Truecrypt is now in the [extra] repo

I've just added truecrypt to [extra],so you should be able to get it from your usual mirror within the next 24 hours or so. You will need truecrypt-utils for the userspace tools, and either truecrypt or truecrypt-beyond for the module, depending which kernel you use.

truecrypt currently does not compile against kernel 2.6.20, and the truecrypt devs have not yet released an official fix. There are some patches available that have been submitted by truecrypt users, who may or may not know what they are doing, but as we're talking about encryption here, I expect that most users will be happy to wait for the official fix.
Notwithstanding the above - ai, I'm delighted you use testing, and I have no doubt that you are aware of the implications of doing so. I will build a 2.6.20 version for you using the best-looking patch I can find, and you can let me know how (or if) it works. All this will, of course, be at your own risk, if you decide to do it.
Last edited by tomk (2007-02-09 23:07:26)

Similar Messages

SOLVED-My maintained package is now in the community repo, now what?:)

Hi,
I am the maintainer of the package ibus-unikey in the AUR, but now it's moved into the community repo, how can I still maintain this package?
Many thanks.
Tinh
Last edited by tinhtruong (2010-12-28 09:44:42)

Essentially you don't maintain it any more. A Trusted User will maintain it in the [community] repo (and should have emailed to let you know...).

Can't get Eclipse from extra repo to work

Hi
After a long time I have to code an app in Java, so I want to install Eclipse because I know my way around that IDE. I found it in the extra repo, but when trying to run it I get an error
An error has occurred. See the log file ~/workspace/.metadata/.log.
The mentioned file has has the following in it:
!SESSION 2010-01-06 13:37:21.459 -----------------------------------------------
eclipse.buildId=M20090917-0800
java.version=1.6.0_0
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=linux, ARCH=x86, WS=gtk, NL=en_GB
Command-line arguments: -os linux -ws gtk -arch x86
!ENTRY org.eclipse.osgi 4 0 2010-01-06 13:37:22.375
!MESSAGE Application error
!STACK 1
java.lang.UnsatisfiedLinkError: no swt-gtk-3555 or swt-gtk in swt.library.path, java.library.path or the jar file
at org.eclipse.swt.internal.Library.loadLibrary(Library.java:254)
at org.eclipse.swt.internal.Library.loadLibrary(Library.java:159)
at org.eclipse.swt.internal.C.<clinit>(C.java:21)
at org.eclipse.swt.internal.Converter.wcsToMbcs(Converter.java:63)
at org.eclipse.swt.internal.Converter.wcsToMbcs(Converter.java:54)
at org.eclipse.swt.widgets.Display.<clinit>(Display.java:131)
at org.eclipse.ui.internal.Workbench.createDisplay(Workbench.java:516)
at org.eclipse.ui.PlatformUI.createDisplay(PlatformUI.java:161)
at org.eclipse.ui.internal.ide.application.IDEApplication.createDisplay(IDEApplication.java:143)
at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:88)
at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)
at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:616)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514)
at org.eclipse.equinox.launcher.Main.run(Main.java:1311)
Can anyone make sense out of this? It looks as if the swt library is missing but that isn't a dependency of eclipse. I tried to install the swt package from the repo but that doesn't help. I also get the same error with jre+jdk and openjdk6.
EDIT: I also tried deleting ~/.eclipse and starting with a clean workspace directory, didn't help.
Last edited by Ramses de Norre (2010-01-06 12:40:31)

That's a good idea. I've looked at this post every time it comes up (obviously don't know the problem, and neither does anyone else I think).

Having corrected my corrupt catalog (PSE 11) I now have thousands of duplicate images. Is there any way of of removing the extra copies? I've had suggestions that apply to Windows, and iPhoto but can't find any advice for Photoshop Elements on Mac Maveric

Having corrected my corrupt catalog (PSE 11) I now have thousands of duplicate images. Is there any way of of removing the extra copies? I've had suggestions that apply to Windows, and iPhoto but can't find any advice for Photoshop Elements on Mac Maverick

You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse

I bought a HD and the Itunes Stores say that the movie (Pretty Women) has Itunes Extras. Why I can not find it? It is a mistake from Apple? What happen if I buy the movie because the Extras and now I can not watch it? I have an Ipad last generation.

I bought a HD and the Itunes Stores say that the movie (Pretty Women) has Itunes Extras. Why I can not find it? It is a mistake from Apple? What happen if I buy the movie because the Extras and now I can not watch it? I have an Ipad last generation.

