Truncated songs after importing to Mac from PC
I got an iMac a month or so ago, and I imported my iTunes colelction from my old PC. But I've realized that a lot of the songs I imported have been truncated -- maybe the last minute or so. Any suggestions -- do I need to delete and re-import? The times all look okay, but the song just stops early. Annoying.
I used an external hard disk to copy the songs from the PC (all i-tunes files) and then copy them onto the iMac desktop. Open the i-tunes from the iMac and drag the files from the desktop to the i-tunes. It works OK except some of the Chinese songs' names were not displayed correctly.
Similar Messages
-
Why can't I open and retrieve my files from iPhoto and my Address Book after importing the files from my Power Mac G5 to my new Mac Pro? I get a warning that says the new OS on my Pro doesn't open files from a Power Mac. Any idea how I can fix this?
For your addressbook, export the files to vCard on the PowerMac, then bring them over to your Mac Pro. For your iPhoto, copy the Users -> yourname -> Pictures folder to your Desktop on the Mac Pro, and open iPhoto on the Mac Pro holding the command and option keys. Select the library file from that Pictures folder and open it. It should import all the pictures into iPhoto as part of the rebuild process. Other PowerPC to Intel migration issues are covered here: https://discussions.apple.com/docs/DOC-2295
-
After import video,s from iphone 5 to a HP computer (Windows 7 ) all the video,s are sideways ! No problem with ipad4 Newest)
How to fix this!Check to see if the phone has enough free space on it. Go to Settings->About on you iPhone and see how much free space there is. It's likely that your phone is out of free space. You could also try using a free peice of software called Pic Share It, to drag and drop the video directly to your iPhone wirelessly. Here's a video showing how it works.
-
After updating my mac from snow leopard to mountain lion, i can not connect to the internet anymore
After updating my mac book pro from snow leopard to mountain lion, i can not connect to the internet anymore ;(
Anyone know what is wrong with it??
Is something wrong with mountain lion or the wifi itself????
HELP PLEASE!!
I need to use the internet desperately but i cant...
Thank you so much xxxHi galleryskins,
The article below may be able to help you with this issue.
Click on the link below to see more details and screenshots.
I've quoted some helpful highlights for you:
OS X Mountain Lion: Zoom content on the screen
Zoom with a mouse or trackpad
To zoom in and out, hold down the modifier key you specified while you perform the scroll gesture.
For example, if you have a trackpad and used the default settings, zoom in by holding down the Control (^) key while you drag two fingers up on the trackpad. Zoom out by holding down the Control key while you drag two fingers down on the trackpad.
If you chose Picture-in-picture zooming, a window appears near the mouse cursor with the magnified image. If you chose Fullscreen zooming, the entire screen displays the magnified image.
I hope this information helps ....
Have a great day!
- Judy -
2012 R2 DC crashes after import Root CA from 2008 R2 DC/CA (with same name)
Hello Everyone.
We migrate a Windows Server 2008 R2 DC with Root CA to an Windows Server 2012 R2 DC with same IP and Computername on a new VM. The Windows Server 2012 R2 works fine before we import the Root CA Information from a Backup (http://technet.microsoft.com/en-us/library/ee126140(v=ws.10).aspx)
After import the Root CA Information, we can´t rename any object, OU, user account, etc, whichever DC AD Users and Computers is pointing at, lsass.exe will crash and the DC will reboot after 60 seconds. Remove ADCS is no helping.
Depromote DC and removing ADDS, reboot... and promote the W12R2 to DC is the same Problem. Now we delete (properly) the Server and reinstall the W12R2 OS and promote the Server to DC. After
new install the rename any object works fine.
Does anyone have an idea? Any help would be appreciated!
Regards AchimHi,
Is there any detail error message?
If the issue is related to CA, i would suggest that you may ask in:
http://social.technet.microsoft.com/Forums/en-US/home?forum=winserversecurity
Regards.
Vivian Wang -
Messages not adviced in extern definition after import wsdl-file from WAS
Hi friends,
after importing the three wsld-files in repository (extern definitions) the messages are not adviced. The referendes to the files are fine, because the name is shown at the tab externe...
