Trouble with wireless bridge......

I am having extreme difficulty setting up Cisco Aironet 1310 series devices. here is an overview:
We have our main network with an ip scheme of 10.1.1.0/24 on one side and an office across the street that is on 10.1.2.0/24.
I want to connect these 2 networks via wireless bridge. We do have a PTP T1 between the 2 sites that is used to carry VoIP traffic and data, but I want the data moved to the wirless bridges.
I put the bridges on their own network of 192.168.1.0/28 and I am using 2 switches with their own VLANS on the same network as the bridges.
No matter what I try, I can't get traffic to flow properly.
does anyone have any suggestions or can they point me in the right direction. It is driving me crazy!
thanks in advance for any help you can provide.

Hi Andrew, Thanks for the response.
AP's are running in "root" and "non-root" mode and they are able to talk to each other ok. Just can't get the traffic to flow from point A to B (the main network, through the wireless bridges, over to the remote network and back again), then back from B to A. The traffic either loops or bounces back and forth between the firewall and the switches. I suspect I need t tweak the gateways on each of AP's as well.
Right now, the gateways are set to point to the VLAN set on the switch of the opposite side. This way, traffic hits the AP and is forwarded through to the opposite VLAN.
I am using seperate VLAN's to seperate the traffic but have not tried to associate with a specific SSID as of yet.

Similar Messages

Need Help With Wireless Bridging

Hello all, I have recently perchased high speed WiFi for my house so I could do some gaming on my Xbox. Problem is my roommate, who is a tech support professional, set the modem up in his bedroom, my Xbox is old and requires a wireless adapter to pick up signals but since the modem is so far away from it it barely recieves the signal. So currently I'm paying for nothing so I confronted him about this issue and he attempted to fix it by wirelessly bridging a router to the modem but after a month he hasn't succeeded and has given up so now it's up to me and I have no clue where to even begin. The modem we have is a Cisco DPC3825 and the router is a NetGear Wireless-N Router WVR2000 V2. Any help would be greatly appreciated.

Denver: I did not actually understand what kind of bridging you want to do?
The modem already has a wireless transmitter. I think you mean the router is picking up the wireless signal and provide the xbox with connectivity via wired cable. is that right?
If correct, It looks like the issue is with the distance/barriers between your modem and router. You need to try to eliminate some barriers in between to get better signl. Try also to put the devices as close as possible to each other.
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

Trouble with Adobe Bridge CS5.5 for Mac Lion Photo downloader

Hi, I am having trouble with CS5.5 Bridge's photdownloader when I am trying to choose a folder location.
Im using Lion / Mac
When I try to choose say an external drive or another folder location it will freeze up and stay on "Choose" the button flashes on and off but when i try to click it it will not respond or select the desired file location
The photodownloader does not respond to any other commands..i have to force quit it..yes i have re-booted..re-started and problem remains..
The only way i can download photos is by choosing the first file option of the pictures file on my harddrive which is not want I wish to do..i have noticed that this started happening after the Raw update..was wondering if this is affecting Photodownloader..
any suggestions would be greatly appreciated..thank you

Thank you, SG, for clarifying which OS's this will work with.
I agree with Jennie - the beauty of "get photos from camera" is that it takes 2 steps out of the workaround you mention above. Personally, I'm okay living with 6.4.1, as I have an older camera. I won't be happy if one of the push updates re-updates me to 6.5 though. I wouldn't want to redo the reinstallation of the new version. This method will not work for any of my clients or students though - they normally can't comfortably follow the technicality of downgrading, and some have newer cameras and would need the 6.5 version. (I don't believe in betas for my clients, and neither do they, for the most part)
I guess I should thank Adobe - some of my clients have needed tech support to perform the downgrade (SO many people aren't comfortable technically), and some of my clients needed to be retaught the workaround SG mentions. Adobe's flub has actually made me a little money - which I'd rather not have to make this way.
SG's workaround does work and makes sense - but for my clients with hundreds of images at a time, who have to rename items, add copyright info, & etc., this more than doubles their work-time for the start of their workflow. I hope Adobe gets that GM version out soon.
BTW - this issue supports an argument I've hadfor years regarding "PUSH" updates. I always tell my clients and students not to do them until they research the update. Because of what I do, I do have to install them personally, but I'm grateful I'm comfortable fixing things myself.