What version of iOS do you have on your iPad (Settings > General > About > Version), and is it connected to wifi ?
From Buy and play movies with iTunes Extras - Apple Support :
Here’s what you need to stream the new iTunes Extras:
Mac using OS X Mavericks v10.9.3 or later and iTunes 11.3 or later
PC using iTunes 11.3 or later
Apple TV (2nd and 3rd generation or later) using Apple TV software 6.2 or later
iPhone, iPad, or iPod touch using iOS 8 or later (You need to connect to Wi-Fi. Extras won't appear if you're connected to a cellular network.)
An active Internet connection
You can use the steps below on your Apple TV, Mac, PC, or iOS device for any purchased, HD movie that features Extras:
On your Apple TV, select Movies, then select your movie to see the Extras menu. Extras aren't available from the Computer tile on Apple TV (Home Sharing).
On your Mac or PC, open iTunes and go to the Movies section in your iTunes library. Double-click your movie. If there's no Internet connection, the Extras menu will be skipped. The movie will immediately play if you already downloaded it.
On your iPhone, iPad, or iPod touch, tap the Videos app, then tap your movie. If you're connected to the Internet via Wi-Fi, the Extras menu will appear.

[svn:fx-trunk] 10459: Change to ensure ScriptNodes are no longer part of the node tree after interface compilation stage in order to avoid the extra code that was necessary to avoid tripping over them during type checking , etc.

Revision: 10459
Author:   [email protected]
Date:     2009-09-21 08:42:44 -0700 (Mon, 21 Sep 2009)
Log Message:
Change to ensure ScriptNodes are no longer part of the node tree after interface compilation stage in order to avoid the extra code that was necessary to avoid tripping over them during type checking, etc.
Improving revision 10199 a bit, to allow for single line comments.
QE notes: None
Doc notes: None
Bugs: SDK-22027
Reviewer: Paul
Tests run: Checking, Compiler cyclones
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-22027
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/AbstractSyntaxTreeUtil.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/AbstractBuilder.java
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/DocumentBuilder.java

In general theory, one now has the Edit button for their posts, until someone/anyone Replies to it. I've had Edit available for weeks, as opposed to the old forum's ~ 30 mins.
That, however, is in theory. I've posted, and immediately seen something that needed editing, only to find NO Replies, yet the Edit button is no longer available, only seconds later. Still, in that same thread, I'd have the Edit button from older posts, to which there had also been no Replies even after several days/weeks. Found one that had to be over a month old, and Edit was still there.
Do not know the why/how of this behavior. At first, I thought that maybe there WAS a Reply, that "ate" my Edit button, but had not Refreshed on my screen. Refresh still showed no Replies, just no Edit either. In those cases, I just Reply and mention the [Edit].
Also, it seems that the buttons get very scrambled at times, and Refresh does not always clear that up. I end up clicking where I "think" the right button should be and hope for the best. Seems that when the buttons do bunch up they can appear at random around the page, often three atop one another, and maybe one way the heck out in left-field.
While I'm on a role, it would be nice to be able to switch between Flattened and Threaded Views on the fly. Each has a use, and having to go to Options and then come back down to the thread is a very slow process. Jive is probably incapable of this, but I can dream.
Hunt

What are the extra 13 paritions? root user security concerns?

