Trusted Connection Problem while creating a project in MDM WD Confg.Manager

Hi Experts,
We have the Netweaver instance (CE7.2) and MDM instance (MDM7.1SP07) installed in the same machine.
In our current scenario we are trying to create a projects in the MDM WD Configuration Manager for displaying the MDM records.
Things Done:-
1) Created allow.ip file and added the IP address of the server and also added the IP address of the Local Host (127.0.0.1).
2) Same user exists in the Netweaver and as well as in the MDM repository with same case.
3) Created a necessary MDM Destination.
4) After adding the entry in the allow.ip file, i have restarted the MDM server too.
Now when i create a project in the Config. Manager, after selecting the MDM destination i get a Trusted Connection error.
Cannot retrieve language list from repository [null] on server [null]. UserConnectionException: Can not connect with UserSessionContext to repository 'Inbox' on the server 'ctsinsapnw7'., Can not connect with UserSessionContext to repository 'Inbox' on the server 10.239.31.178'., Can not resolve JCA connection. Cause exception: Connection Failed: Cannot create JCA connection. Cause exception: Failed to create trusted connection to MDM server '10.239.31.178' for user 'mdmuser' because server is not defined as trusted, error code: ConnectionNotTrusted, com.sap.mdm.internal.protocol.manual.ServerException: The connection is not trusted
Is there anything to be done. Any help on resolving this will be very much appreciated.
Regards,
Prasanna Kumar R Y

Please make sure of below things...
1. Location of allow.ip file.
         Default location is exe folder where your MDM server executable are available.
2. If not using default location,
         Then check the entry of 'TrustedFiles Dir" property in mds.ini file.
3. Is server stops completely?
         Its very important to restart the server.
         Sometime console may show that the server is stopped but server might be running.
         If possible please check whether server stopped, using Console on different machines.
4. Check the log of MDM server while starting and stopping the MDM server.
         Please pest the log messages in this thread to help you better.

Similar Messages

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Problem: While creating a project in iDVD, it plays perfectly on the computer, but after burning the sound is off. Video soundtrack is not in the right place. HELP!

Have you checked out the topics at the right in the More Like This section?
OT

Problem while creating CAF project in NWDS workspace

Hi Experts,
We are facing a problem while creating CAF project in NWDS workspace. Even though we have tried in new workspace we are facing the issue. Find the below build error.
We are not getting any error when we build from CBS.
[javac] ERROR: C:\sap\test_VC_DC.jdi\0\DCs\test.com\ja\bl\journal\ejbmodule\_comp\src\com\test\ja\bl\journal\modeled\ModifyJournalLineItemRequestMessage.java:7: cannot find symbol
[javac] ERROR: symbol : class JournalLineItemDetail1
[javac] ERROR: location: package com.test.ja.cm.util.modeled
[javac] ERROR: import com.test.ja.cm.util.modeled.JournalLineItemDetail1;
when we expand com.test.ja.cm.util.modeled there is no file with name JournalLineItemDetail1 and the actual file exists is JournalLineItemDetail but we are not able to understand why 1 is appending to the file JournalLineItemDetail. Can somebody throw some light on this?
Regards,
Pradeep

Have you checked out the topics at the right in the More Like This section?
OT

Problems while creating a project from a war file...

Hi there, I created a new project in jDev 10.1.3 from a war file that contains a web site that originally ran on TomCat. The problem is that my web.xml file does not contain any information about the servlets that I have in the war file. So when I try running a servlet, I always get an error.
Is there a way to bypass the need to declare every single servlet I have in the web.xml file? If not, are there tools that exist that I could use to do this automatically?
Thanks

Hi,
You can try the following:
1. Give the fully qualified domain name of the DTR server host in NWDS Preferences->Development Configuration.
2. Check if your WAS and JDI are on a higher SP level. If yes then use the corresponding NWDS.
Regards,
Satyajit.

