Trumpet is greyed out

I just installed FINAL CUT STUDIO 2 (which took about 7 hours as I installed everything).
It said that it was successful, however, in the INSTRUMENTS section the Trumpet option is greyed out. I checked all the other other sections and they didn't have any options greyed out.
I was just wondering why this may be?
Best,
Evan Jacobs

patrickfromparanaque city wrote:
what if it is hardware issues ???  there is a wifi network nearby actually it is very near to the router..... i did reset and restore it for so many times but it came out  to nothing .... do you think it is hardware malfunction??? is it covered by the warranty and services if it is hardware issues?? thanks for your reply
If it's a hardware issue, it's definitely covered by the warranty.  However, I doubt that it's hardware.
Did the iPad EVER work with THIS PARTICULAR WiFi system?

Similar Messages

  • Option to insert layer greyed out dreamweaver CSS4

    Hello,
    I installed dreamweaver CSS4 and the option to insert a later is greyed out. I previously used dreamweaver MX 2004 to create my site. Is there a new way to insert layers? Thanks Andrea

    Murray, I'm going to get cranky here.
    When using AP Divs in concert with Flash and also in concert with Spry and other Javascript, you certainly do have to put them on the page in the right order or your Spry menus will not fall over your  AP Divs in visually-appropriate layering. This makes them tricky.
    The mantra that an AP Div is absolutely positioned relative to its containing element flies out the window in such situations. To be clear, one must re-think which containing element one is using...it doesn't not work...and the solution is to change one's thinking in terms of which containing element to use.
    I have recently worked (and worked and worked) on getting such a page to function the same in all browsers. So you can't tell me that they all render the same, because they do not. Ultimately, they did, but mainly because I changed my code.
    It is very possible that you have successfully internalized the order in which it is necessary to make things work from the very beginning (Good for you!) or you have heeded the generally trumpeted call to not use AP Divs. In constructing this particular page (a page with a large background image over which must be located numerous other bits, including a Spry Menu Bar), I worked from the top down as I usually do, and "top down" (top of the viewport from header to footer) is not always the same as "picture plane out" in stacking order.
    Every browser except the Microsoft browsers must be reading my mind and my assigned z-order, and interpreting stacking as I do, as I work from the top down. Microsoft insists that APDivs that will later be expected to "lie down" under Spry Menus and so forth be coded and loaded BEFORE those Spry Menus show up.
    So as I worked, I converted some of the AP Divs (conveniently positioned, but ultimately unworkable because of IE) to Relative Divs. It is not a system I use frequently, and it is not my usual system, and it is not the system I would necessarily recommend, but it is possible as a solution to an untenable situation.
    Such is my experience, decidedly on a shorter calendar than yours, but there it is.
    Beth

  • Text wrap options are greyed out

    Hi,
    I am trying to create a "drop cap" by selecting a text box and changing the wrap options in the inspector however, the "object placement" options to wrap the text are greyed out and I can not change them, except for the options below, such as "object causes to wrap" check box and the "text fit" boxes.
    Is this a glitch? I have restarted both my program and whole computer, as well as tried it in a new document, and it still is coming up greyed out.
    HELP, I have a project due and I need to be able to add in drop caps!
    Thanks

    Hi Architecture Guy
    Welcome to the forum.
    A better method for creating drop caps:
    http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=85&mforum=iworktipsn trick
    Peter

  • Wi-fi option on my ipod touch is greyed out?

    Hi,
    My ipod touch won't connect via wi-fi and the option is greyed out when I try to connect manually. Two other ipod touches in my house are working fine. I've already reset it 3 times and no change.
    Help!

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    One user reported that placing the iPod in the freezer fixed the problem. A trick that works frequently with iPhones:
    Settings > AirPlane Mode ON, Do Not Disturb ON
    Power down and wait 5-10 minutes
    Power up
    Settings > AirPlane Mode OFF, Do Not Disturb OFF
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • How to grey out terms of payment in sales order.

