Trunk card and DSP module for AS5350XM

I have bought Cisco AS5350XM Voice (PVDM2) High-Density (AS535XM-2T1-V-HC).
There are 2T1 port and two 64-channel DSP modules
My application server uses only G.711(64k) via LAN to talk to AS5350 for inbound IVR calls. If 2T1 is used to full capacity, there should be 82 DSP channels available.
Could I just buy a trunk card (AS535-DFC-4CT1) and use only 3T1 without having to add extra DSP modules?

Try this link for more information on cards
http://www.cisco.com/en/US/products/hw/univgate/ps501/products_white_paper0900aecd801f92c1.shtml

Similar Messages

DSP Module For LabVIEW 2011

Dears,
I need the DSP Module For LabVIEW 2011, is it Available? and where can I Download it ?
Thanks
Ahmed Abdulbaky

Hi Ahmed,
I posted this in error. I did not see that Ryan had already answered this.
Ryan is correct. The latest version is 8.6
You can download the latest version of the DSP module from ni.com/downloads. The exact URL is shown below:
http://search.ni.com/nisearch/app/main/p/bot/no/ap/tech/lang/en/pg/1/sn/ssnavdl/q/dsp/#
I hope this information helps.
Regards,
James D.
Applications Engineer
National Instruments

After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA

After installing Mountain Lion on my 17" MBP G-RAID mini connected via Tempo SATA Edge ExpressCard34 is no longer recognized. I restored icon and access by removing 34 card and substituting FW800 for eSATA. Any fix for the higher speed connection? TIA

Looks like the Silicon Image drivers were moved to the incompatible software folder during install/upgrade.
Downloaded latest drivers, errored out of install claiming that the drivers were from an unknown author!!!
Emailed their tech support this evening describing problem.

TS2446 Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card an

Hello!After I've done my last softwere update I couldn't buy or get any free apps on the apps store.There was an error on my paymant method.I reintrodius my data for the credit card and again error for my credit card.I've changed the credit card and the same.why???????

I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
What happened is that my garage band looks like it will open then it shuts down.
I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
I really hope I don't have to erase it.
It'll say it's ,lading my songs then it shuts down .
If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
Thank you
Simachyahi

Wild card and blank search for INBOX SEARCH

Hi All,
we are working on SAP CRM 2007. we have an requirement where we want to implement "Wild card and blank search for INBOX SEARCH page". please provide me some pointers to proceed. TIA
rgds,
@run

Hi Ajith,
István is correct, wild card '*' is readily available for any Item name, BP name or other searchable fields.
Thanks,
Gordon

Video Card and PSU upgrade for HP pavilion p6310y?

Hello,
I am a mild gamer and I would like to upgrade my video card so I could play games like minecraft and maplestory without my frame rate dropping every 5-10 min. When this happens it sounds like the fan in my computer is working really hard and the game is almost unplayable. I also play a few games from steam such as Gmod and Borderlands, however the games that seem less graphic intensive give me more problems.
Should I and am I able to upgrade the video card and psu for this HP pavilion p6310y? or possibly get a better card for these game without upgrading psu?
Processor is Quade core AMD Athlon II X4 630 / 2.8 GHz
6gigs of ram
1 tb harddrive
NVIDIA GeForce 9100
300 watt power supply
Windows 7 64 bit
Any help would be much appreciated!

Hi,
Yuo might try updating the video driver from the NVIDIA web site.
Your PC has a 300 watt power supply. If you don't need DirectX 11 (used for better detail in newer games), then the NVIDIA GT 240 1GB or 512 MB DDR5 is about tops for a 300 watt power supply.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Business scenarios on SD and MM modules for generic datasources and enhance

Hi,
Can anybody send some documents on SD and MM module on generic datasource and on enhancements.Pl send it to my MailID:[email protected]
Thanks,
Chinna

