Troubles with LabVIEW and the SR830 Lock-in Amp.

i'm quite new to LabVIEW and am trying to use the sr830 instrument drivers
to control the Lock-in from a computer, but the instrument drivers don't
seem to want to send or recieve any data. if anyone who is more proficient
in VI programming couild help me out with this, i would greatly appreciate
a response. thanks.

Lackey wrote:
> i'm quite new to LabVIEW and am trying to use the sr830 instrument drivers
> to control the Lock-in from a computer, but the instrument drivers don't
> seem to want to send or recieve any data. if anyone who is more proficient
> in VI programming couild help me out with this, i would greatly appreciate
> a response. thanks.
Are you using the instrument driver downloaded from Nat Inst ??
If you are this thing looks terrible, but should work.
You could try building a simple VI to see if all the communication is working
properly.
Check to make sure you have the correct GPIB address and that all the cables
cards etc are properly connected and working.
Kevin KEnt
Attachments:
Kevin.Kent.vcf ‏1 KB

Similar Messages

Controlling a chemical process with LabVIEW and the SC 2075 board

Hi,
I am a degree student and one of my projects is to control a chemical process using LabVIEW and the SC2075 board. The process variables i must control are temperature, pH and also several motor. Is this viable using the SC 2075 board and if so does anyone know where i can attain information on using the board. Also if anyone has suitable sample vi's that may be of use to me it would be very much appreciated. My email is [email protected]
Kind Regards,
Derek

Hi Derek,
Bellow is a link the the user guide for the 2075.
http://www.ni.com/pdf/manuals/371217a.pdf
You should be able to aquire data from you sensors but you might need some signal conditioning depening on the voltage levels they return.
For sample vi's try going to Help>>Find Examples... within LabVIEW or goto the following link to search our developer exachange.
http://www.ni.com/devzone/dev_exchange/ex_search.htm
For more information about Signal conditioning and Data Aquisition try:
http://zone.ni.com/devzone/devzone.nsf/webcategories/4d58b1b80ec41ef70625683f006e1d6d
I hope this helps
Regards
Jon Bowers
Applications Engineer
NIUK

Troubles with messengers and the battery

hi! i'm from russia. have been using the new ipad for 2months or so. could anyone recommend a good messenger with a working mail.ru agent account? the mail.ru agent itself doesn'work well - it always goes offline! (though it's from appstore!!!) im+ doesn't meet my demands eihter... i'd appreciate it if anyone could help... at least i hope they read these trouble reviews in apple and will do sth!!! it's become almost impossible to communicate by changing messages online! and the other question - after upgrading to ios6 the battery doesn't live for long... what should i do with that??? thanx in advance, maria

Apple are working on it, many people have been having this probleme mainly on 4 an 4s. All you can do is wait for an upgrade, check this link for better battery lifehttp://www.apple.com/batteries/iphone.html or pick up a mophie juice pack.

Having trouble with yahoo and the messenger

with yahoo i can't open up my mail . and with the messenger it doesn't show my contacts at all . And it won't let me download the newer messenger

Try Yahoo help: <br />
http://help.yahoo.com/l/us/yahoo/helpcentral/

HT201210 I can not get the iphone to sync with itunes and the iphone locked up my ipad too. I have downloaded the recent itunes 10.6.3 and restarted my computer. What do I do?

My iphone was not synced when I received it. I plugged it in to charge it, and it locked up my ipad. My itunes was not updated on my desktop, so I just updated it to itunes 10.6.3. I have restarted my computer, and nothing is changing. I can not get the iphone to move from the screen, its stuck on the itunes icon. Help please.

I am downloading the 11.0.2 as we speak. I will update in a bit.

How can i work simultaniously with labVIEW and Excel ?

Hello . I study engineering and need some help with labVIEW, and the connection to microsoft excel.

