Trust tablet doesn't work
Hello everyone!
Recently I bought Trust TB-5300 tablet, and faced a problem: I cannot draw anything using it! When I try to draw a line, nothing happens. Sometimes, when i tap repeatedly on tablet, it makes some dots on screen, or when I draw with a great pressuse on it - it draws. But - only straight lines, i can't draw curved line (it takes a point i stated drawind and a finishing point and connects it).
Tried to change sensitivity in Control Panel and Tablet Settings - no luck. What's interesting - i have such problem only in PS. In Corel it works fine.
What else can i do?
I have the same tablet and had the same problem.
You have to download the new driver and delete the old one.
The driver i got was not made by TRUST it was a diffrent tablet but there the same just a diffrent name.
Also close photoshop and re open it after you instal the new Driver ( or just restart )
Hope i helped and if you need more help
[email protected]
( I will dig up the old forum that helped me )
Similar Messages
-
My graphics tablet doesn't work in Flash CS4?
In Flash the cursor won't move if I use my tablet, but it moves if I use the mouse.. the tablet works outside of flash, like in paint.
I use Windows 7 if thats the problem.
EDIT: Yes, I do have the latest drivers for Windows 7.OK, so if any one has the same problem.. I fixed it by deleting an old driver I had and then installed the newest driver for Windows 7...
-
Portege M750 - Tablet doesn't work after Windows 7 upgrade
Got an Windows 7 upgrade through Toshiba for my M750 tablet pc. Everything went smooth and seems to be working, except (!) the tablet functions. The pen is not recognized. Touch a little bit, but unpredictably.
Please advise what I can do.
ThanksHi
Are all devices recognized properly in device manager? Have you checked this?
As far as I know you have to install or update the Dual Touch driver. This dirver is for the Digitizer and touch screen model. It enables the functionality that the Tablet PC Pen or finger can be used as a pointing device.
You can download this driver on the Toshiba website.
Check this!! -
How can I activate an old version of Photoshop that I've loaded on my new tablet? The web activation doesn't work, and when I call the number, it says it's not being used anymore. Meanwhile, I'm down to 13 days till it stops working due to not being activated. HELP? I really need to continue using this product for my home business.It works fine not activated but the threat is that it will stop working in 13 more days if I don't get it activated, and none of the activation methods they list seem to work.
The new serial number is to the right of your chosen download.
-
User Configuration/Policies/Administrative Templates
- Using Office 2013 group policy template to define Trusted Locations and Template Locations doesn't work
Microsoft Word 2013/Word Options/Security/Trust Center/Trusted Locations
- Allow Trusted Locations on the network:
Enabled
- Trusted Location #1:
Enabled
Path: //server/sharedfoldername [Edit: Path:
\\server\sharedfoldername]
Date: June 10, 2013
Description: Trusted Location
Allow sub folders: Enabled
The policy appears to apply to the client correctly by adding the following registry key and values:
HKEY_CURRENT_USER\Software\Policies\Microsoft\office\15.0\word\security\trusted locations\location1
allowsubfolders: 1
date: June 10, 2013
Description: Trusted Location
Path: //server/sharedfoldername [Edit: Path:
\\server\sharedfoldername]
However, when you open Word Options/Trust Centre/Trust Centre Settings…/Trusted Locations
There are no trusted locations listed under ‘Policy Locations’
I have tried setting similar settings for setting the Shared Templates folder location and just like the trusted locations policy, the registry keys are created properly in HKEY_CURRENT_USER\Software\Policies however word doesn’t
seem to recognize these either.
This used to work flawlessly using the administrative templates for Word 2007 and 2010. Has anyone been able to get these policies to apply successfully, or know why office doesn’t recognize these settings from the Policies registry
Key?This would have been an easy solution to the issue. Unfortunately it isn't the problem. This question was originally posted on another Microsoft site and
was transferred here and when it was transferred the path's changed from the original post:
\\server\sharedfodlername to //server/sharedfoldername. (I will edit the question to show up as it did in the original post) Not sure how that happened. This
is still an issue that I haven't been able to get working correctly.
As it turns out the 'New from Template' interface Word 2013 has developed is very bulky with large thumbnails and is not very customizable nor practical for an office
that has a large number of templates. Because I am unsatisfied with the display and performance of the 'New' template chooser I sought after a solution to change the way word creates a document from a template in another thread:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-word/how-can-you-change-the-display-of-templates-in/d49194b9-a6b4-4768-8502-7d7b50e9dd65 working through this issue with Jay we were able to develop
some VB script with handles a very large number of templates in a list view and it works much faster than the built-in Word interface. The above thread is how I've worked around trying to define a shared template location and I am quite happy with it. -
Works... Doesn't Work... Works!.... Doesn't Work.... Trust Time Machine?
My setup:
MacBook Pro
PowerMac G5 + External SATA Drive
Airport Extreme + External USB Drive
The PM backs up fine to the External SATA, about 90% of the time.
The MBP backs up to the External SATA (shared) about 5% of the time so I purchased the External USB for use with the Airport Extreme.
