Trunking from a 2924xl to a 3550-24PWR
I need to seet up an access port or a trunk port on the 2924xl that will allow multiple vlans.
The following links should help get you started
how trunks work on 2900xl
http://www.cisco.com/en/US/products/hw/switches/ps637/products_configuration_guide_chapter09186a00800d9d3e.html#xtocid39
configuring a trunk 2900xl
http://www.cisco.com/en/US/tech/tk389/tk390/technologies_configuration_example09186a00800949fd.shtml
http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc6/scg/swvlan.htm
configuring trunks on 3550
http://www.cisco.com/en/US/products/hw/switches/ps646/products_configuration_guide_chapter09186a00800c9fd8.html#xtocid21
Similar Messages
-
Unable to place call on calls on hold - SIP Trunk from CUCM to CUBE and from CUBE to ISTP
Hi Cisco Community,
I have a SIP Trunk setup between the CUCM and CUBE and another SIP Dial Peers from the CUBE to the ITSP. All incoming/outgoing calls, DTMF-Relay works well except one thing which is the ability to hold the call.
On the SIP Trunk from the CUCM to the CUBE, I did not select “MTP” because when I do so, I am forced to select my preferred MTP codec which when selected G.729/G.729a, all my outgoing calls goes out using G.729r8. This codec works well for most of the calls until the ITSP replies back with G.729br8. When this condition occur, my call simply fails (this is very intermittent and only some random numbers).
That said, I have some issues with DTMF Relay when I select MTP on the SIP Trunk. DTMF Relay only works if the call is G.729r8 all the way from the CUCM to the ITSP. If the ITSP replies back with G.729br8, the call might established but will simply be “voice-only”.
The current setup is no MTP is selected and everything is working perfectly. I am happy with that until I place a call on hold, which when I do so, the call immediately terminate. Could you please help me understand why?
I have all media resources configured such as G.729r8 MTP, G.729br8 MTP, G.711u MTP, Transcoding with all codecs, etc. All MRG and MRGL are configured on all devices and SIP Trunks.
Below is an example of a call that is connected with the current setup:
Note:
IP: 10.18.81.2 (CUBE)
IP: 10.18.81.11 (CUCM SUB)
IP: 10.111.111.254 (ITSP SBC)
PM-HO-VG-01#
PM-HO-VG-01#
Nov 30 11:44:29.938: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72063a5aba5d
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM9.1
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 101 INVITE
Expires: 180
Allow-Events: presence, kpml
Supported: X-cisco-srtp-fallback,X-cisco-original-called
Call-Info: <sip:10.18.81.11:5060>;method="NOTIFY;Event=telephone-event;Duration=500"
Cisco-Guid: 1020645888-0000065536-0000124117-0189862410
Session-Expires: 1800
Contact: <sip:[email protected]:5060>
Max-Forwards: 70
Content-Length: 0
Nov 30 11:44:29.942: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72063a5aba5d
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Length: 0
Nov 30 11:44:29.946: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 1020645888-0000065536-0000124117-0189862410
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1417347869
Contact: <sip:[email protected]:5060>
Call-Info: <sip:10.18.81.2:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Max-Forwards: 69
Session-Expires: 1800
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 301
v=0
o=CiscoSystemsSIP-GW-UserAgent 7676 6958 IN IP4 10.18.81.2
s=SIP Call
c=I
PM-HO-VG-01#N IP4 10.18.81.2
t=0 0
m=audio 22256 RTP/AVP 18 0 8 101
c=IN IP4 10.18.81.2
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
Nov 30 11:44:29.950: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 101 INVITE
Timestamp: 1417347869
Nov 30 11:44:30.658: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 180 Session Progress
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 101 INVITE
Timestamp: 1417347869
Supported:
Contact: <sip:[email protected]:5060;transport=udp>
Session: Media
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
X-BroadWorks-Correlation-Info: bbf94839-a234-4237-95e6-a7037322f0f4
Content-Type: application/sdp
Content-Length: 355
v=0
o=BroadWorks 316169737 1 IN IP4 10.111.111.254
s=-
c=IN IP4 10.111.111.254
t=0 0
m=audio 20074 RTP/AVP 18 101 100
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:100 X-NSE/8000
a=fmtp:100 200-202
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
Nov 30 11:44:30.662: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 183 Session Progress
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72063a5aba5d
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: <sip:[email protected]:5060>
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 289
v=0
o=CiscoSystemsSIP-GW-UserAgent 7965 2747 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 10.18.81.2
t=0 0
m=audio 22350 RTP/AVP 18 101 19
c=IN IP4 10.18.81.2
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:19 CN/8000
a=ptime:20
Nov 30 11:44:31.226: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 180 Session Progress
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 101 INVITE
Timestamp: 1417347869
Supported:
Contact: <sip:[email protected]:5060;transport=udp>
Session: Media
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
X-BroadWorks-Correlation-Info: bbf9
PM-HO-VG-01#4839-a234-4237-95e6-a7037322f0f4
Content-Type: application/sdp
Content-Length: 355
