[Troubleshoot] MSI Gaming 7 ~ How to enable XMP with HyperX Fury RAM?

Hi folks,
First time posting here and new to the MSI brand with a Gaming 7 and  MSI GTX 970 Gaming 4G GPU. They are quite awesome so far.
Anyway, I'm also new to the intel world after using AMD chips for the past number of years and I am wondering what is this buzz about XMP profiles? My new RAM sticks support XMP according to their website. But I'm not sure how to enable them in the UEFI Bios. Videos show that there should be a button right above the GENIE OC but I dont see one. Can someone help me understand how to enable it?
Spec info:
Intel 4790k
Gaming 7 Motherboard
HyperX Fury RAM, 2x8GB (16GB) 1866mhz
EDIT: I cannot share external links but if you search xmp hyperx certifications you'll see that the RAM is XMP ready.
Thanks!

Quote from: rp00 on 03-June-15, 22:47:43
but if you set your mem settings to auto, it should pick up 1866 speed from SPD
Check with CPU-Z
Such is not possible. Programmed SPD settings to be used depend on the abilities of the memory controller (here means the cpu) used. The maximum specified memory support of an i7 4790K is DDR3 and DDR3L 1333/1600 (http://ark.intel.com/products/80807/Intel-Core-i7-4790K-Processor-8M-Cache-up-to-4_40-GHz). It is therefor impossible to run memory without an XMP extension (like the Fury sticks) on the platform in question above ddr3 1600 without setting speeds and timings manually.

Similar Messages

  • So I've changed my hard drive for an ssd and now I've been told to enable trim now I've got the apple cover will they show me how to enable it with out some program of the internet ?

    so I've changed my hard drive for an ssd and now I've been told to enable trim  ?  now I've got the apple cover will they show me how to enable it with out some program of the internet ?

    Use an app called chameleon ssd optimizer.
    I enabled trim with it after almost a year of having installed a Samsung 840 pro SSD and my read/write speeds almost quadrupled.
    I would definite;y advise using it even though Samsung SSD's come with there own garbage disposal.
    Hope that helps.

  • X201 (how to enable it with 8GB x 2 DDR3 RAM)

    Hi, 
    Please recommend how to install 16GB (8GB x 2) Ram into X201 ?
    Does it implement by upgrade BIOS ?
    thanks,
    tlee

    Hi,
    1 ) In my case, I installed Kingston Brand - 4GB SO-DIMM DDR3.
    Since, it is famous in my living place due to its higher compatible with most of different laptop machines.
    2) I think so. Other guy reported it is impossible to upgrade 16GB. But I hope ThinkPad R&D to solve that issue.
    3 ) I think it is okay to do it. Since, the speed will be down to the lower speed of RAM module PC3-8500 automatically.
    Thanks !

  • Gaming 3 motherboard not working with dual channel ram

    Hello,
    Whenever I try to put the RAM in dual channel (slots 1/3 or 2/4) in the motherboard Gaming 3 (z97), the motherboard stops working, and starts a loop of getting power for two seconds, and turning off again.. untill I kill the mains.
    This doesn't happen when the Ram is in single channel (slots 1 and 2)
    The ram is Corsair Value select 4 GB x2
    My specs are:
    Intel i5-4690k
    Nvidia Gtx 750 Ti
    MSI Gaming 3 motherboard
    Corsair Value select 4 GB x 2
    Samsung Evo 128 GB SSD
    The bios version is 2.3
    Any help would be great. Is it a motherboard specific problem? Or voltage issues?

    Hi,
    can you refer to manual and check which DIMM slots are default? As far as I know, they're 1 and 3.
    Test each RAM stick individually, by going from DIMM #1 until #4. Working fine? Test the other same way. Also look around CPU socket and RAM slots for any scratches or other unusual stand offs. Also try to lower RAM down to 1333 and try again.

  • MSI Gaming app does not work with SLI

    I'm now doing SLI with two 770's and the Gaming app does not work. I follow the instructions that tell me to disable and then enable SLI for it to work but it does not work.

    Simply don't use the gaming APP but the more advanced Afterburner: >>How to use MSI Afterburner<<

  • How to Enable XMP in BIOS of TS140 Server 70A4 00HUX

    I installed 4X8GB DIMM's pc3-12800 ddr3-1600 in a TS 140.   I am running Win 7 64-bit Pro OS to use it as a HTPC/Media Server.   The WEI should be maxed out but it is only 7.4.   I was checking other sites which suggest that the clock speed may be set to 1333MHz instead of the 1600MHz that these DIMM's are capable of.  
    I checked the BIOS and there are no settings which will enable Intel XMP or allow me to manually set the clock speed or timing for these DIMM's.  
    Can someone tell me how/where to access and change this in the BiOS?   I have a 70A4 00HUX model

    Quote from: rp00 on 03-June-15, 22:47:43
    but if you set your mem settings to auto, it should pick up 1866 speed from SPD
    Check with CPU-Z
    Such is not possible. Programmed SPD settings to be used depend on the abilities of the memory controller (here means the cpu) used. The maximum specified memory support of an i7 4790K is DDR3 and DDR3L 1333/1600 (http://ark.intel.com/products/80807/Intel-Core-i7-4790K-Processor-8M-Cache-up-to-4_40-GHz). It is therefor impossible to run memory without an XMP extension (like the Fury sticks) on the platform in question above ddr3 1600 without setting speeds and timings manually.

