Troubles with WCM Designer

"Assigning Content to a Contribution Region!" doesn't work!
When I push button I see You should have been redirected: "xx-xx-xx/xxx/news2?usesecondary&SSContributor=true&SSForceContributor=true&previewId=0
And nothing happened! 80(
Log of Designer
Failed to load language specific resource library (C:\Program Files\Oracle\Universal Content Management\Site Studio\Designer\10gR3\resources\en\SSWebBrowserExRes.dll)
Failed to load language specific resource library (C:\Program Files\Oracle\Universal Content Management\Site Studio\Designer\10gR3\resources\en\SSHtmlTidyRes.dll)
etc

Hi,
I am also getting the same error. Also after that, site hierarachy and assets window are not visible.
Please advice.
Thanks,

Similar Messages

Having trouble with sharepoint Designer.

I am new to sharepoint and have found it very unwelcoming. I need to edit a list for our company and for some reason i can not seem to figure out how to do it. i navigate to the page i need click edit in designer and go to edit the form. I can add a row
below were i need to but when i go to add a box to type into the other boxes are known as form fields. and all i have found are text boxes. it would be great if someone could give me step by step directions on how exactly to make this happen.
Fyi. its sharepoint designer 2010. Window 7 64Bit.
Thanks,
Kai M.

Hi Kai,
Here is the references of using SharePoint designer to edit form for a list:
http://office.microsoft.com/en-in/sharepoint-designer-help/create-a-custom-list-form-using-sharepoint-designer-HA010378258.aspx
http://sharepoint-videos.com/sp10-webinar-modifying-sharepoint-list-forms-using-sharepoint-designer-2010-and-infopath-2010/
In addition, I'd recommend using InfoPath form to customize form for SharePoint list:
http://office.microsoft.com/en-in/sharepoint-designer-help/edit-list-forms-using-infopath-2010-in-sharepoint-designer-HA101631624.aspx
http://msdn.microsoft.com/en-us/library/office/gg180738(v=office.14).aspx#ip2010CustomizeList_Pt2
Regards,
Rebecca Tu
TechNet Community Support

Trouble with opening/creating Server Model Diagrams

I created server model diagrams by drag-and-dropping specific tables from the Server Model Navigator. Is it supposed to take a LONG time
for this step (e.g., 3 whole minutes for one table) or should it be basically "immediate"? They eventually made it, but seemed unreasonably long!
I saved the diagrams, quit, and come back to the repository, see the diagram names, click on a diagram, verify the elements inside, everything
looks good -- until I try to open the diagram, it (Design Editor) locks up every time!!
Does anybody know why I'm having either one of the above problems? Is there any setting I need to configure?
(By the way, I'm using Designer 6i with an Oracle 8.1.7 database.)
Thanks in advance.
Brenda

Could be your memory. Designer takes alot to run, as you may know. Minimum should be 256mb. Close all apps and try to open
the diagram again. I have had lots of trouble with my designer locking up!

I'm having trouble with My adobe Creative Suite 4 Design Standard programs opening. They will bounce to open but won't open up and eventually I will need to force quit as they aren't responding. I'm thinking it may be a font issue but need some support A

I'm having trouble with My adobe Creative Suite 4 Design Standard programs opening. They will bounce to open but won't open up and eventually I will need to force quit as they aren't responding. I'm thinking it may be a font issue but need some support ASAP!

Nobody can tell you anything without proper system info or other technical details like the crash logs.
Mylenium

"An error occurred accessing your Microsoft SharePoint Foundation site files" connecting site with SharePoint Designer

I have a SharePoint 2013 environment with 1 AD Server, 1 DB Server and 1 APP Server, with 13 Web Applications running under the SharePoint.
Recently I rebuilted the application because of some infrasctrucutre problems, and I was able to solve all of them, except one. I can't connect to any of those 13 Web Apps with SharePoint Designer. When I try to connect, it always ask credentials, then it
seems like loading the site, then the error appears:
"An error occurred accessing your Microsoft SharePoint Foundation site files. Authors - if you are authoring against
a Web server, please contact the Webmaster for this server's Web site. WebMasters - please see the server's application event log for more details."
I've spent hours troubleshooting it, but none of the information I found was valid. I've already tried to clean the cache, but didn't work. I found plenty of related data of this
error with FrontPage and old versions of SharePoint, but nothing helped. All the Web Apps are SPD-Enabled at Site Collection Administration. I've tried connecting from many different PC's. The 15/LOGS folder doesn't get any data from this error, neither the
Event Viewer.
I really don't know what else to do. Please Help!

