Troubles with BRM Integration (Portal)

Hi
Currently we are Integrating BRM 7.3 with Siebel 8.0 and other third parties with BPEL (SOA Suite 10.1.3.4), in many procesess BRM is the trigger of the message it means that BRM calls a WSDL of BPEL.
BRM guys told me that anytime that BRM calls BPEL is through EAI Component and they have to configure a new EAI component per each integration with BPEL (only when BRM is the trigger). They also told me that EAI is a limited component that allows just few instances, it means that BRM can not be the trigger of more than 8 (more less) processes.
In my perspective it sounds illogical, but i wanna ask if someone have experience in this kind of Integration..
many thanks
@nfed..

You may specify the module the user have to authenticate with adding in the url parameters module=LDAP for instance.
Another solution is to specify an authentication level in your authentication module like 0 for anonymous and 1 for LDAP or any other module you are using. Then in the login url, you add the parameter autlevel=1 (require to authenticate against a module for which the level is at least 1).

Similar Messages

  • Trouble with dreamweaver integration

    I installed Dreamweaver CS3 a while ago and was using it with
    Fireworks 8. I just upgraded to fireworks cs3. I changed the
    preferences so Dreamweaver looks for cs3 instead of 8. But when I
    go to edit a png from the link in dreamweaver, I don't have full
    access to the png. My graphic is there, but I can't access the
    popup menu. If I just open the same file in fireworks, it works
    just fine. Does anyone have any ideas how to fix that?

    Do you have a Site defined in Dw? This is required I believe.
    If not, then define the site then follow along below.
    Then reopen the original .png file, save it under a 'folder'
    under the site.
    Resave it out as gif or jpg to a folder under the site.
    Now in Dreamweaver, select the image, go to the Property
    Inspector, and click the Fw icon command. This will launch Fw,
    using the source .png file.
    In Fw you should notice a few extra items - upper left (Tab
    Bar) should have a Done command button with a line of text to the
    right of it saying 'Editing from Dreamweaver'. Click Done when you
    know you are finished with editing to close down the file.
    On the right (Tab Bar) you should see an up/down 'Get/Put'
    File Management icon command. This allows you to seemlessly make
    edits to the source .png file 'Put' it back to the dreamweaver site
    and upate the image in your html file.
    File > Update within Fw also equates to 'Pushing' both the
    source and the optimized image back to your Dw site.
    Hope these makes sense.
    h

  • Trouble with fireworks integration

    I installed Dreamweaver CS3 a while ago and was using it with
    Fireworks 8. I just upgraded to fireworks cs3. I changed the
    preferences so Dreamweaver looks for cs3 instead of 8. But when I
    go to edit a png from the link in dreamweaver, I don't have full
    access to the png. My graphic is there, but I can't access the
    popup menu. If I just open the same file in fireworks, it works
    just fine. Does anyone have any ideas how to fix that?

    Try selecting the fireworks file in question ( from folder it
    is contained in),right click ,select get info ,Then select open
    with, select fireworks cs3 and select (Use this application to open
    all documents like this. This should change it over to a cs3 file
    and then it should be recognized by dream . I am not positive about
    this but I went through the same thing about a year ago and I think
    this is how I got around the problem.

  • Coherence integration with oracle weblogic portal for Session management

    Could you please let me know how to configure coherence integration with oracle weblogic portal for Session management. Its very urgent. please help.