  • How to enable iPad with right passcode after entering wrong passcode 6 times

    Hi, my iPad is disabled because my daughter entered wrong passcode more than 6 times. I do remember the passcode myself.
    How can I enable the iPad without wiping everything? I do not see an option to enter passcode anywhere. I never backed up my iPad. When I connect the iPad to iTunes, it keeps on giving the message that respond on iPad. But the iPad only shows that iPad is disabled.
    Find my iPad is also not enabled.
    I recently upgraded the OS to iOS 8.
    Thank you for your help in advance.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • C5: How to enable loudspeaker with ovi maps?

    C5:
    Loudspeaker is en/disabled with the #-button. With ovi-maps I see, e.g. when driving home, in the upper right corner, that the loudspeaker is disabled. # changes the size of the map, so how do I enable the loudspeaker?

    yes you have to download walk guidance
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How to enable OCR with Scangear MP under Linux for MG8250?

    Under Linux openSUSE 12.3 I use Scangear MP 1.80 for my Canon PIXMA MG8250.
    As a scan target (in my German GUI it's "Ziel") I can choose "OCR". But there is no text output, the scan is just saved as a picture. How can I configure Scangear to open the scan via Tesseract in a text editor.
    By the way, the target "Print" (in German "Drucken") leads to saving just as well, though there is at least one printer at hand, of course.
    It's a pity that the pixma scan drivers that are shipped with openSUSE don't work with xsane (the scanner starts working, but stops after one third of the page). Using xsane with a different scanner I can use OCR successfully.
    Volker

    There are two basic types of core OCR algorithm, which may produce a ranked list of candidate characters.
    Matrix matching involves comparing an image to a stored glyph on a pixel-by-pixel basis; it is also known as "pattern matching" or "pattern recognition". This relies on the input glyph being correctly isolated from the rest of the image, and on the stored glyph being in a similar font and at the same scale. This technique works best with typewritten text and does not work well when new fonts are encountered. This is the technique the early physical photocell-based OCR implemented, rather directly.
    Feature extraction decomposes glyphs into "features" like lines, closed loops, line direction, and line intersections. These are compared with an abstract vector-like representation of a character, which might reduce to one or more glyph prototypes. General techniques of feature detection in computer vision are applicable to this type of OCR, which is commonly seen in "intelligent" handwriting recognition and indeed most modern OCR software. Nearest neighbour classifiers such as the k-nearest neighbors algorithm are used to compare image features with stored glyph features and choose the nearest match.
    Software such as Cuneiform and Tesseract use a two-pass approach to character recognition. The second pass is known as "adaptive recognition" and uses the letter shapes recognized with high confidence on the first pass to better recognize the remaining letters on the second pass. This is advantageous for unusual fonts or low-quality scans where the font is distorted.
    So I wonder which kind of OCR algorithm are you using?

  • How to enable JAAS with jdeveloper

    hi all,
    I start reading about JAAS and previously i developed an web application and now i want to implement XML based JAAS in it i searched different articles which shows JAAS with DB support, can any one mention any good article with baby steps for xml based jaas in jdeveloper,
    I first to understand JAAS with babay steps then i will implement it in my application.
    A hello world type of tutorial with jdeveloper.
    Thanks & Regards
    imran

    Hi,
    I started a how-to about using the JAAS provider for container managed authentication. But this is about using container managed security with custom JAAS login modules.
    If you want to natively code in JAAS, all you need to do is to ensure you set the jaasMode in the aplication's orion-application.xml file. See the OC4J security guide, which is a part of teh OracleAs documentation available nline at otn.oracle.com --> documentation
    The XML provider is the dafult provider configured in OC4J and can have user and groups configured as well as JAAS permissions for each of them. You specify the JAAS LoginModule in the system-jazn-data.xml file of the OC4J container and access the login configuration name within your application as part of the created JAAS LoginContext. Once you have this, you obtain a authenticated subject with the user Principals. Using this principals you can now perform check permissions on the AccessController context.
    Frank

  • WRT300N, how to enable DHCP with Reservation?

