Troubles with my feeds:

I've been having difficulties with both of my iTunes feeds over the past week or so. One feed is two episodes behind, while the other is one episode behind, and I cannot for the life of me figure out why.
The episodes show up and download fine in other podcatcher applications, but not in iTunes, and those who subscribe now get the exclamation mark of doom.
Here are the links to my Feedvalidator details for each feed: http://www.feedvalidator.org/check.cgi?url=http%3A%2F%2Ffeeds.feedburner.com%2FC omicTiming
http://www.feedvalidator.org/check.cgi?url=http%3A%2F%2Ffeeds.feedburner.com%2Ft ypepad%2FvHDj
Each feed is valid except for a few errors, but none of those errors appear to be associated with the episodes not showing up on iTunes.
Any help would be greatly appreciated, as I'm at quite a loss here.

I had similar problems with my feed, but installing all the additional plug-in files corrected my feed. Unfortunately, it's 4 days later and iTMS still hasn't updated my Podcast's directory listing and still only shows one episode.
Anyway, that's my problem. Your problem can most likely be corrected by reading the part of the documentation where it says, "Optional Files."
AMD Athlon 64 Windows XP Pro Using WordPress 2.0.3 with the podPress 6.6 plug-in

Similar Messages

Real trouble with RSS feeds and subscription in iWeb

Hi
I've set up a site - www.jinja.me but I'm having real problems trying to set up the RSS feed for the blog and the subscription service for the picture pages.
When you click on the RSS or subscribe buttons this is the messages you get...
*Blog RSS* - Not Found - The requested URL /Jinja/Blog/rss.xml was not found on this server.
Apache/2.2.3 (Debian) PHP/5.2.0-8+etch11 proxy_html/2.5 Server at www.jinja.me Port 80
Subscribe - Not Found -The requested URL /Jinja/Automotive_files/rss.xml was not found on this server.
Apache/2.2.3 (Debian) PHP/5.2.0-8+etch11 proxy_html/2.5 Server at www.jinja.me Port 80
I've tried every way to get these to work and all the suggestions on this site don't work..!!
I purchased my site from telivo.com so they hold the domain name and the mobileme address is a mask apparently or the other way around, not sure!
I really am stuck and would appreciate any help you guys can offer.
Many thanks in advance......

JinjaV6,
I am unable to answer your question, but had a couple of questions myself about your website.
First off, i really like it, and i am looking to build something similar to document my travels when i get iLife '09.
Which template did you use?
Have you done any html coding or was it all simple 'drag and drop' stuff?
I presume you are using the blog feature provided by iWeb?
Thanks

Anyone having trouble with internet connection after downloading mountain lion

After installing Mountain lion to my mid 2011 imac 21" I am having trouble with my internet connection. Anyone else have to deal with this?

Are you on 10.8.2 as ypur profile says? If so, it's worth updating to 10.8.3 which was released last week.
http://support.apple.com/kb/DL1640
Here's a link to some suggestions that helped some users with similar problems in Lion. May still be relevant to MLion. Also check the links within the article:
http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/?utm_source=feed burner&utm_medium=feed&utm_campaign=Feed%3A+osxdaily+%28OS+X+Daily%29&utm_conten t=FaceBook
Also when I had wifi problems in the past, creating a new network location resolved it:
http://support.apple.com/kb/HT5289 (under the heading 'Making New Locations'.
I've also seen threads where users with wifi problems have successfully solved them by changing the channel in the router's wifi settings.

Trouble with Feedburner.