v=0
o=BroadWorks 316169737 1 IN IP4 10.111.111.254
s=-
c=IN IP4 10.111.111.254
t=0 0
m=audio 20074 RTP/AVP 18 101 100
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:100 X-NSE/8000
a=fmtp:100 200-202
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
Nov 30 11:44:31.630: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC72218
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 101 INVITE
Timestamp: 1417347869
Supported:
Contact: <sip:[email protected]:5060;transport=udp>
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Accept: application/media_control+xml,application/sdp,application/xml
X-BroadWorks-Correlation-Info: bbf94839-a234-4237-95e6-a7037322f0f4
Content-Type: application/sdp
Content-Length: 355
v=0
o=BroadWorks 316169737 1 IN IP4 10.111.111.254
s=-
c=IN IP4 10.111.111.254
t=0 0
m=audio 20074 RTP/AVP 18 101 100
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:100 X-NSE/8000
a=fmtp:100 200-202
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
Nov 30 11:44:31.630: //64511/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D7B1458
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 27218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.111.111.254:5060
Destn SIP Resp Addr:Port : 10.111.111.254:5060
Destination Name : 10.111.111.254
Nov 30 11:44:31.630: //64511/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22256
Destn IP Address (Media): 10.111.111.254
Destn IP Port (Media): 20074
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:31.630: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC81D00
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
Nov 30 11:44:31.634: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72063a5aba5d
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
CSeq: 101 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: <sip:[email protected]:5060>
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Supported: timer
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 289
v=0
o=CiscoSystemsSIP-GW-UserAgent 7965 2747 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 10.18.81.2
t=0 0
m=audio 22350 RTP/AVP 18 101 19
c=IN IP4 10.18.81.2
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:19 CN/8000
a=ptime:20
Nov 30 11:44:31.726: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72075e3a02c1
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:29 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: presence, kpml
Content-Type: application/sdp
Content-Length: 236
v=0
o=CiscoSystemsCCM-SIP 9082578 1 IN IP4 10.18.81.11
s=SIP Call
c=IN IP4 10.18.80.40
b=TIAS:8000
b=AS:8
t=0 0
m=audio 21928 RTP/AVP 18 101
a=rtpmap:18 G729/8000
a=ptime:20
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
Nov 30 11:44:31.730: //64510/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D816D70
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 0218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.18.81.11:5060
Destn SIP Resp Addr:Port : 10.18.81.11:5060
Destination Name : 10.18.81.11
Nov 30 11:44:31.730: //64510/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22350
Destn IP Address (Media): 10.18.80.40
Destn IP Port (Media): 21928
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:31.730: //64510/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D816D70
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 0218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.18.81.11:5060
Destn SIP Resp Addr:Port : 10.18.81.11:5060
Destination Name : 10.18.81.11
PM-HO-VG-01#
Nov 30 11:44:31.730: //64510/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22350
Destn IP Address (Media): 10.18.80.40
Destn IP Port (Media): 21928
Orig Destn IP Address:Port (Media): [ - ]:0
PM-HO-VG-01#sh sip
PM-HO-VG-01#sh sip-ua call
PM-HO-VG-01#sh sip-ua calls
Total SIP call legs:2, User Agent Client:1, User Agent Server:1
SIP UAC CALL INFO
Call 1
SIP Call ID : [email protected]
State of the call : STATE_ACTIVE (7)
Substate of the call : SUBSTATE_NONE (0)
Calling Number : 27218091323
Called Number : 0862000000
Bit Flags : 0xC04018 0x10000100 0x0
CC Call ID : 64511
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : [10.111.111.254]:5060
Destn SIP Resp Addr:Port: [10.111.111.254]:5060
Destination Name : 10.111.111.254
Number of Media Streams : 1
Number of Active Streams: 1
RTP Fork Object : 0x0
Media Mode : flow-through
Media Stream 1
State of the stream : STREAM_ACTIVE
Stream Call ID : 64511
Stream Type : voice+dtmf (0)
Stream Media Addr Type : 1
Negotiated Codec : g729br8 (20 bytes)
Codec Payload Type : 18
Negotiated Dtmf-relay : rtp-nte
Dtmf-relay Payload Type : 101
QoS ID : -1
Local QoS Strength : BestEffort
Negotiated QoS Strength : BestEffort
Negotiated QoS Direction : None
Local QoS Status : None
Media Source IP Addr:Port: [10.18.81.2]:22256
Media Dest IP Addr:Port : [10.111.111.254]:20074
Options-Ping ENABLED:NO ACTIVE:NO
Number of SIP User Agent Client(UAC) calls: 1
SIP UAS CALL INFO
Call 1
SIP Call ID : [email protected]
State of the call : STATE_ACTIVE (7)
Substate of the call : SUBSTATE_NONE (0)
Calling Number : 0218091323
Called Number : 0862000000
Bit Flags : 0xC0401E 0x10000100 0x80004
CC Call ID : 64510
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : [10.18.81.11]:5060
Destn SIP Resp Addr:Port: [10.18.81.11]:5060
Destination Name : 10.18.81.11
Number of Media Streams : 1
Number of Active Streams: 1