The first time I set it up and used it, it worked fine. Then it stopped working after a MBP reboot. Then randomly, this morning I noticed it was working again. But now it's not. Whenever it doesn't work it fails with "*+Time Machine Error. The backup volume could not be mounted.+*" This occurs almost 100% of the time.
The volume is in fact, already mounted. I can browse it and it is fully accessible on my desktop.
Now, if it never worked it would be one thing, but having this randomly work really has me fed up.
How could I ever trust TM knowing that the one time I really need it it has a greater than 50% chance of failing?
One more thing *I can browse my old backups using Time Machine as if nothing were wrong.*
Thoughts?{ so i formatted the disk, reinstalled leopard and restored all my information using my time machine back-up file.
how exactly did you do that? please be specific. did you use system restore utility on the install DVD? did you use setup assistant after the reinstall? or did you use migration assistant later? or did you do it by hand?
in general you can reset the password as follows:
http://docs.info.apple.com/article.html?path=Mac/10.5/en/11627.html
however, depending on what you did the problem might be something else. -
Trust tablet + illustrator CS3 + pressure problem
Hi guys,
I've get recently trust slimline tablet for mac. Using Mac OS X 10.6.2 with adobe cs3. I've installed the tablet, and it works ok with photoshop and does recognize brush pressure and everything. But illustrator doesn't seem to see it - I still can draw and use the pen, but when I'm trying to change calligraphic (or any other) brushes settings to pressure sensitive it's impossible: the only variables working are fixed and random. the pen icon in right bottom corner is crossed. Have contacted trust - and there is no special drivers for illustrator, anyway have installed the newest drivers, have installed illustrator update. restarted everything and so on - and still no result. and photoshop still perfect. Any advice? Maybe I should turn on something different than just brushes settings? Have been trying to find any solutions on forums, but no luck there
Thanks in advanceI got the one for mac. [Slimline design tablet for Mac, 15908, 'Fully compatible with Mac OS tablet']. If it was to be working with windows only would expect it to not work with photoshop and other things as well....
-
CS6 does not recognise pen pressure (Trust Tablet) though all other programs do
Hi
Trying to get pen pressure to work via the Brush Presets menu. I keep getting the 'exclamation mark' and it doesn't work. Pressure sensitivity IS working - just not in CS6. Please help!
Trust Tablet 18469-02Hi,
What operating system are you using?
Have you installed the latest driver from the trust website? -
Hanvon USB tablet does not work
I got a Hanvon 0806 Painting Master Tablet as a gift and after following the simple instructions in the poorly written readme file, and installing the driver, it doesn't work. It works on my friend's PC, but not on my iMac. I've tried plugging it into every USB port on the Mac itself, the hub, and even the keyboard but it just won't work.
Anything I'm doing wrong or anything extra I should know about Hanvon devices?Morolino
See if this driver supporting Intel iMac's fixes your issue!
http://www.hanvon.com/news200602.htm
Dennis -
Tecra M4 - tablet function not working
Hey guys,
please excuse my bad english first.
I got a Tecra M4 and after installing xp tablet and drivers the tablte still doesn't work.
Did I forget a driver? Which one is responsable for the tabletscreen?
thx,
martiI used a microsoft disk
on the first cd there is also an i386 folder but with a different content (about 2000 files). it seems to me like the second cd is an additional setup cd (about 90 files) which the setup doesn't ask for.
@Tonny:
i did the following:
i copied the folder to c:\ (so it's c:\I386\)
then i've gone on Start->Run and entered setup (-> a appearing message says "Please go to the Control Panel to install and configure system components")
and winnt.exe (-> windows cannot find "winnt.exe")
when i went to control panel-> Add or Remove Programs->Add/Remove Windows Components the windows components wizard appears but the shown components doesn't contain anything about tablet or so.
i guess i did something wrong... -
My wacom tablet does not work correctly after updating to mavericks.
My wacom doesn't work.
Jason, how did you switch back? My tablet does not work either. All I can do for the moment is work on my laptop which has the old system.
Thanks,
Teresa
I was almost certain that the new osx would be trouble as was Lion and after that Mountail Lion. So, instead of my usual hard drive clone, which I make with superduper, I made a second one just to be certain. After 10 minutes of Mavericks, I am happy back to snow leopard.
I really think that it is the most developed, glitch free operating system. If it wasn't for all these money thirsty companies stopping the support of the previous op. systems perhaps we could stop at Snow leopard. What more to ask. Even aesthetically osx 10.9 is much worse that snow leopard.
Anyway, long answer. sorry. It is a good habit to clone your HD once in a while.
p.s. my only reason for wanting to upgrade is because Lightroom stopped support but I am still doing my work with the previous versions. I guess people will allways think that if they have the newest, biggest, baddest version of a software will make them better in what they do..or in who they are, really. -
Printing PDDoc with AFExecuteThisScript() doesn't work after an upgrade from SDK 5 to SDK8
Hello,
I have made an upgrade of my plug-in which was developed with the Acrobat 5 SDK. I upgrade it to Acrobat 8 SDK and my print function doesn't work anymore.