But i´m not shure wheather i tool the right link ant Web Service Navigator. It is right to download the default SAP WSDL Files or the default one? Because in the SAP WSDL-files there will be an exception during import in XI repository (tag sap:useFeatur). What is the problem that the messages are not shown on the tab messages in externe definitions?
Thanks in advance,
FrankI've the same problem. Here is my WSDL:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions targetNamespace="http://blablabla.de:8080/jboss-net/services/MyServices" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://blablabla.de:8080/jboss-net/services/MyServices" xmlns:intf="http://blablabla.de:8080/jboss-net/services/MyServices" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns1="blablabla.de" xmlns:tns2="http://net.jboss.org/jmx" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<schema targetNamespace="blablabla.de" xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://schemas.xmlsoap.org/soap/encoding/"/>
<complexType name="MSOBean">
<sequence>
<element name="installationName" nillable="true" type="xsd:string"/>
<element name="requestId" nillable="true" type="xsd:string"/>
<element name="returnCode" type="xsd:int"/>
<element name="returnMessage" nillable="true" type="xsd:string"/>
</sequence>
</complexType>
<complexType name="MSIBean">
<sequence>
<element name="password" nillable="true" type="xsd:string"/>
<element name="project" nillable="true" type="xsd:string"/>
<element name="requestId" nillable="true" type="xsd:string"/>
<element name="userId" nillable="true" type="xsd:string"/>
</sequence>
</complexType>
</schema>
</wsdl:types>
<wsdl:message name="actualizeRequest">
<wsdl:part name="inData" type="tns1:MSIBean"/>
</wsdl:message>
<wsdl:message name="actualizeResponse">
<wsdl:part name="actualizeReturn" type="tns1:MSOBean"/>
</wsdl:message>
<wsdl:portType name="MSService">
<wsdl:operation name="actualize" parameterOrder="inData">
<wsdl:input message="impl:actualizeRequest" name="actualizeRequest"/>
<wsdl:output message="impl:actualizeResponse" name="actualizeResponse"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="MyServicesSoapBinding" type="impl:MSService">
<wsdlsoap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="actualize">
<wsdlsoap:operation soapAction=""/>
<wsdl:input name="actualizeRequest">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://blablabla.de" use="encoded"/>
</wsdl:input>
<wsdl:output name="actualizeResponse">
<wsdlsoap:body encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" namespace="http://blablabla.de:8080/jboss-net/services/MyServices" use="encoded"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="MSServiceService">
<wsdl:port binding="impl:MyServicesSoapBinding" name="MyServices">
<wsdlsoap:address location="http://blablabla.de:8080/jboss-net/services/MyServices"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
No Idea. -
Transitions don't work after importing a project from Premiere to AE
I've imported a project from Premiere CS3 to AE CS3 and all my transition (fade + wipes) are now solids and they don't work on timeline or on exports, but they still show in my sequence.
How can I make AE use those transition again so I don't have to go through all project and keyframe transitions.
Notice that I use Cineform and that those transition are Cineform's one; hope that doesn't cause the problem since AE uses CF too.
Thnak you for your time and interest in my problem.fredou_79 wrote:
Notice that I use Cineform and that those transition are Cineform's one; hope that doesn't cause the problem since AE uses CF too.
Exactly the problem. AE is only to able to translate a few transitions, which include the normal cross-disolve, linear wipe, dip-to-color and a few others, but since those routines are hard-coded in the Premiere Pro Importer, they have no way f doing the same for third-party products. So more or less you will have to rebuild your stuff, either by using the proper transitions in PPro or in AE.
Mylenium -
After recently purchasing a mac i decided to upload my photos from my iPhone to iPhoto. I accidentally disconnected the charger and now whenever i click 'import photos' it tells me that iPhoto is 'importing photos to library' which i can tell you it is not. because the phone is not connected and it has been doing it for days now.i tried to force quit and it hasn't work. It won't let me shut the computer down now either as it thinks it is currently importing something so i have to wait for the computers battery to die which is ridiculous. Becoming increasingly frustrated with this problem and not sure where else to turn. Please help. Thanks, Neil.
If the ➙ Force Quit method won't let you shutdown iPhoto try this command in the Terminal:
killall iPhoto
followed by the Return or Enter key
It might take more than one go for it to take.