RTP Fork Object : 0x0
Media Mode : flow-through
Media Stream 1
State of the stream : STREAM_ACTIVE
Stream Call ID : 64510
Stream Type : voice+dtmf (1)
Stream Media Addr Type : 1
Negotiated Codec : g729br8 (20 bytes)
Codec Payload Type : 18
Negotiated Dtmf-relay : rtp-nte
Dtmf-relay Payload Type : 101
QoS ID : -1
Local QoS Strength : BestEffort
Negotiated QoS Strength : BestEffort
Negotiated QoS Direction : None
Local QoS Status : None
Media Source IP Addr:Port: [10.18.81.2]:22350
Media Dest IP Addr:Port : [10.18.80.40]:21928
Options-Ping ENABLED:NO ACTIVE:NO
Number of SIP User Agent Server(UAS) calls: 1
PM-HO-VG-01#
PM-HO-VG-01#
PM-HO-VG-01#
As you can see, the call is connected and everything is working perfectly. When I press the hold button, here is what I get:
NOTE: I have # debug ccsip messages and #debug ccsip calls (running)
PM-HO-VG-01#
PM-HO-VG-01#
Nov 30 11:44:49.210: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720852ab8b92
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM9.1
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 102 INVITE
Max-Forwards: 70
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Contact: <sip:[email protected]:5060>
Content-Type: application/sdp
Content-Length: 244
v=0
o=CiscoSystemsCCM-SIP 9082578 2 IN IP4 10.18.81.11
s=SIP Call
c=IN IP4 0.0.0.0
b=TIAS:8000
b=AS:8
t=0 0
m=audio 21928 RTP/AVP 18 101
a=rtpmap:18 G729/8000
a=ptime:20
a=inactive
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
Nov 30 11:44:49.218: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720852ab8b92
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 102 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Length: 0
Nov 30 11:44:49.218: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC9241
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 1020645888-0000065536-0000124117-0189862410
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 102 INVITE
Max-Forwards: 70
Timestamp: 1417347889
Contact: <sip:[email protected]:5060>
Call-Info: <sip:10.18.81.2:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Length: 271
v=0
o=CiscoSystemsSIP-GW-UserAgent 7676 6959 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 0.0.0.0
t=0 0
m=audio 22256 RTP/AVP 18 101
c=IN IP4 0.0.0.0
a=inactive
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
Nov 30 11:44:49.278: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3EC9241
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 102 INVITE
Timestamp: 1417347889
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Supported:
Accept: application/media_control+xml,application/sdp,application/xml
Contact: <sip:[email protected]:5060;transport=udp>
X-BroadWorks-Correlation-Info: bbf94839-a234-4237-95e6-a7037322f0f4
Content-Type: application/sdp
Content-Length: 360
v=0
o=BroadWorks 316169737 2 IN IP4 10.111.111.254
s=-
c=IN IP4 0.0.0.0
t=0 0
m=audio 20074 RTP/AVP 18 101 100
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:100 X-NSE/8000
a=fmtp:100 200-202
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
a=inactive
Nov 30 11:44:49.278: //64511/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D7B1458
State of The Call : STATE_ACTIVE
TCP Sockets Used : NO
Calling Number : 27218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.111.111.254:5060
Destn SIP Resp Addr:Port : 10.111.111.254:5060
Destination Name : 10.111.111.254
Nov 30 11:44:49.278: //64511/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22256
Destn IP Address (Media): 0.0.0.0
Destn IP Port (Media): 20074
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:49.282: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECA2633
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 102 ACK
Allow-Events: telephone-event
Content-Length: 0
Nov 30 11:44:49.282: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720852ab8b92
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 102 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: <sip:[email protected]:5060>
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Supported: timer
Content-Type: application/sdp
Content-Length: 271
v=0
o=CiscoSystemsSIP-GW-UserAgent 7965 2748 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 0.0.0.0
t=0 0
m=audio 22350 RTP/AVP 18 101
c=IN IP4 0.0.0.0
a=inactive
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:20
Nov 30 11:44:49.282: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e72094953dfea
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 102 ACK
Allow-Events: presence
Content-Length: 0
Nov 30 11:44:49.290: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720a6918040f
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces
Min-SE: 1800
User-Agent: Cisco-CUCM9.1
Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY
CSeq: 103 INVITE
Max-Forwards: 70
Expires: 180
Allow-Events: presence
Supported: X-cisco-srtp-fallback
Supported: Geolocation
Contact: <sip:[email protected]:5060>
Content-Length: 0
Nov 30 11:44:49.294: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720a6918040f
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 103 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Content-Length: 0
Nov 30 11:44:49.294: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECB16F3
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Supported: timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 1020645888-0000065536-0000124117-0189862410
