Troubleshoot acpi

After a recent update I lost the ability to detect most of the acpi events via acpi_listen on my thinkpad - wireless kill switch, lid open/close, sleep button, etc.
Unfortunately, I don't remember exactly what was updated with my last pacman -Syu, so I don't know where to start my troubleshooting. Is there a way to make pacman list packages that were recently updated?

/var/log/pacman.log

Similar Messages

  • Mac Mini Crashed 2x In Past Week - How To Troubleshoot Console Errors?

    Hello, my mac mini 2011 has crashed on me twice in the past week. Once it happened while I was returning to my desk. I heard a noise... like something electrical shutting down abruptly.  The second time it happened, the mac mini was in the process of restarting.. (same sound), it just automatically restarted again and then booted up. Not sure if that was related to an update that was waiting to install.
    My issue is, how do I troubleshoot the crash? I know most people go to the console.... I have no idea how to define what is going on or find out exactly what caused the crash. There are a ton of messages in there... some are normal?  Other things definitely indicate a problem but I'm not sure how to fix it.
    I copied and pasted the message from the time I rebooted here.. Some highlights I see:
    1) Problems with iCal
    2) Some deny machine lookups: What is this?   ([1034]) mdworker(1034) deny mach-lookup com.apple.ls.boxd
    3) Missing semicolin in dictionary
    4) and unknown Cisvo VPN?  SystemStarter[513]: Unknown service: CiscoVPN"
    5) Some file permissions errors: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist"
    6) SendFlattenedData error:  coreservicesd[59]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildApplicationLaunch to notificationID=140"
    7) Driver errors:
    5/24/13 4:23:00.049 PM ConsumerTouchDriver[241]: Could not find image named 'TouchRingToggleLEDSlitOff'.
    5/24/13 4:23:00.060 PM ConsumerTouchDriver[241]: Could not find image named 'DKTouchRingToggleLeft'.
    5/24/13 4:23:00.067 PM ConsumerTouchDriver[241]: Could not find image named 'DKTouchRingToggleRight'.
    8) Various invalid connections: WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195 (there are more of these)
    9) Boot Strap lookup failures: timezoned[160]: bootstrap_look_up failed (44e)
    Just too many here as you can see. Please note some network names and IP addresses have been redacted. I also took out some multiple Google Update entries for brevity. They look normal for most part except for the part that it showed up about 7 or 8 times.
    if anyone knows how to decipher this please let me know. 
    5/24/13 4:16:11.446 PM coreservicesd[60]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=9487
    5/24/13 4:16:11.523 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
    5/24/13 4:16:11.526 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
    5/24/13 4:16:11.526 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit] Cancel UI for running services with Client PID: 94616
    5/24/13 4:16:17.470 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
    5/24/13 4:16:17.471 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
    5/24/13 4:16:17.472 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit] Cancel UI for running services with Client PID: 96498
    5/24/13 4:16:17.691 PM iTunes[84926]: 2013-05-24 04:16:17.691209 PM [AVSystemController] Stopping AirPlay
    5/24/13 4:16:18.186 PM WindowServer[82]: CGXUnregisterWindowWithSystemStatusBar: Invalid window (31a1)
    5/24/13 4:16:18.960 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
    5/24/13 4:16:18.961 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
    5/24/13 4:16:18.961 PM com.apple.ShareKitHelper[863]: --warning: [ShareKit] Cancel UI for running services with Client PID: 66380
    5/24/13 4:16:45.365 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildApplicationReady to notificationID=8709
    5/24/13 4:16:47.839 PM com.apple.usbmuxd[53255]: stopping.
    5/24/13 4:16:47.852 PM com.apple.launchd.peruser.502[181]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 9 seconds
    5/24/13 4:16:48.394 PM com.apple.usbmuxd[9101]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
    5/24/13 4:16:49.637 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildDeath to notificationID=8709
    5/24/13 4:16:49.903 PM 1PasswordAgent[319]: [HYBI] socketDidDisconnect: Error Domain=GCDAsyncSocketErrorDomain Code=7 "Socket closed by remote peer" UserInfo=0x1050a0c80 {NSLocalizedDescription=Socket closed by remote peer}
    5/24/13 4:16:50.020 PM prl_naptd[6584]: Exiting Parallels Network Daemon
    5/24/13 4:16:51.741 PM Parallels[9136]: Stopping Parallels Dispatcher Service
    5/24/13 4:16:53.719 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildDeath to notificationID=8709
    5/24/13 4:16:54.137 PM Parallels[9142]: Stopping Parallels networking
    5/24/13 4:16:54.184 PM watchdog[9146]: Stop watching /Applications/Parallels Desktop.app/Contents//MacOS/prl_naptd
    5/24/13 4:16:54.342 PM watchdog[9154]: file /var/run/prl_watchdog-2323cae42fd8.pid, pid 6661
    5/24/13 4:16:54.348 PM watchdog[9156]: /Applications/Parallels Desktop.app/Contents//MacOS/prl_naptd stop
    5/24/13 4:16:54.369 PM prl_naptd[6683]: Exiting Parallels Network Daemon
    5/24/13 4:16:54.618 PM WindowServer[82]: dict count after removing entry for window 0x3d is 0
    5/24/13 4:16:54.826 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.826 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.827 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.829 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.829 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.829 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.829 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.830 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.831 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 211847
    5/24/13 4:16:54.831 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 211847
    5/24/13 4:16:54.831 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 211847
    5/24/13 4:16:54.831 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 204967
    5/24/13 4:16:54.831 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 204967
    5/24/13 4:16:54.832 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 204967
    5/24/13 4:16:54.832 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 204967
    5/24/13 4:16:54.832 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 204967
    5/24/13 4:16:54.833 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 204967
    5/24/13 4:16:54.833 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 210883
    5/24/13 4:16:54.833 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 210883
    5/24/13 4:16:54.833 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 210883
    5/24/13 4:16:54.838 PM com.apple.launchd[1]: (com.apple.ShareKitHelper[863]) Exited: Killed: 9
    5/24/13 4:16:54.839 PM coreservicesd[60]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=229
    5/24/13 4:16:54.841 PM com.apple.launchd.peruser.502[181]: (com.sophiestication.mac.CoverSutra.agent[298]) Exited: Killed: 9
    5/24/13 4:16:54.855 PM coreservicesd[60]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=306
    5/24/13 4:16:54.867 PM com.apple.launchd.peruser.502[181]: (com.dayoneapp.dayone-agent[305]) Exited: Killed: 9
    5/24/13 4:16:54.868 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=137
    5/24/13 4:16:54.868 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=11081
    5/24/13 4:16:54.881 PM com.apple.launchd.peruser.502[181]: ([0x0-0x2c02c].com.apple.inputmethod.ironwood[272]) Exited: Killed: 9
    5/24/13 4:16:54.890 PM coreservicesd[60]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=161
    5/24/13 4:16:54.891 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=11093
    5/24/13 4:16:54.903 PM UserEventAgent[11]: Captive: [UserAgentDied:139] User Agent @port=45575 Died
    5/24/13 4:16:54.909 PM 1PasswordAgent[319]: Shutting down 1PasswordAgent 3.8.21 #32009 built Apr 24 2013 16:09:31
    5/24/13 4:16:54.924 PM com.apple.launchd.peruser.502[181]: ([0x0-0x5c05c].com.apple.AppleSpell[369]) Exited: Terminated: 15
    5/24/13 4:16:54.924 PM com.apple.launchd.peruser.502[181]: ([0x0-0x63063].com.apple.ImageCaptureExtension2[432]) Exited: Killed: 9
    5/24/13 4:16:54.940 PM coreservicesd[60]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=218
    5/24/13 4:16:54.941 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=226
    5/24/13 4:16:54.941 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=286
    5/24/13 4:16:54.953 PM com.apple.launchd.peruser.502[181]: ([0x0-0x60b60b].com.apple.iTunesHelper[17906]) Exited with code: 1
    5/24/13 4:16:54.954 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.954 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.955 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.955 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.955 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:54.969 PM Office365Service[8836]: System shutdown notification
    5/24/13 4:16:54.969 PM com.apple.launchd.peruser.502[181]: ([0x0-0x1a0da0c].com.apple.iCal[90332]) Exited: Killed: 9
    5/24/13 4:16:54.970 PM com.apple.launchd.peruser.502[181]: (com.apple.mdworker.shared.04000000-0000-0000-0000-000000000000[7581]) Exited: Killed: 9
    5/24/13 4:16:55.163 PM coreservicesd[60]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=153
    5/24/13 4:16:55.173 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:55.173 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:55.174 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:55.174 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:55.174 PM WindowServer[82]: CGXGetConnectionProperty: Invalid connection 32195
    5/24/13 4:16:55.191 PM com.apple.launchd.peruser.502[181]: ([0x0-0x4d04d].com.wacom.Consumer_TouchDriver[339]) Exited with code: 1
    5/24/13 4:16:55.234 PM com.apple.launchd.peruser.502[181]: (com.apple.mdworker.mail.01000000-0000-0000-0000-000000000000[9082]) Exited: Killed: 9
    5/24/13 4:16:55.899 PM com.apple.launchd.peruser.502[181]: (com.wacom.pentablet[318]) Exited with code: 1
    5/24/13 4:16:55.917 PM com.apple.launchd.peruser.502[181]: (com.apple.UserEventAgent-Aqua[209]) Exited: Killed: 9
    5/24/13 4:16:55.918 PM Parallels[9159]: Parallels Networking was stopped
    5/24/13 4:16:56.018 PM com.apple.launchd.peruser.502[181]: (com.apple.storeagent[859]) Exited: Killed: 9
    5/24/13 4:16:56.035 PM com.apple.launchd.peruser.502[181]: (com.apple.quicklook[9069]) Exited: Killed: 9
    5/24/13 4:16:56.038 PM Parallels[9162]: Unloading kernel extension prl_netbridge.kext
    5/24/13 4:16:56.204 PM coreservicesd[60]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildDeath to notificationID=107
    5/24/13 4:16:56.397 PM loginwindow[38]: DEAD_PROCESS: 38 console
    5/24/13 4:16:56.453 PM com.apple.launchd.peruser.502[181]: (com.evernote.EvernoteHelper[306]) Exited: Killed: 9
    5/24/13 4:16:57.527 PM Parallels[9172]:  - kext com.parallels.kext.netbridge found loaded.
    5/24/13 4:16:57.589 PM WindowServer[82]: CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
    5/24/13 4:16:57.589 PM WindowServer[82]: Session 256 released (1 references)
    5/24/13 4:16:57.589 PM WindowServer[82]: Session 256 released (0 references)
    5/24/13 4:16:57.590 PM WindowServer[82]: loginwindow connection closed; closing server.
    5/24/13 4:16:57.605 PM imagent[263]: Quit - notifying about shutdown
    5/24/13 4:16:57.605 PM imagent[263]: Quit - shutting down daemon
    5/24/13 4:16:58.677 PM Parallels[9182]: Unloading kernel extension prl_vnic.kext
    5/24/13 4:16:58.701 PM airportd[9167]: _doAutoJoin: Already associated to “SkyNet”. Bailing on auto-join.
    5/24/13 4:16:58.000 PM kernel[0]: com.parallels.kext.prlnet 8.0.18483.860857 is unloading.
    5/24/13 4:16:58.000 PM kernel[0]: free vms_list while it is not empty
    5/24/13 4:16:59.181 PM Parallels[9187]:  - kext com.parallels.kext.vnic found loaded.
    5/24/13 4:16:59.000 PM kernel[0]: com.parallels.kext.vnic 8.0.18483.860857 is unloading.
    5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic_bus: wait for detach for 0
    5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic_bus::detach_handler for 0
    5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic_bus: detached 0
    5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic: destroyed vnic0
    5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic_bus: wait for detach for 1
    5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic_bus::detach_handler for 1
    5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic_bus: detached 1
    5/24/13 4:16:59.000 PM kernel[0]: com_parallels_kext_prl_vnic: destroyed vnic1
    5/24/13 4:16:59.400 PM Parallels[9194]: Unloading kernel extension prl_usb_connect.kext
    5/24/13 4:16:59.441 PM loginwindow[9176]: Login Window Application Started
    5/24/13 4:16:59.593 PM Parallels[9199]:  - kext com.parallels.kext.usbconnect found loaded.
    5/24/13 4:16:59.797 PM Parallels[9207]: Unloading kernel extension prl_hid_hook.kext
    5/24/13 4:16:59.820 PM WindowServer[9204]: Server is starting up
    5/24/13 4:16:59.864 PM WindowServer[9204]: Session 256 retained (2 references)
    5/24/13 4:16:59.864 PM WindowServer[9204]: Session 256 released (1 references)
    5/24/13 4:16:59.884 PM WindowServer[9204]: Session 256 retained (2 references)
    5/24/13 4:16:59.885 PM WindowServer[9204]: init_page_flip: page flip mode is on
    5/24/13 4:17:00.034 PM WindowServer[9204]: mux_initialize: Couldn't find any matches
    5/24/13 4:17:00.000 PM kernel[0]: /prl_hid/ Parallels HID Helper stopped.
    5/24/13 4:17:00.119 PM WindowServer[9204]: GLCompositor enabled for tile size [256 x 256]
    5/24/13 4:17:00.119 PM WindowServer[9204]: CGXGLInitMipMap: mip map mode is on
    5/24/13 4:17:00.143 PM WindowServer[9204]: WSMachineUsesNewStyleMirroring: false
    5/24/13 4:17:00.143 PM WindowServer[9204]: MPServiceForDisplayDevice: Invalid device alias (0)
    5/24/13 4:17:00.143 PM WindowServer[9204]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    5/24/13 4:17:00.143 PM WindowServer[9204]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    5/24/13 4:17:00.143 PM WindowServer[9204]: Display 0x04248b01: GL mask 0x2; bounds (0, 0)[2560 x 1440], 42 modes available
    Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162a02c3, Unit 1, Rotation 0
    UUID 0x0000061000009227162a02c300000000
    5/24/13 4:17:00.143 PM WindowServer[9204]: Display 0x003f003c: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, boot, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003c
    5/24/13 4:17:00.143 PM WindowServer[9204]: Created shield window 0x4 for display 0x003f003f
    5/24/13 4:17:00.144 PM WindowServer[9204]: Created shield window 0x5 for display 0x003f003e
    5/24/13 4:17:00.152 PM WindowServer[9204]: Created shield window 0x6 for display 0x04248b01
    5/24/13 4:17:00.152 PM WindowServer[9204]: Created shield window 0x7 for display 0x003f003c
    5/24/13 4:17:00.154 PM WindowServer[9204]: Display 0x04248b01: GL mask 0x2; bounds (0, 0)[2560 x 1440], 42 modes available
    Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162a02c3, Unit 1, Rotation 0
    UUID 0x0000061000009227162a02c300000000
    5/24/13 4:17:00.154 PM WindowServer[9204]: Display 0x003f003f: GL mask 0x8; bounds (3584, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    5/24/13 4:17:00.154 PM WindowServer[9204]: Display 0x003f003e: GL mask 0x4; bounds (3585, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    5/24/13 4:17:00.155 PM WindowServer[9204]: Display 0x003f003c: GL mask 0x1; bounds (3586, 0)[1 x 1], 1 modes available
    off-line, enabled, boot, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003c
    5/24/13 4:17:00.155 PM WindowServer[9204]: CGXPerformInitialDisplayConfiguration
    5/24/13 4:17:00.155 PM WindowServer[9204]:   Display 0x04248b01: MappedDisplay Unit 1; Vendor 0x610 Model 0x9227 S/N 371851971 Dimensions 23.50 x 13.23; online enabled, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
    5/24/13 4:17:00.155 PM WindowServer[9204]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
    5/24/13 4:17:00.155 PM WindowServer[9204]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
    5/24/13 4:17:00.155 PM WindowServer[9204]:   Display 0x003f003c: MappedDisplay Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
    5/24/13 4:17:00.159 PM WindowServer[9204]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x0000000f, accelerator 0x0000324f, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
    5/24/13 4:17:00.160 PM WindowServer[9204]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x0000000f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    5/24/13 4:17:00.365 PM loginwindow[9176]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    5/24/13 4:17:00.482 PM WindowServer[9204]: Created shield window 0x8 for display 0x04248b01
    5/24/13 4:17:00.483 PM WindowServer[9204]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    5/24/13 4:17:00.571 PM airportd[9167]: _doAutoJoin: Already associated to “SkyNet”. Bailing on auto-join.
    5/24/13 4:17:00.000 PM kernel[0]: Kext  not found for unload request.
    5/24/13 4:17:00.756 PM launchctl[9225]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    5/24/13 4:17:00.000 PM kernel[0]: Kext  not found for unload request.
    5/24/13 4:17:01.000 PM kernel[0]: Kext  not found for unload request.
    5/24/13 4:17:01.093 PM BezelServices 236.3[9176]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
    5/24/13 4:17:01.000 PM kernel[0]: Kext  not found for unload request.
    5/24/13 4:17:01.837 PM com.apple.SecurityServer[25]: Session 100444 created
    5/24/13 4:17:01.948 PM loginwindow[9176]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    5/24/13 4:17:02.120 PM loginwindow[9176]: USER_PROCESS: 9176 console
    5/24/13 4:17:02.152 PM WindowServer[9204]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    5/24/13 4:17:02.172 PM airportd[9167]: _doAutoJoin: Already associated to “SkyNet”. Bailing on auto-join.
    5/24/13 4:17:02.243 PM WindowServer[9204]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    5/24/13 4:17:02.256 PM WindowServer[9204]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    5/24/13 4:17:03.167 PM WindowServer[9204]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04248b01 device: 0x1092cba10  isBackBuffered: 1 numComp: 3 numDisp: 3
    5/24/13 4:17:06.074 PM launchctl[9225]: com.apple.findmymacmessenger: Already loaded
    5/24/13 4:17:09.762 PM TabletDriver[9280]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app
    5/24/13 4:17:09.772 PM CVMServer[84]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
    5/24/13 4:17:09.849 PM launchctl[9285]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    5/24/13 4:17:09.960 PM TabletDriver[9280]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/TabletDriver.app
    5/24/13 4:17:10.001 PM locationd[9283]: NOTICE,Location icon should now be in state 0
    5/24/13 4:17:10.100 PM CVMServer[84]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
    5/24/13 4:17:10.227 PM UserEventAgent[9275]: cannot find useragent 1102
    5/24/13 4:17:11.593 PM mdworker[9273]: Unable to talk to lsboxd
    5/24/13 4:17:11.774 PM mdworker[9272]: Unable to talk to lsboxd
    5/24/13 4:17:11.000 PM kernel[0]: Sandbox: sandboxd(9288) deny mach-lookup com.apple.coresymbolicationd
    5/24/13 4:17:12.079 PM timezoned[9289]: bootstrap_look_up failed (44e)
    5/24/13 4:17:12.218 PM timezoned[9289]: bootstrap_look_up failed (44e)
    5/24/13 4:17:12.419 PM sandboxd[9288]: ([9273]) mdworker(9273) deny mach-lookup com.apple.ls.boxd
    5/24/13 4:17:13.223 PM sandboxd[9288]: ([9272]) mdworker(9272) deny mach-lookup com.apple.ls.boxd
    5/24/13 4:17:20.000 PM kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
    5/24/13 4:17:37.000 PM kernel[0]: macx_swapoff SUCCESS
    5/24/13 4:18:08.000 PM kernel[0]: (default pager): [KERNEL]: default_pager_backing_store_monitor - send LO_WAT_ALERT
    5/24/13 4:18:22.000 PM kernel[0]: macx_swapoff SUCCESS
    5/24/13 4:18:29.218 PM mds[34]: (Normal) ImportServer: Preparing for software update
    5/24/13 4:18:30.483 PM mds[34]: (Normal) ImportServer: Software update complete
    5/24/13 4:18:35.116 PM reboot[9323]: rebooted by _usbmuxd
    5/24/13 4:18:35.116 PM reboot[9323]: BOOT_TIME: 1369426715 116379
    5/24/13 4:20:15.000 PM bootlog[0]: BOOT_TIME 1369426815 0
    5/24/13 4:20:43.000 PM kernel[0]: PMAP: PCID enabled
    5/24/13 4:20:43.000 PM kernel[0]: Darwin Kernel Version 12.3.0: Sun Jan  6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
    5/24/13 4:20:43.000 PM kernel[0]: vm_page_bootstrap: 3924376 free pages and 237160 wired pages
    5/24/13 4:20:43.000 PM kernel[0]: kext submap [0xffffff7f80735000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000735000]
    5/24/13 4:20:43.000 PM kernel[0]: zone leak detection enabled
    5/24/13 4:20:43.000 PM kernel[0]: standard timeslicing quantum is 10000 us
    5/24/13 4:20:43.000 PM kernel[0]: standard background quantum is 2500 us
    5/24/13 4:20:43.000 PM kernel[0]: mig_table_max_displ = 74
    5/24/13 4:20:43.000 PM kernel[0]: TSC Deadline Timer supported and enabled
    5/24/13 4:20:43.000 PM kernel[0]: corecrypto kext started!
    5/24/13 4:20:43.000 PM kernel[0]: Running kernel space in FIPS MODE
    5/24/13 4:20:43.000 PM kernel[0]: Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    5/24/13 4:20:43.000 PM kernel[0]: Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
    5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS integrity POST test passed!
    5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS AES CBC POST test passed!
    5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS TDES CBC POST test passed!
    5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS AES ECB AESNI POST test passed!
    5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS AES XTS AESNI POST test passed!
    5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS SHA POST test passed!
    5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS HMAC POST test passed!
    5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS ECDSA POST test passed!
    5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS DRBG POST test passed!
    5/24/13 4:20:43.000 PM kernel[0]: corecrypto.kext FIPS POST passed!
    5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
    5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
    5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
    5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
    5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
    5/24/13 4:20:43.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
    5/24/13 4:20:43.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
    5/24/13 4:20:16.975 PM com.apple.launchd[1]: *** launchd[1] has started up. ***
    5/24/13 4:20:43.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    5/24/13 4:20:43.000 PM kernel[0]: calling mpo_policy_init for Sandbox
    5/24/13 4:20:43.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    5/24/13 4:20:43.000 PM kernel[0]: calling mpo_policy_init for Quarantine
    5/24/13 4:20:43.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    5/24/13 4:20:43.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    5/24/13 4:20:43.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
    5/24/13 4:20:43.000 PM kernel[0]: MAC Framework successfully initialized
    5/24/13 4:20:43.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    5/24/13 4:20:43.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
    5/24/13 4:20:43.000 PM kernel[0]: ACPI: System State [S0 S3 S4 S5]
    5/24/13 4:20:43.000 PM kernel[0]: PFM64 (36 cpu) 0xf80000000, 0x80000000
    5/24/13 4:20:43.000 PM kernel[0]: [ PCI configuration begin ]
    5/24/13 4:20:43.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0057
    5/24/13 4:20:43.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 13:47:00 Aug 14 2012) initialization complete
    5/24/13 4:20:16.975 PM com.apple.launchd[1]: *** Shutdown logging is enabled. ***
    5/24/13 4:20:43.000 PM kernel[0]: console relocated to 0xfd0010000
    5/24/13 4:20:43.000 PM kernel[0]: PCI configuration changed (bridge=72 device=10 cardbus=0)
    5/24/13 4:20:43.000 PM kernel[0]: [ PCI configuration end, bridges 22 devices 23 ]
    5/24/13 4:20:29.388 PM com.apple.launchd[1]: (com.apple.automountd) Unknown key for boolean: NSSupportsSuddenTermination
    5/24/13 4:20:43.000 PM kernel[0]: FireWire runtime power conservation disabled. (2)
    5/24/13 4:20:43.000 PM kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
    5/24/13 4:20:43.000 PM kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    5/24/13 4:20:43.000 PM kernel[0]: rooting via boot-uuid from /chosen: 674D14D9-4E9E-3C3C-836E-C2B76F083714
    5/24/13 4:20:43.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    5/24/13 4:20:43.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    5/24/13 4:20:43.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    5/24/13 4:20:43.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    5/24/13 4:20:43.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    5/24/13 4:20:43.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
    5/24/13 4:20:43.000 PM kernel[0]: BTCOEXIST off
    5/24/13 4:20:43.000 PM kernel[0]: BRCM tunables:
    5/24/13 4:20:43.000 PM kernel[0]: pullmode[1] txringsize[  256] txsendqsize[1024] reapmin[   32] reapcount[  128]
    5/24/13 4:20:43.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/TOSHIBA MK5065GSXF Media/IOGUIDPartitionScheme/Customer@2
    5/24/13 4:20:43.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 2
    5/24/13 4:20:43.000 PM kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 406c8ffffe7cbff0; max speed s800.
    5/24/13 4:20:43.000 PM kernel[0]: FireWire (OHCI) Lucent ID 5901 PCI now active, GUID 000a270200434c07; max speed s800.
    5/24/13 4:20:43.000 PM kernel[0]: Kernel is LP64
    5/24/13 4:20:43.000 PM kernel[0]: USBMSC Identifier (non-unique): 57442D574341554830323532353836 0x1058 0x1100 0x175
    5/24/13 4:20:43.000 PM kernel[0]: macx_swapon SUCCESS
    5/24/13 4:20:36.673 PM hidd[42]: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
    5/24/13 4:20:36.675 PM hidd[42]: void __IOHIDLoadBundles(): Loaded 0 HID plugins
    5/24/13 4:20:43.215 PM distnoted[58]: Bug: 12D78: liblaunch.dylib + 23849 [2F71CAF8-6524-329E-AC56-C506658B4C0C]: 0x25
    5/24/13 4:20:44.812 PM mDNSResponder[35]: mDNSResponder mDNSResponder-379.37 (Dec 16 2012 19:43:09) starting OSXVers 12
    5/24/13 4:20:44.825 PM coreservicesd[59]: FindBestLSSession(), no match for inSessionID 0xfffffffffffffffc auditTokenInfo( uid=0 euid=0 auSessionID=100000 create=false
    5/24/13 4:20:44.837 PM appleeventsd[48]: main: Starting up
    5/24/13 4:20:44.000 PM kernel[0]: Waiting for DSMOS...
    5/24/13 4:20:44.000 PM kernel[0]: BCM5701Enet: Ethernet address 40:6c:8f:27:e1:64
    5/24/13 4:20:44.000 PM kernel[0]: BCM5701Enet: Ethernet address 40:6c:8f:0c:63:a3
    5/24/13 4:20:44.000 PM kernel[0]: AirPort_Brcm4331: Ethernet address 70:73:cb:c4:c3:99
    5/24/13 4:20:44.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    5/24/13 4:20:44.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished(): 
    5/24/13 4:20:46.000 PM kernel[0]: Previous Shutdown Cause: 5
    5/24/13 4:20:46.000 PM kernel[0]: IOBluetoothUSBDFU::probe