Hi
NI offers an "Report generation toolkit". You get some VI's with this toolkit and so you can directly create your reports from LV.
Another possibility is the communication through ActiveX. There is a nice link with application notes and LV examples for that:
http://zone.ni.com/devzone/devzone.nsf/webcategories/C3E56C69D399361E86256AB7006A9149?opendocument&node=DZ53003_US
Regards,
Luca

TS3694 i factory unlock my iphone 3gs and was on ios 6.1.2 and updatednit to 6.1.3 with itunes and the phone got lock again at activation screen. i try downgrading to 4.1 with baseband 5.13.04 and want to upgrade back to 6.1.2. pls help me

i factory unlock my iphone 3gs and was on ios 6.1.2 and updatednit to 6.1.3 with itunes and the phone got lock again at activation screen. i try downgrading to 4.1 with baseband 5.13.04 and want to upgrade back to 6.1.2. pls help me

Sorry, downgrading the iOS is not supported by Apple, thus there is no official way to do so. Your phone was re-locked to the carrier it was originally locked to because you hacked it to unlock it. Apple's servers detected such & re-locked your phone. You need to contact the carrier your phone is locked to if you want to get it officially unlocked.

The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?

The updated iPhoto program is cumbersome. I am trying to create a Christmas card and can't figure out how to get the fold of the card on the left and not on the top of the card. I had no trouble with this for the past two years. Can someone help?

Click on the Layout button lower right and choose a Vertical lyout from the dropdown

I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. Can I go back to the older version? I had no trouble with that and I do not like this new version at all.

I downloaded Firefox 4.0 and it says to re-install the toolbar but I have not been successful in doing so. I went to the forums and tried all the suggested fixes but none worked. Can I go back to the older version? I had no trouble with that and I do not like this new version at all. I tried a system restore twice and it did not fix the problem.

I would imagine it's the MyWay Searchbar which is classified by most anti-malware scanners as adware, or even worse as spyware. I say that because I see "SmileyCentral" in your list of plugins and that's an add-on for that particular toolbar. You can disable that via Tools | Add-ons | Plugins.
There are a number of toolbars which won't work with Firefox 4 anymore due to the enhanced protection mechanisms in the browser.
Mozilla recommends that you only install add-ons from its own security site @ https://addons.mozilla.org/en-US/firefox/?browse=featured Generally speaking, those have all been tested and approved. The exceptions are those currently under review which are marked with a yellow banner to warn users that they haven't passed Mozilla's labs yet.

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

I am having trouble with safari and most apps shutting down when I'm in the middle of stuff what do I need to do to resolve this?

I am havering trouble with safari and apps shutting down on me all the time what can I do to resolve this problem. Thanks :-)

Make sure you have enough free space on your iPad. With iOS 7 it is recommended that you have 15-20% of the storage space on the device free. For a 16 GB device that is 2.4-3.2 GB free. For a 32 GB device that is 4.8-6.4 GB free. For a 64 GB device that is 9.6-12.8 GB free.
Also try a reset. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-

Hi, everyone.
I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-
after running get-OWAVirtualDirectory or test-OWAConnectivity i'm getting a message that says "OWA it's Orphan, No Metadata information can be found."
I only have the OWA users impacted.- anywhere users, and ActiveSync are working well.-
Thanks,
Fabian Alberto Campo
MCT-MCSA 2012-MCITP365-MCTS
Fabián A. Campo H. Consultor tecnico @ IXO Ltda. MCT MCP MCTS MCSA HP-APS Cra. 67 No. 167 – 61 of 303 Bogotá, Colombia

Hi Fabian,
Is there any error code when user access their mailbox on OWA. Please confirm if there is no results returned in EMS when you run Get-OWAVirtualDirectory cmdlet. Also check whether there is any Event Logs related to OWA in Exchange.
In IIS manager, make sure the OWA virtual directory is listed in the Default Web Site. In EMC, we can navigate to Server Configuration > Client Access, select server and turn to Outlook Web App tab. Then we can click Reset Virtual Directory in the right
Actions pane to reset OWA virtual directory.
Additionally, please restart IIS service by running iisreset /noforce from a Command Prompt window.
Regards,
Winnie Liang
TechNet Community Support

Hi I am having trouble with iMessage on the mac book pro, it doesnt sync with the ipad and iPhone, both the ipad and iPhone do but not on the mac book pro , has anyone any suggestions, thanks in advance

Hi I am having trouble with iMessage on the mac book pro, it doesnt sync with the ipad and iPhone, both the ipad and iPhone do but not on the mac book pro , has anyone any suggestions, thanks in advance

First, make sure that all your devices are using the same Apple ID in iMessages including your Mac. Second, your messages that you've already started on your devices will not show up on your Mac - only ones that you start from now on will show up. Third, if you're still not syncing accross all devices, make sure you read the directions on the first page of this thread. It should work after performing those steps. Good luck!

