Troubleshooting Workflows ISSUE(endhost)
Hi All,
When I using end host center there is a problem.
I'm sure the ip is true and the last connected switch is managed.
Why would prompt this error?
Thank you
Hi,
there might be different reasons why the workflows are not loading from SPD.
You need to check ULS logs for more details or use Fiddler to trace if there is any issue.
http://blogs.technet.com/b/rajbugga/archive/2013/04/12/unable-to-load-workflow-actions-from-the-server-please-contact-your-server-administrator.aspx
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful
Similar Messages
-
Troubleshooting Approval workflow issues
We are getting this message from time to time and are unsure how to troubleshoot it.
It seems as though something is changing the document, what is the best way to figure out what?
Approval on DOCUMENT NAME has ended because the item that the task process is running on was changed.Hi Daniel,
1.What message do you get?
2. Look in the Workflow History list, eg "http://sp2013/Lists/Workflow History". Do you find any errors in there?
3. Is the user account starting the workflow correctly synchronized in the user profile database?
4. Is the user account starting the workflow different from the Worflow Manager setup account? (more info at
http://technet.microsoft.com/en-us/library/jj658588.aspx#section7)
5. Are the User Profile Service and App Management Service started? See the green frames in the screenshot below, taken from Central Administration \ Manage Services on Server.
6.Are the App Management Service Application and User Profile Service Application started? Their proxies should be started as well. See the green frames in the screenshot below, taken from
Central Administration \ Manage Services on Server.
For troubleshooting sharepoint workflow issues, you can have a look at the blog:
https://technet.microsoft.com/en-in/library/cc298927%28v=office.14%29.aspx?f=255&MSPPError=-2147217396
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
http://ranaictiu-technicalblog.blogspot.com/2013/03/sharepoint-2013-workflow-debugdiagnosis.html
https://infopathandsharepointdesigner.wordpress.com/2013/12/13/five-top-tips-for-troubleshooting-sharepoint-workflows/
http://blogs.technet.com/b/victorbutuza/archive/2009/02/26/how-to-enable-workflow-tracing-debug.aspxBest
Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
FAQ: How do I troubleshoot audio issues when importing .MTS files?
Hello. The link FAQ: How do I troubleshoot audio issues when importing .MTS files?
does not work, and i need the answer please. My imported MTS clips are not playing back audio because it seems that no audio imported with the video. Thanks, Don.Hi there
Audio plays when the object with the audio assigned appears. This is why you hear it when the Button appears.
Try assigning the audio instead to the object that appears when you click the button. Perhaps the caption.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Hi All,
A PO is created and rejected by a user in user decision step.The workflow will end.If the PO is changed(amount) again,the release strategy is triggered for the same user.But the workflow is not triggering.If the release strategy is for a different user,its triggering the workflow.I have used a fork inside which 1 parallel branch contains a wait for significantly changed event & another branch contains the user decision step,po release step & rejection reason scenario.
Please refer the thread below.
PO Release Strategy Issue
Replies will be greatly appreciated.
Edited by: Feddie on Jan 3, 2008 11:43 AMHi,
This is not workflow issue(work flow is different term)
It seem problem of BADI (program written for creation of purchase order based on sales order)
Take help of ABPer so he/she can solve this issue
Kapil -
Workflow issue in HR Process and Forms
Hi Experts,
I am new to HR process and Forms.
I am facing workflow issue in "change of position" process.
The process is not going from manager to HR admin.
Can anybody help me out on this.
Thanks in advance
Regards
RahulHi Sahir,
Thanks for your quick response.
I checked in swi1 but it is showing "no entry exists"
I have done all basic settings using PFTC and OOCU_RESP tcode but still it is not working.
is there any other customizing that is needful??
Regards
Rahul -
Workflow issue with interco transactions & general ledger entries in F-02
Hello Experts,
We are encountering a workflow issue when we are entering intercompany transactions with general ledger entries in F-02. Our workflow is set up with two release levels and the details are as follows:
Amount below $2500 - single release level
Amount above $2500 - two release levels
The document type that we are using is SU and it is configured with intercompany postings and trading partner enabled in the control data.
