Troubles with installing an non-CA certificate on ...

hi folks,
i´m encountered with the problem to install an non-ca certificate on our e60.
i can browse to the website as describe in the howto "installing an certificate on s60". but i can´t find an menu where i can import the certificate...
could someone please help me?
thanks a lot,
Andre

move the certificate to the phone, then use file manager on the phone to locate the file, then select it. If all is well then it should ask you if you want to install it.
Hope you are not using SBS2003, because M4E doesn't like self signed certificates.

Similar Messages

I'm having trouble with installing a 8g kit in my late 2009 mac mini. when the parts are installed all i get is a beeping sound, is there any way to get around this?

i'm having trouble with installing a 8g kit in my late 2009 mac mini. when the parts are installed all i get is a beeping sound, is there any way to get around this?

What is the source & link to this 8 GB kit please?
Can you count the beeps or flashes?
1 beep = no RAM installed
2 beeps = incompatible RAM types
3 beeps = no good banks
4 beeps = no good boot images in the boot ROM (and/or bad sys config block)
5 beeps = processor is not usable
In addition to the beeps, on some computers the power LED will flash a corresponding number of times plus one. The LED will repeat the sequence after approximately a 5-second pause. The tones are only played once.
Note: In this case, a flash is considered to be 1/4 second or 250 ms or greater in length.
http://support.apple.com/kb/HT1547

Trouble with installing on mac ppc 10.4.11

I can't install digital editions on my mac ppc running 10.4.11 it says when i try to install "error communicating with adobe id server. please try again later and it says E_AUTH_BAD_DEVICE_KEY. I keep trying, same result. Chatted with adobe, they couldn't help. any ideas. it worked before my puter crashed last time. Any answers????

>hi, using 7.2.1
>
>Re: Trouble with installing on mac ppc 10.4.11
>created by <http://forums.adobe.com/people/Derek+Leng>Derek Leng in
>Adobe Digital Editions -
><http://forums.adobe.com/message/4842875#4842875>View the full
>discussion
>Which ADE version do you use? I think ADE 2.0 supports Mac OS X
>10.6, 10.7, and 10.8 Intel only...
>
>Please note that the Adobe Forums do not accept email attachments.
>If you want to embed a screen image in your message please visit the
>thread in the forum to embed the image at
>http://forums.adobe.com/message/4842875#4842875
>
>Replies to this message go to everyone subscribed to this thread,
>not directly to the person who posted the message. To post a reply,
>either reply to this email or visit the message page:
>[http://forums.adobe.com/message/4842875#4842875]
>
>To unsubscribe from this thread, please visit the message page at
>[http://forums.adobe.com/message/4842875#4842875]. In the Actions
>box on the right, click the Stop Email Notifications link.
>
>Start a new discussion in Adobe Digital Editions by
><mailto:[email protected]m>email
>or at
><http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=3355>Adobe
>Community
>For more information about maintaining your forum email
>notifications please go to
><http://forums.adobe.com/message/2936746#2936746>http://forums.adobe.com/message/2936746#2936746.

Trouble with installing Mini SAP 7.0 on a USB Harddisk

Hi Community,
i have a problem with installing the Mini SAP 7.0 on my USB Harddisk.
The Installing Wizard is abort the Install by 17 %. I have the install wizard, about the night runnig, but nothing. 17 % is end.
Can me Help please.
Regards
Markus
Message was edited by:
        Markus Bechler

No, its no Error Log on Display. The wizard end by 17 %.
On Wizard write, "Preparing packages for Installation"
         Base 7.6.00.32 32 Bit
         17%
there abort, and not reaktion. I musst restart, than is the Wizard going off.
My English is not the best,
Markus

Having trouble with installing updates

Hello,
I am having trouble installing updates. I checked the windowsupdate.log file and I see:
2015-03-13
11:52:43:075       956
680         Agent
* Criteria = "(DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver')"
In reading others' posts, I noticed in their logs contain "DeploymentAction=Install" .. could this potentially be the issue why it will not install the update?   If so, where does this get set at so I can modify it? I looked around
but was not able to find this setting.
Thanks for the help!

