Troubleshoot problems with installing updates on Windows Server 2012 Standart Edition

When trying to install last update, receiving next errors:
Installation Failure: Windows failed to install the following update with error 0x80070020: Cumulative Security Update for Internet Explorer 10 for Windows Server 2012 (KB3003057).
Security Update for Microsoft .NET Framework 4.5, 4.5.1 and 4.5.2 on Windows 8 and Windows Server 2012 x64 (KB2978127).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2982998).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB2993958).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3002885).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3010788).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Microsoft .NET Framework 3.5 on Windows 8 and Windows Server 2012 for x64-based Systems (KB2978121).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3006226).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3005607).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB2975331).
Installation Failure: Windows failed to install the following update with error 0x80070020: Update for Windows Server 2012 (KB3008627).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3011780).
Installation Failure: Windows failed to install the following update with error 0x80070020: Security Update for Windows Server 2012 (KB3003743).
This problem reproduced on all my web-servers (Windows Server 2012 Std). How can I fix these problems

Hi,
Windows update error 0x80070020 can occur if a program is interfering with the automatic update process.
Restart your computer or restart your computer in safe mode with network, then try to install the updates. Detailed information you may reference the link below(this applies also to Windows Server 2012 ):
You receive error 0x80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates
http://support.microsoft.com/kb/883825/en-us
If the problem still exits, open Run, type %windir% and hit
Enter, find a text file named WindowsUpdate, uploaded the log file.
Best Regards,
Eve Wang

Similar Messages

Problem with Installing and Configuring MS Server 2012 Essentials trial and MS Server 2012 Standard trial

My name is John Grace. I have been an MS customer for years. Never before in my experiences with MS up to this point have I experienced such POOR product support. Your pre-sales agents have no knowledge to offer with pre-sales config or
install issues, your support personnel are trained not to provide any reasonable help with even minor questions and concerns helping to make sure your trial experiences are progress and successful, your product support Mgrs show lack luster concern if you
need some technical direction. The first thing that is asked is do you have a support contract or credit card for this session. Now, if I am evaluating products a support contract should not be necessary as you should want customers to have good
outcomes with their trials.
I have been trying to configure test servers with the above mentioned products for the past 6 days with no success. Each install is different and the configurations some times work and some times they don't. I reach out for help in your forums,
etc., and am still at square one.
This frustrating and breeds a lack of confidence in your organization. When Bill Gates was in charge I experienced none of the nonsense today.
I have identified bugs and issues to your product teams and they gladly accept these. But when help is needed...it is send us an email type attitude. I have 8 8 core servers running windows 2008 server R2 slated for upgrading to windows
2012 server, and more after that. If I don't get the trial software to work, the upgrades are terminated.
Please give me some help or you will loose me as a customer, and customers that I installed systems for.
John Grace
(937) 286-4912
John Grace

Hi again Alan,
Thanks for the reply, i have however not been able to find any viable hotfix from MS addressing this problem so far. I only found the QFE for 2008 R2, but this is not applicable in my enviroment.
Sadly, we are experiencing the same issue with the 2008 R2 server as print server now. So the problem seems to be with the 2012 R2 RDS servers.
We have been able to narrow it down to a probable cause though:
The issue seems to be the cause of Client Side Rendering, even if it is disabled on the shared printers. We are seeing heavy bloating in the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider
The same printers are listed multiple times in subkeys for each user-SID.
The print server is listed twice under the 'Servers' key, once with just the hostname and once with the fqdn. Benath these two many of the printers are also listed multiple times.
Consequences are that printers are showing as clones for the users and they cannot set them as default printer. If they remove the printer manually, it just reappears. Setting a delete on the shared printer through GPP does not work either.
The only manual workaround we have found working is to delete the entire "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Print\Providers\Client Side Rendering Print Provider" key on the
terminal server in question, and then restart the print spooler. This fixes the problem for the user, but once they start logging off and on again, the bloating of the registry is at it once more - and the problems following with it.
In an enviroment with 70+ printers and 15 RDS servers, spread on 3 different farms, it's not a good solution though.
Any ideas?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1?

I have bought Adobe Photoshop Elements 10 last August 2013 and having problems with installing it on Windows 8.1. Why am I having this problem?