Problems with wireless bridge

I have an iMac, and I'm using its built in Airport function to share the internet connection with various devices.
I just purchased a WET610N for use with my DirectTv HD DVR which isn't wifi enabled. I took everything out of the box, put the CD into the computer and started the configuration process.
I hit a snag right off. I can't physically plug the WET610N into anything to configure it. The instructions say to plug the wireless bridge into one of the spare ethernet ports in your router. The iMac only has one ethernet port, the one that runs from my DSL modem into the iMac.
My DSL modem only has one ethernet port too.
The DVR can't see the bridge when it scans for it. The instructions say that it needs to be configured for my network before it can be seen by any devices. I'm at a loss as to how to get this up and working. But, I figure that someone out there has done this before.
Thanks in advance for any help you can provide

David Skoglund wrote:
I did. None of their instructions deal with using the built in Airport fuction. They all assume you've got an external router with multiple ethernet ports.
This is why I'm asking on the Apple boards.
I see, I'd recommend using a router instead. While an iMac can act as a router not many users try this route so finding someone that knows the ins and outs of how to set it up might be slim. You can also try posting on the Snow Leopard forums, perhaps someone there may know.
However if I were you I would simply get a router.

Troubles with wireless keyboard and iMac

My iMac won't recognize most of the keys on my wireless keyboard. Only several of the function keys seem to work. I've even tried replacing it with a new wireless keyboard, which worked to type in the pairing codes but also wouldn't enter any text into the password field. Since I'm stuck at the login screen and can't enter my password, I can't access any of the software troubleshooting programs that apple support recommends. I just ran an update several days ago. Could that have caused troubles?

1) You need to go into more detail as to the trouble with the wireless keyboard
2) Why can't you get a USB one? You can't order one online? Borrow one from someone?
Without some kind of text entry to enter the password this is going to be difficult.

Connecting two networks with wireless bridges

Hello all,
We are trying to create a true CAN. We have 2 sets of 2 buildings each. One set is on the 172.23.x.x network and the other set is on the 172.25.x.x network. Each set has routing in place to go out over their respective MPLS circuits (which will be removed once this project is done). Each set also has their own vtp domain each containing ~30 vlans.
Right now, there is a wireless bridge at each set of buildings and they can reach each other fine according to the vendor. I am trying to figure out an efficient way to tie these two networks together keeping their current vlan and local topology in place.
Site 1:
Vlan 1: 172.23.1.x
Wireless bridge: 172.25.1.x
Site 2:
Vlan 1: 172.25.1.x
Wireless bridge: 172.25.1.x
Any help is appreciated. The idea is that all traffic from site two will now traverse the wireless bridge and use all resources and routing available at site 1.

OK wel now the only solution left for you re-designing the IP addressing or if you want same ip address either increase the scope or range of ip address per vlan or use DHCP server to provid Half the address to both sides. but the interface connecting interface must be a Layer 3 or Layer 2 ports.The only concern should be DHCP server vlan over lapping can be manage by Configuing VTP (Client/Server) .
(Switch) ====wireless------------------wireless====(switch)
Trunk (Layer2 port) Trunk (Layer2 port)
and for vlan just if one dhcp server nothign to worry and incase of multiple server just load balance it will also provide the reduncency in you network.
other option is simple using L3 approach and change the ip address only for resourches you want other people to access.

Trouble with wireless switch (rfkill) and wireless connectivity.