Hello,
Here is what I see in the logs. Can you please take a look and see if anything stands out? There are a lot of errors/failures/warnings in the
WindowsUpdate.log. Please look at the last 4 lines of this log listed below -- looks like it is looking for approval or "WARNING: There are no approved updates to install". Where is this coming from? Is this
why the updates do not get installed?    Thanks for any help in reviewing these logs. Thanks.
<looks good>Scanagent.log = No errors/fail/warnings
<![LOG[ScanJob({70E7DB5B-44CF-4BC0-B73F-B89A9AB557BF}): CScanJob::OnScanComplete - Scan completed successfully, ScanType=1]LOG]!><time="23:48:18.177+300" date="03-02-2015" component="ScanAgent"
context="" type="1" thread="2876" file="utils.cpp:477">
WUAHandler.log =
<![LOG[Unable to read existing resultant WUA policy. Error = 0x80070002.]LOG]!><time="05:57:24.588+300" date="02-26-2015" component="WUAHandler" context="" type="2"
thread="4148" file="sourcemanager.cpp:920">
<![LOG[Search Criteria is (DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver')]LOG]!><time="02:26:17.774+240" date="03-11-2015" component="WUAHandler"
context="" type="1" thread="4240" file="cwuahandler.cpp:2916">
<![LOG[Async searching of updates using WUAgent started.]LOG]!><time="02:26:17.774+240" date="03-11-2015" component="WUAHandler" context="" type="1" thread="4240"
file="cwuahandler.cpp:579">
<![LOG[Async searching completed.]LOG]!><time="02:26:24.339+240" date="03-11-2015" component="WUAHandler" context="" type="1" thread="4048" file="cwuahandler.cpp:2068">
<![LOG[Successfully completed scan.]LOG]!><time="02:26:25.651+240" date="03-11-2015" component="WUAHandler" context="" type="1" thread="4240" file="cwuahandler.cpp:3557">
-------------------------------------------------------------------------------------------------------------------------WindowsUpdate.log
= A lot of errors here --
2015-03-11
05:55:59:437       956
1194       AU
WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2015-03-11
05:55:59:437       956
1194       AU
WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-03-11
05:57:22:655       956
144c       EP
FATAL: EP: Failed to obtain element node, error = 0x80245002
2015-03-11
05:57:22:780       956
144c       EP
FATAL: Failed to obtain plugin interfaces using CLSID 7D5F3CBA-03DB-4BE5-B4B3-6DBED19A6833, error = 0x8024000E
2015-03-11
05:57:22:821       956
144c       Agent
WARNING: WU client failed Searching for update with error 0x8024000e
2015-03-11
05:55:59:296       956
1194       Agent
WARNING: SleepStudyTracker: Machine is non-AOAC. Sleep study tracker disabled.
2015-03-11
05:55:59:358       956
1194       Misc
WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2015-03-11
05:57:22:749       956
144c       Agent
WARNING: Failed to obtain the authorization cab URL for service 855e8a7c-ecb4-4ca3-b045-1dfa50104289, hr=0
2015-03-11
05:57:22:811       956
144c       PT
WARNING: PTError: 0x8024000e
2015-03-11
05:57:22:811       956
144c       PT
WARNING: Initialization failed for Protocol Talker Context: 0x8024000e
2015-03-11
05:57:22:811       956
144c       Agent
* WARNING: Exit code = 0x8024000E
2015-03-11
06:21:56:594       968
e8c         Report
WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2015-03-16
04:14:17:850       968
1660       EP
FATAL: Failed to obtain 9482F4B4-E343-43B6-B170-9A65BC822C77 redir SecondaryServiceAuth URL, error = 0x80245002
2015-03-16
04:14:17:850       968
1660       Agent
WARNING: Failed to obtain the authorization cab URL for service 855e8a7c-ecb4-4ca3-b045-1dfa50104289, hr=0
2015-03-11
05:57:23:321       956
17f8       Report
REPORT EVENT: {D462FFC9-CF2C-4EB8-91DC-4EB946A903A1}
2015-03-11 05:57:22:811-0400     1
148 [AGENT_DETECTION_FAILED]
101         {00000000-0000-0000-0000-000000000000}
0
8024000e
AutomaticUpdates
Failure Software Synchronization
Windows Update Client failed to detect with error 0x8024000e.
<as seen earlier in the logs>2015-03-11
02:26:24:027       956
1274       Report
REPORT EVENT: {F5A3CD05-8B66-4806-BAF7-48AD2E8012E8}
2015-03-11 02:26:24:027-0400     1
147 [AGENT_DETECTION_FINISHED]
101         {00000000-0000-0000-0000-000000000000}
0
0
CcmExec
Success
Software Synchronization
Windows Update Client successfully detected 40 updates.
2015-03-18
06:40:25:397       968
5fc          AU
## START ## AU: Install updates
2015-03-18
06:40:25:397       968
5fc          AU
2015-03-18
06:40:25:397       968
5fc          AU
# Initiating scheduled install
2015-03-18
06:40:25:428       968
5fc          AU
WARNING: There are no approved updates to install

