Truecrypt-6.0a to 6.1 - error: "No entry for device-mapper found."

/proc/misc: No entry for device-mapper found
Is device-mapper driver missing from kernel?
Failure to communicate with kernel device-mapper driver.
Command failed
that's the full error I get when trying to mount my encrypted drive - I'm sure there is a simple fix for this but no one else seems to have the same issue, I compiled from the source but still got the same error.

lilsirecho wrote:Try...... modprobe dm-mod................
I have it built into my kernel.

Similar Messages

MB01 is giving error:No entry for partner function '' in table TPAR

MB01 is giving below error when i am trying to trigger ALE idocs using output type 'ZWE2'
Error:'No entry for partner function '' in table TPAR'.
I am unable to find what could be the above error and how to rectify.
Any help in this regard would be appreciated.
Thanks!

There is a partner function code for which there is no configuration data in TPAR. What is the partner function? Can you find that and verify that it is correct, or correct it to a value that is configured in TPAR?

Makechroot trouble - GPGME error: Inappropriate ioctl for device

Hi everybody!
I'm currently trying out several DEs with Arch and would like to build Trinity, R14, too. I followed the wiki (which more or less points to this readme).
Things are a bit tricky there, but I ended up with having the tar.gz archives built and moved to the right location as well as placing all the other stuff into the dirs made for it.
Step 4 set up a new chroot for me and everything was well except for a warning that there was no local.db. Since the scripts don't seem to build 'hal-info', 'hal' and 'libutempter', I build packages for them by hand and moved those into $chroot/root/repo. Then I used repo-add local.db.tar.gz $pkgname for each package.
Finally I updated the chroot using mkarchroot -u $chroot/root". It worked well and now I do have a file 'local.db'.
But if I want to build the first package ('tqt3') using the 'bt.sh' script, it works up to the moment where it issues 'sudo makechrootpkg -r /home/myusername/chroot -u'. Pacman starts downloading the dependencies before building, but once it's done with "checking package integrity", I just get several lines of
error: GPGME error: Inappropriate ioctl for device
and than a bunch of lines talling me that $pkgname is "missing required signature".
I'm rather new to Arch and despite having searched the wiki, the forums and google for a while, I'm not really going anywhere. I understand that it's pacman which is unable to cope with the signature thing in the chroot. But what to do about this?

Thanks for your answer, cmb!
My problem was solved in an unexpected way, though: Just a few days after I had given up on getting building the Trinity DE myself, someone set up a custom repo for it that was added to the wiki. This was of course by far the easiest solution. But it was also good to mess a little with the build system myself.

ESS Benefits error - No entry for period parameter 04/payroll year/payroll

Hi,
When I click on Annual Enrollment link under ESS Benefits section, I get an Error from Standard WebDynro Application - No entry for period parameter 04/payroll year/payroll period. What config could be missing in the R/3 ?
Any suggestions?
Cheers,
Murali.

Hi,
Employee assigned Payroll area (refere to IT0001- Org Assignment) not moved into prd Payperiods. And as per you Payroll area assigned to "00", Ask your payroll consultant assign payroll area period parameters and generate periods through T.code "OG00"
Issue is with T549Q..

Up: error fetching interface information: device not found

Hiya,
FIrst off... apologies that I've already made a thread on this - but I still haven't found a fix
I'm thinking I might have more luck in the Networking section
Here's my original post: https://bbs.archlinux.org/viewtopic.php?pid=827958
I appreciate it

Maybe U need change MAC address of your network card.
ifconfig eth0 hw ether 00:00:00:00:00:01 .
Where the 00:00:00:00:00:01 is the MAC of your desktop with windows.

