Trusted RFC: "jumping to PRD system from DEV"

Hallo!
I have the following question regarding the Trusted RFC generally in SOLMAN area and better especially within ChaRM.
We have SOLMAN and 3 satellite systems DEV, QAS and PRD.
When we generate Trusted RFC connections from SOLMAN to these satellite systems, we become scared about the following scenario:
A user accesses to DEV system and goes via Trusted RFC to SOLMAN.
From SOLMAN he chooses the Trusted RFC to PRD system and goes into PRD system.
The question:
How can this identification gap/problem be solved?
Thank you very much indeed!
H. Thomasson

Holger,
First of all the user that tries to launch the TRUSTED RFC needs to have an active user in the satellite system he/she tries to reach.
Secondly, this user needs to have the authorization object S_RFCACL assigned to its user.
You can manually change this TRUSTED RFC to 'Logon Screen' if you like.
Roel

Similar Messages

Trusted RFC: "jumping to PRD system from DEV via SOLMAN"

Hallo!
I have the following question regarding the Trusted RFC generally in SOLMAN area and better especially within ChaRM.
We have SOLMAN and 3 satellite systems DEV, QAS and PRD.
When we generate Trusted RFC connections from SOLMAN to these satellite systems, we become scared about the following scenario:
A user accesses to DEV system and goes via Trusted RFC to SOLMAN.
From SOLMAN he chooses the Trusted RFC to PRD system and goes into PRD system.
The question:
How can this identification gap/problem be solved?
Thank you very much indeed!
H. Thomasson

Hi Thomasson,
You can restrict the access of your solman system from your DEV system.
Disable the trusted relationship in the RFC that points to Solman from Dev system.
Hope this helps.
Regards,
Kiran.

How to call a RFC of a remote system from an ABAP webdynpro component

Dear Experts,
I am a newbie in ABAP Webdynpro.
I am working on a requirement where I have a webdynpro component on ECC system.I need to call a RFC located on CRM system from my webdynpro component on the ECC system.
How do I do that ?? Please help.
Regards,
Mamai.

Calling RFC from some other system is same as local except the difference is that you have to give destination name while calling.
And the regarding the method of calling it depends on your FM.
if it is big RFC with complex structure, you can create the service call for it with destination given as RFC desitination.
if it is simple straight forward RFC you can directly call it.
for creating RFC service call call use this method
1. Starting the Wizard
To start the wizard, position the cursor on the Web Dynpro component to be edited in the object list at the left margin of the
workbench window. Open its context menu and choose the entry Create->Service Call. The wizard is started and leads you
through the creation process.
Press Continue.
2. Choice of Controller
On the second dialog window of the wizard, you can choose whether the service call is to be embedded in an existing
controller or whether a new controller is to be created for this purpose. Service calls can only always be embedded in
global controllers u2013 that is, in the component controller or in additionally created custom controllers. It is not possible, to
embed service calls in view controllers.
a. Select radio button Use Existent Controller
b. Do not change the default entry for component: <CC name>
c. Enter for controller COMPONENTCONTROLLER
d. Press Continue.
3. Service Type and Service Selection
a. You now select, which service type should be used for this service call. Select radio button Function Module. Fill the
destination here. Press Continue.
b. Select the service: for Function Module enter <RFC name>. Press Continue.
4. The Required Methods and Context Elements
On the two subsequent dialog windows, default values are listed for giving names to the context nodes and attributes
required by the service call as well as to the required methods. The proposed names are based on the names of the
embedded service, but you can change them as required. However, heed the respective notes in the corresponding dialog
box.
a. Adapt Context: Select from Nodes/Attributes . Press Continue.
b. Specify Method Name: leave all entries as provided: Component: Controller: COMPONENTCONTROLLER Method: EXCUTE_ Press Continue.
5. Completing the Choice
When you have confirmed the last dialog box, the generation is triggered. Afterwards you now have the required methods
and contexts at your disposal for using them within your Web Dynpro component.
or if you want to call directly the use the call statement with destination

Minimum Trusted RFC's for productive system

Hi!
We have very strict requirements dealing with set up of Trusted RFC for productive system for ChaRM approach in SOLMAN.
Can some one tell me which Trusted RFC's and users for the productive system do I need?
a) Trusted RFC is not mandatory for the productive system
b) Trusted RFC only in productive system, client: 000, users: 1 communication user and 1Dialog user
c) Trusted RFC in productive system for each client with users...
Thank you very much!
H. Thomasson

Create the function modules in SE37 and set the remote-enabled flag in the attributes section. Then import them into XI.
Create a custom Z table through SE11 on each system to store any data, and the code in each function module would reference it. (Either that or just hard-code everything)
In short yes it can be done through SE37, no you don't need SE38.
I think you're talking about function groups which is a container for the function module. You can do everything through SE37 if you use the Goto->Function Groups-> Create Group option and give it the same name as your Function Module.

