Troubleshoot sql server replication
One SQL server is publisher in site A.
the other sql server is subscriber in site B.
Site A connect to Site B through network.
Replication failed sometime. Any idea why it fails from the following log? Thanks
I find following log from verbose log file:
2014-01-06 06:35:03.20 [0%] The replication agent had encountered an exception.
2014-01-06 06:35:03.20 Source: Replication
2014-01-06 06:35:03.20 Exception Type: Microsoft.SqlServer.Replication.SqlCommandTimeoutException
2014-01-06 06:35:03.20 Exception Message: Timeout expired.
The timeout period elapsed prior to completion of the operation or the server is not responding.
2014-01-06 06:35:03.20 Message Code: -2
2014-01-06 06:35:03.20
2014-01-06 06:35:03.20 Call Stack:
2014-01-06 06:35:03.20 Microsoft.SqlServer.Replication.SqlCommandTimeoutException: Timeout expired.
The timeout period elapsed prior to completion of the operation or the server is not responding.
---> System.Data.SqlClient.SqlException: Timeout expired.
The timeout period elapsed prior to completion of the operation or the server is not responding.
2014-01-06 06:35:03.20 at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
From the command line, execute this command:
netsh interface ipv4 show interfaces
You will get a table like this:
Idx Met MTU State Name
1 50 4294967295 connected Loopback Pseudo-Interface 1
10 10 1500 connected Local Area Connection
From the above table, find the Idx of the NIC connected to the public interface. In my table, it is Idx 10.
Then, set the MTU value to 1400 for Idx 10 from the command by executing this command:
netsh interface ipv4 set subinterface "10" mtu=1400 store=persistent
Do this on both publisher and subscriber.
Brandon Williams (blog |
linkedin)
Similar Messages
-
Database engine services and sql server replication failed in installation
hi im trying to setup sql server on my laptop but it says the 'database engine services' and 'sql server replication' have failed due to some specified module being missing can anyone help me out?
log file:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2147467259
Start time: 2015-03-17 10:47:47
End time: 2015-03-17 11:08:11
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SHARI
Machine processor count: 2
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS Database Engine Services
1033 Express Edition 10.1.2531.0 No
SQL Server 2008 SQLEXPRESS MSSQL10.SQLEXPRESS SQL Server Replication
1033 Express Edition 10.1.2531.0 No
SQL Server 2012
Management Tools - Basic 1033 Express Edition
11.0.2100.60 No
SQL Server 2012
LocalDB 1033
Express Edition 11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\efa3a640a9b59ee651913f55719bf3b1\x86\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Manual
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTANCEID: SHARIINSTANCE
INSTANCENAME: SHARIINSTANCE
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SHARIINSTANCE
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: SHARI\Shari Donald
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: true
Configuration file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20150317_104244\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The specified module could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xEC717F7D%400xC24842DB&EvtType=0xEC717F7D%400xC24842DB
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x80004005
Error description: The specified module could not be found.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xEC717F7D%400xC24842DB&EvtType=0xEC717F7D%400xC24842DB
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files (x86)\Microsoft SQL Server\110\Setup Bootstrap\Log\20150317_104244\SystemConfigurationCheck_Report.htmHello,
As per the log details shared, installing version is SQL server express. Please go to control panel - add and remove programs and uninstall the
SQL Server Database Engine Services Instance Features, and also Uninstall all SQL Services.
Reboot and start the start the installation with RUN as Administrator.
Thank You.
Regards, Pradyothana DP. Please Mark This As Helpful if it helps to solve your issue. ========================================================== http://www.dbainhouse.blogspot.in/ -
I ran SQL Server 2012 express setup as user with administrator privileges and still it's failing to install "Database Engine Service" and "SQL Server Replication".
Any and every ideas on how to resolve this issue is greatly appreciated.Three weeks passed and I am yet to find a fix for the the failed installation of the database engine on sql server 2012 express installation. I have tried various work-around including uninstalling, deleting all the directory paths, and reinstallation. Still
not able to successfully install sql server 2012 express.