Hello, this is my first message in this community so please bare with me if this message should be in the newbie part; but I think it's better fitted here. Other than that, I'm glad to be here .
After quite some time in Fedora I'm coming to Arch and I must say I'm delighted, so I wanted to use it in my laptop too which was running an old version of Fedora.
The laptop is an Airis N930 (about 5 years old) with a RaLink RT2500 wireless adapter which worked well in Fedora 11 but I'm having some trouble getting it to work in Arch. The problem is that the connectivity switch in this laptop is kind of a software one: in Windows it's compulsory to have a program which came in the drivers disk so that when that button is pressed (think of it as another key in the keyboard) the wireless connectivity is turned on and the indicator led lights up.
For a Linux based system there's no such program (I think) but the behaviour seems to be different in newer and older systems (I've tried Fedora and Ubuntu recent live environments and the behaviour is the same as in Arch). In Fedora 11 it just works everything's unblocked by default, in Arch the hardware block seems to be on and I don't know of any way to unblock it:
root@laptop ~ $ ifconfig wlan0 up
SIOCSIFFLAGS: Operation not possible due to RF-kill
root@laptop ~ $ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
root@laptop ~ $ rfkill event unblock phy0
1298671843.804446: idx 0 type 1 op 0 soft 0 hard 1
Pressing the wireless connectivity button doesn't produce any event... Does anyone know what can I try or how to remove the hard block? Could it be related to newer kernels?
Thank you very much for your time, any fixes, workarounds or ideas are welcomed.

Thank you for your tips lamegaptop. I already have linux-firmware installed and I'm using the supported kernel module for the card (it's a PCI one):
06:01.0 Network controller: RaLink RT2500 802.11g (rev 01)
Loaded modules for it:
rt2500pci 12420 0
rt2x00pci 3890 1 rt2500pci
rt2x00lib 24866 2 rt2500pci,rt2x00pci
mac80211 178404 2 rt2x00pci,rt2x00lib
cfg80211 120337 2 rt2x00lib,mac80211
eeprom_93cx6 1004 1 rt2500pci
Rfkill is installed too, the output I posted in the first post belongs to the commands I entered in the Arch system. In Fedora rfkill always reports both blocks to be off.
As the Fedora system is running a 2.6.30.10 kernel I tried to run some tests using the LTS kernel (it's a 2.6.32.X right now) in the Archboot live environment, the output of "rfkill list" changed as seen below:
$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
$ rfkill iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11bg ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:264 (264.0 b) TX bytes:264 (264.0 b)
$ ifconfig wlan0 up
$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:264 (264.0 b) TX bytes:264 (264.0 b)
$ rfkill list
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
$ ifconfig wlan0 up
SIOCSIFFLAGS: Operation not possible due to RF-kill
This behaviour was the same when running the default Arch kernel in Archboot. I'm thinking in extracting the kernel configuration from the Fedora kernel and use it to build a new one and see if it helps, although I'm not sure where the problem may be.

Z60t Trouble with Wireless LAN

A few weeks ago my Z60t ThinkPad developed trouble connecting to my LAN and I don't know why. The LAN connects my desktop and laptop via a Linksys router, which also provides the Internet access. The desktop, which has no wireless, connects by cable. The ThinkPad used to connect by wireless for many months, but it no longer does automatically. I can connect the ThinkPad via cable without any trouble. When I try ThinkVantage to find the LAN, it shows the proper name assigned to my LAN (as well as another access point that presumably belongs to a neighbor). When I click to connectto the LAN, the Access Connections window appears - but with the wrong name! Naturally it does not connect. I have no idea where that name, BApart, comes from. It does not show on the ThinkVantage panel of Wireless Networks and it is not the neighbor's LAN. I have never used it before. Occasionally Access Connections comes up with another name that I earlier used for my LAN before it switches to BApart and finally gives up.
The only way I can get the wireless connection working again is to use a Linksys program, which is very slow but usually makes the connection finally. Occasionally even it gets stuck. Once it makes the wireless connection, it works fine - until the next time I turn on the laptop or experiment with ThinkVantage to see if I can get it to connect again.
Where are those wrong names stored? Why do they pop up instead of the right name? How do I get rid of them permanently?