I'm having trouble with Feedburner.
I know this is not strictly connected to any Apple product, and it is not a iTunes problem... but I tryed to fix this since 4 days... without any result!
I'm the responsible for the website of my church, and I'm using Blogger for the blog, and Feedburner to produce the podcast link for iTunes. For the last 10 years I used it to produce a podcast for our church (in Italy). Had no trouble at all. Some days ago I tried to upload as usual our sunday podcast, but no media was created on the feed.
Looking at the XML source on Feedburner ther is no enclosure, while on the original post I put a media file storede on MediaFire (this one: http://www.mediafire.com/download/hgbgff4qptw2fy8/testimoniareanatale.mp3)
PodMedic says this: "Content Type reported: text/html; charset=UTF-8 Media enclosure not created because: The content type returned from your host server was a text type, not a binary media type. Podcast content should always return a binary media type, such as audio/mpeg for audio, or video/mpeg for video."
I tried all I could: stored file on a different storages (I normally use MediaFire), took all the other elements on the page connected to the feed that could interfere, checked several times if the media enclosure is mp3 (yes, and it works smootly on the blog), put the link straight on the blog page instead of on the title), piged and resync hundred of times... everything. But no solution at all. No media enclosure, they say.
I also tried to post an old media file which is working on a different post to see how Feedburner react: no media enclosure has been created even for this one.
There is anybody who struggled with the same issue?
My feed is:http://feeds.feedburner.com/blogspot/Allenatiallunit
The blog connected is: http://laveravite.blogspot.com
http://laveravite.blogspot.com/feeds/posts/default?max-results=36
Thanks to anyone who can help. Have a blessed Christmas!
Marco

None of your episodes work when subscribing. The media file URLs in the feed are Feedproxy ones, which lead to URLs in the same form as the one you quote above. These bring up a web page with links to download or play, not an .mp3 file.
Since the previous episodes appear in the feed it suggests that you originally had Mediafire set to provide a direct link to the feed but that you've somehow changed it to providing the page with the links, which won't work: then subsequently trying to add a new episode in Blogger has failed as it can't now see an mp3 file.
So you need to look into MediaFire. When you enter the URL for you media file into Safari it must play directly in Safari, not bring up a web page.

Trouble with webcam

Hi I am having trouble with my optia pro webcam. When it turns on it shadows with black and then progressively get's worse. I am using Windows Vista. Is there a link or download that will solve this problem. Thanks

Thanks for the replies, everyone.
I've made some progress. Like I said, before this problem occurred, I had to start my laptop's webcam software (CyberLink YouCam) before starting my .Net applications. If I failed to start YouCam, instead of a video feed I would receive an image from YouCam
instructing me to start YouCam. This is annoying because I have to run YouCam, which is not a light program, along with my stuff.
I wanted to find a way to run my .Net stuff on its own, so I began experimenting, which included uninstalling YouCam. After uninstalling, .Net couldn't get the video feed at all, so I reinstalled. This is when the weird error above appeared, but only for
SOME projects, oddly.
Last night I experimented further. I have three versions of Visual Studio on this system, so I pulled up 2010 to give it a try. Same issue. This lead me to believe the issue was not only outside of my code, but outside of project scope all together.
After a system restore to a point prior to uninstalling and reinstalling miserable YouCam, my video programs worked again, meaning I still have to start YouCam. It seems YouCam is monopolizing something, or maybe the un/reinstall messed something up.
The method I'm using from Emgu CV library is called Capture(), which creates an object to access the video feed. By default, it accesses the default camera. However, you can specify with an index a different camera. I'm suspicious that YouCam might be creating
a virtual webcam and making it the default, so perhaps if I specify a different index, I'll be able to access a camera directly.
Further thoughts are appreciated. Thanks.

I have been having a lot of trouble with the latest itunes update and my ipod classic 80Gb i.e. being unable to sync songs, but now i have no files at all on my ipod, it is completely blank when i view it from my computer. I need help, please, anybody.

As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
ASUSTeK Computer Inc. K50IJ
iTunes 11.1.5.5
QuickTime not available
FairPlay 2.5.16
Apple Application Support 3.0.1
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.1.3
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038B8600B98D1E0
Current user is not an administrator.
The current local date and time is 2014-03-21 16:52:39.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
**** Device Connectivity Tests ****
iPodService 11.1.5.5 (x64) is currently running.
iTunesHelper 11.1.5.5 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) ICH9 Family USB Universal Host Controller - 2934. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2935. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2936. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2937. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2938. Device is working properly.
Intel(R) ICH9 Family USB Universal Host Controller - 2939. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A. Device is working properly.
Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.