    Please take a look at the following web page -
    http://coherence.oracle.com/display/COH35UG/Coherence*Web+Session+Management+Module
    -Luk

  • BPM integration with BRM

    Hi All,
    I am looking for a blog for complete scenario which includes business rules used in BPM,that is ,complete STEP BY STEP blog for BPM integration with BRM.Searched a lot but finding either BPM or BRM or BRM already created without mentioning steps and imported in BPM process.
    Can you help me with a complete blog for BPM integration with BRM STEP BY STEP blog?
    Thanks in advance

    Hi,
    Please check if the below articles are useful
    http://scn.sap.com/thread/3446620
    http://scn.sap.com/docs/DOC-47066
    http://scn.sap.com/docs/DOC-4588
    Regards,
    Sriram

  • BPM integration with BRM step by step

    Hi All,
    I am looking for a blog for complete scenario which includes business rules used in BPM,that is ,complete STEP BY STEP blog for BPM integration with BRM.Searched a lot but finding either BPM or BRM or BRM already created without mentioning steps and imported in BPM process.
    Can you help me with a complete blog for BPM integration with BRM STEP BY STEP blog?
    Thanks in advance

    Hi,
    Please check if the below articles are useful
    http://scn.sap.com/thread/3446620
    http://scn.sap.com/docs/DOC-47066
    http://scn.sap.com/docs/DOC-4588
    Regards,
    Sriram

  • Enterprise Portal integration with E-Sourcing Portal

    Hi,
    Has anyone done Enterprise Portal integration with E-Sourcing Portal.How can we use the E-Sourcing portal url in Enterprise Portal?
    Thanks,
    Rajani

    Hello Rajani,
    For Connecting  web based Application we have to use AppIntergator Application.
    Please go thorugh the blog and implement the same thing its many connect to your java portal.
    blog is Integrating your Web Front-ends into the SAP Enterprise Portal using the Application Integrator
    Please go through the below blog where its define how to pass user and password it the url iview.
    SP12/SP20: Setting URL Dynamically in URL iView
    Thanks
    Chittya Bej
    Edited by: Chittya Bej on Apr 5, 2010 11:31 AM
    Edited by: Chittya Bej on Apr 5, 2010 11:33 AM

  • How to test whether AIA got integrated with BRM system successfully

    Is there a procedure to test whether AIA got integrated with BRM system successfully.How can i test whether BRM Adapter is able to connect to BRM system.
    Thanks well in advance
    Santosh

    Hi Santhosh,
    I hope you are using AIA 2.0/2.0.1 for Comms and trying to integrate BRM with Siebel.
    1. To check BRM & Siebel integration using AIA. (BRM is the Product master gets synched with Siebel.)
    a) Create a new Product in BRM pricing center(Provide product name, Service type)
    b) Select Event(Single time purchase event)
    c) Provide rating for the product
    d) Commit after product creation(Check in BPEL process, whether all the instances are went through successfully)
    e) Check Siebel Catalog, whether product got synched from BRM
    2. To check whether BRM Adapter connected to BRM,
    a) Login into Oracle Application server
    b) Select OC4J instance, where your AIA is running
    c) Select Applications
    d) In view drop down select "StandAlone Resource Adapters"
    e) Check the status (green or red) in the installed BRM adapter
    If you haven't deployed BRM Adapter read the installation guide to deploy it.
    Regards,
    Ziaur Rahuman

  • Integrating display templates with the Netweaver Portal

    Hi friends,
    can you please help me how to the integrate SAP xMII display template with the Netweaer portal
    Thanks
    Srikanth

    Hi Srikanth
    In case of integrating into NW Portal,
    1. U first need to create an IRPT page which contains the desired Display Templates is/are present.
    2. Then in the NW Portal <b>Content Administration</b>, create an iView with URL configured in this iView, where the URL should be that path name of target source where the IRPT page is stored such as URL : http://<servername>/<TargetFolder>/<YourIRPTPageName>.irpt
    3. Do the rest content objects like Page, WorkSet and Role after u hv successfully configured iView with that IRPT page (u may test this by clicking "Preview" button)
    Regards
    Som
    Please feel free to ask furthers, if necessary

  • Netmeeting Integration with Sun One Portal Server 6.2

    Hi,
    we are trying to integrate MS Netmeeting with Sun one portal server 6.2,using netlet ,has anybody done similar things earlier .then plz help me,
    or any other solution to call netmeeting from portal.

