Troubles with usb 3

I've bought a sound inteface but it doesent work with USB 3 of my MacBook Air Lion 10.7.5. Any help

Resett NVRAM/PRAM
https://support.apple.com/kb/HT1379

Similar Messages

  • Help I itunes will not recognize my iphone or ipod. Trouble with USB driver, device not running in safe mode, and HDCP not supported.

    Help! When I connect my iphone or ipod touch to my computer, windows recognizes my device but itunes will not. I can still see my songs, videos, and access the itunes store but my phone and itunes store have no connection so it does me no good. I have for 2 days now tried every trouble shooting method posted with no luck. I think I may have finally found a lead. My Apple Mobile Device USB Driver is showing up under portable mobile devices while it is supposed to be showing up under universal serial Bus controllers from my understanding? Also, while running my diagnostic report under itunes it also says itunes is not running in safe mode, it is not showing enabled in windows firewall (which it is checked), and the HDCP is not supported. I don't know what to do? I am in tears here, someone please help!!!

    See Here for Device not recognised:
    http://support.apple.com/kb/TS1538
    Here for General Support:
    http://www.apple.com/support/
    This may also be helpful:
    AMDS for Windows
    http://support.apple.com/kb/TS1567

  • For everyone having trouble with USB not being recognized......

    When doing the installation, when it tells you to plug the Nano into the USB port to make sure it can find it(or whatever it says) DONT do it! Click on the box that says you want to continue installation without plugging it in. You have to download ALL of the software and all of the updates and THEN plug it in and magically it works! I have been working on this for 2 days and my 12 yr old accidentaly figured this out!

    What if that doesn't solve the problem? =S
    I've been having the same problem and I've tried like every possible solution that the apple support gives (totally deleting and reinstalling apple products, verified the driver, checked for viruses, disable every program that could prevent Itunes from reading my Ipod, changing usb ports, etc...) but NOTHING has solved it. It's kind of frustrating, it's been more than I week trying to solve this and nothing yet.
    The only thing I can say for sure is that it isn't about the ipod, because I tried with another pc and it worked.
    Please find a solution!!
    Thanks

  • [SOLVED] Audio setup troubles with usb headphones and built-in sound

    Hello,
    I Just started using Arch about a month ago after going through many Debian and Ubuntu variants.  After all my frustrations with apt pinning to get working 10bit video playback, only to have everything else uninstalled by crappy dependency checking, I am extremely happy with how easy it was in Arch.
    Now I am having difficulties perfecting my audio setup.  Almost everything else is set up to satisfactory levels but I have yet to bring the sound to the same standard.  With just ALSA my built in audio works, but defaults to the unused hdmi on my nvidia graphics.  I have managed to get it to switch at some point but with ALSA alone I could never get my usb headset to work at all.
    By using pulseaudio as well I was able to get simutaneous playback, which is ideal, but had choppiness and other issues with just the usb headset.  I followed some instructions found on the arch wiki and other places on the net for choppiness in both ALSA and pulse and tried the fixes listed in various combinations.  I ended up with outcomes such as pulse not starting, no sound at all, creepy ticking in usb and perfect sound on speakers, and my current situation of perfect sound on speaker and acceptable but tinny sound on usb which degrades over time requiring restart.
    Is anyone able to give any advice or point me to any guides I may have overlooked?
    Setting up sound from scratch is something I have never done before coming to Arch, so I don't know what commands are useful for audio specifically, but learning is one of the reasons I decided on Arch. As for commands I do know, lspci and lsusb, relevant entries are as follows:
    spricc ~ $ lspci | grep Audio
    00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05)
    01:00.1 Audio device: NVIDIA Corporation GF104 High Definition Audio Controller (rev a1)
    Bus 004 Device 003: ID 1532:000e Razer USA, Ltd
    USB device is a Razer Megalodon headset, NVIDIA Audio is of no interest to me, unless it is not what i think it is.
    Thanks to anyone who takes the time to read this.
    Last edited by spricc (2012-03-23 15:21:11)