After parking a GL document that has interco amount entries below $2500 and general ledger amount entries above $2500 in F-02, the document is supposed to go to the two release levels in the workflow because the total amount is above $2500 (interco amount + general ledger amount > $2500). However, in the workflow, the document went to the single release level instead of the two release levels.
Any idea why the subledger amount takes precedent over the general ledger amounts in determining the workflow release level?
We would appreciate your help in solving this issue.You cannot change the design of the system.
SAP may consider the change of design if all the users across the industries are reported. If a single user has a special requirement, it cannot be changed.
You need to ask, whether this is a critical requirement for your business. Otherwise, please follow the standard way. -
I m having problems with both my iphone 3gs and 4 when my cellular data is on and my battery is fully charge but out of suddenn it will shut off can i know how can i troubleshoot this issue thanks
simply try doing a back up and restore
when going thru the activation screen, select SET UP AS NEW and then test your device. if it is not shutting down then it could be 1 or more apps tht have been downloaded wch could be affecting the device
you will then need to follow the process of eleimnation, meaning add 2 apps and then monitor your phone, if nothing happes then add another couple of them and then check
good luck !! -
Hi, does anyone knows what was happened to the following PDF notes in Cisco? The PDF file is only contains 1 page compared to the original notes in html format which is about a few pages.
If there is alternative link for this document, please let me know. Thanks.
Document ID: 22040
PIX/ASA: Monitor and Troubleshoot Performance Issues
http://www.cisco.com/image/gif/paws/22040/pixperformance.pdf <PDF Notes, but 1 page only?>
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008009491c.shtml < HTML Notes>Hi experts / marcin
can anyone of you let me know about my question related to vpn ?
Jayesh -
LR 3 Bug Report - file renaming error - significant workflow issue
System configuration:
MacPro Dual 2x2.66Ghz Dual Core Intel Xeon
9GB RAM
OSX 10.6.4
Lightroom Application on System Drive
Canon .CR2 files and Lightroom Catalog on internal software-based RAID drive
Camera Raw Cache set to 50GB and resident on System drive
Here is the issue:
Once I finish the first round of editing a group of photos, I then rename them with the title of the event and a sequence number. I use LR's batch rename feature in the Library module. If I then delete 1 or more of these photos and attempt to rename them again(same event title + numerical sequence), the new names do not properly apply the numerical sequence after the filename. Either of the following can happen, and whcih one will happen is not dependednt on what I do.
1. The files can be renamed, with the first image having a sequence number 1 number higher than the lowest number I typed into the sequence box in the batch rename dialog (if I type a number 1, the sequence starts at 2). There are also random gaps in the sequence numbering scheme. For example, the numbers will count to 15, then skip to 17, then count to 176, then skip to 178. The rest of the files might be renamed correctly, or there might be gaps. The gaps always skip a single number, and most of the time the numbers skipped are odd numbers, though numbers with a 16 are usually skipped (16, 116, 216)
2. The files can be renamed as mentioned above, but with the addition of a -1 to the end of the sequence (example: filename-200-1 or filename-3-1). The addition of the -1 is also random, though it is more common with lower-numbered files than higher-numbered files.
I have experienced this bug on groups as small as 50 photos or as large as several hundred. I have tried remaning the files to a completely different text/sequence combination and then back to the one I want, and it does not help the issue. The sequence numbering is more likely to have more gaps the more virtual copies are present in the series of photos being renamed.
This is a major workflow issue for me because the files I deliver have to be named sequentially, without gaps, following a specific text/numer naming convention. The bug is currently adding many extra hours to my post-production time. Any assitance would be greatly appreciated.
Thank youThanks for the detailed description. I was able to repro this with your steps and have logged a bug for futher investigation.
Becky -
Workflow issue after upgrade to ECC 6.0
Hi,
we are facing an workflow issue and thought if someone has faced similar issue and could help us.
We've an approval workflow for purchase requisitions through release strategies. For some steps, if the approver is 'WF-BATCH' user, we are executing that step using a program. This program first set the workitem to completed status( this part is working), then it will close the purchase requisition to release status for a particular release code( this part is working) and then we are triggering the 'RELEASE' event for the business object providing the Object key which should take it to the next step( THIS IS NOT WORKING). The business object is custom. This was working perfectly in 4.7 version of SAP but this logic is not working in ECC6.0. we are using SAP_WAPI_CREATE_EVENT to trigger the event. But the workflow doesn't move on to next step.