Actually I print my document using a javascript trusted function instead the function provided by the C++ library for internal reason.
Here below is the code used to print my document :
char szJavaPrint[6000];
sprintf(szJavaPrint,
"pp = this.getPrintParams(); \r\n"
// fill pp with parameters
"pp.interactive = pp.constants.interactionLevel.silent; \r\n"
"\r\n"
"this.trustedPrint(this, pp);"
PDDoc pdDoc = AVDocGetPDDoc(avDoc);
AFExecuteThisScript(pdDoc, szJavaPrint, NULL);
It was working with the Acrobat 5 SDK but the print seems to have no effect using the Acrobat 8 SDK. I know that there is a change between Acrobat 5 and 8 concerning the Character Set (currently I set the Character Set to "Not Set" in the Configuration Properties of the project) but I don't think that my problem comes from the Character Set.
All ideas to resolve this problem are welcome.
Kind regards,
JoeSee what happens if you remove the "setting of interactive to silent"...
There is a restriction on silent printing in Acrobat, but I would not have expected that to be passed into this method - but it could have been overlooked and be a bug.
Also, I don't recall a trustedPrint() method in Acrobat JS - check the documentation for the correct name of this function... -
Ever since upgrading to Mavericks, Adobe Flash Player doesn't work.
I upgraded from Snow Leopard to Mavericks recently and since then, sites do not recognize that I have Adobe Flash Player installed at all. I currently have the most updated version: "Plug-in version 11.9.900.170 is installed." I noticed this when family and friends sent me e-cards. I go to the sites to view them and it tells me I need to download Adobe Flash Player.
I have uninstalled it twice and downloaded it twice. Installation is always successful and complete but when I test it to view an e-card sent to me from a reliable site, it still states that I need to install it to view the card. I HAVE IT!! lol I don't understand why the sites are not recognizing it on my computer.
I've tested it out on both Safari and Firefox and it doesn't work on either. Safari is 7.0.1 (current).
Can anyone help me fix this? Troubleshooting on Adobe Flash Player basically tells me to uninstall and re-install. Still doesn't help. ~sigh~
Thanks in advance for any help!If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 5.
Step 1
If you're only having trouble with YouTube videos, sign in to your YouTube account and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 2
If you're getting a "blocked plug-in" error, then from the menu bar select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Check Now. Quit and relaunch your browser.
Step 3
Triple-click anywhere in the line below on this page to select it:
/Library/Internet Plug-Ins
Right-click or control-click the highlighted text and select
Services ▹ Open
from the contextual menu.* A folder should open. Delete the following item, or anything with a similar name, if present:
Flash Player (failing).plugin
You may be prompted for your login password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 4
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 5
If you get a "missing plug-in" error, select
Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
Allow (or Enable) plug-ins
Then click the button marked
Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 6
Select
Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.
Step 7
In the Safari preference window, select
Privacy ▹ Remove All Website Data
Close the window. Then select
▹ System Preferences… ▹ Flash Player ▹ Advanced
and click Delete All. Close the preference pane. -
RD Web access SSO - remote desktop doesn't work
Hi,
This is my first post in here, and I hope you gays can help me out.
I am currently experiencing some issues with RD Web SSO not working as I would like it to work. I have found countless articles and guides describing how to get it to work, but no guide have yet helped me.
The problem is that when I log in on the web access and open a published application everything works fine I wait 5 sec and the application pups up, but when I try to open "Remote Desktop" then I get a new log in box where I must enter my log in credentials
again (after entering my credentials everything work great.)
The problems I am currently facing is produced in a demo environment configured as follows:
1x DC server (DC01) also the lic server
2x RDS server (RDS01/02)
1x RDS Connection broker (RDCM01) I have created a farm named "farm01.mydomain.com"
1x RDS Web access server (RDWA01)
1x RDS Gateway (RDSGW01)
(All the Servers are installed with Windows server 2008 (R2) SP1, and have the latest update.)
I am publishing my demo environment on the internet, i have created a domain name for my gateway and my web access and they are both accessible from the web (rdwa.mydomain.com and rdsgw.mydomaim,com). I also have secured everything with an SSL wildcard certificate
( my external and intern domain names are the same so I am using one SSl certificate) that is trusted on the web.
when I log in on the web access server trough (IE9 or IE8 ) from another network(wan) and I open a published application (calculator), it pop ups in just a few seconds. But when I try to open my Remote desktop I get a login box where I must enter my
username and password one more time.. after that remote desktop opens and everything works great.
My laptop is a Windows 7 professional with RDP 7 and IE 9, and is not member of a domain (just a workstation), I have tested it from multiple workstations and networks(Also win 7 and RDP7) but even there I have the same problem.
Thinks that I have tried tell now:
I have created a kerberos account as mentioned on
MSDN
I have checked my group permissions as mentioned
here
And many more blogs and forums
I have tried multiple settings on RDCM, RDWA, RDSGW and RDS server
Right now I am out of ideas, and I hope you gays can help me out..
thanks in advance,
PouyanThnx for you advise,
Did you go into your RemoteApp Deployment settings and change the server name to the farm name "farm01.mydomain.com?"