    I managed to find a solution.
    https://wiki.archlinux.org/index.php/Pu … oppy_sound
    Following this exactly didnt work before, but setting the sample rate to 192000 instead seems to have done the trick

  • Ulx troubles with usb-2416

    Ive been working on a project that requires the use of a pressure controller and a DAQ(usb-2416). The project requires iterative testing at various pressure levels. Ive atleast have that working properly, but when trying to read "nchannels 1 sample' I get the error "Background Operation already in progress". I dont really understand the background process its refering to. Any Ideas on what could be causing it? 

    Dear SnowLeopard,
    I am also getting same error in my USB-1608G Device. Please let me know that how did you solved the problem.
    With regards
    Shourya

  • Trouble with USB Printer/Scanner on Vista x64 and Airport Extreme

    I recently just purchased the Airport Extreme and set up my wireless network. I had a little trouble setting up my printer on my PC workstation, but finally realized I needed to download Bonjour for Windows 64-bit to get it working since I was using Vistax64. So now its working. However, I have an HP PSC 2510 Photosmart all-in-one printer/fax which also containes a scanner. Is there any way to get the scanner working on this for either my MacBook Pro or preferably on my Win Vista PC? I see no option to allow for this. If anyone can help or point me in the right direction, I would very much appreciate it. Thank you.

    Hello Ambien. Welcome to the Apple Discussions!
    Is there any way to get the scanner working on this for either my MacBook Pro or preferably on my Win Vista PC? I see no option to allow for this. If anyone can help or point me in the right direction, I would very much appreciate it.
    Unfortunately, none of the "advanced" functions (scanning, copying, faxing, etc.) of multi-function printers are supported by the USB port of any of the AirPort base stations.

  • Is anyone using VMware fusion and having trouble with USB devices not being recognised

    I have an Terratec Axon AX50 Guitar to Midi interface. The editor software is not Lion compatible so I have attempted to run that bit in Windows 7 on a virtual machine.
    The problem is that the VM machine will not recognise the USB device, even though when it asks which machine I want to connect to it names the device correctly.
    Any Ideas ?

    Device not recognized by iTune
    http://support.apple.com/kb/TS1591

  • Trouble with USB Superdrive

    I recently bought a season of a TV series over the Internet, I had to import it as the particular series could not be found on DVD locally. Everything was going brilliantly until I tried to load the third disc in the set.
    If I could just get the disc to load I could watch my show in VLC Media Player (stupid region lock limiting my choice of player). But, the blasted Superdrive has spat out the disc about 20 or so times in a row so far.
    Is there something I can do to force the drive to load the disc?

    If it is a single disc that you are having an issue with it might be the disc is damaged in some way either scratched or some other issue with the disc.It is not a mechanical issue if you can place a commercial DVD movie in the SuperDrive and it plays.
    I have been dealing with all manner of Optical Drives for many many years and there are certian steps to go through to troubleshoot the problem.
    It also means that you need to contact the company you purchased the TV series from and re-Download it again.This time do not use cheap discs like Memorex. When you burn use top of the line DVD Discs, like Sony, Verbatim, JVC, Maxell,  (Tajo Yuden) is considered by many the best.
    Remember that DVD-R is the most  widely recognised and used across the board and will play in any Burner or Player.
    Good Luck
    Don
    One last thing It could be a problem the way they sent it to you.
    The speed of your network could also be an issue.

