Truncated links and URLs

Many documents I find with Safari display a truncated URL. If I send this URL to someone else, it is impossible to use the link. How can I access the full URL?
Thanks for helping

If the full URL is visible in the status bar at the bottom of the window, control-click it and choose Copy Link. If the link was created using an URL shortening service, running a curl -si command on it in the Terminal will reveal the full URL without following it.
(54767)

Similar Messages

How to display URL images and URL link (html) from Smartforms?

Hi Gurus,
I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
My code is like this..
<--- Start Code.
FORM call_smartforms.
DATA : lv_subject TYPE so_obj_des,
         lc_true(1) VALUE 'X',
         lw_control_parameters TYPE ssfctrlop,
         lw_output_options TYPE ssfcompop,
         lc_graphics(8) VALUE 'GRAPHICS',
         lw_xsfparam_line TYPE ssfxsfp,
         lc_extract(7) VALUE 'EXTRACT',
         lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
         lc_mygraphics(11) VALUE 'mygraphics/',
         lc_content_id(10) VALUE 'CONTENT-ID',
         lc_enable(6) VALUE 'ENABLE',
         lw_job_output_info TYPE ssfcrescl,
         lw_html_data TYPE trfresult,
         lw_graphics TYPE ssf_xsf_gr,
         lt_graphics TYPE tsf_xsf_gr,
         lv_html_xstr TYPE xstring,
         lw_html_raw LIKE LINE OF lw_html_data-content,
         lv_incode TYPE tcp00-cpcodepage VALUE '4110',
         lv_html_str TYPE string,
         lv_html_len TYPE i,
         lc_utf8(5) VALUE 'utf-8',
         lc_latin1(6) VALUE 'latin1',
         lv_offset TYPE i,
         lv_length TYPE i,
         lv_diff TYPE i,
         lt_soli TYPE soli_tab,
         lw_soli TYPE soli,
         lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
         lv_name TYPE mime_text VALUE 'sapwebform.htm',
         lv_xstr TYPE xstring,
         lw_raw TYPE bapiconten,
         lt_solix TYPE solix_tab,
         lw_solix TYPE solix,
         lv_filename TYPE string,
         lv_content_id TYPE string,
         lv_content_type TYPE w3conttype,
         lv_obj_len TYPE so_obj_len,
         lv_bmp TYPE so_fileext VALUE 'BMP',
         lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
         lc_doc_bcs TYPE REF TO cl_document_bcs,
         lc_bcs TYPE REF TO cl_bcs,
         lc_send_exception TYPE REF TO cx_root,
         lw_adsmtp TYPE lty_adsmtp,
         lv_mail_address TYPE ad_smtpadr,
         lc_recipient TYPE REF TO if_recipient_bcs,
         lc_send_request TYPE REF TO cl_bcs,
         lv_sent_to_all TYPE os_boolean.
DATA : v_language TYPE sflangu VALUE 'E',
         v_e_devtype TYPE rspoptype.
v_form_name = 'ZTEST_EMAIL'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      formname           = v_form_name
    IMPORTING
      fm_name            = v_namef
    EXCEPTIONS
      no_form            = 1
      no_function_module = 2
      OTHERS             = 3.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
starting here. ***
Set title for the output
lv_subject = 'Smartforms.'.
Set control parameters to "no dialog"
lw_control_parameters-no_dialog = lc_true.
IF lw_service_subject-code = lc_fm1.
*--- To get output device type
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
    EXPORTING
      i_language    = v_language
      i_application = 'SAPDEFAULT'
    IMPORTING
      e_devtype     = v_e_devtype.
lw_output_options-tdprinter = v_e_devtype.
lw_control_parameters-getotf = 'X'.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
Set output options
lw_output_options-xsf        = lc_true.
lw_output_options-xsfcmode   = lc_true.
lw_output_options-xsfoutmode = 'A'.
lw_output_options-xsfoutdev = space.
lw_output_options-xsfformat = lc_true.
lw_xsfparam_line-name = lc_graphics.
lw_xsfparam_line-value = lc_extract.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_graphics_directory.
lw_xsfparam_line-value = lc_mygraphics.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_content_id.
lw_xsfparam_line-value = lc_enable.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
Get the smartform content
CALL FUNCTION v_namef
    EXPORTING
      control_parameters   = lw_control_parameters
      output_options       = lw_output_options
*pass other application specific parameters (eg order number, items ).
IMPORTING
      job_output_info    = lw_job_output_info