Bucky:
This happens to me fairly often after applying Microsoft Windows updates. To fix the WiFi interface, I have to boot into Safe Mode, then go into the Device Manager, delete the LAN (ethernet interface), then reboot.
The device manager won't let me delete the WiFi interface (says that interface is needed for booting), but will let me delete the LAN interface. Somehow, that makes the WiFi interface work again.
This recurring pain is why I have purchased no more Lenovo computers.
Chris Shaker
Message Edited by cjshaker on 03-02-2009 02:10 AM

Trouble with wireless n and smb shares

I have a bit of a per-plexer here.
I have a personal mac that up until a little while ago, ran 1.5.8 flawlessly for six months since i had it.
This included a lot of mounting my windows 7 file server and watching movies or listening to music over wireless G. Every night in fact I would fall asleep to a movie, then wake up and play some music from my music folder on the same server.
The battery would die nightly of course. Morning, charge it up with some music on.
I picked up a copy of snow leopard upgrade for 30 bucks when it was released or there about and installed it. Went fine and I continued happily using the machine for about 2 months.
Then I bought a belkin wireless N gigabit router, to replace my wrt54g. It worked alright and I continued my daily/nightly routine, watch a movie, sleep, listen to music.
However the first morning, and every morning subsequently there after I have run in to a pain-in-the-butt problem.
I awoke to find, like always, my server shares still mounted (or at least they appeared to be). But opening any of them would present a blank finder window, like no files were available.
Unmounting and re-mounting the shares would fail, with a message saying unable to connect to the PC.
So, what do you do next? I reboot. My programs close, the dock, finder, my background turns to the blue solid.
System stops re-booting... it sits here, with a plain cursor and I am unable to do anything but hard-power it off.
After a hard-reboot,everything functions normally until it hibernates or sleeps with the samba shares.
I took the router back and got a dlink n/gigabit router instead, cussing out belkin on my way to the store. No change!
So I reinstalled (I didn't even archive, i just blew it away) - installed 10.5.8 again, upgraded to SL, and connected to my wireless. I can still reproduce the issue.
So, i'm bummed, i've tried a lot of things I wont bother listing here but one more important detail i wanted to add is:
I work at a company that has blanket wireless b/g coverage using multiple access points and a controller to do load balancing and access point switching.
Recently, we got a few N access points from the provider and I set them up around the office in a new, isolated SSID on the subnet i do my work on. Using WPA2 Psk, like at home.
So, now to be fair I've got a slightly-newer mac at the office, same unibody but late 2009 instead of early 2009 (sd slot instead of express slot). I threw SL on it, and connected to the new SSID i setup and finally connected to our netapp and left for the night.
Come in in the morning and I can reproduce the issue on the work mac.
So, two different macs, 2 very different N wireless networks and 2 different file server platforms. But same prob, **** thing chokes overnight.
I have been able to reproduce this issue with a slough of late 2009 macs at the office now, as I handed out the SSID key to those with SL as my unwitting test subjects. Everyone's coming up with the same problem.
Has anyone out there run in to this? It's such a huge issue i'm surprised i can't find anymore information about it!
Thanks,
Josh