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 103 INVITE
Max-Forwards: 70
Timestamp: 1417347889
Contact: <sip:[email protected]:5060>
Expires: 180
Allow-Events: telephone-event
Content-Length: 0
Nov 30 11:44:49.338: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECB16F3
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
CSeq: 103 INVITE
Timestamp: 1417347889
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Supported:
Accept: application/media_control+xml,application/sdp,application/xml
Contact: <sip:[email protected]:5060;transport=udp>
Content-Type: application/sdp
Content-Length: 306
v=0
o=BroadWorks 316169737 3 IN IP4 10.111.111.254
s=-
c=IN IP4 10.111.111.254
t=0 0
m=audio 20074 RTP/AVP 18 101
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=X-sqn:0
a=X-cap: 1 audio RTP/AVP 100
a=X-cpar: a=rtpmap:100 X-NSE/8000
a=X-cpar: a=fmtp:100 200-202
a=X-cap: 2 image udptl t38
Nov 30 11:44:49.342: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 2
PM-HO-VG-01#00 OK
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720a6918040f
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 103 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: <sip:[email protected]:5060>
Supported: replaces
Supported: sdp-anat
Server: Cisco-SIPGateway/IOS-15.2.4.M5
Supported: timer
Content-Type: application/sdp
Content-Length: 289
v=0
o=CiscoSystemsSIP-GW-UserAgent 7965 2749 IN IP4 10.18.81.2
s=SIP Call
c=IN IP4 10.18.81.2
t=0 0
m=audio 22350 RTP/AVP 18 101 19
c=IN IP4 10.18.81.2
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=rtpmap:19 CN/8000
a=ptime:20
Nov 30 11:44:49.350: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.11:5060;branch=z9hG4bK2e720b594cd517
From: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
To: <sip:[email protected]>;tag=3C365010-1E42
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 103 ACK
Allow-Events: presence
Content-Type: application/sdp
Content-Length: 213
v=0
o=CiscoSystemsCCM-SIP 9082578 3 IN IP4 10.18.81.11
s=SIP Call
c=IN IP4 10.18.81.10
t=0 0
m=audio 4000 RTP/AVP 18
a=X-cisco-media:umoh
a=rtpmap:18 G729/8000
a=ptime:20
a=fmtp:18 annexb=no
a=sendonly
Nov 30 11:44:49.354: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
BYE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECC55
From: <sip:[email protected]>;tag=3C365010-1E42
To: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Max-Forwards: 70
Timestamp: 1417347889
CSeq: 101 BYE
Reason: Q.850;cause=86
P-RTP-Stat: PS=874,OS=17480,PR=872,OR=17440,PL=0,JI=0,LA=0,DU=17
Content-Length: 0
Nov 30 11:44:49.354: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Sent:
BYE sip:[email protected]:5060;transport=udp SIP/2.0
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECD1ECD
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
User-Agent: Cisco-SIPGateway/IOS-15.2.4.M5
Max-Forwards: 70
Timestamp: 1417347889
CSeq: 104 BYE
Reason: Q.850;cause=65
P-RTP-Stat: PS=872,OS=17440,PR=952,OR=19040,PL=0,JI=0,LA=0,DU=17
Content-Length: 0
Nov 30 11:44:49.374: //64511/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 Race Condition
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECD1ECD
From: "Bianca Africa" <sip:[email protected]>;tag=3C364D44-9E2
To: <sip:[email protected]>;tag=71913148-1417348035284
Call-ID: [email protected]
Timestamp: 1417347889
CSeq: 104 BYE
Content-Length: 0
Nov 30 11:44:49.374: //64511/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D7B1458
State of The Call : STATE_DEAD
TCP Sockets Used : NO
Calling Number : 27218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.111.111.254:5060
Destn SIP Resp Addr:Port : 10.111.111.254:5060
Destination Name : 10.111.111.254
Nov 30 11:44:49.374: //64511/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22256
Destn IP Address (Media): 10.111.111.254
Destn IP Port (Media): 20074
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:49.374: //64511/3CD5D2000001/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 65
Disconnect Cause (SIP) : 200
Nov 30 11:44:49.406: //64510/3CD5D2000001/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 10.18.81.2:5060;branch=z9hG4bK3ECC55
From: <sip:[email protected]>;tag=3C365010-1E42
To: "Bianca Africa" <sip:[email protected]>;tag=9082578~cdf4c5a6-dd2b-4c71-bca0-b262ad997720-44517224
Date: Sun, 30 Nov 2014 11:44:49 GMT
Call-ID: [email protected]
CSeq: 101 BYE
Content-Length: 0
Nov 30 11:44:49.406: //64510/3CD5D2000001/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x0x3D816D70
State of The Call : STATE_DEAD
TCP Sockets Used : NO
Calling Number : 0218091323
Called Number : 0862000000
Source IP Address (Sig ): 10.18.81.2
Destn SIP Req Addr:Port : 10.18.81.11:5060
Destn SIP Resp Addr:Port : 10.18.81.11:5060
Destination Name : 10.18.81.11
Nov 30 11:44:49.406: //64510/3CD5D2000001/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g729br8
Negotiated Codec Bytes : 20
Nego. Codec payload : 18 (tx), 18 (rx)
Negotiated Dtmf-relay : 6
Dtmf-relay Payload : 101 (tx), 101 (rx)
Source IP Address (Media): 10.18.81.2
Source IP Port (Media): 22350
Destn IP Address (Media): 0.0.0.0
Destn IP Port (Media): 21928
Orig Destn IP Address:Port (Media): [ - ]:0
Nov 30 11:44:49.406: //64510/3CD5D2000001/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 86
Disconnect Cause (SIP) : 200
PM-HO-VG-01#Hi Manish,
Again, excellent feedback. Much appreciated.