    5/24/13 4:20:46.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8281 FirmwareVersion - 0x0100
    5/24/13 4:20:46.000 PM kernel[0]: [BroadcomBluetoothHCIControllerUSBTransport][start] -- completed
    5/24/13 4:20:46.229 PM com.apple.kextd[12]: Can't load /System/Library/Extensions/SeratoScratchDriver.kext - no code for running kernel's architecture.
    5/24/13 4:20:46.232 PM com.apple.kextd[12]: Load com.serato.usb.kext failed; removing personalities from kernel.
    5/24/13 4:20:46.270 PM com.apple.kextd[12]: Can't load /System/Library/Extensions/SeratoScratchDriver.kext - no code for running kernel's architecture.
    5/24/13 4:20:46.271 PM com.apple.kextd[12]: Load com.serato.usb.kext failed; removing personalities from kernel.
    5/24/13 4:20:46.000 PM kernel[0]: DSMOS has arrived
    5/24/13 4:20:46.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothHCIControllerTransportShowsUp] -- Received Bluetooth Controller register service notification
    5/24/13 4:20:46.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
    5/24/13 4:20:46.000 PM kernel[0]: AMDTurksGraphicsAccelerator: ** Device in slot: SLOT--1 **
    5/24/13 4:20:46.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    5/24/13 4:20:47.416 PM com.apple.SecurityServer[25]: Session 100000 created
    5/24/13 4:20:48.279 PM configd[50]: setting hostname to "Jacquelines-Mac-mini.local"
    5/24/13 4:20:48.000 PM kernel[0]: AirPort: Link Down on en1. Reason 1 (Unspecified).
    5/24/13 4:20:48.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    5/24/13 4:20:48.284 PM configd[50]: network changed.
    5/24/13 4:20:48.297 PM airportd[81]: _processDLILEvent: en1 attached (up)
    5/24/13 4:20:48.000 PM kernel[0]: createVirtIf(): ifRole = 1
    5/24/13 4:20:48.000 PM kernel[0]: in func createVirtualInterface ifRole = 1
    5/24/13 4:20:48.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1 this 0xffffff80448bf400
    5/24/13 4:20:48.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init() <p2p> role 1
    5/24/13 4:20:48.000 PM kernel[0]: Created virtif 0xffffff80448bf400 p2p0
    5/24/13 4:20:49.673 PM mds[34]: (Normal) FMW: FMW 0 0
    5/24/13 4:20:49.725 PM blued[52]: Read the UHE Info
    5/24/13 4:20:49.725 PM blued[52]: Read version 2 info.  Number of devices:3
    5/24/13 4:20:49.725 PM blued[52]: Class of device:     0x2580
    5/24/13 4:20:49.725 PM blued[52]: Device name: 'Jacqueline's mouse' length:19
    5/24/13 4:20:49.725 PM blued[52]: Finished reading the HID data
    5/24/13 4:20:49.726 PM blued[52]: Found a device with PID:0x030d VID:0x05ac
    5/24/13 4:20:49.726 PM blued[52]: Class of device:     0x2540
    5/24/13 4:20:49.727 PM blued[52]: Device name: 'Jacqueline's Keyboard' length:22
    5/24/13 4:20:49.727 PM blued[52]: Finished reading the HID data
    5/24/13 4:20:49.727 PM blued[52]: Found a device with PID:0x0255 VID:0x05ac
    5/24/13 4:20:49.727 PM blued[52]: Class of device:     0x2594
    5/24/13 4:20:49.727 PM blued[52]: Device name: 'Jacqueline's trackpad' length:22
    5/24/13 4:20:49.727 PM blued[52]: Finished reading the HID data
    5/24/13 4:20:49.727 PM blued[52]: Found a device with PID:0x030e VID:0x05ac
    5/24/13 4:20:56.741 PM com.apple.SecurityServer[25]: Entering service
    5/24/13 4:20:56.775 PM systemkeychain[71]: done file: /var/run/systemkeychaincheck.done
    5/24/13 4:20:56.794 PM configd[50]: network changed: DNS*
    5/24/13 4:20:56.795 PM mDNSResponder[35]: D2D_IPC: Loaded
    5/24/13 4:20:56.795 PM mDNSResponder[35]: D2DInitialize succeeded
    5/24/13 4:20:56.828 PM loginwindow[38]: Login Window Application Started
    5/24/13 4:20:56.874 PM WindowServer[93]: Server is starting up
    5/24/13 4:20:56.878 PM WindowServer[93]: Session 256 retained (2 references)
    5/24/13 4:20:56.878 PM WindowServer[93]: Session 256 released (1 references)
    5/24/13 4:20:56.889 PM awacsd[53]: Starting awacsd connectivity-78.2 (Dec 16 2012 19:43:29)
    5/24/13 4:20:56.893 PM awacsd[53]: InnerStore CopyAllZones: no info in Dynamic Store
    5/24/13 4:20:56.898 PM WindowServer[93]: Session 256 retained (2 references)
    5/24/13 4:20:56.902 PM WindowServer[93]: init_page_flip: page flip mode is on
    5/24/13 4:20:56.941 PM UserEventAgent[11]: Captive: [HandleNetworkInformationChanged:2435] nwi_state_copy returned NULL
    5/24/13 4:20:56.993 PM netbiosd[80]: Unable to start NetBIOS name service:
    5/24/13 4:20:57.322 PM WindowServer[93]: mux_initialize: Couldn't find any matches
    5/24/13 4:20:57.334 PM WindowServer[93]: GLCompositor enabled for tile size [256 x 256]
    5/24/13 4:20:57.334 PM WindowServer[93]: CGXGLInitMipMap: mip map mode is on
    5/24/13 4:20:57.358 PM WindowServer[93]: WSMachineUsesNewStyleMirroring: false
    5/24/13 4:20:57.358 PM WindowServer[93]: MPServiceForDisplayDevice: Invalid device alias (0)
    5/24/13 4:20:57.358 PM WindowServer[93]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    5/24/13 4:20:57.358 PM WindowServer[93]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    5/24/13 4:20:57.359 PM WindowServer[93]: Display 0x04248b01: GL mask 0x2; bounds (0, 0)[2560 x 1440], 42 modes available
    Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162a02c3, Unit 1, Rotation 0
    UUID 0x0000061000009227162a02c300000000
    5/24/13 4:20:57.359 PM WindowServer[93]: Display 0x003f003c: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
    off-line, enabled, boot, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003c
    5/24/13 4:20:57.359 PM WindowServer[93]: Created shield window 0x5 for display 0x003f003f
    5/24/13 4:20:57.359 PM WindowServer[93]: Created shield window 0x6 for display 0x003f003e
    5/24/13 4:20:57.365 PM WindowServer[93]: Created shield window 0x7 for display 0x04248b01
    5/24/13 4:20:57.366 PM WindowServer[93]: Created shield window 0x8 for display 0x003f003c
    5/24/13 4:20:57.367 PM WindowServer[93]: Display 0x04248b01: GL mask 0x2; bounds (0, 0)[2560 x 1440], 42 modes available
    Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162a02c3, Unit 1, Rotation 0
    UUID 0x0000061000009227162a02c300000000
    5/24/13 4:20:57.367 PM WindowServer[93]: Display 0x003f003f: GL mask 0x8; bounds (3584, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003f
    5/24/13 4:20:57.367 PM WindowServer[93]: Display 0x003f003e: GL mask 0x4; bounds (3585, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003e
    5/24/13 4:20:57.367 PM WindowServer[93]: Display 0x003f003c: GL mask 0x1; bounds (3586, 0)[1 x 1], 1 modes available
    off-line, enabled, boot, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
    UUID 0xffffffffffffffffffffffff003f003c
    5/24/13 4:20:57.367 PM WindowServer[93]: CGXPerformInitialDisplayConfiguration
    5/24/13 4:20:57.367 PM WindowServer[93]:   Display 0x04248b01: MappedDisplay Unit 1; Vendor 0x610 Model 0x9227 S/N 371851971 Dimensions 23.50 x 13.23; online enabled, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
    5/24/13 4:20:57.367 PM WindowServer[93]:   Display 0x003f003f: MappedDisplay Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
    5/24/13 4:20:57.367 PM WindowServer[93]:   Display 0x003f003e: MappedDisplay Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
    5/24/13 4:20:57.368 PM WindowServer[93]:   Display 0x003f003c: MappedDisplay Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
    5/24/13 4:20:57.392 PM WindowServer[93]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x0000000f, accelerator 0x0000334f, unit 0, caps QEX|QGL|MIPMAP, vram 256 MB
    5/24/13 4:20:57.393 PM WindowServer[93]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x0000000f, texture units 8, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    5/24/13 4:20:57.396 PM loginwindow[38]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    5/24/13 4:20:57.397 PM launchctl[97]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    5/24/13 4:20:57.000 PM kernel[0]: en1: 802.11d country code set to 'US'.
    5/24/13 4:20:57.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
    5/24/13 4:20:57.000 PM kernel[0]: MacAuthEvent en1   Auth result for: 28:37:37:48:08:f1  MAC AUTH succeeded
    5/24/13 4:20:57.000 PM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
    5/24/13 4:20:57.000 PM kernel[0]: AirPort: Link Up on en1
    5/24/13 4:20:57.000 PM kernel[0]: en1: BSSID changed to 28:37:37:48:08:f1
    5/24/13 4:20:57.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
    5/24/13 4:20:58.000 PM kernel[0]: AirPort: RSN handshake complete on en1
    5/24/13 4:20:58.525 PM digest-service[104]: label: default
    5/24/13 4:20:58.525 PM digest-service[104]: dbname: od:/Local/Default
    5/24/13 4:20:58.525 PM digest-service[104]: mkey_file: /var/db/krb5kdc/m-key
    5/24/13 4:20:58.525 PM digest-service[104]: acl_file: /var/db/krb5kdc/kadmind.acl
    5/24/13 4:20:58.527 PM digest-service[104]: digest-request: uid=0
    5/24/13 4:20:58.549 PM rpcsvchost[106]: sandbox_init: com.apple.msrpc.netlogon.sb succeeded
    5/24/13 4:20:58.553 PM digest-service[104]: digest-request: init request
    5/24/13 4:20:58.556 PM digest-service[104]: digest-request: init return domain: BUILTIN server: JACQUELINES-MAC-MINI
    5/24/13 4:20:58.827 PM com.apple.usbmuxd[19]: usbmuxd-296.4 on Dec 21 2012 at 16:11:14, running 64 bit
    5/24/13 4:20:59.366 PM WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    5/24/13 4:21:00.046 PM locationd[39]: NOTICE,Location icon should now be in state 0
    5/24/13 4:21:00.396 PM WindowServer[93]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x04248b01 device: 0x10ed76a10  isBackBuffered: 1 numComp: 3 numDisp: 3
    5/24/13 4:21:07.824 PM airportd[81]: _doAutoJoin: Already associated to “[REDACTED]”. Bailing on auto-join.
    5/24/13 4:21:07.848 PM airportd[81]: _doAutoJoin: Already associated to “[REDACTED]”. Bailing on auto-join.
    5/24/13 4:21:11.000 PM kernel[0]: [BNBMouseDevice::init][75.19] init is complete
    5/24/13 4:21:11.896 PM awacsd[53]: Exiting
    5/24/13 4:21:12.000 PM kernel[0]: [BNBMouseDevice::handleStart][75.19] returning 1
    5/24/13 4:21:12.000 PM kernel[0]: [AppleMultitouchHIDEventDriver::start] entered
    5/24/13 4:21:12.000 PM kernel[0]: [AppleMultitouchDevice::start] entered
    5/24/13 4:21:16.000 PM kernel[0]: AmbrosiaAudioSupport: newUserClient connection attempt.
    5/24/13 4:21:21.000 PM kernel[0]: [AppleBluetoothHIDKeyboard][waitForHandshake][28-37-37-35-c5-f5] Timeout waiting for handshake
    5/24/13 4:21:21.000 PM kernel[0]: [AppleBluetoothHIDKeyboard][interruptChannelOpeningWL] final device setup failed
    5/24/13 4:21:21.000 PM kernel[0]: [AppleBluetoothHIDKeyboard][interruptChannelOpeningWL] Forcing closeDownServices
    5/24/13 4:21:21.000 PM kernel[0]: [AppleBluetoothHIDKeyboard][sendData][28-37-37-35-c5-f5] commandSleep in sendData returned an error
    5/24/13 4:21:23.924 PM configd[50]: subnet_route: write routing socket failed, Network is unreachable
    5/24/13 4:21:25.534 PM configd[50]: network changed: v4(en1+:XXX.XXX.XXX.XXX) DNS* Proxy+ SMB
    5/24/13 4:21:28.096 PM UserEventAgent[11]: Captive: en1: Not probing '[REDACTED]' (protected network)
    5/24/13 4:21:28.099 PM configd[50]: network changed: v4(en1:XXX.XXX.XXX.XXX) DNS Proxy SMB
    5/24/13 4:21:30.730 PM _cvmsroot[124]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
    5/24/13 4:21:31.000 PM kernel[0]: [AppleBluetoothHIDKeyboard][sendData][28-37-37-35-c5-f5] Became inactive while sending data
    5/24/13 4:21:31.000 PM kernel[0]: [AppleBluetoothHIDKeyboard][setReportWL][28-37-37-35-c5-f5] Could not send DATA command via interrupt channel - 0xE00002D7
    5/24/13 4:21:33.578 PM _cvmsroot[128]: Unable to resolve hostname(s)
    5/24/13 4:21:33.765 PM ntpd[102]: proto: precision = 1.000 usec
    5/24/13 4:21:34.179 PM WindowServer[93]: Created shield window 0x9 for display 0x04248b01
    5/24/13 4:21:34.179 PM WindowServer[93]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    5/24/13 4:21:34.201 PM WindowServer[93]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    5/24/13 4:21:34.863 PM WindowServer[93]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    5/24/13 4:21:34.868 PM launchctl[131]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    5/24/13 4:21:34.886 PM launchctl[131]: com.apple.findmymacmessenger: Already loaded
    5/24/13 4:21:34.914 PM com.apple.SecurityServer[25]: Session 100003 created
    5/24/13 4:21:35.196 PM airportd[81]: _doAutoJoin: Already associated to “SkyNet”. Bailing on auto-join.
    5/24/13 4:21:35.626 PM loginwindow[38]: Login Window Started Security Agent
    5/24/13 4:21:35.774 PM SecurityAgent[141]: This is the first run
    5/24/13 4:21:35.775 PM SecurityAgent[141]: MacBuddy was run = 0
    5/24/13 4:21:36.144 PM launchctl[148]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    5/24/13 4:21:36.487 PM TabletDriver[137]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app
    5/24/13 4:21:36.607 PM TabletDriver[137]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/TabletDriver.app
    5/24/13 4:21:36.687 PM locationd[156]: NOTICE,Location icon should now be in state 0
    5/24/13 4:21:36.691 PM UserEventAgent[132]: cannot find useragent 1102
    5/24/13 4:21:39.137 PM timezoned[160]: bootstrap_look_up failed (44e)
    5/24/13 4:21:39.342 PM timezoned[160]: bootstrap_look_up failed (44e)
    5/24/13 4:21:42.000 PM kernel[0]: [SendHCIRequestFormatted] ### ERROR: [0x0406] (Disconnect) -- Send request failed (err = 0x0010 (kBluetoothHCIErrorHostTimeout))
    5/24/13 4:21:42.000 PM kernel[0]: ### ERROR: send request failed (err=0x0010 (kBluetoothHCIErrorHostTimeout))
    5/24/13 4:21:44.107 PM configd[50]: network changed: v4(en1!:10.0.1.39) DNS+ Proxy SMB
    5/24/13 4:21:44.120 PM UserEventAgent[11]: Captive: en1: Not probing '[REDACTED]' (protected network)
    5/24/13 4:21:45.696 PM com.apple.launchd[1]: (com.apple.xprotectupdater[17]) Exited with code: 252
    5/24/13 4:22:15.683 PM launchctl[164]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    5/24/13 4:22:15.794 PM distnoted[166]: # distnote server agent  absolute time: 121.114577396   civil time: Fri May 24 16:22:15 2013   pid: 166 uid: 502  root: no
    5/24/13 4:22:34.512 PM launchctl[173]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    5/24/13 4:22:37.019 PM com.apple.SecurityServer[25]: Session 100005 created
    5/24/13 4:22:37.064 PM com.apple.SecurityServer[25]: Session 100006 created
    5/24/13 4:22:44.199 PM BezelServices 236.3[38]: -[DriverServices sendPreferencesToDevice:resetDefaults:] error: classPrefID (null), classPrefs (null)
    5/24/13 4:22:48.261 PM mdworker32[170]: CGSGetDisplayBounds: Invalid display 0x00000000
    5/24/13 4:22:49.134 PM mdworker32[170]: bootstrap_look_up2 failed with 0x44c
    5/24/13 4:22:49.000 PM kernel[0]: Sandbox: sandboxd(178) deny mach-lookup com.apple.coresymbolicationd
    5/24/13 4:22:49.731 PM SecurityAgent[141]: User info context values set for [COMPUTERNAME]
    5/24/13 4:22:50.910 PM SecurityAgent[141]: Login Window login proceeding
    5/24/13 4:22:51.272 PM loginwindow[38]: Login Window - Returned from Security Agent
    5/24/13 4:22:51.310 PM loginwindow[38]: ERROR | ScreensharingLoginNotification | Failed sending message to screen sharing GetScreensharingPort, err: 1102
    5/24/13 4:22:51.328 PM loginwindow[38]: USER_PROCESS: 38 console
    5/24/13 4:22:51.472 PM airportd[180]: _doAutoJoin: Already associated to “[REDACTED]”. Bailing on auto-join.
    5/24/13 4:22:51.586 PM com.apple.launchd[1]: ([0x0-0x6006].com.wacom.Consumer_TouchDriver[147]) Exited with code: 255
    5/24/13 4:22:51.588 PM coreservicesd[59]: SendFlattenedData, got error #268435459 (ipc/send) invalid destination port from ::mach_msg(), sending notification kLSNotifyApplicationDeath to notificationID=107
    5/24/13 4:22:51.590 PM com.apple.launchd[1]: (com.wacom.pentablet[137]) Exited with code: 255
    5/24/13 4:22:51.624 PM launchctl[181]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    5/24/13 4:22:51.640 PM com.apple.launchd.peruser.502[163]: (com.apple.gamed) Ignored this key: UserName
    5/24/13 4:22:51.640 PM com.apple.launchd.peruser.502[163]: (com.apple.gamed) Ignored this key: GroupName
    5/24/13 4:22:51.640 PM com.apple.launchd.peruser.502[163]: (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
    5/24/13 4:22:51.645 PM loginwindow[38]: Connection with distnoted server was invalidated
    5/24/13 4:22:52.074 PM WindowServer[93]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'.
    5/24/13 4:22:52.486 PM WindowServer[93]: Display 0x04248b01: MappedDisplay Unit 1; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    5/24/13 4:22:52.603 PM blued[52]: kBTXPCUpdateUserPreferences gConsoleUserUID = 502
    5/24/13 4:22:52.895 PM com.apple.launchd.peruser.502[163]: (com.apple.afpstat-qfa[213]) Exited with code: 2
    5/24/13 4:22:52.959 PM launchctl[201]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    5/24/13 4:22:54.150 PM WindowServer[93]: CGXDisableUpdate: UI updates were forcibly disabled by application "SystemUIServer" for over 1.00 seconds. Server has re-enabled them.
    5/24/13 4:22:54.210 PM WindowServer[93]: reenable_update_for_connection: UI updates were finally reenabled by application "SystemUIServer" after 1.06 seconds (server forcibly re-enabled them after 1.00 seconds)
    5/24/13 4:22:55.096 PM com.apple.launchd.peruser.502[163]: (com.apple.mrt.uiagent[203]) Exited with code: 255
    5/24/13 4:22:55.108 PM NetworkBrowserAgent[235]: Starting NetworkBrowserAgent
    5/24/13 4:22:55.441 PM PenTabletDriver[214]: Could not find image named 'DKTouchRingToggleLeft'.
    5/24/13 4:22:55.443 PM PenTabletDriver[214]: Could not find image named 'DKTouchRingToggleRight'.
    5/24/13 4:22:55.460 PM 1PasswordAgent[215]: Starting 1PasswordAgent 3.8.21 #32009 built Apr 24 2013 16:09:31
    5/24/13 4:22:55.677 PM 1PasswordAgent[215]: Trying to load Localizable.strings [English] from the main bundle
    5/24/13 4:22:55.857 PM 1PasswordAgent[215]: Cannot find English version, using English localization for Localizable.strings
    5/24/13 4:22:57.107 PM 1PasswordAgent[215]: reloadAllObjects
    5/24/13 4:22:58.073 PM 1PasswordAgent[215]: Database (AGHtmlDatabase:file://localhost/Users/Winter/Dropbox/1PasswordSync/1Password.a gilekeychain/) load time [Cache]: 0.959+0.006 (2296 objects)
    5/24/13 4:23:00.049 PM ConsumerTouchDriver[241]: Could not find image named 'TouchRingToggleLEDSlitOff'.
    5/24/13 4:23:00.060 PM ConsumerTouchDriver[241]: Could not find image named 'DKTouchRingToggleLeft'.
    5/24/13 4:23:00.067 PM ConsumerTouchDriver[241]: Could not find image named 'DKTouchRingToggleRight'.
    5/24/13 4:23:00.890 PM apsd[219]: Unable to bootstrap_lookup connection port for 'com.apple.ubd.system-push': Unknown service name
    5/24/13 4:23:01.720 PM TabletDriver[214]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/ConsumerTouchDriver.app
    5/24/13 4:23:02.398 PM coreservicesd[59]: SendFlattenedData, got error #268435460 (ipc/send) timed out from ::mach_msg(), sending notification kLSNotifyChildApplicationLaunch to notificationID=140
    5/24/13 4:23:03.753 PM TabletDriver[214]: Finish launching /Library/Application Support/Tablet/PenTabletDriver.app/Contents/Resources/TabletDriver.app
    5/24/13 4:23:10.413 PM 1PasswordAgent[215]: GrowlApplicationBridgeRegistrationAttempt: Could not send open-document event to register this application with Growl because AESend returned -600/no eligible process with specified descriptor
    5/24/13 4:23:10.413 PM 1PasswordAgent[215]: Failed all attempts at registering
    5/24/13 4:23:11.507 PM CoreServicesUIAgent[256]: Error: qtn_file_apply_to_path error: Permission denied
    5/24/13 4:23:16.700 PM storeagent[252]: CKSoftwareMap: waitUntilMapIsLoadedAndPerformBlock:onDispatchQueue: timed out waiting for mdSemaphore
    5/24/13 4:23:24.378 PM com.apple.dock.extra[298]: Could not load bundle for Dock Extra key DockTile.docktileplugin
    5/24/13 4:23:24.379 PM Dock[190]: Failed to set up extra plugin. file://localhost/Applications/Calendar%20Plus.app/ Failed to get plugin class.
    5/24/13 4:23:25.000 PM kernel[0]: Sandbox: sandboxd(311) deny mach-lookup com.apple.coresymbolicationd
    5/24/13 4:23:26.097 PM launchctl[317]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    5/24/13 4:23:26.791 PM quicklookd[282]: [QL] Can't get plugin bundle info at XTUM/ -- file://localhost/private/tmp/
    5/24/13 4:23:27.006 PM Delibar[251]: CoreAnimation: warning, deleted thread with uncommitted CATransaction; set CA_DEBUG_TRANSACTIONS=1 in environment to log backtraces.
    5/24/13 4:23:27.851 PM mdworker[171]: Unable to talk to lsboxd
    5/24/13 4:23:29.000 PM kernel[0]: fsevents: watcher dbfseventsd (pid: 322) - Using /dev/fsevents directly is unsupported.  Migrate to FSEventsFramework
    5/24/13 4:23:29.433 PM mdworker[174]: Unable to talk to lsboxd
    5/24/13 4:23:36.028 PM Finder[192]: [QL] Can't get plugin bundle info at XTUM/ -- file://localhost/
    5/24/13 4:23:38.110 PM MenuTab Pro for Facebook[347]: objc[347]: Class HandCursorButton is implemented in both /Applications/MenuTab Pro for Facebook.app/Contents/Frameworks/FIPLABNewsletter.framework/Versions/A/FIPLABNe wsletter and /Applications/MenuTab Pro for Facebook.app/Contents/MacOS/MenuTab Pro for Facebook. One of the two will be used. Which one is undefined.
    5/24/13 4:23:38.124 PM Tab for Google+ Pro[346]: objc[346]: Class HandCursorButton is implemented in both /Applications/Tab for Google+ Pro.app/Contents/Frameworks/FIPLABNewsletter.framework/Versions/A/FIPLABNewslet ter and /Applications/Tab for Google+ Pro.app/Contents/MacOS/Tab for Google+ Pro. One of the two will be used. Which one is undefined.
    5/24/13 4:23:38.486 PM com.apple.SecurityServer[25]: Session 100012 created
    5/24/13 4:23:39.707 PM Pin Pro for Pinterest[348]: objc[348]: Class HandCursorButton is implemented in both /Applications/Pin Pro for Pinterest.app/Contents/Frameworks/FIPLABNewsletter.framework/Versions/A/FIPLABN ewsletter and /Applications/Pin Pro for Pinterest.app/Contents/MacOS/Pin Pro for Pinterest. One of the two will be used. Which one is undefined.
    5/24/13 4:23:46.417 PM Mint QuickView[344]: Could not find image named 'accounts'.
    5/24/13 4:23:47.947 PM usernoted[197]: Connection does not have the proper entitlement (com.apple.developer.notificationcenter-identifiers) to connect on behalf of com.apple.sociald.twitterservice.Twitter. All communication will be denied.
    5/24/13 4:23:49.075 PM librariand[342]: MMe quota status changed: under quota
    5/24/13 4:24:06.102 PM Alfred 2[264]: [TIMER] 59.030677 seconds to initialise Alfred
    5/24/13 4:24:20.647 PM WindowServer[93]: CGXDisableUpdate: UI updates were forcibly disabled by application "Alfred 2" for over 1.00 seconds. Server has re-enabled them.
    5/24/13 4:24:20.781 PM WindowServer[93]: reenable_update_for_connection: UI updates were finally reenabled by application "Alfred 2" after 1.15 seconds (server forcibly re-enabled them after 1.00 seconds)
    5/24/13 4:24:32.998 PM prl_naptd[431]: Starting Parallels Network Daemon (proxy_mode)
    5/24/13 4:24:33.282 PM Parallels[451]: Set 'root:wheel' as owners for /Applications/Parallels Desktop.app/Contents//Library/Extensions/10.6
    5/24/13 4:24:33.591 PM Parallels[460]: Starting Parallels Dispatcher Service
    5/24/13 4:24:33.597 PM Parallels[464]: Parallels Dispatcher Service sucessfully started
    5/24/13 4:24:33.664 PM Parallels[467]: Loading kernel extension prl_usb_connect.kext
    5/24/13 4:24:35.496 PM Parallels[473]: Loading kernel extension prl_hypervisor.kext
    5/24/13 4:24:39.025 PM Parallels[482]: Loading kernel extension prl_hid_hook.kext
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypVtx.c:186   CPU is Intel
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypLowCache.c:201   Low cache initialized (0 kB for 0 VMs on 16384 MB)
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypApic.c:253   Host APIC base_msr 0xFEE00800 ver 0x15
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypVtd.c:3975   [vtdInit]
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ MacACPI.cpp:40   ACPI table DMAR is not found
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypAcpi.c:160   map: addr = 0xf0e0, size = 1024
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypAcpi.c:111   [acpiScanForRsdp] RSDP NOT found!
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypAcpi.c:111   [acpiScanForRsdp] RSDP NOT found!
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypAcpi.c:213   [acpiFindRootTablePointer] Can't find RSDP!
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypAcpi.c:309   [_acpiFindTableBySig] Not found root table!
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypVtd.c:3720   [vtdProcessDmarTable] Can't find DMAR table!
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypVtd.c:4014   [vtdInit] No VT-d hardware
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypSMBios.c:54   Failed to find SMBios entry point
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypModule.c:174   Parallels IPI vector 0x47 shared 0
    5/24/13 4:24:39.000 PM kernel[0]: /drv/ HypModule.c:185   Parallels Hypervisor 8.0.18483.860857 loaded.
    5/24/13 4:24:39.402 PM Parallels[488]: Loading kernel extension prl_netbridge.kext
    5/24/13 4:24:39.000 PM kernel[0]: /prl_hid/ Parallels HID Helper started.
    5/24/13 4:24:39.905 PM Parallels[494]: Loading kernel extension prl_vnic.kext
    5/24/13 4:24:40.000 PM kernel[0]: com.parallels.kext.prlnet 8.0.18483.860857 has started.
    5/24/13 4:24:40.666 PM Parallels[499]: Trying to load kernel extensions, exit status: 0
    5/24/13 4:24:40.000 PM kernel[0]: com.parallels.kext.vnic 8.0.18483.860857 has started.
    5/24/13 4:24:40.672 PM Parallels[502]: Starting Parallels networking...
    5/24/13 4:24:41.000 PM kernel[0]: com_parallels_kext_prl_vnic: created vnic0
    5/24/13 4:24:41.000 PM kernel[0]: com_parallels_kext_prl_vnic: created vnic1
    5/24/13 4:24:41.501 PM Parallels[509]: Parallels networking sucessfully started
    5/24/13 4:24:41.512 PM Parallels[511]: Restarting CiscoVPN
    5/24/13 4:24:41.565 PM SystemStarter[513]: Unknown service: CiscoVPN
    5/24/13 4:24:41.648 PM watchdog[525]: Start watching /Applications/Parallels Desktop.app/Contents//MacOS/prl_naptd (limit is 20)
    5/24/13 4:24:41.655 PM watchdog[531]: Start /Applications/Parallels Desktop.app/Contents//MacOS/prl_naptd start
    5/24/13 4:24:41.659 PM watchdog[533]: Child pid 532
    5/24/13 4:24:41.676 PM prl_naptd[532]: Starting Parallels Network Daemon
    5/24/13 4:24:41.758 PM prl_naptd[532]: vnic0: DHCP/NAT for XX.XXX.XX.1-10.XXX.XX.XXX netmask 255.255.255.0
    5/24/13 4:24:41.758 PM prl_naptd[532]: vnic1: DHCP for XX.XX.XXX.1-XX.XX.XXX.XXX netmask 255.255.255.0
    5/24/13 4:24:42.000 PM kernel[0]: vnic0: promiscuous mode enable failed
    5/24/13 4:24:42.000 PM kernel[0]: vnic1: promiscuous mode enable failed
    5/24/13 4:24:42.000 PM kernel[0]: /drv/ HypIoctls.c:608   Ioctl VT-d status: FFFFFFFD
    5/24/13 4:24:45.518 PM mDNSResponderHelper[536]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument
    5/24/13 4:24:45.518 PM mDNSResponderHelper[536]: do_mDNSInterfaceAdvtIoctl: ioctl call SIOCGIFINFO_IN6 failed - error (22) Invalid argument

    My apologies about the wall of text. After I made my original post, I thought maybe it would better to go back and put it in a pastebin instead. I was not able to edit that post once I sent it.
    In regards to your question, the  permissions on the
    /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist file is "read and write" for system, wheel and everyone.

