Trouble with Z10 backing up using link

I have never been able to back up my Z10 using Link. I've just updated the software to the latest version of link and it still gets to about 2% (which is more than it's ever been able to do before) and then fails.
Media synchronisation seems to work fine, it just won't backup.
I have president's choice recipe box app, but it wouldn't back up before this either.

Hey rcgnrcp,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
I would suggest trying a backup without including the application data. Follow these steps:
In BlackBerry Link click on the BlackBerry at the bottom and click on Settings at the top. Put a checkmark for select data to include in your backup files and add checkmarks to all except Application data. Then click on Back up now.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Similar Messages

Can I have multiple iPhones with unique back ups using one icloud account?

Hello forum users,
Can I have multiple iPhones with unique back ups using one icloud account?
I would like to back up and restore 4 different iPhones, 1 iPad, a MacBook and 1 MacBook Pro using the same single iCloud account.
If so, how is this done?
Many thanks

Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account.

I am having trouble with comcast e mail using safari

I am having trouble with xfinity e mail using browser, SAFARI

I too had this issue. I was recently an employee and user of Comcast and they do not support Safari. Some functions work, many don't. I used Firefox and had no issues. I also set up my mail using MAC MAIL and didn't have any issues with that.

Having trouble with Z10

I am having trouble with Z10. The phone automatically stops ringing. Even all the notifications are turned on and the volume is full there is no ringtone. Let me know what to do.
PS: I am fedup with this phone. The worst phone of my life.

By "automatically stops ringing", I'm assuming that it begins ringing then stops without you doing anything. Is that correct? There could be a couple of reasons for this happening. Firstly, the ringtone you have selected might only ring for one or two times then stop on its own. Secondly, you might have to contact your carrier to have the time for the ringtone to ring extended. Most carriers will allow up to 30 seconds or ring time but that may not be what you have; you might have less and would have to have it extended through them. Thirdly, as soon as you touch the touchscreenm, the phone will stop ringing. This is whether you intentionally touch it or even if you just touch it while taking your phone out of your pocket, so be very careful to not touch the screen.
I hope my suggestions help you. Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Trouble with a If conditional using string methods.

Hello Everyone,
I am having trouble with an If statement. I want to compare a string variable to two values using the or operator. I have found the || may not be applied to string.equals. Would neone happen to have a different method? Code below:
check = ("C".equals(option)) || ("F".Equals(option));

jverd wrote:
Please paste in the exact, complete error message.
One thing that's definitely wrong is the capital E in your second Equals. I don't know if that's causing the problem though.Also note that, once you get it to compile, if you don't remove the semicolon after the if statement, you won't get the behavior you want.

Trouble with video on Skype using lion os

I am having trouble with video using skype. I can only use the facetime video and can't expand the screen. I have tried removing and reinstalling skype

use these commands when your are in a video session. (under video) in facetime

HT4623 Anyone have trouble with iPhone 5c when using Siri?

Anyone having with iPhone 5c when using Siri?

I have a problem when I am using the SIRI and have # contacto, for example mark with siri #995012607.

I'm using internet explorer(yuk!!) and am having trouble with getting back my search engine "google" and all i get is "blank page", can u help?

First of all, forgive me cuz I'm probably NOT the sharpest "chip in a laptop" but I use Internet Explorer as my ISP(I've heard that GOOGLE CHROME is soo much better??) and Google as my search engine. For some reason(I know, probably USER idiot!!) even though I have set in my "internet connections" tab, www.google.com chosen, the minute I click a new tab to look for something else, that dreaded "about blank" or maybe "blank page" comes up.....wtheck???? Can u help me pleeez......thank u ..