Trouble with install disks - is it OK to make a copy of them?

Finally, I am trying to make a copy of the install disks that came with my MBP. This was recommended in several threads for preserving the original and having backups just in case.
I used Disk Utility to make a disk image - choosing DVD/CD master, no encryption - as I was instructed on another thread. I made the disk images fine of the 2 disks - they are now saved as disk images in the .cdr format. While I was at it, I made a disk image of the TechTool Deluxe CD that came with my AppleCare.
When I inserted a CD (and then I tried a DVD) into the slot to Burn the disk image of the first (and then the second) install disk, I got the message that there is not enough room on the disk I am trying to use (for either disk). I had no trouble burning a disk of the TechTool Deluxe - I did that on a CD.
When I go to Get Info for the disk image for the 2 install disks, it looks like each is no larger than 5 plus GB, which seems strange.
What am I doing wrong?
Mrs H

When you make images of the discs, it is compressed. So when you get info of the image, that is smaller than the actual disc size. You said disc two was 3.97gb but really uncompressed it is likely over 6GB. For both install discs one and two, you need dual-layer DVDs to burn.
Thanks for your help, mdpeterman.
I wondered about the compressed issue - but since I chose CD/DVD master, (from Disk Utility Help: "If you want to use the disk image with a third-party application, choose CD/DVD master. The disk image contains a copy of all sectors of the disk, whether they're used or not, and copies them to other CDs or DVDs bit for bit") with no encryption I assumed that the size of the disk image was identical to the original.
What you say tells me I'm wrong - that even with DVD master bit for bit, the image is compressed. Right?
I'll get back to you when I have solved this...
Mrs H
Mrs H

Trouble with installing 10.5 from an external firewire drive

I have a family pack of 10.5 and installed it just fine on my macbook. But, I'm having trouble getting my imac DVD player to read the DVD. It just spins and spits it out, and spins and spits it out. The imac is not covered under applecare so spending money to get the DVD drive fixed (which I barely use) is not something I want to do right now.
Anyway, I followed instructions on a this website to install 10.5 from an external firewire drive. (http://iuseapple.com/blog/apple-how-to/advanced-os-x/2007/10/29/how-to-install-l eopard-from-external-firewire-hard-drive/)
But I get stuck and am not able to actually get my imac to boot from the installer. Basically, I am able to use disk utility to create a copy of the disk image on my macbook. That resulting file ends in ".cdr" and it mounts when I double click it.
And I partitioned my firewire hard drive without problems.
I think I'm messing up when it comes to doing the restore. If I try to drag the .dmg mounted file in to the "source" it doesn't work (is greyed out). If I try to drag the mounted .dmg there than it works, but I get an error when I click "restore" (something about scans and images not being found). I tried physically copying the .dmg file onto the partition, but then when I plugged the HD into my imac, I wasn't able to get the imac to boot from the installer.
What am I doing wrong? If someone could walk me through these last steps I'd appreciate it!