  • [SOLVED] ACPI handler.sh no longer working (Thinkpad X60 Tablet)

    Hello there,
    I recently did a few updates on my system to reduce power usage and get hdaps working. For some reason one of these changes must have broken ACPID in some way so that what I wrote in handler.sh no longer has any effect when I e.g. press the configured buttons to lock my screen or shut down, but I have no clue which.
    I'm not really familiar with where ACPI and ACPID keeps all their logs either, and which parts in there might mean something for me. I don't even know how I can check if ACPI is running properly and just ACPID isn't, for instance (both are running thought, confirmed with ps -A).
    Here's what I can remember of what I did:
    -full system update
    -install cpufreq to redcude power usage with acpi_cpufreq
    -install HDAPS with Thinkpad driver, as described on the Wiki
    -tweak my laptop-mode settings, e.g. disable VGA output when in laptop mode
    -enable AHCI for my hard drive in kernel image and BIOS
    Would be great if you could help me troubleshoot this somehow, as I really don't have a clue on how to fix this. Here's some output that might be helpful for starters:
    cat /etc/acpi/handler.sh
    #!/bin/sh
    set $*
    case "$1" in
    button/power)
    #echo "PowerButton pressed!">/dev/tty5
    case "$2" in
    PWRF)
    #Power off
    shutdown -h now
    logger "ACPI action undefined: $2"
    esac
    ibm/hotkey)
    #echo "Display swiveled">/dev/tty5
    case "$2" in
    HKEY)
    case "$4" in
    00005009)
    #Swiveling down
    /bin/sh /etc/acpi/actions/swivel-down
    0000500a)
    #Swiveling up
    /bin/sh /etc/acpi/actions/swivel-up
    00001002)
    #Lock screen
    xscreensaver-command -lock
    #run_once xtrlock &
    00001004)
    #Standby button
    xscreensaver-command -lock ; s2ram
    00001005)
    #Network button
    /etc/rc.d/net-auto-wireless restart
    00001009)
    #Reboot
    shutdown -r now
    00007000)
    #WLan button switched
    /etc/rc.d/net-auto-wireless restart
    fi
    esac
    esac
    button/sleep)
    case "$2" in
    SLPB) echo -n mem >/sys/power/state ;;
    *) logger "ACPI action undefined: $2" ;;
    esac
    ac_adapter)
    case "$2" in
    AC)
    case "$4" in
    00000000)
    #laptop mode should take care of this alone!
    #/etc/rc.d/laptop-mode start
    00000001)
    #/etc/rc.d/laptop-mode stop
    esac
    *) logger "ACPI action undefined: $2" ;;
    esac
    battery)
    case "$2" in
    BAT0)
    case "$4" in
    00000000) #echo "offline" >/dev/tty5
    00000001) #echo "online" >/dev/tty5
    esac
    CPU0)
    *) logger "ACPI action undefined: $2" ;;
    esac
    button/lid)
    #echo "LID switched!">/dev/tty5
    case "$2" in
    LID)
    if [[ `cat /proc/acpi/button/lid/LID/state | awk '{print $2}'` = "closed" ]]
    then
    #run_once xtrlock &
    xscreensaver-command -lock
    fi
    esac
    logger "ACPI group/action undefined: $1 / $2"
    esac
    dmesg | grep acpi
    BIOS-e820: 000000007f6d0000 - 000000007f6df000 (ACPI data)
    BIOS-e820: 000000007f6df000 - 000000007f700000 (ACPI NVS)
    modified: 000000007f6d0000 - 000000007f6df000 (ACPI data)
    modified: 000000007f6df000 - 000000007f700000 (ACPI NVS)
    ACPI: RSDP 000f67c0 00024 (v02 LENOVO)
    ACPI: XSDT 7f6d11e8 0008C (v01 LENOVO TP-7J 00001140 LTP 00000000)
    ACPI: FACP 7f6d1300 000F4 (v03 LENOVO TP-7J 00001140 LNVO 00000001)
    ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
    ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
    ACPI: DSDT 7f6d1690 0D56F (v01 LENOVO TP-7J 00001140 MSFT 0100000E)
    ACPI: FACS 7f6f4000 00040
    ACPI: SSDT 7f6d14b4 001DC (v01 LENOVO TP-7J 00001140 MSFT 0100000E)
    ACPI: ECDT 7f6debff 00052 (v01 LENOVO TP-7J 00001140 LNVO 00000001)
    ACPI: TCPA 7f6dec51 00032 (v02 LENOVO TP-7J 00001140 LNVO 00000001)
    ACPI: APIC 7f6dec83 00068 (v01 LENOVO TP-7J 00001140 LNVO 00000001)
    ACPI: MCFG 7f6deceb 0003C (v01 LENOVO TP-7J 00001140 LNVO 00000001)
    ACPI: HPET 7f6ded27 00038 (v01 LENOVO TP-7J 00001140 LNVO 00000001)
    ACPI: SLIC 7f6dee62 00176 (v01 LENOVO TP-7J 00001140 LTP 00000000)
    ACPI: BOOT 7f6defd8 00028 (v01 LENOVO TP-7J 00001140 LTP 00000001)
    ACPI: SSDT 7f6f2603 0025F (v01 LENOVO TP-7J 00001140 INTL 20050513)
    ACPI: SSDT 7f6f2862 000A6 (v01 LENOVO TP-7J 00001140 INTL 20050513)
    ACPI: SSDT 7f6f2908 004F7 (v01 LENOVO TP-7J 00001140 INTL 20050513)
    ACPI: SSDT 7f6f2dff 001D8 (v01 LENOVO TP-7J 00001140 INTL 20050513)
    ACPI: Local APIC address 0xfee00000
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    ACPI: Core revision 20090903
    ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    ACPI: bus type pci registered
    ACPI: EC: EC description table is found, configuring boot EC
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    ACPI: Power Resource [PUBS] (on)
    ACPI: ACPI Dock Station Driver: 3 docks/bays found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
    PCI: Using ACPI for IRQ routing
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 11 devices
    ACPI: ACPI bus type pnp unregistered
    acpi device:01: registered as cooling_device0
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    ACPI: Lid Switch [LID]
    ACPI: Sleep Button [SLPB]
    ACPI: Power Button [PWRF]
    i915 0000:00:02.0: power state changed by ACPI to D0
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    ACPI: SSDT 7f6f1ccc 001FE (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
    ACPI: SSDT 7f6f1f4f 006B4 (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
    ACPI: SSDT 7f6f1c04 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
    ACPI: SSDT 7f6f1eca 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
    ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
    uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
    ACPI: Thermal Zone [THM0] (56 C)
    ACPI: Thermal Zone [THM1] (59 C)
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    thinkpad_acpi: ThinkPad ACPI Extras v0.23
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 7JET29WW (1.14 ), EC 7JHT13WW-1.04
    thinkpad_acpi: Lenovo ThinkPad X60 Tablet, model 6363WDK
    thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
    thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
    thinkpad_acpi: ACPI backlight control delay disabled
    thinkpad_acpi: radio switch found; radios are enabled
    thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
    thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
    thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
    Registered led device: tpacpi::thinklight
    Registered led device: tpacpi::power
    Registered led device: tpacpi::standby
    Registered led device: tpacpi::thinkvantage
    thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
    ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
    ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
    cat /var/log/acpid.log
    Feb 28 13:19:28 damnation acpid: exiting
    Mar 1 12:48:43 damnation acpid: starting up
    Mar 1 12:48:43 damnation acpid: 4 rules loaded
    Mar 1 12:48:43 damnation acpid: waiting for events: event logging is off
    Mar 1 12:48:44 damnation acpid: client connected from 1737[82:82]
    Mar 1 12:48:44 damnation acpid: 1 client rule loaded
    Mar 1 12:49:39 damnation acpid: client connected from 2523[0:0]
    Mar 1 12:49:39 damnation acpid: 1 client rule loaded
    Mar 1 12:49:56 damnation acpid: exiting
    Mar 1 12:49:56 damnation acpid: starting up
    Mar 1 12:49:56 damnation acpid: 4 rules loaded
    Mar 1 12:49:56 damnation acpid: waiting for events: event logging is off
    Mar 1 12:49:57 damnation acpid: client connected from 2523[0:0]
    Mar 1 12:49:57 damnation acpid: 1 client rule loaded
    Mar 1 12:50:01 damnation acpid: client connected from 1737[82:82]
    Mar 1 12:50:01 damnation acpid: 1 client rule loaded
    Mar 2 10:23:50 damnation acpid: client 2523[0:0] has disconnected
    Mar 2 10:23:50 damnation acpid: client connected from 2523[0:0]
    Mar 2 10:23:50 damnation acpid: 1 client rule loaded
    Mar 2 10:52:18 damnation acpid: client 2523[0:0] has disconnected
    Mar 2 10:52:18 damnation acpid: client connected from 2523[0:0]
    Mar 2 10:52:18 damnation acpid: 1 client rule loaded
    Mar 2 17:00:21 damnation acpid: client 2523[0:0] has disconnected
    Mar 2 17:00:21 damnation acpid: client connected from 2523[0:0]
    Mar 2 17:00:21 damnation acpid: 1 client rule loaded
    Mar 3 09:54:32 damnation acpid: client 2523[0:0] has disconnected
    Mar 3 09:54:32 damnation acpid: client connected from 2523[0:0]
    Mar 3 09:54:32 damnation acpid: 1 client rule loaded
    Mar 3 10:28:14 damnation acpid: exiting
    Mar 3 10:28:14 damnation acpid: starting up
    Mar 3 10:28:14 damnation acpid: 4 rules loaded
    Mar 3 10:28:14 damnation acpid: waiting for events: event logging is off
    Mar 3 10:28:15 damnation acpid: client connected from 2523[0:0]
    Mar 3 10:28:15 damnation acpid: 1 client rule loaded
    Mar 3 10:28:19 damnation acpid: client connected from 1737[82:82]
    Mar 3 10:28:19 damnation acpid: 1 client rule loaded
    Mar 3 10:37:44 damnation acpid: exiting
    Mar 3 10:37:44 damnation acpid: starting up
    Mar 3 10:37:44 damnation acpid: 4 rules loaded
    Mar 3 10:37:44 damnation acpid: waiting for events: event logging is off
    Mar 3 10:37:45 damnation acpid: client connected from 2523[0:0]
    Mar 3 10:37:45 damnation acpid: 1 client rule loaded
    Mar 3 10:37:49 damnation acpid: client connected from 1737[82:82]
    Mar 3 10:37:49 damnation acpid: 1 client rule loaded
    Mar 3 12:22:44 damnation acpid: exiting
    Mar 3 12:23:44 damnation acpid: starting up
    Mar 3 12:23:45 damnation acpid: 4 rules loaded
    Mar 3 12:23:45 damnation acpid: waiting for events: event logging is off
    Mar 3 12:23:46 damnation acpid: client connected from 3417[82:82]
    Mar 3 12:23:46 damnation acpid: 1 client rule loaded
    Mar 3 12:24:40 damnation acpid: client connected from 4287[0:0]
    Mar 3 12:24:40 damnation acpid: 1 client rule loaded
    Mar 3 12:24:55 damnation acpid: exiting
    Mar 3 12:24:55 damnation acpid: starting up
    Mar 3 12:24:55 damnation acpid: 4 rules loaded
    Mar 3 12:24:55 damnation acpid: waiting for events: event logging is off
    Mar 3 12:24:56 damnation acpid: client connected from 4287[0:0]
    Mar 3 12:24:56 damnation acpid: 1 client rule loaded
    Mar 3 12:25:00 damnation acpid: client connected from 3417[82:82]
    Mar 3 12:25:00 damnation acpid: 1 client rule loaded
    Mar 3 12:40:54 damnation acpid: exiting
    Mar 3 12:49:47 damnation acpid: starting up
    Mar 3 12:49:47 damnation acpid: 4 rules loaded
    Mar 3 12:49:47 damnation acpid: waiting for events: event logging is off
    Mar 3 12:49:49 damnation acpid: client connected from 3396[82:82]
    Mar 3 12:49:49 damnation acpid: 1 client rule loaded
    Mar 3 12:50:12 damnation acpid: client connected from 5224[0:0]
    Mar 3 12:50:12 damnation acpid: 1 client rule loaded
    Mar 3 12:50:59 damnation acpid: exiting
    Mar 3 12:50:59 damnation acpid: starting up
    Mar 3 12:50:59 damnation acpid: 4 rules loaded
    Mar 3 12:50:59 damnation acpid: waiting for events: event logging is off
    Mar 3 12:51:00 damnation acpid: client connected from 5224[0:0]
    Mar 3 12:51:00 damnation acpid: 1 client rule loaded
    Mar 3 12:51:04 damnation acpid: client connected from 3396[82:82]
    Mar 3 12:51:04 damnation acpid: 1 client rule loaded
    Mar 3 13:21:42 damnation acpid: exiting
    Mar 3 13:21:42 damnation acpid: starting up
    Mar 3 13:21:42 damnation acpid: 4 rules loaded
    Mar 3 13:21:42 damnation acpid: waiting for events: event logging is off
    Mar 3 13:21:43 damnation acpid: client connected from 5224[0:0]
    Mar 3 13:21:43 damnation acpid: 1 client rule loaded
    Mar 3 13:21:47 damnation acpid: client connected from 3396[82:82]
    Mar 3 13:21:47 damnation acpid: 1 client rule loaded
    Mar 3 13:22:21 damnation acpid: exiting
    Mar 3 13:22:21 damnation acpid: starting up
    Mar 3 13:22:21 damnation acpid: 4 rules loaded
    Mar 3 13:22:21 damnation acpid: waiting for events: event logging is off
    Mar 3 13:22:22 damnation acpid: client connected from 5224[0:0]
    Mar 3 13:22:22 damnation acpid: 1 client rule loaded
    Mar 3 13:22:26 damnation acpid: client connected from 3396[82:82]
    Mar 3 13:22:26 damnation acpid: 1 client rule loaded
    Mar 3 13:23:03 damnation acpid: client 5224[0:0] has disconnected
    Mar 3 13:23:03 damnation acpid: client connected from 5224[0:0]
    Mar 3 13:23:03 damnation acpid: 1 client rule loaded
    Mar 3 13:25:00 damnation acpid: exiting
    Mar 3 13:25:00 damnation acpid: starting up
    Mar 3 13:25:00 damnation acpid: 4 rules loaded
    Mar 3 13:25:00 damnation acpid: waiting for events: event logging is off
    Mar 3 13:25:01 damnation acpid: client connected from 5224[0:0]
    Mar 3 13:25:01 damnation acpid: 1 client rule loaded
    Mar 3 13:25:05 damnation acpid: client connected from 3396[82:82]
    Mar 3 13:25:05 damnation acpid: 1 client rule loaded
    Mar 3 13:29:52 damnation acpid: client connected from 21588[1000:100]
    Mar 3 13:29:52 damnation acpid: 1 client rule loaded
    Mar 3 13:30:27 damnation acpid: client 21588[1000:100] has disconnected
    Mar 3 13:36:15 damnation acpid: exiting
    Mar 3 13:37:54 damnation acpid: starting up
    Mar 3 13:37:54 damnation acpid: 4 rules loaded
    Mar 3 13:37:54 damnation acpid: waiting for events: event logging is off
    Mar 3 13:37:56 damnation acpid: client connected from 3419[82:82]
    Mar 3 13:37:56 damnation acpid: 1 client rule loaded
    Mar 3 13:38:28 damnation acpid: client connected from 4292[0:0]
    Mar 3 13:38:28 damnation acpid: 1 client rule loaded
    Mar 3 13:39:24 damnation acpid: exiting
    Mar 3 13:39:24 damnation acpid: starting up
    Mar 3 13:39:24 damnation acpid: 4 rules loaded
    Mar 3 13:39:24 damnation acpid: waiting for events: event logging is off
    Mar 3 13:39:25 damnation acpid: client connected from 4292[0:0]
    Mar 3 13:39:25 damnation acpid: 1 client rule loaded
    Mar 3 13:39:29 damnation acpid: client connected from 3419[82:82]
    Mar 3 13:39:29 damnation acpid: 1 client rule loaded
    Mar 3 13:44:09 damnation acpid: client connected from 4488[1000:100]
    Mar 3 13:44:09 damnation acpid: 1 client rule loaded
    Mar 3 13:45:42 damnation acpid: client 4488[1000:100] has disconnected
    Mar 3 13:58:17 damnation acpid: exiting
    Mar 3 13:58:17 damnation acpid: starting up
    Mar 3 13:58:17 damnation acpid: 4 rules loaded
    Mar 3 13:58:17 damnation acpid: waiting for events: event logging is off
    Mar 3 13:58:18 damnation acpid: client connected from 4292[0:0]
    Mar 3 13:58:18 damnation acpid: 1 client rule loaded
    Mar 3 13:58:22 damnation acpid: client connected from 3419[82:82]
    Mar 3 13:58:22 damnation acpid: 1 client rule loaded
    (are all these "client has disconnected" messages normal?)
    Last edited by Natanji (2010-03-07 11:03:54)

    I don't know if it works for everyone but i have just fixed the acpi rotate for my x60t
    /usr/bin/xrotate
    #!/bin/sh
    output=LVDS1
    if [ "$XROT_OUTPUT" ]
    then
    output=$XROT_OUTPUT;
    fi
    devices="stylus eraser"
    geomnbr=0
    xrandr=normal
    wacom=normal
    if [ "$1" == "-" ] || [ "$1" == "+" ] || ! [ "$1" ];
    then
    operator="$1";
    [ "$1" ] || operator='+';
    case `xrandr --verbose | grep "^$output " | sed "s/^[^ ]* [^ ]* [^ ]* ([^(]*) \([a-z]*\).*/\1/"` in
    normal) geom=0;;
    left) geom=1;;
    inverted) geom=2;;
    right) geom=3;;
    esac
    let geom=${geom}${operator}1+4
    let geom=${geom}%4
    else
    geom="$1"
    fi
    case $geom in
    1) wacom=CCW; xrandr=left ;;
    2) wacom=HALF; xrandr=inverted ;;
    3) wacom=CW; xrandr=right ;;
    *) wacom=NONE; xrandr=normal ;;
    esac
    echo "xrandr to $xrandr, xsetwacom to $wacom" >&2
    if xrandr --output "$output" --rotate "$xrandr"; then
    for device in $devices
    do
    xsetwacom set "$device" Rotate "$wacom"
    done
    fi
    #workaround for linuxwacom bug
    if [ "`xsetwacom get stylus Mode`" == '1' ]; then
    for decive in $devices
    do
    xsetwacom set stylus CoreEvent "off"
    xsetwacom set stylus Mode "off"
    done
    { sleep 1;
    for device in $devices
    do
    xsetwacom set stylus Mode "on"
    xsetwacom set stylus CoreEvent "on"
    done; } &
    fi
    /etc/acpi/thinkpad-swivel-up.sh       
    #!/bin/bash
    XAUTHORITY=/var/lib/gdm/\:0.Xauth DISPLAY=:0.0 /usr/bin/xrotate 0
    /etc/acpi/thinkpad-swivel-down.sh       
    #!/bin/bash
    XAUTHORITY=/var/lib/gdm/\:0.Xauth DISPLAY=:0.0 /usr/bin/xrotate 1
    The problem was that my acpid starts long before xorg.
    System:
    Thinkpad x60 tablet
    xorg 1.8
    acpid 1.0.10

