHD(0): 0101010101011c2f90d0601a0f402030
(II) RADEONHD(0): 13004bcf10000019452790d0601a0f40
(II) RADEONHD(0): 203013004bcf100000190000000f00b3
(II) RADEONHD(0): 0a32b30a28140100320c0000000000fe
(II) RADEONHD(0): 004c503135345730322d544c303600bf
(II) RADEONHD(0): Found native mode: Modeline "1680x1050" 120.60 1680 1712 1760 1888 1050 1051 1054 1065
(II) RADEONHD(0): Output DVI-D_1 disconnected
(II) RADEONHD(0): Output PANEL connected
(II) RADEONHD(0): Output VGA_1 disconnected
(II) RADEONHD(0): Using user preference for initial modes
(II) RADEONHD(0): Output PANEL using initial mode 1680x1050
(II) RADEONHD(0): RandR 1.2 support enabled
(==) RADEONHD(0): RGB weight 888
(==) RADEONHD(0): Default visual is TrueColor
(==) RADEONHD(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEONHD(0): Using 2560x2560 Framebuffer with 2560 pitch
(II) RADEONHD(0): FB: Allocated ScanoutBuffer at offset 0x00008000 (size = 0x01900000)
(==) RADEONHD(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules//libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) RADEONHD(0): Using ShadowFB
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) RADEONHD(0): Mapped IO @ 0xcfff0000 to 0xb7935000 (size 0x00010000)
(II) RADEONHD(0): Mapped FB @ 0xd0000000 to 0xa7911000 (size 0x10000000)
(WW) RADEONHD(0): RHDCSInit: No CS for R600 and up yet.
(==) RADEONHD(0): Backing store disabled
(==) RADEONHD(0): Silken mouse enabled
(II) RADEONHD(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Mapping DIG2 encoder to KLDSKP_LVTMA
(II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1680x1050" 120.60 1680 1712 1760 1888 1050 1051 1054 1065
None
(II) RADEONHD(0): Query for Conditional Golden Setting: failed
(II) RADEONHD(0): LVTMATransmitterSet: Incoherent Mode not supported, switching to Coherent.
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(**) Option "dpms" "true"
(**) RADEONHD(0): DPMS enabled
(WW) RADEONHD(0): Option "XAANoOffscreenPixmaps" is not used
(--) RandR disabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) RADEONHD(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event7"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event11"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) RADEONHD(0): EDID data for LVDS Panel
(II) RADEONHD(0): Manufacturer: IBM Model: 2887 Serial#: 0
(II) RADEONHD(0): Year: 2005 Week: 0
(II) RADEONHD(0): EDID Version: 1.3
(II) RADEONHD(0): Digital Display Input
(II) RADEONHD(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) RADEONHD(0): Gamma: 2.20
(II) RADEONHD(0): No DPMS capabilities specified
(II) RADEONHD(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) RADEONHD(0): First detailed timing is preferred mode
(II) RADEONHD(0): redX: 0.596 redY: 0.347 greenX: 0.335 greenY: 0.543
(II) RADEONHD(0): blueX: 0.158 blueY: 0.143 whiteX: 0.313 whiteY: 0.329
(II) RADEONHD(0): Manufacturer's mask: 0
(II) RADEONHD(0): Supported additional Video Mode:
(II) RADEONHD(0): clock: 120.6 MHz Image Size: 331 x 207 mm
(II) RADEONHD(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
(II) RADEONHD(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
(II) RADEONHD(0): Supported additional Video Mode:
(II) RADEONHD(0): clock: 100.5 MHz Image Size: 331 x 207 mm
(II) RADEONHD(0): h_active: 1680 h_sync: 1712 h_sync_end 1760 h_blank_end 1888 h_border: 0
(II) RADEONHD(0): v_active: 1050 v_sync: 1051 v_sync_end 1054 v_blanking: 1065 v_border: 0
(WW) RADEONHD(0): Unknown vendor-specific block f
(II) RADEONHD(0): LP154W02-TL06
(II) RADEONHD(0): EDID (in hex):
(II) RADEONHD(0): 00ffffffffffff00244d872800000000
(II) RADEONHD(0): 000f0103802115780abca59858558b28
(II) RADEONHD(0): 24505400000001010101010101010101
(II) RADEONHD(0): 0101010101011c2f90d0601a0f402030
(II) RADEONHD(0): 13004bcf10000019452790d0601a0f40
(II) RADEONHD(0): 203013004bcf100000190000000f00b3
(II) RADEONHD(0): 0a32b30a28140100320c0000000000fe
(II) RADEONHD(0): 004c503135345730322d544c303600bf
(II) RADEONHD(0): Found native mode: Modeline "1680x1050" 120.60 1680 1712 1760 1888 1050 1051 1054 1065
(II) RADEONHD(0): EDID vendor "IBM", prod id 10375
(II) RADEONHD(0): Printing DDC gathered Modelines:
(II) RADEONHD(0): Modeline "1680x1050"x0.0 120.60 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (63.9 kHz)
(II) RADEONHD(0): Modeline "1680x1050"x0.0 100.53 1680 1712 1760 1888 1050 1051 1054 1065 -hsync -vsync (53.2 kHz)
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): On Crtc 0 Setting 60.0 Hz Mode: Modeline "1680x1050" 120.60 1680 1712 1760 1888 1050 1051 1054 1065
None
(II) RADEONHD(0): Query for Conditional Golden Setting: failed
(II) RADEONHD(0): LVTMATransmitterSet: Incoherent Mode not supported, switching to Coherent.
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): Calling UNIPHYTransmitterControl
(II) RADEONHD(0): UNIPHYTransmitterControl Successful
(II) RADEONHD(0): RHDAudioSetSupported: config 0x60040 codec 0x1
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: stoped with 1 channels, 48000 Hz sampling rate, 8 bits per sample,
(II) RADEONHD(0): RHDHdmiUpdateAudioSettings: 0x00 IEC60958 status bits and 0x00 category code
(II) ThinkPad Extra Buttons: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
That pic is a little old, and my desktop is so much better than that now, but....
I cannot for the life of me remember what this unwanted window effect is called. it happens when I drag my windows and I obviously cannot enable any desktop effects.
Any words of wisdom?
A side note- I have no idea how to generate log files. I can access them and I know how to put them in a pastebin, but I have no idea how to actually get the full text from terminal (so if anyone can direct me to a decent .log-generation-how-to-wiki, that would be superb)
Last edited by zee (2009-05-08 19:57:39)