Okay I finally got around to creating the bootable disk image of 10.5 using Carbon Copy Cloner. Still my iMac is not booting from the firewire drive!
Here's a recap of everything I've tried. I'm at a complete loss now!
- I partitioned the HD into 2 partitions-- a 10gig one for the 10.5 install, the then the rest for Time Machine. I make the partition in Disk Utility on my MacBook.
- I've partitioned the drive a few times-- always partitioning it in APM format (b/c it needs to boot my non-intel iMac).
- I've created the disk image using "restore" in disk utility. I've again tried this a few times.
- I am able to boot my MacBook from the disk image I create! So I know the FW drive is able to be used to boot from!
- Here's what I've tried in terms of getting the iMac to boot from the FW drive. It always just boots to my internal drive instead. Sometimes I briefly see a folder and question mark. I've tried all 3 FW ports. I've selected the install partition at start up in preferences. I've also held down the option key at start up (only my internal drive shows) and I've held down command-option-shift-delete and again I get the question mark and it boots to my internal drive.
- And I installed Carbon Copy Cloner and made the disk image that way on my macbook. Still, I tried everything and the iMac is not able to boot from the firewire drive!
Since my DVD drive is broken, this is the only way for me to install 10.5! Help!

[SOLVED] Trouble with Install that I've never seen before (Gnucash)

Hello all! I am rather new to Arch. I came over from Windows (disgruntled up to Win 7). When I first came over to Linux I did so via Ubuntu (12.04 and 13.10) and Mint (16). Seeing that Ubuntu would love to eventually sell us all out I decided to give Arch a try and LOVED IT! The install went smoothly and almost every program that I have needed has installed flawlessly..That is with the exception of Gnucash. I do a lot of freelance bookkeeping work and Gnucash is most definitely the best program I have found out there (even when I was using Windows). I have tried to install from BOTH the official repository and the AUR with no luck. I am using a 64 bit install of Arch on a Dell Inspiron 1440. All of my packages and repositories have been updated through pacman -Syu and -Syy. Below is the results message that I receive when trying to install from EITHER repository (AUR version is what I have posted). It shows that there appear to be two corrupt packages. If any of you can guide me in the right direction as to how to possibly rectify my trouble I would be most appreciative. (Also: if I am posting this in the wrong area please let me know where the better place would be.)
[rick@rick_inspiron1440 builds]$ tar -xf gnucash-latest.tar.gz
[rick@rick_inspiron1440 builds]$ cd gnucash-latest
[rick@rick_inspiron1440 gnucash-latest]$ makepkg -sci
==> Making package: gnucash-latest 2.6.1-1 (Sun Feb 16 14:27:20 EST 2014)
==> Checking runtime dependencies...
==> Installing missing dependencies...
[sudo] password for rick:
resolving dependencies...
looking for inter-conflicts...
Packages (25): gconf-3.2.6-3 gnome-mime-data-2.18.0-6 gnome-vfs-2.24.4-8
guile1.8-1.8.8-3 gwenhywfar-4.3.3-4 ktoblzcheck-1.43-1
libart-lgpl-2.3.21-3 libbonobo-2.32.1-4 libbonoboui-2.24.5-2
libdbi-0.9.0-2 libglade-2.6.4-5 libgnome-2.32.1-4
libgnome-data-2.32.1-4 libgnomecanvas-2.30.3-2
libidl2-0.8.14-3 libofx-0.9.9-1 libxml++-2.36.0-1
opensp-1.5.2-4 orbit2-2.14.19-2 aqbanking-5.0.25-2
goffice0.8-0.8.17-2 gtkhtml-3.32.2-3 libdbi-drivers-0.9.0-2
libgnomeui-2.24.5-1 slib-3b3-3
Total Download Size: 1.28 MiB
Total Installed Size: 88.49 MiB
:: Proceed with installation? [Y/n] y
:: Retrieving packages ...
gtkhtml-3.32.2-3-x86_64 628.7 KiB 724K/s 00:01 [######################] 100%
libdbi-0.9.0-2-x86_64 642.2 KiB 415K/s 00:02 [######################] 100%
libdbi-drivers-0.9.... 35.4 KiB 668K/s 00:00 [######################] 100%
(25/25) checking keys in keyring [######################] 100%
(25/25) checking package integrity [######################] 100%
error: libdbi: signature from "Thorsten Töpper <[email protected]>" is unknown trust
:: File /var/cache/pacman/pkg/libdbi-0.9.0-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: libdbi-drivers: signature from "Thorsten Töpper <[email protected]>" is unknown trust
:: File /var/cache/pacman/pkg/libdbi-drivers-0.9.0-2-x86_64.pkg.tar.xz is corrupted (invalid or corrupted package (PGP signature)).
Do you want to delete it? [Y/n]
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
==> ERROR: 'pacman' failed to install missing dependencies.
Last edited by rightwingrb (2014-02-19 00:28:41)