I found the answer of my issue was in a .NET Agent installed by NewRelic on the server. I found a connection trouble with Fiddler, then I end up figuring this out:
This can be the result of Real User Monitoring so the first step in troubleshooting would be to disable it and see how it affects the application. The .Net Agent injects snippets of javascript into the header of pages sent to the users browser to measure the
page load time on the user's end.
You can disable RUM by editing newrelic.config and changing this line:
<browserMonitoring autoInstrument="true"/>
to this:
<browserMonitoring autoInstrument="false"/>

I'm having big trouble with my new mainboard: Part II

Hi
I haven't got any more replies to my post "I'm having big trouble with my new mainboard" by Krelian 2003.09.13 at 05:25. Please help! I've been struggling with this for a LONG time. And now my computer won't boot at all! Sometimes the LED's in front of the computer lights up for half a second, and nothing more happens. The only sign of life is the green light in the LAN jack. It happened after I took the ide cable for my harddrive in and out of the mainboard. This is insane, how can that suddeny happen :O ?! I was asked by wonkanoby to post max amps for my PSU, I did, and I really need to know if I maybe need a new PSU, since he asked that. Can a new PSU solve all the problems mentioned in my previous posts? Everything was fine except that I couldn't get into Windows, before i tried another harddrive on my computer. How can that complicate things so much? I have tried going barebone, and taking out the cmos battery and setting the jumpers JBAT1, J10 and J11. I have also tried every suggestion I got. Please help! I really need to get this fixed!
-Krelian

Some power supplies or designed so that if there is a short or overload they shut them selfs off and some will not turn back on. Some have a relay that will click back on and work, some you have to cycle the power switch. Those that won't come back on will have to be replaced. I'm not saying that yours is that type as I have no way of telling. But if you have a friend who will loan you a good power supply you might try it. As someone else said just turning off the power will not darn all the power from some motherboards. To test this turn off your power supply than turn on the computer with the start botton. Mine will flash the lights and fans will start to spin than die. So every time you turn off computer to work on it. After turning off PSU hit the start botton to drian any power left in it before working on it. Also do this after unplugging it just to make sure.