I will try the commands suggested above and see if I can get DTMF to work correctly while interworking H.323 and SIP.
But my ultimate goal is to have SIP all way from the CUCM to the CUBE and from the CUBE to the ITSP.
If I enable SIP Early Offer with MTP on the CUCM going to the CUBE, all SIP Invite sent from the CUCM to the CUBE uses G.729r8 as the codec and once the call is established using G.729r8 should the ITSP reply with that codec, the call succeed and I am able to see an active MTP session using G.729 when I issue the command # show sccp connections.
One thing that I saw is that my ITSP love so much sending G.729br8 most of the times, so even if using SIP EO with MTP on the SIP Trunk to the CUBE, when I sent my INVITE out from the CUCM to the CUBE using G.729r8, specially on call center numbers such as 0800 numbers, you will see that the call established but the codec being negotiated is G.729br8 which is voice only (missing DTMF).
I will be doing some intensive test again later on this week and will send the logs.
Here is my question to both of you:
Which is the best way of having a proper SIP to SIP setup all the way that will not pose any problem?
Do I have to enable Early Offer on the SIP Profile used by the CUBE SIP Trunk or should I use the normal Standard SIP Profile? Do I need to enable MTP on my CUBE SIP Trunk or not?
From the CUBE point of view, I have a voice class codec that support G.729r8 or G.729br8 and the DTMF Relay method supported by the ITSP is RFC 2833.
I will send more logs for each scenario. I think that we are getting close to the resolution of this problem.
Thanks again for your support fellows. -
Remove trunking from a port in catos?
All,
Simple question: I want to remove all trunking from a port on a switch running catos. Clear Trunk seemed the obvious option, though it seems to just remove the vlans that are allowed to pass over the trunk port. Set Trunk mod/port Off doesn't do the trick either. Any thoughts?
thanks!Hi Chris,
"set trunk x/y off" is the correct syntax. When you try that, what happens?
HTH,
Bobby -
Route Map Policy on SVI - Trunk from ESX
Hi,
I have a question regarding the following configuration.
A route map matches traffic from a particular subnet, say on VLAN 10 (using an ACL).
A route map policy is applied on this SVI (int vlan 10)
A server on this subnet is running on ESX which is connected to the switch on a trunk port.
The ESX host tags all frames from this server as VLAN 10.
In this scenario, should the route map pick up the traffic from this server? I don't see why not, but in my testing it doesn't seem to be working :)
Thanks for any help.Hi Alex,
It's a 3750x (stack) with 12.2(55)SE5.
I've already changed the SDM template to routing and rebooted the switch.
I don't think the route map is working at all actually :) See config below, let me know if you can spot anything obvious but the networks on the ACL are definitely correct.
Thanks again.
Extended IP access list UPLINK2
10 permit ip 192.168.1.0 0.0.0.255 any
20 permit ip 192.168.4.0 0.0.1.255 any (305 matches)
route-map ROUTE1 permit 10
match ip address UPLINK2
set ip next-hop 10.1.1.253
interface Vlan10
ip address 192.168.5.254 255.255.254.0
ip policy route-map ROUTE1
end -
Please provide me with a simple example for creating a trunk from a 6506 to a 3750
An simple config example would be perfect
Here goes the configuration
3560 – example
Switch(config)#int fa0/2
Switch(config-if)#switchport
Switch(config-if)#switchport trunk encapsulation ?
dot1q Interface uses only 802.1q trunking encapsulation when trunking
Switch(config-if)#switchport trunk encapsulation dot1q
Switch(config-if)#switchport trunk native vlan ?
<1-1005> VLAN ID of the native VLAN when this port is in trunking mode
Switch(config-if)#switchport trunk native vlan 3
Switch(config-if)#switchport trunk allowed vlan ?
WORD VLAN IDs of the allowed VLANs when this port is in trunking mode
add add VLANs to the current list
all all VLANs
except all VLANs except the following
none no VLANs
remove remove VLANs from the current list
Switch(config-if)#switchport trunk allowed vlan 1 – 5 , 23 , 34
Switch(config-if)#switchport mode ?
access Set trunking mode to ACCESS unconditionally
dynamic Set trunking mode to dynamically negotiate access or trunk mode
trunk Set trunking mode to TRUNK unconditionally
Switch(config-if)#switchport mode trunk
Ok so now let’s confirm the port by using the show interface trunk command….
sh int trunk
Port Mode Encapsulation Status Native vlan
Fa0/2 on 802.1q trunking 3
Port Vlans allowed on trunk
Fa0/2 1-1005 -
Dot1q trunk from single switch to multiple switches
Hi,
Hope you can help please !
I have a single switch with 6 vlans and one trunk port at the main site This has to connect to a 3 separate locations each with its own switch with a trunked port via a microwave network.
I have run it in packet tracer using a hub as the microwave network. It works fine in that, I just want to check it would 'actually' work or could it cause problems ?
Diagram from PT below with 3 vlans just for clarification.First of all 'This is not a school related work' Leo Laohoo. There is no conspiracy here, calm yourself down.
We are loosing quite a few E1 circuits and they are being replaced with only a few ethernet, so we need to conserve them.