  • Macbook pro 13" i7 and trouble with iphoto and finder

    Hi, I've just bought last week the new macbook pro 13" i7.
    I've just replaced the HDD for an SSD Intel 510 Series 120Go and it works very well !!!
    But since yesterday when I've plugged my EOS 450D in order to transfer some photos... The problem is that I've a bug with iphoto: when I want to empty the trash (from iphoto), it doesn't work, photos are again in the trash, or when I look some picture it bugs !!!
    At this moment iphoto doesn't run correctly, you know like when the "mouse" is searching all the time !!! Just after the finder and another soft bug... but not all the the time.
    This trouble appears too in the menu: "files" appears with less word or "photos" or "event"...
    So I've re install OSX since Time machine but nothing.
    I've re install the original HDD but always the same !!!
    I've empty the RAM with "cmd+alt+P+R" but always the same...
    I've re install OSX with CD but nothing.
    Problem with graphic card ? with RAM ? Motherboard ?
    I don't think that it is th SSD because I've the same problrm with the original HDD.
    I don't understand the macbook is new.
    I need some help please.
    Thanks in advance.
    Best
    Yann 57

    Something strange !!!
    At this time I've plugged an external HDD to backup with Time machine and it freeze again !!! And now this is my internet exporer !!!
    I've shut down manually the computer and empy the PRAM...
    Is there a trouble with USB port ? The same thing since I've plugged my EOS 450D yesterday with the USB port...
    Please Help
    Spec:
    Macbook pro 13" intel core i7
    4Go RAM
    SSD 120Go Intel 510 Series
    MAc OSX 10.6.7

  • Trouble with Toshiba built-in webcam: "unable to enumerate USB device"

    I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
    # lsusb
    Bus 004 Device 002: ID 8087:8000 Intel Corp.
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
    Bus 003 Device 003: ID 8087:07dc Intel Corp.
    Bus 003 Device 002: ID 8087:8008 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    # dmesg
    [ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
    [ 3433.781119] media: Linux media interface: v0.10
    [ 3433.809842] Linux video capture interface: v2.00
    [ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
    [ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
    [ 3433.835976] usbcore: registered new interface driver uvcvideo
    [ 3433.835977] USB Video Class driver (1.1.1)
    Unfortunately, *most of the time* the camera seems invisible to my system, and I get
    # lsusb
    Bus 004 Device 002: ID 8087:8000 Intel Corp.
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 003: ID 8087:07dc Intel Corp.
    Bus 003 Device 002: ID 8087:8008 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    (note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
    # dmesg
    [ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
    [ 480.171097] usb 3-1.3: device descriptor read/64, error -32
    [ 480.341235] usb 3-1.3: device descriptor read/64, error -32
    [ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
    [ 480.578007] usb 3-1.3: device descriptor read/64, error -32
    [ 480.748151] usb 3-1.3: device descriptor read/64, error -32
    [ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
    [ 481.325196] usb 3-1.3: device not accepting address 6, error -32
    [ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
    [ 481.798926] usb 3-1.3: device not accepting address 7, error -32
    [ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
    Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
    I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
    I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
    Anyway, such a hack is unacceptable... So, my questions are:
    is it indeed related to overcurrent protection ?
    is there anything else I can try ?
    should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
    If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
    Last edited by $nake (2014-10-18 16:29:06)

    uname -a
    Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
    pacman -Qi linux
    Name : linux
    Version : 3.9.4-1
    Description : The linux kernel and modules
    Architecture : x86_64
    URL : http://www.kernel.org/
    Licences : GPL2
    Groups : base
    Provides : kernel26=3.9.4
    Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
    Optional Deps : crda: to set the correct wireless channels of your country
    Required By : nvidia
    Optional For : None
    Conflicts With : kernel26
    Replaces : kernel26
    Installed Size : 65562.00 KiB
    Packager : Tobias Powalowski <[email protected]>
    Build Date : Sat 25 May 2013 16:28:17 CEST
    Install Date : Sun 02 Jun 2013 15:30:35 CEST
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature

  • TS1814 hello i have  a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing to t

    hello i have  a trouble with my i phone... i was trying to update a new software and at the end it says that there is some error and i cannot turn my i phone bak on all it shows is itunes logo in the midlle and usb cable with an arrow pointing at the logo. If anyone knows what it is and what i should do please get back to me as soon as possible many thanks.

    http://support.apple.com/kb/HT1808

  • I am having trouble with my iphone, I updated it and when I turned on the screen the ituns and USB icon appear. I've tried to restore it but it sends me to the ituns icon right away and I dont know what to do.