Have anyone of you have any idea as why this might be happening. Any information on this would be of great help.
This is happening in ECC 6.0. USED TO WORK IN EARLIER VERSION.
Regards,
Sam KHi,
Is WF-BATCH having proper auth. ?
Or, if you are using the FM SAP_WAPI_CREATE_EVENT in some program and is scheduled as a batch job, then that user under which this batch job is runnign should have proper auth. to raise the event. Please check those.
Also, what the error (if any) says in SWEL ?
venu -
Workflow issue-Agent not maintained
Hi All,
I have a workflow issue. For a PR, the workflow is throwing up the error as :
"Agent not maintained for plant XXXX planner group XXXX release code.
Please maintain an agent for the above key in the Agent AssignmentTable,and forward the workitem with text "Release requisition XYZ" in your Workflow inbox to an appropriate Approver."
Please help me out on this one.
Thanks,
Swati.HI
Check 'Agent Assignment' in not green..
Then push the button 'Agent.Assign for TASK' in front of 'Agent Assignment'.
Next, You can go the maintain screen.
Push 'F8' or 'Attributes...' and check 'General Task'.
and try again..
Good luck -
Does anyone know how I can troubleshoot my Portal Repository? I am having a cache problem, where whenever I make or edit anything in Portal I have to invalidate all the objects in web cache through web cache administration page before the changes will show up. It appears based on the stats that the web cache is caching too much and not invalidating them like it should. So I am thinking that maybe my Portal Repository is not notifying the web cache properly so that it knows when to invalidate an object. Does anyone know how can go about to check that this is working correctly or troubleshoot this issue? I greatly appreciate your help.
If the content is not being invalidated then most likely either there is a firewall blocking http communication between your database and your Web cache invalidation port, or you have configured the wrong invalidation port in the Portal repository.
You can see the Web cache invalidation port form the WC Admin UI, you can see what Portal thinks is the WC invalidation port in the EM UI on the Portal page. -
Content Workflow Issue using Cineform/PPro/AE
Hello, I have a potential workflow issue that I need some advice on. I'm currently editing a project in Premiere Pro CS3 using the Cineform intermediate codec (the video was shot in HDV--Canon HV30--imported using AspectHD). Everything is working fine.
However, I'd like to export some of the video of this project off to a portable hard drive to physically hand over to someone who will be importing it into After Effects CS3 (on a completely different hardware system) to spice things up for me--i.e. they are going to make a flashy intro/title for this project.
Lastly, I would like to re-import her finished video back into Premiere. She does not have the Cineform codec so exporting it as a cineform.avi file is out (I would think--or am I incorrect here?). My question is mainly--what is the best file format to hand over to my AE person AND what is the best file format for my AE person to give back to me to re-import into Premiere and keep it all in HD/HDV 16:9?
I have no idea if this is a really easy thing, or really challenging. Any thoughts or suggestions are greatly appreciated.
BillHi Bill
well the best person to answer that question is the lady who is doing the afterv fx work for you. only she knows what her system can handle. I would recommend first and foremost uncompressed avi if she is on windows or uncompressed .mov if she is on a mac. otherwise if she cannot handle uncompressed because the file is too big you could give her a quicktime animation. i think the file is a little smaller than uncompressed but i could be wrong. but qt animation is still a big file. you could also render out the video as an image sequence I recommend a TIFF sequence suing LZW compression to keep the file sizes down. give her the image sequence she can add the fx and then she can render out the final product as an image sequence again which you can match up with the audio track on your pc. she can also give you an uncompressed file which you can then render out to cineform.
angus -
Whenever I send a email from iPad mail app with an attachment from pages or numbers, the receiver is getting only attachment in the email. They are getting the email content. How to troubleshoot this issue.
Someone is probably sending spam with your address forged on the To: line. Could be one of your old contacts with a Windows machine has a virus that's doing it. It's also possible your e-mail account has been hacked, though I'd think such a hacker would be a bit more purposeful.
For more information, see:
http://www.reedcorner.net/guides/macvirus/is_it_malware.php#spam
* Disclaimer: links to my pages may give me compensation, and should not be taken as endorsement of my services by Apple. -
Hi All,
We have 2 x Nexus 7 cores and several access switches 3750 + 2960 and several VLANs.