  • Hardware Kernel Freezes an weird ACPI behavior

    Hi. Im new to the arch linux and linux in general.  I have a Intel DG965WH mobo with 1 GB DDR2 Kingston Valueram and a Nvidia Geforce 8600 GT with a Intel Core 2 Duo 4300.
    I installed and everything went OK. Except that when I first booted the machine, it froze in "Loading UDev uevents [BUSY]" no matter what. Then edited the following line in rc.conf:
    MOD_AUTOLOAD="yes" to MOD_AUTOLOAD="no". Then the system finally booted.
    I noticed  that I, and many more users, even those with no apparent problems has a line where the kernel complains about non-existent processors (AE_NOT_FOUND Device is not present), like this output from dmesg from booting the installed arch:
    Linux version 2.6.22-ARCH (root@T-POWA-LX) (gcc version 4.2.1) #1 SMP PREEMPT Wed Sep 26 21:45:47 CEST 2007
    Command line: root=/dev/sda3 ro
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
    BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003e58f000 (usable)
    BIOS-e820: 000000003e58f000 - 000000003e59c000 (reserved)
    BIOS-e820: 000000003e59c000 - 000000003e638000 (usable)
    BIOS-e820: 000000003e638000 - 000000003e6a5000 (ACPI NVS)
    BIOS-e820: 000000003e6a5000 - 000000003e6a8000 (ACPI data)
    BIOS-e820: 000000003e6a8000 - 000000003e6ef000 (ACPI NVS)
    BIOS-e820: 000000003e6ef000 - 000000003e6f1000 (ACPI data)
    BIOS-e820: 000000003e6f1000 - 000000003e6f2000 (usable)
    BIOS-e820: 000000003e6f2000 - 000000003e6ff000 (ACPI data)
    BIOS-e820: 000000003e6ff000 - 000000003e700000 (usable)
    BIOS-e820: 000000003e700000 - 000000003f000000 (reserved)
    BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    Entering add_active_range(0, 0, 143) 0 entries of 256 used
    Entering add_active_range(0, 256, 255375) 1 entries of 256 used
    Entering add_active_range(0, 255388, 255544) 2 entries of 256 used
    Entering add_active_range(0, 255729, 255730) 3 entries of 256 used
    Entering add_active_range(0, 255743, 255744) 4 entries of 256 used
    end_pfn_map = 1048576
    DMI 2.4 present.
    ACPI: RSDP 000FE020, 0014 (r0 INTEL )
    ACPI: RSDT 3E6FD038, 0050 (r1 INTEL  DG965WH       682       1000013)
    ACPI: FACP 3E6FC000, 0074 (r1 INTEL  DG965WH       682 MSFT  1000013)
    ACPI: DSDT 3E6F7000, 40E9 (r1 INTEL  DG965WH       682 MSFT  1000013)
    ACPI: FACS 3E6A8000, 0040
    ACPI: APIC 3E6F6000, 0078 (r1 INTEL  DG965WH       682 MSFT  1000013)
    ACPI: WDDT 3E6F5000, 0040 (r1 INTEL  DG965WH       682 MSFT  1000013)
    ACPI: MCFG 3E6F4000, 003C (r1 INTEL  DG965WH       682 MSFT  1000013)
    ACPI: ASF! 3E6F3000, 00A6 (r32 INTEL  DG965WH       682 MSFT  1000013)
    ACPI: HPET 3E6F2000, 0038 (r1 INTEL  DG965WH       682 MSFT  1000013)
    ACPI: SSDT 3E6F0000, 01BC (r1 INTEL     CpuPm      682 MSFT  1000013)
    ACPI: SSDT 3E6EF000, 0175 (r1 INTEL   Cpu0Ist      682 MSFT  1000013)
    ACPI: SSDT 3E6A7000, 0175 (r1 INTEL   Cpu1Ist      682 MSFT  1000013)
    ACPI: SSDT 3E6A6000, 0175 (r1 INTEL   Cpu2Ist      682 MSFT  1000013)
    ACPI: SSDT 3E6A5000, 0175 (r1 INTEL   Cpu3Ist      682 MSFT  1000013)
    Entering add_active_range(0, 0, 143) 0 entries of 256 used
    Entering add_active_range(0, 256, 255375) 1 entries of 256 used
    Entering add_active_range(0, 255388, 255544) 2 entries of 256 used
    Entering add_active_range(0, 255729, 255730) 3 entries of 256 used
    Entering add_active_range(0, 255743, 255744) 4 entries of 256 used
    Zone PFN ranges:
      DMA             0 ->     4096
      DMA32        4096 ->  1048576
      Normal    1048576 ->  1048576
    early_node_map[5] active PFN ranges
        0:        0 ->      143
        0:      256 ->   255375
        0:   255388 ->   255544
        0:   255729 ->   255730
        0:   255743 ->   255744
    On node 0 totalpages: 255420
      DMA zone: 56 pages used for memmap
      DMA zone: 1114 pages reserved
      DMA zone: 2813 pages, LIFO batch:0
      DMA32 zone: 3440 pages used for memmap
      DMA32 zone: 247997 pages, LIFO batch:31
      Normal zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 (Bootup-CPU)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Setting APIC routing to flat
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    swsusp: Registered nosave memory region: 000000000008f000 - 00000000000a0000
    swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
    swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
    swsusp: Registered nosave memory region: 000000003e58f000 - 000000003e59c000
    swsusp: Registered nosave memory region: 000000003e638000 - 000000003e6a5000
    swsusp: Registered nosave memory region: 000000003e6a5000 - 000000003e6a8000
    swsusp: Registered nosave memory region: 000000003e6a8000 - 000000003e6ef000
    swsusp: Registered nosave memory region: 000000003e6ef000 - 000000003e6f1000
    swsusp: Registered nosave memory region: 000000003e6f2000 - 000000003e6ff000
    Allocating PCI resources starting at 40000000 (gap: 3f000000:c0f00000)
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    PERCPU: Allocating 33800 bytes of per cpu data
    Built 1 zonelists.  Total pages: 250810
    Kernel command line: root=/dev/sda3 ro
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    time.c: Detected 1798.204 MHz processor.
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
    Checking aperture...
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 995796k/1022976k available (2694k kernel code, 25208k reserved, 1008k data, 248k init)
    Calibrating delay using timer specific routine.. 3599.48 BogoMIPS (lpj=5997581)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    using mwait in idle threads.
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM2)
    SMP alternatives: switching to UP code
    Early unpacking initramfs... done
    ACPI: Core revision 20070126
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    Using local APIC timer interrupts.
    result 12487531
    Detected 12.487 MHz APIC timer.
    SMP alternatives: switching to SMP code
    Booting processor 1/2 APIC 0x1
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3597.28 BogoMIPS (lpj=5994054)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    Intel(R) Core(TM)2 CPU          4300  @ 1.80GHz stepping 02
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    migration_cost=25
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: Using configuration type 1
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    PCI quirk: region 0500-053f claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 11 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    NetLabel: Initializing
    NetLabel:  domain hash size = 128
    NetLabel:  protocols = UNLABELED CIPSOv4
    NetLabel:  unlabeled traffic allowed by default
    PCI-GART: No AMD northbridge found.
    ACPI: RTC can wake from S4
    pnp: 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved
    pnp: 00:01: iomem range 0xfed13000-0xfed13fff has been reserved
    pnp: 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
    pnp: 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
    pnp: 00:06: ioport range 0x500-0x53f has been reserved
    pnp: 00:06: ioport range 0x400-0x47f has been reserved
    pnp: 00:06: ioport range 0x680-0x6ff has been reserved
    PCI: Failed to allocate mem resource #6:20000@50000000 for 0000:01:00.0
    PCI: Bridge: 0000:00:01.0
      IO window: 2000-2fff
      MEM window: 60000000-62ffffff
      PREFETCH window: 40000000-4fffffff
    PCI: Bridge: 0000:00:1c.0
      IO window: disabled.
      MEM window: 63300000-633fffff
      PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.1
      IO window: 1000-1fff
      MEM window: 63000000-630fffff
      PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.2
      IO window: disabled.
      MEM window: 63400000-634fffff
      PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.3
      IO window: disabled.
      MEM window: 63500000-635fffff
      PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.4
      IO window: disabled.
      MEM window: 63600000-636fffff
      PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1e.0
      IO window: disabled.
      MEM window: disabled.
      PREFETCH window: disabled.
    Time: tsc clocksource has been installed.
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 6, 262144 bytes)
    TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 4990k freed
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:01:00.0
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.1:pcie00]
    Allocate Port Service[0000:00:1c.1:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.2:pcie00]
    Allocate Port Service[0000:00:1c.2:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.3:pcie00]
    Allocate Port Service[0000:00:1c.3:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.4 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.4:pcie00]
    Allocate Port Service[0000:00:1c.4:pcie02]
    Real Time Clock Driver v1.12ac
    Linux agpgart interface v0.102 (c) Dave Jones
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: module loaded
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input1
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Freeing unused kernel memory: 248k freed
    libata version 2.21 loaded.
    ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:03:00.0 to 64
    scsi0 : pata_marvell
    scsi1 : pata_marvell
    ata1: PATA max UDMA/100 cmd 0x0000000000011018 ctl 0x0000000000011026 bmdma 0x0000000000011000 irq 17
    ata2: DUMMY
    BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00
    ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL10, max UDMA/33
    ata1.00: configured for UDMA/33
    scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4167B DL10 PQ: 0 ANSI: 5
    ahci 0000:00:1f.2: version 2.2
    ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 19 (level, low) -> IRQ 19
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi2 : ahci
    scsi3 : ahci
    scsi4 : ahci
    scsi5 : ahci
    scsi6 : ahci
    scsi7 : ahci
    ata3: SATA max UDMA/133 cmd 0xffffc20000016100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
    ata4: SATA max UDMA/133 cmd 0xffffc20000016180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
    ata5: SATA max UDMA/133 cmd 0xffffc20000016200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
    ata6: SATA max UDMA/133 cmd 0xffffc20000016280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
    ata7: SATA max UDMA/133 cmd 0xffffc20000016300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
    ata8: SATA max UDMA/133 cmd 0xffffc20000016380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
    ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata3.00: ATA-7: SAMSUNG HD160JJ, WU100-33, max UDMA7
    ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata3.00: configured for UDMA/133
    ata4: SATA link down (SStatus 0 SControl 300)
    ata5: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link down (SStatus 0 SControl 300)
    ata7: SATA link down (SStatus 0 SControl 300)
    ata8: SATA link down (SStatus 0 SControl 300)
    scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  WU10 PQ: 0 ANSI: 5
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 18, io mem 0x63225c00
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    USB Universal Host Controller Interface driver v3.0
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030c0
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x000030a0
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 <<6>usb 2-2: new low speed USB device using uhci_hcd and address 2
    sda5 > sda3 sda4
    sd 2:0:0:0: [sda] Attached SCSI disk
    ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    usb 2-2: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0x63225800
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 6 ports detected
    usb 7-3: new high speed USB device using ehci_hcd and address 2
    usb 7-3: configuration #1 chosen from 2 choices
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Initializing USB Mass Storage driver...
    usbcore: registered new interface driver hiddev
    scsi8 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    input: HID 0458:1002 as /class/input/input2
    input: USB HID v1.00 Gamepad [HID 0458:1002] on usb-0000:00:1a.0-2
    usb 6-1: new low speed USB device using uhci_hcd and address 2
    usb 6-1: configuration #1 chosen from 1 choice
    input: HID 0458:1002 as /class/input/input3
    input: USB HID v1.00 Gamepad [HID 0458:1002] on usb-0000:00:1d.2-1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    scsi 8:0:0:0: Direct-Access     Apple    iPod             2.70 PQ: 0 ANSI: 2
    sd 8:0:0:0: [sdb] 495616 2048-byte hardware sectors (1015 MB)
    sd 8:0:0:0: [sdb] Write Protect is off
    sd 8:0:0:0: [sdb] Mode Sense: 64 00 00 08
    sd 8:0:0:0: [sdb] Assuming drive cache: write through
    sd 8:0:0:0: [sdb] 495616 2048-byte hardware sectors (1015 MB)
    sd 8:0:0:0: [sdb] Write Protect is off
    sd 8:0:0:0: [sdb] Mode Sense: 64 00 00 08
    sd 8:0:0:0: [sdb] Assuming drive cache: write through
    sdb: unknown partition table
    sd 8:0:0:0: [sdb] Attached SCSI removable disk
    usb-storage: device scan complete
    kjournald starting.  Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
    Copyright (c) 1999-2006 Intel Corporation.
    ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:19.0 to 64
    e1000: 0000:00:19.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:19:d1:55:69:65
    e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    input: Power Button (FF) as /class/input/input4
    ACPI: Power Button (FF) [PWRF]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: Processor [CPU1] (supports 8 throttling states)
    ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
    ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
    EXT3 FS on sda3, internal journal
    NTFS driver 2.1.28 [Flags: R/W MODULE].
    NTFS volume version 3.1.
    Adding 996020k swap on /dev/sda4.  Priority:-1 extents:1 across:996020k
    e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
    e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
    e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
    e1000: eth0: e1000_watchdog: 10/100 speed: disabling TSO
    Then I tried to compile the kernel 2.6.23.12 from kernel.org and it freezes little after these two lines:
    ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
    ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126].
    I can´t put the log for this kernel boot because the system freezes. I tried to pass acpi=off boot parameters, but I had no success.
    Here the make menuconfig generated file:
    # Automatically generated make config: don't edit
    # Linux kernel version: 2.6.23.12
    # Sun Jan 13 12:45:31 2008
    CONFIG_X86_64=y
    CONFIG_64BIT=y
    CONFIG_X86=y
    CONFIG_GENERIC_TIME=y
    CONFIG_GENERIC_TIME_VSYSCALL=y
    CONFIG_GENERIC_CMOS_UPDATE=y
    CONFIG_ZONE_DMA32=y
    CONFIG_LOCKDEP_SUPPORT=y
    CONFIG_STACKTRACE_SUPPORT=y
    CONFIG_SEMAPHORE_SLEEPERS=y
    CONFIG_MMU=y
    CONFIG_ZONE_DMA=y
    CONFIG_RWSEM_GENERIC_SPINLOCK=y
    CONFIG_GENERIC_HWEIGHT=y
    CONFIG_GENERIC_CALIBRATE_DELAY=y
    CONFIG_X86_CMPXCHG=y
    CONFIG_EARLY_PRINTK=y
    CONFIG_GENERIC_ISA_DMA=y
    CONFIG_GENERIC_IOMAP=y
    CONFIG_ARCH_MAY_HAVE_PC_FDC=y
    CONFIG_ARCH_POPULATES_NODE_MAP=y
    CONFIG_DMI=y
    CONFIG_AUDIT_ARCH=y
    CONFIG_GENERIC_BUG=y
    # CONFIG_ARCH_HAS_ILOG2_U32 is not set
    # CONFIG_ARCH_HAS_ILOG2_U64 is not set
    CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
    # General setup
    CONFIG_EXPERIMENTAL=y
    CONFIG_LOCK_KERNEL=y
    CONFIG_INIT_ENV_ARG_LIMIT=32
    CONFIG_LOCALVERSION=""
    CONFIG_LOCALVERSION_AUTO=y
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_SYSVIPC_SYSCTL=y
    CONFIG_POSIX_MQUEUE=y
    # CONFIG_BSD_PROCESS_ACCT is not set
    # CONFIG_TASKSTATS is not set
    # CONFIG_USER_NS is not set
    # CONFIG_AUDIT is not set
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    CONFIG_LOG_BUF_SHIFT=18
    # CONFIG_CPUSETS is not set
    CONFIG_SYSFS_DEPRECATED=y
    CONFIG_RELAY=y
    CONFIG_BLK_DEV_INITRD=y
    CONFIG_INITRAMFS_SOURCE=""
    CONFIG_CC_OPTIMIZE_FOR_SIZE=y
    CONFIG_SYSCTL=y
    # CONFIG_EMBEDDED is not set
    CONFIG_UID16=y
    CONFIG_SYSCTL_SYSCALL=y
    CONFIG_KALLSYMS=y
    CONFIG_KALLSYMS_ALL=y
    # CONFIG_KALLSYMS_EXTRA_PASS is not set
    CONFIG_HOTPLUG=y
    CONFIG_PRINTK=y
    CONFIG_BUG=y
    CONFIG_ELF_CORE=y
    CONFIG_BASE_FULL=y
    CONFIG_FUTEX=y
    CONFIG_ANON_INODES=y
    CONFIG_EPOLL=y
    CONFIG_SIGNALFD=y
    CONFIG_EVENTFD=y
    CONFIG_SHMEM=y
    CONFIG_VM_EVENT_COUNTERS=y
    CONFIG_SLAB=y
    # CONFIG_SLUB is not set
    # CONFIG_SLOB is not set
    CONFIG_RT_MUTEXES=y
    # CONFIG_TINY_SHMEM is not set
    CONFIG_BASE_SMALL=0
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    CONFIG_MODULE_FORCE_UNLOAD=y
    # CONFIG_MODVERSIONS is not set
    # CONFIG_MODULE_SRCVERSION_ALL is not set
    CONFIG_KMOD=y
    CONFIG_STOP_MACHINE=y
    CONFIG_BLOCK=y
    # CONFIG_BLK_DEV_IO_TRACE is not set
    # CONFIG_BLK_DEV_BSG is not set
    # IO Schedulers
    CONFIG_IOSCHED_NOOP=y
    # CONFIG_IOSCHED_AS is not set
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_DEFAULT_AS is not set
    # CONFIG_DEFAULT_DEADLINE is not set
    CONFIG_DEFAULT_CFQ=y
    # CONFIG_DEFAULT_NOOP is not set
    CONFIG_DEFAULT_IOSCHED="cfq"
    # Processor type and features
    CONFIG_X86_PC=y
    # CONFIG_X86_VSMP is not set
    # CONFIG_MK8 is not set
    # CONFIG_MPSC is not set
    CONFIG_MCORE2=y
    # CONFIG_GENERIC_CPU is not set
    CONFIG_X86_L1_CACHE_BYTES=64
    CONFIG_X86_L1_CACHE_SHIFT=6
    CONFIG_X86_INTERNODE_CACHE_BYTES=64
    CONFIG_X86_TSC=y
    CONFIG_X86_GOOD_APIC=y
    # CONFIG_MICROCODE is not set
    CONFIG_X86_MSR=y
    CONFIG_X86_CPUID=y
    CONFIG_X86_HT=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_MTRR=y
    CONFIG_SMP=y
    # CONFIG_SCHED_SMT is not set
    CONFIG_SCHED_MC=y
    # CONFIG_PREEMPT_NONE is not set
    CONFIG_PREEMPT_VOLUNTARY=y
    # CONFIG_PREEMPT is not set
    CONFIG_PREEMPT_BKL=y
    CONFIG_NUMA=y
    # CONFIG_K8_NUMA is not set
    CONFIG_NODES_SHIFT=6
    # CONFIG_X86_64_ACPI_NUMA is not set
    # CONFIG_NUMA_EMU is not set
    CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
    CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
    CONFIG_ARCH_SPARSEMEM_ENABLE=y
    CONFIG_SELECT_MEMORY_MODEL=y
    # CONFIG_FLATMEM_MANUAL is not set
    CONFIG_DISCONTIGMEM_MANUAL=y
    # CONFIG_SPARSEMEM_MANUAL is not set
    CONFIG_DISCONTIGMEM=y
    CONFIG_FLAT_NODE_MEM_MAP=y
    CONFIG_NEED_MULTIPLE_NODES=y
    # CONFIG_SPARSEMEM_STATIC is not set
    CONFIG_SPLIT_PTLOCK_CPUS=4
    CONFIG_MIGRATION=y
    CONFIG_RESOURCES_64BIT=y
    CONFIG_ZONE_DMA_FLAG=1
    CONFIG_BOUNCE=y
    CONFIG_VIRT_TO_BUS=y
    CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
    CONFIG_OUT_OF_LINE_PFN_TO_PAGE=y
    CONFIG_NR_CPUS=2
    CONFIG_PHYSICAL_ALIGN=0x200000
    CONFIG_HOTPLUG_CPU=y
    CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
    CONFIG_HPET_TIMER=y
    # CONFIG_HPET_EMULATE_RTC is not set
    CONFIG_IOMMU=y
    # CONFIG_CALGARY_IOMMU is not set
    CONFIG_SWIOTLB=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_INTEL=y
    # CONFIG_X86_MCE_AMD is not set
    # CONFIG_KEXEC is not set
    # CONFIG_CRASH_DUMP is not set
    # CONFIG_RELOCATABLE is not set
    CONFIG_PHYSICAL_START=0x200000
    CONFIG_SECCOMP=y
    # CONFIG_CC_STACKPROTECTOR is not set
    # CONFIG_HZ_100 is not set
    CONFIG_HZ_250=y
    # CONFIG_HZ_300 is not set
    # CONFIG_HZ_1000 is not set
    CONFIG_HZ=250
    CONFIG_K8_NB=y
    CONFIG_GENERIC_HARDIRQS=y
    CONFIG_GENERIC_IRQ_PROBE=y
    CONFIG_ISA_DMA_API=y
    CONFIG_GENERIC_PENDING_IRQ=y
    # Power management options
    CONFIG_PM=y
    # CONFIG_PM_LEGACY is not set
    # CONFIG_PM_DEBUG is not set
    CONFIG_PM_SLEEP_SMP=y
    CONFIG_PM_SLEEP=y
    CONFIG_SUSPEND_SMP_POSSIBLE=y
    CONFIG_SUSPEND=y
    CONFIG_HIBERNATION_SMP_POSSIBLE=y
    CONFIG_HIBERNATION=y
    CONFIG_PM_STD_PARTITION=""
    CONFIG_ACPI=y
    CONFIG_ACPI_SLEEP=y
    # CONFIG_ACPI_PROCFS is not set
    # CONFIG_ACPI_PROC_EVENT is not set
    CONFIG_ACPI_AC=m
    CONFIG_ACPI_BATTERY=m
    CONFIG_ACPI_BUTTON=m
    CONFIG_ACPI_VIDEO=m
    CONFIG_ACPI_FAN=m
    # CONFIG_ACPI_DOCK is not set
    CONFIG_ACPI_PROCESSOR=m
    CONFIG_ACPI_HOTPLUG_CPU=y
    CONFIG_ACPI_THERMAL=m
    # CONFIG_ACPI_NUMA is not set
    # CONFIG_ACPI_ASUS is not set
    # CONFIG_ACPI_TOSHIBA is not set
    CONFIG_ACPI_BLACKLIST_YEAR=0
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_SYSTEM=y
    CONFIG_X86_PM_TIMER=y
    CONFIG_ACPI_CONTAINER=m
    # CONFIG_ACPI_SBS is not set
    # CPU Frequency scaling
    CONFIG_CPU_FREQ=y
    CONFIG_CPU_FREQ_TABLE=y
    # CONFIG_CPU_FREQ_DEBUG is not set
    CONFIG_CPU_FREQ_STAT=y
    # CONFIG_CPU_FREQ_STAT_DETAILS is not set
    CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
    # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
    CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
    # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
    CONFIG_CPU_FREQ_GOV_USERSPACE=y
    CONFIG_CPU_FREQ_GOV_ONDEMAND=y
    CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
    # CPUFreq processor drivers
    # CONFIG_X86_POWERNOW_K8 is not set
    # CONFIG_X86_SPEEDSTEP_CENTRINO is not set
    CONFIG_X86_ACPI_CPUFREQ=m
    # shared options
    # CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
    # CONFIG_X86_SPEEDSTEP_LIB is not set
    # Bus options (PCI etc.)
    CONFIG_PCI=y
    CONFIG_PCI_DIRECT=y
    CONFIG_PCI_MMCONFIG=y
    CONFIG_PCIEPORTBUS=y
    CONFIG_PCIEAER=y
    CONFIG_ARCH_SUPPORTS_MSI=y
    # CONFIG_PCI_MSI is not set
    # CONFIG_PCI_DEBUG is not set
    # CONFIG_HT_IRQ is not set
    # PCCARD (PCMCIA/CardBus) support
    # CONFIG_PCCARD is not set
    # CONFIG_HOTPLUG_PCI is not set
    # Executable file formats / Emulations
    CONFIG_BINFMT_ELF=y
    # CONFIG_BINFMT_MISC is not set
    CONFIG_IA32_EMULATION=y
    CONFIG_IA32_AOUT=y
    CONFIG_COMPAT=y
    CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
    CONFIG_SYSVIPC_COMPAT=y
    # Networking
    CONFIG_NET=y
    # Networking options
    CONFIG_PACKET=y
    # CONFIG_PACKET_MMAP is not set
    CONFIG_UNIX=y
    # CONFIG_NET_KEY is not set
    CONFIG_INET=y
    CONFIG_IP_MULTICAST=y
    # CONFIG_IP_ADVANCED_ROUTER is not set
    CONFIG_IP_FIB_HASH=y
    CONFIG_IP_PNP=y
    CONFIG_IP_PNP_DHCP=y
    # CONFIG_IP_PNP_BOOTP is not set
    # CONFIG_IP_PNP_RARP is not set
    CONFIG_NET_IPIP=y
    # CONFIG_NET_IPGRE is not set
    # CONFIG_IP_MROUTE is not set
    # CONFIG_ARPD is not set
    # CONFIG_SYN_COOKIES is not set
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set
    # CONFIG_INET_XFRM_TUNNEL is not set
    CONFIG_INET_TUNNEL=y
    # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
    # CONFIG_INET_XFRM_MODE_TUNNEL is not set
    # CONFIG_INET_XFRM_MODE_BEET is not set
    CONFIG_INET_DIAG=y
    CONFIG_INET_TCP_DIAG=y
    # CONFIG_TCP_CONG_ADVANCED is not set
    CONFIG_TCP_CONG_CUBIC=y
    CONFIG_DEFAULT_TCP_CONG="cubic"
    # CONFIG_TCP_MD5SIG is not set
    CONFIG_IPV6=y
    # CONFIG_IPV6_PRIVACY is not set
    # CONFIG_IPV6_ROUTER_PREF is not set
    # CONFIG_IPV6_OPTIMISTIC_DAD is not set
    # CONFIG_INET6_AH is not set
    # CONFIG_INET6_ESP is not set
    # CONFIG_INET6_IPCOMP is not set
    # CONFIG_IPV6_MIP6 is not set
    # CONFIG_INET6_XFRM_TUNNEL is not set
    # CONFIG_INET6_TUNNEL is not set
    # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
    # CONFIG_INET6_XFRM_MODE_TUNNEL is not set
    # CONFIG_INET6_XFRM_MODE_BEET is not set
    # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
    CONFIG_IPV6_SIT=y
    # CONFIG_IPV6_TUNNEL is not set
    # CONFIG_IPV6_MULTIPLE_TABLES is not set
    # CONFIG_NETWORK_SECMARK is not set
    # CONFIG_NETFILTER is not set
    # CONFIG_IP_DCCP is not set
    # CONFIG_IP_SCTP is not set
    # CONFIG_TIPC is not set
    # CONFIG_ATM is not set
    # CONFIG_BRIDGE is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_DECNET is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    # QoS and/or fair queueing
    # CONFIG_NET_SCHED is not set
    CONFIG_NET_SCH_FIFO=y
    # Network testing
    # CONFIG_NET_PKTGEN is not set
    # CONFIG_NET_TCPPROBE is not set
    # CONFIG_HAMRADIO is not set
    # CONFIG_IRDA is not set
    CONFIG_BT=y
    # CONFIG_BT_L2CAP is not set
    # CONFIG_BT_SCO is not set
    # Bluetooth device drivers
    # CONFIG_BT_HCIUSB is not set
    # CONFIG_BT_HCIUART is not set
    # CONFIG_BT_HCIBCM203X is not set
    # CONFIG_BT_HCIBPA10X is not set
    # CONFIG_BT_HCIBFUSB is not set
    # CONFIG_BT_HCIVHCI is not set
    # CONFIG_AF_RXRPC is not set
    # Wireless
    CONFIG_CFG80211=y
    CONFIG_WIRELESS_EXT=y
    CONFIG_MAC80211=m
    # CONFIG_MAC80211_DEBUG is not set
    CONFIG_IEEE80211=m
    # CONFIG_IEEE80211_DEBUG is not set
    # CONFIG_IEEE80211_CRYPT_WEP is not set
    # CONFIG_IEEE80211_CRYPT_CCMP is not set
    # CONFIG_IEEE80211_CRYPT_TKIP is not set
    # CONFIG_IEEE80211_SOFTMAC is not set
    # CONFIG_RFKILL is not set
    # CONFIG_NET_9P is not set
    # Device Drivers
    # Generic Driver Options
    CONFIG_STANDALONE=y
    CONFIG_PREVENT_FIRMWARE_BUILD=y
    CONFIG_FW_LOADER=y
    # CONFIG_DEBUG_DRIVER is not set
    # CONFIG_DEBUG_DEVRES is not set
    # CONFIG_SYS_HYPERVISOR is not set
    # CONFIG_CONNECTOR is not set
    # CONFIG_MTD is not set
    # CONFIG_PARPORT is not set
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set
    # Protocols
    CONFIG_PNPACPI=y
    CONFIG_BLK_DEV=y
    # CONFIG_BLK_DEV_FD is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    # CONFIG_BLK_DEV_COW_COMMON is not set
    CONFIG_BLK_DEV_LOOP=y
    # CONFIG_BLK_DEV_CRYPTOLOOP is not set
    # CONFIG_BLK_DEV_NBD is not set
    # CONFIG_BLK_DEV_SX8 is not set
    # CONFIG_BLK_DEV_UB is not set
    CONFIG_BLK_DEV_RAM=y
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=4096
    CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