TABLES
      tt_tabh              = tt_tabh
      tt_tabb              = tt_tabb
      tt_tabf              = tt_tabf
EXCEPTIONS
      formatting_error = 1
      internal_error   = 2
      send_error       = 3
      user_canceled    = 4
      OTHERS           = 5.
IF sy-subrc = 0.
   break mhusin.
ENDIF.
lw_html_data = lw_job_output_info-xmloutput-trfresult.
lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
CLEAR lv_html_xstr.
LOOP AT lw_html_data-content INTO lw_html_raw.
    CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
ENDLOOP.
lv_html_xstr = lv_html_xstr(lw_html_data-length).
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
    EXPORTING
      inbuff       = lv_html_xstr
      incode       = lv_incode
      csubst       = lc_true
      substc_space = lc_true
    IMPORTING
      outbuff      = lv_html_str
      outused      = lv_html_len
    EXCEPTIONS
      OTHERS       = 1.
*HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
*EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
CALL METHOD html_control - >load_mime_object
   EXPORTING
     object_id = 'ZWN'
     object_url = 'ZWN.GIF'
   EXCEPTIONS
     OTHERS     = 1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
   break mhusin.
lv_html_len = STRLEN( lv_html_str ).
lv_offset = 0.
lv_length = 255.
WHILE lv_offset < lv_html_len.
    lv_diff = lv_html_len - lv_offset.
    IF lv_diff > lv_length.
      lw_soli-line = lv_html_str+lv_offset(lv_length).
    ELSE.
      lw_soli-line = lv_html_str+lv_offset(lv_diff).
    ENDIF.
    APPEND lw_soli TO lt_soli.
    ADD lv_length TO lv_offset.
ENDWHILE.
CREATE OBJECT lc_mime_helper.
CALL METHOD lc_mime_helper->set_main_html
    EXPORTING
      content     = lt_soli
      filename    = lv_name
      description = lv_subject.
LOOP AT lt_graphics INTO lw_graphics.
    CLEAR lv_xstr.
    LOOP AT lw_graphics-content INTO lw_raw.
      CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
    ENDLOOP.
    lv_xstr = lv_xstr(lw_graphics-length).
    lv_offset = 0.
    lv_length = 255.
    CLEAR lt_solix[].
    WHILE lv_offset < lw_graphics-length.
      lv_diff = lw_graphics-length - lv_offset.
      IF lv_diff > lv_length.
        lw_solix-line = lv_xstr+lv_offset(lv_length).
      ELSE.
        lw_solix-line = lv_xstr+lv_offset(lv_diff).
      ENDIF.
      APPEND lw_solix TO lt_solix.
      ADD lv_length TO lv_offset.
    ENDWHILE.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
    CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
    lv_content_type = lw_graphics-httptype.
    lv_obj_len      = lw_graphics-length.
*Add images to the email
    CALL METHOD lc_mime_helper->add_binary_part
      EXPORTING
        content      = lt_solix
        filename     = lv_filename
        extension    = lv_bmp
        description = lv_description
        content_type = lv_content_type
        length       = lv_obj_len
        content_id   = lv_content_id.
ENDLOOP.
TRY.
      lv_subject = lv_subject.
      lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
               i_subject          = lv_subject
               i_multirel_service = lc_mime_helper ).
    CATCH cx_document_bcs INTO lc_send_exception.
    CATCH cx_bcom_mime INTO lc_send_exception.
    CATCH cx_gbt_mime INTO lc_send_exception.
ENDTRY.
Create send request
TRY.
      lc_bcs = cl_bcs=>create_persistent( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->set_document( i_document = lc_doc_bcs ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Set-up email receiver
lv_mail_address = '[email protected]'.
TRANSLATE lv_mail_address TO UPPER CASE.
TRY.
      lc_recipient = cl_cam_address_bcs=>create_internet_address(
          i_address_string = lv_mail_address ).
    CATCH cx_address_bcs INTO lc_send_exception.
ENDTRY.
TRY.
      lc_bcs->add_recipient( i_recipient = lc_recipient ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Send smartforms as HTML email
TRY.
      lc_bcs->send( ).
    CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
COMMIT WORK.
WRITE:/ 'Mail sent'.
ENDFORM.                    "call_smartforms
End Code --->
Thanks and Regards.

1- put your images in a directory under the web app directory. Example: app/images/
2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead

How to schedule and deliver a report in OBIEE 11g as an link or url to the report ?