I will greatly appreciate any and every contribution towards resolving this issue. Thanks in advance.
Here is the content of log file after the latest failed installation:
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893607
Start time: 2013-12-23 14:42:45
End time: 2013-12-23 15:07:51
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: mymachine1
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2012 SQLEXPRESS_GT MSSQL11.SQLEXPRESS_GT Database Engine Services
1033 Express Edition 11.0.2100.60 No
SQL Server 2012 SQLEXPRESS_GT MSSQL11.SQLEXPRESS_GT SQL Server Replication
1033 Express Edition 11.0.2100.60 No
SQL Server 2012
Management Tools - Basic 1033 Express Edition
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: C:\9b6607e524727c7fe1defd80\x86\setup\
Installation edition: Express
Slipstream: True
SP Level 1
Product Update Status:
Success: KB 2674319
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x86
Language: 1033
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, CONN, BC, SDK, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: <empty>
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLEXPRESS
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Manual
SQLSYSADMINACCOUNTS: MH\gt038676t
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131223_144132\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE53883A0%400xBE03358B%401306%4025&EvtType=0xE53883A0%400xBE03358B%401306%4025
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A0019
Error description: Could not find the Database Engine startup handle.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE53883A0%400xBE03358B%401306%4025&EvtType=0xE53883A0%400xBE03358B%401306%4025
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131223_144132\SystemConfigurationCheck_Report.htm -
Sql server replication from SQL SERVER VERSION(7.0) to SQL SERVER 2005
Hi All,
We are trying to create a replication between Sql server 7.0 data to SQL server 2005 data . We tried to create a local subscription in Sql server ,when tried to connect to publisher running in Sql server 7.0 it is showing an error message
like "This Sql server vresion(7.0) is not supported" .
Could any one please help us with this issue ?
Thanks
SandyHi CRM_Learner,
SQL Server version 7.0 Service Pack 4 (SP4) is the earliest version that can participate in a replication topology with SQL Server 2005. We need to verify the version of SQL Server. If you configure transactional replication with updating subscribers,
for a SQL Server 7.0 Publisher, only SQL Server 7.0 Subscribers are supported. SQL Server 7.0, 2000 was out of support in the SQL Server Forums. I suggest you install SQL Server 2005 or later version to configure the SQL Server replication.
For more information, there is a detail about using multiple Versions of SQL Server in a replication topology.
http://technet.microsoft.com/en-us/library/ms143241(v=sql.90).aspx
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support -
Hello,
I am trying to install Microsoft SQL Server 2008 R2. I get the error bellow (Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed). I already have a copy of SQL Server 2008 R2 on the machine.
I want to create a new named instance of SQL Server for some software I'm installing.
The error is below.
Any help would be much appreciated, thanks!
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -595541211
Exit facility code: 1152
Exit error code: 49957
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-06 09:14:09
End time: 2014-02-06 11:18:16
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x44D4F75E%400xDC80C325
Machine Properties:
Machine name: BAHPBZ52TY
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Database Engine Services
1033 Express Edition 10.50.1600.1 No
Sql Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1600.1 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\c7ced2c86d6b9813b28186cc831c2054\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,RS,SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: aedt2bSQL
INSTANCENAME: AEDT2BSQL
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\c7ced2c86d6b9813b28186cc831c2054\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: BAH\568385
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\SystemConfigurationCheck_Report.htmHello,
If you see error descriptioon it gives access denied so basically it is because of some access issue.I guess You must be using some domin account for installation make sure it is added as local administrator also instead of using NT Authority network
service as SQL server service account use local system account .