It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
See also:
*http://kb.mozillazine.org/Error_loading_websites

Trouble with channels and clients using different 802.11 g/n adapters

Hi,
I have moved to a new home and I have a lot of problems with the wireless network
I have configured the airport extreme to use the "802.11n draft" with backward compatibility to b ang g at 2,4 GHz.
I had to manually select channel because the "Auto" option will probably use channel 6 and in this way all my clients are unable to connect.
After many tests I have found that I cannot use channels from 4 to 9 because my macbook airport card will not detect the wireless network. Channel 1 seems to be the best choice but it is used by other people in the near homes also.
With channel 1 my macbook is able to connect and mantain a stable connection, the signal is about 35%, unfortunally other clients (using windows XP, broadcom wireless adapter or a d-link DWA-140 USB key) are unable to have a good and stable connection: it is always "low", "very low" or not available
Using the D-Link DWA-140 wireless config utility I have discovered today that channel 5 seems to be the better for such device: using channel 5 it is able to connect windows clients from everywhere with good or excellent signal BUT my macbook wireless results completely dead instead :-/, the same for broadcom client.
D-link is unable to connect if I set channel 6 to 9 also.
Macbook is unable to connect to 5GHz 802.11n pre-standard, D-Link is able instead.
I have no cordless phones or running microwaves in the kitchen, the only thing I have is an home alarm using infrared and microwave sensors in each room. But they told me that they are using a frequency range much different from 2.4 GHz. Unfortunally I am unable to completely power off them and test some more.
May be that near homes have cordless phones, wireless routers or video/audio repetitors, I don't know. I also have much iron in my walls. It is very strange that d-link can use very well channel 5 while other wireless cards/clients are unable to find any network there.
I am going to become creazy... if I was able to explain the situation, could anybody help to investigate some more or try to solve?
thanks a lot in advance!
Fabio

may be I have found the cause of all these troubles: the alarm motion sensors installed in each room.
I have made a search in the Internet and I have found the technical details of my sensors: microwave tecnology used by them is exactly using the frequency of 2.45 GHz :-/
So I have moved outsite of my hause the Airport Extreme and notebooks to confirm my suppose:
all channels were perfectly working, "auto channel" selection was ok, macbook was able to connect at 5GHz 802.11n mode. Windows client was ok too with all wireless cards or USB devices.
The alarm sensors seem to be always active and seems not possibile to have them completely off when the alarm is not activated.
I think I am going to switch them to a different version that does not use 2.45 GHz microwaves.
It seems the solution to my troubles.
Hopes this helps somebody else.

Trouble with mapping CMR field using Sun One Studio

I am having trouble adding a cmr between 2 entity beans. It is a simple one to one relationship, navigatable in only one direction. In the database I have a foreign key defined between the two tables that store the data for the beans.
I add the relation by selecting the 2 beans and define it as one directional, one to one , with the name "bb". I then map the relationship field via the properties/As Sun One tab. I use the foreign key defined in the database. All seems to be well.
Using Sun One AppServer 7 and Studio 4
Upon deploying the application I receive:
CMP Mapping Error in bean Sites:: Warning: The field bb is not mapped.
Set the column mapping for the field.

The CMR/CMP mappings is very instable.
Sunone Studio 5 has a lot of bugs when mapping CMP/CMR but i never saw this one, try to upgrade.
Please vote for this bug. It's killing me!!!!!!!!!!!!!!!
http://developer.java.sun.com/developer/bugParade/bugs/4932495.html

Trouble importing third party classes & using linked list in j2me

Hi!
I need to use the linked list data structure in a j2me application im developing. Al long as I know, it is not included in standard libraries.
I found the "workaround", the substitution in Jade Laepaddon. This is actually a set of classes in a directory.
I know this is extremely dumb, but I have no luck impotring these classes in my project.
Im using the WTK2.0 to compile and execute the application, but I don't have an Idea how to add a directory in the CLASSPATH.
So, the actual question should be: how to include a directory of files, so that it can be imported with:
import dirName.*;
Thanks!