Here is what worked for me:
My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

Trouble with Toshiba built-in webcam: "unable to enumerate USB device"

I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
[ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 3433.781119] media: Linux media interface: v0.10
[ 3433.809842] Linux video capture interface: v2.00
[ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[ 3433.835976] usbcore: registered new interface driver uvcvideo
[ 3433.835977] USB Video Class driver (1.1.1)
Unfortunately, *most of the time* the camera seems invisible to my system, and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
# dmesg
[ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 480.171097] usb 3-1.3: device descriptor read/64, error -32
[ 480.341235] usb 3-1.3: device descriptor read/64, error -32
[ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[ 480.578007] usb 3-1.3: device descriptor read/64, error -32
[ 480.748151] usb 3-1.3: device descriptor read/64, error -32
[ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
[ 481.325196] usb 3-1.3: device not accepting address 6, error -32
[ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
[ 481.798926] usb 3-1.3: device not accepting address 7, error -32
[ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
Anyway, such a hack is unacceptable... So, my questions are:
is it indeed related to overcurrent protection ?
is there anything else I can try ?
should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
Last edited by $nake (2014-10-18 16:29:06)

uname -a
Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
pacman -Qi linux
Name : linux
Version : 3.9.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.9.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65562.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 25 May 2013 16:28:17 CEST
Install Date : Sun 02 Jun 2013 15:30:35 CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael

Trouble with OR in where clause

Hello,
I'm having trouble with execution speed. The problem seems to be with using OR in my where clause.
Here's the meat of the function where i_pledge_number is an input parm:
BEGIN
SELECT /*+ INDEX (pp) */ SUM(pp.prim_pledge_amount)
INTO return_amount
FROM
primary_pledge pp
WHERE
-- Get total if multiple allocations
pp.prim_pledge_number IN
(SELECT pc.pledge_number
FROM pledge_codes pc
WHERE pc.pledge_code_type = 'M'
AND pc.pledge_code = 'AC'
AND lpad(pc.pledge_comment,10,'0') = i_pledge_number)
-- Get total if single allocation
OR pp.prim_pledge_number = i_pledge_number;
RETURN return_amount;
END;
If I comment out either half of the OR statement (either the subquery or the pp.prim_pledge_number = i_pledge_number half) the function returns a value in .02 seconds. If I leave the OR in, it takes 2.764 seconds to execute?? Can someone please show me a better way (faster) to do this? I tried using nvl() around the subquery but couldn't get it to compile.
Thanks

These things are difficult to diagnose remotely, but here is something you can try....
SELECT */ SUM(pp.prim_pledge_amount)
INTO return_amount
FROM   primary_pledge pp
WHERE pp.prim_pledge_number IN (SELECT pc.pledge_number
                                 FROM pledge_codes pc
                                 WHERE pc.pledge_code_type = 'M'
                                 AND pc.pledge_code = 'AC'
                                 AND lpad(pc.pledge_comment,10,'0') = i_pledge_number
UNION ALL
SELECT i_pledge_number FROM dual)
   RETURN return_amount;
END;If that doesn't do anything (and it might well not) there are a large number of different ways we can recast this query. To save us further guessing please give us more details: execution plans, database version number, volumetrics.
Cheers, APC

A trouble with "LIKE" in a select statement

Hi!
I'm having trouble with "LIKE" in a select statement...
With Access I can make the following and everything works well:
SELECT name, birthday
FROM client
WHERE birthday LIKE '*/02/*';
but if try to do it in my application (it uses Access), it doesn't work - I just can't understand that!!!
In my application the "month" is always the currently month taken from the "System". Look what I'm doing...
String query1 = "SELECT name, birthday " +
          "FROM client " +
          "WHERE birthday " +
          "LIKE '*/" +
          pMonth +
          "/*' " +
          "ORDER BY birthday ASC ";
ResultSet rs = statement1.executeQuery(consulta1);
boolean moreRecords = rs.next();
The variable "moreRecords" is always "false", the query returns nothing although the table "client" has records that attend the query.
Please, anyone can help me?! It's a little bit urgent.
Thanks,
Katia.