Below link would help
http://serverfault.com/questions/212135/access-is-denied-error-installing-sql-server-2008-on-windows-7
You can also browse to setup.exe file and RK on it and select run as administrator
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Sql Server Replication Advice - In desperate need of good advice
I am a new developer and have written an application which solves some very important problems for my company. At the moment, I am stuck on replication. I believe what I need is merge replication but before I waste any more valuable
time I wanted to ask for advice. The specific problem I am trying to solve is this. The company has around thirty marine vessels which frequently lose internet connection. The application I have written writes to a sqlserver 2012 database installed locally
on each marine vessel. When the vessels have connection, it also writes to a sqlserver 2012 database which currently resides on an azure vm. What I need to happen is this. I need the databases on the marine vessels to replicate with the remote database. I
believe that I need the local databases on the marine vessels to be the publisher and distributor and that I want the changes to be pushed to the remote server residing on the azure vm. The setup has been so hard to implement (probably because I'm still dealing
with the learning curve) that I am wondering if this is the best way to go. Any advice on whether this is the correct way to go or if there are better alternatives is greatly appreciated.
I have also tried using the sync framework, and the sql azure sync agent. I have gotten both to achieve exactly what I am after, except for one thing. The application residing on the marine vessels will create new tables. I have not found anyway to
add the new tables to the sync schema, without manually going in and setting them up. Since I will not be on these vessels, it's not really an option. If there is a way to add the new tables programmatically then the sync agent would work perfectly for me.
Thanks to all for any help.Hi,
Yes, you can configure the SQL Server replication. Replication processing resumes at the point at which it left off if a connection is dropped. If you are using merge replication over an unreliable network, consider using logical records,
which ensures related changes are processed as a unit. For more information, see
Group Changes to Related Rows with Logical Records.
These articles may be helpful:
Synchronize two tables using SQL Server Integration Services (SSIS)–Part I of II
http://blogs.msdn.com/b/jorgepc/archive/2010/12/07/synchronize-two-tables-using-sql-server-integration-services-ssis-part-i-of-ii.aspx
Synchronize SQL Server databases in different remote sources
http://solutioncenter.apexsql.com/synchronize-sql-server-databases-in-different-remote-sources/
Thanks.
Tracy Cai
TechNet Community Support -
Golden Gate SQL Server Replication
Hello Friends..
I need your help in getting some information about Golden Gate SQL Server replication. Could you guys please help me in finding an answers on how a highly transactional sql server does with clustering and replication ? How long does it take to get replica online to users ? Is there any good reading material about Golden gate sql replication? Please helpDocumentation is always a nice place to start reading:
http://www.oracle.com/technetwork/middleware/goldengate/documentation/index.html
Regarding replication, please take into account that DDL replication is only supported between oracle databases.
As for your main question, it is all based on the configuration you use. If you have much going on on the source you might add replicats to process the workload in parallel
Greetings,
NK -
I've just tried to "Submit Feedback" but the page just gives me an error which means nothing to anyone which says "You are not authorized to submit the feedback for this connection.". Why am I not authorised how do I become authorised etc
etc. Anyway :-)
I've trying to report that the stored procedure in Sql Server Replication in 12.0.2000 has an issue with data type lengths. This procedure sp_MSdetect_nonlogged_shutdown uses data lengths of nvarchar(2048) but the MSDB sysjobhistory table has a message field
length of 4000. Which causes the above stored procedure to crash.