    # CONFIG_CDROM_PKTCDVD is not set
    # CONFIG_ATA_OVER_ETH is not set
    # CONFIG_MISC_DEVICES is not set
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y
    # Please see Documentation/ide.txt for help/info on IDE drives
    # CONFIG_BLK_DEV_IDE_SATA is not set
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    CONFIG_IDEDISK_MULTI_MODE=y
    CONFIG_BLK_DEV_IDECD=y
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDEFLOPPY is not set
    # CONFIG_BLK_DEV_IDESCSI is not set
    CONFIG_BLK_DEV_IDEACPI=y
    # CONFIG_IDE_TASK_IOCTL is not set
    CONFIG_IDE_PROC_FS=y
    # IDE chipset support/bugfixes
    CONFIG_IDE_GENERIC=y
    # CONFIG_BLK_DEV_CMD640 is not set
    # CONFIG_BLK_DEV_IDEPNP is not set
    CONFIG_BLK_DEV_IDEPCI=y
    # CONFIG_IDEPCI_SHARE_IRQ is not set
    CONFIG_IDEPCI_PCIBUS_ORDER=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    # CONFIG_BLK_DEV_GENERIC is not set
    # CONFIG_BLK_DEV_OPTI621 is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    # CONFIG_IDEDMA_ONLYDISK is not set
    # CONFIG_BLK_DEV_AEC62XX is not set
    # CONFIG_BLK_DEV_ALI15X3 is not set
    CONFIG_BLK_DEV_AMD74XX=y
    CONFIG_BLK_DEV_ATIIXP=y
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    # CONFIG_BLK_DEV_HPT366 is not set
    # CONFIG_BLK_DEV_JMICRON is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    CONFIG_BLK_DEV_PIIX=y
    # CONFIG_BLK_DEV_IT8213 is not set
    # CONFIG_BLK_DEV_IT821X is not set
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    CONFIG_BLK_DEV_PDC202XX_NEW=y
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SIS5513 is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    # CONFIG_BLK_DEV_VIA82CXXX is not set
    # CONFIG_BLK_DEV_TC86C001 is not set
    # CONFIG_IDE_ARM is not set
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    # CONFIG_BLK_DEV_HD is not set
    # SCSI device support
    # CONFIG_RAID_ATTRS is not set
    CONFIG_SCSI=y
    CONFIG_SCSI_DMA=y
    # CONFIG_SCSI_TGT is not set
    # CONFIG_SCSI_NETLINK is not set
    CONFIG_SCSI_PROC_FS=y
    # SCSI support type (disk, tape, CD-ROM)
    CONFIG_BLK_DEV_SD=y
    # CONFIG_CHR_DEV_ST is not set
    # CONFIG_CHR_DEV_OSST is not set
    CONFIG_BLK_DEV_SR=y
    # CONFIG_BLK_DEV_SR_VENDOR is not set
    CONFIG_CHR_DEV_SG=y
    # CONFIG_CHR_DEV_SCH is not set
    # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
    # CONFIG_SCSI_MULTI_LUN is not set
    CONFIG_SCSI_CONSTANTS=y
    # CONFIG_SCSI_LOGGING is not set
    # CONFIG_SCSI_SCAN_ASYNC is not set
    CONFIG_SCSI_WAIT_SCAN=m
    # SCSI Transports
    CONFIG_SCSI_SPI_ATTRS=y
    # CONFIG_SCSI_FC_ATTRS is not set
    # CONFIG_SCSI_ISCSI_ATTRS is not set
    # CONFIG_SCSI_SAS_LIBSAS is not set
    CONFIG_SCSI_LOWLEVEL=y
    # CONFIG_ISCSI_TCP is not set
    # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
    # CONFIG_SCSI_3W_9XXX is not set
    # CONFIG_SCSI_ACARD is not set
    # CONFIG_SCSI_AACRAID is not set
    # CONFIG_SCSI_AIC7XXX is not set
    # CONFIG_SCSI_AIC7XXX_OLD is not set
    CONFIG_SCSI_AIC79XX=y
    CONFIG_AIC79XX_CMDS_PER_DEVICE=32
    CONFIG_AIC79XX_RESET_DELAY_MS=4000
    # CONFIG_AIC79XX_DEBUG_ENABLE is not set
    CONFIG_AIC79XX_DEBUG_MASK=0
    # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
    # CONFIG_SCSI_AIC94XX is not set
    # CONFIG_SCSI_ARCMSR is not set
    # CONFIG_MEGARAID_NEWGEN is not set
    # CONFIG_MEGARAID_LEGACY is not set
    # CONFIG_MEGARAID_SAS is not set
    # CONFIG_SCSI_HPTIOP is not set
    # CONFIG_SCSI_BUSLOGIC is not set
    # CONFIG_SCSI_DMX3191D is not set
    # CONFIG_SCSI_EATA is not set
    # CONFIG_SCSI_FUTURE_DOMAIN is not set
    # CONFIG_SCSI_GDTH is not set
    # CONFIG_SCSI_IPS is not set
    # CONFIG_SCSI_INITIO is not set
    # CONFIG_SCSI_INIA100 is not set
    # CONFIG_SCSI_STEX is not set
    # CONFIG_SCSI_SYM53C8XX_2 is not set
    # CONFIG_SCSI_IPR is not set
    # CONFIG_SCSI_QLOGIC_1280 is not set
    # CONFIG_SCSI_QLA_FC is not set
    # CONFIG_SCSI_QLA_ISCSI is not set
    # CONFIG_SCSI_LPFC is not set
    # CONFIG_SCSI_DC395x is not set
    # CONFIG_SCSI_DC390T is not set
    # CONFIG_SCSI_DEBUG is not set
    # CONFIG_SCSI_SRP is not set
    CONFIG_ATA=y
    # CONFIG_ATA_NONSTANDARD is not set
    CONFIG_ATA_ACPI=y
    CONFIG_SATA_AHCI=y
    # CONFIG_SATA_SVW is not set
    CONFIG_ATA_PIIX=y
    # CONFIG_SATA_MV is not set
    # CONFIG_SATA_NV is not set
    # CONFIG_PDC_ADMA is not set
    # CONFIG_SATA_QSTOR is not set
    # CONFIG_SATA_PROMISE is not set
    # CONFIG_SATA_SX4 is not set
    # CONFIG_SATA_SIL is not set
    # CONFIG_SATA_SIL24 is not set
    # CONFIG_SATA_SIS is not set
    # CONFIG_SATA_ULI is not set
    # CONFIG_SATA_VIA is not set
    # CONFIG_SATA_VITESSE is not set
    # CONFIG_SATA_INIC162X is not set
    # CONFIG_PATA_ALI is not set
    # CONFIG_PATA_AMD is not set
    # CONFIG_PATA_ARTOP is not set
    # CONFIG_PATA_ATIIXP is not set
    # CONFIG_PATA_CMD640_PCI is not set
    # CONFIG_PATA_CMD64X is not set
    # CONFIG_PATA_CS5520 is not set
    # CONFIG_PATA_CS5530 is not set
    # CONFIG_PATA_CYPRESS is not set
    # CONFIG_PATA_EFAR is not set
    # CONFIG_ATA_GENERIC is not set
    # CONFIG_PATA_HPT366 is not set
    # CONFIG_PATA_HPT37X is not set
    # CONFIG_PATA_HPT3X2N is not set
    # CONFIG_PATA_HPT3X3 is not set
    # CONFIG_PATA_IT821X is not set
    # CONFIG_PATA_IT8213 is not set
    # CONFIG_PATA_JMICRON is not set
    # CONFIG_PATA_TRIFLEX is not set
    # CONFIG_PATA_MARVELL is not set
    # CONFIG_PATA_MPIIX is not set
    # CONFIG_PATA_OLDPIIX is not set
    # CONFIG_PATA_NETCELL is not set
    # CONFIG_PATA_NS87410 is not set
    # CONFIG_PATA_OPTI is not set
    # CONFIG_PATA_OPTIDMA is not set
    # CONFIG_PATA_PDC_OLD is not set
    # CONFIG_PATA_RADISYS is not set
    # CONFIG_PATA_RZ1000 is not set
    # CONFIG_PATA_SC1200 is not set
    # CONFIG_PATA_SERVERWORKS is not set
    # CONFIG_PATA_PDC2027X is not set
    # CONFIG_PATA_SIL680 is not set
    # CONFIG_PATA_SIS is not set
    # CONFIG_PATA_VIA is not set
    # CONFIG_PATA_WINBOND is not set
    CONFIG_MD=y
    # CONFIG_BLK_DEV_MD is not set
    CONFIG_BLK_DEV_DM=y
    # CONFIG_DM_DEBUG is not set
    # CONFIG_DM_CRYPT is not set
    # CONFIG_DM_SNAPSHOT is not set
    # CONFIG_DM_MIRROR is not set
    # CONFIG_DM_ZERO is not set
    # CONFIG_DM_MULTIPATH is not set
    # CONFIG_DM_DELAY is not set
    # Fusion MPT device support
    CONFIG_FUSION=y
    CONFIG_FUSION_SPI=y
    # CONFIG_FUSION_FC is not set
    # CONFIG_FUSION_SAS is not set
    CONFIG_FUSION_MAX_SGE=128
    # CONFIG_FUSION_CTL is not set
    # CONFIG_FUSION_LOGGING is not set
    # IEEE 1394 (FireWire) support
    # CONFIG_FIREWIRE is not set
    # CONFIG_IEEE1394 is not set
    # CONFIG_I2O is not set
    CONFIG_MACINTOSH_DRIVERS=y
    # CONFIG_MAC_EMUMOUSEBTN is not set
    CONFIG_NETDEVICES=y
    # CONFIG_NETDEVICES_MULTIQUEUE is not set
    # CONFIG_DUMMY is not set
    # CONFIG_BONDING is not set
    # CONFIG_MACVLAN is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_NET_SB1000 is not set
    # CONFIG_ARCNET is not set
    # CONFIG_PHYLIB is not set
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=y
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    # CONFIG_CASSINI is not set
    # CONFIG_NET_VENDOR_3COM is not set
    # CONFIG_NET_TULIP is not set
    # CONFIG_HP100 is not set
    CONFIG_NET_PCI=y
    # CONFIG_PCNET32 is not set
    # CONFIG_AMD8111_ETH is not set
    # CONFIG_ADAPTEC_STARFIRE is not set
    # CONFIG_B44 is not set
    # CONFIG_FORCEDETH is not set
    # CONFIG_DGRS is not set
    # CONFIG_EEPRO100 is not set
    CONFIG_E100=y
    # CONFIG_FEALNX is not set
    # CONFIG_NATSEMI is not set
    # CONFIG_NE2K_PCI is not set
    # CONFIG_8139CP is not set
    # CONFIG_8139TOO is not set
    # CONFIG_SIS900 is not set
    # CONFIG_EPIC100 is not set
    # CONFIG_SUNDANCE is not set
    # CONFIG_VIA_RHINE is not set
    # CONFIG_SC92031 is not set
    # CONFIG_NETDEV_1000 is not set
    # CONFIG_NETDEV_10000 is not set
    # CONFIG_TR is not set
    # Wireless LAN
    # CONFIG_WLAN_PRE80211 is not set
    # CONFIG_WLAN_80211 is not set
    # USB Network Adapters
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_USBNET_MII is not set
    # CONFIG_USB_USBNET is not set
    # CONFIG_WAN is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PPP is not set
    # CONFIG_SLIP is not set
    # CONFIG_NET_FC is not set
    # CONFIG_SHAPER is not set
    CONFIG_NETCONSOLE=y
    CONFIG_NETPOLL=y
    # CONFIG_NETPOLL_TRAP is not set
    CONFIG_NET_POLL_CONTROLLER=y
    # CONFIG_ISDN is not set
    # CONFIG_PHONE is not set
    # Input device support
    CONFIG_INPUT=y
    # CONFIG_INPUT_FF_MEMLESS is not set
    # CONFIG_INPUT_POLLDEV is not set
    # Userland interfaces
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    CONFIG_INPUT_JOYDEV=y
    # CONFIG_INPUT_TSDEV is not set
    CONFIG_INPUT_EVDEV=y
    # CONFIG_INPUT_EVBUG is not set
    # Input Device Drivers
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_LKKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    # CONFIG_KEYBOARD_STOWAWAY is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    CONFIG_MOUSE_PS2_ALPS=y
    CONFIG_MOUSE_PS2_LOGIPS2PP=y
    CONFIG_MOUSE_PS2_SYNAPTICS=y
    CONFIG_MOUSE_PS2_LIFEBOOK=y
    CONFIG_MOUSE_PS2_TRACKPOINT=y
    # CONFIG_MOUSE_PS2_TOUCHKIT is not set
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_MOUSE_APPLETOUCH is not set
    # CONFIG_MOUSE_VSXXXAA is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TABLET is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    # CONFIG_INPUT_MISC is not set
    # Hardware I/O ports
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    # CONFIG_SERIO_SERPORT is not set
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PCIPS2 is not set
    CONFIG_SERIO_LIBPS2=y
    # CONFIG_SERIO_RAW is not set
    # CONFIG_GAMEPORT is not set
    # Character devices
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_VT_HW_CONSOLE_BINDING is not set
    # CONFIG_SERIAL_NONSTANDARD is not set
    # Serial drivers
    CONFIG_SERIAL_8250=y
    CONFIG_SERIAL_8250_CONSOLE=y
    CONFIG_FIX_EARLYCON_MEM=y
    CONFIG_SERIAL_8250_PCI=y
    CONFIG_SERIAL_8250_PNP=y
    CONFIG_SERIAL_8250_NR_UARTS=4
    CONFIG_SERIAL_8250_RUNTIME_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set
    # Non-8250 serial port support
    CONFIG_SERIAL_CORE=y
    CONFIG_SERIAL_CORE_CONSOLE=y
    # CONFIG_SERIAL_JSM is not set
    CONFIG_UNIX98_PTYS=y
    # CONFIG_LEGACY_PTYS is not set
    # CONFIG_IPMI_HANDLER is not set
    # CONFIG_WATCHDOG is not set
    CONFIG_HW_RANDOM=y
    CONFIG_HW_RANDOM_INTEL=y
    CONFIG_HW_RANDOM_AMD=y
    # CONFIG_NVRAM is not set
    CONFIG_RTC=y
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    CONFIG_AGP=y
    CONFIG_AGP_AMD64=y
    # CONFIG_AGP_INTEL is not set
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_VIA is not set
    # CONFIG_DRM is not set
    # CONFIG_MWAVE is not set
    # CONFIG_PC8736x_GPIO is not set
    CONFIG_RAW_DRIVER=y
    CONFIG_MAX_RAW_DEVS=256
    CONFIG_HPET=y
    # CONFIG_HPET_RTC_IRQ is not set
    CONFIG_HPET_MMAP=y
    # CONFIG_HANGCHECK_TIMER is not set
    # CONFIG_TCG_TPM is not set
    # CONFIG_TELCLOCK is not set
    CONFIG_DEVPORT=y
    # CONFIG_I2C is not set
    # SPI support
    # CONFIG_SPI is not set
    # CONFIG_SPI_MASTER is not set
    # CONFIG_W1 is not set
    # CONFIG_POWER_SUPPLY is not set
    CONFIG_HWMON=y
    CONFIG_HWMON_VID=y
    # CONFIG_SENSORS_ABITUGURU is not set
    # CONFIG_SENSORS_ABITUGURU3 is not set
    # CONFIG_SENSORS_K8TEMP is not set
    # CONFIG_SENSORS_F71805F is not set
    CONFIG_SENSORS_CORETEMP=y
    # CONFIG_SENSORS_IT87 is not set
    # CONFIG_SENSORS_PC87360 is not set
    # CONFIG_SENSORS_PC87427 is not set
    # CONFIG_SENSORS_SIS5595 is not set
    # CONFIG_SENSORS_SMSC47M1 is not set
    # CONFIG_SENSORS_SMSC47B397 is not set
    # CONFIG_SENSORS_VIA686A is not set
    # CONFIG_SENSORS_VT1211 is not set
    # CONFIG_SENSORS_VT8231 is not set
    # CONFIG_SENSORS_W83627HF is not set
    CONFIG_SENSORS_W83627EHF=y
    # CONFIG_SENSORS_HDAPS is not set
    # CONFIG_SENSORS_APPLESMC is not set
    # CONFIG_HWMON_DEBUG_CHIP is not set
    # Multifunction device drivers
    # CONFIG_MFD_SM501 is not set
    # Multimedia devices
    # CONFIG_VIDEO_DEV is not set
    # CONFIG_DVB_CORE is not set
    # CONFIG_DAB is not set
    # Graphics support
    CONFIG_BACKLIGHT_LCD_SUPPORT=y
    CONFIG_LCD_CLASS_DEVICE=m
    CONFIG_BACKLIGHT_CLASS_DEVICE=y
    # CONFIG_BACKLIGHT_PROGEAR is not set
    # Display device support
    CONFIG_DISPLAY_SUPPORT=m
    # Display hardware drivers
    CONFIG_VGASTATE=y
    CONFIG_VIDEO_OUTPUT_CONTROL=m
    CONFIG_FB=y
    # CONFIG_FIRMWARE_EDID is not set
    # CONFIG_FB_DDC is not set
    CONFIG_FB_CFB_FILLRECT=y
    CONFIG_FB_CFB_COPYAREA=y
    CONFIG_FB_CFB_IMAGEBLIT=y
    # CONFIG_FB_SYS_FILLRECT is not set
    # CONFIG_FB_SYS_COPYAREA is not set
    # CONFIG_FB_SYS_IMAGEBLIT is not set
    # CONFIG_FB_SYS_FOPS is not set
    CONFIG_FB_DEFERRED_IO=y
    # CONFIG_FB_SVGALIB is not set
    # CONFIG_FB_MACMODES is not set
    CONFIG_FB_BACKLIGHT=y
    CONFIG_FB_MODE_HELPERS=y
    # CONFIG_FB_TILEBLITTING is not set
    # Frame buffer hardware drivers
    # CONFIG_FB_CIRRUS is not set
    # CONFIG_FB_PM2 is not set
    # CONFIG_FB_CYBER2000 is not set
    # CONFIG_FB_ARC is not set
    # CONFIG_FB_ASILIANT is not set
    # CONFIG_FB_IMSTT is not set
    # CONFIG_FB_VGA16 is not set
    # CONFIG_FB_VESA is not set
    # CONFIG_FB_HECUBA is not set
    # CONFIG_FB_HGA is not set
    # CONFIG_FB_S1D13XXX is not set
    CONFIG_FB_NVIDIA=y
    # CONFIG_FB_NVIDIA_I2C is not set
    # CONFIG_FB_NVIDIA_DEBUG is not set
    CONFIG_FB_NVIDIA_BACKLIGHT=y
    # CONFIG_FB_RIVA is not set
    # CONFIG_FB_LE80578 is not set
    # CONFIG_FB_INTEL is not set
    # CONFIG_FB_MATROX is not set
    # CONFIG_FB_RADEON is not set
    # CONFIG_FB_ATY128 is not set
    # CONFIG_FB_ATY is not set
    # CONFIG_FB_S3 is not set
    # CONFIG_FB_SAVAGE is not set
    # CONFIG_FB_SIS is not set
    # CONFIG_FB_NEOMAGIC is not set
    # CONFIG_FB_KYRO is not set
    # CONFIG_FB_3DFX is not set
    # CONFIG_FB_VOODOO1 is not set
    # CONFIG_FB_VT8623 is not set
    # CONFIG_FB_TRIDENT is not set
    # CONFIG_FB_ARK is not set
    # CONFIG_FB_PM3 is not set
    # CONFIG_FB_GEODE is not set
    # CONFIG_FB_VIRTUAL is not set
    # Console display driver support
    CONFIG_VGA_CONSOLE=y
    CONFIG_VGACON_SOFT_SCROLLBACK=y
    CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=256
    CONFIG_VIDEO_SELECT=y
    CONFIG_DUMMY_CONSOLE=y
    # CONFIG_FRAMEBUFFER_CONSOLE is not set
    CONFIG_LOGO=y
    CONFIG_LOGO_LINUX_MONO=y
    CONFIG_LOGO_LINUX_VGA16=y
    CONFIG_LOGO_LINUX_CLUT224=y
    # Sound
    CONFIG_SOUND=y
    # Advanced Linux Sound Architecture
    CONFIG_SND=y
    CONFIG_SND_TIMER=y
    CONFIG_SND_PCM=y
    # CONFIG_SND_SEQUENCER is not set
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=m
    CONFIG_SND_PCM_OSS=m
    CONFIG_SND_PCM_OSS_PLUGINS=y
    # CONFIG_SND_RTCTIMER is not set
    # CONFIG_SND_DYNAMIC_MINORS is not set
    CONFIG_SND_SUPPORT_OLD_API=y
    CONFIG_SND_VERBOSE_PROCFS=y
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set
    # Generic devices
    CONFIG_SND_AC97_CODEC=y
    # CONFIG_SND_DUMMY is not set
    # CONFIG_SND_MTPAV is not set
    # CONFIG_SND_SERIAL_U16550 is not set
    # CONFIG_SND_MPU401 is not set
    # PCI devices
    # CONFIG_SND_AD1889 is not set
    # CONFIG_SND_ALS300 is not set
    # CONFIG_SND_ALS4000 is not set
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_ATIIXP is not set
    # CONFIG_SND_ATIIXP_MODEM is not set
    # CONFIG_SND_AU8810 is not set
    # CONFIG_SND_AU8820 is not set
    # CONFIG_SND_AU8830 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_BT87X is not set
    # CONFIG_SND_CA0106 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS5530 is not set
    # CONFIG_SND_DARLA20 is not set
    # CONFIG_SND_GINA20 is not set
    # CONFIG_SND_LAYLA20 is not set
    # CONFIG_SND_DARLA24 is not set
    # CONFIG_SND_GINA24 is not set
    # CONFIG_SND_LAYLA24 is not set
    # CONFIG_SND_MONA is not set
    # CONFIG_SND_MIA is not set
    # CONFIG_SND_ECHO3G is not set
    # CONFIG_SND_INDIGO is not set
    # CONFIG_SND_INDIGOIO is not set
    # CONFIG_SND_INDIGODJ is not set
    # CONFIG_SND_EMU10K1 is not set
    # CONFIG_SND_EMU10K1X is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_FM801 is not set
    CONFIG_SND_HDA_INTEL=y
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_HDSPM is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    CONFIG_SND_INTEL8X0=y
    # CONFIG_SND_INTEL8X0M is not set
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_MIXART is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_PCXHR is not set
    # CONFIG_SND_RIPTIDE is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_SONICVIBES is not set
    # CONFIG_SND_TRIDENT is not set
    # CONFIG_SND_VIA82XX is not set
    # CONFIG_SND_VIA82XX_MODEM is not set
    # CONFIG_SND_VX222 is not set
    # CONFIG_SND_YMFPCI is not set
    # CONFIG_SND_AC97_POWER_SAVE is not set
    # USB devices
    # CONFIG_SND_USB_AUDIO is not set
    # CONFIG_SND_USB_USX2Y is not set
    # CONFIG_SND_USB_CAIAQ is not set
    # System on Chip audio support
    # CONFIG_SND_SOC is not set
    # SoC Audio support for SuperH
    # Open Sound System
    CONFIG_SOUND_PRIME=y
    # CONFIG_SOUND_TRIDENT is not set
    # CONFIG_SOUND_MSNDCLAS is not set
    # CONFIG_SOUND_MSNDPIN is not set
    CONFIG_SOUND_OSS=y
    # CONFIG_SOUND_TRACEINIT is not set
    # CONFIG_SOUND_DMAP is not set
    # CONFIG_SOUND_SSCAPE is not set
    # CONFIG_SOUND_VMIDI is not set
    # CONFIG_SOUND_TRIX is not set
    # CONFIG_SOUND_MSS is not set
    # CONFIG_SOUND_MPU401 is not set
    # CONFIG_SOUND_PAS is not set
    # CONFIG_SOUND_PSS is not set
    # CONFIG_SOUND_SB is not set
    # CONFIG_SOUND_YM3812 is not set
    # CONFIG_SOUND_UART6850 is not set
    # CONFIG_SOUND_AEDSP16 is not set
    CONFIG_AC97_BUS=y
    CONFIG_HID_SUPPORT=y
    CONFIG_HID=y
    # CONFIG_HID_DEBUG is not set
    # USB Input Devices
    CONFIG_USB_HID=y
    # CONFIG_USB_HIDINPUT_POWERBOOK is not set
    # CONFIG_HID_FF is not set
    # CONFIG_USB_HIDDEV is not set
    CONFIG_USB_SUPPORT=y
    CONFIG_USB_ARCH_HAS_HCD=y
    CONFIG_USB_ARCH_HAS_OHCI=y
    CONFIG_USB_ARCH_HAS_EHCI=y
    CONFIG_USB=y
    # CONFIG_USB_DEBUG is not set
    # Miscellaneous USB options
    CONFIG_USB_DEVICEFS=y
    # CONFIG_USB_DEVICE_CLASS is not set
    # CONFIG_USB_DYNAMIC_MINORS is not set
    # CONFIG_USB_SUSPEND is not set
    # CONFIG_USB_PERSIST is not set
    # CONFIG_USB_OTG is not set
    # USB Host Controller Drivers
    CONFIG_USB_EHCI_HCD=y
    # CONFIG_USB_EHCI_SPLIT_ISO is not set
    # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
    # CONFIG_USB_EHCI_TT_NEWSCHED is not set
    # CONFIG_USB_ISP116X_HCD is not set
    CONFIG_USB_OHCI_HCD=y
    # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
    # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
    CONFIG_USB_OHCI_LITTLE_ENDIAN=y
    CONFIG_USB_UHCI_HCD=y
    # CONFIG_USB_SL811_HCD is not set
    # CONFIG_USB_R8A66597_HCD is not set
    # USB Device Class drivers
    # CONFIG_USB_ACM is not set
    CONFIG_USB_PRINTER=y
    # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
    # may also be needed; see USB_STORAGE Help for more information
    CONFIG_USB_STORAGE=y
    # CONFIG_USB_STORAGE_DEBUG is not set
    # CONFIG_USB_STORAGE_DATAFAB is not set
    # CONFIG_USB_STORAGE_FREECOM is not set
    # CONFIG_USB_STORAGE_ISD200 is not set
    # CONFIG_USB_STORAGE_DPCM is not set
    # CONFIG_USB_STORAGE_USBAT is not set
    # CONFIG_USB_STORAGE_SDDR09 is not set
    # CONFIG_USB_STORAGE_SDDR55 is not set
    # CONFIG_USB_STORAGE_JUMPSHOT is not set
    # CONFIG_USB_STORAGE_ALAUDA is not set
    # CONFIG_USB_STORAGE_KARMA is not set
    # CONFIG_USB_LIBUSUAL is not set
    # USB Imaging devices
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_MICROTEK is not set
    # CONFIG_USB_MON is not set
    # USB port drivers
    # USB Serial Converter support
    # CONFIG_USB_SERIAL is not set
    # USB Miscellaneous drivers
    # CONFIG_USB_EMI62 is not set
    # CONFIG_USB_EMI26 is not set
    # CONFIG_USB_ADUTUX is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_LEGOTOWER is not set
    # CONFIG_USB_LCD is not set
    CONFIG_USB_BERRY_CHARGE=m
    # CONFIG_USB_LED is not set
    # CONFIG_USB_CYPRESS_CY7C63 is not set
    # CONFIG_USB_CYTHERM is not set
    # CONFIG_USB_PHIDGET is not set
    # CONFIG_USB_IDMOUSE is not set
    # CONFIG_USB_FTDI_ELAN is not set
    # CONFIG_USB_APPLEDISPLAY is not set
    # CONFIG_USB_SISUSBVGA is not set
    # CONFIG_USB_LD is not set
    # CONFIG_USB_TRANCEVIBRATOR is not set
    # CONFIG_USB_IOWARRIOR is not set
    CONFIG_USB_TEST=m
    # USB DSL modem support
    # USB Gadget Support
    # CONFIG_USB_GADGET is not set
    CONFIG_MMC=y
    # CONFIG_MMC_DEBUG is not set
    # CONFIG_MMC_UNSAFE_RESUME is not set
    # MMC/SD Card Drivers
    CONFIG_MMC_BLOCK=y
    CONFIG_MMC_BLOCK_BOUNCE=y
    # MMC/SD Host Controller Drivers
    # CONFIG_MMC_SDHCI is not set
    # CONFIG_MMC_WBSD is not set
    # CONFIG_MMC_TIFM_SD is not set
    # CONFIG_NEW_LEDS is not set
    # CONFIG_INFINIBAND is not set
    # CONFIG_EDAC is not set
    # CONFIG_RTC_CLASS is not set
    # DMA Engine support
    # CONFIG_DMA_ENGINE is not set
    # DMA Clients
    # DMA Devices
    CONFIG_VIRTUALIZATION=y
    CONFIG_KVM=y
    CONFIG_KVM_INTEL=y
    # CONFIG_KVM_AMD is not set
    # Userspace I/O
    # CONFIG_UIO is not set
    # Firmware Drivers
    # CONFIG_EDD is not set
    # CONFIG_DELL_RBU is not set
    # CONFIG_DCDBAS is not set
    CONFIG_DMIID=y
    # File systems
    CONFIG_EXT2_FS=y
    CONFIG_EXT2_FS_XATTR=y
    CONFIG_EXT2_FS_POSIX_ACL=y
    # CONFIG_EXT2_FS_SECURITY is not set
    # CONFIG_EXT2_FS_XIP is not set
    CONFIG_EXT3_FS=y
    CONFIG_EXT3_FS_XATTR=y
    CONFIG_EXT3_FS_POSIX_ACL=y
    # CONFIG_EXT3_FS_SECURITY is not set
    # CONFIG_EXT4DEV_FS is not set
    CONFIG_JBD=y
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=y
    CONFIG_REISERFS_FS=y
    # CONFIG_REISERFS_CHECK is not set
    # CONFIG_REISERFS_PROC_INFO is not set
    CONFIG_REISERFS_FS_XATTR=y
    CONFIG_REISERFS_FS_POSIX_ACL=y
    # CONFIG_REISERFS_FS_SECURITY is not set
    CONFIG_JFS_FS=m
    # CONFIG_JFS_POSIX_ACL is not set
    # CONFIG_JFS_SECURITY is not set
    # CONFIG_JFS_DEBUG is not set
    # CONFIG_JFS_STATISTICS is not set
    CONFIG_FS_POSIX_ACL=y
    CONFIG_XFS_FS=m
    # CONFIG_XFS_QUOTA is not set
    # CONFIG_XFS_SECURITY is not set
    # CONFIG_XFS_POSIX_ACL is not set
    # CONFIG_XFS_RT is not set
    # CONFIG_GFS2_FS is not set
    # CONFIG_OCFS2_FS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    CONFIG_INOTIFY=y
    CONFIG_INOTIFY_USER=y
    # CONFIG_QUOTA is not set
    CONFIG_DNOTIFY=y
    # CONFIG_AUTOFS_FS is not set
    CONFIG_AUTOFS4_FS=y
    # CONFIG_FUSE_FS is not set
    CONFIG_GENERIC_ACL=y
    # CD-ROM/DVD Filesystems
    CONFIG_ISO9660_FS=y
    CONFIG_JOLIET=y
    # CONFIG_ZISOFS is not set
    CONFIG_UDF_FS=y
    CONFIG_UDF_NLS=y
    # DOS/FAT/NT Filesystems
    CONFIG_FAT_FS=y
    CONFIG_MSDOS_FS=y
    CONFIG_VFAT_FS=y
    CONFIG_FAT_DEFAULT_CODEPAGE=437
    CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
    CONFIG_NTFS_FS=y
    # CONFIG_NTFS_DEBUG is not set
    CONFIG_NTFS_RW=y
    # Pseudo filesystems
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_PROC_SYSCTL=y
    CONFIG_SYSFS=y
    CONFIG_TMPFS=y
    CONFIG_TMPFS_POSIX_ACL=y
    CONFIG_HUGETLBFS=y
    CONFIG_HUGETLB_PAGE=y
    CONFIG_RAMFS=y
    # CONFIG_CONFIGFS_FS is not set
    # Miscellaneous filesystems
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    # CONFIG_HFS_FS is not set
    # CONFIG_HFSPLUS_FS is not set
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set
    # Network File Systems
    CONFIG_NFS_FS=y
    CONFIG_NFS_V3=y
    # CONFIG_NFS_V3_ACL is not set
    # CONFIG_NFS_V4 is not set
    # CONFIG_NFS_DIRECTIO is not set
    CONFIG_NFSD=y
    CONFIG_NFSD_V3=y
    # CONFIG_NFSD_V3_ACL is not set
    # CONFIG_NFSD_V4 is not set
    CONFIG_NFSD_TCP=y
    CONFIG_ROOT_NFS=y
    CONFIG_LOCKD=y
    CONFIG_LOCKD_V4=y
    CONFIG_EXPORTFS=y
    CONFIG_NFS_COMMON=y
    CONFIG_SUNRPC=y
    # CONFIG_SUNRPC_BIND34 is not set
    # CONFIG_RPCSEC_GSS_KRB5 is not set
    # CONFIG_RPCSEC_GSS_SPKM3 is not set
    # CONFIG_SMB_FS is not set
    # CONFIG_CIFS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_AFS_FS is not set
    # Partition Types
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y
    # Native Language Support
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-1"
    CONFIG_NLS_CODEPAGE_437=y
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    # CONFIG_NLS_CODEPAGE_850 is not set
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    CONFIG_NLS_CODEPAGE_860=y
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    CONFIG_NLS_ASCII=y
    CONFIG_NLS_ISO8859_1=y
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    CONFIG_NLS_ISO8859_15=y
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    CONFIG_NLS_UTF8=y
    # Distributed Lock Manager
    # CONFIG_DLM is not set
    # Instrumentation Support
    CONFIG_PROFILING=y
    CONFIG_OPROFILE=y
    CONFIG_KPROBES=y
    # Kernel hacking
    CONFIG_TRACE_IRQFLAGS_SUPPORT=y
    # CONFIG_PRINTK_TIME is not set
    # CONFIG_ENABLE_MUST_CHECK is not set
    # CONFIG_MAGIC_SYSRQ is not set
    # CONFIG_UNUSED_SYMBOLS is not set
    # CONFIG_DEBUG_FS is not set
    # CONFIG_HEADERS_CHECK is not set
    CONFIG_DEBUG_KERNEL=y
    # CONFIG_DEBUG_SHIRQ is not set
    CONFIG_DETECT_SOFTLOCKUP=y
    # CONFIG_SCHED_DEBUG is not set
    # CONFIG_SCHEDSTATS is not set
    CONFIG_TIMER_STATS=y
    # CONFIG_DEBUG_SLAB is not set
    # CONFIG_DEBUG_RT_MUTEXES is not set
    # CONFIG_RT_MUTEX_TESTER is not set
    # CONFIG_DEBUG_SPINLOCK is not set
    # CONFIG_DEBUG_MUTEXES is not set
    # CONFIG_DEBUG_LOCK_ALLOC is not set
    # CONFIG_PROVE_LOCKING is not set