    Suggest trying other forums, as we're specialized into Messaging Server, not portal nor Netmeeting

  • Integrating SAP CRM with IBM Websphere Portal

    Hi,
    Is it possible integrate SAP CRM with IBM Websphere Portal??
    if possible please share the knowledge you have..
    Thanks in advance..
    Naresh

    P L E A S E   D O  N O T  C R O S S  P O S T  I N   D I F F E R E N T  F O R U M S

  • Troubles with the creation of New Custom Adapter for NW 7.1

    Hi guys !!!
    I have some troubles with the creation of a new custom adapter for NW 7.1. I have followed some pdf and notes, like :
    [Upgrade an SAP NetWeaver PI 7.0 Adapter to SAP NetWeaver PI 7.1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d0667f56-96c7-2b10-0e9a-c40fbd523f4d]
    note : 1004000
    I have all the materials to make the custom Adapter ( like file .sca with all .rar and .sda , like file sample_ra.rar with all the file .java, like all the libs for the projects ) and I have make it !!! But, when I try do deploy it, i recieve a warning that i don't understand, this is the warning :
    S U M M A R Y
    ~~~~~~~~~~~~~~~~~~~
    Successfully deployed:           0
    Deployed with warnings:           1
    Failed deployments:                0
    ~~~~~~~~~~~~~~~~~~~
    1. File:C:Users
    maienzaDesktopCreazione del SDAPI71_AF_myFirstCustomAdapter_ver_2.0.sda
         Name:PI71_AF_myFirstCustomAdapter_ver_2.0
         Vendor:sap.com
         Location:SAP AG
         Version:7.1007.20090310105326.0000
         Deploy status:Warning
         Version:NEW
         Description:
              1. Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.cm.deploy.impl.LifeCycleManagerStartVisitor.visit(LifeCycleManagerStartVisitor.java:34)
         at com.sap.engine.services.dc.cm.deploy.impl.DeploymentItemImpl.accept(DeploymentItemImpl.java:83)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcessLCMDeplItem(DefaultDeployPostProcessor.java:80)
         at com.sap.engine.services.dc.cm.deploy.impl.DefaultDeployPostProcessor.postProcess(DefaultDeployPostProcessor.java:56)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doPostProcessing(DeployerImpl.java:741)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.performDeploy(DeployerImpl.java:732)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.doDeploy(DeployerImpl.java:576)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:270)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImpl.deploy(DeployerImpl.java:192)
         at com.sap.engine.services.dc.cm.deploy.impl.DeployerImplp4_Skel.dispatch(DeployerImplp4_Skel.java:875)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Result
    Status:Warning
    I have see in the nwa if there are some applications or services that are stopped but all the necessary it's started, just one question : in the pdf for upgrade from 7.0 to 7.1 no one speaks about ejBean or about a creation of it ... it's necessary an ejBean ?? Beacause in the file .sda of the file .sca that i have downloaded there are more of the adapter with ejBean ....
    Antonello