I took a look at the logs and copy and pasted a lot, these are a few before and many from AFTER the hibernation last night.
10-04-15 12:23:59 AM kernel hibernate image path: /var/vm/sleepimage
10-04-15 12:23:59 AM kernel sizeof(IOHibernateImageHeader) == 512
10-04-15 12:23:59 AM kernel Opened file /var/vm/sleepimage, size 2147483648, partition base 0xc805000, maxio 400000
10-04-15 12:23:59 AM kernel hibernate image major 14, minor 2, blocksize 512, pollers 5
10-04-15 12:23:59 AM kernel hibernateallocpages flags 00000000, gobbling 0 pages
10-04-15 12:23:59 AM kernel NVEthernet::setLinkStatus - Valid but not Active
10-04-15 12:23:59 AM kernel AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
10-04-15 12:23:59 AM kernel System SafeSleep
10-04-15 6:52:18 AM kernel hibernatepage_listsetall start
10-04-15 6:52:18 AM kernel hibernatepage_listsetall time: 101 ms
10-04-15 6:52:18 AM kernel pages 270008, wire 57222, act 56136, inact 190, spec 78, zf 0, throt 0, could discard act 30534 inact 16602 purgeable 6519 spec 102727
10-04-15 6:52:18 AM kernel hibernatepage_listsetall found pageCount 113626
10-04-15 6:52:18 AM kernel IOHibernatePollerOpen, mlget_interruptsenabled 0
10-04-15 6:52:18 AM kernel IOHibernatePollerOpen(0)
10-04-15 6:52:18 AM kernel writing 111988 pages
10-04-15 6:52:18 AM kernel image1Size 126571008
10-04-15 6:52:18 AM kernel PMStats: Hibernate write took 3775 ms
10-04-15 6:52:18 AM kernel all time: 3775 ms, comp time: 767 ms, deco time: 0 ms,
10-04-15 6:52:18 AM kernel image 226658304, uncompressed 458993664 (112059), compressed 223746576 (48%), sum1 44b2f2dc, sum2 b54e1f71
10-04-15 6:52:18 AM kernel hibernatewriteimage done(0)
10-04-15 6:52:18 AM kernel sleep
10-04-15 6:52:18 AM kernel Wake reason = PWRB
10-04-15 6:52:18 AM kernel System Wake
10-04-15 6:52:18 AM kernel Previous Sleep Cause: 5
10-04-15 6:52:18 AM kernel en1: 802.11d country code set to 'X0'.
10-04-15 6:52:18 AM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
10-04-15 6:52:18 AM configd[14] network configuration changed.
10-04-15 6:52:18 AM configd[14] setting hostname to "hostname.local"
10-04-15 6:52:19 AM kernel NVEthernet::setLinkStatus - Valid but not Active
10-04-15 6:52:19 AM kernel en1: 802.11d country code set to 'US'.
10-04-15 6:52:19 AM kernel en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
10-04-15 6:52:20 AM kernel Auth result for: 00:24:01:f3:01:5a MAC AUTH succeeded
10-04-15 6:52:20 AM kernel AirPort: Link Up on en1
10-04-15 6:52:20 AM kernel AirPort: RSN handshake complete on en1
10-04-15 6:52:22 AM configd[14] network configuration changed.
10-04-15 6:52:22 AM configd[14] setting hostname to "hostname.domain"
10-04-15 6:52:27 AM Firewall[407] krb5kdc is listening from :::88 proto=6
10-04-15 6:52:27 AM Firewall[407] krb5kdc is listening from 0.0.0.0:88 proto=6
10-04-15 6:52:40 AM ntpd[310] time reset +0.219956 s
10-04-15 6:53:36 AM [0x0-0x25025].org.mozilla.thunderbird[839] Warning: unrecognized command line flag -foreground
10-04-15 6:53:38 AM WindowServer[423] kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
10-04-15 6:53:38 AM com.apple.WindowServer[423] Thu Apr 15 06:53:38 pluto.sunlab WindowServer[423] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
10-04-15 6:55:34 AM kernel smbfssmblookup: smbfssmbqpathinfo error = 60
10-04-15 6:55:34 AM kernel smbfssmblookup: smbfssmbqpathinfo error = 60
10-04-15 6:55:34 AM kernel smbfssmblookup: smbfssmbqpathinfo error = 60
10-04-15 6:55:34 AM kernel smbfssmblookup: smbfssmbqpathinfo error = 60
10-04-15 6:55:34 AM kernel smbfssmblookup: smbfssmbqpathinfo error = 60
10-04-15 6:55:34 AM kernel smbfssmblookup: smbfssmbqpathinfo error = 60

Trouble with Adobe Bridge

Hi,
It appears that the instllation of Adobe Bridge did not function with my Cretive Cloud downloads and installs...
Bridge does not appear as an application or anywhere within my Mac's directory structure (OS X Lion).
Is there anyway to reinstall it?
Thanks!
Eric.