The trouble with 'expression' -- how to edit that

I just walked to the corner bodega ( even though its korean sooo bodega is misleading ).. to get some beer...
ITS BEER THIRTY -- yipee !
and on way back down the block where I live ( which is suburban ) some boy kid on a bike was riding and playing with a girl kid ( probably was his slightly older sister - these kids probably around 12 years old ) in front of a rental property with some spanish americans hanging out in their cemented yard on hammocks near bar b q...with their own kids...(they have planted another hopeful "veg garden" around the perimeter of their so called yard...tomato plants etc )...so anyway, the picture here is a "neighborhood" of sorts with a somewhat lower middle class family atmosphere in a fairly lower class area on the verge of becoming middle class ( with God's help ).
And anyway, I passed by the boy kid on the bike and smiled at him cause he seemed to be a decent kid having fun with his friend ( they were sorta laughing about something and having fun before I showed up as the big "adult" and looked at me ). His smile back was like sunshine and true and he immediately recognized he could keep having fun with his friend and I wasn't a "threat" , but instead some sorta "neighbor". She did the same more or less ( I think she had some devious design re: the game they were playing ... like " OK, you think you're so great on that bike, try to CHASE me ! " or something like that....kid stuff... and fun thank God. This neighborhood has it's share of bad things going on in the streets at times. And that leads to my focus on " The trouble with expression".
A lot of people, like me for example, can't express themselves well in some ways. I didn't say , " Hi there kids ! What's new ? " when I met them on the way back from the bodega. I didn't stop and ask what the heck they were laughing about. Nor did I speak to the spanish people adjacent to the kids ...in their "yard" ...with the bar b q and hammock and obvious friday afternoon socializing they were into....
We in nyc area are typically a mixed bag of races... I'm white, kids were african amer ( black but more like brownish if you ask me ), spanish people like mexicans IMO... who cares. This is suburbia so you can imagine how more mixed it is in the city.
Anyway, the reason I don't express myself so well in situations like that ( spontaneously on the street ) is cause I used to stutter real bad as a kid.. couldnt talk... so I clamed up. All my life I've been fighting that disability ( and other "challenges" re: learning, reading , writing, asthma , etc ) in terms of the "repercusions". Kids like me make fun of me cause I stutter...I can't fight back verbally and lash out physically... become a "maniac". Get kicked out of city schools etc... Trouble maker. Can't express myself, fight back with words....when kids are mean to me. After a while they dont matter much as if they are mean I just keep quiet and keep mouth shut and start "thinking" instead... how to keep on top of this person and not let things get crazy... meet the challenge.
Turns out I'm not stupid and at some point my being " quiet" becomes a positive thing.. peers start asking my advice.. I'm suddenly a " deep thinker" in their eyes. I go from being disabled ( stupid ) to being " a deep thinker" about the age of puberty... when nobody knows what they are doing anymore.
I start thinking about expressing myself some other way than talking.. like maybe draw pictures... paint stuff, do things to have fun with people that doesnt put me in the " limelight".. where I have to talk etc. More success follows this tendency to socialize and express myself... and I discover that chics like the strong silent type.
( I have been into gymnastics thru my fathers infactuation with it since age 2 -- which I think eventually ( inadvertantly ) " cured me " of many of my learning disabilities etc -- (talk to an OT about this and modern child development stuff to know what I mean here )
Meanwhile I am very fond of dogs as my family has dogs one after the other and I am one of their best friends. I find I can communicate with dogs better than I can communicate with people sometimes. This seems to be a problem in some cases with some people, but for me it never got crazy... where I " loved dogs " more than I " love people ". I have never loved any dog more than any person and shudder when I think of those who do. Those people who do have more problems than I ever had to deal with.
And now, after all these years ( I am now 60 ), working on movies and tv stuff etc as a crew person with some college fine art schooling ( eventual photo major ) to get me started, I got into this " editing " stuff... A program I can actually " use " on my mousey computer introduces me to a more " final product " than I ever had access to before.
BUT I don't shoot motion pic stuff, cant afford that - and never could before basically, and now I think about the triple threats and future of movies and tv as a business... as well as the tools ( in this case the editing programs in conjunction with the cameras ( arri, panavision etc ) ) and the desire to express something ...
This has to be ( if you want an audience ) ... " tell a story ". You could just put a camera on a rocket ( strap it to the rocket ) and shoot the takeoff etc and show that.. but you need a V.O. saying " well, I just shot off a rocket and this is what it looked like"...to bring the experience to the audience... or else IMO there is no story.
Which leads to what's going on now in the world of reality tv, episodic tv , some big movies, etc. Telling a story is more than showing you stuff that you just wouldnt have seen if you hadn't been there yourself. Telling a story is more like saying something that bridges the gap between your own experience of life and its challenges ( of being part of your neighborhood and making sense of your own childhood and being an adult now maybe ).. and what others also have gone through to get to the same conclusions....
This is the object of " expression" IMO, whether you can talk about it, draw pictures about it, or make music about it...
And the editing program is a tool to help do that.. it is not the end all or purpose of life or the " personal crusade" in the long run.
It's one reason scary snakes often shock people out of their desire for comfort and predictable living... makes you think about that one serpent in the garden of eden you create for yourself .... and IMO who cares what editing program you use to write that and shoot it ??