Best Regards
RichardThis is the work around
1. Stop SQL Server service.
2. On command prompt run the following command to run the server in single user mode – be sure to replace the MSSQLSERVER with the actual instance name
C:\>”C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\Binn\sqlservr.exe” -sMSSQLSERVER -m
3. Connect to SQL server with SSMS as the server administrator
4. Run the following to change the database to the system resource database: “USE mssqlsystemresource”
5. Run the following to update the stored procedure (only change is to make NVARCHAR(4000))
SET ANSI_NULLS OFF
GO
SET QUOTED_IDENTIFIER OFF
GO
ALTER procedure [sys].[sp_MSdetect_nonlogged_shutdown]
@subsystem nvarchar(60),
@agent_id int
as
begin
declare @job_id binary(16)
declare @agent_name sysname
declare @message nvarchar(4000)
declare @retcode int
declare @runstatus int
declare @run_date int
declare @run_time int
declare @run_date_orig int
declare @run_time_orig int
declare @merge_session_id int
-- security check
-- only db_owner can execute this
if (is_member ('db_owner') != 1)
begin
raiserror(14260, 16, -1)
return (1)
end
-- Detect if the agent was shutdown without a logged reason
if UPPER(@subsystem collate SQL_Latin1_General_CP1_CS_AS) = 'SNAPSHOT'
begin
if exists (select runstatus from MSsnapshot_history where
agent_id = @agent_id and
runstatus <> 2 and
--CAC runstatus <> 5 and
runstatus <> 6 and
timestamp = (select max(timestamp) from MSsnapshot_history where agent_id = @agent_id))
begin
select @job_id = job_id, @agent_name = name from MSsnapshot_agents where id = @agent_id
end
end
else if UPPER(@subsystem collate SQL_Latin1_General_CP1_CS_AS) = 'LOGREADER'
begin
if exists (select runstatus from MSlogreader_history where
agent_id = @agent_id and
runstatus <> 2 and
--CAC runstatus <> 5 and
runstatus <> 6 and
timestamp = (select max(timestamp) from MSlogreader_history where agent_id = @agent_id))
begin
select @job_id = job_id, @agent_name = name from MSlogreader_agents where id = @agent_id
end
end
else if UPPER(@subsystem collate SQL_Latin1_General_CP1_CS_AS) = 'DISTRIBUTION'
begin
if exists (select runstatus from MSdistribution_history where
agent_id = @agent_id and
runstatus <> 2 and
--CAC runstatus <> 5 and
runstatus <> 6 and
timestamp = (select max(timestamp) from MSdistribution_history where agent_id = @agent_id))
begin
select @job_id = job_id, @agent_name = name from MSdistribution_agents where id = @agent_id
end
end
else if UPPER(@subsystem collate SQL_Latin1_General_CP1_CS_AS) = 'MERGE'
begin
if exists (select runstatus from dbo.MSmerge_sessions where
agent_id = @agent_id and
runstatus <> 2 and
--CAC runstatus <> 5 and
runstatus <> 6 and
session_id = (select top 1 session_id from dbo.MSmerge_sessions where agent_id = @agent_id order by session_id desc))
begin
select @job_id = job_id, @agent_name = name from dbo.MSmerge_agents where id = @agent_id
select top 1 @merge_session_id = session_id from dbo.MSmerge_sessions
where agent_id = @agent_id
order by session_id desc
end
end
else if UPPER(@subsystem collate SQL_Latin1_General_CP1_CS_AS) = 'QUEUEREADER'
begin
if exists (select runstatus from MSqreader_history where
agent_id = @agent_id and
runstatus <> 2 and
--CAC runstatus <> 5 and
runstatus <> 6 and
timestamp = (select max(timestamp) from MSqreader_history where agent_id = @agent_id))
begin
select @job_id = job_id, @agent_name = name from MSqreader_agents where id = @agent_id
end
end
-- If no job_id assume shutdown was logged properly
if @job_id is null
return 0
-- Get last message from SQL Agent History table
create table #JobHistory (
instance_id int NOT NULL,
job_id uniqueidentifier NOT NULL,
job_name sysname NOT NULL,
step_id int NOT NULL,
step_name nvarchar(100) NOT NULL,
sql_message_id int NOT NULL,
sql_severity int NOT NULL,
message nvarchar(4000) NOT NULL,
run_status int NOT NULL,
run_date int NOT NULL,
run_time int NOT NULL,
run_duration int NOT NULL,
operator_emailed sysname NULL,
operator_netsent sysname NULL,
operator_paged sysname NULL,
retries_attempted int NOT NULL,
server sysname NOT NULL
if @@error <> 0
return 1
-- Insert last history for step_id 2 (Agent running)
insert TOP(2) into #JobHistory exec sys.sp_MSreplhelp_jobhistory @job_id = @job_id, @step_id = 2,
@mode = 'FULL'
declare cursorHistory cursor local fast_forward for
select message,
run_status,
run_date,
run_time
from #JobHistory
order by run_date desc,
run_time desc,
instance_id asc
open cursorHistory
fetch cursorHistory into @message, @runstatus, @run_date, @run_time
select @run_date_orig = @run_date,
@run_time_orig = @run_time
while @@fetch_status <> -1
begin
-- as long as we are looking at the history for the same run
-- date and time then we should log all rows. there should
-- be 2 rows since we perform a TOP on exec sp_help_jobhistory
if @run_date_orig = @run_date
and @run_time_orig = @run_time
begin
-- Map SQL Agent runstatus to Replication runstatus
set @runstatus =
case @runstatus
when 0 then 6 -- Fail mapping
when 1 then 2 -- Success mapping
when 2 then 5 -- Retry mapping
when 3 then 2 -- Shutdown mapping
when 4 then 3 -- Inprogress mapping
when 5 then 0 -- Unknown is mapped to never run
end
-- If no message, provide a default message
-- Also overwrite all inprogress messages to be "See SQL Agent history log".