Error in IW42 for service

I have a issue when i am trying to confirm the services for Maintenance order from TC IW42. It is showing an error
Service entry for operation 0010 not possible
Message no. CMFU078
Diagnosis
You have tried to call up the dialog box for service entry for operation 0010.
System Response
The control key for operation 0010 does not allow service entry.
Procedure
Select an operation or sub-operation, for which service entry is allowed.
You select an operation or sub-operation in the table for the time completion confirmation using the Data for the operation pushbutton.
Please help to resolve the erorr.
Regrds

Hi rakesh
What is the control key u have used...
PM01, PM02 , PM03 or PM05
PM01 - only for internal labour work
PM02 - Internal Service
PM03 - External Service
Out of this... u will be entering service entry sheet only for PM03... this is the standard config done by SAP
Check it out...
If these are ok... check it out with SAP Notes..
- Pithan

Unknown Error Message "No entry for plan VOL/coverage 0002/key/11//"

Hello,
We are doing some cleanup work on our Voluntary Life plan. We have a handful of employees who need to be marked as "Deductions Pre-tax." When I select this checkbox on the costs tab of this insurance plan, I receive as error "No entry for plan VOL/coverage 0002/key/11//." We don't get this error for everybody, it seems to be only for people who have a start date on this plan of 2002 or earlier. We did upgrade from 4.6c to ecc 5.0 back in 2006, but otherwise there really hasn't been any updates to the configuration of this plan. Can anybody guide me in the right direction to resolve this? This is Message no. HRBEN00TABLEREADS407. Thanks

Hello,
I would advise you to run a consistency check for insurance plan, cost and coverage rules. Please follow the path in IMG
Personnel Management > Benefits > Toolset > Configuration Consistency Check
Hope it helps,
Christine

Cannot mount Truecrypt volume (device-mapper error)

I have a 1TB external USB disk (externally powered) and I have created 3 partitions on it:
Disk /dev/sdb: 1000.2 GB, 1000202043392 bytes
255 heads, 63 sectors/track, 121600 cylinders, total 1953519616 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 2048 696322047 348160000 7 HPFS/NTFS
/dev/sdb2 1683384320 1744824319 30720000 83 Linux
/dev/sdb3 1744824320 1953517567 104346624 7 HPFS/NTFS
The last partition, /dev/sdb3, has been formatted with Truecrypt 7.0a and I'd like to mount it, but truecrypt reports the following error:
device-mapper: reload ioctl failed: No such file or directory
Command failed
I am getting the same error with my custom kernel and with stock Arch Linux kernel; what can it be? Can somebody please help me to narrow down this issue?
Thanks

Ehm..I am trying to mount the device (/dev/sdb3), not the mapper! Although I can see that with file-based truecrypt container the mapper gets mounted. Shan't truecrypt create the mapper and mount that for me in case I select a device?
This is the information of the two mappings created (2_0 and 2_1 since I had already mounted a file-based container):
Name: truecrypt2_0
State: ACTIVE
Read Ahead: 256
Tables present: LIVE
Open count: 0
Event number: 0
Major, minor: 254, 2
Number of targets: 1
Name: truecrypt2_1
State: ACTIVE
Read Ahead: 256
Tables present: LIVE
Open count: 1
Event number: 0
Major, minor: 254, 1
Number of targets: 1
None of them gets mounted after I get the mentioned error; maybe truecrypt is expecting a dm feature which I have not enabled in my kernel?

LUKS/dmcrypt device-mapper error

Hi,
Ok this is a strange one because I have several encrypted volumes already in use working fine, yet im having problems creating a new LUKS container with cryptsetup on a new USB hard drive.
Just using standard AES in XTS mode, and all the required kernel modules (dmcrypt/aes) are loaded.
[root@tcore media]# cryptsetup -c aes-xts-plain -y -s 512 luksFormat /dev/sdf1
WARNING!
========
This will overwrite data on /dev/sdf1 irrevocably.
Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase:
Verify passphrase:
device-mapper: reload ioctl failed: Invalid argument
Failed to setup dm-crypt key mapping for device /dev/sdf1.
Check that kernel supports aes-xts-plain cipher (check syslog for more info).
This is /dev/sdf:
Disk /dev/sdf: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdf1 63 488392064 244196001 83 Linux
Any ideas? As my kernel clearly does support the cipher. Possibly a USB issue as all my other volumes are on internal SATA drives?
EDIT: on some attempts the error varies and also shows: device-mapper: remove ioctl failed: Device or resource busy
Last edited by tntcoda (2010-09-30 12:31:00)