Yes
Also in the Session Broker's RemoteApp and Desktop Connection Properties window change the Connection ID to the farm name as well.
actually I couldn't find out what to put on the connection ID so I had left it just default, but after changing it to the farm name it still doesn't work
Did you sign you apps with the cert used on your RDS servers?
yes, I am using a wildcard ssl certificate to sign all the servers/apps with.
there is
something that
strikes me, when I log on the web access and click on a published application (that is hosted from the same RDS servers) then I get a information box. when I click on the "details" button I see on the bottom "use the following credentials to connect" and my
domain and username are published there. But when I click on the "Remote desktop" icon and do the same I can't see this information!!
Also I don't think that its an SSL problem, because after log in again it works perfect without any warning. -
[SOLVED] - xset at startup doesn't work
I use the following command to set my screensaver options
xset dpms 30 60 300
After reading the Arch wiki, I found out that this can be made permanent by adding this to the xorg.conf or putting it in ~/.xprofile
Contents of xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Tue Dec 8 21:04:28 PST 2009
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "StandbyTime" "2"
Option "SuspendTime" "3"
Option "OffTime" "5"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Dell Inspiron 1520 WXGA+ LCD"
VendorName "Dell"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "Device" "/dev/input/mouse0"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
Option "CircularScrolling" "1"
Option "CircScrollTrigger" "0"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
Option "BlankTime" "0.1"
Option "StandbyTime" "0.5"
Option "SuspendTime" "1"
Option "OffTime" "5"
EndSection
Contents of ~/.xprofile
xset dpms 30 60 300
I even added this to crontab
0 * * * * ~/Wallpapers/change-background-folder.py
0 * * * * /usr/bin/xset s 30
0 * * * * /usr/bin/xset dpms 60 120 300
@reboot ID=screensaver AFTER=2m /usr/bin/xset s 30
@reboot ID=monitor AFTER=2m /usr/bin/xset dpms 60 120 300
@reboot ID=vu AFTER=1m vuze
Still after doing all this, when I give xset q after a reboot, I get
[theta@boolean-pc ~]$ xset q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000000
XKB indicators:
00: Caps Lock: off 01: Num Lock: off 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 30
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 3/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 600 cycle: 600
Colors:
default colormap: 0x20 BlackPixel: 0 WhitePixel: 16777215
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,/usr/share/fonts/100dpi/,/usr/share/fonts/75dpi/,built-ins
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
Font cache:
Server does not have the FontCache Extension
The parameters are still all 0.
Please suggest a solution.
Apoorv
Last edited by theta (2011-08-02 15:56:06)jasonwryan wrote:
If you have set up your .xinitrc the way karol suggests and it still doesn't work, you could delay it kicking in until X has finished loading
(sleep 15s && xset dpms 30 60 300) &
exec yourwm
That may get around the problem bernarcher describes...
Thank you! This works very well for me.
It's the only way I can get it to work.
For the records, so the smart people can find the problem, here is my xorg.conf:
Section "ServerLayout"
Identifier "ServerLayout0"
Screen 0 "BenQ" 0 0
#Option "BlankTime" "0"
Option "StandbyTime" "10"
Option "SuspendTime" "20"
Option "OffTime" "30"
EndSection
Section "Screen"
Identifier "BenQ"
Device "Intel4000"
Monitor "HDMI2"
DefaultDepth 24
SubSection "Display"
#Depth "24"
EndSubSection
EndSection
Section "Monitor"
Identifier "HDMI2"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Intel4000"
Driver "intel"
BusID "PCI:0:2:0"
Option "AccelMethod" "sna"
Option "TearFree" "true"
EndSection
# Read and parsed by systemd-localed. It's probably wise not to edit this manually too freely.
Section "InputClass"
Identifier "system-keyboard"
MatchIsKeyboard "on"
Option "XkbLayout" "se"
