Troubleshooting Ipad Imovie export problem

I made a short music video in Imovie and it won't export at all. I have done a few other projects without any issues. When I try to export it to camera or youtube it just sticks on "export" and won't progress. No error message is given. There was a recent Imovie app update, and this is the only project I have done. However, I tried to save an older project, that was not as video intensive, and it exported just fine. The project is only about 3 minutes long. All of the video was downloaded as mp4s from videoblocks.com.

Hi
Error -108
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
But it can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W

Similar Messages

IMovie exporting problem! Please someone help, I have a deadline.

Hello, I've been having a problem with exporting my movie to my camera roll. I recently filmed a wedding video and started editing it on iMovie for iOS because i'm most comfortable with this program.
I edited the beginning and wanted to export the 3 min part to my camera roll so i could later add speeches to it. The loading keeps getting stuck at the same spot not even half way. I'm currently running the latest software iOS 7.1.1 on an iPad 3 32gb. I cleared some extra space which left me with 3.2 GB and I still experienced the stopped loading bar. I tried turning it off and on closing the app completely and it didn't help one bit. I'm not deleting it because I will have to start all over and my deadline is at the end of July. Someone Please Help! My support has expired from apple and $20 is way to much for a small problem like this. I would appreciate some help on "saving" this couples wedding video!

You you can layer in the speeches, from audio or from another video without losing the background sound. You can also adjust the volume of the fore and background sound to get the right blend.
the instructions are a bit hard to follow, but I was able to layer a vocal only, from one video clip, over the another clip at the point I selected. I was also able to adjust the volume to balance the sound to my liking.
these instructions are available within the app....
Add just the audio from a video clip
With your project open, scroll the timeline so that the playhead (the white vertical line) appears where you want to add the audio clip.If the playhead is resting over an existing clip, the new clip is added either before or after the existing clip, whichever is closest to the playhead.
Tap Video on the right above the timeline.All your video clips appear in the media library above.Note: If your iPad is in portrait orientation, first tap the Media Library button in the upper-right corner, then tap Video at the bottom of the media library.
In the media library, do any of the following:
To preview a clip before adding it to your project: Tap to select a clip, then tap the Play button .You can also swipe your finger left and right over a clip to manually preview it, which can help you identify exactly which part of the clip you want to use.
To sort clips by date: Tap the disclosure triangle at the top of the media library, then tap Oldest First or Newest First.
To show only unused or favorite clips: Tap the disclosure triangle at the top of the media library, then tap Favorites or Unused.If you want to mark a clip as a favorite, tap “Find more favorites” and follow the instructions in Review and share video clips.
In the media library, tap the video clip, then tap the More Options button .
Tap the Audio Only button .

IMovie Export Problems - PLEASE HELP !!

I have assembled a 3 hour movie in iMovie. I have tried to export approx. 20 times with no success. I have duplicated and renamed the project - deleting the original, this still does not work. I attempted to use Screenflow to record the movie playing in full screen playback - the playback crashes approx 20 mins in. I have tried to play the project within iMovie and record the preview screen (on largest size available) and it crashes approx 30 mins in. I am in despair as I have worked on the content of the movie for approx 2 years.
Tech Info
I have upgraded to Mountain Lion during the creation of the movie.
I have updated iMovie when updates are available.
I have 12GB RAM on board.
Hard Drive (1TB) is has approx 280GB free.
iMac - Oct 2011 - 27"
Really appreciate it if someone could help. Obviously I will not bin the project but am definitely looking for an easier fix than recreating the entire movie as I do not know if this is possible, both technically and mentally with the time that was put in already.
Thanks in advance

If you have Time Machine running, turn it off whenever you are exporting a project (and remember to turn it back on after the export is complete).
Additionally, try splitting the project into two parts (or maybe three or more). Keep the duplicate you created earlier from the original so that you have at least one full copy of your project intact. Now create two (or more) duplicates and rename them appropriately (such as My Project Part 1, My Project Part 2 and so forth).
Delete the second half from the first duplicate (My Project Part 1). Delete the first half from the second duplicate (My Project Part 2). If you created three or more duplicates, then break them up into the relevant segments by deleting appropriate sections.
Now try to export one project at a time. Hopefully, iMovie will be able to handle the shorter projects. If one of the projects fails to export, there may be a corruption in that project file. Splitting that project further may help to isolate the problem.
You may, of course, end up with several exported project files (movies), but at least you will have something for your efforts. If your intention is to burn a DVD, you can include them as separate movies on the DVD, but bear in mind that for a single layer DVD the total running time is limited to 2 hours when using iDVD (including menus). If publishing to the web, you could upload them as separate "episodes" or the like.
TIP: When splitting up the project into shorter sections, you could add an appropriate title to the end and/or beginning of each section before exporting (such as, "End of Part One" and "Part Two" etc.) to avoid an abrupt end or start for each section.
John

IMovie export problem (error -108)