You can check you Adobe account online to see if the serial number is registered under your account. If not then your only option will likely be to contact Adobe Support directly thru chat to see if they can provide you with a/the serial number. For them to do so will require you being able to prove ownership.
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

I have problem with data transfer between Windows Server 2012RT and Windows7 (no more than 14kbps) while between Windows Sever 2012RT and Windows8.1 speed is ok.

Hi,
Regarding the issue here, please take a look at the below links to see if they could help:
Slow data transfer speed in Windows 7 or in Windows Server 2008 R2
And a blog here:
Windows Server 2012 slow network/SMB/CIFS problem
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to install device cals on Windows Server 2012 standard edition

Hello i have a windows server 2012 standard edition licence that i have taken on rent from an ISP.
i have created a domain controller on that.
By default only two users can use remote desktop to the server simultaneously.
My Requirement is 20 users can use remote desktop to the server at the same time.For that i have purchased 20 Delive CALs licences like volume licencing.
i have the licence number noted on the paper.
do i need to install remote desktop services first etc ?
Could anyone guide me step by step how can i install or configure so that 20 users can use remote desktop on the same time.

Hi,
Any update about the issue?
I would agree with others, you need to install Remote Desktop Services Client Access Licenses.
There are three methods by which you can install Remote Desktop Services client access licenses (RDS CALs) onto your license server:
• Install Remote Desktop Services Client Access Licenses Automatically
• Install Remote Desktop Services Client Access Licenses by Using a Web Browser
• Install Remote Desktop Services Client Access Licenses by Using the Telephone
https://technet.microsoft.com/en-us/library/cc725890.aspx?f=255&MSPPError=-2147217396
Then you can install both Per User and Per Device CALs onto the same license server.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I get a reliable schedule for automatic update in Windows Server 2012 R2?

I don't understand why MS broke the automatic update in Windows Server 2012 R2. In previous versions, I used to set it for automatic updates - Saturdays at 2AM. I can no longer pick a weekly update in the GUI and the time seems to have no impact on its capricious
reboots due to updates. It might happen 2 days later at noon. The best option for now is to just shut off the automatic updates but I'm reading this issue has been around since 2012 R1. There supposedly is a fix/patch for
2012 but it doesn't say if the patch is for 2012 R2 and the automatic updates haven't installed a fix that actually fixes what is broken with the automatic updates.
Why even leave the GUI for automatic updates if it doesn't mean anything?
Is there a simple registry key I can change so updates occur according to the schedule that you created in the GUI? Please no powershell - worst crutch MS ever created to not fix their own gui.
I'm seeing people have tried some advanced work around using GPO but many said those don't work reliably either on hosts or domain controllers.

This may explain:
http://blogs.technet.com/b/wsus/archive/2013/10/08/enabling-a-more-predictable-windows-update-experience-for-windows-8-and-windows-server-2012-kb-2885694.aspx
http://blogs.technet.com/b/wsus/archive/2013/06/11/wsus-blog-managing-updates-with-deadlines-in-an-era-of-automatic-maintenance.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Security Update for Windows Server 2012 R2 (KB3042553)

Hello,
Security Update for Windows Server 2012 R2 (KB3042553) has been advised to be critical update to deal with Vulnerability in HTTP.sys which could allow remote code execution.
However due to some reason I am unable to apply the patch to any of the Windows 2012 R2 servers. It errors - The update is not applicable to your computer, when tried to install manually / locally.
I tried to push it via WSUS and the patch is not getting detected by the servers.
Regional language settings are set to match Windows display language (Which is English).
Is anyone else experiencing this issue too? If so is there way to get this deployed please.
Thank you.
Kumar G

Hi Kumar,
I suggest you check the file version of Http.sys and compare it with the one documented in the KB article below:
MS15-034: Vulnerability in HTTP.sys could allow remote code execution: April 14, 2015
https://support.microsoft.com/en-us/kb/3042553
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

The MS15-10 Security Update for Windows Server 2012/R2 Essentials and the Client Restore Functionality