    Hi esimpsoneditor-
    In order to troubleshoot this thing properly you should eliminate every external peripheral that you possibly can and see if the machine works.
    If you think the Dlink adapters are a cause why not remove them each night before leaving or better yet connect to the internet for a while via a hard-wired ethernet connection and see what happens.
    Luck-
    -DP

  • Troubleshoot recent overheating + immediate shutdowns (hard/software?)

    Since last Friday, I've been experiencing frequent, instant shutdowns due to overheating. I've had these occur before, but generally when running intensive computations in R. I'd initiate a script at bedtime, and wake up to find my computer off (shut down in the night). I learned to put a small book under it, run a fan next to it, or literally place it on it's side, resting on the non-fan edge and the lid to expose the whole bottom to "breathe." Recently, however, I have incessant, unexpected, immediate shutdowns during "normal use" (terminal, browser with, say, 4-10 non-video-playing tabs open), or even just updating with pacman.
    Unfortunately, use of some proprietary software along with needing some IE-specific sites at work had me in Windows 7 for ~1.5 weeks non-stop. This is really unusual for me, and I prefer to live in Arch as much as possible. Because of this, I didn't get to notice if this would have gradually increased in frequency or started abruptly. The behavior is drastically and noticeably different than anything I've experienced, completely kills the use of Linux for me, and I'd really like to identify if this is something to do with software, or if I'm experiencing a hardware failure of some sort (loose thermal gel?). I did a mess of trials this weekend, with results below. Thanks for any input or suggestions.
    System details
    - HP 8540w workstation
    - Intel i7 Q720 (4 physical cores, 8 virtual)
    - Nvidia Quadro FX 1800M
    - Using nvidia (334.21-4), nvidia-utils (334.21-4), nvidia-libgl (334.21-7)
    - Relevant BIOS options (as far as I can tell):
    --- Multi-core: turns off all physical cores other than the first
    --- Intel HT Technology: hyperthreading support (appears to turn off all virtual/hyperthreaded cores)
    --- Virtualization (unsure if relevant, but affects dmesg output for kvm abilities)
    $ uname -a
    Linux bigBang 3.14.0-5-ARCH #1 SMP PREEMPT Fri Apr 11 21:02:33 CEST 2014 x86_64 GNU/Linux
    $ sudo cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
    ondemand # same for all other cpus, 1-7
    I have acpi installed, but not acpid, laptop tools, cpupower, or others mentioned in the power management or CPU frequency scaling Wiki articles.
    Edit: Oops! I caught that I actually did have cpupower installed, from way back in 2012, and removed it last night. I don't recall ever setting it up, and issuing `locate cpupower` now that it's gone doesn't get any hits, so I'm thinking this means I never created a config file for it (which would have yielded, I think, a file.pacsave upon removal). Sorry for the mixup!
    Assume everything else is "stock" (in other words, no kernel options appended, etc.). This is pretty much a "vanilla" Arch system other than the applications I've installed. Feel free to ask follow up questions if I've missed something relevant.
    System messages
    Here are examples of the errors I'm seeing:
    $ dmesg | grep -i mce
    [ 0.040954] mce: CPU supports 9 MCE banks
    [18912.069281] mce: [Hardware Error]: Machine check events logged
    [19662.531507] mce: [Hardware Error]: Machine check events logged
    [20112.808818] mce: [Hardware Error]: Machine check events logged
    $ dmesg | grep -i temper
    [ 367.990859] CPU6: Core temperature above threshold, cpu clock throttled (total events = 1)
    [ 367.990862] CPU7: Core temperature above threshold, cpu clock throttled (total events = 1)
    [ 367.991919] CPU6: Core temperature/speed normal
    [ 367.991922] CPU7: Core temperature/speed normal
    [ 668.175622] CPU6: Core temperature above threshold, cpu clock throttled (total events = 508)
    [ 668.175623] CPU7: Core temperature above threshold, cpu clock throttled (total events = 508)
    [ 668.176683] CPU6: Core temperature/speed normal
    [ 668.176685] CPU7: Core temperature/speed normal
    Here are my limits, per lm_sensors:
    $ sensors
    coretemp-isa-0000
    Adapter: ISA adapter
    Core 0: +57.0°C (high = +84.0°C, crit = +100.0°C)
    Core 1: +57.0°C (high = +84.0°C, crit = +100.0°C)
    Core 2: +57.0°C (high = +84.0°C, crit = +100.0°C)
    Core 3: +57.0°C (high = +84.0°C, crit = +100.0°C)
    I installed the mcelog package, which shows messages like this:
    Hardware event. This is not a software error.
    Apr 14 21:36:50 bigBang mcelog[10019]: MCE 0
    Apr 14 21:36:50 bigBang mcelog[10019]: CPU 5 THERMAL EVENT TSC 1b184fe88d88
    Apr 14 21:36:50 bigBang mcelog[10019]: TIME 1397511379 Mon Apr 14 16:36:19 2014
    Apr 14 21:36:50 bigBang mcelog[10019]: Processor 5 heated above trip temperature. Throttling enabled.
    Apr 14 21:36:50 bigBang mcelog[10019]: Please check your system cooling. Performance will be impacted
    Apr 14 21:36:50 bigBang mcelog[10019]: STATUS 880003c3 MCGSTATUS 0
    Apr 14 21:36:50 bigBang mcelog[10019]: MCGCAP 1c09 APICID 5 SOCKETID 0
    Apr 14 21:36:50 bigBang mcelog[10019]: CPUID Vendor Intel Family 6 Model 30
    Apr 14 21:36:50 bigBang mcelog[10019]: Hardware event. This is not a software error.
    Apr 14 21:36:50 bigBang mcelog[10019]: MCE 1
    Apr 14 21:36:50 bigBang mcelog[10019]: CPU 4 THERMAL EVENT TSC 1b184fe8a5da
    Apr 14 21:36:50 bigBang mcelog[10019]: TIME 1397511379 Mon Apr 14 16:36:19 2014
    Apr 14 21:36:50 bigBang mcelog[10019]: Processor 4 heated above trip temperature. Throttling enabled.
    Apr 14 21:36:50 bigBang mcelog[10019]: Please check your system cooling. Performance will be impacted
    Apr 14 21:36:50 bigBang mcelog[10019]: STATUS 880003c3 MCGSTATUS 0
    Apr 14 21:36:50 bigBang mcelog[10019]: MCGCAP 1c09 APICID 4 SOCKETID 0
    Apr 14 21:36:50 bigBang mcelog[10019]: CPUID Vendor Intel Family 6 Model 30
    Apr 14 21:36:50 bigBang mcelog[10019]: Hardware event. This is not a software error.
    Method
    In updating my AUR-built packages, I got repeated shutdowns when trying to build pandoc-static, a pretty compiling-heavy package. I googled around quite a bit about thermal events, with nothing conclusively sticking out as the solution. Honestly, it reduced to trying pcie_aspm=0 or pcie_aspm=force -- that's really about all I could find! I thought I would try various things and log the temperature and frequency while trying to build pandoc-static. Here was my final summary of trials conducted:
    Key:
    - bios virt: "Virtualization Technology" turned on in BIOS?
    - bios multi: "Multi-Core" turned on in BIOS?
    - intel ht: "Intel HT Technology" turned on in BIOS?
    - X: started X with `startx` or run from TTY1?
    - cores: which CPUs were active (as per the scheme in /sys/devices/system/cpu/cpu*)?
    - success: did pandoc-static build successfully (1), or did the machine hard kill itself (0)?
    | log id | kernel | pcie_aspm | bios virt | bios multi | intel ht | X? | cores | success? | note |
    |--------+----------+-----------------+-----------+------------+----------+----+---------------+----------+-----------------------|
    | 4 | 3.14.0-5 | default | 1 | 1 | 1 | 1 | [0-5] | 1 | |
    | 5 | 3.14.0-5 | pcie_aspm=0 | 1 | 1 | 1 | 1 | all | 0 | |
    | 6 | 3.14.0-5 | pcie_aspm=force | 1 | 1 | 1 | 1 | all | 0 | |
    | 7 | 3.14.0-5 | default | 1 | 1 | 1 | 1 | all | 1 | |
    | 8 | 3.14.0-5 | default | 1 | 1 | 1 | 1 | 0, 2, 4, 6 | 0 | |
    | 9 | 3.14.0-5 | default | 1 | 1 | 1 | 1 | 0, 1, 3, 5, 7 | 0 | can't turn off core 0 |
    | 10 | 3.14.0-5 | default | 1 | 1 | 1 | 1 | [0-5] | 1 | replicate (4) |
    | 11 | 3.10.36 | default | 1 | 1 | 1 | 1 | all | 0 | |
    | 12 | 3.14.0-5 | default | 1 | 1 | 1 | 0 | all | 0 | |
    | 13 | 3.14.0-5 | default | 0 | 1 | 1 | 1 | all | 0 | |
    | 14 | 3.14.0-5 | default | 0 | 0 | 1 | 1 | 0-1 | 1 | |
    | 15 | 3.14.0-5 | default | 0 | 1 | 0 | 1 | 0-3 | 0 | |
    | 16 | 3.10.36 | default | 1 | 1 | 1 | 0 | all | 0 | |
    | 17 | 3.14.0-5 | default | 1 | 1 | 1 | 1 | all | 0 | |
    | 18 | 3.14.0-5 | default | 1 | 1 | 1 | 1 | [0-5] | 1 | replicate (4) |
    For instances where only certain cores were enabled, the following method was used:
    # echo 0 > /sys/devices/system/cpu/cpu6/online
    The effect was verified in the output of dmesg for each core:
    [ 2024.174235] kvm: disabling virtualization on CPU6
    [ 2030.187053] kvm: disabling virtualization on CPU7
    I tried a couple without X to rule out an Nvidia issue, as I also have a recent issue of closing my lid not suspending anymore. This is apparently an Nvidia issue, so I thought I'd at least try to rule it out. I threw in the LTS kernel just to see if I noticed any differences (I didn't).
    In each case, I used the following procedure:
    - Fresh boot
    - Open one instance of urxvt with three tabs (or three TTYs if running one of the two non-X trials)
    - run a cpu-logging script as root in one tab, a dmesg logging script from a regular user tab, and `yaourt pandoc-static` from a third tab
    - if the machine hard killed, move on. If not, stop the logger, reboot, and start over (applying any BIOS changes when necessary)
    All trials except 16, 17, and 18 were run at my house in the dining room, with the laptop resting on a small book (not obscuring the fan ports underneath). The last three were run today at work, and I put a similarly sized book under the laptop to try and replicate conditions reasonably well.
    I wrote a kludgy script (I'm no bash guy...) to collect the data in csv format. It's called by another script (not shown) that runs a continuous while loop every 10 seconds.
    #!/bin/sh
    temp0=`sensors | grep "Core 0" | awk '{print $3}' | sed s/"+"// | sed s/"°C"//`
    temp1=`sensors | grep "Core 1" | awk '{print $3}' | sed s/"+"// | sed s/"°C"//`
    temp2=`sensors | grep "Core 2" | awk '{print $3}' | sed s/"+"// | sed s/"°C"//`
    temp3=`sensors | grep "Core 3" | awk '{print $3}' | sed s/"+"// | sed s/"°C"//`
    for i in 0 1 2 3 4 5 6 7
    do
    eval cpu$i=`cat /sys/devices/system/cpu/cpu$i/cpufreq/cpuinfo_cur_freq`
    done
    time=`date +%H:%M:%S`
    top=`ps aux | awk '{print $11, $3}' | sort -k2rn | head -n 3`
    top=`echo $top | sed s/" "/", "/g`
    echo "$time, $temp0, $temp1, $temp2, $temp3, $cpu0, $cpu1, $cpu2, $cpu3, $cpu4, $cpu5, $cpu6, $cpu7, $top" >> /home/jwhendy/temp-freq.log
    I also output the results of `dmesg | grep -i mce` and `dmesg | grep -i temper` to two separate files every 10 seconds.
    Results
    The result of most interest came when I noticed that it was always cpu6 and cpu7 that showed up in dmesg logs. I found the trick above about disabling specific cores, and decided to try it... the build succeeded! I replicated this effect three different times, which I find significant given that almost nothing else succeeded.
    I used R and the ggplot2 package to plot the results, and here are two replicates of "default" Arch 3.14.0 (no changes) vs. the three runs in which I've disabled cores 6-7:
    Note the absence of the rapid spikes > 90C, which are entirely the blue lines in the left two plots. That color is for the "Core 3" temperature reported by lm_sensors (fourth core), which I take it is responsible for cpu6 and cpu7. Subjectively, I noticed that the laptop ran with much lower fan speeds, they kicked in later in the build, and simply ran less with cpu6/7 off. Frequencies appear to jump around with both, showing a pretty even spread of them cycling. The plots don't make it very clear, but the first default run succeeded, while the second one hard shutdown. Again, all three with cpu6/7 off succeeded.
    Discussion
    Case closed? Is this definitely a hardware issue? I'm still not sure, and that's where I'd like some assistance. Having replicated three successes with cpu6 and cpu7 off, I felt pretty confident. But from my current boot (with cpu6/7 off), I checked dmesg after running rsync for a couple hours catching up on backups!
    [18661.079071] CPU4: Core temperature above threshold, cpu clock throttled (total events = 1)
    [18661.079072] CPU5: Core temperature above threshold, cpu clock throttled (total events = 1)
    [18661.080133] CPU4: Core temperature/speed normal
    [18661.080135] CPU5: Core temperature/speed normal
    [19598.570458] CPU5: Core temperature above threshold, cpu clock throttled (total events = 182)
    [19598.570459] CPU4: Core temperature above threshold, cpu clock throttled (total events = 182)
    [19598.571517] CPU4: Core temperature/speed normal
    [19598.571520] CPU5: Core temperature/speed normal
    [20015.016963] CPU4: Core temperature above threshold, cpu clock throttled (total events = 221)
    [20015.016965] CPU5: Core temperature above threshold, cpu clock throttled (total events = 221)
    [20015.019037] CPU4: Core temperature/speed normal
    [20015.019040] CPU5: Core temperature/speed normal
    Also, note that run #15 above (disabling hyperthreading in BIOS) turns off cpu4-7, however the dmesg temp logs show that cpu3 was reporting temperature overages and that trial resulted in a hard shutdown. I'm not confident in how the system numbers the cpus (cpu0 and cpu1 are the hyperthreads for the first physical core? Is this always the case?). If numbering is consistent and this means that cpu6 and cpu7 are both hyperthreads of two different cores, this is also perplexing, since runs #8 and #9 turned off odd and even (respectively) cores yet saw no improvement. Both reported one of the suspect cpus (6 for even run, 7 for the odd), and both hard killed, #8 before it could even log any high spikes.
    - Here's a plot of those two runs
    There's also the issue that this never happens on Windows, or at least the forced shutdowns don't occur. Perhaps there are warnings or logs somewhere showing the same issue, but it's controlling the issue somehow. I'd love suggestions to check; if there aren't any errors reported, that shifts the evidence back to a potential software issue.
    Lastly, mcelog says flat out "This is not a software error." Now, I hear that... but I don't understand why changing which hyperthreads are online should change which cores overheat (always the highest numbered one). Or, say, could disabling those cores just disable the associated temperature sensor and it's still just as hot in that area, but it's not being measured/reported?
    For now, turning off cpu6 and cpu7 at least gives me a system that doesn't die on me with every action, so Arch remains usable. I've read a bunch of posts on this that frankly aren't much help. They range in content from "One cpu is ~10C higher than others" (to which people say, "Don't worry about it") to advice to simply go in an manually change the cpu temperature threshold values (seems like a horrible idea to me), to aspm fiddling (which seems like it was supposedly fixed in Linux 3.0+ if not before), and changing governors (I'm on ondemand, not performance, which seems reasonable).
    I typed a lot above, and that's because I would like the best chance I have to know what this is related to. Alright, 'nuff of the problem. Onto the solution. Many thanks for reading, and any assistance/suggestions you can provide.
    Last edited by jwhendy (2014-04-15 16:08:56)