Tha import problem is solved, but I'm still not able to use the LinkedList class. In the jade/util/leap there is a LinkedList.java file, but I get an error :
/home/mile/WTK2.0/apps/myGame/tmplib/jade.jar(jade/util/leap/LinkedList.java):48: class LinkedList is public, should be declared in a file named LinkedList.java
(source unavailable)
/home/mile/WTK2.0/apps/myGame/tmplib/jade.jar(jade/util/leap/LinkedList.java):48: cannot resolve symbol
symbol : class List
location: class jade.util.leap.LinkedList
(source unavailable)
/home/mile/WTK2.0/apps/myGame/tmplib/jade.jar(jade/util/leap/LinkedList.java):48: cannot resolve symbol
symbol : class Serializable
location: class jade.util.leap.LinkedList
(source unavailable)
/home/mile/WTK2.0/apps/myGame/tmplib/jade.jar(jade/util/leap/Iterator.java):41: class Iterator is public, should be declared in a file named Iterator.java
(source unavailable)
when initialising an LinkedList type object.

Trouble with foul language when using dictation?

I've been using the dictation tool, which is remarkably useful. But it has a significant downside, which is that when I mistakenly hit the shortcut key (fn twice), and don't dictate, it begins inserting random words into my text. These range from "hey there" and other innocuous terms, all the way to four-letter words.
Both types of random insertions are bad, in part because I then have to go back through any transcribed text to extract the random insertions. But the four-letter words are obviously a major concern for my professional work.
I have tested to make certain that the random insertions aren't just misinterpretations of something I said. I left open a document I had been working on, placed the cursor in the middle of the text, and then hit the shortcut key. Pretty soon, in popped a word that would make my grandmother blush.
What's up with that?!?

Thanks for the reply.
Yes, I have cleared all cookies and reset Safari, several times.
I just discovered that having that box checked does NOT prevent me from
logging into e-mail, when using Firefox web browser, version 3.6.19
I was wrong to have made the statement about different browsers, in my previous posting.

[SOLVED] Trouble with atlas-lapack static library linking to our .so

I'm trying to compile a massive hunk of software, one small piece of which is libgraphics.so. The build system, based on cmake, is trying to link a static library from lapack to make the libgraphics.so but failing with this:
Linking CXX shared library libgraphics.so
/usr/bin/ld: /usr/local/lib/liblapack.a(dgetrf.o): relocation R_X86_64_32 against `.rodata' can not be used when making a shared object; recompile with -fPIC
/usr/local/lib/liblapack.a: could not read symbols: Bad value
collect2: ld returned 1 exit status
make[2]: *** [graphics/libgraphics.so.3.1.0] Error 1
Thinking lapack.a somehow wasn't built right, after some fussing I ended up removing the blas, lapack, and atlas libraries and reinstalling them from the AUR atlas-lapack (ver 3.8.3) package. This is where they had come from originally just a few months ago, when I first tried to compile this massive app. Maybe now something in atlas-lapack got fixed? No. Apparently it builds static libraries without -fPIC, or something else is going on to result in this error. I didn't see anything obvious in the PKGBUILD file to change.
Now I'm stuck, out of further ideas to try...
Last edited by darenw (2010-10-06 20:48:40)

Problem solved. CMake was finding a stray old .a file (w/o any .so files with it) in /usr/local/lib while the good new .a and .so files were in /usr/lib. Deleted the old .a, reran cmake. Now make runs fine. -fPIC had nothing to do with the solution.

Safari 7.0.2 Location bar will not stay open and I must use command L each time to with go back or use the address bar

Safari 7.2.2 loction bar wil not stay open and I must use command L to either go back or to use the address bar

View > Show Toolbar

Trouble with play back

I have two monitors one computer monitor that I have hooked straight into my computer. The second a TV I have hooked to my sony DSR 11 and DVD player. I use the TV as a playback monitor. My problem is at times the TV won't play back from the time line. It will freeze the last spot on the time line. You can hear the audio on the TV but the picture is frozen. I can go to a differen't sequence and that sequence plays back fine. Is there a better way to use the TV as a Playback Monitor or am I doing something wrong.

What video format is your Sequence set for? Is the Canvas window set larger than 100% or larger than "Fit to Window?" How many overlays are turned on in the Canvas window?
-DH

Trouble with Z10 backing up using link

Similar Messages

Maybe you are looking for