Hi Eric,
I've moved your question from the Photoshop Beginners forum to the Downloading, Installing, Setting Up forum. I hope you get the answer you need!

Need Help: Trouble with Wireless Router Connection on MBP

Hi all. I just bought a MacBook Pro (my first Mac ever) and love, love, love it. However, one glitch is driving me crazy. I do *NOT* have an airport but I connect to my cable modem through my netgear wireless router. When my MacBook Pro goes into sleep mode, I lose the connection to the wireless router. I have to go unplug the router to reboot it for the MBP to see it again. I think it has something to do with how it is assigning the IP address. Has anyone else seen this issue? Know how to solve it? Thanks so much.

See "Symptom: The network connection drops unexpectedly" on this page:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6

Trouble with Mini-Bridge

I am using Photoshop CS6 on Windows 8.1 system. Have already had to disable Graphics Processor to stop the flickering window, now Mini-Bridge says it can't find any files. No problem with Bridge, just Mini-Bridge. Any ideas? Thanks

Thanks Curt. Yes Bridge is open. It is okay, I found the problem. Some of my library names changed when I upgraded to 8.1. Found the problem and solution.

Trouble with wireless sync settings for Yahoo Calendar/Contacts

Hello,
Today I attempted to sync my Yahoo Calendar and contacts with my Tour. I was able to get it to synchronize when I connect it to the computer, but I intended to set up wireless sync.
If I go to the Calendar, and then select Options, I can see my email address under "Calendars." If I highlight and select my e-mail address, I can see the "Wireless Synchronization" option, but it says "No" next to it, and will not allow me to accept "Yes"--- it's just not an option.
How do I fix this?!
Thanks so much for any suggestions.

I also have the Tour and have the same problem....Did you ever figure it out?

IMac suddenly has trouble with wireless connection

This is how it happened:
1. Landlord buys electrically faulty mansion
2. Landlord realizes he cannot keep up with mortgage and property taxes
3. Landlord subleases rooms to renters, including me
4. House has a power outage, iMac shuts down.
5. iMac recognizes wireless network, but shows that it has zero connectivity (which is false, because my two other laptops connect just fine, because their powers obviously weren't cut off abruptly)
6. Verified and fixed the iMac with installation disc, but still the wireless connection comes and goes on its own whim.
7. Tried shutting off nearby computers to see if it would take away any sort of interference. Worked, but after hours of working, iMac yet again fails to connect.
8. Tried assigning it IP ranges and all that - no luck there.
So what now, guys? Am I going to have to send my beloved iMac away for repair? It's the current model, if that helps. Any help would be appreciated...!

Just called apple support. This is what they suggest:
System management control reset:
1. plug out everything that connects to the imac
2. press the power button for 7 seconds
3. don't start the imac yet!
4. as SOON as you start the imac, press command/option/P/R.
If this doesn't work, then you need to pretty much bring it to the store to have it looked at.
This actually worked for me.

Mac mini first start up trouble with wireless keyboard and magic mouse

Do you need to use a USB keyboard and mouse for your first mac mini start up? I've just fired it up for the first time and got a strange start up screen. The icon looks like a battery compartment with a green switch with an arrow pointing up. I've read all of my manuals and can not find anything to help me. Any ideas??

Yes you need to use a wired keyboard.

Trouble with wireless bridge......

Similar Messages

Maybe you are looking for