    Hi,
    While making sales order ,user should not make changes in terms of payment.how we  can restrict the user for any changes.
    and what is procedure for this.
    Regards,

    you can get many treads if you had searched with your subject.Anyway please find one among them.
    payment terms-greyed out field
    I would prefer going for option of activating critical field in OVA8 if Credit management is configured in your client process.
    thanks,
    Srinu.

  • For Z Po order type - Item category field is  greyed out.

    Hi MM Experts,
    I am an ABAper working on PO creation with respect to PR( PR with account assignment N)  for Z order type . The requirement includes to update item category of PO with B , But for this Z order type both PO transaction Create/Change(ME21/ME22) the field item category has been greyed out ( Non editable). I checked the SPRO setting for this order type ( SPRO-MM->Purchasing-PO->Define Screenlayout at document level .The field item category has been made as optional.
    Please let me know why this field ( item category still showing in display mode) and How to make it as editable .I need it as editable in ME22 to implement the new requirement of updating that field with item ategory B.
    Thanks in Advance
    Pravee.

    Hi All,
    Since I was creating a PO with respect to PR - after running through all the screens the item category field was becoming non editable, But during the create in one of screen the field item category was still editable, so I updated the item category with B during the create and created the PO, I have used BDC to do the same and its working fine. Thanks for all your inputs.
    Thanks
    Pravee.

  • ITunes 11 has moved most of my audiobooks to music, and greyed out the "audiobook" option in the info pane.  WHY?!?!?

    Now I have a music library filled with audiobook content and music content all mixed up, playing EVERYTHING when I'm on shuffle because iTuness 11 has now also reset the previously-audiobook-now-music content not to be skipped in shuffle, and I can't fix it because the option is greyed out.  Can anybody help me? 

    Just an update, following last nights USB sync all music shows as In the library on my iPhone, however only the same 500 or so songs are playable, the rest go from appearing to be in the library to going into the cloud and starting to download when manually selected. If on shuffle the music skips over them. The iPhone  memory usage shows only about 10gb used most of which is for the iOS/apps, so once again my music library is not on my iPhone. Apple have managed to take a great product and turn it into a steaming pile of turd.

  • My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management

    I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
    My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
    Could there may be a setting somewhere that I need to adjust please?  I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
    <Edited by Host>

    Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.

  • Cannot move junk email to Bulk Mail folder in Yahoo, greyed out

    I've searched but so far no luck.  Ever since I added my two Yahoo email accounts on my iPhone 4, I cannot seem to send junk email from my inbox to my Bulk Mail folder, it is greyed out.  First off, I've confirmed that the Bulk Mail folder on my iPhone is the same as my Spam folder in Yahoo mail on the desktop.  I can see the same emails in both folders.  Anyone have the same experience and found a way to correct this, or is this just a Yahoo limitation?

    I am having the same problem, but I'm not very clear on how to follow the steps.
    went to my yahoo account in IOS;
    hit edit, hit "new mailbox" at the bottom right corner of the screen;
    entered a name;
    below that, it has "Mailbox Location", I opened it;
    it list all my personal folders, I am stuck here.
    How do I "point the mailbox location to the Bulk Mail folder", as instructed? Am I missing a step?
    This is for iPhone 4S, with the latest released version. Thank you!

  • How do you grey out/disable fields under a radio button if another radio button is selected in Adobe Acrobat XI Pro?

    How do you grey out/disable fields under a radio button if another radio button is selected in Adobe Acrobat XI Pro?
    I’m creating a form where the user has three options to make a payment.
    1. charge to my credit card
    2. charge associated costs to bank account
    3. By cheque or money order
    My Problem is, under each option, there are required fields that has to be filled out. So if the user picks the first option, charge to my credit card, they would fill out the required fields (credit card number, expiration date etc.). But when they click submit button to submit the form, it won’t let them, because there are required fields under the second option. Also, I have the radio buttons for the three options setup so that if the user holds the shift key and clicks a radio button, it unchecks it. So what I'm trying to do is this: If the user selects the radio button for option 1, the other two options are greyed out/disabled. And if the user holds down the shift key and clicks radio button for option one again, it unchecks the radio button and the other two options are available again. Is there a way to grey out or disable the two other payment options when the other one is picked. I’m assuming I will have to use javascript, but what would the coding be and which field do I write it under?
    Thanks in advance guys

