Troubleshooting when restarting using third parties application ?

HI Everyone,
I'm having some problem when using Drive Genius 3 as example ,
When i'm tryin to defrag my disk it says that I need to restart my computer , when i'm doing it it only close my current session instead of restarting my whole computer .
And when i'm tryin to restart it normally with the good old : Apple - Restart . it is working fine
Can someone explain my why when i'm using drive genius this is not working ? !
Thanks in advance
I'm running on an Imac with Lion
1tb : 400gb used

PierB wrote:
However, one functionnality i need to implement and am stuck on is, when the user wants to read an email, clicking on said email is supposed to open the Sun Convergence client/interface. The same behavior is expected when the user wants to reply, forward or open the inbox from the portal's widget.
My questions are the following:
- How would I go about opening a Sun Convergence session with the user's login/password through a url for instance?You can leverage single-sign-on functionality for this. If you are using Sun Access Manager/OpenSSO with your portal interface then Convergence provides a SSO plugin for these.
If not, you can write your own custom SSO plugin:
http://wikis.sun.com/display/CommSuite/Writing+a+Pluggable+SSO+Module+for+Convergence
- Once logged in, how do i open the Sun Convergence in Messaging mode (if it isn't already) ?This functionality doesn't exist. I've created a new "Request For Enhancement":
RFE #6866720 - "Provide ability to determine startup service based on url parameter".
A related existing RFE is :
RFE #6550438 - "Support Compose URL".
- Once in Messaging mode, how do i open the correct email?This functionality doesn't exist and would be complex to implement. You will need to bring this (and the other RFE's I mentioned) up with your Sun Account Manager. If you have a suitable business case then it may be implemented in a future revision of the product.
Basically, what i'm looking to do is to control Sun Convergence through command line-type instructions rather than by using the mouse.Convergence was not designed with this requirement in mind.
Regards,
Shane.

Similar Messages

I have two apple id accounts ,when i used to update application it used to prompt a default id and if the application was downloaded using the other id i would cancel and it would prompt the other id but not any more .

i have two apple id accounts ,when i used to update application it used to prompt a default id (the old one) and if the application was downloaded using the other id i would cancel and it would prompt the other id but not any more .
it just prompt the old id which im not signed in with im signed in using the new id and when i cancel nothing happens and when i try to update applications separately i have the same problem .
im signed in using the new id
the old one is my wife's so i can't delete it
the problem happens when i update all or each application by its own
using ios 5.0.1 on a iphone 3gs
the applications are downloaded using both the new and old id's
any help will be greatly appreciatedِ

These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums - I've asked the hosts to remove yout account ids from your post.
In terms of combining accounts it's not currently possible to do so, nor to copy/transfer content from account to another.

Virtual Preload agreement/ Third parting applications Please help!

Hi I am new to blackberry and smart phones. I have a Blackberry Curve and when I try to play games or other thing it is asking me this....
If you agree to the conditions set out below by clicking “I Agree”, you will be linked to a third party site (“Linked Site”) not under the control of Research In Motion Limited or its affiliates (“RIM”). RIM is offering this link to the Linked Site solely as a convenience to you, on the understanding that providing such link does not imply any endorsement by RIM of the Linked Site or its information or contents, nor does it imply any association between RIM and the Linked Site’s operator. Also, any dealings with third parties conducted through the Linked Site are solely between you and such third party. Any software application that you may download or otherwise acquire from the Linked Site for use on this handheld device is not licensed by RIM and is “Third Party Software” under the license agreement under which you, or the entity who authorized your use of this handheld device, originally licensed RIM’s proprietary software for this handheld device (“License Agreement”), and as such its use may be subject to certain terms and conditions established by a third party. Please carefully review your License Agreement to understand your rights and obligations. If you do not agree to the conditions set out here or do not wish to be linked to the Linked Site for any reason, do not click “I agree” below and please return to the home screen.
I have read this about a million times and I have no idea what it is telling me. I need help understanding this more and I am also wondering is this going to cost money to agree to it and what it is linking me too

Hi and Welcome to the Community!
The lawyers sure got ahold of that one, didn't they?!?!? All it is really saying is that, if you go to that linked site/3rd party app, RIM has no liability for whatever that linked site/3rd party app may do. When you agree, you absolve RIM of liability and agree that, no matter what, you will not seek any recourse from RIM. RIM has zero control over what that other site/app may do...anything they do is 100% between you and them, and RIM has no involvement (nor liability).
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Using third part loops in Logic : bpm changes not following by the loop

i use lots of third part loops. with other audio soft when i choose a loop and drag/drop it to my project, the loop follow every change of the project (for exemple changing the bpm). In logic, when i do so, the loop do not follow project changes such as bpm.
Someone do knows how to fix my problem ?

