Troubles with Multiple Audio Streams.[ca0106]

Hey everyone.
I have a few issues on my hands that i just cannot seem to get a strait foward answer.
First off, i have a Sound Blaster Live! 24bit pci sound card. Sound plays perfect as well as surround sound.
My issue is that i cannot get mulitiple things to play sound at once. All of the correct modules are loaded just fine and working well. I do believe that when i was using gentoo and could play multiple audio streams, i had alsa built into my kernel.... in arch i dont believe i do.
Im trying not to build my kernel all over again in arch because i think its something in arch i may be doing wrong...
Thanks
Anthony
Last edited by anthonyclark (2008-04-02 13:30:58)

Thanks for the reply.
I know for a fact im using ALSA. Since i made that post, ive been doing as much research as possible. I found on ubuntuforums, some dude posted some configs for his ca0106 sound card. I tried them and they take me to the same fork.
Surround Sound .... or .... Multiple audio streams.
So the big questions is, is it possible to have both? And would compiling a new kernel with ALSA and support for my card make a difference?
Thanks!
anthony
Last edited by anthonyclark (2008-04-02 15:25:48)

Similar Messages

Can Premiere Pro CC handle AVI files with multiple audio streams?

I have an AVI file with two audio streams and I am wondering if there's any way to access the second stream in PP? So far I can only get the first stream to play. I know I can extract the second stream in for instance VirtualDub, but it would be nice to not have to do that in the interest of an effective workflow.

Hello again Jim! Thank you for your reply, you seem to be working hard here on the forums! The info I have found from 2011 suggested that it wasn't possible then, but I was hoping maybe they added this feature.

MPEG with multiple audio streams

I have a dvd that has one video on it with 4 different audio options. The goal is to recreate the dvd with different menu's etc. I ripped the dvd with MPEG Streamclip. I played the ripped mpeg and it definitely contains all four audio streams. I then imported the mpeg into encore cs4 and it only shows the default audio selection, the other three are gone. I tried importing it into premier and the same thing happened. This seems like it should be pretty easy but maybe not.
Thanks for the help,
Kevin

Kevin,
First, welcome to the forum.
Next, I am shooting blind here, as I have never gone this direction. If none of this works, sorry. I only go the other way, creating what you hope to recreate.
Now, what happens if you rip the Audio in a Multi-track Audio editing program, like Adobe Audition? I would hope that it will rip each Audio stream as a stereo WAV (or as discrete WAV's if you have AC3 DD 5.1 SS). If this does work (remember, no guarantees), you should be able to separate these out, and then Import them into Encore.
I am sure that many other programs can do what Audition does, but that is my go-to Audio editor and know that it works well with both ripping from all sorts of muxed AV files, and will also handle Multi-track material.
Good luck, and please let us know if this works. Also, Neil Wilkes, a valued contributor to this forum, is the "Audio guru," and might well have better suggestions.
Hunt

Multiple Audio Streams?

I'm wondering if there is an application that will allow the computer to route multiple audio streams out of my Mac Pro. or- if anyone knows how to create an easily switchable audio routing panel rather than going through preferences.
Eg. I'm playing Itunes (or hulu or netflix) through my audio line out through my Samsung TV thorough a speaker system to watch online content through the TV and I want to work on files on the computer at the same time, say edit video using FCP and routing that audio through USB speakers at the desk.
Being able to create multiple audio stream routing would be a HUGE asset for someone like me. Even if it's not possible, I would certainly love it if Apple would incorporate a quick switch selector in the pulldown menu for audio volume...
Thoughts? Anyone?
Thanks!

Thanks, the "auxillary effect" totally helped me stream itunes music to my iSight with soundflower....giving webcam streaming my system audio, which I couldnt do before without hearing anything....ugh so complicated! but this works!! Sometimes apple is so rediculous and I know there are more features they could build in.
Thanks!

FLME to stream multiple audio streams

Is it possible to stream multiple audio streams together with one video stream using FLME.
I need to create a live streaming application that should be available in many languages. My idea is to send 1 video stream + n * audio streams.
Any ideas are appreciated.