Hi Katia,
I'll bet the problem lies with the characters you're using to escape the LIKE clause. You're using the ones that Access likes to see, but that's not necessarily what's built into the JDBC-ODBC driver class.
You can find out what the correct escape wildcard characters are from the java.sql.DatabaseMetaData.getSearchStringEscape() method. It'll tell you what to use in the LIKE clause.
I'm not 100% sure about your code. It doesn't use query1 anywhere. I'd do this:
String query = "SELECT name, birthday FROM client WHERE birthday LIKE ? ORDER BY birthday ASC";
PreparedStatement statement = connection.createStatement(query);
String escape = connection.getMetaData().getSearchStringEscape();
String test = escape + '/' + pMonth + '/' + escape;
statement.setString(1, test);
ResultSet rs = statement.executeQuery();
while (rs.hasNext())
// load your data into a data structure to pass back.
rs.close();
statement.close();Let me know if that works. - MOD

How do I use user_datastore with a feeder proc to add an mdata section?

Hi,
I have text data spread across a number of different tables. I have created a user_datastore with a feeder procedure that creates an xml document which is then indexed into a dummy column on the parent table. This works fine. However I need to add an mdata section to the index, via my xml document. I haven't seen any examples of this being done in conjunction with the ctxsys.auto_section_group option of the create index statement, and am wondering if it is possible?
Could somebody furnish me an example of how I achieve this.
Oracle 11.2.
Thanks
Ralph

You can't use MDATA with AUTO_SECTION_GROUP. AUTO means it automatically assigns zone sections for every tag it finds - if you want anything other than zone sections you must use BASIC_SECTION_GROUP, XML_SECTION_GROUP or HTML_SECTION_GROUP and manually define your sections.

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

Publishing swf file with xml feed

I am working in actionscript 3 trying to create a flash banner ad that will be put on multiple sites. The ad will grab a rss feed and display a number from that feed insie the banner ad. The Flash file works fine on my local computer when I test it. The feed is showing up just fine in the ad. When I publish the ad for the web and test it out on my server, the feed does not display in the ad. I have checked to make sure network access is selected in the publish settings. I also have a crossdomain.xml policy file on the server with the feed. My server is listed in the policy to allow access. I keep thinking I am overlooking something, but can't figure it out. Any help would be greatly appreciated.
Here is the code for the action script:
var rssLoader:URLLoader = new URLLoader();
var rssURL:URLRequest =
         new URLRequest("http://www.rssfeed.com/rssfeed");
rssLoader.addEventListener(Event.COMPLETE, rssLoaded);
rssLoader.load(rssURL);
var rssXML:XML = new XML();
rssXML.ignoreWhitespace = true;
function rssLoaded(e:Event):void{
    var rssXML:XML=new XML(e.target.data);
trace (rssXML);
    if (rssXML.channel.item[0].description >= 61)
        {rssXML.channel.item[0].description="60+"}
        testXML.text=rssXML.channel.item[0].description;
Here is the crossdomain.xml policy file:
<?xml version="1.0"?>
        <!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
        <cross-domain-policy>
        <allow-access-from domain="domain.net"/>
        <allow-access-from domain="www.domain.net"/>
        <allow-access-from domain="anotherdomain.com"/>
        <allow-access-from domain="www.anotherdomain.com"/>
        <allow-access-from domain="yetanotherdomain.com>"/>
        <allow-access-from domain="www.yetanotherdomain.com>"/>
        </cross-domain-policy>
Message was edited by: WRGrun262