Steve Grisetti, the MOD of the Premiere Elements forum and co-founder of a video/photo/editing Web site, Muvipix, did a nice article, "Don't just make a movie - tell a story." His audience was more consumer video editors, than the folk that we see around here, but his points were well-made, and were embraced by many in the Muvipix community.
I think that too many, forget that concept - and I am talking Hollywood and NYC here. It's almost as if, when the story breaks down, they instinctively know to throw in a car chase, or big explosion.
I know that I cite it too often around The Lounge, but that was what I enjoyed most about the LOR trilogy. It told a story. Now, though I had some exposure to the story, when much younger, I have to admit that I never read Tolkien, though almost everyone, that I knew, was busy with every book. Still, I only knew some of the high points, and not much more. However, almost immediately, I was drawn into the story, and only wished that I did not have to wait so long between episodes. The FX were cool, and I am a technoid sort, but it was the story that hooked me. I had read several articles on the FX production, so WAS looking for some of that, but what I wanted was the story. This is one that I will buy the BD "Director's Cut" of, and do a marathon. I have seen each segment, maybe three times, but never back to back to back. I still need to fill in a few blanks, and an entire day of viewing should do that - no phone, no visitors, nothing but LOR.
As far as human communications, I can talk, even more than I write here, but only concerning things that I care about. I am horrible at "small talk," and would rather addrss an auditorium of 10,000, on something that matters to me, than talk about the weather to a single person at a fund raiser. Not that long ago, I was seated next to a potential donor at a charity dinner. I was rather dreading it, and when she mentioned that she did not drink (what, no wine?), I was worried. At some point, early in the evening, the subject turned to politics. Now, I usually am very quiet on my feelings, as they are not exaclty politically correct, and worry about hurting feelings, or making a scene. I fielded a question on Senatorial candidates, and just decided to answer from my heart. Her eyes lit up, and I did not notice that the event had ended. Her husband was standing, as was my wife, and we were talking politics, talk-radio, FoxNews, Senator John Kyl, Will Rogers and much more. I found that we were kindred spirits. Finally, our spouses pulled us apart, and we departed. We continued that conversation at 2 - 3 more events during "the season." One day, my wife informed me that she had just given $10M to the foundation - the largest single gift ever. At least she wasn't a screaming liberal, as I would surely have really messed up the deal... However, had it all been small talk, I would have found a reason to excuse myself and hide in the bar for a few hours.
Also, the way that our society has developed, I will smile, nod, and say "hello" to strangers on the street, but always leave it at that. I am sure that many walk past and think "he wasn't all that friendly." They are probably right, but at least I was pleasant to them and did not rob them! Heck, I will usually tell telemarketers, "No, but thank you for your generous offer on that time-share... "
Hunt

Trouble with connecting to an App and restoring In App Purchases

I am having trouble with restoring my in app purchases. I had purchased the full season for crazy night out a while back but when I got the app again after restoring the app the full season wasn't on and it is trying to charge me for it. I had also bought the fantasy date app and the multipacks and unlike crazy night out it recognizes I made the purchase but when I click restore purchases or buy pack it won't download and it says can not connect to server and for me to check my settings and try again also for the ones I do have that were free when I click play or download all videos it says it can't connect to servers and the videos don't play. Is there anything I can do to retrieve these purchases back and get the videos to play.
It's not the Internet everything else works.

ftp doesn't work well in modern network environments, and the design of the protocol itself is basically incompatible with the inclusion of firewalls in modern networks. And it transmits the authentication credentials in cleartext.
Put another way, see if ssh and particularly sftp works here (either directly via the sftp command, or via a sftp GUI tool) works for your requirements.
Failing that, [here is ftp set-up information|http://labs.hoffmanlabs.com/node/942].
If it's the DNS set-up, then here is some [DNS server set-up information|http://labs.hoffmanlabs.com/node/1436]. And your Mac OS X client will need to have access to the same DNS information your server is using.