-- This is to prevent "Agent running. See monitor" to be logged into repl monitor.
-- In this case (the last job history message is InProgress), we know that
-- there have been failures of SQL Server Agent history logging.
-- In fact, the only possible "in progress" msg in SQL Agent job step
-- history for push jobs is "Agent running. See monitor". It is confusing that those
-- messages showed up in repl monitor.
if @message is null or @runstatus = 3
begin
raiserror(20557, 10, -1, @agent_name)
select @message = formatmessage(20557, @agent_name)
end
if UPPER(@subsystem collate SQL_Latin1_General_CP1_CS_AS) = 'SNAPSHOT'
exec @retcode = sys.sp_MSadd_snapshot_history @agent_id = @agent_id, @runstatus = @runstatus,
@comments = @message
else if UPPER(@subsystem collate SQL_Latin1_General_CP1_CS_AS) = 'LOGREADER'
exec @retcode = sys.sp_MSadd_logreader_history @agent_id = @agent_id, @runstatus = @runstatus,
@comments = @message
else if UPPER(@subsystem collate SQL_Latin1_General_CP1_CS_AS) = 'DISTRIBUTION'
exec @retcode = sys.sp_MSadd_distribution_history @agent_id = @agent_id, @runstatus = @runstatus,
@comments = @message
else if UPPER(@subsystem collate SQL_Latin1_General_CP1_CS_AS) = 'MERGE'
exec @retcode = sys.sp_MSadd_merge_history @agent_id = @agent_id, @runstatus = @runstatus,
@comments = @message, @called_by_nonlogged_shutdown_detection_agent = 1, @session_id_override = @merge_session_id
else if UPPER(@subsystem collate SQL_Latin1_General_CP1_CS_AS) = 'QUEUEREADER'
exec @retcode = sys.sp_MSadd_qreader_history @agent_id = @agent_id, @runstatus = @runstatus,
@comments = @message
if @@error <> 0 or @retcode <> 0
return 1
end
fetch cursorHistory into @message, @runstatus, @run_date, @run_time
end
close cursorHistory
deallocate cursorHistory
drop table #JobHistory
end
6. Return the system resource database to read-only – “alter database mssqlsystemresource set read_only”
7. Shutdown the instance – “shutdown”
8. Start the instance using the service as usual -
hi,
what sql server replication? Differenent type server replication?
thanx
subodhaFor SQL Server, I'd start looking through the MSDN documentation which is available here: [SQL Server Replication|http://msdn.microsoft.com/en-us/library/ms151198(SQL.90).aspx]
Hope that is helpful,
J. Haynes -
Network requirements for SQL Server Replication
Hi,
Can any one tell me what is network requirements for SQL Server replication.
I have successfully configured the replication on LAN with active directory but I am unable to configure it on WAN.
Can anyone tell me how WAN can be configured for sql server replication.
Any help in this regard will be highly appreciated.
Regards,
Muhammad ImranHi Muhammad,
In addition to Prashanth’s post, please also check the following things to optimize SQL Server replication with a WAN link.
• Initialize the Subscriber from a backup.
Publishing the execution of stored procedures as opposed to replicating each operation performed by the stored procedure.
Leveraging Subscription Streams.