I [was] running Yosemite 10.10.3 on a Late 2014 iMac Fusion Drive SSD and HDD
This might be a bit confusing, and I need assistance from someone who really knows what they're talking about here.
When messing around trying to secure my system, I enabled the root user to view certain files, and accidentally did not disable it when I was finished. After this, I unknowingly ran my computer for probably a month as the administrator with the root user enabled, and made number of downloads in the process (which used the same password as root). After recently realizing this, I noticed in my activity monitor that some of my downloaded application were running as root user, not as administrator, as I thought they should be, and I also found malware after running ClamXav.
Because of all this and my compromised root, I wanted to ensure there was no third party code was deeply embedded in my drive, so I backed my important data, and actually proceeded to (very carefully) separate my fusion drive using 'diskutil' commands, wiping and reformatting everything but the base system. Then, I booted into safe mode to check the "diskutil cs list" and "diskutil list" through the terminal, and was surprised to still find 17 partitions in total, including those in my Logical Volume Group. Command "diskutil cs list" reveals partitions /dev/disk0 as my SSD, /dev/disk1 as my HDD with .efi and recovery, and /dev/disk2 as the apple base system, and ALSO /dev/disk3 as my HDD again (which is an unusual addition to what I have seen as typical LVG diskutil cs list outputs, though I assume it is just be related to booting from recovery mode with no OS on my disk any longer)
Command "diskutil list" reveals these disks (/dev/disk0-3), along with small partitions, dev/disk4, /dev/disk5....all the way up to /dev/disk16. All these unknown disk partitions 4-16 range from 0-4mb in size. One of my main questions is simply what all of these extra partitions are.... are they just required hidden partitions only visible through the recovery mode boot?
Even if so, is there a possibility that my actions explained in the first paragraph have compromised the integrity of ANY of the disks on my drive(s)? I do not want any installs to have access to my root, or to have embedded anything into my core system, regardless of whether they are malicious or not. I did not do a full zero secure wipe, as I figured that would be overkill and wear on my drives, but am also curious if it is even possible that the base system or other core components could have been injected with any 3rd part code. I know I may seem overly paranoid but I want to ensure that my system does not have any security holes from the start, before I go about re-installing all my software again, some of which opens up security holes, but I am required to have it for my work.
I want to note that I have already downloaded a new OS through internet recovery mode onto my reconfigured fusion drive, and do not see these extra partitions when I am logged in as a user, however they still appear in recovery mode, re-affirming my assumption that they are simply hidden partitions only seen through the recovery boot menu. I still have not loaded any of my data however, and regardless of whether or not the extra /dev/disk partitions I noticed are simply hidden apple boot partitions, any advice on whether I should zero-pass wipe any drives and reinstall the OS again to absolutely ensure there are not security holes after having my root user compromised would be greatly appreciated. I could even resort to a full dban and use a snow leapord install disc I still have, but do not want to put extra wear on my drive it there is no chance these core drives were compromised. Sorry for not posting a picture of my terminal output as well; I was unable to setup an ssh connection to do a screen shot from the recovery partition. And thank you ahead of time to anyone who takes the time to read this and give me any advice.

These are photo screen shots with the UUID's covered, showing the output of "diskutil cs list" and "diskutil list".
I need to note that I have since re-separated the fusion drive in and then did a secure erase 1 pass of zeros over the HDD thinking that would solve the problem after realizing that these were not apple boot components, but I checked the output of "diskutil cs list" and "diskutil list" again and they were all embedded in there just as before. In response to someone elses comments I have made multiple encrypted .dmg files, but I thought I have only made around 4 or 5 EVER, not all these other ones, and was unaware that they stay embedded in your drive as partitions even after reformatting it. I also see that part of disk one and part of disk three are still fused together as a LVG, which makes this even more confusing. I cannot understand how all these partitions ended up like this, I did not intentionally add a SINGLE partition to my drive, and never separated the fusion drive until just the other day when I noticed all these extra partitions that couldn't be deleted. I'm beginning to the think the only solution is to do a one pass DBAN over both the drives, and then, (hopefully) I will be able to re-attached them in a fusion drive (which I have been able to do once now), and use an old snow leopard install disk to upgrade back to my Yosemite. Is that my best bet, and are there any risks involved with even doing that? If anyone has any other recommendations on a a simpler, safer way to delete all this extra stuff, and just get myself back to the core components so I can re-fuse my fusion drive and download as fresh OS, I would be beyond grateful.

How do I get rid of the "Extra" stuff? Please help!!

I just got a iPhone 3G today. it came with the 2.1 firmware and my iTunes is 8.0
I added some songs and ringtones to my iPhone, total of 500mb. I checked if they safely got into the phone while the iphone was still hooked up to the computer and everything seemed ok, I could set the custom ringtones and all.
But after a while, the USB went all wonky and continuously made that USB plug-in plug-off sounds you know?
and the iphone lost the connection to the computer. it was physically still attched to the USB to the computer though.
I unplugged it and checked it, and now all the music and ringtones have disappeared. When I tried to hook it up to the computer again, it won't recognize it, won't even make that usb plug-in sound. so I restarted the computer and this time the computer recognized the iphone. iTunes said that I didn't have any ringtones or and songs in my iphone, but the information said that there still was 500mb worth of stuff as "extra" - the orange portion- in the phone, and I really want to get rid of it!!
I did notice the "Erase all data" thing on the setting in iphone, but wouldn't that get rid of my firmware + all the contacts? Is this the only way?
Please help... I want to have a good experience with this phone, and first day I'm already quite disheartened.
Thanks

What you need to do, when all else fails, is put the iPhone into DFU mode.
To do this, turn off your iPhone. Then hold down the power and home button. When you see the Apple logo, release the power button but continue holding the home button down.
It will then, eventually, be patient, come up with a cord and the iTunes logo, plug it in, and you should be right.
This deletes EVERYTHING.
I know that conventionally, this would seem like the worst possible option, but seeing as yours is new, no harm done!
Hope I've helped

I have 10.6.8 and am just installing logic pro 9. I am downloading the extra 20gig of material. I am installing Logic on my laptop as well and dont want to download the extra 20 gig again. How do i go about transferring it from the computer to the laptop?