    Hi,
    the adapter metadata it's been created but my service is still stopped; when I try to start it, in the NDWS -> Deploy view -> tab Repositary view, I receive this errors, one after the other, cause I try to start it 3 times and in each time I received 3 differents errors :
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/applicationjars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.container.DeploymentException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:893)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl.makeStartInitially(ContainerInterfaceImpl.java:771)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.makeStartInitially(StartInitiallyTransaction.java:184)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:145)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)
    Caused by: com.sap.engine.services.ejb3.container.ActionException: Unable to create folder /usr/sap/DXI/DVEBMGS00/j2ee/cluster/apps/sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0/EJBContainer/jars
         at com.sap.engine.services.ejb3.container.FSMakeFolder.perform(FSMakeFolder.java:48)
         at com.sap.engine.services.ejb3.container.CompositeAction.perform(CompositeAction.java:81)
         at com.sap.engine.services.ejb3.container.ContainerInterfaceImpl$Actions.perform(ContainerInterfaceImpl.java:887)
         ... 30 more
    Exception has been returned while the 'sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0' was starting. Warning/Exception :
    [ERROR CODE DPL.DS.6193] Error while ; nested exception is:
         com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5030] Clusterwide exception: server ID 3999650:com.sap.engine.services.deploy.exceptions.ServerDeploymentException: [ERROR CODE DPL.DS.5082] Exception while validating application sap.com/PI71_AF_myFirstCustomAdapter_ver_2.0.
    No one of the [EJBContainer] containers, which processed it, returned deployed component names.
    The registered containers in this moment were [CTCContainer, com.sap.caf.um.metadata, com.sap.security.ume, com.sap.security.login-modules, app_libraries_container, Cache Configuration Upload, servlet_jsp, dbcontentcontainer, connector, Cluster File System, JMSConnector, MigrationContainer, Monitoring Configurator, dbschemacontainer, appclient, orpersistence, PortalRuntimeContainer, JDBCConnector, EJBContainer, metamodelrepository, webservices_container, scheduler~container, ConfigurationsContainer, Content Container].
    Possible reasons :
         1.An AS Java service, which is providing a container, is stopped or not deployed.
         2.The containers, which processed it, are not implemented correct. They deployed or started initially the application, but didn't return deployed components in the application deployment info.
         at com.sap.engine.services.deploy.server.utils.ValidateUtils.missingDCinDIValidator(ValidateUtils.java:80)
         at com.sap.engine.services.deploy.server.application.StartInitiallyTransaction.prepare(StartInitiallyTransaction.java:149)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitiallyGlobal(StartTransaction.java:449)
         at com.sap.engine.services.deploy.server.application.StartTransaction.doStartInitially(StartTransaction.java:437)
         at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:178)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:420)
         at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:445)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.super_MakeAllPhases(ParallelAdapter.java:337)
         at com.sap.engine.services.deploy.server.application.StartTransaction.makeAllPhasesImpl(StartTransaction.java:550)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:251)
         at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:392)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3389)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3375)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3278)
         at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:3251)
         at com.sap.engine.services.dc.lcm.impl.J2EELCMProcessor.doStart(J2EELCMProcessor.java:99)
         at com.sap.engine.services.dc.lcm.impl.LifeCycleManagerImpl.start(LifeCycleManagerImpl.java:62)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImpl.start(RemoteLCMImpl.java:45)
         at com.sap.engine.services.dc.lcm.impl.RemoteLCMImplp4_Skel.dispatch(RemoteLCMImplp4_Skel.java:233)
         at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351)
         at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62)
         at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37)
         at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872)
         at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53)
         at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58)
         at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108)
         at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304)

  • How to connect SAP R/3- System with SAP NetWeaver Portal (2004s)?

    Hello to all,
    sorry, can someone help me? How can I connect SAP R/3- System with SAP NetWeaver Portal (2004s)?
    Thanks and regards,
    Galyna