I am using OBIEE 11.1.1.6. We have a requirement to schedule and deliver reports as a URL and not as an attachment ( as the file sizes are quite huge ). Have any one implemented such a scenario ? If so kindly share was it an out-of-tne-box solution or used web services ? Thanks in advance

Hello user9210174,
I have tried in this way.Let me know if it meets your requirement.
Created a dummy report with all the reports embedding as a Link and this report i have inserted into a dashboard then created an agent to schedule this dashboard.
Thanks,
Sasi Nagireddy..

FrameMaker 9 - URL's not linked and/or not updated in .pdf output

I'm editing (or trying to) a .book that someone else (former tech writer at work) created. I can find the URL references (markers) and have updated them and/or updated the commands in them as best I can tell. (As best I can tell meaning that I see them saying that they are linked to the right address. We now require https: where we previously support http: access to a certain site, so I'm having to update all of the links that would go to that site that are included in the document that I'm trying to update)
The problem is multiple, as in I'm working on 2 different documents. In one of them it would appear that most of the links are just gone. Where I edited the marker to go to the right site there is no longer a link to the site at all.. just the text that shows the site name that was there as a hotlink before :-(
In the second document I'm having a similar issue, the hotlink that should be going to the site I want to reference is just gone. The text that should be a hotlink to the site is there, it's underlined as it was before, but the hotlink is gone... just the text remains with no hotlink in the .pdf file that is created when I print the book to .pdf
The other issue is that I updated the markers in the headers/footers to go to the https: address and yet the links that are there in the headers/footers are showing http: and that is where the hotlinks are trying to get to.
I'd appreciate any help anyone can offer on what I may be doing wrong or how to correct the issue.
Thanks!

Barry,
It could be that whomever was creating the documents before simply relied on Acrobat's ability to convert URLs to active links dynamically, instead of inserting the actual hypertext markers on the FM end of things. In that case, you will have to add the markers manually.
There also may be a conflict between what Acrobat is automatically trying to interpret as a link and what you have defined by the marker to be the link. FM uses the formatting range that the marker is inserted into to delimit the "hot" zone for the link. So if the marker is inserted outside of a formatting change (i.e. not blue and underlined), then you may end up with two links in Acrobat.

ASSIGNING REPORTS AND URL LINKS IN ROLE

Hello Gurus,
could you please tell me the procedure of asigning Reports, specific tables and Url links in the role.actually i know the process of assigning T-Codes to the role but i dont know the procedure for reports and url links and tables...
i hope u people will respond positively.
Cheers.......
srinivas.korva
Message was edited by:
srinivas.korva korva

Hi Nuno,
you can achieve this by changing the XSL file.
Check out this thread for more infos: XML form display in same browser window
Best regards,
Robert

Asigning Reports, specific tables and Url links to the Role

Hello Gurus,
could you please tell me the procedure of asigning Reports, specific tables and Url links in the role.actually i know the process of assigning T-Codes to the role but i dont know the procedure for reports and url links and tables...
i hope u people will respond positively.
Cheers.......
srinivas.korva

Hi Srinivas,
"i want to add only one particular table not all tables", you can do this using a Custom Transaction Code, the following are the steps to do it:
1) goto se93, give a unique name, say zxxx
2)Enter SE16 into the transaction field and select the flag the skip initial screen field:
3)On the lower portion of the screen, enter the following information:
Name of screen field: DATABROWSE-TABLENAME
Value: Enter the name of the table you want to browse with
4)save it.
5) Now add the transaction zxxx in th role, and assign it to the user.
With this, when user executes the transaction, he/she will be able to see only the perticular table you added.
"in PFCG what is the use of Exper mode for profile generation. what is the difference between general profile generation and expert mode profile generation".
Expert mode has 3 options:
1) Delete and recreate profile and authorizations---This will completely delete the old profile and add only the new once.
2) Edit old status----It will edit the old values
3) Read old status and merge with new data----This will add the new values aithout actually disturbing the old ones.
Hope it helps.
Please award points if it is useful.
Thanks & Regards,
Santosh

URL Link and the W over the hand tool?

I think I have two things going here. 1 is how do I unlink a PDF to a URL? 2 what is the W over the hand tool? I want to highlight some text but the hand with the w shows the link of where I found the pdf and does not allow me to make the text changes I'm wanting to.

Second question first: The W over the Hand tool means that your link will open in your browser (W = Web).
First question: The link may have been created in the PDF file. But Acrobat/Reader by default creates links when it recognizes a URL. You can turn this off in Preferences > General. Uncheck "Create Links from URLs".