Problem while creating JCA connection to MDM server

Hi All,
I have restarted my mdm connector(com.sap.mdm.tech.connector) along with the applications related to Enrichment Controller. All applications restarted successfully. After that I tried accessing the URL
http://MDMSERVER:50000/MDM_EnrichmentController/WorkflowPolling?process=Monitor
but I am getting following exception in this page
Polling Repository
    name=Vijaybabu_Repo_on_MDMSERVER, status=No repository connection, error description=com.sap.mdm.net.ConnectionException: Problem while creating JCA connection to MDM server MDMSERVER
        Enrichment Request Threads
Could somebody help me pointing if something I have missed..
Thanks and Regards,
Manoj

hi Swarna,
I have verified the repository and found 0 fatal errors, 0 non-fatal erros and 0 warnings. I also checked the MDM Factory and Connector service is running fine.
The detailed exception is
Sep 2, 2008 12:49:40 PM com.sap.mdm.logging.MdmLogger error
SEVERE: Problem while creating JCA connection to MDM server 'KOLAPON'
com.sap.mdm.net.ConnectionException: Can not resolve JCA connection
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:119)
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnectionAccessor(JcaConnectionUtil.java:62)
     at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:70)
     at com.sap.mdm.internal.session.JcaConnectionAccessor.reserveConnection(JcaConnectionAccessor.java:59)
     at com.sap.mdm.repository.commands.GetRepositoryStatusCommand.execute(GetRepositoryStatusCommand.java:67)
     at com.sap.mdm.enrichment.common.ECAdminUtils.getRepositoryStatus(ECAdminUtils.java:125)
     at com.sap.mdm.enrichment.common.EnrichmentUtils.validateRepostiryConfiguration(EnrichmentUtils.java:889)
     at com.sap.mdm.enrichment.common.EnrichmentUtils.getCatalogManager(EnrichmentUtils.java:144)
     at com.sap.mdm.enrichment.workflowpolling.PollingThread.getCatalogManager(PollingThread.java:166)
     at com.sap.mdm.enrichment.workflowpolling.PollingThread.run(PollingThread.java:102)
Caused by: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
     at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:223)
     at com.sap.mdm.internal.session.JcaConnectionUtil.getJcaConnection(JcaConnectionUtil.java:108)
     ... 9 more
Caused by: com.sap.engine.services.connector.exceptions.BaseResourceException: "ConnectionManager" is closed. Possible reasons: 1) connector "MDM Factory" is stopped or not started, 2) Connector service is stopped or has not been started.
     at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:122)
     at com.sap.mdm.connector.connection.MdmConnectionFactory.getConnectionEx(MdmConnectionFactory.java:213)
     ... 10 more
Regards,
Manoj
Edited by: Manoj Kumar Nanda on Sep 2, 2008 9:21 AM

Service oriented architecture option missing while creating new project

I m using Java Studio Enterprise 8.1 n facing problem while creating a new project (not getting the option for SOA).........

SOA modules are not part of Sun Java Studio Enterprise 8.1 but are part of the enterprise pack for NetBeans 5.5.
JSE8.1 is a companion product to Java System Enterprise stack of servers.
For SOA development,
- please download NetBeans 5.5 from http://www.netbeans.org/
- Download enterprise pack from http://www.netbeans.org/products/enterprise/ and install it on top of NetBeans 5.5. (On netbeans.org you will also notice other packs that are avialbale as add-ons to NetBeans 5.5).
- check out the learning trails at http://www.netbeans.org/kb/trails/soa.html and the documentation set at http://www.netbeans.org/kb/55/entpack-index.html.

Problem while creating WBS elements using LSMW

Hello experts,
I am able to create Project Definitions using LSMW. (using recording)
But there is a problem while creating WBS elements.
Tcode CJ20 has table control and that will become problem for multiple rows (levels).
Can anyone suggest a solution to mass upload WBS elements?
Thanks for your valuable advice.