try:
Security.loadPolicyFile("http://www.rssfeed.com/crossdomain.xml");
var rssLoader:URLLoader = new URLLoader();
var rssURL:URLRequest =
         new URLRequest(http://www.rssfeed.com/rssfeed);
rssLoader.addEventListener(Event.COMPLETE, rssLoaded);
rssLoader.load(rssURL);
var rssXML:XML = new XML();
rssXML.ignoreWhitespace = true;
function rssLoaded(e:Event):void{
    var rssXML:XML=new XML(e.target.data);
trace (rssXML);
    if (rssXML.channel.item[0].description >= 61)
        {rssXML.channel.item[0].description=60+}
        testXML.text=rssXML.channel.item[0].description;
this should be crossdomain.xml in the rssfeed.com root directory
<?xml version="1.0"?>
        <!DOCTYPE cross-domain-policy SYSTEM http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd>
        <cross-domain-policy>
<site-control permitted-cross-domain-policies="master-only"/>
<allow-access-from domain="domain.net"/>
        <allow-access-from domain="www.domain.net"/>
        <allow-access-from domain="anotherdomain.com"/>
        <allow-access-from domain="www.anotherdomain.com"/>
        <allow-access-from domain="yetanotherdomain.com>/>
        <allow-access-from domain="www.yetanotherdomain.com>/>
        </cross-domain-policy>
Message was edited by: WRGrun262

Edge Animation having troubles with iOS devices within Muse Site

Hi All! I've been creating a mobile version of my website www.rinkdesigns.com and have it all complete. I created an animation/navigation bar within Adobe Edge Animate and imported it into Muse. It functions AMAZINGLY on my Nexus 4 (Android) in Chrome but on a buddies iPhone 5 Chrome only loads about 3/4 of the animation/nav bar, in Safari the animation does not load at all and half of the page background does not load either. Please check out the preview site here http://rinkdesignsmobile.businesscatalyst.com/phone
Has anyone else been having animation/mobile troubles with iOS devices? Any hints as to how you fixed your errors would be extremely helpful! I also posted this question in the Muse forum and haven't gotten a response...
Thanks,
John

Or, how about this:
Does anyone know how to have Edge Animate objects that utilize "_top" in an open url trigger make the Muse site that they are a part of open a new window/tab with that action (as opposed to having it open the url in the current page, or using "_blank" in the trigger)?

Trouble with 3rd party VST installs for Garageband, can't find instruments

Hi,
I am having trouble with Audio Units for Garageband when installing 3rd party software, VSTs, loops, instruments. I have more issues with Logic Pro. I am hoping that it is the same underlying issue and that I am just missing something. I have the manuals (not great for troubleshooting). I am confused with some installs use User Library and others use the Computer Library. I do go to the mfgs sites for updates. The installs sometimes work as standalones but I don't see ALL of the components of the software in say Garageband or Logic. Mostly, I am missing the "instruments" and "loops" that I want to access within the DAW. Some examples:
• Here is some of the software I am talking about: East West sample libraries (Play and Native Instruments); Vienna Symphonic librarires; Sylenth1 (just last night); Sample Tank 2 and Total Workstation 2 from IK Multimedia and others.
• In GB I see the Audio Units for Vienna, Play, Sylenth, some of the IK Multimedia but NOT any instruments when I go to the "Sound Generator" -- I seem to be missing the instruments and loops. I see less AUs in Logic Pro. Some of these are VST instruments.
• Can I just drag-drop samples to the library folders to fix this?
• The plug-ins do not seem to work (though Sylenth1 worked for a single sound). When there is a standalone app (as in Sample Tank), I finally got the "sounds" to be reinstalled and loaded, those sounds/samples don't show up in any DAW.
• When and if the sounds/loops/samples show up in GB's "Instruments" section will I be able to tell that they belong to that particular software or library?
Thanks in advance.
John

Found the answer myself, it was simple:
• Select the Track
• Show the Instrument (info area)
• Click on Edit
• Click on the "Sound Generator" pop up field.
• At the bottom of the pop-up list, select from the Audio Units that you have installed. This is where you see "Sample Tank 2, Vienna Instruments..."
• NEXT -- IMPORTANT: CLICK ON THE PICTURE next to the Sound Generator pop-up field.The AU unit loads up, the interface pops up, you load up the instruments in this AU Unit. You do NOT see the sounds from the AU unit in the normal Apple instrument list.
This was not intuitive but once you know it, fairly simple.
Still, the devil is in the details -- more questions on the way.

Troubles with my feeds:

Similar Messages

Maybe you are looking for