    Hi,
    In previous link contain this info
    This describes how to connect an SAP R/3 system to SAP NetWeaver Portal using an iView
    1)      Go to System Administration
    2)      Go to System Configuration
    3)      Go to Portal Content (Right Side Panel), open that folder.
    4)      Right Click on Portal Content, a Panel is displayed select "System (from Template)".
    5)      That will display a new view on right side, now select "SAP system using dedicated application server" from
    the existing templates. (Other templates are possible - for example, load balanced or through a SAProuter connection string).
    For this exercise, we'll use the simplest type.
    6)      Choose next
    7)      Give the System Name and System Id (which are mandatory fields) incase you want to give any brief notes
    about the system then give them in the "Description" field.
    8)      Open the Newly Created System.
    9)      Now when you want to create a New System, you have to fill four Properties they are:
    "Connector" - contains basic connectivty details
    "Internet transaction Server (ITS) - if you wish to use SAPGUI for HTML and/or IACs",
    "Web Application Server" - if you wish to access BSPs and/or Web Dynpro for ABAP and
    "User Management".
    You also need at least one "System Alias" has to be defined from the Display drop down menu.
    Make sure you have set end user access in the Permissions drop down menu to all users who need to access the system
    10)  Select "Connector" property, now fill the required fields such as:
    a)      Application Host (should be fully qualified hostname) - Give the R/3 "Application Name",
    which can be obtained from the SAP Logon Pad (check what R/3 system you are using, right click on it , go to the properties,
    it will open a window which has the Application Server Name.
    b)      Logical System Name - Give the logical name as defined in the backend system
    c)      SAP Client - Check the Client in the backend system and give the appropriate number (3 digits)
    d)      SAP System ID(SID)* - Check the R/3 properties and give the check for System ID
    e)      System Type* - Since we are connecting to R/3, select SAP_R3 system.
    f)       System Number - This is a two digit number that you can find in the SAP Logon Pad
    11)  Select "Internet transaction Server (ITS)" property, now fill the required fields like
    a)      ITS Description à Give some Description
    b)      ITS Host Name - Same as "Application Host" of R/3 (when integrated ITS) and should be attached with the
    port number of ITS Server (to get port number detailed description is given below). ex: hostname : port number
    c)      ITS Path - To get the path along with the port number you have to Log on to R/3 system. Use the
    Transaction Code "SICF", it opens a new window go to:
          default_host -> sap -> bc -> gui -> sap -> its -> webgui -> SAP GUI for HTML -> right click on
    that and click "Test Service'. This will open a new window, on the address bar you will find the "port number", and
    the path something like (/sap/bc/gui/sap/its/webgui). Use the path after the port number.
    d)      ITS Protocol - There are two protocols "http" & "https", select the appropriate protocol which is
    visible when you opened "Test Service" window.
    12)  Select "Web Application Server" property , now fill the required fields like
    a)      Web AS Description -> Give some Description
    b)      Web AS Host Name - same as ITS Host Name
    c)      Web AS Path - usually /sap/bc/bsp/sapd)*    
    Web AS Protocol - should be same as the ITS Protocol.
    13)   Select "User Management" property, now fill the required fields like
    a)      Authentication Ticket Type - Since we are not using SSO leave the field
    empty i.e. put in select mode. (Please note that longer term you will probably want to use SSO)
    b)      Logon Method - Select UIDPW.
    c)      User Mapping Type - In case you have administration rights then you choose "admin" or in case you
    just have user rights then choose "user", better go for "admin/user".
    14)   Since all the required fields are filled appropriately now create a System Alias name, this can be done by following steps:
    a) go to Display -> Select "System Aliases" give some Alias Name, let's call it "SAP_R/3"
    15)  Now that System is created we have to create a iView which will display the given Transaction Code.
    16)  Go To "Content Administration".
    17)  Go To "Portal Content".
    18)  Go to Portal Content (Right Side Panel), open that folder
    19)  Right Click on Portal Content, a Panel is displayed select "New" -> iView
    20)  Select iView template, click next
    21)  Select "SAP Transaction iView" from the list of templates available. Click next.
    22)  Give the iView name and iView ID. Incase you want to give any brief notes about the iView then give it in "Description" field. Click next
    23)   Select "SAP GUI for HTML" radio button. Click next
    24)  Now select the system which you have create "SAP_R/3", give some Transaction Code, say SE12 (Dictionary Display). Click next and Finish.
    25)  Now Preview the iView
    26)  You will see a new Window where in SE12 Dictionary Display window is displayed.
    Regards,
    Senthil K.