Is anyone having trouble with internet on the new macbook air and an old modem?

Is anyone having trouble with internet on the new macbook air using an old modem?
I live in NYC and have an old modem/router and keep getting kicked off the internet. I have time warner as my internet provider.

Hello there adell723,
I suggest taking a look at this article we have named Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6 found here http://support.apple.com/kb/HT4628?viewlocale=en_US.
Symptom: The network connection drops unexpectedly
Your Mac may not not stay connected to your Wi-Fi network reliably.
Your Mac may stop accessing the Internet during use.
Solution
Use these steps if your computer disconnects from its Wi-Fi network unexpectedly.
Check your range to the Wi-Fi router and reduce the effect of interference.If your computer is too far from your Wi-Fi router or your environment has too much Wi-Fi interference, then your computer may not detect the Wi-Fi network properly. The easiest way to check for range limits with your Wi-Fi network is to move your computer or your Wi-Fi router closer together and make sure that there are no obstructions (such as walls, cabinets, and so forth) between the router and your computer.See Potential sources of wireless interference for more information about interference and solutions.
Try connecting to a different Wi-Fi network. If your computer works fine when connected to a different Wi-Fi network, then the issue may be related to your network router or ISP. In that case, contact the manufacturer of your router or your ISP.
If you have Mac OS X 10.8.4 Mountain Lion installed then I would recommend using Wireless Diagnostics tool which is on your computer already.
Here is the article for it and how to use it to assist with wifi connectivity issues.
About Wireless Diagnostics
http://support.apple.com/kb/HT5606
Cheers,
Sterling

How to switch central frequency fastly with labview and USRP?

Hello everybody,
         Recently I was making a frequency hopping receiver with labview and USRP N210 and SBX. The transmitter works on the 2.4G band, and it changes from one central frequency to another every 65536us. As I think, if I start receiving at the correct time, and change the central frequency of the USRP every 65536us, I should be able to receive the data.
    But I find that, when usrp switch form one central frequency to a different one, it spends nearly 48ms and when it switch from one frequency to the same one, it only spends 3ms(I test the performance by modifying the niUSRP EX Rx Continuous Async Reconfig on the Fly.vi example). So if I want to follow the hopping sequency, I may can only receive 17ms data because I have to save time for switching central frequency.
     My problem is that: why usrp changes central frequency so slow, how can I make the process faster? If I want to follow the hopping sequency, can anybody give me some good advice? Thanks

There is an attribute "LO Frequency" that you can use to lock down the frequency of the local oscillator. Then, when you set the "Carrier Frequency" attribute, the difference between the carrier frequency value and the LO frequency value will be realized by frequency shift in the DSP in the FPGA. Changing this "digital" frequency shift value is much faster, since you don't have to re-tune the local oscillator.
Let's say you're sweeping from 2.44 GHz to 2.46 GHz. Set the "LO Frequency" to 2.45 GHz then Commit. Then, in your loop, program the "Carrier Frequency" attribute from 2.44 GHz to 2.46 GHz. In the loop, it will only program the digital frequency shift, which will happen much faster.
Another tip is to use the property node to program only the attributes you want to change, rather than the niUSRP Configure Signal.vi (which sets many at once).
For more details, see the "Configuration:Advanced:LO Frequency Property" in the NI-USRP Help, and look at this example:
<LabVIEW dir>\examples\instr\niUSRP\niUSRP EX Fine-Tune LO Frequency.vi

Troubles with LabVIEW and the SR830 Lock-in Amp.

Similar Messages

Maybe you are looking for