For more information, please review the following blog:
http://sqlblog.com/blogs/argenis_fernandez/archive/2011/05/31/transactional-replication-and-wan-links.aspx
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
SQL Server Replication Monitoring
I wanted to enable SQL server Replication monitoring
I checked online and found
http://blogs.catapultsystems.com/cfuller/archive/2010/11/10/enabling-sql-replication-monitoring-%E2%80%93-what-to-expect-in-the-replication-views-in-opsmgr.aspx
After i setup monitoring by enabling the discover by overrides the Distributor state became healthy and being monitored. However it shows Not Monitored state for Publication, Publisher and subscriber state
do i have to configure something else as wellIf the discovery jobs are enabled they should appear as monitored.
Could be that the discovery did not yet fully run.
I would:
Review the health explorer for the systems
Review the discovery status
Another view on the subject:
http://www.sqlmag.com/article/monitoring-and-analysis/monitor-sql-server-2008-with-opsmgr
After reviewing the management pack guide here:
http://www.microsoft.com/en-us/download/details.aspx?id=10631
It is stating on page 51 you need to enable the discovery for the different objects seperately. So maybe check into that as well...
It's doing common things uncommonly well that brings succes. -
Hi,
Using SQL Server Replication, data pulling from Sybase to SQL Server is possible or not?
--sybase has publisher and sql has subscriber
ThanksHello,
Just as Hilary post, you should backup the following database and restore to the new server:
1.The publication database at the Publisher
2.The distribution database at the Distributor
3.The subscription database at each Subscriber
4.The master and msdb system databases at the Publisher, Distributor and all Subscribers
After restoring the publication database from a backup, you reinitialize all subscriptions to the publications.
Reference: Strategies for Backing Up and Restoring Merge Replication
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
Sql server replication server SLOW
My team has been troubleshooting this for months now. Sql Server 2008 r2
Our Main DB & server is on "server A" and is a physical machine with a single virtual instance on it, it does not share with anyone, it has its own physical hard drives and has 20 gb memory and hosts our 1 terabyte DB and is very fast which
is perfect. It performs nightly loads of data which users access throughout the day. it is not a transactional db, more of a data warehouse db.
our second sql server, "Server B", has the exact same specs, actually we doubled the memory since it was slow to 40 gb memory and its still 4 times slower than server A!!! only difference is the hard drive is on a SAN, which I am told is
state of the art, fast, etc...
we setup replication on ServerA to replicate to ServerB. The distribution DB is on ServerB as well.
We did a test where we shut down the distribution DB since it seems like that takes up about 30% of the cpu usage, and the queries we ran are still 4 times slower!
Our next step is we are going to try and put the Distribution DB which is on ServerB on its own volume.
and then next step is to try and put Server B on its own server (not sharing with any other companies) with its own physical hard drives like server A is.
Can anyone offer some insight, help, thoughts, etc. thank you.Hi Hilary,
This is most likely due to IO. SANs are NOT all the same. Typically you should not use ISCI for SQL Server deployments. As the number of NICs required, the number of HOPs, management, network configuration and server configuration can be difficult
to align and defend in support of SQL Server deployments. Note: this is true of ALL database servers..
However, the first thing you need to do in order to identify if there are any Disk Related IO Bottlenecks is to collect performance metrics on the 2 environments. Start with Server A and then implement the same performance counters on Server B then perform
the 4 queries capture the information from both servers and compare.
Data to Collect
There are numerous counters available in perfmon. We recommend that you collect data from the following counters when you are analyzing characteristics of a SQL Server workload. These disk-specific counters are listed under the LogicalDisk
section of the available counters. (The PhysicalDisk counter object may show the same values if there is a 1:1 relationship between a logical volume and disk.) The LogicalDisk object reports volume letters or mount point names (rather than disk numbers) and
it can provide a finer level of granularity if there are multiple volumes on a single Windows disk.
Counter Description LogicalDisk Perfmon Object
Disk Reads/sec - Disk Writes/sec = Measures the number of IOPs.You should discuss the expected IOPs per disk for different type and rotational speeds with your storage hardware vendor.