    I am having trouble with my iphone, I updated it and when I turned on the screen the ituns and USB icon appear. I've tried to restore it but it sends me to the ituns icon right away and I dont know what to do.

    you may have to do these stepps a few times http://support.apple.com/kb/HT1808

  • USB troubles with iMic?

    I have used the iMic off and on for a few years, and I've noticed that sometimes it is recognized when I connect it to the USB port and sometimes it isn't. When it isn't, it is really frustrating! Today I started unplugging other USB devices and trying different ports until I finally got it to work.
    (I was using the Sound Preferences panel to look for and select the iMic, and I was also watching in System Profiler)
    Are there any "gotchas" that I need to be aware of when using iMic with USB in combinations with other USB devices? Like, don't use that type of USB device in this or that port, or there is a Product ID identification problem when using something from Griffin and XYZ?
    I'd like to figure out how to use the iMic consistently and reliably.
    Model Name: Mac Pro
    Model Identifier: MacPro1,1
    Processor Name: Dual-Core Intel Xeon
    Processor Speed: 2.66 GHz
    Message was edited by: ToddH_321

    Ycode or Xcode? Anyway, this forum is strictly for installation and setup. For XCode, and software development, check the Developer forum, as well http://developer.apple.com/

  • I have been having a lot of trouble with the latest itunes update and my ipod classic 80Gb i.e. being unable to sync songs, but now i have no files at all on my ipod, it is completely blank when i view it from my computer. I need help, please, anybody.

    As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
    This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    ASUSTeK Computer Inc. K50IJ
    iTunes 11.1.5.5
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 3.0.1
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0038B8600B98D1E0
    Current user is not an administrator.
    The current local date and time is 2014-03-21 16:52:39.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
    **** Device Connectivity Tests ****
    iPodService 11.1.5.5 (x64) is currently running.
    iTunesHelper 11.1.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH9 Family USB Universal Host Controller - 2934.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2935.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2936.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2937.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2938.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2939.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • (Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

    Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
    I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
    Let me know if you know why this is happening.

    With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
    Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
    While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
    I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
    You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
    Something you can try:
    System Preferences -> Network
    Gear icon on the bottom left, next to the [+] [-] icons.
    Select *Set Service Order...*
    Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
    NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

Maybe you are looking for

  • Oracle infrastructure installation problem

    hello everybody I am new to Oracle OID SSO configuration ,i want to use the concept of SSO in my project. i followed the OIM Disk1 and Disk2 for windows installer from the following link http://onlineappsdba.com/index.php/2007/12/27/install-oidsso-10

  • Movie purchase question

    Hi all, I know it's my one fault, but I wanted to download the latest 2012 Red Dawn movie and it not on the movie page but the old one is which I already have a DVD of. Can I get it deleted and a refund if I haven't downloaded it all and haven't watc

  • Problems printing multiple copies on 1 page in iPhoto version 9.5.1

    I'm having problems printing multiple copies of a photo in my version of iPhoto 9.5.1. I've tried looking at the answers given in Macworld forums for iPhoto '09 but I can't follow them as they refer to clicking 'preferences' - but this button isn't d

  • Firefox will not shut down and I have to use the force quit option on my MAC to get it back. What can I do?

    At almost every shutdown of Firefox it fails to completely shutdown and when I go to start it up again I must force quit to get it to completely shutdown. The code says Firefox (not responding)

  • Changing Report Fields

    Dear Forum I am using Version XI. I have a number of old reports that have been created using the table linking method. Due to our application product versioning i need to convert these into a series of views. Is there any method within the standard