EndSection
# Catch-all evdev loader for udev-based systems
# We don't simply match on any device since that also adds accelerometers
# and other devices that we don't really want to use. The list below
# matches everything but joysticks.
Section "InputClass"
Identifier "evdev pointer catchall"
MatchIsPointer "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev keyboard catchall"
MatchIsKeyboard "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchpad catchall"
MatchIsTouchpad "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev tablet catchall"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Section "InputClass"
Identifier "evdev touchscreen catchall"
MatchIsTouchscreen "on"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
EndSection
Xorg seems to not care about my settings in xorg.conf and sets DPMS values to "0":
$ xset -q
Keyboard Control:
auto repeat: on key click percent: 0 LED mask: 00000002
XKB indicators:
00: Caps Lock: off 01: Num Lock: on 02: Scroll Lock: off
03: Compose: off 04: Kana: off 05: Sleep: off
06: Suspend: off 07: Mute: off 08: Misc: off
09: Mail: off 10: Charging: off 11: Shift Lock: off
12: Group 2: off 13: Mouse Keys: off
auto repeat delay: 500 repeat rate: 33
auto repeating keys: 00ffffffdffffbbf
fadfffefffedffff
9fffffffffffffff
fff7ffffffffffff
bell percent: 50 bell pitch: 400 bell duration: 100
Pointer Control:
acceleration: 2/1 threshold: 4
Screen Saver:
prefer blanking: yes allow exposures: yes
timeout: 0 cycle: 0
Colors:
default colormap: 0x22 BlackPixel: 0x0 WhitePixel: 0xffffff
Font Path:
/usr/share/fonts/misc/,/usr/share/fonts/TTF/,/usr/share/fonts/Type1/,built-ins
DPMS (Energy Star):
Standby: 0 Suspend: 0 Off: 0
DPMS is Enabled
Monitor is On
And the xorg log:
[ 17738.153]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[ 17738.194] X Protocol Version 11, Revision 0
[ 17738.208] Build Operating System: Linux 3.14.0-4-ARCH x86_64
[ 17738.223] Current Operating System: Linux arch6 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64
[ 17738.223] Kernel command line: console=tty0 xen-pciback.hide=(01:00.0)(01:00.1)(03:00.0)(02:00.0)(00:14.0)(00:1d.0) root=/dev/VG/Aroot rw
[ 17738.254] Build Date: 14 April 2014 08:39:09AM
[ 17738.269]
[ 17738.285] Current version of pixman: 0.32.4
[ 17738.314] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 17738.314] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 17738.375] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Apr 29 22:10:19 2014
[ 17738.390] (==) Using config file: "/etc/X11/xorg.conf"
[ 17738.406] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 17738.406] (==) ServerLayout "ServerLayout0"
[ 17738.406] (**) |-->Screen "BenQ" (0)
[ 17738.406] (**) | |-->Monitor "HDMI2"
[ 17738.406] (**) | |-->Device "Intel4000"
[ 17738.406] (**) Option "StandbyTime" "10"
[ 17738.406] (**) Option "SuspendTime" "20"
[ 17738.406] (**) Option "OffTime" "30"
[ 17738.406] (==) Automatically adding devices
[ 17738.406] (==) Automatically enabling devices
[ 17738.406] (==) Automatically adding GPU devices
[ 17738.406] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 17738.406] Entry deleted from font path.
[ 17738.406] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 17738.406] Entry deleted from font path.
[ 17738.406] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 17738.406] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 17738.406] Entry deleted from font path.
[ 17738.406] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 17738.406] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 17738.406] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 17738.406] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 17738.406] (II) Loader magic: 0x804c80
[ 17738.406] (II) Module ABI versions:
[ 17738.406] X.Org ANSI C Emulation: 0.4
[ 17738.406] X.Org Video Driver: 15.0
[ 17738.406] X.Org XInput driver : 20.0
[ 17738.406] X.Org Server Extension : 8.0
[ 17738.406] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 17738.408] (--) PCI:*(0:0:2:0) 8086:0162:1458:d000 rev 9, Mem @ 0xf4400000/4194304, 0xc0000000/268435456, I/O @ 0x0000f000/64
[ 17738.408] (--) PCI: (0:1:0:0) 1002:67b1:1002:0b00 rev 0, Mem @ 0xd0000000/268435456, 0xe0000000/8388608, 0xf4b00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 17738.408] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 17738.424] Initializing built-in extension Generic Event Extension
[ 17738.439] Initializing built-in extension SHAPE
[ 17738.454] Initializing built-in extension MIT-SHM
[ 17738.468] Initializing built-in extension XInputExtension
[ 17738.482] Initializing built-in extension XTEST
[ 17738.495] Initializing built-in extension BIG-REQUESTS
[ 17738.509] Initializing built-in extension SYNC
[ 17738.523] Initializing built-in extension XKEYBOARD
[ 17738.536] Initializing built-in extension XC-MISC
[ 17738.548] Initializing built-in extension SECURITY
[ 17738.561] Initializing built-in extension XINERAMA
[ 17738.573] Initializing built-in extension XFIXES
[ 17738.585] Initializing built-in extension RENDER
[ 17738.597] Initializing built-in extension RANDR
[ 17738.608] Initializing built-in extension COMPOSITE
[ 17738.620] Initializing built-in extension DAMAGE
[ 17738.631] Initializing built-in extension MIT-SCREEN-SAVER
[ 17738.643] Initializing built-in extension DOUBLE-BUFFER
[ 17738.654] Initializing built-in extension RECORD
[ 17738.665] Initializing built-in extension DPMS
[ 17738.677] Initializing built-in extension Present
[ 17738.688] Initializing built-in extension DRI3
[ 17738.700] Initializing built-in extension X-Resource
[ 17738.711] Initializing built-in extension XVideo
[ 17738.722] Initializing built-in extension XVideo-MotionCompensation
[ 17738.734] Initializing built-in extension XFree86-VidModeExtension
[ 17738.746] Initializing built-in extension XFree86-DGA
[ 17738.757] Initializing built-in extension XFree86-DRI
[ 17738.769] Initializing built-in extension DRI2
[ 17738.769] (II) "glx" will be loaded by default.