It is indeed a L2 network. The VLANs don't need to communicate with each other and will terminate into a firewall. I used the PC's on the left as an interface just.
I was concerned about having one trunk port connect to 3 other switches. I wasn't sure how they would react as I've ever only used trunks point to point.
Hence why I used the hub in PT to break a single trunk into 3. I just wasn't sure how the switches would react to this.
Thanks !
Mark -
Bearer trunks from AS5350 to PGW
Hi, I have a PGW2200 and as5350 connected to siwtch(SS7) and PBX(ISDN PRI Q.931). I have configured SS7 signaling link termination from iSLT of 5350 to PGW2200 and ISDN PRI termination in 5350. Now I have no idea how to configure remaining voice timeslots of SS7 link, and how convert between SS7 and PRI beacuse of my PGW2200 is in nailed mode.
Could anyone help?Start with the planning worksheets:
http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9plnprv.htm
http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9appb.htm
And be sure to have a good read of the documentation:
http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/index.htm
Here is the section on adding nailed trunks:
http://www.cisco.com/univercd/cc/td/doc/product/access/sc/rel9/prvgde/r9mmlchg.htm#wp1021012
Hope this helps.... -
VLAN trunk from switch to router
We have a 2691 cisco router and a Linksys (cisco) 24 port switch.
Each E port is set with a different untagged VLAN ID grouped to G1 uplink port and is tagged
The G1 port then is trunked and is tagged to native VLan 1
One of the router ethernet ports is configued as
interface FastEthernet0/0
description $ETH-LAN$
no ip address
ip flow ingress
duplex auto
speed auto
no cdp enable
interface FastEthernet0/0.1
description $ETH-LAN$
encapsulation dot1Q 1 native
ip address 216.110.213.1 255.255.255.0
ip flow ingress
no snmp trap link-status
no cdp enable
Is this correct ?
Problem is all VLAN E ports on switch cannot get past the router.
Some E ports not with VLAN then default to VLAN 1 and they can function past the router.
The config of the switch was verified with Linksys as being correct which leaves a router config issue
So in short the switch would have 24 VLANs untagged going through trunk which is tagged ending up hitting router and then out WAN ports.
Thanks for any help for cisco and linksys have been no help solving why servers on switch with vlan cannot see past router
JRIs this correct ?
A: The configuration above says that vlan 1 is native vlan, which means the router is expecting a "raw" packet to belong to vlan 1. "raw" packet menas it does not have any vlan id, I do not want to use "tag" coz "tag" might mean something else to Linksys. So, if it's "raw" as in if a PC transmit a packet, it will have no vlan id field.
Problem is all VLAN E ports on switch cannot get past the router.
Some E ports not with VLAN then default to VLAN 1 and they can function past the router.
A: If you mean, they can ping the 216.110.213.1 and beyond 216.110.213.0/24 then that would be expected.
The ports that belongs to other vlans will need a default gateway of their own, they cannot use the vlan 1 gateway because they are in different subnet. from the cofnig above, you only have sub-interface for vlan 1, do you have sub-interface for other vlans? If not, you need it.
The config of the switch was verified with Linksys as being correct which leaves a router config issue
So in short the switch would have 24 VLANs untagged going through trunk which is tagged ending up hitting router and then out WAN ports.
>> This goes back to above, native vlan on cisco router will be the only vlan the router will expect with no vlan id, otherwise, everything the router rx with no vlan id or dot1q encapsulation will be assumed that it belongs to vlan 1. do you have other sub-interfaces on the 2691 for the other 24 vlans?
Please rate all posts. -
VLAN trunking from Cisco Catalyst 3750 to Cisco SF300-48P issue and related
Hello expert,
I'm having difficulties to configure VLAN trunking between Cisco Catalyst 3750 switch with Cisco SF300-48P switch and my workstation unable to get any DHCP IP from our DHCP server via Cisco SF300-48P switch. Below is the snippet of configuration on both switches:
[Cisco Catalyst 3750 Switch]
interface GigabitEthernet1/0/45
description NCC-CC-1stFlr
no switchport trunk encapsulation dot1q
no switchport trunk allowed vlan 101-103
spanning-tree portfast
[Cisco SF300-48P Switch]
interface fastethernet48
spanning-tree link-type point-to-point
switchport trunk allowed vlan add 101-103
macro description switch
!next command is internal.
macro auto smartport dynamic_type switch
interface fastethernet29
switchport mode general
switchport general allowed vlan add 103 tagged
switchport general pvid 103
Are these are correct? Kindly advice!
Thank you very much!
Regards,
AlexHi Alex,
for the trunk port on Catalyst on port GE 1/0/45, we need to enable the trunk and for on encapsulation dot1q because this catalyst model is ISL capable also and the SF300 working only with Dot1q Encapsultion
The configuration on catalyst should :
#config terminal
#interface Gi 1/0/45
# switchport encapsulation
#switchport trunk encapsulation dot1q
#switchport mode trunk
#switchport trunk allowed vlan 101-103
#spanning-tree portfast
For SF300 the port trunk it looks fine but for the port where the PC should receive an IP address
#interface fastethernet29
#switchport mode access
#switchport ccess vlan 103
Please let me know after this configuration
Thanks
Mehdi
Please rate or mark as answered to help other Cisco Customers -
Unable to switch to trunk from branch checked out with CVS
Help!