The MS15-10 Security Update for Windows Server 2012/R2 Essentials and the Client Restore Functionality - The Windows Server Essentials and Small Business Server Blog - Site Home - TechNet Blogs:
http://blogs.technet.com/b/sbs/archive/2015/03/13/the-ms15-10-security-update-for-windows-server-2012-r2-essentials-and-the-client-restore-functionality.aspx
FYI

Hi Susan. I hope there's a better 'fix' coming to replace this "uninstall the updates, restore, then reinstall the updates after the restore". This kind of workaround requires that all of us remember that there's a problem
with KB3023562 and KB3004375 from now until the end of WS2012E. Not sure I'll remember this 6 months from now when the problem crops up during a restore. -:(
Merv Porter
=========================

Prepare sharepoint 2010 with sp2 environment on windows server 2012 R2

HOw prepare sharepoint 2010 with sp2 environment how i install sharepoint 2010 with sp2 in a windows server 2012
i mean
from scratch i just prepared a windows server 2012 R2 vm
and i set all required roels (Appserver,webserver etc) according to this link
http://social.technet.microsoft.com/wiki/contents/articles/12502.how-to-install-and-configure-windows-server-2012-for-sharepoint-2010.aspx
and i have sharepoint 2010 set up, and i downloaded sharepoint 2010 sp2
from this link
http://www.microsoft.com/en-us/download/details.aspx?id=39672
now should i install sp2 and install sharepoint 2010 binaries?
adil

SharePoint 2010 has no supportability statement for Server 2012 R2. I would not use it until Microsoft releases a supportability statement.
Even it has no supportability for server 2012, but sharepoint 2010 running fine in my server 2012 test environment
adil
You indicated you were using 2012 R2. SharePoint 2010 supports Server 2012 (non-R2) with SP2 media, but has no supportability statement for Server 2012 R2.
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Print Management Console displays no printers after applying Windows Update for Windows Server 2012 R2 (KB2995388)

After installing optional Windows Update for Windows Server 2012 R2 (KB2995388) on a print server upgraded from Windows 2012 to Windows 2012 R2, the Print Management Console wouldn't display locally shared or remotely shared printers. Another print server
could see the printers on this server, but it couldn't see it's own. Removal of the patch resolved the issue.

Hi,
à
Removal of the patch resolved the issue.
Thanks for sharing in the forum. Your time and efforts are highly appreciated.
On current situation, would you please let me confirm something more?
Please check if this update rollup package (KB2995388) install successfully.
Please run sfc /scannow command to scan all protected system files after installed this update.
If be possible, please re-install Print Server feature on the server after installed this update. Any find?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Not able to install IIS on Windows Server 2012

I am unable to install IIS on Windows Server 2012. I get the error as shown in the below screenshot. Error code is 0x800f0922. I did RestoreHealth but that has not helped. Any help will be appreciated.

Hi Yogesh,
Just last week was installing IIS on W12R2 server and got stuck and found easy way of installing this as follow.
when you start installing IIS and at the last step as i marked on red square confirmation. there you find
export configuration settings..go to and export it to C drive and open Powershell by right clicking as open as administrator and run this from Powershell and it will install successfully.
Please let me know if you are facing any issue, since this way it has to work.
OR if you it already worked let me know or mark as correct.
Regards
Raj Navalgund
ADS/DNS/DHCP/RIS/GROUP POLICY/PowerShell/VMware/Esxi/Storage.

Assign 2 of Windows Server 2012 Standard edition licensing question

I'm new at this and I have bought Windows 2012 Standard with 5 CALs back in January from Microsoft store on the Internet using as the host. There is Windows 2008 R2 installed as the virtual machine on the host. Few hours ago I have decided to buy another
license with 5 CALs to upgrade those even that I did need two license of Windows 2012 Standard anyway to support 4 physical processor as my server have quad core processor.
The question here that I need to ask is how do I assign 2 license of Windows Server 2012 Standard edition on the host to lift the limit and that up to 4 VMs will be allowed or does it automatically do that after upgrading to Windows 2012 Standard in
the virtual machine even that 5 CALs plus 5 CALs equal 10 CALs are done automatically?