Just wondering who out there is experiencing problems with finalising and exporting projects in iMovie 11. I may have found one reason for this problem. I've been playing around with the video effects and when I export a simple 20 second clip with using the "Hard Light" effect I have problems exporting. I changed the effect to something else, "Vignette", for example, and it exports fine! Has anyone else found this or maybe if you're having problems, try to export the movie without having used the effect. It would be interesting to hear if there's a problem with using the "Hard Light" effect. I've just bought the latest MacBook Pro 13" 4GB 2.4GHz with Lion 10.7.3.
Thanks

Hi
Error -108
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
But it can mean many thing's - My first thought is
• Free Space on Start-Up hard disk. How much ? (other disks do not count)
Yours Bengt W

Imovie export problem

hello
I would like to come and post this message because I do not know what to do, I have a Macbook Pro mid-2010 comes with Snow Leopard I installed mavericks and therefore the new iMovie version month everything worked except fan which runs at the bottom when I exportais my videos but since 4 days not use iMovie, I had in message "application not responding" I had to force quit .. so I reinstalled everything the OS X and mavericks and iMovie starts now but I can not export my montages, the application quits unexpectedly with a long list of errors.
Have you experienced the same problem?
This comes from my computer or iMovie?
Thank you for your help
friendships
Marilys

Your're welcome,
Each system takes indeed it's own learning-curve.
iMovie 10 is a totally new ball-game, (even for longtime Apple users ).
You have the "luck" to step in into a brand new redesigned iMovie, which has great potential, but needs to grow also.
Personally I don't get the concept of the Teather (which is new to iMovie 10) and the use of of it with the very limited iCloud (for this purpose), You are better of with Vimeo or Youtube, or share your project as a file or to iTunes for your home-usage.
I am not using the Theater-function as it doesn't suit my purposes at all.
All in all I love the latest version though.
Have fun
Ben

IPad Garageband export problem

My ipad GB songs have always exported perfectly to my pc via email and soundcloud. I recently 'renamed' some...and now when I email or upload to soundcloud...they come out muffled on both. This only happens on my PC. If I open my email or soundcloud with my iPhone or iPad, they sound fine. Have no idea why?
The only other manipulation of the tracks other than renaming them was 'selecting all' of the tracks within a song and moving them a measure or two to give a few seconds of silence before the track kicked in.
Other older exported tracks that I did not rename still play fine on my PC.
Thanks so much for any help anyone can provide. Really want my songs to work on soundcloud for PC users.

radlinda wrote:
When I export a track, it does not export the exact size.
http://www.bulletsandbones.com/GB/GBFAQ.html#exportexactlength
(Let the page FULLY load. The link to your answer is at the top of your screen)

Our picture transfer from iphone, ipads and or Sony DSC-W150 camera ended when we changed int providers from xfinity to frontier. All attempts to troubleshoot have not corrected problem, HELP!!

Our picture transfer from iphone, ipads and or Sony DSC-W150 camera ended when we changed int providers from xfinity to frontier. All attempts to troubleshoot have not corrected problem. The only changes to the system that was functioning properly are Fios int service and router. All apple components are using the fios router. Can anyone Help get us up and running again? Thanks

How have you been making the physical connection from:
iPhone
iPads
Sony DSC-W150 camera
...to your Mac?
If WiFi, have you changed the WiFi encryption method or WiFi password? If so, each device need the new information netered into it manually to get onto your "new" WiFi Network.

IPad WiFi Connection Problems - WiFi Symbol Appears With Full Bars but I Don't Get A Checkmark?

I was using the iPad one day and then all of a sudden it stopped connecting to the internet. The network at this hotel is very good and I've asked them about their router so it is not the router's problem.
I go to the Settings and tap on Wi-Fi then I tap on the hotel network. After a few seconds, it says the network name beside the Wi-Fi tab and it gives me the WiFi symbol showing 3 bars. But then I never get the checkmark or tick saying everything is connected. I try going online and it says the iPad is not connected to the internet. I've tried an iPhone and it connected and got a checkmark in a few seconds. I've talked to the front desk and he took out his phone and showed me that he could connect, he even opened a page without any problems at all.
I've been trying to find a solution for this for a long time. I've been searching Google over and over again. I turned Airplane Mode on for 1 minute, I've tried Resetting my Network settings, I've tried forgetting the network and reconnecting again, I've tried removing all restrictions from the iPad, I've rebooted the iPad A LOT, etc.
So this is my problem for people who don't want to read the whole message:
1. I can't connect to the internet with the iPad
2. It shows the WiFi symbol saying its connected but I never get the checkmark or tick.
3. It's not the router problem.
4. I've tried other networks and it doesn't work. It just keeps on showing that loading circle right beside the network name.
5. Do any of you know what this problem is? Or do you have a solution?
Thank you for reading this and have a great day

Since you are in a hotel, some of these are not applicable.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

IPad 2 Wifi Problems after upgrading to iOS 6

I Updated my iPad 2 to ios6 then day iOS6 was released, ever since then i have been unable to connect to the wifi. I've reset the network setting and the wifi works for about 5 minutes until i go on any apple app ( itunes, app store, maps etc). I've reset the Network settings more than once, I've turned the HTTP proxy to auto, I've pressed Renew Lease, I've unplugged the wifi, and I've pressed Forget this network. Reluctantley i updated my ipod touch 4 gen to see if iOS 6 was the problem and I now have the exact same problem on my ipod touch. Someone Help!!