Ehm..I am trying to mount the device (/dev/sdb3), not the mapper! Although I can see that with file-based truecrypt container the mapper gets mounted. Shan't truecrypt create the mapper and mount that for me in case I select a device?
This is the information of the two mappings created (2_0 and 2_1 since I had already mounted a file-based container):
Name: truecrypt2_0
State: ACTIVE
Read Ahead: 256
Tables present: LIVE
Open count: 0
Event number: 0
Major, minor: 254, 2
Number of targets: 1
Name: truecrypt2_1
State: ACTIVE
Read Ahead: 256
Tables present: LIVE
Open count: 1
Event number: 0
Major, minor: 254, 1
Number of targets: 1
None of them gets mounted after I get the mentioned error; maybe truecrypt is expecting a dm feature which I have not enabled in my kernel?

Error message saying a device attached to the system is not functioning

i m getting an error message saying a device attached to the system is not functioning whenever i m trying to connect my pc to my smartphone. i tried all your options like uninstalling failed updates from my update history, checking if their is any flag
in device manager option but nothing helped me.. plz solve my problem..

Hi,
Could you please have a share with your phone's information?
Based on what I know, different phones may have different softwares developed by the manufacturer to make the connection through Windows operating system, we may check with the phone's manufacturer side and see if there could be some helpful information
offered.
Besides, please take a check with
Event Viewer and see if any special errors logged there.
Best regards
Michael Shao
TechNet Community Support

Error " Data missing for the entry check while creating a new waste code

Hi all, While setting a new Waste code I get the error " Data missing for the entry check, correction:". while filling the NAM- WASTECOCAT - LER item.
This sould look for the catalog's name included in the phrase set but for some reason it doesn't find it giving me this error.
I am changing original Characteristics, phrase set, classes, and value assignment type. Just to have my own estructure with Znames for all of them.
I have also change the enviroment parameter "WAM_PHRSET_WACATLG" with the name of my phrase set.
I have checked everything several times watching for typos or looking for a missing step.
I have even tried including my new Z's characteristics in the classe and living the original SAP_EHS_1024_001_WASTE_CATALOG. (changing the enviroment parameter WAM_PHRSET_WACATLG to SAP_EHS_1024_001_WASTE_CATALOG) and it works.
I will like to change this characteristic by Z_EHS_WA_WASTE_CATALOG
Phrase set to Z_EHS_WA_WASTE_CATALOG.
enviroment parameter WAM_PHRSET_WACATLG= Z_EHS_WA_WASTE_CATALOG
After matching up the master data It should work fine but I might be missing something to get it running ok.
¿Any idea?
Regards,
Alvaro

Hello Juan Carlos, the value and class that I want to duplicate and doesn't work is for Waste Code, I have also duplicated the one you have displayed (waste pproperties) without any problem.
1.I have duplicated and changed class SAP_EHS_1024_001. to Z_EHS_WA
2. Create a copy of the 5 characteristics included in this class.
SAP_EHS_1024_001_WASTE_CATALOG
SAP_EHS_1024_001_WASTE_CODE
SAP_EHS_1024_001_WA_SUBCATEG
SAP_EHS_1024_001_WA_CATEGORY
SAP_EHS_1024_001_REMARK
change the name by
Z_EHS_WA_WASTE_CATALOG
Z_EHS_WA_WASTE_CODE
Z_EHS_WA_SUBCATEG
Z_EHS_WA_CATEGORY
Z_EHS_WA_REMARK.
I checked the funcion C14K_WASTECATLG_CHECK is in the value of the Z_EHS_WA_WASTE_CODE characteristic
I checked the funcion C14K_WASTECODE_CHECK is in the value of the Z_EHS_WA_WASTE_CATALOG characteristic
3. Create phrase sets for each new category. with same name.
4. Match up the master data.
5. Change the enviroment parameter.to Z_EHS_WA_WASTE_CATALOG
I think I have followed all the steps, but for some reason it doesn't find the catalog
The phrase for the catalog is EWC in english and LER in spanish.
Regards
Alvaro.