Hi,
Instead of using "BAPI_PROJECT_MAINTAIN", use following solution. We are using this solution and it is working pretty good.
If the WBS element is already created and you want to create one more with same data, first get the WBS related information using BAPI_PROJECT_GETINFO as you are doing currently.
I am using different sets of BAPIs to create project, create / change WBS element.
I use function module from Function group CJ2001 ( Project related BAPIs ), CJ2054 ( WBS related BAPIs ) and PS_BAPI ( pre/post processing BAPIs ). There are specific order in which you need to execute these BAPIs.
For example if you want to create / change the WBS element, the BAPIs sequence is:
<b>1. BAPI_PS_INITIALIZATION
2. BAPI_BUS2054_CREATE_MULTI ( to create WBS )
or
2. BAPI_BUS2054_CHANGE_MULTI ( to change WBS )
3. BAPI_PS_PRECOMMIT
4. BAPI_TRANSACTION_COMMIT</b>
Check the documentation of BAPI "BAPI_BUS2054_CREATE_MULTI " to see how these function modules work.
Let me know if you need further information.
Regards,
RS

While creating a project in Garage Band my sample tracks were cut short then overwritten in soundtrack pro. Any ideas why? and how to get my tracks back?

While creating a project in Garage Band 09 my sample tracks were being cut short- I then discovered they had been overwritten in soundtrack pro.
Any ideas why? and how to get my tracks back?
I never opened soundtrack pro to edit the track just Garage band....the track just mysteriously saved as half the track.
I am running Lion and I upgraded my Garage band to '11 hoping it would resolve the issue...it didn't. Now I can't find that tracks at all.
The 2 songs having the issue are titled Exotic Yearning and Reunion.
I am in the process of reinstalling the audio content from my discs. I just don't want to run into this again.
Any thoughts and help would be greatly appreciated!
Thanks!

After spending some time reinstalling the soundtrack pro 3 content I opened the full track called Reunion.
It showed back up in Garage Band.*It was the full track and wasn't chopped off until I dragged it onto the project. Then it showed up chopped.
Then I closed Garaged band and opened soundtrack pro 3....The song was again chopped off at the 1:33min mark
Very Frusterated...:(

Problem while Creating MVLOG with synonym in Oracle 9i:Is it an Oracle Bug?

Hi All,
I am facing a problem while Creating MVLOG with synonym in Oracle 9i but for 10G it is working fine. Is it an Oracle Bug? or i am missing something.
SQL> select * from v$version;
BANNER
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Product
PL/SQL Release 10.2.0.1.0 - Production
CORE    10.2.0.1.0      Production
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
2 REFRESH ON DEMAND
3 WITH PRIMARY KEY
4 AS
5 SELECT name,id
6 FROM syn_t;
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
2 WITH PRIMARY KEY
3   (name)
4    INCLUDING NEW VALUES;
Materialized view log created.
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE    9.2.0.6.0       Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL>
SQL> create table t ( name varchar2(20), id varchar2(1) primary key);
Table created.
SQL> create materialized view log on t;
Materialized view log created.
SQL> create public synonym syn_t for t;
Synonym created.
SQL> CREATE MATERIALIZED VIEW MV_t
REFRESH ON DEMAND
WITH PRIMARY KEY
AS
2    3    4    5 SELECT name,id
FROM syn_t;   6
Materialized view created.
SQL> CREATE MATERIALIZED VIEW LOG ON MV_t
WITH PRIMARY KEY
(name)
INCLUDING NEW VALUES; 2    3    4
CREATE MATERIALIZED VIEW LOG ON MV_t
ERROR at line 1:
ORA-12014: table 'MV_T' does not contain a primary key constraintRegards
Message was edited by:
Avinash Tripathi
null

Hi Nicloei,
Thanks for the reply. Actually i don't want any work around (Creating MVLOG on table rather than synonym is fine with me) . I just wanted to know it is actually an oracle bug or something else.
Regards
Avinash

Hi all, i'm new and facing a problem while creating a new file for Xcode. I can't select the box "with XIB for user interface" if the subclass is "UIViewController".this problem happen after i upgrade Xcode to 4.6 version.Appreciate for any help rendered.

Hi all, i'm new to Mac book & Xcode. I'm learning and facing problems while creating a new file for Xcode. Before i upgrade the software, i have no issue to create simple steps in apps. After upgrade Xcode to 4.6 version, i'm facing lot's of issue eg.
1) "the identity "iphone developer" doesn't match any valid certificate/ private key pair",
2) can't select the box "with XIB for user interface" if the subclass is "UIViewController"..
Appreciate for any help rendered.

