Troubles with auto update mechanism and Camera Raw 7.3 update

Greetings,
Attempted an update using the update mechanism from Bridge.  CS6 Design Premium on Mac.  Received a couple error messages when it completed.  Foolishly I did not write down the details. I thought I could just run the update again.  When I attempted this, received mesage saying I was updated. But when I use Camera Raw plug-in within Bridge, it says I am still using version 7.2...
How may I attain a sucessful Camera Raw 7.3 upgrade?
I also use Lightroom which sucessfully upgraded,to 4.3 (with Camera Raw 7.3), but I often too use the Camera Raw Plug-in from within Bridge and would like to be on the same 'level'.
I thank you for any insight.
Best regards,
Alan

I updated CR to 7.3 yesterday and had nothing but problems after that.  When I opened a photo in CR, it still showed 7.2 even though I got a message that said update successful.  I had lots of problems using bridge which caused my computer to freeze.  Using Mozilla Firefox was also freezing.  I had to actually use the "off/on" button on my computer tower to shut it down.  I was unable to restart.  Lots of problems.  Finally used "system restore" to an earlier date (which wipes out all updates back to the date I chose), and that worked.  NO more problems.  I'm waiting a while before trying to update CR to 7.3.

Similar Messages

  • Canon EOS 5D Mark II with Adobe Bridge (CS4) and Camera Raw 5.4

    I use a Canon EOS 5D Mark II and store in RAW-format.
    The camera is updated with latest software etc.
    I have the Adobe Design CS4 package on my computer and updated to the camera raw 5.4 version (bridge/photoshop/etc).
    All this is updated to last versions / updates etc.
    I upload my pictures from the camera to my computer.
    When I inspect the files with the Canon software such as "Digital Photo Professional 3.6.1.0" or "Canon Utilities ZoomBrowser EX 6.3.1" (this are the latest versions and updates)  the files are copied correct to my computer.
    The files can be opened with the canon software without any problem and can be modified and converted and all normal operations can be performed.
    The files can also be converted to ".jpg" and no problem occurs.
    The problem starts after the folder with the pictures (in RAW-format) has been opened / viewed in Adobe Bridge or after Adobe bridge is started.
    After starting and viewing with bridge the folder only some of the file become corrupted and cannot be used anymore.So the majority of the files remain OK but some files become corrupt.
    A part of the picture is visible partly, the remaining part are lines, dots, squares etc and the divisions of correct picture and corrupted seems to be at random. There is no structure in the way the corrupted file are shown in bridge. Please look at the enclosed picture in this message.
    The files can be opened in Camera Raw and Photoshop but they show the corrupted file and can be stored etc.
    But the picture is destroyed.
    Does anybody have a sollution or similar problems?
    Best regards

    There are forums for Bridge, Camera RAW and Photoshop.
    Any of them would be better than posting here.
    Bob

  • Photoshop 12.0.2 and Camera Raw 6.3 updates available

    http://www.adobe.com/downloads/updates/
    Camera Raw 6.3 update details here:http://blogs.adobe.com/lightroomjournal/2010/12/lightroom-3-3-and-came ra-raw-6-3-now-available.html

    I have just installed these updates (& Lightroom 3.3 after them) & I'm now getting an error message when CS5 loads...
    "Photoshop.exe Unable to locate component."
    "The application has failed to start because MiTwain.dll was not found. Re-installing the application may fix the problem."
    Following clicking on the error message box to close it CS5 does go on to load.  I can then open files. But as I don't know what the error relates to I am reluctant to try any image work.   
    I have never had this error message before, and have had no problems at all with CS5 prior to this (apart from it running slow-ish on my old machine).
    Can anyone shed any light on this error & what it meeans - do I really need to re-install?
    Thanks for your help in advance!
    Myke

  • Adobe DNG Converter and Camera Raw 4.5 update available

    See: http://www.adobe.com/support/downloads/detail.jsp?ftpID=3940 for both.
    See: http://www.adobe.com/support/downloads/detail.jsp?ftpID=3942 for Camera Raw 4.5 update only.
    Neil

    >> Yesterday's ACR+Photoshop+Bridge works fine here
    I am talking about very specific conditions outlined here that spanned two intel boxes on trustworthy 10.5x installs...
    Buko, "Bug: Multiple Files Open ACR Crashes Photoshop..." #1, 10 Jun 2008 2:57 pm

  • Lightroom3 and Camera Raw 6.1 update

    I am installing LR3. The "Readme" notes advise that the Photoshop Camera Raw update must be installed "...to ensure compatibility with Lightroom Develop settings."
    However, the info on the download page for the 6.1 CR update advises that this update is not compatible with versions of Photoshop earlier than CS5.
    CAn anyone advise what is the situation if I am still using Photoshop CS4?
    Thanks

    You can use all of the new LR 3 image processing goodies except for profile-based lens corrections and perspective transform corrections.
    Specifically, everything except:
    - Controls in the "Profile" section of the Lens Correction panel.
    - Controls in the "Transform" part of the "Manual" section of the Lens Correction panel.