My iphone 3GS no longer syncs with iTunes. The phone is recognised, backs up but then I get an error message: "Waiting for changes to be applied". BUT unlike other people, it doesn't stay stuck on it, instead the process closes down immediately

Hi all,
Apologies: I've just joined the community and didn't quite figure how to write a msg! Hope it works...
Anyway,
I read many posts on this annoying error message (Waiting for changes to be applied) in the last 2/3 days, but they all refer to the sync staying stuck on it.
Mine doesn't.
I read the message, then it quickly shuts down the sync and the iTunes progress bar only shows the apple...
As suggested by many, I removed voice msgs, turned off/on, tried to sync in individual stages (calendar only...) but nothing works.
I am up to date on iTunes (11.1.1.11) and have IOS 6.1.3 on my phone, to sync on a Win8 pc (all worked fine until recently).
I have had this phone for several years and it has never done this.
It worked absolutely fine, until I loaded the latest version of iTunes it seems...
Any suggestions?
Many thanks

ALSO, on the iPod under Settings>General>iTunes Sync, you may need to back out of the "iTunes Wi-fi Sync," and reopen it to get it to update.
(I use iTunes 11.1.5.5)

RFC Connection error in SM59 for SAP J2EE

Hi All,
i am getting the following error description while testing the connection for
SAP J2EE ...
Connection Test SAPJ2EE
Connection Type TCP/IP Connection
Logon              Connection Error
Error Details     Error when opening an RFC connection
Error Details     ERROR: program sapfallback not registered
Error Details     LOCATION: SAP-Gateway on host filip / sapgw00
Error Details     DETAIL: TP sapfallback not registered
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 1483
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 1694
Error Details     RETURN CODE: 679
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Tue Mar 31 02:44:35 2009
Error Details     VERSION: 2
Help me resolve this
Regards,
Mahesh.