Mikko777 wrote:So what is the best?
I wouldn't judge. I've been to Arch for a week, you know? But as said, it's VERY close to it.
What I dislike after a week is makepkg not handling dependencies automatically (which would be overhead, so probably not appropriate).
Mikko777 wrote:Also theres KDEmod for modular kde, dunno if its for 64 bits tho.
Don't actually need that as said ... I see no real benefit of having that other than not beeing a KDE user or having Gentoos useflags.
Mikko777 wrote:PS:You produce a lot of text and welcome smile
Yeah. Wonder why I'm still employed? So do I ...

Problem while creating URL iview (in EP7.0)

Hi,
I encountered a problem while creating URL iview (in EP7.0) as when I selected the iview template for creating the URL iview, the content area got displayed as
"No templates to display. You are not assigned to any existing templates."
please assist me in this regard.
Thanks,
Suri

Hi Manoj,
Thank you for your reply.
I am still getting the same messages even after creating the iview template in EP7.0
Created through:
content Admin --> portal content --> <folder>new --> iview --> seleting "Portal component - create an iView from a portal component contained in a deployed portal archive (PAR file)" <next> --> seleting "com.sap.portal.appintegrator.sap" <next> --> webdynpro <next> --> finish.
Open object for editing...--> Object is a Template to Yes.
Result :
content Admin --> portal content --> <folder>new --> iview --> seleting "iview template- create an iView from an existing iView template" <next> which displays the same message.
"No templates to display. You are not assigned to any existing templates."
Rgrds,
Suri.

Problem while creating sales order

Hi
   We are facing a problem while creating a sales order in R/3. The sales order number is getting generated. But we are not able to view the same in the backend meaning it is not there in the database. Any inputs would be of help.
regs
Steve

Hi everybody,
I've got a problem with this too. I use the BAPI_SALESORDER_CREATEFROMDAT2 with BAPI_TRANSACTION_COMMIT and the webdynpro shows me the document number created in R3 with a Success message. But when I go to R3 and try to display the created sales order, it doesn't exists. So... Maybe I'm doing something wrong with the BAPI_TRANSACTION_COMMIT. ¿Can anybody help me with this?
The code I use is this:
When the user pushes the SAVE button in the WebDynpro, this code executes:
    //@@begin onActionSave(ServerEvent)
     wdThis.wdGetSOCreaCustController().executeBapi_Salesorder_Createfromdat2();
     wdThis.wdGetSOCreaCustController().executeBapi_Transaction_Commit();
    //@@end
In the custom Controller I've got the code for those executions:
public void executeBapi_Salesorder_Createfromdat2( )
    //@@begin executeBapi_Salesorder_Createfromdat2()
     try {
          wdContext.currentBapi_Salesorder_Createfromdat2Element().modelObject().execute();
     catch (Exception ex) {
          wdComponentAPI.getMessageManager().reportException(ex.getMessage(), false);
     wdContext.nodeOutput().invalidate();
    //@@end
public void executeBapi_Transaction_Commit( )
     try {
          wdContext.currentBapi_Transaction_CommitElement().modelObject().execute();
     catch (Exception ex) {
          wdComponentAPI.getMessageManager().reportException(ex.getMessage(), false);
     wdContext.nodeOutput().invalidate();
    //@@end
¿Is something wrong? ¿Is something missing?

Problem while creating data transfer process

Hi friends
I am using BI 7.0 version.
I m getting a problem while creating dtp
After activating DTP and selecting the execute button, I am getting the following error message:
Request cannot be processed in its current state
Messg no : RSBK209
can anyone help me on this problem
Thank

Hi Deepthi,
Also check the error message(long text) and paste it here...
check if you are either creating a "second" Delta DTP ( if an existing Delta DTP exists, then system will not allow you create a second DTP) and will throw an "overlapping" error
Hope this helps
Thanks
Kalyan