We've run into a can't get there from here issue of not being able to switch back to the trunk when we've checked out a branch from CVS.
Using JDeveloper Studio Edition Version 11.1.1.1.0
Scenario:
Working on maintained in CVS.
Create Branch on code B1. (Versioning -> Branch, Branch Name = "B1", Source = "Trunk")
Now we can't get back to the trunk. When you select switch branch it only shows HEAD. Select that and you end up on some IDE generated tag called "HEAD", where you can't add files or check in changes.
How can you get back to the trunk?
rodger...Are you aware that "always view this page in IE" isn't a standard feature in Firefox? It's a feature of a Firefox extension, which is why you can't find it on a Firefox help page.
Check the download page for that particular extension to find out how to change that preference, or tell us which extension that is and we'll look for a FAQ page for that extension. -
Global SIP trunking from single provider
Our large global organisation is deploying on-premise Lync EV across 200+ sites globally.
We want to minimise the number of suppliers we use in this project and use SIP trunking where possible.
Are there any global telcos that would be able to offer me SIP trunking, with global points of presence on their network, and also 'full' SIP services for most countries.
By full SIP services I mean, competitive pricing (compared to local Telco), emergency number dialling, other special numbers, and full number portability
I have found some of our existing SIP providers can provide services in other countries, but they are not very good at it, and it is overpriced and they don't really know what they are doing.
Surely there must be a few big players who can offer me a truly global service with regional trunks and services for all our locations?Hi There
That’s a great question. The answer is, yes there are. There are a number of global carriers or at least carriers who claim to be global (and who
only serve NA/LA and Europe with bits of the pacific. However, if you use one of these guys, prepare to pay a premium, as their target market is large enterprise business who are prepared to pay for the privilege of a 'one throat too choke' relationship. I
have worked for these carriers, so know this to be fact. In most countries where this TDM telephony and now Internet, somebody has built an in country SIP business. These in country providers, tend to focus on the small to medium up to mid-market enterprise
community, for customers who want in country SIP services. A number of regional integrators have gone to these providers in the major geographies and built SIP propositions on top of their own networks and provider these to customers who are prepared to pay
for the privilege of having one supplier (again I know this to be fact, as I have worked for them).
What the industry needs is a collective agreement where Tier 1 SIP providers in each of these countries, create an alliance based network for the
handoff of traffic at International colocation points. For example, my company in the UK perhaps peering at Tele house and enabling the wholesale SIP connectivity to any carrier who likewise wants to be colocating at that point. This would enable each SIP
carrier to provider their own A-Z IPT tariff and offer in country local break out and emergency services, enabling business A in Country A to call Business B in Country B for the price of a local phone call.
It's so obvious, but finding someone who does this is a challenge. Probable today each of these in country SIP carriers have enough business by
focusing on their own country, without the need to expand their geographies and put their hands in their pockets for the required investment. Just as in the TDM industry where carriers built global A-Z traffic exchange points, this organic growth and service
evolution will take place. When, probably depends on one of two things happening. Either (a) the in country carriers seeing more opportunity from their existing customer base to develop an offer for international service provision or (b) someone visionary
and with deep pockets grabbing the opportunity.
The solution for you? Take service from your in country provider and build your own international end points if you can. If I can be of any father
help do let me know. -
Not receiving the 486 message from CUCM to Genesys via SIP trunk.
I have setup where Genesys is used along with CUCM 9.1
Below is the snapshot how it will look for call flow.
PRI----V.G----CUCM---SIP trunk (created in CUCM)-----Geneys server.
Query here is for outbound call from SIP softphone to PSTN, where if the PSTN user cancel the call.
the SIP phone is still assuming the call is continuing and after 40 sec its getting disconnected.
after looking in to the sip traces... it looks like that SIP trunk from cucm is not sending the user busy message 486....
(checked in V.G and its giving user busy)...but in the CUCM its not getting sent to the genesys...
After some time in genesys server itself send the 480 Temporarily Not Available message...
I assume I should get the 486 message from CUCM to genesys when the PSTN party disconnect the call without answering.
Please assist.From logs what i can see is after one min call legs stops transmitting and receiving packets.
You certainly need to check this Genesys support for this behavior , as far as I know there is no problem either with the CUCM or with VG.
1477 : 1515 22820290ms.1 +0 pid:0 Originate connecting
dur 00:01:15 tx:3765/602400 rx:3387/541760
IP 10.129.0.45:32596 SRTP: off rtt:0ms pl:67720/140ms lost:0/1/0 delay:55/55/65ms g711ulaw TextRelay: off
1477 : 1514 22820290ms.2 +0 pid:0 Originate active
dur 00:01:16 tx:3387/568856 rx:3838/614080
Tele 0/3/0:15 (1514) [0/3/0.31] tx:76760/76760/0ms g711ulaw noise:-68 acom:3 i/0:-64/-62 dBm
1477 : 1515 22820290ms.1 +0 pid:0 Originate connecting
dur 00:01:26 tx:4330/692800 rx:3387/541760
IP 10.129.0.45:32596 SRTP: off rtt:0ms pl:67720/140ms lost:0/1/0 delay:55/55/65ms g711ulaw TextRelay: off
1477 : 1514 22820290ms.2 +0 pid:0 Originate active
dur 00:01:30 tx:3387/568856 rx:4515/722400
Tele 0/3/0:15 (1514) [0/3/0.31] tx:90290/90290/0ms g711ulaw noise:-68 acom:3 i/0:-67/-61 dBm
Rate all the helpful post.