    You will have to use custom JavaScript to access the various properties of the field object.
    The radio button group has a value. When no button is selected that value is "Off". When an individual button has been selected the value for the group will be the option or export value for that individual button.
    Once you have determined the button selected, then you will know the form fields that need to be made required. You use JavaScript to access those fields and change the "read only" property to false, and set the "required" property to true. For the fields associated with the other options, those fields should be reset, made read only, and have the "required" property set to false.
    Disabling (graying-out) Form Fields
    >> Also, I have the radio buttons for the three options setup so that if the user holds the shift key and clicks a radio button, it unchecks it.
    Radio button in a PDF do not work that way. Only check boxes can be unchecked by clicking on one that has been checked.
    If you plan the coding for the Mouse UP action to test for all possible options and code for each of those options you should have what you want.
    If you want actual code you need to provide a lot more details.
    It is even possible to perform some credit card and bank routing number validations with JavaScript and some check digit formulas.

  • How do you grey out a radio button if a text field is blank in Adobe Acrobat XI Pro?

    How do you grey out a radio button if a text field is blank in Adobe Acrobat XI Pro?
    So this what I'm trying to do:
    (     )   |TEXT FIELD|
    (     )   |TEXT FIELD|
    (     )   |                  |
    (     )   |TEXT FIELD|
    I have a radio button: (     )
    and a text field: |TEXT FIELD|
    The third text field is blank, and I would like for the radio button next to it greyed out (user can't click on it) since the text field is blank. Is this possible to achieve? I'm assuming I'll have to use javascript, but what would the code be and would it be entered in the javascript editor for the text field or the radio button?
    Thanks in advance guys

    Hey, thanks, but it didn't work
    I have the text fields as read only. Could that be why it's not working? Should I make the fields not read only?
    Thanks,

  • Application bar is greyed out under window menu

    Although I can see an application bar on my document, it is "greyed out" under the window menu. Specifically when I click the icon to arrange documents ie - tile vertically/horizontally - everything is greyed out

    Hi,
    Do you have a project open?
    if so double click on a sequence and the timeline should appear. Or start a new project if you don't have one open.
    DM

  • Voice Memos Greyed Out After iCloud Restore

    I lost my iPhone 4S and just set up my new iPhone 5 by restoring from iCloud.  The Voice Memos are greyed out.  Is there any way to get them back?
    Thanks!

    Whups, never mind.  They all became accessible, today.  All it took was time

  • IPhone from UK can't be replaced in India :( wifi greyed out

    My friend gifted me a iPhone 4s last year from UK, after using it from a year the wifi suddenly greyed out/ ocassionally gets connected to wifi but most of the time its out, Now i am in India and have no plans to visit UK, is there anything that i can do as store here says that it would not be replaced in India and i have to visit UK for repair or replacement. Please help

    Apple is "answerable", but as has been said, Apple will provide no service, paid or warranty, for an iPhone outside of its country of sale. With just about every country requiring a different model/configuration of iPhone, Apple has apparently decided that it is not feasible for every service center to be able to provide every model, hence the restrictions. Most smartphone manufacturers have the same policy.
    This is Apple's policy and there's nothing further any of us, your fellow users, can tell you.
    Regards.

  • Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verif

    Help needed. I have a 3TB external hard drive partitioned into 1TB's. I used one partition as backup for the main computer hard drive. But now it is greyed out as shown in the disk utility and its name changed, i dont know how that happened, i tried verifying and repairing it but had no luck. I also tried mounting and unmounting it but still no solution. Anyone to help please?

    Looks bad. I would strongly advise backing up the stuff on the other two partitions as soon as possible in case the rest of the drive goes wrong.
    Beyond that, Disk Utility has limited abilities to repair disks, DiskWarrior uses a different approach and might, emphasis might be more successful. It has certainly done the job for me in the past when Disk Utility could not.
    See http://www.alsoft.com/diskwarrior/

Maybe you are looking for