Your logs are generated automatically by your system as it runs - there is nothing further that you need to do. They are ordinary text files, so you can display them on a terminal using any of the usual tools - cat, less, grep, etc.

Trouble with MaxDB start up

Hello everyone. I have a problem with starting the system on MaxDB (Windows Server 2003).
First was an error :
No volume on compressed file 'c:\sapdb\S00\sapdata\DISKD0001', i change the properties (uncompress file), but now i get a new error message:
-24988 SQL error [db_online -f]; -9407, System error: unexpected error
This is KNLDIAG.ERR:
2010-05-11 15:59:43     0x14B0     19633 CONNECT Connect req. (T69, Node:'', PID:5288)
2010-05-11 15:59:43     0x14B0     19615 VOLUMEIO Attaching volume 'C:\sapdb\S00\sapdata\DISKD0001'
2010-05-11 15:59:43     0x151C     19613 DBSTATE I/O thread for 'C:\sapdb\S00\sapdata\DISKD0001' started
2010-05-11 15:59:43     0x14B0     19617 VOLUMEIO Single I/O attach, 'C:\sapdb\S00\sapdata\DISKD0001', UKT:7
2010-05-11 15:59:43     0x14B0     19615 VOLUMEIO Attaching volume 'C:\sapdb\S00\saplog\DISKL001'
2010-05-11 15:59:43      0x540     19613 DBSTATE I/O thread for 'C:\sapdb\S00\saplog\DISKL001' started
2010-05-11 15:59:44     0x14B0     19617 VOLUMEIO Single I/O attach, 'C:\sapdb\S00\saplog\DISKL001', UKT:7
2010-05-11 15:59:44     0x14B0     20016 Pager    Start Read Converter
2010-05-11 15:59:44     0x14B0     20017 Pager    Stop Read Converter, Pages: 5 IO: 5
2010-05-11 15:59:44     0x14B0     53000 DATACACH Begin data cache restart
2010-05-11 15:59:44     0x14B0     54003 dynpool DATACACHE STRIPES      :     64
2010-05-11 15:59:44     0x14B0     54003 dynpool DATACACHE HASH LIST    : 86024
2010-05-11 15:59:44     0x14B0     54003 dynpool DATACACHE head items   : 10753
2010-05-11 15:59:44     0x14B0     54003 dynpool DATACACHE head item siz:      8
2010-05-11 15:59:44     0x14B0     54003 dynpool DATACACHE TASK QUEUE   :   3672
2010-05-11 15:59:44     0x14B0     54003 dynpool DATACACHE taskq items :    153
2010-05-11 15:59:44     0x14B0     54003 dynpool DATACACHE taskq size   :     24
2010-05-11 15:59:44     0x14B0     54003 dynpool DATACACHE CONTROLBLOCKS: 343936
2010-05-11 15:59:44     0x14B0     54003 dynpool DATACACHE num cblocks :   2687
2010-05-11 15:59:44     0x14B0     54003 dynpool DATACACHE cblock size :    128
2010-05-11 15:59:44     0x14B0     54003 dynpool DYNP_B20_DATACACHE     : 27752448
2010-05-11 15:59:44     0x14B0     54003 dynDATA DYND_B20_DATACACHE     : 171968
2010-05-11 15:59:44     0x14B0     53000 DATACACH Finish data cache restart
2010-05-11 15:59:44     0x14B0     53000 B*TREE   LOB file directory restart successful
2010-05-11 15:59:44     0x14B0         7 FileDir File directory restarting
2010-05-11 15:59:44     0x14B0         8 FileDir File directory restart completed
2010-05-11 15:59:44     0x14B0     20061 Log      History: 50 (50) files existing
2010-05-11 15:59:44     0x14B0     20064 Log      History: all history files registered, GC is ready
2010-05-11 15:59:44     0x14B0 ERR 51080 SYSERROR -9407 unexpected error
2010-05-11 15:59:44     0x14B0 ERR     3 Admin    Database state: OFFLINE
2010-05-11 15:59:44     0x14B0 ERR 20025 Admin     +   ACTIVATE is missing
2010-05-11 15:59:44     0x14B0     19651 CONNECT Connection released, T69
2010-05-11 15:59:44     0x14B0     19621 DBSTATE Shutdown kill requested
2010-05-11 15:59:44      0x840 ERR     7 Messages Begin of dump of registered messages