I just found that you can drag/drop your third part loops from the Finder window where they are to the "Media/loops library" in Logic. By this way Logic recignize your loop as apple loop. But it works for apple loop third part loop and not for wav third part loop. For those you have to transform them by the "Apple loops utility" given with Logic. It's a bit long with big loops database but it's the first way I found.
If someone know a quicky way, I'm interested

Backup/Restore won't reload third part applications, why?

This completely doesn't make sense to me. What is the use of having a backup/restore function if the entire device is not actually backed up and restored? Apparently this is just the databases? Well, what good are some of the databases, if the restore feature isn't restoring the applications that use those databases? This seems liek such an utterly useless feature without the applications.
There is even an option when choosing Reload Device Software, saying backup and restore third party applications, yet this only seems applicable when completely reloading the device software, and not when attempting to transfer from one failed blackberry to a new one.
The applications are even in a folder on my computer, yet I cannot install them to the device. How can I install these?

Hello Pixonti,
Have you had a chance to try the Switch Device Wizard?
Here is an article that will show you how to use it using BlackBerry Desktop Manager 6.0
Here is an article that will show you how to use it using BlackBerry Desktop Manager 5.x
-tg
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

BO DI integration with an third part application

Hi All,
I have to right an adapter to integrate data from an third party application. Can anyone help me in this to start?
I want that my DI job should read data from this third party application and can write data into this third party application. This third party application will provide us APIs in order to get/send data to this app.
So, how can I achieve this. I know that we need to write some kind of Adapter for this. So, can anyone help me in this. How to write this adapter. It will be really very helpful if I can get some sample program on how to write this kind of adapter.
Thanks,
-Naveen.

you check the docs and sample in DI/DS installation in the following folder
%LINK_DIR%\adapters\sdk
also, check if the 3rd party application provides support for webservices, if yes, instead of writing a adapter use that

Is there a way to use my company's fonts when designing using the cloud applications?

I recently subscribed to the cloud and quickly learned that my company's fonts are not available. Is there a way to use my company's fonts when designing in the cloud applications rather than using their fonts?

Which Adobe application(s) are you talking about?
As an example, if you're downloaded Adobe InDesign from the Creative Cloud, there is absolutely no difference in the way it uses fonts from a copy of Adobe InDesign that you installed from a DVD. Both applications are run from your computer's hard drive.
Your company's fonts would need to be installed on your computer to use them in any computer application.

When to use WEb Dynpro application and Portal application in NW dev studio

I would like to know what is the difference between
webdynpro application and EP Application using PDK.
Are they comaparable ...Which one has an edge over the other specific to any applications.
I want develop an application related to e-commerce using the SAP R3 as backend for an industiry(where in a registered user can place an order and query on the staus of order. All the data will be stored in R3 ).
I am planning to dev this using NW dev studio , but have an appehension about which application is useful for this kind of application either webdynpro or EP application .
can anybody explain which one has edge over the other ( Webdynpro or EP applcations in context with NW Dev studio) and why.
thanks
PK

Hi,
Webdynpro is used when requirements ask for a prototype using minimal time n effort.
Highly skilled programmers are not necessary to write a webdynpro application
It uses dynamic controls without reloading the page.
Portal components esp Abstract portal component provides a lean method to write HTML command to web client
Large interactive components requires more programming.
WebDynpro is a highly declarative, tool-based programming model. It minimizes platform-dependent "plumbing" code for building UIs and maximizes declarative metadata describing huge portions of a typical application in a platform-independent way.
Web Dynpro follows a "top-down" approach in order to consistently support multiple runtime platforms.
In Web Dynpro you just have to drag & drop the UI components.
Portal components has followed a "bottom-up", programming-driven approach to Web development.
Regards,
Pooja.

When to use the composite application framework...

Hi.
I am unsure where you would use CAF and where you would use normal webdynpro / portal components? What business scenarios lend itself for implimenting GP with callable dynpro /portal components more than normal webdynpro where the navigation is defined by "inbound/outbound" plugs.
A little confused.