All working well until recently we have a couple of users in VLAN say 200 reported they can not get an IP address from our Windows DHCP server.
ie hence they can not log to the Domain and we temporarly assign them a static IP addresses until we figure out what went wrong!!!
We checked the trunk , the DHCP server but can not see anything wrong
How do we troubleshooting this issues ?
Any advices are much appreciated
Thanks
PeterHi ,
Below are part of the Core Nexus 7 config:
ip dhcp relay
port-channel load-balance src-dst ip-l4port-vlan
vpc domain 70
peer-switch
role priority 10
peer-keepalive destination 172.18.111.251 source 172.18.111.250
peer-gateway
track 10
auto-recovery
ip arp synchronize
interface Vlan1
no ip redirects
no ipv6 redirects
interface Vlan100
no ip redirects
ip address 172.18.100.1/24
no ipv6 redirects
hsrp 0
authentication text hsrp100
preempt
priority 130
ip 172.18.100.3
description Servers
no shutdown
interface Vlan101
no ip redirects
ip address 172.18.101.1/24
no ipv6 redirects
hsrp 0
authentication text hsrp101
preempt
priority 130
ip 172.18.101.3
ip dhcp relay address 172.18.100.62
ip dhcp relay address 172.18.100.160
description Workstations Executive
no shutdown
interface Vlan102
no ip redirects
ip address 172.18.102.1/24
no ipv6 redirects
hsrp 0
authentication text hsrp102
preempt
priority 130
ip 172.18.102.3
ip dhcp relay address 172.18.100.62
ip dhcp relay address 172.18.100.160
description Workstations Security
no shutdown
interface Vlan200
no ip redirects
ip address 172.18.200.1/24
no ipv6 redirects
hsrp 0
authentication text hsrp103
preempt
priority 130
ip 172.18.200.3
ip dhcp relay address 172.18.100.62
ip dhcp relay address 172.18.100.174
ip dhcp relay address 172.18.100.160
description Workstations IS
no shutdown
interface Vlan105
no ip redirects
ip address 172.18.105.1/24
no ipv6 redirects
hsrp 0
authentication text hsrp105
preempt
priority 130
ip 172.18.105.3
ip dhcp relay address 172.18.100.62
description Workstations Food and Beverage
no shutdown
interface Vlan111
no ip redirects
ip address 172.18.111.1/24
no ipv6 redirects
hsrp 0
authentication text hsrp111
preempt
priority 130
ip 172.18.111.3
description Device Management
no shutdown
management
interface Vlan112
no ip redirects
ip address 172.18.112.1/23
no ipv6 redirects
hsrp 0
authentication text hsrp112
preempt
priority 130
ip 172.18.112.3
ip dhcp relay address 172.18.100.62
ip dhcp relay address 172.18.100.160
description Workstations General
no shutdown
And the config for the Access switch 3750 below:
Building configuration...
Current configuration : 17076 bytes
version 12.2
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname LOADINGDK
boot-start-marker
boot-end-marker
aaa new-model
aaa group server radius Radius
server 172.18.100.113 auth-port 1812 acct-port 1813
server 172.19.100.114 auth-port 1812 acct-port 1813
aaa authentication login default group Radius local
aaa authorization console
aaa authorization exec default group Radius local
aaa session-id common
clock timezone AEST 10
clock summer-time AEST recurring 1 Sun Oct 2:00 1 Sun Apr 2:00
switch 1 provision ws-c3750g-24ps
switch 2 provision ws-c3750-24ts
system mtu routing 1500
udld enable
ip subnet-zero
errdisable recovery cause bpduguard
errdisable recovery cause psecure-violation
spanning-tree mode rapid-pvst
spanning-tree loopguard default
spanning-tree portfast bpduguard default
no spanning-tree optimize bpdu transmission
spanning-tree extend system-id
vlan internal allocation policy ascending
lldp run
ip ssh version 2
class-map match-all avaya-voice-control-
match access-group name avaya-voice-control-
class-map match-all AutoQoS-VoIP-RTP-Trust
match ip dscp ef
class-map match-all AutoQoS-VoIP-Control-Trust
match ip dscp cs3 af31
class-map match-all avaya-voice-
match access-group name avaya-voice-
policy-map avaya-ip-phone-input-
class avaya-voice-
set dscp cs2
police 1000000 8000 exceed-action policed-dscp-transmit
class avaya-voice-control-
set dscp cs3
police 1000000 8000 exceed-action policed-dscp-transmit
class class-default
set dscp default
policy-map AutoQoS-Police-CiscoPhone
class AutoQoS-VoIP-RTP-Trust
set dscp ef
police 320000 8000 exceed-action policed-dscp-transmit
class AutoQoS-VoIP-Control-Trust