Failing that close all other applications and hold the power button down until the computer shuts down. Reboot and try iPhoto again. -
Truncated songs when imported from a CD
I'm having a problem when importing CDs into iTunes - Very often the first and sometimes second track are truncated to about 30 secs. The rest of the CD seems to import OK.... Any ideas what the problem could be ?
tim1000sussex wrote:
Hi,
I am importing CDs into iTunes on my PC using MP3 encoder (High quality 160 kbps) and some of the end of the tracks are missing. Is there something I need to change on my settings?
Message was edited by: tim1000sussex
That is a bug and it has reported here quite a few times. Often it will affect only the last track of the CD.
A workaround is to import that track in WAV format, and after you have verified that the track is complete, use iTunes to convert it to MP3/AAC. -
Need Help ! Can't see songs after importing from CD, but shows in explorer
I import CD and songs show up in library in explorer, but won't show in itunes or on ipod. I reinstalled intunes over and over with new version and even original cd.
Can you give me a little more information as to what you did?
-
I am not the original purchaser of Macbook Pro with Snow Leopard and upgraded to OS X 10.8.2, however I need a CD copy of Mountain Lion.
Where can I download and burn the OS.
ThanksYou can't. You should have saved the original installer you downloaded before installing. After installation it automaticallly deletes itself.
You can give this a try:
Unfortunately, the link for getting specific hardware versions has disappeared. So basically:
Get yourself a spare hard drive freshly erased or with a freshly erased partition of around 8 GBs or more.
Boot to your Recovery HD. Select Reinstall Lion from the main menu.
From the beginning screen select your spare partition/drive as the target destination then begin the download.
At the end of the download you will observe an Install button for you to click. Now this is important - as soon as that gadget appears you must abort the installation process. There are only two reliable ways to do this quickly: a. yank the cable for the drive from the computer; b. pull the power on the computer - shut it down quickly.
This will result in your finding a folder on the drive that contains InstallESD.dmg that you can now use to create a bootable USB flash drive installer based on the special build for your model. Use it until the next public release of Lion appears or you move on to Mountain Lion.
If you do not stop the download process immediately upon its completion you will end up with an installer that always boots to a non-functioning installation progress window instead of the normal main menu.
Make Your Own Mountain/Lion Installer
1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
Double-click on the InstallESD.dmg file to mount it on your Desktop.
Open Disk Utility.
Select the USB flash drive from the left side list.
Click on the Restore tab in the DU main window.
Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
Drag the mounted disc icon from the Desktop into the Source entry field.
Double-check you got it right, then click on the Restore button.
When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
Note: The term Mountain/Lion used above means Lion or Mountain Lion.
As an alternative to the above you can try using Lion DiskMaker 2.0 that automates the process. -
Importing into mac from hard disk - impossible to maintain order
ok, have several music lists - 7, each for the day of the week, and import them into Itunes.
In preferences, I have under advanced unchecked
- keep iTunes media folder organized
- copy files to iTunes Media Folder when adding to library
so everything stays on the external hard disk.
now, all songs are marked
in monday: m0001 m0002
on tuesday tu0001 tu0002
etc.
no problem at all for monday, tuesday - thursday, friday, saturday and sunday.
on wednesday - a complete mix up with some songs that have nothing to do with the list.
there are even songs there that are NOT on the original list!
I have deleted everything from iTunes, loaded again and .... same problem
importing I do by dragging the mp3 files (songs) from a hard disk into iTunes
again, all days work perfectly BUT wednesday.strangely enough, the number of songs (342) is exactly the same in the original list and on the iTunes list
-
Can you fix your help project (via coding) after importing a topic from an output file by mistake?
Yes - I admit it - I imported html topic files from an output folder of another RH project into the help project I am currently working on (the source files were lost and I needed to bring over a lot of legacy content in a hurry). However, I completely forget that the RH output html file contains unique Java scripting that is used to render the topic properly in a browser, but that same Java Script causes havoc when you open it up in as a source file in another RH Project. Needless to say, it has caused numerous weird things when I went to publish and view my files (but, surprisingly, you don’t really see or notice them in the RH Design WYSIWYG view or preview mode).
The bad news is that it took about 2 weeks for me to notice the issue (the help output is viewed on a special console running Linux with a QT browser that I only view occasionally). The good news is that is that I figured out what the problem was (that took some hours) and I can restore my help project back to a time before I did the "naughty deed".