Hi,
MM Process flow:
The typical procurement cycle for a service or material consists of the following phases:
1. Determination of Requirements
Materials requirements are identified either in the user departments or via materials planning and control. (This can cover both MRP proper and the demand-based approach to inventory control. The regular checking of stock levels of materials defined by master records, use of the order-point method, and forecasting on the basis of past usage are important aspects of the latter.) You can enter purchase requisitions yourself, or they can be generated automatically by the materials planning and control system.
2. Source Determination
The Purchasing component helps you identify potential sources of supply based on past orders and existing longer-term purchase agreements. This speeds the process of creating requests for quotation (RFQs), which can be sent to vendors electronically via SAP EDI, if desired.
3. Vendor Selection and Comparison of Quotations
The system is capable of simulating pricing scenarios, allowing you to compare a number of different quotations. Rejection letters can be sent automatically.
4. Purchase Order Processing
The Purchasing system adopts information from the requisition and the quotation to help you create a purchase order. As with purchase requisitions, you can generate Pos yourself or have the system generate them automatically. Vendor scheduling agreements and contracts (in the SAP System, types of longer-term purchase agreement) are also supported.
5. Purchase Order Follow-Up
The system checks the reminder periods you have specified and - if necessary - automatically prints reminders or expediters at the predefined intervals. It also provides you with an up-to-date status of all purchase requisitions, quotations, and purchase orders.
6. Goods Receiving and Inventory Management
Goods Receiving personnel can confirm the receipt of goods simply by entering the Po number. By specifying permissible tolerances, buyers can limit over- and underdeliveries of ordered goods.
7. Invoice Verification
The system supports the checking and matching of invoices. The accounts payable clerk is notified of quantity and price variances because the system has access to PO and goods receipt data. This speeds the process of auditing and clearing invoices for payment.
Common Tables used by SAP MM:
Below are few important Common Tables used in Materials Management Modules:
EINA Purchasing Info Record- General Data
EINE Purchasing Info Record- Purchasing Organization Data
MAKT Material Descriptions
MARA General Material Data
MARC Plant Data for Material
MARD Storage Location Data for Material
MAST Material to BOM Link
MBEW Material Valuation
MKPF Header- Material Document
MSEG Document Segment- Material
MVER Material Consumption
MVKE Sales Data for materials
RKPF Document Header- Reservation
T023 Mat. groups
T024 Purchasing Groups
T156 Movement Type
T157H Help Texts for Movement Types
MOFF Lists what views have not been created
A501 Plant/Material
EBAN Purchase Requisition
EBKN Purchase Requisition Account Assignment
EKAB Release Documentation
EKBE History per Purchasing Document
EKET Scheduling Agreement Schedule Lines
EKKN Account Assignment in Purchasing Document
EKKO Purchasing Document Header
EKPO Purchasing Document Item
IKPF Header- Physical Inventory Document
ISEG Physical Inventory Document Items
LFA1 Vendor Master (General section)
LFB1 Vendor Master (Company Code)
NRIV Number range intervals
RESB Reservation/dependent requirements
T161T Texts for Purchasing Document Types
Transaction Codes:
RFQ to Vendor - ME41
Raising Quotation - ME47
Comparison of Price - ME49
Creation of PO - ME21N
Goods Receipt - MIGO
Invoice (Bill PAssing) - MIRO
Goods Issue - MB1A
Physical Inventory - MI01( Create doc)
MI04 (Enter Count)
MI07 (Post)
Also please check this links.
http://www.sapgenie.com/sapfunc/mm.htm
http://www.sap-basis-abap.com/sapmm.htm
SD Process Flow:
The sales documents you create are individual documents but they can also form part of a chain of inter-related documents. For example, you may record a customers telephone inquiry in the system. The customer next requests a quotation, which you then create by referring to the inquiry. The customer later places an order on the basis of the quotation and you create a sales order with reference to the quotation. You ship the goods and bill the customer. After delivery of the goods, the customer claims credit for some damaged goods and you create a free-of-charge delivery with reference to the sales order. The entire chain of documents the inquiry, the quotation, the sales order, the delivery, the invoice, and the subsequent delivery free of charge creates a document flow or history. The flow of data from one document into another reduces manual activity and makes problem resolution easier. Inquiry and quotation management in the Sales Information System help you to plan and control your sales.
Transaction Codes:
Inquiry - VA11/VA12/VA13
Quotation - VA21/VA22/VA23
Sales Order - VA01/VA02/VA03
Delivery - VL01N/VL02N/VL03N
Billing/Invoicing - VF01/VF02/VF03
Also please check this links.
http://www.sapgenie.com/sapfunc/sd.htm
http://www.sap-basis-abap.com/sapsd.htm
http://www.sapgenie.com/abap/tables_sd.htm
Production Planning:
For example, consider a pump manufacturing plant, based on the customer requirement, planning is done for future months ( we plan for a qty on particular
date). Pump is an assembly - were main component would be manufactured in the plant and others would be procured. As PP, we are concerned only in the inhouse
manufacturing but the final assembly (considering BOM) can be done only if the procured components are available. MRP helps in planning the shortage, on
particular date based on the planned date. Work center (ex. lathe) place the components are machined/assembled (were the operation is done). Sequence of
operation is routing (lead time scheduling data is got from routing). In the MRP Run,basic or lead time scheduling (need to know when to start/finish date)
is done. On creation of the production order, system checks for which BOM and routing to be picked up (if there are many routings or BOM for that particular
finished product). Availabilty checks for material,PRT and capacity needs to be done. on release of the order, confirmation of the order can be done (on
completion of the order or after manufacturing the quantities). GI and GR have to be done.PP flow ends here
step 1: creation of master data (Material master,BOM,Work center,Routing)
step 2: Planning - can be done by Planned independent requirement (MD61), Independent requirement (MD81).
we plan for a quantity, on which date (it would be finish date).
step 3: MD04 -stock/requirement lsit (plan made can be viewed in MD04)
step 4: MRP run - MD02, PIR is converted into Planned order
step 5:Planned order to be converted production order - CO40, CO41
step 6: production order to be released - CA02
step 7: confirm the production order (order confirmation-CO15 (after which GI and GR is done)
assign pts if helpful...