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Low quality in iMovie Export

iMovie is a great program. Unfortunately the export quality is not very good. I have tried several codecs (Apple Intermediate Codec, H.264, ++), but the result is drastic quality reduction. Very visible in dark areas and peoples faces were the no. of colors are too low. Filesize is reduced too.
The imported file (from Sony Handycam HD (CX550)) is an apple intermediate codec and the quality is great.
When exporting from iMovie useing Apple Intermediate Codec the quality setting is "medium" with no option to change this.
I also use Final Cut Express which gives much better export quality. But the program is not as intuitive and easy to use so I prefer iMovie.
The solution is to edit the movie in iMovie, export the project to Final Cut (by XML) and export QuickTime movie. With XML export all fancy transmissions are lost, but the picture quality is great. The final movie file is 3-4 times larger.
Anyone with similar experience or a solution?

I have exactly the same issues
'Very visible in dark areas and peoples faces where the no. of colors are too low. Filesize is reduced too.'
In light you won't notice but the dark is just terrible.
Important: It has not to do with interlace. Interlacing is not the problem. It's the dark areas en people faces!
I thought I found the solution.
Wat I did was:
- Export as Quictime Apple Intermediate Codec
- > If I use the Dimensions 'HD 1920 x 1080 16:9" it was terrible
If I use the Dimension '1920 x 1080 HD' it was perfect.
(Also I set the compressor to 'other' and 'interlaced' and 'top field first')
But the strange thing is: When I do it on a small piece of footage. It works perfect. When I do it on a longer project: the footage is crappy again.
I worked a week on different home video stuff and it's not fun to see this decrease of quality.
I didn't missed a toppic where someone found the solution?
I will keep you informed about my investigations...

Ipad mini wifi problems

I've changed my wifi password, but my ipad mini still remember the old one. Therefore, I cannot connect to wifi, but my mac book is okay with it. I tried to reset the internet settings, but my ipad mini doesn't allow me to verify my password!

The wifi password is usually printed on the router's label.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

IMovie exports only sound to camera

Good evening everybody!
In the past I successfully exported projects to my camera.
For the first time I got this problem: iMovie exports the sound, but freezes the first frame of the movie and leaves it at that.
I tried it in two ways: by "send to camera" and by "show video on camera monitor" and simply pushing the "record" button of the camera.
When I loaded a different movie and did exactly the same thing, all went well.
Back to my new film: the same again.
What's different with my new film?
Has anybody got an idea? I'd appreciate any help!
Greetings from the middle of Germany
Torsten
G 5 Mac OS X (10.4.3)

Hello Sir Torsten,
Glad you got it to work. I really think that Apple never intended for us to make long complex movies...I think they though iMovie would be a fun app to make short little entertaining movies so they didn't carefully investigate all the nuances before releasing it.
For the most part, iMovie has worked great for most people. Just reading these discussions you can get some idea of the various projects that are being created and it is really remarkable from such a simple program. And, the other fantastic thing to remember is that so many of the problems we encounter DO have solutions or work-arounds!
BTW, it is now cooler and wetter here, too

Ideal iMovie export settings for iPhone?

What is the proper setting for iMovie exports to the iPhone?
Obviously 480x320 is the desired target resolution, but I tried using "Quicktime" and encoding in h.264, but the video is not viewable on the iPhone. Alternatively, in selecting MPEG4, oddly h.264 was greyed out as not an option.
Anyone? I know the "iPod" settings work, but that is not the ideal iPhone screen resolution.
blakespot

I had the same problem getting iMovies over to my AppleTV and found a solution that works for iPhone too.
In iMovie click: Share>Share...>Quicktime (at top of box)>Expert Settings (under Compress Movie For)>Share (button at bottom of box)>Movie to iPhone (on Export: pick list). Click Save at the bottom of the dialog and you're off!
I used this to convert several of the movies I had on my AppleTV and put them on my iPhone.

TS3274 Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?

Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?

Hi Fayed11,
Welcome to Apple Support Communities.
You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/ts1702
Have a great day,
Jeremy

My iPad is having problems with our wifi.

There are three bars up in the left of the screen but when i go into the wifi settings it has a spinning circle and no check mark. I can not use the internet in safari or in any of my apps. The same thing happens with my iPod, my Mom's ipod, and all of my sibling's ipods.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Troubleshooting Ipad Imovie export problem

Similar Messages

Maybe you are looking for