Interface Controller and Link to URL

Hi Experts,
Could some give me the step by step process(PDF's suggested) for the Interface controller and Link to URL.
Regards.

hi,
The application of downloading data from table to excel sheet
will give a very good idea and the solution to ur problm
Exporting Context Data into Excel Using the Web Dynpro
Binary Cache
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/edc2f3c2-0401-0010-8898-acd5b6a94353
Regards
Nikhil Tapkir

Getting links and its names from a html file

Hi everyone
My problem about the a getting links with name from a html file. For example
İn a web page in this site ?SUN? when use click SUN the browser open http://java.sun.com
İ want both of them, so the links and name. I can succeeded the get link but i don t know how to get the link name.
For example :
<B>setRightComponent(Component)</B>
İn this code segment i want to get B tag. But how i don t know. To get A tag i used this code
List result = new ArrayList();
try {
// Create a reader on the HTML content
URL url = new URI(uriStr).toURL();
URLConnection conn = url.openConnection();
Reader rd = new InputStreamReader(conn.getInputStream());
// Parse the HTML
EditorKit kit = new HTMLEditorKit();
HTMLDocument doc = (HTMLDocument)kit.createDefaultDocument();
kit.read(rd, doc, 0);
// Find all the A elements in the HTML document
HTMLDocument.Iterator it = doc.getIterator(HTML.Tag.A);
while (it.isValid()) {
SimpleAttributeSet s = (SimpleAttributeSet)it.getAttributes();
String link = (String)s.getAttribute(HTML.Attribute.HREF);
if (link != null) {
result.add(link);
it.next();
İ can use B tag but i don t know hot to get its value because it has no prefix such as HREF....
i am sorry if i use a bad explanation style or incorrect word.

import java.io.*;
import java.net.*;
import javax.swing.text.*;
import javax.swing.text.html.*;
class GetLinks
    public static void main(String[] args)
        throws Exception
        // Create a reader on the HTML content
        Reader reader = getReader( args[0] );
        // Parse the HTML
        EditorKit kit = new HTMLEditorKit();
        HTMLDocument doc = (HTMLDocument)kit.createDefaultDocument();
        doc.putProperty("IgnoreCharsetDirective", Boolean.TRUE);
        kit.read(reader, doc, 0);
        // Find all the A elements in the HTML document
        HTMLDocument.Iterator it = doc.getIterator(HTML.Tag.A);
        while (it.isValid())
            SimpleAttributeSet s = (SimpleAttributeSet)it.getAttributes();
            String href = (String)s.getAttribute(HTML.Attribute.HREF);
            int start = it.getStartOffset();
            int end = it.getEndOffset();
            String text = doc.getText(start, end - start);
            System.out.println( href + " : " + text );
            it.next();
    // If 'uri' begins with "http:" treat as a URL,
    // otherwise, treat as a local file.
    static Reader getReader(String uri)
        throws IOException
        // Retrieve from Internet.
        if (uri.startsWith("http:"))
            URLConnection conn = new URL(uri).openConnection();
            return new InputStreamReader(conn.getInputStream());
        // Retrieve from file.
        else
            return new FileReader(uri);
}

Link to URL -- pdf should open in new window - Error

Hi experts,
I have a Web Dynpro Application with an ALV and a link to url in one column. The code is ok. It works fine. When I click on the URL a new browser window opens with the correct URL, but I get an Error --> "The requested URL could not be retrieved".
It should be a pdf. But Acrobat Reader does not open. If I put the URL in Firefox Browser, it works perfect. Acrobat Reader opens and shows the pdf.
The same happens when I use Windows 2000 System with Internet Explorer version 6.0.2800.1106.
I have normally Windows XP with Internet Explorer version 6.0.2900.2180 with sp2.
What can that be? On both computers I have the same version of Acrobat Reader with the same configuration.
Had someone of you this problem, too? Who can help?
Thanks a lot.
Best regards,
Ingmar

I answered it myself. I had to look that for the called server no proxyserver will be used...

Regarding Link to URL UI Element in a table

Hi All,
I am using "link to url" UI Element in a table column. I have mapped the column (i mean the "reference" property of "link to url" UI to a bapi node). Now, when I am populating the table, for some rows the bapi is not returning the url links. So, the column is getting disabled and not even showing the links for the rows which are getting the url link from the bapi.
Is there any way to set the mapping row wise, so that the rows which have data get enabled with the link and which do not have data will be disabled.
Also, can I make the whole table readonly, except for one column.
Please help me in this regard.
Regards,
Murthy.