    Hi all,
    I plan buy a WRT300N, since Hong Kong still have not the WRT150N now for business internet share in SMB ...
    But our network are using Static IP on some computer, but some computer using DHCP ..., and our old router have the DHCP Reservation
    How do WRT300N enable DHCP also have the function like DHCP Reservation?
    Thx for your time.
    Best Regards,
    Jimmy Chan
    http://www.jimmychan.tk
    http://explorerhome.no-ip.org/blog

    Thx, I understand how to do, for example seting up a pool from 2-50
    Then manual set IP for 51 to 254 ...
    Best Regards,
    Jimmy Chan
    http://www.jimmychan.tk
    http://explorerhome.no-ip.org/blog

  • How to enable JMS with JMQ 2.0

    I have trouble to enable jms in IAS6.0 sp2 with JMQ 2.0, on NT4.0
    The instruction and the utility batch file talked only the JMQ 1.1, but
    JMQ 1.1 is not available from iPlanet
    web site. I downloaded and installed JMQ 2.0 that does not match the ias
    instruction and utilities.
    ias utility "jmqjmsadm.bat" calls "JMQ_HOME/bin/jmsconfig.bat". The
    jmsconfig.bat does not exist in JMQ
    2.0/bin
    What is the solution?
    Thanks a million in advance
    Mike

    the actual that comes with iplanet for JMQ is not proper. Please follow the
    steps
    said in the java programmer's guide. Ref to page no 266 for enabling JMQ(i.e
    IMQ 2.0). actually i had the same problem like you but solved it by using
    guide..
    All the Best
    william
    Bangalore
    india
    default wrote:
    I have trouble to enable jms in IAS6.0 sp2 with JMQ 2.0, on NT4.0
    The instruction and the utility batch file talked only the JMQ 1.1, but
    JMQ 1.1 is not available from iPlanet
    web site. I downloaded and installed JMQ 2.0 that does not match the ias
    instruction and utilities.
    ias utility "jmqjmsadm.bat" calls "JMQ_HOME/bin/jmsconfig.bat". The
    jmsconfig.bat does not exist in JMQ
    2.0/bin
    What is the solution?
    Thanks a million in advance
    Mike

  • How to enable scanning with HP 3390 and Airport Express?

    Hey all, I've got an all-in-one HP LaserJet 3390. It's shared with all my machines by plugging in directly to an Airport Express. I then add the printer via Bonjour from each machine.
    This unit has a scanner, but I can't figure out how to scan from my Mac by placing an item to be scanned on the unit, returning to my Mac and opening the scanning utility. I get "cannot find any scanners" when I open the HP utility.
    I imagine it's because the HP scan utility seems to be set up to be installed locally rather than accessed via Bonjour (even though the printer is "network capable"). Any help?

    Sorry but that is not possible.
    The USB port on the AirPort Express (AX) is ONLY for a single compatible printer. It only supports printing. It does not support scanning or other features.

  • MOVED: Msi Gaming 9 ac X99s help with startup code 00

    This topic has been moved to GAMING Motherboards.
    https://forum-en.msi.com/index.php?topic=251661.0

    Quote from: flobelix on 22-December-14, 00:18:45
    Add a list of the components. See >>Posting Guide<<
    Carte mère : MSI X99S Gaming 9 AC
    Procèsseur : Intel i7-5820K 3,30 Ghz
    Refroidissement : H100i
    Carte Graphique : MSI GTX 760
    Mémoire Vive : G-Skill 4 x 4go DDR4-2666 Mhz PC4-21300
    Alimentation : Corsair AX860i
    Boitier : Corsair 760T Blanc et noir
    SSD : Kingston 300 V

  • How to enable UWC with SSL on Communication Suite 5?

    Sorry for asking this FAQ level question at first.
    I have watched this for almost one year but still have problem for enabling UWC + SSL + Self signed certificate.
    Would have user to login into https://abc.com/uwc then use the messenger and calendar servers from one single uwc interface, all the connections are secured.
    Is there any step-by-step procedure for reference? I appreciate for your help.
    The application software is JCS 5.
    Best regards,
    Robert
    Edited by: Robert_Chang on Apr 8, 2008 10:24 AM

    Robert_Chang wrote:
    Sorry for asking this FAQ level question at first.
    I have watched this for almost one year but still have problem for enabling UWC + SSL + Self signed certificate.Let me just point out that using self-signed-certificates are not a good idea in a production environment. They can cause a number of headaches (e.g. trust relationships between products) and don't offer the same level of security/verification as a proper CA signed cert.
    Would have user to login into https://abc.com/uwc then use the messenger and calendar servers from one single uwc interface, all the connections are secured.
    Is there any step-by-step procedure for reference? I appreciate for your help.There isn't one -- I have been meaning to write one but it's an extremely time consuming process and I haven't gotten around to it.
    Where it gets complex is if you messaging/calendar on different hosts (hence different certificate names), including LDAP SSL as well (UWC->LDAP, Messaging->LDAP, Calendar->LDAP), Outlook Connector using SSL, Access Manager using SSL, configuring SSL during initial installation vs. post-installation, renewing SSL certificates, problems when SSL certificates expire and so-on...
    I may end up writing a guide for the next release (if time permits).
    Regards,
    Shane.

Maybe you are looking for