Typical sizing at the per disk level are listed below:
10K RPM disk – 100 to 120 IOPs
15K RPM disk – 150 to 180 IOPs
Enterprise-class solid state devices (SSDs) 5,000+ IOPs
Average Disk sec/ Average Disk sec/Write = Measures disk latency. Numbers vary, but here are the optimal values for averages over time:
1 - 5 milliseconds (ms) for Log (ideally 1 ms or less on average)
Note: For modern storage arrays, log writes should ideally be less than or equal to 1-2 ms on average if writes are occurring to a cache that guarantees data integrity (that is, battery backed up and mirrored). Storage-based replication and disabled write
caching are two common reasons for log latencies in the range of 5 or more milliseconds.
5 - 20 ms for Database Files (OLTP) (Ideally 10 ms or less on average)
Less than or equal to 25-30 ms for Data (decision support or data warehouse)
Note: The value for decision support or data warehouse workloads is affected by the size of the I/O being issued. Larger I/O sizes naturally incur more latency. When interpreting this counter, consider whether the aggregate throughput potential of the
configuration is being realized. SQL Server scan activity (read-ahead operations) issues transfer sizes up to 512K, and it may push a large amount of outstanding requests to the storage subsystem. If the realized throughput is reasonable for the particular
configuration, higher latencies may be acceptable for heavy workload periods.
If SSD is used, the latency of the transfers should be much lower than what is noted here. It is not uncommon for latencies to be less than 5 ms for any data access. This is especially true of read operations.
Average Disk Bytes/Read - Average Disk Bytes/Write = Measures the size of I/Os being issued. Larger I/Os tend to have higher latency (for example, BACKUP/RESTORE operations issue 1 MB transfers by default).
Current Disk Queue Length = Displays the number of outstanding I/Os waiting to be read or written from the disk. Deep queue depths can indicate a problem if the latencies are also high. However, if the queue is deep, but latencies are low
(that is, if the queue is emptied and then refilled very quickly), deep queue depths may just indicate an active and efficient system. A high queue length does not necessarily imply a performance problem.
Note: This value can be hard to interpret due to virtualization of storage in modern storage environments, which abstract away the physical hardware characteristics; this counter is therefore limited in its usefulness.
Disk Read Bytes/sec - Disk Write Bytes/sec = Measures total disk throughput. Ideally larger block scans should be able to heavily utilize connection bandwidth. This counter represents the aggregate throughput at any given point in time.
SQL Server Buffer Manager Perfmon Object = The Buffer Manager counters are measured at the SQL Server instance level and are useful in characterizing a SQL Server system that is running to determine the ratio of scan type activity to seek
activity.
Checkpoint pages/sec = Measures the number of 8K database pages per second being written to database files during a checkpoint operation.
Page Reads/sec = Pages reads/sec measures the number of physical page reads being issued per second.
Readahead pages/sec = Read-ahead pages/sec measures the number of physical page reads that are performed using the SQL Server read-ahead mechanism. Read-ahead operations are used by SQL Server for scan activity (which is common for data
warehouse and decision support workloads). These can vary in size in any multiple of 8 KB, from 8 KB through 512 KB. This counter is a subset of Pages reads/sec and can be useful in determining how much I/O is generated by scans as opposed to seeks in mixed
workload environments.
Cheers,
-Ivan -
Security issue in SQL Server replication in SQL 2008 Express edition
Hi,
I am trying to do merge replication through web sync in SQL server 2008 express edition. i tried the merge replication using RMO with C# code but no luck. i am getting the security related error.
my Publisher and distribution are on SQL server 2008 R2 Standard edition. machine name "Printserver",
I created subscription on SQL server 2008 express edition.
I hosted the web service for merge syncronization on another machine named "ANUJVMWIN7".
I installed SSL cerificate on all the machine (server, hosted server and subscriber machine.)
here is the error description.
The upload message to be sent to Publisher ‘PRINTSERVER’ is being generated
The merge process is using Exchange ID ’0B23EBE2-D502-4D92-A9A1-88B8F738CFFC’ for this web synchronization session.