Mpls,vpls and ES20G module for 7600

hi all,
do i need a ES20G module on my 7600 in order to perform VPLS,6VPE mpls and so on...
is this module just a 'speeding' module for these fonctionnalities ?
(it is very expensive and the license too)
Can i implement these features without it ??
Does someone use vpls on 7600 without that module ?
Thanks for answer

Yes you can run VPLS without ES-20 using any WAN OSM or SIP-600 faing the core.
Although there would be cost difference in each module including ES-20G, but these modules have been designed with different objectives and requirements in mind. As each module provides you with either a certain media type density(ES-20G) or OSM , or the flexibility of media type usage etc (SIP-600).
So you can weigh the pros and cons with each module including the cost marked to the budget and take a call.
HTH-Cheers,
Swaroop

PRZNT and SUMME modules for indirect valuation

What are the different variants for SUMME and PRZNT modules? Please explain me the meaning of all of the variants of these modules.

o     TARIF: module uses pay scale data that it takes from the pay sacle groups and levels you entered in Basic pay.
     Variant A- valualtion is based on the pay scale group & level
     Variant B- valuation is based on the pay scale group/ level and specific wage type
     Variant C- valuation does not depend on pay scale level
     Variant D u2013 valuation does not depend on pay scale group or level
o     PRZNT:- calculates certain wage types as a percentage of other wage types. It is based on how you set up the base wage type valuation table T539J
     Variant B- we have to mention the base wage type ininfotype 8 on which the value of third wage type needs to be indirectly evaluated along with the %
     Variant D- the value of wage type to be valuated is calculated by multiplying the basis pay by the percentage specified for the wage type to be valuated.
     Variant I u2013 No need to maintain the base wage type in infotype 00008 on which the value of third wage type needs to indirectly valuated
o     SUMME:- calculates certain wage types as a percentage of other wage types. It is based on how you set up the base wage type valuation table T539J
     Same as the PRZNT only the difference is there is no need to maintain the percentage in the info type
o     ARBPL:- uses the object type and the position number entered in info type 0001 to calculate the wage type amount
o     Reduction Methods:- the values are as follows:
o     Blank or 1:- No reduction
o     2:- reduction using the capacity utilization level (%) stored in .0008.
o     3. Reduction based on relationship between individual std weekly working time and std weekly working time
o     4. Reduction based on relationship between individual hours per week taken from info type 0007 and the individual std weekly working time
o     5. Reduction based on relationship between individual std weekly working time minus and std weekly working time
o     Rounding type
o     A u2013 amount is rounded down
o     B u2013 amount is rounded UP/DOWN
o     C- amount is rounded UP

Gift card AND checking charged for same purchase?

I got a gift card and a $50 Credit showed in iTunes. I purchased an app for my new iPad 3 and later some in-app purchases for the same software, which seemed to come from the iTunes store too. Why does a charge show up in my checking as well? Aren't in-app purchases charged the same as any other iTunes buy? Is there any way to push using the gift card credit first?

Is this the first time that you've tried to download anything with the account ? If it is, then unless the instructions on this page are followed when creating an account : Create an iTunes Store, App Store, or iBooks Store account without a credit card or other payment method
then credit card details will need to be entered before the account can be used to download any item from the store. You should be able to remove card details after entering them.
Or if you are being prompted to review the account then you could see if this post by mountaingoatgirl lets you do so without needing to enter credit card details : https://discussions.apple.com/message/24303054#24303054

NI-WSN and WSN Module for LV2014

I am picking hardware for a new project and noticed, that NI-WSN is not supported by LabVIEW 2014. Further investigation showed that the newest version of WSN Moule Pioneer is only suported by LabVIEW 2013.
First question is if anyone has some info about the relase date for the new NI-WSN (LV2014 compatible version)? and WSN Module Pioneer.
The second question is if use of WSN for the new projects should be avoided due to no new drivers available and replaced with cRIO with Acess Point (configured as a bridge) to connecto to wireless.