2010-05-11 15:59:44      0x840 ERR     8 Messages End of the message list registry dump
2010-05-11 15:59:44      0x840     19684 TASKING Tracewriter termination timeout: 1200 sec
2010-05-11 15:59:44     0x1788     20000 Trace    Start flush kernel trace
2010-05-11 15:59:44     0x1788     19617 VOLUMEIO Single I/O attach, 'knltrace', UKT:1
2010-05-11 15:59:44     0x1788     20001 Trace    Stop flush kernel trace
2010-05-11 15:59:44     0x1788     20002 Trace    Start flush kernel dump
2010-05-11 15:59:44     0x1788     20003 Trace    Stop flush kernel dump
2010-05-11 15:59:44     0x1788     19619 TASKING Releasing tracewriter
2010-05-11 15:59:44      0x840     19890 DIAGHIST Backup of diagnostic files will be forced at next restart
2010-05-11 15:59:44      0x840     19600 VERSION 'Kernel    7.6.06   Build 010-123-229-880'
2010-05-11 15:59:44      0x840     19654 DBSTATE SERVERDB 'S00' has stopped
I don't know what to do, help me please,
Thanks in advanced!
regards, Valentina

Hello,
You got error:
u201C2010-05-11 15:59:44 0x14B0 ERR 20025 Admin + ACTIVATE is missingu201D
The reason could be that before you started the database online,
you tried to restore a backup with initialization and it failed, or tried
to initialize the database <db_activate > and failed.
-> Please check the dbm.prt & dbm.utl files when the database was activated last time.
Was the last step of the u201CCREATE INSTANCE WITH RESTOREu201D or u201CCREATE INSTANCE SYSDBA ..u201D successful? < If the step was successful, you will see in dbm.utl
u201CRETURNCODE     0;CREATE INSTANCE SYSDBAu201D after u201CCREATE INSTANCE SYSDBA..u201D, for example. >
-> Are you SAP customer?
Thank you & best regards, Natalia Khlopina

Troubles with Windows after installing Acrobat X

I built a Windows 7 machine from scratch twice and ended up with the same issue. As soon as I install Adobe Acrobat X Standard, Windows Explorer freezes whenever I right-click on something in Windows Explorer (icon on desktop or inside folder). I disabled the Acrobat Shell Extension but still have other problems. I was unable to print anything to any of my printers. If I right-clicked on a printer, it would freeze up again. If I restarted the print spooler service, it resumed normal operation. The first time I upgraded to the latest update (10.1.13) and had the same problem. After the second reload, I left it at the default version 10.0.0. I have the same problem either way. I was able to remove all of the printers from Windows through registry and Windows System32 and recreated my printers. I also recreated the Adobe PDF printer per Adobe's instructions on their website. My initial tests proved successful. But when my user went to try it, the "Creating Adobe PDF" window came up and he got about 3 bars and it froze. I went in and tried printing some other PDFs, and it did create the files, but it would not let me delete the files. It indicated that Acrobat.exe still had the file locked. When I tried uninstalling Acrobat, it would stall part way through until I restarted the Print Spooler service. I have also tried disabling the AntiVirus (SEP).
I have spent way too many hours setting up this PC 3 different times and troubleshooting this. My gut says that there is a Windows update that may be interfering with this. But I don't know where to start. This worked fine on his previous machine (same version of all software.
I would appreciate any assistance. Surely someone else has run into this before. Thanks in advance.
Bill