A security error occurred
A security error occurred
The Merge Agent could not connect to the URL ‘https://ANUJVMWIN7.prospecta.in/WebSyncTest/replisapi.dll’ during Web synchronization. Please verify that the URL, Internet login credentials and proxy server settings are correct and that the Web server is reachable.
The same process i tested with the SQL server 2008 standard edition and all the things are working fine. i could able to merge the databases but no luck with SQL 2008 express edition.
Please help.
Thanks
Anuj Sharma
Thanks Anuj Sharma Software EngineerHi Brandon,
I am not using self signed certificate. I installed SSL certificate provided by RapidSSL CA. This certificate is installed on my publisher machine ("Printserver"),
web hosting machine ("ANUJVMWIN7") and my subscriber machine as well.
Here are the certificate details which i installed on each machine.
Thanks
Anuj Sharma
Thanks Anuj Sharma Software Engineer -
Oracle 8i to MS SQL Server replication
Im new to Oracle, but a MS SQL Server DBA. Im helping in the architecture of a data warehouse that pulls from some disparate sources, including Oracle 8i, into a SQL Server 2000 box. We could use batch processing to pull updated data from the Oracle database to populate our data warehouse, but we were hoping to get real-time transactional processing via some replication scenario. My terminology may be wrong from the Oracle perspective, but I think the transactional replication that SQL Server supports is called synchronous replication in Oracle. My question is, does anybody know how to do synchronous replication from an Oracle server to a SQL Server? Or perhaps which Oracle product supports it? Thanks!
null===========================================================
I'm working on the similar requirements, exactly my source DB is DB2, and the target DB is Oracle. I have two year experience with Oracle, but I know nothing about DB2. There a about 50 tables in source DB. Transactions on source DB is not too heavy(less than 10/Second), and the mainfram are all powerful.
I've though about Oracle Gateway, but I'd rather save it as the backup solution. For one thing, neither co-workers nor I have experience with it. Second, I'm afraid the Gateway performance would not be satisfactory. Furthermore, words has it that we should pay for the Gateway. So My ideas to real-time replication of the two DB is as following:
(1) use trigger in DB2 to reponse to immediate transactions in source DB;
(2) use Embedded C/SQL to extract those transactions into flat files;
(3) FTP files to the target server;
(4) On target server, SHELL scripts read the files and call Pro*C to apply the transactions into Oracle DB.
but, some problems really get me.
A: in step(1) and (2), How to set EC to do its work in reponse to trigger? I know that one can call host script in Oracle trigger, but I have no idea about DB2 trigger. Maybe, I can create a real-time monitoring EC process to address it. what's your opinion?
B: I should maintain all transaction metadata by myself. e.g. INSERT, UPDATE old/new data, DELETE info. It is originally covered by the database, and it isn't easy to handle it squarely.
C: How to address some exception? like database rollback, the process recovery in case of any interruptions in the above steps.
Could you share me some idea, Thank you!
eilison
[email protected]
Maybe you are looking for
-
[Forum FAQ] Show Attachments in SharePoint 2013 Custom List View
Introduction: By default, there is an Attachments column in the SharePoint List, some people want to display attachments name and click name can open the documents in List View. In this article, we would show you the method with REST API, JSLink and
-
Hi, guru free goods problem
Hi Sap gurus, I want to give scheme (Free Goods ) Buy 1family pack(in which two tooth pastes will be there & i have to get 1tooth brush as free.) with lower price how do i configure that. Thanks in Advance
-
When I export a photo, iPhoto crashes
Hi, I have a problem with exporting photos from iPhoto. This is what it says. Does anybody recognize this problem and can give me some advise how to solve it. Thanx in advance. Process: iPhoto [681] Path: /Applications/iPhoto.app/C
-
I am trying to output file in CSV format. Everything works beautifully except Fiscal_date (format yyyymm); with cutoff on Sept of each year. I have codes that "interpret" the *:control.begin_date* (format yyyymmdd); if it's Sept, it'll be 201201. I a
-
it is the values we enter into a form and when we try to fill the form again we get those values. i want to delete those