Hi Mitja_G.,
You are right, there is no current support of WSN in LabVIEW 2014 nor LV 2014 SP1.
There are some plans to release in the future tbut there is no official release date.
My suggestion will be to contact NI Branch in your country and discuss what are the options.
Knowing more about the opportunity and your hardware configuration, it will help finding the best solution for you.
If you need contacts of your local NI Branch, please tell me your country and I can send you exact e-mail address and phone number.
Best regards,
IR

MP early 2008: Seeking advice on e-sata card and external enclosure for backup purposes

Hi everyone
I currently have my home folder on an internal 3TB drive which is SuperDuper'd every day to an identical internal drive.
I am running out of space and need to think of a longer-term solution. I will have to use several large drives - one drive for photos, one for iTunes library, one for documents etc. Each drive would be mirrored with SuperDuper to something like an IcyCUBE and connected through a PCIE e-sata card. I'm not considering any form of RAID solution.
Is Sonnet still the card manufacturer to go for - if so, is the E2P the card I need? Are there alternative cards and if so what should I look for (certain chipsets perhaps)?
Are there any known compatibility problems between certain cards and certain drive enclosures?
Is there a way to have only one cable between the computer and the enclosure or must each drive have its own connection?
Thanks very much in advance for any help with this.
Cheers
Philip

E2P is a low end two port card with limitation in bandwidth. Maybe you want 4-port card to give you more growth and expansion.
Green drives may or may not be ideal for your media storage needs. Cheaper. When floods drove up prive of drives in Sept 2011 they become more popular as Black 2TB price went to $270
Clone is one thing. Mirror is entirely different tech.
The issue are avoid those name brand WD and Seagate or LaCie enclosures.
Every new OS and Mac Pro has had some sort of change to drivers and such.
4TB drives should be part of your storage strategy.
Software RAID is fine with daily or as needed backups. Clone at least one, and TimeMachine for hourly. But never ever have only one backup set. One set should be off line and they would be rotated. For safety sake and avoid the all your eggs in one basket. Which is why yes internal is convenient but external drives and also drive enclosure that allows swapping.
A good USB3 + eSATA card is the most popular I think right now today.
And use Green 3-4TB for backup, and WD Black or enterprise for internal storage.

Cisco SAMI (Cisco Service and Application Module for IP) modules

Hi,
Could anyone confirm whether Cisco SAMI module on 7600 supports traditional ppp over vpdn wholesale broadband?
Currently we have setup on Cisco 7200's and we want to upgrade the hardware to 7600 to scale better, MWAM module supports the VPDN configuration but its now end of sale and replacement product is SAMI whose literature is quite confusing.
Thanks
Hitesh

Try this link for more information on cards
http://www.cisco.com/en/US/products/hw/univgate/ps501/products_white_paper0900aecd801f92c1.shtml

Family sharing (do we have to share the same credit card and sharing working for everyone?

I was wondering if family sharing was working for anyone else? I set it up and the way I believe you access another family members purchases is by going to your purchase history either in itunes or in the app store. From there you can pick your purchases or another family members purchases but when I do this I only see my purchases. Am I doing this wrong or is it not working.
Also is there a way we all don't have to use the same credit card?
Thank You,
Laura

Am I correct in my first post regarding how you are suppose to access someone else's purchases? it doesn't seem to be working for me I added the other person and see accepted and when I go to family share she is there but I can't find her purchases

When we go for Views and Function Modules for Generic Extraction

Hi Experts,
Can you please explain when we go for extracting the data using Views and when we got using Function Modules using Generic Extraction from R/3 system to BW with examples. And also can you explain when we go for delta for the above both scenarios.
Thanks for you help in advance
Rohith

Hi,
Scenario for Extarction using FM
Imagine the scenario where you need to extract data from
tables having no common field between them and thereby preventing you from creating a view on top of those tables..
Or simply consider tables that are highly unrelatd in terms of fields, but you have a requiremnt to extract data from them.
Also Refer.
create generic extractor based on 2 tables
Generic Extraction via Function Module
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
Steps.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
http://help.sap.com/saphelp_nw04/helpdata/en/86/1c8c3e94243446e10000000a114084/frameset.htm
Scenario for Extraction using View
If there are more number of tables and data in those tables can be represented using joins then we can use this type of extraction
For more info Refer these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
For GEneric Delta refer these links
[generic with delta;
[https://forums.sdn.sap.com/click.jspa?searchID=11388803&messageID=5164737]

Trunk card and DSP module for AS5350XM

Similar Messages

Maybe you are looking for