    @ewaller: thanks for the feedback! Yeah, this was one of my more obsessive ones for sure. I admit that data collection and analysis is both a part of my job, and a hobby
    Re. Windows: subjectively, I think Windows runs with the fan much less (but always has, not a recent thing). It's also much slower and far less responsive (issue something like alt+tab to change windows and wait 1-3 full seconds for it to catch up). I could run something intensive in Win7 and check the logs to see if anything similar shows up (could Win7 just be controlling it somehow?). What surprises me is that Arch is catching that the cpus are over critical and throttling them, but they seem to spike so fast from ~80C to 100C that it can't do anything but hard kill.
    Re. hardware: thanks for your take. I plan to take this apart and brush/blow any dust out, so I'll take a look while I'm in there for anything obviously loose or weird.
    Re. what's changed: I've wondered that myself and am just drawing a blank. I tried to check for over-temp reports in journalctl, but unfortunately, have SystemMaxUse=250M in /etc/systemd/journald.conf. It appears that all of my experiments this weekend purged older entries, so journalctl starts at 2014-04-12 -- bummer. Still, I haven't changed anything major that I'm aware of. Just booted up, started doing normal stuff (updating packages, chromium, etc.), and I noticed the fan ramp up like crazy. Then that horrid "peeew" sound when the computer kills itself. Thought it was a fluke, but happened again and again.
    Re. pacman logs: here's my pacman log for what I think is a relevant period. Prior to 2014-04-09, the previous entry was 2014-03-31 (that period was the living-in-Windows time I mentioned). I omitted some more recent entries since the problem was already present as of Apr 09-10, and a majority of more recent entries are related to trying to get nouveau to work with acceleration (lots of installing/un-installing nvidia/nouveau to troubleshoot that issue -- in progress!).
    [2014-04-09 17:48] [PACMAN] Running 'pacman -Syu'
    [2014-04-09 17:48] [PACMAN] synchronizing package lists
    [2014-04-09 17:48] [PACMAN] starting full system upgrade
    [2014-04-09 17:54] [PACMAN] upgraded apr-util (1.5.3-3 -> 1.5.3-4)
    [2014-04-09 17:54] [PACMAN] upgraded readline (6.3-3 -> 6.3.003-2)
    [2014-04-09 17:54] [PACMAN] upgraded bash (4.3-3 -> 4.3.008-2)
    [2014-04-09 17:54] [PACMAN] upgraded boost-libs (1.55.0-4 -> 1.55.0-5)
    [2014-04-09 17:54] [PACMAN] upgraded openssl (1.0.1.f-2 -> 1.0.1.g-1)
    [2014-04-09 17:54] [PACMAN] upgraded ca-certificates (20140223-2 -> 20140325-1)
    [2014-04-09 17:54] [PACMAN] upgraded cpupower (3.13-2 -> 3.14-1)
    [2014-04-09 17:54] [PACMAN] upgraded cups-filters (1.0.50-1 -> 1.0.52-1)
    [2014-04-09 17:54] [PACMAN] installed libavc1394 (0.5.4-2)
    [2014-04-09 17:54] [PACMAN] installed libiec61883 (1.2.0-4)
    [2014-04-09 17:54] [PACMAN] installed gstreamer0.10-good-plugins (0.10.31-5)
    [2014-04-09 17:54] [PACMAN] upgraded farstream-0.1 (0.1.2-3 -> 0.1.2-4)
    [2014-04-09 17:54] [PACMAN] upgraded fftw (3.3.3-2 -> 3.3.4-1)
    [2014-04-09 17:54] [PACMAN] upgraded sqlite (3.8.4.2-1 -> 3.8.4.3-1)
    [2014-04-09 17:54] [PACMAN] upgraded nss (3.15.5-2 -> 3.16-1)
    [2014-04-09 17:54] [PACMAN] upgraded flashplugin (11.2.202.346-1 -> 11.2.202.350-1)
    [2014-04-09 17:54] [PACMAN] upgraded ghostscript (9.10-3 -> 9.14-1)
    [2014-04-09 17:54] [PACMAN] upgraded gnutls (3.2.12.1-1 -> 3.2.13-1)
    [2014-04-09 17:54] [PACMAN] upgraded groff (1.22.2-5 -> 1.22.2-6)
    [2014-04-09 17:54] [PACMAN] upgraded hplip (3.14.3-2 -> 3.14.4-1)
    [2014-04-09 17:55] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2014-04-09 17:55] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2014-04-09 17:55] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2014-04-09 17:55] [ALPM-SCRIPTLET] ==> Starting build: 3.13.8-1-ARCH
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-04-09 17:55] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2014-04-09 17:55] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-04-09 17:55] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2014-04-09 17:55] [ALPM-SCRIPTLET] ==> Starting build: 3.13.8-1-ARCH
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2014-04-09 17:55] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2014-04-09 17:55] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-04-09 17:55] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2014-04-09 17:55] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-04-09 17:55] [PACMAN] upgraded linux (3.13.7-1 -> 3.13.8-1)
    [2014-04-09 17:55] [PACMAN] upgraded linux-headers (3.13.7-1 -> 3.13.8-1)
    [2014-04-09 17:55] [PACMAN] upgraded man-pages (3.63-1 -> 3.64-1)
    [2014-04-09 17:55] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2014-04-09 17:55] [PACMAN] upgraded pacman-mirrorlist (20140107-1 -> 20140405-1)
    [2014-04-09 17:55] [PACMAN] upgraded python2-numpy (1.8.0-3 -> 1.8.1-1)
    [2014-04-09 17:55] [PACMAN] upgraded r (3.0.2-2 -> 3.0.3-1)
    [2014-04-09 17:55] [PACMAN] upgraded xorg-xauth (1.0.8-1 -> 1.0.9-1)
    [2014-04-09 17:55] [PACMAN] upgraded yajl (2.0.4-2 -> 2.1.0-1)
    [2014-04-09 18:03] [PACMAN] Running 'pacman --color auto -Sy'
    [2014-04-09 18:03] [PACMAN] synchronizing package lists
    [2014-04-10 13:45] [PACMAN] Running 'pacman --color auto -Sy'
    [2014-04-10 13:45] [PACMAN] synchronizing package lists
    [2014-04-10 13:45] [PACMAN] Running 'pacman -Syu'
    [2014-04-10 13:45] [PACMAN] synchronizing package lists
    [2014-04-10 13:45] [PACMAN] starting full system upgrade
    [2014-04-10 13:46] [PACMAN] upgraded kmod (16-1 -> 17-1)
    [2014-04-10 13:46] [PACMAN] upgraded libsystemd (212-1 -> 212-2)
    [2014-04-10 13:46] [PACMAN] upgraded coreutils (8.22-3 -> 8.22-4)
    [2014-04-10 13:46] [PACMAN] upgraded libutil-linux (2.24.1-4 -> 2.24.1-6)
    [2014-04-10 13:46] [PACMAN] upgraded util-linux (2.24.1-4 -> 2.24.1-6)
    [2014-04-10 13:46] [PACMAN] upgraded systemd (212-1 -> 212-2)
    [2014-04-10 13:46] [PACMAN] upgraded chromium (33.0.1750.152-1 -> 34.0.1847.116-1)
    [2014-04-10 13:46] [PACMAN] upgraded x265 (0.8-2 -> 0.9-1)
    [2014-04-10 13:46] [PACMAN] upgraded ffmpeg (1:2.2-2 -> 1:2.2-3)
    [2014-04-10 13:47] [PACMAN] upgraded git (1.9.1-1 -> 1.9.2-1)
    [2014-04-10 13:47] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2014-04-10 13:47] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2014-04-10 13:47] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2014-04-10 13:47] [ALPM-SCRIPTLET] ==> Starting build: 3.14.0-4-ARCH
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-04-10 13:47] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2014-04-10 13:47] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-04-10 13:47] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2014-04-10 13:47] [ALPM-SCRIPTLET] ==> Starting build: 3.14.0-4-ARCH
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2014-04-10 13:47] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2014-04-10 13:47] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-04-10 13:47] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2014-04-10 13:48] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-04-10 13:48] [PACMAN] upgraded linux (3.13.8-1 -> 3.14-4)
    [2014-04-10 13:48] [PACMAN] upgraded linux-headers (3.13.8-1 -> 3.14-4)
    [2014-04-10 13:48] [PACMAN] upgraded lirc-utils (1:0.9.0-70 -> 1:0.9.0-71)
    [2014-04-10 13:48] [PACMAN] upgraded nvidia (334.21-2 -> 334.21-4)
    [2014-04-10 13:48] [PACMAN] upgraded systemd-sysvcompat (212-1 -> 212-2)
    [2014-04-10 13:51] [PACMAN] Running 'pacman -Syu'
    [2014-04-10 13:51] [PACMAN] synchronizing package lists
    [2014-04-10 13:51] [PACMAN] starting full system upgrade
    [2014-04-10 13:51] [PACMAN] Running 'pacman -Sc'
    [2014-04-10 14:16] [PACMAN] Running 'pacman --color auto -Sy'
    [2014-04-10 14:16] [PACMAN] synchronizing package lists
    [2014-04-10 14:21] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-jwhendy/PKGDEST.K0M/chromium-libpdf-1:34.0.1847.116-1-x86_64.pkg.tar.xz'
    [2014-04-10 14:21] [PACMAN] upgraded chromium-libpdf (1:33.0.1750.149-1 -> 1:34.0.1847.116-1)
    [2014-04-10 14:26] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-jwhendy/PKGDEST.R9f/dropbox-2.6.25-1-x86_64.pkg.tar.xz'
    [2014-04-10 14:26] [PACMAN] upgraded dropbox (2.6.13-1 -> 2.6.25-1)
    [2014-04-10 15:41] [PACMAN] Running 'pacman -Syu'
    [2014-04-10 15:41] [PACMAN] synchronizing package lists
    [2014-04-10 15:41] [PACMAN] Running 'pacman --color auto -Sy'
    [2014-04-10 15:41] [PACMAN] synchronizing package lists
    [2014-04-10 15:43] [PACMAN] Running 'pacman --color auto -S -u'
    [2014-04-10 15:43] [PACMAN] starting full system upgrade
    [2014-04-10 15:43] [PACMAN] upgraded libjpeg-turbo (1.3.0-4 -> 1.3.1-1)
    [2014-04-10 15:43] [PACMAN] upgraded mpd (0.18.9-1 -> 0.18.10-1)
    [2014-04-10 15:43] [PACMAN] upgraded python2-urwid (1.2.0-2 -> 1.2.1-1)
    [2014-04-10 15:43] [PACMAN] Running 'pacman --color auto -S --asdeps --needed extra/itstool'
    [2014-04-10 15:44] [PACMAN] installed itstool (2.0.2-1)
    [2014-04-10 15:53] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-jwhendy/PKGDEST.Ikd/evince-gtk-3.12.0-1-x86_64.pkg.tar.xz'
    [2014-04-10 15:53] [PACMAN] upgraded evince-gtk (3.10.3-1 -> 3.12.0-1)
    [2014-04-10 16:08] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-jwhendy/PKGDEST.7Bs/jdk-8u0-1-x86_64.pkg.tar.xz'
    [2014-04-10 16:11] [PACMAN] Running 'pacman -S lm_sensors'
    [2014-04-10 16:12] [ALPM-SCRIPTLET] ==> Updating desktop MIME database...
    [2014-04-10 16:12] [ALPM-SCRIPTLET] ==> Updating MIME database...
    [2014-04-10 16:12] [ALPM-SCRIPTLET] ==> Updating icon cache...
    [2014-04-10 16:12] [PACMAN] upgraded jdk (7.51-1 -> 8u0-1)
    [2014-04-10 16:12] [PACMAN] Running 'pacman --color auto -S --asdeps --needed extra/cabal-install extra/ghc community/alex community/happy'
    [2014-04-10 16:13] [PACMAN] installed cabal-install (1.18.0.2-1)
    [2014-04-10 16:13] [PACMAN] installed ghc (7.6.3-1)
    [2014-04-10 16:13] [PACMAN] installed alex (3.1.3-1)
    [2014-04-10 16:13] [PACMAN] installed happy (1.19.3-1)
    [2014-04-10 16:14] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-jwhendy/PKGDEST.DcA/zukitwo-themes-20140329-1-any.pkg.tar.xz'
    [2014-04-10 16:14] [PACMAN] upgraded zukitwo-themes (20131210-1 -> 20140329-1)
    [2014-04-10 16:14] [PACMAN] Running 'pacman -Syu'
    [2014-04-10 16:14] [PACMAN] synchronizing package lists
    [2014-04-10 16:15] [PACMAN] starting full system upgrade
    [2014-04-10 16:16] [PACMAN] Running 'pacman -Rsc itstool happy ghc alex cabal-install'
    [2014-04-10 16:16] [PACMAN] removed cabal-install (1.18.0.2-1)
    [2014-04-10 16:16] [PACMAN] removed alex (3.1.3-1)
    [2014-04-10 16:16] [PACMAN] removed ghc (7.6.3-1)
    [2014-04-10 16:16] [PACMAN] removed happy (1.19.3-1)
    [2014-04-10 16:16] [PACMAN] removed itstool (2.0.2-1)
    [2014-04-10 17:40] [PACMAN] Running 'pacman -Rsc gnome-themes-standard unixobdc'
    [2014-04-10 17:40] [PACMAN] Running 'pacman -Rsc gnome-themes-standard unixodbc'
    [2014-04-10 17:40] [PACMAN] removed unixodbc (2.3.2-1)
    [2014-04-10 17:40] [PACMAN] removed gnome-themes-standard (3.10.0-1)
    [2014-04-10 17:40] [PACMAN] removed cantarell-fonts (0.0.15-1)
    [2014-04-10 17:40] [PACMAN] Running 'pacman -Sc'
    [2014-04-11 12:51] [PACMAN] Running 'pacman -S gnome-themes-standard'
    [2014-04-11 12:52] [PACMAN] installed cantarell-fonts (0.0.15-1)
    [2014-04-11 12:52] [PACMAN] installed gnome-themes-standard (3.10.0-1)
    I found a post about the graphics driver affecting the laptop temperature, which is prompting me to re-run the test above with nouveau. Unfortunately, I can't startx without noaccel=1 and I get horrible performance with this.The solution there was to use the kernel option `radeon.dpm=1`, which for nvidia appears to be to use DPMS, which I seem to have, so perhaps that isn't relevant/related?
    $ grep -i dpms /var/log/Xorg.0.log
    [ 52.969] Initializing built-in extension DPMS
    [ 56.794] (==) NVIDIA(0): DPMS enabled
    While I was looking for how far back the overheating went, I also stumbled across some other errors in journalctl like this:
    Apr 15 08:10:07 bigBang kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Apr 15 08:10:07 bigBang kernel: ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
    Apr 15 08:10:07 bigBang kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Apr 15 08:10:07 bigBang kernel: ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
    Apr 15 08:10:07 bigBang kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Apr 15 08:10:07 bigBang kernel: ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20131218/utaddress-258)
    Apr 15 08:10:07 bigBang kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    Apr 15 08:10:07 bigBang kernel: ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMIO) (20131218/utaddress-258)
    This post mentions a similar warning, but doesn't really get resolved. Here's another bug about that, which is both recent and also unresolved (active). The bug, however, says nothing about what effect it actually has! I'm not sure if there's anything undesirable about it other than an ugly warning...
    Action items for me
    - Try with nouveau (X and no-X)
    - I'll be trying one of these utilities on Windows 7 shortly to see if the cpu temp is reported there.
    Thanks again for the response/suggestions!

  • Kext causing kernel panic? Need help troubleshooting, please.

    Hello all,
    I'm a new face here and have been fortunate enough to never really need support, however at this point, I'm completely lost. First of all I want to apologize if my English is bad, Swedish is my native language.
    My specs:
    MBP 5,1 (late 2008) 15.4"
    CPU: Intel Core 2 Duo 2,53 GHz
    Memory: Apple native 4GB
    Boot ROM Version: MBP51.007E.B05
    System Version: Mac OS X 10.7.2 (11C74) Lion
    Kernel Version: Darwin 11.2.0
    SATA HDD: ST9250410AS Seagate Momentus 7200RPM 250GB
    I have a very annoying problem that I dont know how to solve. When I try to boot my MBP normally I get kernel panic before getting to the login-screen. The kernel panic occurs 1-2 minutes into loading while the gray Apple-logo still is on screen.
    Booting in safe mode works just fine (wifi, wired network and other critical os x functions works - While gfx-, audio-, spotlight-, etc. kexts are disabled). This problem occurred a few months ago while using the MBP normally (e.g. browsing the web). Since then I have done the following troubleshooting:
    1. Switched to other HDD:s with both Snow Leopard-/Lion set-ups (fresh installs, same kernel panic)
    2. Tried to reinstall from USB (same kernel panic)
    3. Zapped PRAM
    My thoughts: Some non-essential component in my MBP is malfunctioning, but since it works just fine in safe boot mode I figure that if I disable/remove the right kext(s) it should boot up fine in normal mode as well? (without the functionality of the component(s) that is disabled)
    Im having a hard time to localize the origin of the error since I dont have any experience of interpreting Mac kernel logs.
    Maybe you guys have any answers? Ill be eternally thankful for any thought, advice och help I can get!
    I have recorded logs from two different crashes:
    Kernel panic #1
    Picture of KP1:
    https://docs.google.com/open?id=0B39rsOfWshQEODM3OGJkNzEtODMyNy00OTM0LTgxNmItNzQ xZDkxMzdiMWQ3
    All Message Log:
    2011-11-28 11:44:58,000 bootlog: BOOT_TIME 1322477098 0
    2011-11-28 11:45:05,000 kernel: Darwin Kernel Version 11.2.0: Tue Aug  9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
    2011-11-28 11:45:05,000 kernel: vm_page_bootstrap: 942082 free pages and 32766 wired pages
    2011-11-28 11:45:05,000 kernel: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
    2011-11-28 11:45:05,000 kernel: zone leak detection enabled
    2011-11-28 11:45:05,000 kernel: standard timeslicing quantum is 10000 us
    2011-11-28 11:45:05,000 kernel: mig_table_max_displ = 73
    2011-11-28 11:45:05,000 kernel: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    2011-11-28 11:45:05,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    2011-11-28 11:45:05,000 kernel: calling mpo_policy_init for TMSafetyNet
    2011-11-28 11:45:05,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    2011-11-28 11:45:05,000 kernel: calling mpo_policy_init for Sandbox
    2011-11-28 11:45:05,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    2011-11-28 11:45:05,000 kernel: calling mpo_policy_init for Quarantine
    2011-11-28 11:45:05,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
    2011-11-28 11:45:05,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
    2011-11-28 11:45:05,000 kernel: The Regents of the University of California. All rights reserved.
    2011-11-28 11:45:05,000 kernel: MAC Framework successfully initialized
    2011-11-28 11:45:05,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
    2011-11-28 11:45:05,000 kernel: IOAPIC: Version 0x11 Vectors 64:87
    2011-11-28 11:45:05,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
    2011-11-28 11:45:05,000 kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
    2011-11-28 11:45:05,000 kernel: [ PCI configuration begin ]
    2011-11-28 11:45:05,000 kernel: console relocated to 0xf20010000
    2011-11-28 11:45:05,000 kernel: PCI configuration changed (bridge=6 device=3 cardbus=0)
    2011-11-28 11:45:05,000 kernel: [ PCI configuration end, bridges 7 devices 19 ]
    2011-11-28 11:45:05,000 kernel: AppleIntelCPUPowerManagement: (built 21:08:10 Aug  9 2011) initialization complete
    2011-11-28 11:45:05,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 002332fffed252a2; max speed s800.
    2011-11-28 11:45:05,000 kernel: [IOBluetoothHCIController::setConfigState] calling registerService
    2011-11-28 11:45:05,000 kernel: ERROR: FireWire unable to determine security-mode; defaulting to full-secure.
    2011-11-28 11:45:05,000 kernel: mbinit: done [64 MB total pool size, (42/21) split]
    2011-11-28 11:45:05,000 kernel: Pthread support ABORTS when sync kernel primitives misused
    2011-11-28 11:45:05,000 kernel: com.apple.AppleFSCompressionTypeZlib kmod start
    2011-11-28 11:45:05,000 kernel: com.apple.AppleFSCompressionTypeDataless kmod start
    2011-11-28 11:45:05,000 kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
    2011-11-28 11:45:05,000 kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
    2011-11-28 11:45:05,000 kernel: AppleIntelCPUPowerManagementClient: ready
    2011-11-28 11:45:05,000 kernel: BTCOEXIST off
    2011-11-28 11:45:05,000 kernel: wl0: Broadcom BCM432b 802.11 Wireless Controller
    2011-11-28 11:45:05,000 kernel: 5.100.98.75
    2011-11-28 11:45:05,000 kernel: rooting via boot-uuid from /chosen: B431148B-03FB-3BC2-BB3E-7BCA2BEB0A29
    2011-11-28 11:45:05,000 kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    2011-11-28 11:45:05,000 kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9250410AS Media/IOGUIDPartitionScheme/LION@2
    2011-11-28 11:45:05,000 kernel: BSD root: disk0s2, major 14, minor 2
    2011-11-28 11:45:05,000 kernel: Kernel is LP64
    2011-11-28 11:45:00,020 com.apple.launchd: *** launchd[1] has started up. ***
    2011-11-28 11:45:07,000 kernel: NVEthernet: Ethernet address 00:23:32:d2:52:a2
    2011-11-28 11:45:07,000 kernel: AirPort_Brcm4331: Ethernet address 00:23:6c:8c:fe:f0
    2011-11-28 11:45:07,000 kernel: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    2011-11-28 11:45:08,992 com.apple.launchd: (com.cisco.anyconnect.vpnagentd[54]) posix_spawn("/opt/cisco/vpn/bin/vpnagentd", ...): No such file or directory
    2011-11-28 11:45:08,992 com.apple.launchd: (com.cisco.anyconnect.vpnagentd[54]) Exited with code: 1
    2011-11-28 11:45:08,992 com.apple.launchd: (com.cisco.anyconnect.vpnagentd) Throttling respawn: Will start in 10 seconds
    2011-11-28 11:45:10,182 com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
    2011-11-28 11:45:10,313 com.apple.pfctl: No ALTQ support in kernel
    2011-11-28 11:45:10,313 com.apple.pfctl: ALTQ related functions disabled
    2011-11-28 11:45:10,542 com.apple.SecurityServer: Session 100000 created
    2011-11-28 11:45:11,000 kernel: macx_swapon SUCCESS
    2011-11-28 11:45:11,071 com.apple.DumpPanic: 2011-11-28 11:45:10.809 DumpPanic[46:4303] Error getting a reference to IODeviceTree:/options
    2011-11-28 11:45:11,073 com.apple.launchd: (com.apple.DumpPanic[46]) Exited with code: 1
    2011-11-28 11:45:13,000 kernel: Waiting for DSMOS...
    2011-11-28 11:45:13,399 UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
    2011-11-28 11:45:13,404 UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
    2011-11-28 11:45:13,404 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    2011-11-28 11:45:13,408 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    2011-11-28 11:45:13,408 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    2011-11-28 11:45:13,408 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    2011-11-28 11:45:13,409 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    2011-11-28 11:45:13,409 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    2011-11-28 11:45:13,552 UserEventAgent: CertsKeychainMonitor: configuring
    kernel.log:
    Nov 28 11:45:05 localhost kernel[0]: Darwin Kernel Version 11.2.0: Tue Aug  9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
    Nov 28 11:45:05 localhost kernel[0]: vm_page_bootstrap: 942082 free pages and 32766 wired pages
    Nov 28 11:45:05 localhost kernel[0]: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
    Nov 28 11:45:05 localhost kernel[0]: zone leak detection enabled
    Nov 28 11:45:05 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Nov 28 11:45:05 localhost kernel[0]: mig_table_max_displ = 73
    Nov 28 11:45:05 localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    Nov 28 11:45:05 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    Nov 28 11:45:05 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
    Nov 28 11:45:05 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Nov 28 11:45:05 localhost kernel[0]: calling mpo_policy_init for Sandbox
    Nov 28 11:45:05 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    Nov 28 11:45:05 localhost kernel[0]: calling mpo_policy_init for Quarantine
    Nov 28 11:45:05 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    Nov 28 11:45:05 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Nov 28 11:45:05 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Nov 28 11:45:05 localhost kernel[0]: MAC Framework successfully initialized
    Nov 28 11:45:05 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    Nov 28 11:45:05 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
    Nov 28 11:45:05 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Nov 28 11:45:05 localhost kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
    Nov 28 11:45:05 localhost kernel[0]: [ PCI configuration begin ]
    Nov 28 11:45:05 localhost kernel[0]: console relocated to 0xf20010000
    Nov 28 11:45:05 localhost kernel[0]: PCI configuration changed (bridge=6 device=3 cardbus=0)
    Nov 28 11:45:05 localhost kernel[0]: [ PCI configuration end, bridges 7 devices 19 ]
    Nov 28 11:45:05 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 21:08:10 Aug  9 2011) initialization complete
    Nov 28 11:45:05 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 002332fffed252a2; max speed s800.
    Nov 28 11:45:05 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Nov 28 11:45:05 localhost kernel[0]: ERROR: FireWire unable to determine security-mode; defaulting to full-secure.
    Nov 28 11:45:05 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    Nov 28 11:45:05 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    Nov 28 11:45:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    Nov 28 11:45:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    Nov 28 11:45:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    Nov 28 11:45:05 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    Nov 28 11:45:05 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
    Nov 28 11:45:05 localhost kernel[0]: BTCOEXIST off
    Nov 28 11:45:05 localhost kernel[0]: wl0: Broadcom BCM432b 802.11 Wireless Controller
    Nov 28 11:45:05 localhost kernel[0]: 5.100.98.75
    Nov 28 11:45:05 localhost kernel[0]: rooting via boot-uuid from /chosen: B431148B-03FB-3BC2-BB3E-7BCA2BEB0A29
    Nov 28 11:45:05 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Nov 28 11:45:05 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9250410AS Media/IOGUIDPartitionScheme/LION@2
    Nov 28 11:45:05 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    Nov 28 11:45:05 localhost kernel[0]: Kernel is LP64
    Nov 28 11:45:07 localhost kernel[0]: NVEthernet: Ethernet address 00:23:32:d2:52:a2
    Nov 28 11:45:07 localhost kernel[0]: AirPort_Brcm4331: Ethernet address 00:23:6c:8c:fe:f0
    Nov 28 11:45:07 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    Nov 28 11:45:11 localhost kernel[0]: macx_swapon SUCCESS
    Nov 28 11:45:13 localhost kernel[0]: Waiting for DSMOS...
    system.log:
    Nov 28 11:44:58 localhost bootlog[0]: BOOT_TIME 1322477098 0
    Nov 28 11:45:00 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    Nov 28 11:45:08 localhost com.apple.launchd[1] (com.cisco.anyconnect.vpnagentd[54]): posix_spawn("/opt/cisco/vpn/bin/vpnagentd", ...): No such file or directory
    Nov 28 11:45:08 localhost com.apple.launchd[1] (com.cisco.anyconnect.vpnagentd[54]): Exited with code: 1
    Nov 28 11:45:08 localhost com.apple.launchd[1] (com.cisco.anyconnect.vpnagentd): Throttling respawn: Will start in 10 seconds
    Nov 28 11:45:10 localhost com.apple.ucupdate.plist[24]: ucupdate: Checked 1 update, no match found.
    Nov 28 11:45:10 localhost com.apple.pfctl[33]: No ALTQ support in kernel
    Nov 28 11:45:10 localhost com.apple.pfctl[33]: ALTQ related functions disabled
    Nov 28 11:45:11 localhost DumpPanic[46]: Error getting a reference to IODeviceTree:/options
    Nov 28 11:45:11 localhost com.apple.DumpPanic[46]: 2011-11-28 11:45:10.809 DumpPanic[46:4303] Error getting a reference to IODeviceTree:/options
    Nov 28 11:45:11 localhost com.apple.launchd[1] (com.apple.DumpPanic[46]): Exited with code: 1
    Nov 28 11:45:13 localhost UserEventAgent[11]: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
    Nov 28 11:45:13 localhost UserEventAgent[11]: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
    Nov 28 11:45:13 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    Nov 28 11:45:13 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    Nov 28 11:45:13: --- last message repeated 1 time ---
    Nov 28 11:45:13 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    Nov 28 11:45:13 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    Nov 28 11:45:13: --- last message repeated 1 time ---
    Nov 28 11:45:13 localhost UserEventAgent[11]: CertsKeychainMonitor: configuring
    Kernel panic #2
    Picture of KP2:
    https://docs.google.com/open?id=0B39rsOfWshQEMGFhZmRlNmMtNGU5YS00ODMzLWExMWEtOGI zNWQ4YThhOGFm
    All Message Log:
    2011-11-28 11:48:42,000 bootlog: BOOT_TIME 1322477322 0
    2011-11-28 11:48:51,000 kernel: Darwin Kernel Version 11.2.0: Tue Aug  9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
    2011-11-28 11:48:51,000 kernel: vm_page_bootstrap: 942082 free pages and 32766 wired pages
    2011-11-28 11:48:51,000 kernel: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
    2011-11-28 11:48:51,000 kernel: zone leak detection enabled
    2011-11-28 11:48:51,000 kernel: standard timeslicing quantum is 10000 us
    2011-11-28 11:48:51,000 kernel: mig_table_max_displ = 73
    2011-11-28 11:48:51,000 kernel: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    2011-11-28 11:48:51,000 kernel: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    2011-11-28 11:48:51,000 kernel: calling mpo_policy_init for TMSafetyNet
    2011-11-28 11:48:51,000 kernel: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    2011-11-28 11:48:51,000 kernel: calling mpo_policy_init for Sandbox
    2011-11-28 11:48:51,000 kernel: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    2011-11-28 11:48:51,000 kernel: calling mpo_policy_init for Quarantine
    2011-11-28 11:48:51,000 kernel: Security policy loaded: Quarantine policy (Quarantine)
    2011-11-28 11:48:51,000 kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
    2011-11-28 11:48:51,000 kernel: The Regents of the University of California. All rights reserved.
    2011-11-28 11:48:51,000 kernel: MAC Framework successfully initialized
    2011-11-28 11:48:51,000 kernel: using 16384 buffer headers and 10240 cluster IO buffer headers
    2011-11-28 11:48:51,000 kernel: IOAPIC: Version 0x11 Vectors 64:87
    2011-11-28 11:48:51,000 kernel: ACPI: System State [S0 S3 S4 S5] (S3)
    2011-11-28 11:48:51,000 kernel: PFM64 (36 cpu) 0xf10000000, 0xf0000000
    2011-11-28 11:48:51,000 kernel: [ PCI configuration begin ]
    2011-11-28 11:48:51,000 kernel: console relocated to 0xf20010000
    2011-11-28 11:48:51,000 kernel: PCI configuration changed (bridge=6 device=3 cardbus=0)
    2011-11-28 11:48:51,000 kernel: [ PCI configuration end, bridges 7 devices 19 ]
    2011-11-28 11:48:51,000 kernel: AppleIntelCPUPowerManagement: (built 21:08:10 Aug  9 2011) initialization complete
    2011-11-28 11:48:51,000 kernel: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 002332fffed252a2; max speed s800.
    2011-11-28 11:48:51,000 kernel: [IOBluetoothHCIController::setConfigState] calling registerService
    2011-11-28 11:48:51,000 kernel: ERROR: FireWire unable to determine security-mode; defaulting to full-secure.
    2011-11-28 11:48:51,000 kernel: mbinit: done [64 MB total pool size, (42/21) split]
    2011-11-28 11:48:51,000 kernel: Pthread support ABORTS when sync kernel primitives misused
    2011-11-28 11:48:51,000 kernel: com.apple.AppleFSCompressionTypeZlib kmod start
    2011-11-28 11:48:51,000 kernel: com.apple.AppleFSCompressionTypeDataless kmod start
    2011-11-28 11:48:51,000 kernel: com.apple.AppleFSCompressionTypeZlib load succeeded
    2011-11-28 11:48:51,000 kernel: com.apple.AppleFSCompressionTypeDataless load succeeded
    2011-11-28 11:48:51,000 kernel: AppleIntelCPUPowerManagementClient: ready
    2011-11-28 11:48:51,000 kernel: BTCOEXIST off
    2011-11-28 11:48:51,000 kernel: wl0: Broadcom BCM432b 802.11 Wireless Controller
    2011-11-28 11:48:51,000 kernel: 5.100.98.75
    2011-11-28 11:48:51,000 kernel: rooting via boot-uuid from /chosen: B431148B-03FB-3BC2-BB3E-7BCA2BEB0A29
    2011-11-28 11:48:51,000 kernel: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    2011-11-28 11:48:51,000 kernel: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9250410AS Media/IOGUIDPartitionScheme/LION@2
    2011-11-28 11:48:51,000 kernel: BSD root: disk0s2, major 14, minor 2
    2011-11-28 11:48:51,000 kernel: jnl: unknown-dev: replay_journal: from: 5649408 to: 9708544 (joffset 0x747000)
    2011-11-28 11:48:51,000 kernel: jnl: unknown-dev: journal replay done.
    2011-11-28 11:48:51,000 kernel: Kernel is LP64
    2011-11-28 11:48:51,000 kernel: hfs: Removed 0 orphaned / unlinked files and 6 directories
    2011-11-28 11:48:46,376 com.apple.launchd: *** launchd[1] has started up. ***
    2011-11-28 11:48:53,000 kernel: NVEthernet: Ethernet address 00:23:32:d2:52:a2
    2011-11-28 11:48:53,000 kernel: AirPort_Brcm4331: Ethernet address 00:23:6c:8c:fe:f0
    2011-11-28 11:48:53,000 kernel: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    2011-11-28 11:48:55,119 com.apple.launchd: (com.cisco.anyconnect.vpnagentd[54]) posix_spawn("/opt/cisco/vpn/bin/vpnagentd", ...): No such file or directory
    2011-11-28 11:48:55,120 com.apple.launchd: (com.cisco.anyconnect.vpnagentd[54]) Exited with code: 1
    2011-11-28 11:48:55,120 com.apple.launchd: (com.cisco.anyconnect.vpnagentd) Throttling respawn: Will start in 10 seconds
    2011-11-28 11:48:55,473 com.apple.pfctl: No ALTQ support in kernel
    2011-11-28 11:48:55,473 com.apple.pfctl: ALTQ related functions disabled
    2011-11-28 11:48:55,823 com.apple.ucupdate.plist: ucupdate: Checked 1 update, no match found.
    2011-11-28 11:48:55,886 fseventsd: event logs in /.fseventsd out of sync with volume.  destroying old logs. (171 12 336)
    2011-11-28 11:48:56,589 fseventsd: log dir: /.fseventsd getting new uuid: 1259FC9A-89C4-463B-A803-827EF26804C1
    2011-11-28 11:48:56,646 com.apple.DumpPanic: 2011-11-28 11:48:56.498 DumpPanic[46:4303] Error getting a reference to IODeviceTree:/options
    2011-11-28 11:48:56,652 com.apple.launchd: (com.apple.DumpPanic[46]) Exited with code: 1
    2011-11-28 11:48:57,000 kernel: macx_swapon SUCCESS
    2011-11-28 11:48:57,026 com.apple.SecurityServer: Session 100000 created
    2011-11-28 11:48:58,641 UserEventAgent: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
    2011-11-28 11:48:58,645 UserEventAgent: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
    2011-11-28 11:48:58,645 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    2011-11-28 11:48:58,645 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    2011-11-28 11:48:58,645 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    2011-11-28 11:48:58,645 UserEventAgent: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    2011-11-28 11:48:58,646 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    2011-11-28 11:48:58,646 UserEventAgent: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    2011-11-28 11:48:58,971 UserEventAgent: CertsKeychainMonitor: configuring
    2011-11-28 11:48:59,000 kernel: Waiting for DSMOS...
    kernel.log:
    Nov 28 11:48:51 localhost kernel[0]: Darwin Kernel Version 11.2.0: Tue Aug  9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
    Nov 28 11:48:51 localhost kernel[0]: vm_page_bootstrap: 942082 free pages and 32766 wired pages
    Nov 28 11:48:51 localhost kernel[0]: kext submap [0xffffff7f8072e000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072e000]
    Nov 28 11:48:51 localhost kernel[0]: zone leak detection enabled
    Nov 28 11:48:51 localhost kernel[0]: standard timeslicing quantum is 10000 us
    Nov 28 11:48:51 localhost kernel[0]: mig_table_max_displ = 73
    Nov 28 11:48:51 localhost kernel[0]: AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
    Nov 28 11:48:51 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
    Nov 28 11:48:51 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
    Nov 28 11:48:51 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    Nov 28 11:48:51 localhost kernel[0]: calling mpo_policy_init for Sandbox
    Nov 28 11:48:51 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
    Nov 28 11:48:51 localhost kernel[0]: calling mpo_policy_init for Quarantine
    Nov 28 11:48:51 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
    Nov 28 11:48:51 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
    Nov 28 11:48:51 localhost kernel[0]: The Regents of the University of California. All rights reserved.
    Nov 28 11:48:51 localhost kernel[0]: MAC Framework successfully initialized
    Nov 28 11:48:51 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
    Nov 28 11:48:51 localhost kernel[0]: IOAPIC: Version 0x11 Vectors 64:87
    Nov 28 11:48:51 localhost kernel[0]: ACPI: System State [S0 S3 S4 S5] (S3)
    Nov 28 11:48:51 localhost kernel[0]: PFM64 (36 cpu) 0xf10000000, 0xf0000000
    Nov 28 11:48:51 localhost kernel[0]: [ PCI configuration begin ]
    Nov 28 11:48:51 localhost kernel[0]: console relocated to 0xf20010000
    Nov 28 11:48:51 localhost kernel[0]: PCI configuration changed (bridge=6 device=3 cardbus=0)
    Nov 28 11:48:51 localhost kernel[0]: [ PCI configuration end, bridges 7 devices 19 ]
    Nov 28 11:48:51 localhost kernel[0]: AppleIntelCPUPowerManagement: (built 21:08:10 Aug  9 2011) initialization complete
    Nov 28 11:48:51 localhost kernel[0]: FireWire (OHCI) Lucent ID 5901 built-in now active, GUID 002332fffed252a2; max speed s800.
    Nov 28 11:48:51 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
    Nov 28 11:48:51 localhost kernel[0]: ERROR: FireWire unable to determine security-mode; defaulting to full-secure.
    Nov 28 11:48:51 localhost kernel[0]: mbinit: done [64 MB total pool size, (42/21) split]
    Nov 28 11:48:51 localhost kernel[0]: Pthread support ABORTS when sync kernel primitives misused
    Nov 28 11:48:51 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
    Nov 28 11:48:51 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
    Nov 28 11:48:51 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
    Nov 28 11:48:51 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
    Nov 28 11:48:51 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
    Nov 28 11:48:51 localhost kernel[0]: BTCOEXIST off
    Nov 28 11:48:51 localhost kernel[0]: wl0: Broadcom BCM432b 802.11 Wireless Controller
    Nov 28 11:48:51 localhost kernel[0]: 5.100.98.75
    Nov 28 11:48:51 localhost kernel[0]: rooting via boot-uuid from /chosen: B431148B-03FB-3BC2-BB3E-7BCA2BEB0A29
    Nov 28 11:48:51 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    Nov 28 11:48:51 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@B/AppleMCP79AHCI/PR T0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageD river/ST9250410AS Media/IOGUIDPartitionScheme/LION@2
    Nov 28 11:48:51 localhost kernel[0]: BSD root: disk0s2, major 14, minor 2
    Nov 28 11:48:51 localhost kernel[0]: jnl: unknown-dev: replay_journal: from: 5649408 to: 9708544 (joffset 0x747000)
    Nov 28 11:48:51 localhost kernel[0]: jnl: unknown-dev: journal replay done.
    Nov 28 11:48:51 localhost kernel[0]: Kernel is LP64
    Nov 28 11:48:51 localhost kernel[0]: hfs: Removed 0 orphaned / unlinked files and 6 directories
    Nov 28 11:48:53 localhost kernel[0]: NVEthernet: Ethernet address 00:23:32:d2:52:a2
    Nov 28 11:48:53 localhost kernel[0]: AirPort_Brcm4331: Ethernet address 00:23:6c:8c:fe:f0
    Nov 28 11:48:53 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete():  adding AppleEFINVRAM notification
    Nov 28 11:48:57 localhost kernel[0]: macx_swapon SUCCESS
    Nov 28 11:48:59 localhost kernel[0]: Waiting for DSMOS...
    system.log:
    Nov 28 11:48:42 localhost bootlog[0]: BOOT_TIME 1322477322 0
    Nov 28 11:48:46 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
    Nov 28 11:48:55 localhost com.apple.launchd[1] (com.cisco.anyconnect.vpnagentd[54]): posix_spawn("/opt/cisco/vpn/bin/vpnagentd", ...): No such file or directory
    Nov 28 11:48:55 localhost com.apple.launchd[1] (com.cisco.anyconnect.vpnagentd[54]): Exited with code: 1
    Nov 28 11:48:55 localhost com.apple.launchd[1] (com.cisco.anyconnect.vpnagentd): Throttling respawn: Will start in 10 seconds
    Nov 28 11:48:55 localhost com.apple.pfctl[33]: No ALTQ support in kernel
    Nov 28 11:48:55 localhost com.apple.pfctl[33]: ALTQ related functions disabled
    Nov 28 11:48:55 localhost com.apple.ucupdate.plist[24]: ucupdate: Checked 1 update, no match found.
    Nov 28 11:48:55 localhost fseventsd[43]: event logs in /.fseventsd out of sync with volume.  destroying old logs. (171 12 336)
    Nov 28 11:48:56 localhost fseventsd[43]: log dir: /.fseventsd getting new uuid: 1259FC9A-89C4-463B-A803-827EF26804C1
    Nov 28 11:48:56 localhost DumpPanic[46]: Error getting a reference to IODeviceTree:/options
    Nov 28 11:48:56 localhost com.apple.DumpPanic[46]: 2011-11-28 11:48:56.498 DumpPanic[46:4303] Error getting a reference to IODeviceTree:/options
    Nov 28 11:48:56 localhost com.apple.launchd[1] (com.apple.DumpPanic[46]): Exited with code: 1
    Nov 28 11:48:58 localhost UserEventAgent[11]: starting CaptiveNetworkSupport as SystemEventAgent built Jun 13 2011 17:29:21
    Nov 28 11:48:58 localhost UserEventAgent[11]: CaptiveNetworkSupport:CreateInterfaceWatchList:2788 WiFi Devices Found.
    Nov 28 11:48:58 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    Nov 28 11:48:58 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    Nov 28 11:48:58: --- last message repeated 1 time ---
    Nov 28 11:48:58 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptivePublishState:1211 en1 - PreProbe
    Nov 28 11:48:58 localhost UserEventAgent[11]: CaptiveNetworkSupport:CaptiveSCRebuildCache:81 Failed to get service order
    Nov 28 11:48:58: --- last message repeated 1 time ---
    Nov 28 11:48:58 localhost UserEventAgent[11]: CertsKeychainMonitor: configuring