  • How to Use Interactive Forms in BSP Applications - trouble with demo

    Is anyone else out there having trouble with the subject how to guide? https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0e58022-2a39-2a10-69a8-c1a892e2b3f4
    I think I have everything built out correctly but I get the following run time error.
    Business Server Page (BSP) error
    What happened?
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
    An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause
    Exception Class CX_SY_REF_IS_INITIAL
    Error Name 
    Program Z_PROCESS_BOOKING_FORM========CP
    Include Z_PROCESS_BOOKING_FORM========CM002
    ABAP Class Z_PROCESS_BOOKING_FORM
    Method DO_REQUEST
    Line 33 
    Long text An attempt was made to execute a dynamic method callon an initial(NULL-) object reference. The reference must refer to an object.
    Following is my code:  line 33 reads as strChecked = node->get_value( ).
    method DO_REQUEST.
    *CALL METHOD SUPER->DO_REQUEST
      data: bookingxml type string.
      bookingxml = request->get_cdata( ).
      data: streamFactory type ref to
      if_ixml_stream_factory.
      data: iStream type ref to if_ixml_istream.
      streamFactory = g_ixml->create_stream_factory( ).
      iStream =
      streamFactory->create_istream_string(
      bookingxml ).
      data: document type ref to if_ixml_document.
      document = g_ixml->create_document( ).
      data: parser type ref to if_ixml_parser.
      parser = g_ixml->create_parser( stream_factory =
      streamFactory
      istream =
      iStream
      document =
      document ).
      parser->parse( ).
      data: node type ref to if_ixml_node.
      data: strChecked type string.
      node = document->find_from_name( name = 'RESERVED'
      strChecked = node->get_value( ).
      data: reserved type BAPISBODAT-RESERVED.
      data: checked type i.
      move strChecked to checked.
      if ( checked = 1 ).
        reserved = 'X'.
      else.
        reserved = ''.
      endif.
      data: custbook type BAPISBONEW.
      node = document->find_from_name( name = 'AIRLINEID'
      custbook-airlineid = node->get_value( ).
      node = document->find_from_name( name = 'CONNECTID'
      custbook-connectid = node->get_value( ).
      data: fd type BAPISBONEW-FLIGHTDATE.
      data: strFd type string.
      node = document->find_from_name( name =
      'FLIGHTDATE' ).
      strFd = node->get_value( ).
      CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
      EXPORTING
      DATE_EXTERNAL = strFd
    * ACCEPT_INITIAL_DATE =
      IMPORTING
      DATE_INTERNAL = custbook-flightdate
      EXCEPTIONS
      DATE_EXTERNAL_IS_INVALID = 1
      OTHERS = 2
      IF SY-SUBRC <> 0.
    * Do something
      ENDIF.
      node = document->find_from_name( name =
      'CUSTOMERID' ).
      custbook-customerid = node->get_value( ).
      node = document->find_from_name( name = 'CLASS' ).
      custbook-class = node->get_value( ).
      node = document->find_from_name( name = 'AGENCYNUM'
      custbook-agencynum = node->get_value( ).
      node = document->find_from_name( name = 'PASSNAME'
      custbook-passname = node->get_value( ).
      data: pb type BAPISBONEW-PASSBIRTH.
      data: strPb type string.
      node = document->find_from_name( name = 'PASSBIRTH'
      strPb = node->get_value( ).
      CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
      EXPORTING
      DATE_EXTERNAL = strPb
    * ACCEPT_INITIAL_DATE =
      IMPORTING
      DATE_INTERNAL = custbook-passbirth
      EXCEPTIONS
      DATE_EXTERNAL_IS_INVALID = 1
      OTHERS = 2
      IF SY-SUBRC <> 0.
    * Something
      ENDIF.
      data: bn type BAPISBOKEY-BOOKINGID.
      data: return type bapiret2_tab.
      data: errmsg type string.
      CALL FUNCTION 'BAPI_FLBOOKING_CREATEFROMDATA'
      EXPORTING
      RESERVE_ONLY = reserved
      BOOKING_DATA = custbook
    * TEST_RUN = ' '
      IMPORTING
    * AIRLINEID =
      BOOKINGNUMBER = bn
    * TICKET_PRICE =
      TABLES
    * EXTENSION_IN =
      RETURN = return.
      data: wa type bapiret2.
      loop at return into wa.
        if wa-type = 'E'.
          move wa-message to errmsg.
          response->append_cdata( errmsg ).
          response->append_cdata( '<BR>' ).
        endif.
      endloop.
    response->append_cdata( 'Flight booked, booking reference number: ').
      data: strBn type string.
      move bn to strBn.
      response->append_cdata( strBn ).
    endmethod.
    The first page works fine but when I submit my form it fails.  I debugged and the request object doesn't look right.
    Any ideas would be greatly appreciated.
    Regards,
    Dan
    Message was edited by:
            Dan Scheck
    Message was edited by:
            Dan Scheck