  • "Edit In" Photoshop CC not working for RAW or DNG files after applying LR 5.3 and Camera Raw 8.3

    I just applied the Lightroom 5.3 and Camera Raw 8.3 updates and now am no longer able to open RAW or DNG files into Photoshop CC. When I select a file and choose "Edit In" Photoshop, photoshop will launch, then nothing will happen. After 2 to 5 minutes, an error will popup in Lightroom saying "The file could not be edited because Adobe Photoshop CC could not be launched." An error I've never seen before. When I click "Ok", Lightroom will show that it's "preparing a file for editing" in the upper left, it will create and save a psd to disk and in the catalog (another new behavior), then it will open in photoshop. All other file types (jpgs, tiff, psd) seem to work/open fine between applications. No difference if I open photoshop prior to selecting "Edit In". Selecting "Edit In" other applications, like Viveza, work fine.
    I tried first deleting preference files in both applications. No luck. Ditto for plugins. Notta. Eventually I completely uninstalled and fresh installed Photoshop, Lightroom, and Bridge from the cloud. Same deal...can't open raw/dng files into Photoshop.
    I'm at a complete loss, dead in the water, with a mountain of editing work piling on top of me. Kicking myself for applying the upgrades, which I had been delaying for some time to avoid just such a cluster%#$. Ugh.
    I'm on a PC running Windows 7 64bit.
    Any suggestions would be greatly appreciated.

    In the normal situation, LR needs to see a PS installed for it to detect the Edit In PS option is possible, so if you uninstall both, then install PS, first, then LR.  Of course with this release there may be some hiccup that requires installing either one or the other, again, but if you've uninstalled both and are reinstalling both, then install PS, first.

  • Camera Raw 5.7 Update will not install

    I have a MacBook Air with Bridge 4. The Camera Raw 5.7 Update will not install. I've tried it both through Help/Updates and Software Update. Any ideas?

    The Camera Raw 5.7 Update will not install. I've tried it both through Help/Updates and Software Update. Any ideas?
    You can also install it manually.
    Be sure to have the latest download, then open the DMG file (should do so automatic) and grab the plug in file to drag it in the correct place.
    This is the path:
    Library (That is on root level, not your user account library!) / Application Support/ Adobe? Plug-ins / CS4 / File Formats.
    In this folder should only be one version present and it is called "Camera Raw.plugin" Under info it should say version 5.7.

  • Camera Raw 6.5 update

    Tried to update PS CS5 camera raw 6.5 Update -installation failed (mac)

    Reason of failure is that you already have updated ACR on your system.
    Do you remember how you installed 6.7 (manually/Help->Updates).
    Regards,
    Ashutosh

  • HELP!!??? Trouble with PS CS-6 displaying/ producing grainy and pixelated images after being imported using PS Bridge and Camera-Raw 8.5

    Help!??? I am having trouble with PS CS-6 displaying/ producing/ saving grainy pictures when import NEF files!!!
    Hi all,
    When I import all NEF or RAW files into CS6 from Bridge and Camera Raw from the Nikon D200 and D5000, they become grainy/ pixelated.  However, RAW files from the D800 did not have problem. I set the Color Space in my Nikons to AdobeRGB, in PS Camera Raw 8.5 to AdobeRGB, in PS CS-6 ColorSpace to AdobeRGB, and Save As Jpeg with Max quality (12). When comparing between CS-6 produced file and the original, I can see a big drop in quality and the picture become grainy and pixelated. What can I do to make this right? Any help/ suggestion is appreciated.
    Thank you!
    HN

    Can you show us a screen-shot of the raw in Camera Raw that shows this noise, or if you only see it in the saved JPG, then show us a side-by-side of the raw in Camera Raw and the JPG?  Show the same area of the photo and zoom to 100%.
    It is normal for raw photos to have grain but you can mostly remove it with the Luminance Noise-Reduction sliders in the Detail tab of Camera Raw.
    The amount of grain depends on the ISO sensitivity setting on the camera.

  • Can't open canon g16 raw files.  I have updated to Adobe camera raw 8.2 and am working with PS CS6.

    Here is my issue, I can't open the Raw files from my new Canon G16.  I have run all the Photoshop updates and even installed the Camera raw 8.2 update but still cannot open my raw files.  The will open in Canons digital photo professional program so I know they are not broken files.  I have even installed the DNG converter and they will not even open with that.  What am I doing wrong?  I bought this camera specifically for the ability to shoot in raw.  My canon 60d raw files work fine.