Hello,
You have 2 questions here:
1. How can I stack multiple OS licence in order to have more virtualization rights (more VMs) running on that host?
2. How can I stack Windows CAL licence from OEM.
Answers are:
1. You only have to licence the original licence on the physical host. You can use the same license key for all 4 VMs or use 2 VM key from the first package and 2 VM keys from the second licence package you just bought.
There is nowhere to register those licence, except one by one inside the VM themselves.
You have to keep all licence document in case of control by Microsoft.
2. Windows CAL allows a user (or a computer) to connect to an unlimited number of Windows Server within your company network. You have 10 CAL so you can have up to 10 users or computers in your company that will connect to your servers (even if you have 1.000
servers)
There is nowhere to register those licence, except one by one inside the VM themselves.
You have to keep all licence document in case of control by Microsoft.
Regards
PS: The only licence that require maintenance and central registration are Remote Desktop Licences.
MCITP: Enterprise Messaging Administrator 2010 MCTS: Lync Server 2010, Configuring MCSE
That is what I thought as I was told before even seen licensing details except a direction of how to attach the second license and I had to make sure. Thank you

Windows server 2012 Standard Edition Licensing

We have SPLA aggrement with MS.
I know, can use two physical processors with Windows server 2012 Standard Edition.
If i am planning to install Windows server 2012 Standard Edition in a virtual environment, lets say it has four cores, then how many licenses we need to buy for this ? Is it like each core has been considered as an separate processor in virtual environment
for Windows server 2012 Standard Edition licensing ?
Thanks,
Amit.

We have SPLA aggrement with MS.
I know, can use two physical processors with Windows server 2012 Standard Edition.
If i am planning to install Windows server 2012 Standard Edition in a virtual environment, lets say it has four cores, then how many licenses we need to buy for this ? Is it like each core has been considered as an separate processor in virtual environment
for Windows server 2012 Standard Edition licensing ?
Note that some information will be different for SPLA (so, check the SPUR to ensure you are in correct compliance).
http://www.microsoft.com/licensing/licensing-options/spla-program.aspx
http://www.microsoftvolumelicensing.com/DocumentSearch.aspx?Mode=3&DocumentTypeId=2
(if the information provided, clearly states that "this applies to all Volume Licensing programs", this also applies to SPLA, unless SPUR states differently)
(contact your reseller/partner/advisor, or MSFT VL team if you are unsure)
Windows Server 2012 R2 FAQ
http://www.microsoft.com/licensing/about-licensing/windowsserver2012-r2.aspx#tab=4
Windows Server 2012 R2 Licensing Guide
http://download.microsoft.com/download/E/6/4/E64F72BF-55E9-4D85-9EFE-39605D7CE272/WindowsServer2012R2_Licensing_Guide.pdf
Licensing Brief - Licensing Windows Server 2012 R2 for Use with Virtualization Technologies
http://www.microsoft.com/licensing/about-licensing/briefs/win2008-virtual.aspx
Licensing Brief - Licensing Microsoft Server Products for Use in Virtual Environments
http://www.microsoft.com/licensing/about-licensing/briefs/virtual-licensing.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Cucm 9.1.2 and Active Directory(Windows Server 2003 Standart Edition SP2)

Hello!
Can CUCM 9.1.2 support an integration with Active Directory(Windows Server 2003 Standart Edition SP2)? How do I have to write down LDAP Manager Distinguished Name? I can find supporting only Active Directory 2003 in documentations without reference to Operation System.

Yes, it is possible.
Check this how-to if you have any doubts about the process.
http://blog.ipexpert.com/2010/04/28/cucm-and-active-directory-integration/
http://www.markholloway.com/blog/?p=1189

I need to downgrade Product key from Windows server 2012 STD edition to Windows server 2008 ENT edition

I have a product key for Windows server 2012 Standard ROK edition and need to downgrade it to windows server 2008 Enterprise edition.

Hi,
Based on my research,
Windows Server 2012
Standard edition
can be downgrade to any prior version of Standard and Enterprise or Essentials editions.
For more detailed information, please refer to the links below:
Understanding
downgrade rights
WS2012_Licensing-Pricing_FAQ
Best regards,
Susie

Troubleshoot problems with installing updates on Windows Server 2012 Standart Edition

Similar Messages

Maybe you are looking for