rightwingrb wrote:Also...I have no idea what "code" tags are but hopefully the above is acceptable ;-)
When posting configs, code or command output, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.
Please remember to mark the thread as solved https://bbs.archlinux.org/viewtopic.php?id=130309
Last edited by karol (2014-02-18 22:23:24)

Trouble with installing VS Express 2013 For Web, Update 4

Hello,
I have Windows 7 Home Premium w/ SP1. I downloaded/ran the installer, not ISO.
Message: Microsoft C++ 2013 x86 Mimimum Runtime - 12.0.21005
The WIS(Windows Installer Service) could not be accessed. This can occur if the WI(Windows Installer) is not correctly installed.
http://www.microsoft.com/en-us/download/details.aspx?id=44912 <-- download link
[09D8:0640][2015-03-17T13:56:11]i301: Applying execute package: vcRuntimeMinimum_x86, action: Install, path: C:\ProgramData\Package Cache\{13A4EE12-23EA-3371-91EE-EFB36DDFFF3E}v12.0.21005\packages\vcRuntimeMinimum_x86\vc_runtimeMinimum_x86.msi, arguments: ' MSIFASTINSTALL="7" NOVSUI="1"'
[069C:01A0][2015-03-17T13:56:11]i000: MUX: Package:kb2829760, PayloadId:kb2829760 Url: http://go.microsoft.com/fwlink/?LinkId=428517&clcid=0x409, Attempting count: 1
[069C:01A0][2015-03-17T13:56:11]i000: MUX: Existing last unconfirmed source: Web
[069C:01A0][2015-03-17T13:56:11]i338: Acquiring package: kb2829760, payload: kb2829760, download from: http://go.microsoft.com/fwlink/?LinkId=428517&clcid=0x409
[09D8:0640][2015-03-17T13:56:11]e000: Error 0x80070641: Failed to install MSI package.
[09D8:0640][2015-03-17T13:56:11]e000: Error 0x80070641: Failed to execute MSI package.
[069C:0B10][2015-03-17T13:56:11]e000: Error 0x80070641: Failed to configure per-machine MSI package.
[069C:0B10][2015-03-17T13:56:11]i000: MUX: Installation size in bytes for package: vcRuntimeMinimum_x86 MaxAppDrive: 0 MaxSysDrive: 4096 AppDrive: 0 SysDrive: 4096
[069C:0B10][2015-03-17T13:56:11]i000: MUX: Return Code:0x80070641 Msi Messages:0 Result Detail:0 Restart:None
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Unregistering and registering msiexec.
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Executing Process: Exe:C:\Windows\system32\msiexec.exe Arguments:/unreg
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Process exit code: 0
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Executing Process: Exe:C:\Windows\system32\msiexec.exe Arguments:/regserver
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Process exit code: 0
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Retrying the package again
[069C:0B10][2015-03-17T13:56:12]w348: Application requested retry of package: vcRuntimeMinimum_x86, encountered error: 0x80070641. Retrying...
[069C:0B10][2015-03-17T13:56:12]i000: MUX: ExecutePackageBegin PackageId: vcRuntimeMinimum_x86
[09D8:0640][2015-03-17T13:56:12]i301: Applying execute package: vcRuntimeMinimum_x86, action: Install, path: C:\ProgramData\Package Cache\{13A4EE12-23EA-3371-91EE-EFB36DDFFF3E}v12.0.21005\packages\vcRuntimeMinimum_x86\vc_runtimeMinimum_x86.msi, arguments: ' MSIFASTINSTALL="7" NOVSUI="1"'
[09D8:0640][2015-03-17T13:56:12]e000: Error 0x80070641: Failed to install MSI package.
[09D8:0640][2015-03-17T13:56:12]e000: Error 0x80070641: Failed to execute MSI package.
[069C:0B10][2015-03-17T13:56:12]e000: Error 0x80070641: Failed to configure per-machine MSI package.
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Installation size in bytes for package: vcRuntimeMinimum_x86 MaxAppDrive: 0 MaxSysDrive: 0 AppDrive: 0 SysDrive: 0
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Return Code:0x80070641 Msi Messages:0 Result Detail:0 Restart:None