    Why on Earth did you upgrade only to ACR 8.2 ?
    The current version of ACR is ACR 8.4.  You should ALWAYS update to the latest version.  Once a camera model is supported, it will be supported in all subsequent releases of ACR.
    Beside new camera support, each ACR update contains any number of unannounced, unheralded bug fixes, improvements and enhancements.
    What is the exact version of your OS and of your Photoshop CS6? For instance, if you're on a Mac, you should be running Photoshop CS6 13.0.6.  I can't remember offhand what the latest version for CS6 is.
    Did you install ACR correctly.  ACR 8.2 should work for your camera (but update ACR anyway).  What version shows up when yo go to About Plug-in… > Camera Raw.
    You of course need to relaunch Photoshop, maybe even reboot your machine, and then Purge the Cache in Bridge.
    Next time you ask a question, please give sensible, complete and detailed information from the beginning:
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Camera raw 8.6 update fail and photoshop update

    hi everyone
    i update my photoshop and camera raw but both of them prompts failure and i cannot open my sony a7s raw to edit... is there someone encountered the same? i'm using windows 7...
    thank you very much

    9pines wrote:
    1.— I mentioned in my original note that Help >> Check for Updates says everything is up to date on my system in both Bridge and Photoshop.
    2.— Also, I mentioned that I grabbed the DNG update today. I know the webpage says it contains Camera Raw, but it doesn't. If I load a RAW image into CR, CR says it's at version 8.5.
    3.—There were many other users who had this problem with 8.5, too. I beginning to think Adobe doesn't really care for users who haven't joined the CC bandwagon.
    1.— That just means your install is messed up.  It works on any properly maintained system I've tried so far.  Is Photoshop updated to CS6 13.0.6?
    2.— After downloading, did you decompress the download and mounted the .dmg file on your desktop AND ACTUALLY installed the new ACR plug-in?  It DOES NOT magically get installed, you know.
    3.— You are wrong.  Adobe doesn't care much about any of their customers, whether subscribed to the Cash Cow or not.
    4.— You are not addressing Adobe in these user forums, so drop that attitude.  Your troubles are caused by user error and inexperience.

  • PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue

      Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
    According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files.  I have downloaded Camera Raw 4.6 Update. When
    I try to open Nikon D810 NEF files, I get Photoshop CS3  error that says
    "cannot complete request your because it is not the right kind of
    document. These NEF files wont open in Adobe Bridge at all.  What am I doing wrong?

    Hey,
    Before I purchased, let me get your thoughts on another option that just occurred to me which involves:
    1)Editing my D810 NEF files in LR 5.6, which I have, then exporting/saving the edited files as JPEGs.
    2) Doing any additional editing, as necessary (i.e. that might require layering or selections..etc) , with the JPEGs  with Bridge or PS CS3. 
    This method wont involve any additional software purchase now.. right?    Am I missing anything.   here?    Since my final output to my customers are JPEGs any way, wont this work?   Will I be at any disadvantage.   Am I missing anything.   here? 
    From: ssprengel <[email protected]>
    To: charles cash <[email protected]>
    Sent: Monday, October 6, 2014 9:49 AM
    Subject:  PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue
    PS CS3, Camera Raw 4.6 Update and Nikon D810 NEF File Reading Issue  created by ssprengel in Adobe Camera Raw - View the full discussion  
    You can buy it from here:
    http://creative.adobe.com/plans
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6795004#6795004
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: 
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link. 
    Start a new discussion in Adobe Camera Raw by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible -  this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

    HELLO, i wand do make an update " camera Raw" with the adobe installer - it was not possible -  this was the massage -Photoshop Camera Raw 6.7-Update Installation fehlgeschlagen Fehlercode: U44M1P7

    You need to buy PSE13. But you can continue with PSE9 if you download and install the free DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will work with yoir existing software(keep your originals as backups and for use in the camera manufactures software)
    Windows download (.exe file) click here DNG Converter 8.8
    Mac download (.dmg file) click here DNG Converter 8.8
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

  • Camera Raw 7.3 Update replaced Photoshop CS6 Standard with CS6 Extended Trial version

    How do I get back to Photoshop CS6 Standard edition after Camera Raw 7.3 update?
    After installing the Camera Raw update photoshop now runs as the Trial version of Photoshop Extended.

    I upgraded CS6 and Lightroom 4 today and then when restarting Photoshop CS6 this evening I get a dialog about registering with my e-mail for Photoshop Extended Edition Trial.
    I have never owned the Extended edition and did the update from my existing product using the Adobe Update manager. There should have been no reason for this mistake to occur.
    I've done upgrades like this many, many times before and have never had my system react this way. You clearly have a bug in your update process and should fix it pronto. Do you know how confusing it is to get a dialog like this? Should I let it register me for a product I don't own? Is that going to somehow trash my legitimate license (now there's the process of activation, I'm always concerned that I'll mess things up and end up unable to use Photoshop until support can help me out)
    I'll go find my serial number and re-enter it, but I think this is a serious bug - and will make me much more cautious about waiting to apply updates until I've read the forums to make sure it's safe to do so

  • Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list

    Installed Lightroom 5.7 Update and Camera RAW 8.7 But still will not recognise my Canon 7D MkK ll even though this is now on the list- what can I do?
    Operating System OSx Yosemite IMac.

    What exactly does "not recognise" mean, Kathy?
    You're on Mac (thanks for providing that detail): are you getting a "could not be read" message? If you are, it's a write permissions issue with the destination. Change the permission, and all should be well.

Maybe you are looking for