I am now at a crossroads - do I:
Try to re-enter all of my content from the last two weeks? (Actually, to avoid repeating the same mistake twice, I will need to re-enter the text manually and NOT cut and paste from the RH output files!)
Or locate and find the offending HTML coding in my topic files (if that is even possible)? Has anybody documented what the RH output file JavaScript code injects into your files, and what files they affect?OK - here is the documentation of this weird issue (hopefully, you can read the htlm code in the screen images):
1. In this topic, I cut and pasted some text into the table you see at the bottom of the screen. I had to reapply the “TableBody” style to this text. After doing this, I moved my cursor to the “Keyboard" text on top. Notice that it is displaying the "TABLEBODY" style, although visually, it is displaying the correct style on screen (“Heading 1”).
2. In HTML view, notice the addition of the class= “TableBody”> code for this “Keyboard” text.
3. I then reselected Heading 1 for this “Keyboard” text.
4. Notice that the class= “TableBody”> code is now removed for this “Keyboard” text and has just the proper <h1> tagged assigned. -
Can't play songs after importing
I bought a new computer and imported all my music files from a thumb drive. Now when I try to play songs in ITunes I get an error message saying the song can not be played because the original file cannot be located.
You don't need the thumb drive connected to do the test, all you want to know is where itunes thinks the music files are located.
The tracks should play if the thumb drive is plugged in and has the same drive letter as it had when you added the tracks.
Presumably M: the thumb drive?
Now to confirm what has happened, go to Preferences on the edit menu.
If you don 't see the iTunes menu, press CTRL B to get it.
Look on the advanced tab.
Is "copy to iTunes music folder when adding to library" checked?
If it is not, this confirms the problem. -
GRRR - MuVo won't play songs after it's removed from USB P
:robotmad:Just bought a Nomad MuVo for a X-mas gift for my daughter, and I can't get the songs to play after I've removed the player from the USB Port. WMA songs seem to download to player OK, as I can play them from the MuVo through the jukebox software that was included with the MuVo. However, as soon as I take it out of the computer and turn it on, the light quickly goes from green to red as if there are no files there. Windows Explorer shows that they ARE. I always use the "safely remove hardware" function. I've tried to solve this by:
Reformatting the player</LI>
Removing the "settings.dat" file from the player</LI>
Downloading/installing latest firmware</LI>
Downloading/installing latest driver</LI>
None of the above has changed anything.
If it matters, the WMA files I'm trying to download were purchased from WalMart online.
<PLEASE HELP!Jason - I could kiss you!!! The Windows Media software worked!!!!
Call yourself Santa because the only thing my daughter wanted for X-mas was an MP3 player and gift cards for music to download online. The MuVo was the 2nd player I bought -first one was an unnamed cool-looking (but so far entirely useless and supportless) one from EBay. I've been wasting endless hours since November trying to get one or the other to work with downloaded DRM-protected WMA files. I don't know what I would've done without you!!!
However, I'm irritated that the Creative website inferred that if I downloaded the latest software/firmware, it would allow me to use DRM songs with their software. I would think that a ton of people are going to have this issue, and the Creative info tells you that you have to use the enclosed software. This issue should really be prominently posted in the troubleshooting section.
Maybe you are looking for
-
How do I make a page print in Landscape?
Greetings, I have a page which contains a form layout just for printing. I need to print it landscape. How do I do so? We're on Application Express 4.1.1.00.23 Thanks, Tony
-
Head phone volume controls are not working after updating to ios 6.1 y?
head phone volume controls are not working after updating to ios 6.1 y?
-
Adobe PrPro has stopped working
Asus p8h67m-pro core I5-2500k three std hard drive 250,250 320GB one 60GB SSD that has been alloted some page space running win7 64bit sp1 I had PP cd5.552 loaded and working fine once had to reload OS a number of times till I arrived at the memory f
-
Copy assignment structure to a new document
I lay out a biweekly newspaper and we keep a consistent layout from one week to the next. After each issue, I duplicate and rename the original file, delete all the content and then input the new content from Word documents (my workflow does not cur
-
can i get SnipSnap Coupon app 1.3 or 1.4 version. i don't need the latest version . if anyone has please kindly provide the .ipa file.?