    Hi Surija,
    there is an issue with Internet Explorer that causes this problem when you launch the BSP applicaiton using the test menu in SE80. The issue does not occur with Firefox...very strange I know.
    Anyway, to get around this you just copy the BSP application URL and open a browser and paste the URL in...so essentially do not use the "Test" in SE80 to launch your application.
    Hope this fixes your problem!
    Cheers,
    Jeff

  • Cannot open Webi documents from Sharepoint integration portal

    We have installed Sharepoint integration portal integration kit for BO. But when the web part is included into the page to a particular Webi document we are getting the page not found error! The document is not diaplayed.
    Also when we select a report / webi document from the report explorer web part, the opendoument method fails to display any document.
    Are we missing something here. Need some help.
    Thanks
    Edited by: Bhaswar Ghosh on Oct 22, 2008 8:00 PM

    Hi
    Did you receive any error message when you try to open the documents?
    We recommend you start your Internet Explorer in compatibality mode, and follow the advice in the article below:
    http://blogs.technet.com/b/asiasupp/archive/2011/06/13/error-message-quot-your-client-does-not-support-opening-this-list-with-windows-explorer-quot-when-you-try-to-quot-open-with-explorer-quot-on-a-sharepoint-document-library-in-office-365-site.aspx
    In addition here's a thread for your reference:
    http://social.technet.microsoft.com/Forums/en-US/3cbe6b22-e307-485b-a1af-1699cdf5ba86/office-2013-applications-are-not-able-to-open-sharepoint-2007
    Thanks,
    Tylor Wang
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here
     

Maybe you are looking for

  • How to set the title of an urxvt window?

    Hello, I have read the manpage and FAQ on the urxvt website, but my problem persists: When I try to set the title of an urxvt window, for example: $ urxvt -title test then the new window shows for a second the title "test" and then switches  to "user

  • Error in Message Status in SAPBC

    Hi All: We are using SAPBC as our middleware for communication between SAP and external billing application. We are trying to send PO in the form of IDocs (ORDERS) from SAP to the external application through SAPBC. The message type ORDERS in SAPBC h

  • My iPad 2 3g wifi is greyed out. Bluetooth connection and celluar work great. wifi address N/A...

    Wow... I've researched so much about this topic. The story is, the ipad was on top on a car and it fell off while driving down the road.  The driver realized what happened, but it was to late.  Several 18 wheelers were behind him and it was TOAST!  

  • My Threads Takes 90 secs to Complete or Timeout

    Occasionally works in a few seconds, but 80% of the time very, very slow or it times out.  When it works, it is for a few days, then it goes back to the slow/fail mode. Browser IE 11. Am I doing anything wrong? Thanks. Kalman Toth Database & OLAP Arc

  • Lost my Password for my Icloud

    Dear All kindly request help 1- I lost my icloud account password 2- I forget my security questions 3- My back up email in yahoo bas been recycled so I can't open it 4- I have all my data in my icliud in my three iPhone 4s and I phone 5 and now my iP