Problem while creating xml with cdata section

Hi,
I am facing problem while creating xml with cdata section in it. I am using Oracle 10.1.0.4.0 I am writing a stored procedure which accepts a set of input parameters and creates a xml document from them. The code snippet is as follows:
select xmlelement("DOCUMENTS",
xmlagg
(xmlelement
("DOCUMENT",
xmlforest
(m.document_name_txt as "DOCUMENT_NAME_TXT",
m.document_type_cd as "DOCUMENT_TYPE_CD",
'<![cdata[' || m.document_clob_data || ']]>' as "DOCUMENT_CLOB_DATA"
) from table(cast(msg_clob_data_arr as DOCUMENT_CLOB_TBL))m;
msg_clob_data_arr is an input parameter to procedure and DOCUMENT_CLOB_TBL is a pl/sql table of an object containing 3 attributes: first 2 being varchar2 and the 3rd one as CLOB. The xml document this query is generating is as follows:
<DOCUMENTS>
<DOCUMENT>
<DOCUMENT_NAME_TXT>TestName</DOCUMENT_NAME_TXT>
<DOCUMENT_TYPE_CD>BLOB</DOCUMENT_TYPE_CD>
<DOCUMENT_CLOB_DATA>
<![cdata[123456789012345678901234567890123456789012]]>
</DOCUMENT_CLOB_DATA>
</DOCUMENT>
</DOCUMENTS>
The problem is instead of <![cdata[....]]> xmlforest query is encoding everything to give < for cdata tag. How can I overcome this? Please help.

SQL> create or replace function XMLCDATA_10103 (elementName varchar2,
2                                             cdataValue varchar2)
3 return xmltype deterministic
4 as
5 begin
6     return xmltype('<' || elementName || '><![CDATA[' || cdataValue || ']]>
7 end;
8 /
Function created.
SQL> select xmlelement
2         (
3            "Row",
4            xmlcdata_10103('Junk','&<>!%$#&%*&$'),
5            xmlcdata_10103('Name',ENAME),
6            xmlelement("EMPID", EMPNO)
7         ).extract('/*')
8* from emp
SQL> /
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SMITH]]></Name>
<EMPID>7369</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ALLEN]]></Name>
<EMPID>7499</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[WARD]]></Name>
<EMPID>7521</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JONES]]></Name>
<EMPID>7566</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MARTIN]]></Name>
<EMPID>7654</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[BLAKE]]></Name>
<EMPID>7698</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[CLARK]]></Name>
<EMPID>7782</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[SCOTT]]></Name>
<EMPID>7788</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[KING]]></Name>
<EMPID>7839</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[TURNER]]></Name>
<EMPID>7844</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[ADAMS]]></Name>
<EMPID>7876</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[JAMES]]></Name>
<EMPID>7900</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[FORD]]></Name>
<EMPID>7902</EMPID>
</Row>
<Row>
<Junk><![CDATA[&<>!%$#&%*&$]]></Junk>
<Name><![CDATA[MILLER]]></Name>
<EMPID>7934</EMPID>
</Row>
14 rows selected.
SQL>

Problem while creating Item Data in OCA application

Hello Experts!
I am creating a PDA application (OCA) for NW7.1.
I am facing problem while creating Sales Order. I can create the Header structure. But when I Create the corresponding item structure for the header , the items are not getting created. After Sync I can only see the header structure in the middleware.
I am using the following code to create the header and item.
OrderCreateDocType header = model.createOrderCreateDocType();
header.setRefdoctype("41001180");
header.setDocType("ZRRJ");
header.setSalesOrg("AND");
wdContext.nodeOrderCreateDocType().bind(Collections.singleton(header));
OcaRoot.getInstance().commit();
wdContext.nodeOrderCreateDocType().setLeadSelection(0);
header=(OrderCreateDocType)wdContext.nodeOrderCreateDocType().getCurrentElement().model();
OrderCreateOrderItemsIn items = header.createNewOrderItemsIns();
long item = new Long("000010").longValue();
items.setItmNumber(item);
items.setMaterial("MMKT090114");
items.setPlant("ANDP");
items.setTargetQty(new BigDecimal(7));
items.setTargetQu("IT");
header.setOrderItemsIns(Collections.singleton(items));
OcaRoot.getInstance().commit();
Am I missing out on step.
Reply Awaited
Regards
Priya Ghosh

Hello Priya
in your case as the DOs are of upload only type, you are not able to create a
child on an already created header, because updates are not allowed for upload only DOs.
So in this case you first have to create an instance of the header first and then create an item. And only after this call a commit on the model
Best Regards
Vaidehi

Trusted Connection Problem while creating a project in MDM WD Confg.Manager

Similar Messages

Maybe you are looking for