Thanks
Manish -
3550 - 3750 problem. Fiber type or configuration?
I'm having trouble with a link that was working with a 3600 as an end device, but won't work when replaced with a stack of 3750 switches. A couple of co-workers in our group has looked at it, but can't find anything obvious.
The path is from a 6500 on multimode trunked fiber to a converter to single mode fiber, (then under the street) to a 3550 Long Haul Gbic. Then we took copper from the 3550 to a 3660 10/half(?). To this point it used to work. We pulled the 3600 and put in a 3750 stack, and configured the copper port on the 3550 to 100/full, and the same on the 3750. The problem is that we can go to the middle device and then ping and telnet both ways from there. But we cannot go from the 6513 through the 3550 to the 3750. I turned debug icmp on the 3550, and it's not seeing anything from the 3750 when I try to go to the gateway.
Both swiches have the default gateway pointing back to the HSRP Vlan VIP of the 6513. CDP is seeing its neighbors. All interfaces seem to be up/up. Here are the snippets of configs for all ports. Maybe someone can see something I'm missing? The only thing I can think could be a mismatch somewhere between the switches, or the multimode to single mode fiber is not translating.
6513:
interface GigabitEthernet1/23
description To Building E
no ip address
udld port aggressive
switchport
switchport trunk encapsulation dot1q
3550 from 6500
interface GigabitEthernet0/1
switchport mode dynamic desirable
3550 out to 3750:
interface FastEthernet0/1
switchport trunk encapsulation dot1q
switchport mode trunk
speed 100
duplex full
3750 stack:
interface FastEthernet5/0/1
switchport trunk encapsulation dot1q
switchport mode trunk
duplex full
speed 100
Any direction would be most appreciated.
Thanks,
JimI can't say the configuration is eithre good or not as it does not really show a lot. As far as L2 configuration they seem okay as all the ports are configured for trunking, however, the trunk port between 3550 and 3750 looks like the are "forced" to turnk with the mode trunk. are the vlans in forwarding mode in both sides (show int trunk). What happens when the port between 3550 and 3750 are in desirable mode, does it build the trunk? More important questions is what ip address are you pinging on the 3750? What vlan should it belong to?
Maybe you can post the following:
1. ping from 6513 to the 3550.
2. ping from 6513 to the 3750.
I want to keep it short so might have some question after seeing the above outputs. -
Setup 2950 to talk back to 3550-24-FX
I'm trying to connect 2 switches as follows: I have a 3550-24-FX switch as a core component at the main closet, from port # 6 on the 3550-24-FX I have a fiber patch cable going to a fiber panel. Then I have another wiring closet where the fiber panel goes to another fiber panel. From closet # 2 I have a fiber patch cable going to a fiber to copper converter, then from the converter I have an ethernet patch cable to a port on the 2950 switch. I get lights on both switches at each end, but there is no traffic, I cannot ping anything and I know trunking ports are setup right. What am I missing here? Will the config file help?
Hi,
if you are sure that your physical connectivity is ok, check if the trunks is 802.1Q on the 3550. The 2950 supports 802.1Q only.
Also, check if your VTP domain and version are the same on both switches (with the ´show vtp status´) command. In order to be sure that all VLANs are properly trunked, configure the 3550 as VTP server, and the 2950 as VTP client.
Posting the configs of your devices would certainly be useful.
Regards,
GP -
Native vlan mismatch error msg from cdp
get this message from my 6509 connects to 3550. but no trunking is set between them. my other ports also have the same settings, with no err msg but have a native vlan unknown status... why???
this 6509 is not set by me.. :(I do not have enough information from you to say if it is a bug. Past output of
sh ver
sh cdp neigh detail
sh int trunk
sh run int gigx/y or sh run int fas x/y
Maybe you are looking for
-
can anyone help with this issue
-
HOW TO DISTRIBUTE FORM TO READER AND COLLECT RESPONSES IN READER
I created a fillable form in pro at home and need to distribute to my job which only have adobe reader. How do I distribute and collect responses in my work email if the forms are filled out in reader?
-
Can't get the proxy authentication work over SSL from weblogic 8.1
I'm trying to make a HTTPS connection through proxy server, and I get a 407 proxy authentication exception. I can succesfully connect from a stand-alone program, but I can't do it from a web application deployed on weblogic 8.1. I implemented weblogi
-
Installing client 8.1.7 on AIX 5.2
Especifically i need the pre compilers of C and Cobolo runing fine... but im facing an make: 1254-002 Cannot find a rule to create target error during install. Can anyone give me a hand please? Best Regards.
-
Problema Creative Cloud per desktop
Sul mio computer non riesco ad installare Creative Cloud, mi viene detto che non è possibile effettuare l'installazione. Come posso risolvere?