    Thank you for your quick reply!
    However I cant manage to find the panic logs in the library/logs/ or any of its directorys. Ive looked for this logs before and my guess is that they dont get created if the panic occurs during boot.

  • DV7-4069wm ACPI table reset/recovery

    I have been unable to reset my acpi tables to factory defaults (firmware, not software).
    They were modified remotely via rootkit on win7 and BIOS was flashed backwards to F23 from F28.
    I cannot determine if I am running on flashed bios or a shadow variant as BIOS admin is locked out from all advanced features.
    I am no longer able to do a recovery BIOS flash with win+b keys either from a EFI util created USB key or HP_TOOLS drive partition, nor a prepared efi HP_TOOLS CD. "remove any disks and press any key to reboot" message, which does not reboot - requires power reset. No BIOS recovery screen at all, simply disk/usb seeks, then message. Using the four arrow key combination, did result in a seemingly successful forceflash update of BIOS stamp, however did not display any BIOS recovery screen, nor fan speedup as expected during a classic flash.
    In old win64 premium install, user admin context was overridden, and due to acpi injection any reinstall on windows is also compromised. In windows with SVM disabled in BIOS, all ata/usb runs via usb subsystem drivers, in Linux it always does. With SVM enabled in BIOS, windows reports ATA drivers, however ATA disk to disk traffic in either OS maxes out at 20Mb/s - usb2 speeds.
    In Ubuntu 12.04 I see cyclic processes running with no userid, no pid which may correlate with bootlog messages of cwd, cmd as the kernel comes up.  I also see iterative ip scans from link-local to active wlan0 in the upper UDP ranges. IE. my hardware is scanning my (whichever) OS. When booting with a Hiren's boot CD in minixp -  process explorer reports 12,000 lsass.exe listings (via buffer overflow access) by the time I can get it open. This happens with NO HDDs at all and continues until the system BSODs. This is not a hardware problem...
    I have pulled the cmos battery and generated a cmos checksum error and subsequent reboot, but cannot rid my machine of this malware. While I suspect it is in fact a variant of this:
    Deactivating BIOS rootkit
    I cannot confirm this and until it is removed the machine remains unsecured despite locked down ubuntu denying access. Hardware doesn't need to ask permission after all, and even ubuntu doesn't report hardware processes not under it's control.
    So, my questions are:
    1) How can I access the advanced BIOS menu on my dv7-4069wm (f10 then 'A') is fail.
    2) Are ACPI tables updated via BIOS flash?
    3) Are ACPI tables erased with CMOS battery removal?
    4) How can I ensure my BIOS is not shadowed while reflashed with no BIOS menu to disable it?
    5) How can I disable (or reset to dormant) the absolute firmware embedded in my bios for theft recovery because it seems like someone has stolen my hardware from my control. While this was purchased legally, troubleshooting this problem may have produced a similar race condition to activate computrace, or it may be the vehicle for my problems.
    I have tested memory thoroughly, tried four (two new) HDDs, zero'd MBR w/live ubu cd between installs.
    I welcome any input on this (links please) but leave this as a warning in the event  I do not see any.
    There is BIOS malware out there, and even the stuff with best of intent (link above) holds little encrypted/authenticated security that it may be easily circumvented and taken over. I'm not looking to convince anyone, rather seeking help from those who understand the problem (or any portion herein). It seems many remain in denial that this can happen to them, and honestly it may have and you would never know until remote folks got sloppy (In my case rootkit w/popups - they got greedy)
    TIA
    -Hyar

    Further History:
    At one point I was (it seemed) able to flash using the win+b keys, and even successfully flahsed the version stamp using the arrow key "forceflash". The platform.ini it appears has no bearing on this type of flash however as it's not necessarily there and as such the "rom protected areas" reported by BIOS (and currently under remote owner control) do NOT get updated.
    There is provision for updating portions of ROM including those reported protected using the platform.ini file called by the insyde win-flash tool, however it seems those now in charge have made provision to handle this.
    In my user rights curcumvented windows, I am able to run the BIOS update extraction tool (runas admin), and subsequent insyde flash utility all at once (decompress, and run via selfex package). No success as defaults are either being burnt to inneffective ghost ROM, or the default platform.ini file does not flash protected areas including acpi. If however, I edit platform.ini changing ANYTHING (even one flag) - the OS reports incompatibility of flash tool.
    I prepared an SD card (only way to write lock the HP_TOOLS folder) and a win+b recovery flash boot will seem to switch to flash mode (no screen bios load) but will not recognize the flashfile, or fails to flash it.
    With an ubuntu live cd, any creation of a fat32 usb drive was thwarted when the filesystem was named "HP_TOOLS" as it was rewritten to "HP_TOOLS nA" on save. Nice catch, hacker.
    Futher, There are mutliple ACPI entries for "BIOS read, BIOS write which I cannot seem to confirm should exist in ACPI at all.
    Currently running laptop with no battery and cmos battery out.
    This is a nasty tick and well burrowed.
    I don't know who is reading this, but I hope it helps someone.
    If you have a clue/hint/lead to offer I do welcome another perspective.

  • Dell Inspiron 4150 and acpi

    I've got my 2.6.6 kernel with acpi in it.  I can use either
    echo 1 > /proc/acpi/sleep
    or
    echo -n "standby" > /proc/power/state
    and the laptop will go into standby mode.  I can also do the other modes availble.  However, I my laptop will not "wake up".  When I press the power button to recover, the lights come back on and my wireless nic lights back up.  The screen even turns back on, but its all black.  Any ideas.

    Check ACPI4Linux's website for info on the types of sleep states defined under the acpi spec.  To determine what sleep states your notebook supports run cat /proc/acpi/sleep. As for actually getting stuff to wake up, note that  linux's ACPI support, especially for S3, is sort of buggy atm.  Look in the kernel sources Documentation/power/tricks.txt for some troubleshooting tips and take it from there.

  • Could not open the Bluetooth ACPI device driver (tosrfec.sys)

    Hello,
    I installed Toshiba Bluetooth Stack on Windows 98 SE (Version 2.03 of BT Stack..).
    If i wan't to run the Bluetooth Manager I always get the message "Could not open the Bluetooth ACPI device driver (tosrfec.sys).".
    What can I do ?
    Message was edited by: jollydwarf

    Hello
    Click to BT topics list and there you will find link to Toshiba Bluetooth Information Center. Check please FAQ section and there you can find many useful information about BT and BT troubleshooting.

  • After Deploying an Image: Windows Boot Manager - Missing ACPI.sys

    Hi,
    I am currently working on deploying a Windows 7 Pro x64 image to a number of clients over our network using FOG. We used KVM in Ubuntu to build the base image. The image has a small virtual disk for the Windows installation and is deployed to clients with larger
    drives. Prior to capture the image, we ran sysprep /generalize /shutdown /oobe /unattend:unattend.xml, then boot the VM to the FOG client and let FOG save off the disk image. We then deploy the image to clients over FOG.
    FOG successfully copies the image over, then reboots the PC. The computer attempts to boot from the local hard drive, then fails at the Windows Boot Manager screen, saying:
    Windows boot manager
    Windows failed to start. A recent hardware or software change might be the cause....
    File: \Windows\system32\drivers\ACPI.sys
    Status: 0xc0000098
    Info: Windows failed to load because a critical system driver is missing or corrupt.
    I've updated the client's BIOS, tried a different hard drive, used ATA secure erase to wipe the drive before formatting, and still encounter this same issue with certain client computers. Are there any other steps I can take to resolve this issue?
    What files in Panther should I look at (or post) to troubleshoot? I don't see anything too obvious in diagerr, and sestuperr.log is just about empty.

    We're using two models of 120GB SSDs, and deploying to 5 different motherboards (4 Intel models + 1 MSI model). The issue is most common with the DH55TC Intel boards.
    We're using FOG due to budget limits--otherwise, WDT definitely would have been considered.

  • Bios not fully acpi compliant

    I can't get past a blue screen (BSOD) which states ...The BIOS in this system is not fully ACPI compliant... I've researched this site and the web and can't find an answer that works. I'd like to try to update the BIOS since it's the original and there are 2 newer versions but they appear to require windows to run and I can't boot into windows. My system is:
    HP Pavilion Elite Desktop m9340f
    Q6700 @ 2.66 GHz
    6 GB RAM (2x2GB+2x1GB)
    Asus IPIBL-LB "Benicia" Motherboard
    BIOS 5.25 dated 6/16/2008
    Windows Vista 64bit
    This is how far I get:
    Windows is loading files...
    Microsoft Corporation flashes then BSOD
    Here's what I've tried so far:
    F8
    Advanced Boot Options:
    "Repair Your Computer" tries to start window, get BSOD
    "Safe Mode" "Loading Windows Files"  then BSOD
    F9 HP Diagnostics works OK and all hardware checks out OK
    F10 Setup mode, I've changed the SATA1 controller from RAID default to IDE and AHCI with same results
    F11 Recovery (tries to get into windows and get BSOD)
    Tried recovery using recovery DVDs with the same results when it tries to load windows
    Tried Windows 7 upgrade disk with same results
    Removed all RAM and tried one stick at a time with same results
    Installed HD in USB dock and have run chkdsk (no errors), MSE virus scan (no issues)
    Ran System File Checker sfc /scannow which resulted in this statement "Windows Resource Protection found corrupt files but was unable to fix some of them" I couldn't find any details in the CBS.log file
    Tried clean HD (SSD) to recover to with same results
    Reseated video card (same results)
    Removed video card and ran off onboard video with same results
    Reset BIOS to defaults
    Cleared CMOS with jumper
    I think I've exhausted about all I can think of and find online. Any ideas on how to flash the BIOS would be appreciated.

    HI NGNeer:
    Thank you for your reply.
    I am sending you a link to "Updating the BIOS During Startup" click here.
    I am also sending you a link to "Troubleshooting System Recovery Problems (Windows Vista)" click here.
    I hope these are helpful.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Acpi wifi not working on vista

    the ACPI wifi stopped working on my laptop and shows an error message. Wifi shows it being disabled. Any help on how to fix this? I have an OLD HP pavillion DVD6 with vista from 2007. My recovery also stopped working at the same time right after a windows update. Thanks in advance.

    Hi @annaclarkrosen ,
    Welcome to the HP Community! I hope that you enjoy your time posting with us.
    I see that you are having some wireless issues with your older Pavilion. I will be happy to help you with this. What is the exact error message that you are going? What is the product number for your model? In your Device Manager what do you have listed under Network Adapters?
    You can try the troubleshooting steps listed in this HP document Troubleshooting your Wireless Network and I have included a few generic wireless troubleshooting steps to try below:
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • [SOLVED] Bumblebee known bug with ACPI ?

    Hi everyone.
    I'm having troubles with Bumblebee. Everything worked just fine until a few days ago (And I don't know when it started bugging because I don't use it really often).
    I read a lot of troubleshooting tutorials and I can't seem to find out what's the problem. It looks like I have a problem with ACPI.
    Here is the result of the command 'sudo bumblebeed -vv' when I tried to use optirun :
    Pastebin
    The package installed on my computer are bumblebee and bbswitch (both from the community repo)
    I am in the group 'bumblebee' (I double checked that)
    I tried to reboot several times
    Could someone help me with that one or point me to a post related to my problem ?
    Last edited by Depado (2014-03-14 10:37:46)

    I think the problem is not ACPI related, despite the warning in the logs. I have the same errors in the logs about acpi and segfault with libGL, but using 'optirun -b primus' or 'primusrun' does work on my computer. It seems the new driver is source of more complaints than the previous one. Try using primus bridge, or maybe downgrade nvidia package.

  • P35 Platinum and Vista/ACPI issue

    I'm having problems trying to get Vista installed on my P35 Platinum-based system.  I'm getting an error at the beginning of Vista's installation that the BIOS doesn't support ACPI.  Well, that option is turned on in the BIOS, and I've toggled just about every setting under the Power Management section of the BIOS config utility, but nothing makes a difference.  I flashed the latest (1.2) BIOS to the board, no change.   I'm also seeing the computer go to a 'Safe to turn off your computer' screen rather than it just powering off - is this related? 
    Any suggestions would be appreciated, thanks.

    ACPI has to be enabled before you install XP. If you re-enable it after installing XP, you will get a bluescreen.  If you used an existing Windows Installation, that was set up under different system conditions, it probably didn't have the proper HAL drivers for the new  configuration.
    If you re-install XP with ACPI, IOAPIC and MPS Table = 1.4 you shouldn't have any problems.
    --> http://support.microsoft.com/?scid=kb%3Ben-us%3B309283&x=12&y=12
    Quote
    Device Manager does not permit the change from a Non-ACPI HAL to an ACPI HAL. You must use a new install of Windows XP or Windows Server 2003 for this kind of change. Change from an ACPI HAL to a Non-ACPI HAL only for troubleshooting purposes.

  • Possible audio latency issues due to acpi.sys

    Hello, I use Vista to run the digital DJ program, Traktor. While I've never had any latency issues before, they recently started cropping up and I ran LatencyMon to see where the problem could be. It appears that the problem may be the service, acpi.sys,
    as it had the highest execution of 1.2, which is fairly high. I've tried using Process Explorer and entering into the BIOS to turn off acpi.sys, but wasn't able to. Is there really any way of disable this service?
    Thank you.

    Hi,
    As this issue did not occur before, system restore can be under consideration.
    To disable the feature, you can also go to Device Manager, expand System Devices.
    This issue can occur due to hardware or software conflictions. Let us try the steps below to narrow down the cause of the issue. Please check if we can boot in Win7 normally:
    Device Clean Boot
    ==============
    In this situation, your system will only have the basic hardware devices and it should be more stable. If it is inconvenient to unplug the devices, we can disable them in Device Manager. Please refer to the following steps:
    1. Click "Start", type "DEVMGMT.MSC" in the Search textbox and press Enter.
    2. Expand "Sound, video and game controllers".
    3. Right click on your Sound Card, select "Properties"
    4. Click "Driver" tab, click Disable (Disable the selected device). Click OK
    5. Please use the same method to disable other hardware such as: Modem, network card, CD-R drive. Please note some devices such as video adapter are not available to be disabled.
    6. Please restart the computer. Can we boot in Windows Vista properly? If so, please continue prepare a clean boot to troubleshoot.
    Clean Boot prevents software conflicts by preventing the startup items and non Microsoft services from loading. This way you can safely follow the process of elimination to check which application is causing this behavior.
    Refer:
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.microsoft.com/kb/929135
    Note: Ensure that you put your computer back to normal startup mode after completing the troubleshooting steps. Steps are available in the article given above.
    Regards,
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Maybe you are looking for

  • How to delete the Transport Request?

    Hi all,    I want to delete the Transoport Request from Production Box( we have 2 request number... one child another one parent). I released the Child Request. Now i want to delete that request. we don't have setup in our production Box i think(in o

  • Bridge Offset Nulling Doesn't Seem to Work With SCC-SG24

    Does anyone know if the DAQmx "Perform Bridge Offset Nulling Calibration" vi works with the SCC-SG24 modules?  We have used our NI-9237 module in the past to acquire dual-channel load cell (thrust & torque) measurements, and calling that vi does a fi

  • Search not working in system preferences

    The search field in system preferences has stopped working on mt G5 Dual. No matter what I search, including simple terms like 'date' or 'network' - nothing gets highlighted. Any ideas anyone?

  • Random TV shows syncing with iPad2

    I have my iPad2 set to sync the 3 oldest unwatched tv shows of select series.  This morning, it has randomly started syncing additional episodes.  These episodes are all marked as watched, some from series that are selected in the ipad settings, some

  • SF300-24PP switch causing err-disable on some other switch Uplinks

    This is something that happened as I was setting up a couple of these PoE SF300 switches for IP cameras. We wanted to save a little money so we purchased a few of these switches to daisy-chain onto a couple of our 4507s to provide PoE support for IP