Trouble with Safari - it keeps shutting down - all because I tried to get rid of MacKeeper

trouble with Safari - it keeps shutting down - all because I tried to get rid of MacKeeper ad - after I install what I thought was an update since I already had MacKeeper, it would not allow me to continue without buying the new one. Make a long story short I switch to Firefox and deleted as much as I could of Safari (files, preferences etc) Now I'm at OS Yosemite X 10.10.2 and would like to get Safari up and running again - I've searched for Adware in applications etc but could not find it. Found what to do from the community, but before I go that route...Do I have to know where or if I actually have this spyware?    And if I were to reinstall Maveric - would my files and such be undisturbed? so that only Safari would be replaced?    I"M LOST .... (as if you couldn't tell)
I've been working with Mac for 30 years or more and although I'm hands on taught the only thing I lack is the newer "buzz words" so if you can help me out - please make it simple ?? thanks

There is no need to download anything to solve this problem.
You may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

New FocusTraversalPolicy Mechanism Does Not Work Well With OO Designs

I would like to complain about the new focus traversal mechanism not working well with object-oriented GUI designs.
Specifically, we have many reusable panel classes that can be swapped in and out of reusable dialog classes. On some of these panels, the default focus traversal is not what is desirable, perhaps because one component on the right side of the window is just slightly higher than a component on the left side, maybe due to the component on the right having a label on top, and so the default focus goes to the component on the right instead of the left. So we have a need to be able to explicitly define the order of components in some panels.
If I try to define a focus traversal policy in the panel's constructor, a NullPointerException is thrown because the panel's focus cycle root is null (the panel has not been added to any dialog or frame yet).
If I try to associate a focus traversal policy at the dialog level, it would have to explicitly reference its child panels' inner components, which would break the encapsulation of the panels. It would also make it hard to have generic dialog classes into which various reusable panel objects can be swapped.
Someone suggested making each panel a focus cycle root. This makes it hard to "break out" of one panel to move on to the next panel in the dialog. Special keys would have to be assigned to try to cycle out, and these keys would have to be different than the normal traversal keys, making them inconsistent and nonintuitive to the user. Also, the focus policy would have to know if the dialog had more than one panel, what order the panels were in to know whether to cycle to the next panel or not, etc. This is a mess.
Does anyone have any idea how to get around these problems? I have tried using a global focus policy with a global hash map of prev/next component key-value pairs, but we are still running into trouble with some deeply nested tabbed dialogs. It's just not possible to always have the focus cycle root in existence at the point where you want to explicitly define traversal between two components, or when you are trying to establish the default component for a panel in a tabbed pane.
Has anyone else run into similar issues?
Robbie Gilbert
[email protected]

I agree completely. One of the popular consultants on this forum stated that the new focus mechanism was more versatile and only a little more complex. I would say it's more than a little complex given the trouble average programmers are having understanding how it works...at least at first...and after understanding it realizing that they are going to have type their fingers off to update their code. Oh, and the dread of maintaining this awful mess.
I'm currently having the same problem as you Robbie. Some of my reusable panels need special tab ordering...that's not usually a problem, in most programming environments, till now. Now I have to go around the world and back just to get my stupid cursor to be in the right place when I hit the tab key??!!! and special key mappings just to get out of a focus cycle...lame.
And how is an IDE graphical designer going to work with this? It's not, that's how...ok maybe if some kind person or company creates a custom focus traversal policy editor of some kind, I don't know.
Good grief Sun! We need something to help us meet our deadlines, not solutions that force us to spend 80% of our time customizing every stinking bit of UI functionality we need!!!
JTables are even worse. I've mastered most of the garbage that is JTable after many months of pain and I don't know how I'm going to help my peers understand them in any short amount of time. Most of them were Oracle Forms programmers, not that that is any great solution either. But they will likely have problems.
In conclusion, I wish I had chosen another UI technology for our new product client, and may yet.

Still having trouble with Gallery Slideshow

Still having trouble with Gallery Slideshow, in Live Preview it bounces to the top of the page but not centered where I like it.
Hope someone can help.
Thanks

no is not hosted anywhere Im working on a Fantasy Photography site. from the image the top one is design mode and bottom is preivew mode. But my problem is
as you can see from the images ( red boxes ) it moves when is in preview mode and the sizes of the images change as well as you can see. I dont know why? I tried figuring it out
but no luck. I hope this helps.
thanks

Trouble with PDF fonts - fields only

We're having trouble with our PDFs once the data is merged into the PDF template. All of the merged data appears cut in half in the form fields so only the top half of the letters are shown; the rest of the document is fine. We think this could be due to a font issue, but loading different fonts haven't seemed to make any difference. Could this be caused by anything besides the fonts?
Thanks!
KH