Hi,
Please follow this steps:
Creating RFC Destinations in the ABAP and Java Environment
You need to create the following RFC destinations in transaction SM59 (ABAP) and the Visual Administrator (Java):
u2022 AI_RUNTIME_JCOSERVER
u2022 AI_DIRECTORY_JCOSERVER
u2022 LCRSAPRFC
u2022 SAPSLDAPI
Depending on your client settings, it may be necessary to be logged on your SAP Exchange Infrastructure host as SAP system user with the authorization to maintain customizing tables and to release transport orders. Note, that user "SAP*" or "DDIC" does not have these authorizations.
Maintaining the RFC Connections (Transaction SM59)
1. Log on to your SAP Exchange Infrastructure central instance host.
2. Call transaction SM59.
3. Choose Create.
4. Enter at least the following:
RFC destination: AI_RUNTIME_JCOSERVER
Connection type: T
Description: <your description>
5. Choose ENTER
6. Choose the tab Technical settings and do the following:
a. Select Registered Server Program
b. In the Program ID field, enter: AI_RUNTIME_<SID> where <SID> is the SAP system ID of your Integration Server host. Use uppercase letters only.
c. Enter Gateway host and Gateway service of your Integration Server host. To find out the required parameters:
a. On the Integration Server host, call transaction SMGW
b. Choose Goto u2192 Parameters u2192 Display (see entries for gateway hostname and gateway service)
7. Choose tab Special Options and select the flag Unicode in the box Character Width in Target System.
8. Save your settings.
9. Repeat the steps 3 u2013 8 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
Program ID: AI_DIRECTORY_<SID>, where <SID> is the SAP system ID of your SAP XI host
LCRSAPRFC
Program ID: LCRSAPRFC_<SID>, where <SID> is the SAP system ID of your SAP XI host.
SAPSLDAPI
Program ID: SAPSLDAPI_<SID>, where <SID> is the SAP system ID of your SAP XI host.
10. Leave the transaction SM59 open for later tests.
J2EE Configuration for the Destinations (Visual Administrator)
1. On your SAP Exchange Infrastructure central instance host, start the J2EE Engine administration tool.
2. Choose Cluster u2192 Server u2192 Services u2192 JCo RFC Provider
3. In the section RFC destination, enter exactly the same program ID and gateway options for AI_RUNTIME_JCOSERVER that you used in the step Maintaining the RFC connection above. Additionally, set the number of processes to 10.
4. In the section Repository, do the following:
a. Enter the parameter for the SAP XI host: Application Server, System Number, Client and Language.
b. For User and Password maintain the login parameters for the user SAPJSF.
c. Select the flag Unicode.
6. Choose Set.
7. Repeat the steps 3 u2013 6 for the remaining destinations:
Destination
Values
AI_DIRECTORY_JCOSERVER
u2022 Corresponding values from SM59
u2022 Number of processes: 10
LCRSAPRFC
u2022 Corresponding values from SM59
u2022 Number of processes: 3
SAPSLDAPI
u2022 Corresponding values from SM59
u2022 Number of processes: 3
Testing the RFC Destination
After you have maintained all RFC destinations in both the ABAP and Java environment, you can check all the connections above as follows:
1. Call transaction SM59 again.
2. Open your RFC destination.
3. Choose Test Connection. No error should be displayed.
This will solve your problem.
Thanks
Laxmi Bhushan

Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

I started getting start-up problems with my hp pavilion dv6t-7000‏. It happens intermittently.
The boot error is:
Boot Device Not Found
   Please install an operating system on your hard disk.
   Hard Disk (3F0)
   F2 System Diagnostics
   For more information, please visit: www.hp.com/go/techcenter/startup
Could a faulty BIOS update cause this problem?
Anyone else who may have experienced a similar problem?
I'd appreciate any help about this problem. Thanks.

Hi
Please find the link given below might help you to fix your issue.
Resolve Boot Device not Found Error Message
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Problem with Home Sharing. Getting the error "The Requested URL was not Found on this Server"

I recently purchased an iPhone 5. As I do with all of my AppleTVs, iPads, iPods and an iPhone 4 in my home, I connected the 5 to my home network and accessed the shared video library using home sharing. My iTunes library is roughly 85% iTunes purchases, a handful of videos taken with iOS devices, and some video ripped with Handbrake. All of these videos work fine on all devices in my home except my new iPhone 5. When I access the shared video library on my iPhone 5, all of the textual data for all of the videos appears, however, I can only get the iPhone to play 1 video of the dozens in my iTunes library. When I try to play any other, I get the error, "The Requested URL was not Found on this Server."
Interestingly, only one video in my entire shared library displays the artwork associated with it in my iTunes library on my iPhone 5, and that's the one I can stream without a problem. Even more interestingly, that video I am able to stream was ripped using Handbrake (there are a number in my library ripped using Handbrake, but just this one will stream to my iPhone 5 for some reason).
I'm using the latest version of iTunes (10.7) on my home (iMac) computer (running OSX 10.8.2- Mountain Lion)and of course iOS 6 on the iPhone 5. I've tried resetting my iPhone several times as well as restarting my iMac which holds my iTunes library.
Does anyone have any ideas as to what's going on?

Can you see if you can view index page from a browser on iPhone.
Have you seen live streams working from a different computer...
if not then check if a proper crossdomain.xml file in its place(webroot folder).

Truecrypt-6.0a to 6.1 - error: "No entry for device-mapper found."

Similar Messages

Maybe you are looking for