FMLE is not able to stream multiple audio tracks.
Perhaps a third party encoder is able to do, but the problem is I think the playback
cause adobe´s pluggin does also not support multiple audio tracks.

Encoding multiple audio streams?

Can iDVD see and encode multiple audio streams for a single movie? Maybe this is asking too much but perhaps I've overlooked something...

The norm is to export video and audio out of Premiere Pro separately. Doing this, you will end up with one video file and multiple audio files. Bring them into Encore and add them to a timeline.

I down loaded ios7 and now I'm having trouble with my audio on Skype, does anyone knows how to fix it? Please help!

WWith the new ios7, I became frustrated in using my iPad3..I'm using Skype as my main communications with my love ones back home,now it seems that ios7 doesn't help me a lot for I'm having trouble with my audio communication coz my family can't hear anything from me.. My skype doesn't have any options or settings that I can check with to see if I can fix it...I need help...please if any of u knows how to fix it..I would greatly appreciate it...

You can try removing app then reinstalling. If that doesn't work
Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Having trouble with multiple user accounts

I am still getting used to Aperture and am having trouble with multiple user accounts on my Mac.
My wife and I have separate accounts on our Mac, and both have Administrator rights. We keep our Aperture library in the "Shared" folder, and I have made sure that both she and I have read/write capabilities on the Aperture library.
However, she has difficulty creating new projects, saving data, and viewing thumbnails in Aperture. Whenever she creates a project, it does not save into Aperture, and cannot be viewed by any user. In addition, changes she makes to photos do not save. She also cannot view thumbnails of any photos (although she can see the photos in the viewer).
Are there any changes I need to make to the user accounts so she can have all these capabilities?
Many Thanks.

Rather than having the Aperture library reside in the shared folder, keep it within a folder residing at the top level of your mac, eg.
I actually keep mine on one of my RAID disks.
Tony

Home Theater need. Multiple Audio Streams from 1 card or possible to use 2 car

I currently have 2 SB Li've's installed and a SB Audigy in the box.
I would like to be able to send different audio out to different devices. I need to send audio from a game interface called MAME 32 to a speaker system connected to the PC. I also use this PC as a home theater PC and want to send audio from my DVD playing software out to my TV(in analog stereo mode) and/or to my receiver(in Dolby Digital mode using the digital connector).
I would like to be able to run these seperatly without having to go into the Control Panel and switch the default sound card like I am doing now. I do not need to run them at the same time.

Bummer. Are you guys working on something that might have this capability? Seems to me that the closer we integrate PC's into our entertainment systems the more need we will have for the ability to do multiple audio streams, i.e. MP3's to the living room. DVD movie audio to the family room, XM radio classical station to the kitchen for mom etc..
Intel is offering this as an onboard solution that has the ability to do at least 2 different streams.
http://www.intel.com/design/chipsets/hdaudio.htmMessage Edited by relay on 0-26-2004 05:02 PM

Working with multiple audio tracks

Hello,
I'm working with video clips that have a stereo audio track (guide audio fed into the camera) synch'ed to 4 mono tracks (recorded from a variety of boom mics and lavaliers).
Although I've linked all the audio clips to the video, it still gets a bit cumbersome when performing T or L cuts. When I hold down the Option key, I still have to adjust each of the audio track separately.
Is there a more efficient way to deal with multiple audio tracks? Maybe some way to treat these audio tracks as one unit?
BTW I'm working in FCP 7.
Thanks,
Thien

One way:
Lock the video track.
Use the Edit Selection Tool to Select the audio transition points
This will automatically open the Trim window, where you can move the cut point - in this case I am moving the audio cut(s) 30 frames later than the video cut:
which gives me the displacement of all the tracks that I wanted:
You can use this quite quickly once you get used to it.
MtD

Export MXF with multiple audio channels for broadcast

Hi,
I work at a broadcast company as an editor. We always used FCP with the free sony xdcam plugin to export. This plugin seems to be one of the rare ways to export an MXF with 4 audio channels. I don't know exactly why we need to export it for broadcasting with 4 audio channels, but we do.
Since our workload has grown enormously the last few months and it will only become more we are optimizing our workflow. We also work with a lot of different endboards in After Effects and we made a nice template to work with. And since AE and Premiere can make a dynamic link we are considering changing from FCP to Premiere.
Now comes the question!: The only obstacle we could not find an answer to is exporting it with 4 audio channels as an MXF from Premiere CS5. Will there be some development on this level regarding CS6?
A solution to this should save us a lot of time!
Any help will be highly appreciated!
I also attached an example for the usual MXF files we export