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Set Result: Return Code=-2147023295 (0x80070641), Error Message=, Result Detail=, Vital=True, Package Action=Install, Package Id=vcRuntimeMinimum_x86
[069C:0B10][2015-03-17T13:56:12]i319: Applied execute package: vcRuntimeMinimum_x86, result: 0x80070641, restart: None
[069C:0B10][2015-03-17T13:56:12]e000: Error 0x80070641: Failed to execute MSI package.
[069C:0B10][2015-03-17T13:56:12]i000: MUX: ExecutePackageBegin PackageId: vcRuntimeMinimum_x86
[09D8:0640][2015-03-17T13:56:12]i318: Skipped rollback of package: vcRuntimeMinimum_x86, action: Uninstall, already: Absent
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Installation size in bytes for package: vcRuntimeMinimum_x86 MaxAppDrive: 0 MaxSysDrive: 0 AppDrive: 0 SysDrive: 0
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Return Code:0x0 Msi Messages:0 Result Detail:0 Restart:None
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Reset execution Result
[069C:0B10][2015-03-17T13:56:12]i000: MUX: Reset Result
[069C:0B10][2015-03-17T13:56:12]i319: Applied rollback package: vcRuntimeMinimum_x86, result: 0x0, restart: None
[09D8:0640][2015-03-17T13:56:12]i351: Removing cached package: vcRuntimeMinimum_x86, from path: C:\ProgramData\Package Cache\{13A4EE12-23EA-3371-91EE-EFB36DDFFF3E}v12.0.21005\
[069C:01A0][2015-03-17T13:56:13]e000: Error 0x80070642: UX aborted on download progress.
[069C:01A0][2015-03-17T13:56:13]e000: Error 0x80070642: UX aborted on cache progress.
[069C:01A0][2015-03-17T13:56:13]e000: Error 0x80070642: Failed while reading from internet and writing to: C:\Users\mina\AppData\Local\Temp\{c62e2ef6-2071-4ccc-97ee-ec0e70186f3f}\kb2829760
[069C:01A0][2015-03-17T13:56:13]e000: Error 0x80070642: Failed to download URL: http://go.microsoft.com/fwlink/?LinkId=428517&clcid=0x409
[069C:01A0][2015-03-17T13:56:13]e000: Error 0x80070642: Failed attempt to download URL: 'http://go.microsoft.com/fwlink/?LinkId=428517&clcid=0x409' to: 'C:\Users\mina\AppData\Local\Temp\{c62e2ef6-2071-4ccc-97ee-ec0e70186f3f}\kb2829760'
[069C:01A0][2015-03-17T13:56:13]i000: MUX: Set Result: Return Code=-2147023294 (0x80070642), Error Message=, Result Detail=, Vital=True, Package Action=Download_WinInet, Package Id=kb2829760
[069C:01A0][2015-03-17T13:56:13]e000: Error 0x80070642: Failed to acquire payload from: 'http://go.microsoft.com/fwlink/?LinkId=428517&clcid=0x409' to working path: 'C:\Users\mina\AppData\Local\Temp\{c62e2ef6-2071-4ccc-97ee-ec0e70186f3f}\kb2829760'
[069C:01A0][2015-03-17T13:56:13]e313: Failed to acquire payload: kb2829760 to working path: C:\Users\mina\AppData\Local\Temp\{c62e2ef6-2071-4ccc-97ee-ec0e70186f3f}\kb2829760, error: 0x80070642.
[09D8:0640][2015-03-17T13:56:13]i372: Session end, registration key: SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{c62e2ef6-2071-4ccc-97ee-ec0e70186f3f}, resume: ARP, restart: None, disable resume: No
[09D8:0640][2015-03-17T13:56:13]i371: Updating session, registration key: SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{c62e2ef6-2071-4ccc-97ee-ec0e70186f3f}, resume: ARP, restart initiated: No, disable resume: No
[069C:0B10][2015-03-17T13:56:13]i000: MUX: Apply Complete: Disk Space Used in bytes for Installation: MaxAppDrive: 0 MaxSysDrive: 3186688 AppDrive: 0 SysDrive: 2588672
[069C:0B10][2015-03-17T13:56:13]i000: MUX: Free Disk Space after install: SystemDrive C:\ 654117507072 bytes AppDrive C:\ 654117507072 bytes
[069C:0B10][2015-03-17T13:56:13]i000: MUX: Go to Finished page.
[069C:0B10][2015-03-17T13:56:13]i399: Apply complete, result: 0x80070641, restart: None, ba requested restart: No
Thanks to anyone who tries to help with this issue.