[ 17738.769] (II) LoadModule: "dri2"
[ 17738.769] (II) Module "dri2" already built-in
[ 17738.769] (II) LoadModule: "glamoregl"
[ 17738.769] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 17738.770] (II) Module glamoregl: vendor="X.Org Foundation"
[ 17738.770] compiled for 1.15.0, module version = 0.6.0
[ 17738.770] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17738.770] (II) LoadModule: "glx"
[ 17738.770] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17738.770] (II) Module glx: vendor="X.Org Foundation"
[ 17738.770] compiled for 1.15.1, module version = 1.0.0
[ 17738.771] ABI class: X.Org Server Extension, version 8.0
[ 17738.771] (==) AIGLX enabled
[ 17738.782] Loading extension GLX
[ 17738.782] (II) LoadModule: "intel"
[ 17738.782] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 17738.782] (II) Module intel: vendor="X.Org Foundation"
[ 17738.783] compiled for 1.15.0, module version = 2.99.911
[ 17738.783] Module class: X.Org Video Driver
[ 17738.783] ABI class: X.Org Video Driver, version 15.0
[ 17738.783] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 17738.783] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 17738.783] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 17738.783] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 17738.783] (++) using VT number 1
[ 17738.783] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 17738.783] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx
[ 17738.783] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 17738.783] (==) intel(0): RGB weight 888
[ 17738.783] (==) intel(0): Default visual is TrueColor
[ 17738.783] (**) intel(0): Option "AccelMethod" "sna"
[ 17738.783] (**) intel(0): Option "TearFree" "true"
[ 17738.783] (**) intel(0): Framebuffer tiled
[ 17738.784] (**) intel(0): Pixmaps tiled
[ 17738.784] (**) intel(0): "Tear free" enabled
[ 17738.784] (**) intel(0): Forcing per-crtc-pixmaps? no
[ 17738.784] (II) intel(0): Output VGA1 using monitor section HDMI2
[ 17738.784] (II) intel(0): Output HDMI1 has no monitor section
[ 17738.784] (II) intel(0): Output DP1 has no monitor section
[ 17738.784] (II) intel(0): Output HDMI2 using monitor section HDMI2
[ 17738.784] (II) intel(0): Output DP2 has no monitor section
[ 17738.784] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 17738.784] (--) intel(0): Output HDMI2 using initial mode 1920x1080 on pipe 0
[ 17738.784] (==) intel(0): DPI set to (96, 96)
[ 17738.784] (II) Loading sub module "dri2"
[ 17738.784] (II) LoadModule: "dri2"
[ 17738.784] (II) Module "dri2" already built-in
[ 17738.784] (==) Depth 24 pixmap format is 32 bpp
[ 17738.784] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 17738.784] (==) intel(0): Backing store enabled
[ 17738.784] (==) intel(0): Silken mouse enabled
[ 17738.784] (II) intel(0): HW Cursor enabled
[ 17738.784] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 17738.784] (**) intel(0): DPMS enabled
[ 17738.784] (II) intel(0): [DRI2] Setup complete
[ 17738.784] (II) intel(0): [DRI2] DRI driver: i965
[ 17738.784] (II) intel(0): [DRI2] VDPAU driver: i965
[ 17738.784] (II) intel(0): direct rendering: DRI2 Enabled
[ 17738.784] (==) intel(0): hotplug detection: "enabled"
[ 17738.784] (--) RandR disabled
[ 17738.789] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 17738.789] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 17738.789] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 17738.789] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 17738.789] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 17738.789] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 17738.789] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 17738.789] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 17738.789] (II) AIGLX: Loaded and initialized i965
[ 17738.789] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 17738.791] (II) intel(0): switch to mode [email protected] on HDMI2 using pipe 0, position (0, 0), rotation normal, reflection none
[ 17738.801] (II) intel(0): Setting screen physical size to 508 x 285
[ 17738.839] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 17738.839] (**) Power Button: Applying InputClass "system-keyboard"
[ 17738.839] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17738.839] (II) LoadModule: "evdev"
[ 17738.839] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 17738.840] (II) Module evdev: vendor="X.Org Foundation"
[ 17738.840] compiled for 1.15.0, module version = 2.8.2
[ 17738.840] Module class: X.Org XInput Driver
[ 17738.840] ABI class: X.Org XInput driver, version 20.0
[ 17738.840] (II) Using input driver 'evdev' for 'Power Button'
[ 17738.840] (**) Power Button: always reports core events
[ 17738.840] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 17738.840] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17738.840] (--) evdev: Power Button: Found keys
[ 17738.840] (II) evdev: Power Button: Configuring as keyboard
[ 17738.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 17738.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 17738.840] (**) Option "xkb_rules" "evdev"
[ 17738.840] (**) Option "xkb_model" "pc104"
[ 17738.840] (**) Option "xkb_layout" "se"
[ 17738.870] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[ 17738.870] (**) Video Bus: Applying InputClass "system-keyboard"
[ 17738.870] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 17738.870] (II) Using input driver 'evdev' for 'Video Bus'
[ 17738.870] (**) Video Bus: always reports core events
[ 17738.870] (**) evdev: Video Bus: Device: "/dev/input/event2"
[ 17738.871] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 17738.871] (--) evdev: Video Bus: Found keys