set dscp cs3
police 32000 8000 exceed-action policed-dscp-transmit
interface Port-channel1
switchport trunk encapsulation dot1q
switchport trunk native vlan 111
switchport trunk allowed vlan 102,105,111,112,116,117,142,160-162,184,200,302
switchport mode trunk
interface GigabitEthernet1/0/1
switchport access vlan 200
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/2
switchport access vlan 102
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/3
switchport access vlan 142
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/4
switchport access vlan 105
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/5
switchport access vlan 105
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/6
switchport access vlan 160
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/7
switchport access vlan 160
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/8
switchport access vlan 112
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/9
switchport access vlan 112
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/10
switchport access vlan 112
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/11
switchport access vlan 112
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/12
switchport access vlan 112
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/13
switchport access vlan 302
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/14
switchport access vlan 102
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/15
switchport access vlan 302
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/16
switchport access vlan 302
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/17
switchport access vlan 162
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/18
switchport access vlan 162
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/19
switchport access vlan 162
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/20
switchport access vlan 162
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/21
switchport access vlan 112
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/22
switchport access vlan 142
switchport mode access
switchport voice vlan 184
spanning-tree portfast
interface GigabitEthernet1/0/23
description device doesn't like poe
power inline never
switchport access vlan 117
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/24
switchport access vlan 116
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface GigabitEthernet1/0/25
switchport trunk encapsulation dot1q
switchport trunk native vlan 111
switchport trunk allowed vlan 105,111,112,116,117,142,160-162,184,200,302
switchport mode trunk
shutdown
speed nonegotiate
interface GigabitEthernet1/0/26
description - coresw2 uplink -
switchport trunk encapsulation dot1q
switchport trunk native vlan 111
switchport trunk allowed vlan 102,105,111,112,116,117,142,160-162,184,200,302
switchport mode trunk
channel-group 1 mode active
interface GigabitEthernet1/0/27
shutdown
interface GigabitEthernet1/0/28
shutdown
interface FastEthernet2/0/1
switchport access vlan 161
switchport mode access
spanning-tree portfast
interface FastEthernet2/0/2
switchport access vlan 161
switchport mode access
spanning-tree portfast
interface FastEthernet2/0/3
switchport access vlan 161
switchport mode access
spanning-tree portfast
interface FastEthernet2/0/4
switchport access vlan 161
switchport mode access
spanning-tree portfast
interface FastEthernet2/0/5
switchport access vlan 161
switchport mode access
spanning-tree portfast
interface FastEthernet2/0/6
switchport access vlan 161
switchport mode access
spanning-tree portfast
interface FastEthernet2/0/7
switchport access vlan 161
switchport mode access
spanning-tree portfast
interface FastEthernet2/0/8
switchport access vlan 161
switchport mode access
spanning-tree portfast
interface FastEthernet2/0/9
interface FastEthernet2/0/10
interface FastEthernet2/0/11
interface FastEthernet2/0/12
interface FastEthernet2/0/13
switchport access vlan 102
switchport mode access
switchport voice vlan 184
srr-queue bandwidth share 10 10 60 20
srr-queue bandwidth shape 10 0 0 0
priority-queue out
mls qos trust dscp
spanning-tree portfast
service-policy input avaya-ip-phone-input-
interface FastEthernet2/0/14
interface FastEthernet2/0/15
interface FastEthernet2/0/16