Hi Armin,
Thank you very much. The problem is solved. 10 points for you.
Another Question.......
Can we make the table readonly, leaving just one column to select.(that is the column with link to url). Is it possible? If so, please tell me how....
Also, can you tell me the reason for the following exception.....
<b>com.sap.tc.webdynpro.progmodel.context.ContextConfigurationException: DataNodeInfo(CreateTemplateComp.Zad_Bapi_Get_Template_Details_Input.Output.T_Template_Details): structure field Ad_Height not found
    at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:299)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
    at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
    at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
    ... 49 more</b>

"Create links from URLs" preference no longer working in sticky notes

I work with reading other people's sticky notes in Adobe Acrobat X Pro (now version 10.1.1). When they wrote URLs in the sticky notes it used to recognize them as links; now they're just plain text. My Preferences > General > "Create links from URLs" option is checked ON. I aso tried View > Tools > Document Processing > "create Links from URLs" and it added two links but only outside of the sticky notes. I am on Windows 7 Professional 64-bit. Thanks.

AFAIK, URLs inside annotations were never converted into actual links. I'm not even sure it's technically possible to do so.
It might have happened if the annotations were flattened and the text in them became a part of the static text of the PDF. Then the URLs in it could have been converted into "live" links, but not before.

CS3 - How can I preserve Links and Hyperlinks in my INDB?

I am still pretty new to ID, so please speak slowly :)
My problem - I create an INDB that consists of several indd chapters. The chapters include numerous Links (to PNG & PSD images) and Hyperlinks both to Text anchors to other chapters within the INDB, as well as to URLs. I have all items saved on my local HD. Once complete, I do "Package for Print", check the Preflight report to make sure all is OK (it is) and then save the new INDB folder in a new location on my local HD. This all seems to work just fine, BUT if I move this packaged INDB folder (such as to a backup drive, or give to another worker that copies it to their HD), upon opening the INDB file, some links and Hyperlinks are broken.
It seems that these broken Links and Hyperlinks are still pointing to the original locations on my HD. But obviously not all are, since most links/hyperlinks DO work fine. The Hyperlinks to Text anchors within other indd chapters seem to typically break. Is there a way to force these to reference the packaged assets within the INDB folder? Seems ID would be smart enough to look there itself!
Also, I was creating some Hyperlinks as "cross referenced" - that is, I created a URL Hyperlink Destination in Chapter 1 indd and then created Hyperlinks pointing to it from other chapter indd in the book. I have learned that these ALWAYS break in the above scenario, so I started creating the URL destination within the same chapter indd and pointing to it there rather than across chapters. But this is just more work to keep re-creating the same URL destination in every indd!
I'll keep running into these problems since I need to share my finished INDB with other CS3 users. I also would like to be able to do a Save As of the INDB when creating a revised, newer version, but I see this also results in the new INDB links/hyperlinks still pointing to the original INDB's assets! Any way to make the Save As update the Links/Hyperlinks in the new INDB?
Thanks greatly for any insight. I can find no help in the Help on these issues!

The title of the post is this
How can I preserve row and column addresses on multiple cells at once in Numbers?
I restated the Question as follows
Can "Preserve Row" an / or "Preserve Column" be set on multiple cells at the same time.
In both cases it is not asked if multiple cells can be set to....
That is a given.
Step back a second... It is like selecting multiple cells and setting the text color of the currently selected cells to red. This can be done. More than one cell at a time modified because they are currently selected.
Whats is being asked is: if more than one cell is selected at the same time can the settings "Preserve Row" an / or "Preserve Column" be applied. No table I put up will help with that question.
YES or NO
If YES how?

Link to Url properties problem

Hello all,
i am working on link to url UI element.
the url that i have is larger than that i can put in reference property of link to url UI Element.
How may i put whole of the url in reference properties of link to url UI Element without length problem.
Thanks & Regards.
Vikash

workaround:
create an action and open the link via WINDOW API or with an exit plug
http://help.sap.com/saphelp_nw04s/helpdata/en/45/1bc575ba064574e10000000a114a6b/content.htm
regards
stefan

Link to URL - How to Open a New Tab

I have created some PDF's in Adobe Acrobat and I am hosting them on my website. So for example here is one: <possible spam link removed - kglad>
I have created links to URL's using the Link Properties tool, Actions tab. However it will only open the URL in the same tab.
Is it possible to have the URL's open in a new tab?
Hope someone can help.
Heath

You need to use the target="_blank" attribute to make links open in a new window or tab. Where the link actually opens is up to the browser settings. So if you have Tools > Internet Options > Tabbed Browsing Settings > "Always open pop-ups in new tabs" selected, a target="_blank" link will open in a new tab. Note that this type of link will open in a new window by default on most browsers.

Truncated links and URLs

Similar Messages

Maybe you are looking for