Klye
Pdf is designed for presenting information graphically to reduce the file size. This reduction is achieved by making it an uneditable - something that comes in handy if you don't want people to alter your content.
You can (using a pdf writter) create pdf forms where information can be added in to a text field or box. However if you want to edit the content from a pdf file then you could select the text and copy and paste it in to a document like Pages or Word and then re-export when you're finished.
But I'm affraid you can't edit pdf as such - this is the case on Macs and PCs. If you need to edit documents on different platforms then you'll need to find a common editor. There's Office for Mac (student teacher versions) or you could try OpenOffice Org - it's free, works on both Macs and PCs, and will convert most Word documents provided there's not too many tables or a complex layout format.
Hope this helps
Stu

Trouble with SQL Expressions

Hello everyone,
I'm having trouble with this SQL expression that works in 8.5, and XI R2 runtime and designer, but I cannot edit the expression. As soon as I open the SQL Expression and click the X-2 check button, the error following
SQL Expression I'm trying to run:
(Select Distinct b1.CandEmploymentType
    from ceistaffing a1
    inner join ceisubmittal b1 on a1.submittalid = b1.ceisubmittalid
Where a1.Staffingchainid = CEIHRPROJECTEDACTUAL."STAFFINGCHAINID"
    and b1.createdate in (Select max(b2.createdate) from ceistaffing a2 inner join ceisubmittal b2 on a2.submittalid = b2.ceisubmittalid where a2.staffingchainid = a1.staffingchainid))
The Errror I Receive After Clicking the X-2 button:
Crystal Reports
Error in compiling SQL Expression :
Failed to retrieve data from the database.
Details: ADO Error Code: 0x
Source: SalesLogix OLE DB Provider
Description: The multi-part identifier "CEIHRPROJECTEDACTUAL.STAFFINGCHAINID" could not be bound.
Native Error: [Database Vendor Code: 181797304 ].
OK
This is the SQL statement passed to the database:
SELECT (Select Distinct b1.CandEmploymentType
from ceistaffing a1
inner join ceisubmittal b1 on a1.submittalid = b1.ceisubmittalid
Where a1.Staffingchainid = CEIHRPROJECTEDACTUAL."STAFFINGCHAINID"
and b1.createdate in (Select max(b2.createdate) from ceistaffing a2 inner join ceisubmittal b2 on a2.submittalid = b2.ceisubmittalid where a2.staffingchainid = a1.staffingchainid))
If I reverse the order of the where clause as follows, I do not get the error
(Select Distinct b1.CandEmploymentType
from ceistaffing a1
inner join ceisubmittal b1 on a1.submittalid = b1.ceisubmittalid
Where CEIHRPROJECTEDACTUAL."STAFFINGCHAINID" = a1.Staffingchainid
and b1.createdate in (Select max(b2.createdate) from ceistaffing a2 inner join ceisubmittal b2 on a2.submittalid = b2.ceisubmittalid where a2.staffingchainid = a1.staffingchainid))
This is the working SQL statement passed to the database.
SELECT (Select Distinct b1.CandEmploymentType
from ceistaffing a1
inner join ceisubmittal b1 on a1.submittalid = b1.ceisubmittalid
Where CEIHRPROJECTEDACTUAL."STAFFINGCHAINID" = a1.Staffingchainid
and b1.createdate in (Select max(b2.createdate) from ceistaffing a2 inner join ceisubmittal b2 on a2.submittalid = b2.ceisubmittalid where a2.staffingchainid = a1.staffingchainid))
FROM   "sysdba"."CEIHRPROJECTEDACTUAL" "CEIHRPROJECTEDACTUAL"
I figured I would just reverse the where clause statements, but then I came to this one that I couldn't get to work:
(Select case when tmp.restartcount = 0 then 'F' else 'T' end from
(Select Count(b.restart) as restartcount from ceistaffing a inner join ceihrprojectedactual b on a.staffingchainid = b.staffingchainid
where a.candcontactid = (Select distinct candcontactid from ceistaffing a2 where a2.staffingchainid = CEIHRPROJECTEDACTUAL."STAFFINGCHAINID")
and b.restart = 'T'
and a.createdate = (Select min(a1.createdate) from ceistaffing a1
               where a1.createdate > (Select max(a3.createdate)
                              from ceistaffing a3
                              where a3.staffingchainid = CEIHRPROJECTEDACTUAL."STAFFINGCHAINID")
               and a1.candcontactid = a.candcontactid)) as tmp )
I've burned an entire day trying to find some solution. Are there any patches out there that will fix this?
I'm running Crystal Report XI Release 2 SP2 - Version 11.5.8.826
Thank you, ...Rob