Hello Suomin,
Please notice the following message:
Error 0x80070642: Failed while reading from internet and writing to: C:\Users\mina\AppData\Local\Temp\{c62e2ef6-2071-4ccc-97ee-ec0e70186f3f}\kb2829760
[069C:01A0][2015-03-17T13:56:13]e000: Error 0x80070642: Failed to download URL: http://go.microsoft.com/fwlink/?LinkId=428517&clcid=0x409
[069C:01A0][2015-03-17T13:56:13]e000: Error 0x80070642: Failed attempt to download URL: 'http://go.microsoft.com/fwlink/?LinkId=428517&clcid=0x409' to: 'C:\Users\mina\AppData\Local\Temp\{c62e2ef6-2071-4ccc-97ee-ec0e70186f3f}\kb2829760'
Although I don't know what is WIS in your post, I think you need to manually download and install this package Message: Microsoft C++ 2013 x86 Mimimum Runtime - 12.0.21005
Or please switch to use ISO and verify your ISO checksum:
https://www.visualstudio.com/en-us/downloads/visual-studio-2013-iso-sha1-vs
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Troubles with installing quicktime : macbook being h e ll !

Hello everybody,
first, i would like to apologize for my bad english, i'm french and i don't speak very well english.
Il will try to explain my trouble :
I'm the owner of a macbook ( MAC OS 10.6 ) for more than four years.
I try to upgrade Quicktime Player, because when i tried to watch movies with it, i got a error message : " You have to upgrade Quick Time, etc " and i folow the link :http://www.apple.com/quicktime/download/ and i downloaded it and installed on my computer. It asked me to reboot. I did it. And H e ll was coming on my poor Macbook :
- about five minutes to boot,
- Icons on the desk don't appear
- impossible to launch any process like i-tunes, firefox, teamspeack...
- options of the high menu are disables ( finder, time, wi-fi, bluetooth)
- i can't shut off the macbook normally. I have to force it.
I take a (bad) picture :
I tried to press APPLE-S at the start and used the fsck -fy function, i get :
FILE SYSTEM WAS MODIFIED
After three others trys, i get :
" The volume Macintosh HD appears to be OK. "
I type : " reboot " but it's the same like usual = doesn't work.
I tried to press APPLE shift at the start, nothing changes.
My DVD-reader is broken, i can't ' format ' or reaload Mac OS 10.6, so i'm asking for a solution.
I thank you for any help you could bring to me, and i apologize for my bad english,
cordialy,
Baacha.

Hi,
i can go to the Disk Utility with hard freeze ( and some icons don't appear ) but when i double click on Disk Utility, nothing happens.

Trouble with installing/uninstalling illustrator and cloud manager

I first was having trouble installing adobe illustrator CC trial. It kept having errors. I did what they suggested and now I cannot even install the creative manager. Now it will not even allow me to uninstall adobe illustrator (even though it never fully downloaded to begin with, it still shows up on control panel) I ran the adobe cloud cleaner multiple times, trying different settings and some of the times it says it had an error. Adobe illustrator doesn't even appear to exist on my computer other than being listed in control panel, yet I still can't get rid of it. I've restarted my computer. I've even tried downloading the trial from a different site and it would not work. Can anyone please help me?
Thank you so much!