interface FastEthernet2/0/17
interface FastEthernet2/0/18
interface FastEthernet2/0/19
interface FastEthernet2/0/20
interface FastEthernet2/0/21
interface FastEthernet2/0/22
interface FastEthernet2/0/23
interface FastEthernet2/0/24
interface GigabitEthernet2/0/1
description - coresw1 uplink -
switchport trunk encapsulation dot1q
switchport trunk native vlan 111
switchport trunk allowed vlan 102,105,111,112,116,117,142,160-162,184,200,302
switchport mode trunk
channel-group 1 mode active
interface GigabitEthernet2/0/2
shutdown
interface Vlan1
no ip address
no ip route-cache
no ip mroute-cache
shutdown
interface Vlan111
ip address 172.18.111.13 255.255.255.0
no ip route-cache
no ip mroute-cache
ip default-gateway 172.18.111.3
ip classless
no ip http server
no ip http secure-server
ip access-list extended avaya-voice-control-
permit udp 172.18.184.0 0.0.3.255 range 2048 3329 172.18.184.0 0.0.3.255 range 2048 3329 dscp cs3
permit udp 172.18.184.0 0.0.3.255 range 2048 3329 172.19.184.0 0.0.0.255 range 2048 3329 dscp cs3
permit udp 172.18.184.0 0.0.3.255 range 2048 3329 172.17.43.0 0.0.0.255 range 2048 3329 dscp cs3
permit udp 172.18.184.0 0.0.3.255 range 2048 3329 172.18.181.0 0.0.0.255 range 2048 3329 dscp cs3
permit udp 172.18.184.0 0.0.3.255 range 2048 3329 172.19.181.0 0.0.0.255 range 2048 3329 dscp cs3
deny ip any any
ip access-list extended avaya-voice-
permit udp 172.18.184.0 0.0.3.255 range 2048 3329 172.18.184.0 0.0.3.255 range 2048 3329 dscp ef
permit udp 172.18.184.0 0.0.3.255 range 2048 3329 172.19.184.0 0.0.0.255 range 2048 3329 dscp ef
permit udp 172.18.184.0 0.0.3.255 range 2048 3329 172.17.43.0 0.0.0.255 range 2048 3329 dscp ef
permit udp 172.18.184.0 0.0.3.255 range 2048 3329 172.18.181.0 0.0.0.255 range 2048 3329 dscp ef
permit udp 172.18.184.0 0.0.3.255 range 2048 3329 172.19.181.0 0.0.0.255 range 2048 3329 dscp ef
deny ip any any
ip radius source-interface Vlan111
logging history informational
logging trap notifications
logging facility syslog
logging 172.18.100.103
logging 172.18.100.191
snmp-server location C3.01
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps cluster
snmp-server enable traps entity
snmp-server enable traps vtp
snmp-server enable traps vlancreate
snmp-server enable traps vlandelete
snmp-server enable traps flash insertion removal
snmp-server enable traps port-security
snmp-server enable traps envmon fan shutdown supply temperature status
snmp-server enable traps license
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps hsrp
snmp-server enable traps bridge newroot topologychange
snmp-server enable traps stpx inconsistency root-inconsistency loop-inconsistency
snmp-server enable traps syslog
snmp-server enable traps vlan-membership
snmp-server host 172.18.100.191 ..traps..
control-plane
banner login ^CCCCCC
Authorized access only! Disconnect IMMEDIATELY if you are not an authorized user! ^C
ntp clock-period 36029332
ntp server 172.18.111.2
ntp server 172.18.111.1
end
Thanks
Peter
Maybe you are looking for
-
Tree Table is not getting refreshed properly in Jdev 11.1.2.0
Hi, I am seeing a peculiar issue with tree table not getting refreshed in Jdev 11.1.2.0. Let me explain you my use case. I have a tree table in a page, where the first column is displayed as selectBooleanRadio component. When user selects this select
-
Hi all, I am new to using flex Im working on a application where the front end makes a post request to the servlet. I don't know how to set the URL in the httpservice call. In a web java project in which front end was a basic html page with a form to
-
I need to extract the number, if it exists, from an alphanumeric text string. I am told that the first two characters will be alpha and the remaining character(s) will be numeric, if the numeric exists at all. I know this is a simple formula, but I
-
Hi, May I know selling expenses is considered part of overhead cost? selling expenses can only be considered part of cogs and not in cogm when determine selling price, also have to take into account selling expenses cost like freight/transportation?
-
Dowloading a backup copy of elements 12
I read that in addition to my main downloaded copy of Elements 12, I can download a backup copy of the program to a DVD. How do I do that?