Okay, to simplify the illustration of the problem Iu2019m facing, Iu2019ve created a bare bones example as described below:
I've created a report that returns all contacts from our "CONTACT" table. On the report, I've created a SQL expression to return a count of all contacts with the similar last name, as shown below:
(Select count(a1.ContactID) from CONTACT a1 where a1.LASTNAME = "CONTACT"."LASTNAME")
When I try to save the SQL expression, I get this error:
Crystal Reports
Error in compiling SQL Expression :
Failed to retrieve data from the database.
Details: ADO Error Code: 0x
Source: SalesLogix OLE DB Provider
Description: The multi-part identifier "CONTACT.LASTNAME" could not be bound.
Native Error: [Database Vendor Code: 205193720 ].
OK
This SQL expression works fine in CRW 8.5, but no luck in XI R2 SP4 - As mentioned above in the thread, this seems to be an issue solely with how XI R2 is parsing the SQL Expression. If I remove the "A1" alias from my expression all is good, but that will not work for some of the more advanced SQL expressions I have that are using joins and sub queries.
What will it take to get this recognized as an issue worthy of a hot fix? I'm at a stand-still here, facing the unfortunate possibility of having to re-architect many of my reports. Please help.
Thank you, ...Rob
Edited by: Rob Bartram on Aug 6, 2008 3:45 PM

Satellite 5100/201: trouble with video card or overheat?

Hy,
I'm experiencing trouble with video on a Satellite 5100/201. It seems that when I press on the left side above the graphics card or press a key on the keyboard on that side, the screen starts to be scrambled and vertical lines appear. At the end windows XP resets giving a critical error on the device and the video passes to 640x480. Same thing occurs when running Linux Suse 9.0.
My doubt is what is the cause: the graphics card corrupted or overheating due to the fan not as efficient as originally (my laptop is almost two years old. Did someone succed in finding the cause and resolved the problem, also with the Toshiba assistance?
Any help welcome.

Hi,
I don't think so that Toshiba has problems with the design. You are talking about two different models with two different hardware and for different user profiles!
The 1900 is a Desktop replacement notebook with "desktop" components like processors and the Satellite 5000 is a Multimedia notebook!
Hint: If you had not done it yet, perhaps you could install the graphic card driver once again. If this don't helps, it is the best way to recover the notebook with the Toshiba CD. (this set the notebook to software default settings and the notebook should be work)
Bye Bob

TROUBLE WITH PDF'S!

So I am having trouble with editing anything i save on a PDF. I recently saved a research paper in PDF format so it would be compatible at my school where there are microsoft only computers. I opened and realized I couldn't edit anything! I tried looking around settings to see if it was a "read only" file but couldn't find anything to make it so I can revise the PDF file. can someone help me?

Klye
Pdf is designed for presenting information graphically to reduce the file size. This reduction is achieved by making it an uneditable - something that comes in handy if you don't want people to alter your content.
You can (using a pdf writter) create pdf forms where information can be added in to a text field or box. However if you want to edit the content from a pdf file then you could select the text and copy and paste it in to a document like Pages or Word and then re-export when you're finished.
But I'm affraid you can't edit pdf as such - this is the case on Macs and PCs. If you need to edit documents on different platforms then you'll need to find a common editor. There's Office for Mac (student teacher versions) or you could try OpenOffice Org - it's free, works on both Macs and PCs, and will convert most Word documents provided there's not too many tables or a complex layout format.
Hope this helps
Stu

Troubles with WCM Designer

Similar Messages

Maybe you are looking for