There's a dedicated forum for installing. They might be able to help you better there:
http://forums.adobe.com/community/download_install_setup

Trouble With installing Snow Leopard on my 4 year old Macbook

I'm trying to install Snow Leopard to my 4 year old Macbook stuck on 10.5.8, but it keeps saying "The application 'Install Mac OS X' cannot be used from this volume." I've tried almost everything to solve this, but I can't find anything at really helps my situation. I've looked on some of these discussions, and they haven't really helped much. My Macbook has a: 2.4 GHz Intel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAM, and is stuck on OS X 10.5.8. Please give me your input and help

Are you using a Retail version of Snow Leopard that looks like this?
Or gray discs that look like this?
The gray discs are machine specific and will only work with the MacBooks that they were shipped with.

Having trouble with Installing itunes on web site

Can someone help with this issue. I have tried installing itunes thru
www.apple.com/ipod/start
I download the program via the 'run' option and it begins to load in the temp file location. It starts to transfer until 77% (always) and then doesn't continue although the function is running. After 20 minutes the message pops up that the process time out. There is no error message. Does anyone know what would cause this?
Thanks for any help

I had the same problem, and whether you run or save when downloading it would stop at 76%. After 2 days of defragging, updating virus software, checking my registry and everything else I can think of I finally called support. Go to www.filehippo.com and download itunes from there.

(Solved) Trouble with installing on Crucial C300 Real SSD 64GB

Hello everyone. I've been trying to figure this out for the last three nights. I cannot get arch installed if I am using my ssd. The ssd is Crucial c300 64 GB firmware is 0006. It does not matter what I do if my ssd is connected I get to booting os in bios followed by a reboot with no error messages. I have tried many different things like allowing arch to manually partition the ssd, using ssd as home instead of root to no avail. Only thing I have not tried is adding a 1 mb partition to the beginning of ssd marked as ef02 as per the Arch SSD wiki. If anyone with this same ssd and firmware can chime to let me know if they had the same issue I would appreciate it. I do not have this problem with other distros. Ubuntu, Linux Mint, and LMDE have all installed fine on the ssd. Sorry if this is the wrong section for this.
Edit. Looks like I found out the problem. It was having quit boot enabled in the bios. I suppose I need to look into initreadahead if I want arch and my computer to play nice with that setting.
Last edited by nemesis2all (2011-02-21 13:40:28)

Check whether grub-install belongs to grub package or grub2 package. Try to install these updated grub2 packages from here
http://dl.dropbox.com/u/9710721/skodabe … pkg.tar.xz - for x86_64
http://dl.dropbox.com/u/9710721/skodabe … pkg.tar.xz - for i686
http://dl.dropbox.com/u/9710721/skodabe … pkg.tar.xz - any arch
and then follow the post_install instructions from grub2-bios package.
You might have to 'bind' mount /dev into your <chroot>/dev though or install the above packages and install grub2 from outside the chroot.
Last edited by skodabenz (2010-12-13 13:32:51)

Trouble with Installing Empire: Total War; downloaded from Best Buy Pc app

Hello,
I have had troubles downloading and installing Empire: Total War. At first, I coudn't download it but I now have figured it out. I checked today after work and it successfully downloaded. The trouble now is that I have the files but can't seem to install them. I pressed the "install manually" button within the Pc app but nothing happened. Help would be appreciated!

Hi mhviking25,
You should be able to locate the game data files here:
C:\Users\ [User Name] \AppData\Local\Best Buy pc app\DigitalShelf\ [Your Game folder]
In that folder there is likely an executable install file (.exe) that you could try. If it's not there or that install method doesn't work, there may have been a problem during the download process and you'll want to try a re-download. I know that not ideal as you ran into issues trying to download it the first time but hopefully it doesn't come to that.
Let me know if you have any questions.

Troubles with installing an non-CA certificate on ...

Similar Messages

Maybe you are looking for