Hi
I am using OS 10.6.8 and just installing logic pro 9. I am downloading the extra 20gig of material - the additional content packages. I am installing Logic on my laptop as well and dont want to download the extra 20 gig again. How do i go about transferring it from the computer to the laptop?
Thanks

And now a second newbie question. I have downloaded the additional content and booted up logic for the first time, but the apple loops have not installed and logic is asking me to reinstall the apple loops. But how do I do that? I can see they are in the libray so have downloaded.
Thanks

HT201364 i made the mistake of installing Maverick without having the extra 8 gig of space.

Now am I stuck in a loop of not being able to go back and take off files for the extra space and now able to move forward and restore from Time Machine
Tried to link with a firewire cable and togle "T" to see the HD on another computer to move files, but that didnt work either.

This error may occur if you have a broken download. Please try to re-download and install the trial.

Hide the Column Or Remove the extra data

Hi ALL ,
I have developed using the development procedure from Simon_Hou and it works perfectly fine . Thank you Simon_Hou
http://social.msdn.microsoft.com/Forums/office/en-US/842e2dcb-d949-4297-9d91-eac989692cb5/difference-between-the-grouped-column?forum=sqlreportingservices .
Now then the requirement was to add Total to the developed report that's also solved.
http://social.msdn.microsoft.com/Forums/office/en-US/3536c818-c7f0-4757-953c-003d19921311/grand-total-for-matrix-based-report?forum=sqlreportingservices
Now an issue is there extra column that get's generated dynamically ... For that i tried
=IIF(ReportItems!Textbox2.value is nothing, true, false .
The expression does work but the
Total row cells values get repositioned to one cell to the right from it's original position .
Now am fine with the extra empty column only issue if the tablix contain only a single row or two rows of Data then that empty column shows numeric data which is not required. Please refer to the below figure for
clarity . I just want that the
extra column is blank its doesn't show extra numeric data on a single or 2 rows or if it can be hidden without affecting the original position of the total cell .
please kindly help because just due to this the reports are not going for production deployment .
Thanks
Priya

Hi Priya,
According to your description, you want to hide the blank column which is dynamically generated in matrix. Now when you put an expression to hide the column, only the cells inside of group are hidden but the cell in total row is not hidden. So it looks to
be repositioned into one cell to the right. Is my understanding correct?
In this scenario, we also already encountered this issue when we tested in our local environment. It seems to be an issue of internal implement for visibility control in Reporting Services. Now I am trying to involve someone more familiar with Reporting
Services for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
Best Regards,
Simon Hou

Bought Droid 3 BOGO - Is it possible to sell the extra one?

Greetings, early august i decided to upgrade to a droid 3(Buy on get one free) and had intentions of possibly activating the extra one for my son. Now that the bionic is out, I'd like to sell my EXTRA droid 3 via ebay or craigslist. IS there anything that could go wrong with that? I have good financial standing with verizon as far as i know and my son seems to be really interested in getting the bionic. Any help is appreciated. Thanks.

jschultz2 wrote:
I'm not sure your information is correct, when I bought the phone(s) I requested to only have assigned only my phone number with a droid 3. It has been well over a month without activating the second phone, and no charge has come upon my account for the extra phone. I arrangred the purchase with a representative over the phone at a call center in tennessee, I myself live in florida. Me and my son also have grandfathered unlimited datga, and i am not willing to drop that.
Perhaps when you arranged the purchase with the rep over the phone, the contract on two lines WAS extended and the original phone on one of the extended lines was left? Working with a rep on the phone may have accomplished this by briefly activating the Droid 3 and then immediately re-activating the original phone.
The way to be sure is to check the upgrade dates on the 2 lines that were eligible for upgrade and see if the contracts were extended till 8/2013. If they were not, then expect a huge bill this next cycle, since the time frame for activating the Droid 3 has passed.
And let us know what happens?