[ 17738.871] (II) evdev: Video Bus: Configuring as keyboard
[ 17738.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[ 17738.871] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 17738.871] (**) Option "xkb_rules" "evdev"
[ 17738.871] (**) Option "xkb_model" "pc104"
[ 17738.871] (**) Option "xkb_layout" "se"
[ 17738.871] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 17738.871] (**) Power Button: Applying InputClass "system-keyboard"
[ 17738.871] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 17738.871] (II) Using input driver 'evdev' for 'Power Button'
[ 17738.871] (**) Power Button: always reports core events
[ 17738.871] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 17738.871] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 17738.871] (--) evdev: Power Button: Found keys
[ 17738.871] (II) evdev: Power Button: Configuring as keyboard
[ 17738.871] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 17738.871] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 17738.871] (**) Option "xkb_rules" "evdev"
[ 17738.871] (**) Option "xkb_model" "pc104"
[ 17738.871] (**) Option "xkb_layout" "se"
[ 17738.871] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 17738.872] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 17738.872] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 17738.872] (**) Microsoft Wired Keyboard 600: always reports core events
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 17738.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/0003:045E:0750.0001/input/input5/event3"
[ 17738.872] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 9)
[ 17738.872] (**) Option "xkb_rules" "evdev"
[ 17738.872] (**) Option "xkb_model" "pc104"
[ 17738.872] (**) Option "xkb_layout" "se"
[ 17738.872] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.872] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
[ 17738.872] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
[ 17738.872] (**) Microsoft Wired Keyboard 600: always reports core events
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Using mtdev for this device
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Vendor 0x45e Product 0x750
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found 1 mouse buttons
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found scroll wheel(s)
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found relative axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found absolute axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found absolute multitouch axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found x and y absolute axes
[ 17738.872] (--) evdev: Microsoft Wired Keyboard 600: Found keys
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Forcing relative x/y axes to exist.
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as mouse
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Configuring as keyboard
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: Adding scrollwheel support
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
[ 17738.872] (**) evdev: Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.872] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.1/0003:045E:0750.0002/input/input6/event4"
[ 17738.872] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD, id 10)
[ 17738.872] (**) Option "xkb_rules" "evdev"
[ 17738.872] (**) Option "xkb_model" "pc104"
[ 17738.872] (**) Option "xkb_layout" "se"
[ 17738.872] (II) evdev: Microsoft Wired Keyboard 600: initialized for relative axes.
[ 17738.873] (WW) evdev: Microsoft Wired Keyboard 600: ignoring absolute axes.
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
[ 17738.873] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
[ 17738.873] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
[ 17738.873] (**) Microsoft Wired Keyboard 600: Applying InputClass "system-keyboard"
[ 17738.873] (II) No input driver specified, ignoring this device.
[ 17738.873] (II) This device may have been added with another device file.
[ 17738.873] (II) config/udev: Adding input device A..... G3 (/dev/input/event5)
[ 17738.873] (**) A..... G3: Applying InputClass "evdev pointer catchall"
[ 17738.873] (II) Using input driver 'evdev' for 'A..... G3'
[ 17738.873] (**) A..... G3: always reports core events
[ 17738.873] (**) evdev: A..... G3: Device: "/dev/input/event5"
[ 17738.873] (--) evdev: A..... G3: Vendor 0xe0ff Product 0x2
[ 17738.873] (--) evdev: A..... G3: Found 12 mouse buttons
[ 17738.873] (--) evdev: A..... G3: Found scroll wheel(s)
[ 17738.873] (--) evdev: A..... G3: Found relative axes
[ 17738.873] (--) evdev: A..... G3: Found x and y relative axes
[ 17738.873] (II) evdev: A..... G3: Configuring as mouse
[ 17738.873] (II) evdev: A..... G3: Adding scrollwheel support
[ 17738.873] (**) evdev: A..... G3: YAxisMapping: buttons 4 and 5
[ 17738.873] (**) evdev: A..... G3: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.873] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:E0FF:0002.0003/input/input7/event5"
[ 17738.873] (II) XINPUT: Adding extended input device "A..... G3" (type: MOUSE, id 11)
[ 17738.873] (II) evdev: A..... G3: initialized for relative axes.
[ 17738.873] (**) A..... G3: (accel) keeping acceleration scheme 1
[ 17738.873] (**) A..... G3: (accel) acceleration profile 0
[ 17738.873] (**) A..... G3: (accel) acceleration factor: 2.000
[ 17738.873] (**) A..... G3: (accel) acceleration threshold: 4
[ 17738.874] (II) config/udev: Adding input device A..... G3 (/dev/input/mouse0)
[ 17738.874] (II) No input driver specified, ignoring this device.
[ 17738.874] (II) This device may have been added with another device file.