I have the same problem. I have a project with multiple audio channels and I want to export them as individual channels in a MXF-file.
Method:
When I created a new sequence I choose "Multichannel" from the "Tracks" page. When I export the MXF OP1a, I choose 8 channels from the "Audio" page. None of the channels are muted.
Result:
The rendered file contains 8 channels, but only the first two channels contains any audio (main left + right), the rest of the channels are empty. Channel 1 and 2 contains the audio from all channels, but I want the channels to be seperated in the same way as they are layered in Premiere.
I don't understand your answer to wleoni75's question. Could you please help me further?

Export to Quicktime with multiple Audio Tracks?

Hi all --
I am on a tight deadline (48 hrs!) to deliver a Quicktime Prores file with 6 audio tracks: ch 1+2 dialog, ch 2+3 music&effects, ch 4+5 stereo mix. I'm working with FCP 6.
Now, I have figured out how to export the FCP 6 project to a Quicktime file with multiple audio tracks (in the Project settings, I specify 3 stereo channels, then I assign each audio track to one of the channels and export everything to a Quicktime file).
However, how can I send a stereo mix to channels 4+5?? FCP only allows me to assign each audio track one but not multiple output channels, and I didn't see a way where I could create a bus.
Can anyone help?
Thanks!

Something is being miscounted here. You say you have dialog on 1+2 and then say you have M&E on 2+3? I think you meant to say 3+4 and the stereo mix will be on 5+6. The easiest way to do this is to copy tracks 1-4 to tracks 5-8 by shift-option-dragging them there. Holding option will copy the tracks instead of moving them and holding shift will insure that the tracks will not move earlier or later. Then send 5+6 (dialog) to the 5+6 output (using the info in the above referenced discussion) and send 7+8 (music&effects) also to the 5+6 output. Done.

I'm having trouble with the audio on a lot of my games. How can that be fixed?

I'm having trouble with the audio on a lot of my games. How can that be fixed?

You need to be more specific. What sort of trouble - no audio, low volume, scratchy sound, etc.?
 Cheers, Tom

Having trouble with iCloud Photo Stream on a Windows Vista 64 machine.

Having trouble with iCloud Photo Stream on a Windows Vista 64 machine. Can you tell me why Photo Stream will not stay enabled. When I reboot, it will disable not to mention that it will not get any pushed photos. Is there a 64 bit version?

Hello tw_mama,
I was looking into the issue you are experiencing and found an article that may shed some light on the subject. It's called iCloud: Account troubleshooting found here: http://support.apple.com/kb/TS3988
This section in particluar:
I get an "Unsupported Apple ID" error when I try to sign in to iCloud from my iPhone, iPad or iPod touch.
Depending on how you created your Apple ID, you may not be able to create an iCloud account with your current Apple ID. If your Apple ID works in the iTunes Store, App Store, Game Center, FaceTime, or with other Apple Services, your Apple ID should work for iCloud. Also, if you created your Apple ID while you applied for a job at jobs.apple.com, your Apple ID should work for iCloud. If you cannot use your Apple ID with any Apple Services, it might not be compatible with iCloud. Contact iCloud Support for assistance.
All the best,
Sterling

Problem with xvid videos with two audio streams

/ Hi,
recently I purchased a Creative Zen X-FI2, it is working perfectly, but I only have one problem, I have some videos xvid with two audio streams (mpga), on VLC I can select either of the two audio streams but I haven't found if I can select the audio stream on the Zen player.
Does anyone knows how to select among different audio streams on a video?

The X-Fi2 doesn't have such an option.
If you still want to be able to watch the video with the second audio stream, I think the only possibility is to re-encode it using the second audiostream (or disable the first).

Troubles with Multiple Audio Streams.[ca0106]

Similar Messages

Maybe you are looking for