The terminate step will hang up the CTI port (and release other resources within CRS). Use it only when you want the call to end.
If you are redirecting the call to another location (script or DN) use only the End step the release the resources for that application instance.

Third part application menu item hotkeys ????

Hi folks !
I would like to be able to access title and corresponding hotkeys (when existing) of every menuitems of a menubar, thanks to the accessibility API. I currently see how to retrieve the focus application and have access to its menubar, all I have now is to browse its elements.
Using the UIElementInspector, it seems like the accessibility API can help me to retrieve every menuitem of the menubar, and its corresponding title. However, I haven't been able to find a way to get corresponding hotkeys. While I thought the AXMenuItemCmdVirtualKey could help me, I haven't been able to find any application that has values associated to this field.
Does any one have an idea on how I should proceed to retrieve these hotkeys (if possible) ?
Thanks in advance for your help !
cheers

Try pressing the Command key and drag the icon off the menu bar at the same time.

Need help on how to permanently delete applications/programs without using third party applications

Title says it all...
Hope you guys can help me out.
Thanks!

See Here...
http://macmost.com/uninstalling-apps-in-mac-os-x-lion.html

When we use package's begin part?

Guys, I would like to learn when we use this part of package. I mean, because begin part only executes ones and never executes again in that session. So why we use this part?
create or replace
package body my_pack
is
num number;
str varchar2(50);
begin
So when should we use this part of packages?????
dbms_output.put_line(Why we use this part??????');
end;Thanks

>
So in the example above of a logging interface, if another package also use the same interface then it will overwrite the verbosity level of the initial package that was loaded. In such a case, each procedure in a package will need to first set the log level prior to using application logging.
>
That sounds like a design and implementation issue - not the way I implement logging. It doesn't make sense to have each package potentially overwrite the global log level like this. A package would either use the global log level already set or use it's own level.
The logging package would have an 'init' section that checks for a context variable to set the logging level and then either uses it or a default value if none is set. The log procedures would also be overloaded so that if no log level was specified as a parameter then the global value (set by the log package init section) would be used. The overloaded procedure would accept a log level parameter so that different levels could be used as needed.
The 'init' section in other packages would also check for a context variable (one for their package) and use it if it had been set. Otherwise they would get their log level from the value already set by the log package. If this 'other' package was the first to call the log package then they would get the value set by the log package 'init' as explained.

Third party application cannot see my itunes music. including iPhoto iMovie. any help?

i have music purchased from iTunes store and that have added my self, but when i go to iphoto and try a slideshow i try to choose music from my iTunes library the list is empty same with imovie, and other apps any help?

Right that is the point. I had a whole slew of eligible songs purchased from iTunes in my library that now are not available for purchase. For example I just purchased two songs that have the icon in the iTunes store. After I purchase them the icon in the "Bell" ringtone column is not showing for the songs that should be eligible. The only recent change I've made is this third part application. So I am thinking this has messed with my library somehow.

HT1391 third party application cannot see my itunes music. including iPhoto iMovie. any help?

i have music purchased from iTunes store and that have added my self, but when i go to iphoto and try a slideshow i try to choose music from my iTunes library the list is empty same with imovie, and other apps any help?

Right that is the point. I had a whole slew of eligible songs purchased from iTunes in my library that now are not available for purchase. For example I just purchased two songs that have the icon in the iTunes store. After I purchase them the icon in the "Bell" ringtone column is not showing for the songs that should be eligible. The only recent change I've made is this third part application. So I am thinking this has messed with my library somehow.

Third Party Application Called TuneUp Lost Ringtone Icons/Ability to Buy

Okay, I purchased and installed a third party application that is supposed to help iTunes get album art and other things. All was going well until i did their latest, greatest update and now I cannot see any Ringtones icons in the field that shows if ringtones are available in iTunes purchased songs. I still have my "purchased ringtones, but I don't have the ability to purchase anymore on songs that are eligible.
I've uninstalled TuneUp, reinstalled a fresh version of iTunes, but still not joy. How to I burn iTunes to the ground without losing my entire music library?

Right that is the point. I had a whole slew of eligible songs purchased from iTunes in my library that now are not available for purchase. For example I just purchased two songs that have the icon in the iTunes store. After I purchase them the icon in the "Bell" ringtone column is not showing for the songs that should be eligible. The only recent change I've made is this third part application. So I am thinking this has messed with my library somehow.

Troubleshooting when restarting using third parties application ?

Similar Messages

Maybe you are looking for