[ 17738.874] (II) config/udev: Adding input device A..... G3 (/dev/input/event6)
[ 17738.874] (**) A..... G3: Applying InputClass "system-keyboard"
[ 17738.874] (**) A..... G3: Applying InputClass "evdev keyboard catchall"
[ 17738.874] (II) Using input driver 'evdev' for 'A..... G3'
[ 17738.874] (**) A..... G3: always reports core events
[ 17738.874] (**) evdev: A..... G3: Device: "/dev/input/event6"
[ 17738.874] (--) evdev: A..... G3: Vendor 0xe0ff Product 0x2
[ 17738.874] (--) evdev: A..... G3: Found 1 mouse buttons
[ 17738.874] (--) evdev: A..... G3: Found scroll wheel(s)
[ 17738.874] (--) evdev: A..... G3: Found relative axes
[ 17738.874] (II) evdev: A..... G3: Forcing relative x/y axes to exist.
[ 17738.874] (--) evdev: A..... G3: Found absolute axes
[ 17738.874] (II) evdev: A..... G3: Forcing absolute x/y axes to exist.
[ 17738.874] (--) evdev: A..... G3: Found keys
[ 17738.874] (II) evdev: A..... G3: Configuring as mouse
[ 17738.874] (II) evdev: A..... G3: Configuring as keyboard
[ 17738.874] (II) evdev: A..... G3: Adding scrollwheel support
[ 17738.874] (**) evdev: A..... G3: YAxisMapping: buttons 4 and 5
[ 17738.874] (**) evdev: A..... G3: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17738.874] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:E0FF:0002.0004/input/input8/event6"
[ 17738.874] (II) XINPUT: Adding extended input device "A..... G3" (type: KEYBOARD, id 12)
[ 17738.874] (**) Option "xkb_rules" "evdev"
[ 17738.874] (**) Option "xkb_model" "pc104"
[ 17738.874] (**) Option "xkb_layout" "se"
[ 17738.874] (II) evdev: A..... G3: initialized for relative axes.
[ 17738.874] (WW) evdev: A..... G3: ignoring absolute axes.
[ 17738.874] (**) A..... G3: (accel) keeping acceleration scheme 1
[ 17738.874] (**) A..... G3: (accel) acceleration profile 0
[ 17738.874] (**) A..... G3: (accel) acceleration factor: 2.000
[ 17738.874] (**) A..... G3: (accel) acceleration threshold: 4
[ 17738.874] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event13)
[ 17738.874] (II) No input driver specified, ignoring this device.
[ 17738.874] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event11)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event10)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event9)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event8)
[ 17738.875] (II) No input driver specified, ignoring this device.
[ 17738.875] (II) This device may have been added with another device file.
[ 17738.875] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event7)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17738.876] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event14)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17738.876] (II) config/udev: Adding input device PC Speaker (/dev/input/event15)
[ 17738.876] (II) No input driver specified, ignoring this device.
[ 17738.876] (II) This device may have been added with another device file.
[ 17739.315] (II) intel(0): EDID vendor "BNQ", prod id 32517
[ 17739.315] (II) intel(0): Using EDID range info for horizontal sync
[ 17739.315] (II) intel(0): Using EDID range info for vertical refresh
[ 17739.315] (II) intel(0): Printing DDC gathered Modelines:
[ 17739.315] (II) intel(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 17739.315] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 17739.315] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 17739.315] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 17739.315] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 17739.315] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 17739.315] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 17739.316] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 17739.316] (II) intel(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 -hsync +vsync (50.9 kHz e)
[ 17739.316] (II) intel(0): Modeline "640x480"x120.0 52.41 640 680 744 848 480 481 484 515 -hsync +vsync (61.8 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "800x600"x0.0 73.25 800 848 880 960 600 603 607 636 +hsync -vsync (76.3 kHz e)
[ 17739.316] (II) intel(0): Modeline "1024x768"x100.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz e)
[ 17739.316] (II) intel(0): Modeline "1024x768"x0.0 115.50 1024 1072 1104 1184 768 771 775 813 +hsync -vsync (97.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x900"x0.0 182.75 1440 1488 1520 1600 900 903 909 953 +hsync -vsync (114.2 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[ 17739.316] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 17739.316] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 17739.316] (II) intel(0): Modeline "1920x1080"x0.0 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
It would be nice to find out why the settings was being set to "0".
Last edited by Sne (2014-04-29 20:40:50)
Maybe you are looking for
-
My ipod touch will no longer download new apps after I updated via apple store.It freezes now when I attempt to download and blanks the app off entirely . How can I reverse the updates or correct the problem moving forward?
-
Need to install a second hard drive
Hi: I have only 347 MB left on my one and only 233 GB internal hard drive and I need another. How many hard drives can I install on my machine and where is the best place to go for instructions on how to do it?. Thanks Dan Page
-
How do I burn a home movie on my mac to dvd
How do I burn a home movie that I put in itunes to a dvd
-
I am not able to get the updated data in a CSV file through my DataServiceClient after building my DataService Project. The client picks the old value from the jar file which I have to rebuild after an update to the CSV file.. Is there any way I can
-
New WRT 160N is installed and connection to internet is OK when using ethernet cable. When want to look at "available wireless networks", the network that was setup on WRT160 does not show up in listing. Have tried everything. Security is WEP, wir