Remove the "Extras" after they've been installed

Way back when I installed my FC Studio 2 and Shake I also installed all the extra content (optional templates, content, and tutorials etc.) and now in hindsight, I wish I hadn't. Can I just remove/relocate that content and can it be done w/o any adverse effects or will I have to delete and reinstall FCS and Shake? If I can just move/delete them, where are they exactly?
If I have to reinstall Shake, I have another problem. I've misplaced my booklet with the serial number. Can I email tech support for a new one? Will they have record of it from when I registered?
Message was edited by: The Bundok

The default location for the Soundtrack Pro content is /Library/Audio/Apple Loops/Apple/
- Sound Effects - Music Beds - Music Loops -
The default location for the Motion content is /Library/Application Support/Final Cut Studio/Motion/
- Motion Template Content - Motion Library Content - Motion Sample Media
The default location for the DVD Studio Pro content is /Library/Application Support/Final Cut Studio/DVD Studio Pro/
- NTSC and PAL Template - iDVD Theme Elements
The default location for the LiveType content is /Library/Application Support/LiveType/
- LiveFonts - Templates - Objects - Textures

Is the GeForce GTX 960 worth the extra cost over the GTX 750 Ti?

Today I acquired an eVGA GeForce 960 FTW card with 2GB of GDDR5 VRAM to test against my main PC's existing GeForce GTX 750 Ti (also with 2GB of GDDR5 VRAM).
But first, here's my impetus:
Despite the fact that the GTX 750 Ti was newer than my now-sold GTX 660, I felt that the GTX 750 Ti was a sizable downgrade from the GTX 660 in some ways, and equal to the GTX 660 in others. In particular, the results of the GTX 750 Ti during the encoding test from the PPBM8 MPEG-2 DVD timeline was nearly 30 percent slower than the GTX 660 (50 seconds versus 36 seconds) - but in the encoding test from the H.264 Blu-ray timeline, the two cards were practically equal in performance (at about 135 seconds).
And today, when I shopped for an eVGA GTX 960, I found four different models: The Superclocked edition (slightly overclocked but with the reference NVidia blower-type cooler), the ACX 2.0 (upgraded cooler but only reference GPU and memory clocks), the SSC edition (overclocked to 1279 MHz on the GPU, with the ACX 2.0 cooler) and the FTW edition (ACX 2.0 cooler, overclocked to 1304 MHz). All the listed clock speeds are the non-Turbo clocks.
Back to my purchase:
At my local chain big-box store, the FTW edition sells for $220 - but another big-box store wants $230 for the SSC edition.
I brought home the FTW edition, and installed it into my i7-4790K main rig. The CPU is set to its default Turbo clocks while the system's DDR3-1600 RAM is set to run at its XMP profile.
Here are the MPEG-2 DVD and H.264 Blu-ray scores with both cards:
MPEG-2 DVD (MPE On)
MSI GTX 750 Ti OC Edition: 50 seconds
eVGA GTX 960 FTW Edition: 44 seconds
H.264 Blu-ray (MPE On)
MSI GTX 750 Ti OC Edition: 135 seconds
eVGA GTX 960 FTW Edition: 114 seconds
As one can see, the GTX 960 is 13.6 to 18.4 percent faster than the GTX 750 Ti. However, while my GTX 750 Ti cost $155 (and still costs that much at the big box store I went to earlier in the day - the one that sells the GTX 960 SSC for $230), is the FTW edition of the GTX 960 worth the extra $65? Well, that depends on which GTX 750 Ti and which GTX 960 that you might be considering for a PC based on a mainstream quad-core Intel platform.
So, based on the particular results that I posted in this post, do you think that the GTX 960 is worth the extra bucks over the GTX 750 Ti? I would love to hear/see your opinion(s).

Randall,
While I certainly value the PPBM6 benchmark to compare various hardware and configuration settings, the GPU performance that is most important to me is simply playing back timelines smoothly with playback set for full resolution (vs. 1/2, 1/4, etc.) and scrubbing with the upmost in responsiveness. It may be difficult to measure playback smoothness, but you can use the dropped frame counter to compare various hardware.
If playback is smooth and I can scrub my timelines effortlessly, then how fast it takes to render a finished project out just really doesn't matter that much.
Even though you are mostly working with 1080 resolution media now, it may not hurt to try some more difficult media as well (aka RED 4k, PPBM H.264 timeline, etc.)
Regards,
Jim

Is it worth the extra money to get 256mb video memory?

hi
im waiting for a radeon 9600xt and started to think.
is it worth the extra money to get 256mb memory instead of 128?
i want the card to last a year or 2.
bye

True, the question is when...
I find it hard to spend that kind of money right now since I have a good feel for what's around the corner, but if I must, I would consider sitting on my cash until the 256 version gets a little cheaper.. at newegg its about a $150 difference.
It's all relative to what you want and what you have in your pocket, credit vs cash, the need for bragging rights, especially if you're a benchmark whore
In a few years or give or take, these cards will be more like GF3's and obsolete with PCI express around the corner, "Slowpoke" is an understatement

Truecrypt is now in the [extra] repo

Similar Messages

Maybe you are looking for