Hi William ,
Please perform the following steps .
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check
Regards
Sukrit Dhingra

Trouble with Windows Mail

I am having trouble establishing linking my Verizon e-mail account to Windows Mail. I can set up the account, but get the error 0x800CCC90 incorrect password entered every time I try to sync. I am using the same name and password that I use to access the Verizon Yahoo account directly. Any ideas?
Solved!
Go to Solution.

Since you mention that it's a Verizon/Yahoo account, make sure that your servers are set to:
Incoming (pop3): incoming.yahoo.verizon.net
Outgoing (smtp): outgoing.yahoo.verizon.net
The normal Verizon pop servers won't work for accounts partnered with Yahoo. Hope this helps!
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Sound Blaster X-FI Xtreme Gamer Card Trouble With Windows Vi

Hi, yesterday I installed vista and had no sound, I then updated the drivers for my Sound Blaster X-FI XtremeGamer Card and then the card was detected. The card says the drivers are working and that everything is fine yet I hear no sound, I have messed around with the options unmuting things but nothing seems to work, any help would be great. Thanks, Auro

Hi, im not tryin to insult ur intelligence but have u checked to make sure the sound is not muted in windows? for some reason my pc mutes the sound randomly when i turn it on (yes im running Vista 64...). This confused the beejesus out of me until i realised what was happening. Now im lucky if my pc actually starts up because of crummy xfi drivers and the BSOD but thats another rant entirely.....
Jason

Trouble with Windows 7

We use business management software from EFI, which includes a "UserReports.exe" they built to launch Crystal reports with command line scripts from within their software. I, as the IT guy working with the end users, create the reports and everything has worked fine until we got a few Windows 7 machines. Now the Windows 7 users aren't seeing a "Printer..." button from within the printer setup window of the UserReports.exe viewer. They tried sending us a new UserReports.exe file, but it didn't work at all. I know the button issue is nothing you can help me with, but if you could confirm that, I'd really appreciate it. The main reason I am writing is because some people have suggested it might not be working because my Crystal developer software needs updated. I have Crystal XI and Crystal 2008. If the reports worked fine on XP machines, Windows 7 should be no different, right? Is anything I can do, any client-side runtime updates for the Windows 7 machines, anything at all I can do to rule out trouble on my end?

Hi Ben,
Unfortunately you'll have to ask the makers of that software to debug this issue. We don't have it so it would only be guesses as to the cause.
This MS Kbase article may help, it's for WEB app but may be for Windows 7 also, I have the same problem in my test app, only System Printers return, no User Printers work. But my Windows 7 at home doesn't have this problem...:
http://support.microsoft.com/default.aspx?scid=kb;en-us;184291
Also, CR XI R2 SP 6 and CR 2008 SP 2 added Windows 7 support, if they are using runtime older than that they have to update their product.
Don
Edited by: Don Williams on Oct 20, 2011 1:11 PM

Trouble with Windows 8.1 and hp officejet 8620

Hi, we've installed a brand new hp Officejet Pro 8620.
We've installed the full software package on a Windows 8.1 machine.
It all seemed to be fine, but suddenly our machine is not capable of print on certain circumstances:
- It can't print from:
a) Notepad: "incorrect parameter" error message
b) Office: Word, Excel, etc... no error, but it simply does not print
c) Adobe Acrobat: no error, but it simply does not print
d) Test print from printer configuration: error
but it CAN print from:
a) hp printer assistant, hp print scan and doctor (hp software)
b) hp AiO printer remote (it's a Metro app), only pdfs
c) Internet Explorer, Google Chrome, etc...
We've tried to reinstall the whole package with no success. It seems that's something's wrong with the driver and desktop applications, any ideas? Anyone with similar problem?
Best,
K
This question was solved.
View Solution.

Finally we've used the proposed solution on:
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Is-Windows-8-1-and-HP-8620-compatible/t...
The trick is drivers for 8600 must be downloaded and installed before the change. 8600 drivers included with 8.1 don't work.
We'll wait for new 8620 drivers that could fix this problem. Meanwhile, we can print with 8600 drivers, and scan with 8620 drivers.
Best,
JM

Trouble with windows starter 7!!!

Similar Messages

Maybe you are looking for