Launch a RFC in a SAP system from Redwood CPS

Hi,
How can I launch a rfc in a SAP system from Redwood ?
Ex : in SE37, the function DATE_GET_WEEK, with a date (DD.MM.YYYY) as input parameter returns the corresponding week (YYYYWW)
Regards.

Hi,
SAP CPS uses an RFC to communicate with a target SAP system via the XBP interface so that Jobs can be executed. The CPS executable only knows of the calls that are appropriate to that interface or function modules created when CPS transports are loaded. If there was an RFC type interface that exposed your function to an external executable then of course CPS could execute the executable.
Regards,
Simon

LSMW - Exporting the Object to PRD/QA System from DEV System

Hi,
I need to export the LSMW Object created/tested in DEV System to QA/PRD System. Can you please suggest me a solution.
I Appreciate Your Help.
Thanks,
Kannan.

There are two ways of Transporting for this.
Goto the LSMW Transaction
1)Extras>Export Projects>(Give the Project name)
In next screen(Choose what subproject, routines, etc.. you wan to copy then, Export Rules-->Export((Will prompt for file name)
A text file will be downloaded.
In the Target System
Goto LSMW Extras-->Import Projects and give the text file which was downloaded.
2)Extras-->Generate Change Request
Assign a change request which is basically a transport request and you can then get this transported from one system to another through the basis route.

Changing Business Systems from Dev to QA

I am trying to transport Integration Directory (Configuration) objects from DEV to QA. Is there a way that I can define my business systems (or something else) so that when I import my ID objects into QA I do not have to go into the Communication Channels to change the sender(s) and receiver(s) of the interface from DEV business systems to QA business systems?

Hi Kirk,
I have not noticed this much, so I am bit doubtful.
It MAY be possible with below conditions
1) If you use CMS and have your transport groups enabled in SLD (for QA, Prod equivalent of Dev)
2) you use the same name for the receiver & sender adapters (common names across scenarios & servers)
3) you do the transport for the SECOND time
what i mean as second time is, suppose there is a scenario to the same business system and you are using a RFC adapter, (which was already configured for someother scenario in your QA)
with all these things, you may anyway have to ACTIVATE (but not configure) after the transports.
Hope this helps.
Regards
Vishnu

Error while exporting/transporting the Business system from Dev to Quality

Hi,
We are getting the following error whil exporting/trsnporting the Business system from development(SLD) env to quality(SLD) environment. The error is
404 Not Found
The requested resource does not exist.
Details: Go to main page of this application!
We have followed the following procedure to export :
1. opened the business system.
2. Clicked on export option
3. tried to download
then we got the above error message.
Please provide your precious inputs to resove our problem.
Thanks
Ramesh

Go through the following links for transporting XI objects.
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
ere's a good link for what you are looking.
Re: Transport design and configuration objects
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Pls reward if useful

Preparing QA system from DEV system

We are currently working on a SRM Project and our development server is readt now. We are planning to now move to Quality Server. Can anybody tell me the stratergy to shift from Development server to Quality server. Also In development system we have created logical system which referes to backend R/3 system. Now when we are moving to Quality system it will refer to different R/3 backend system. So should we copy CR related to creation of logical system or should we once again create logical system. Can some body guide on this.
Thansk in advance

Hi,
When you copy (using transporting objects) your development system to QA system, you need to check the RFC and other logical system settings and define accordingly.
Though you can copy your org. structure please verify the attributes and reset the same as required.
You have to do replication of your plants, vendors and material master from the concerned backend sepearately for this system.
Also you have to generate partner profiles and distribution models separately for this system based on your backend logical system.
Hope this makes you more clear. Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

Creating RFC Destination For UNICODE system From NON-UNICODE system

hi
how can i create RFC Destination For UNICODE system( XI ) From NON-UNICODE (R/3) system.
thanks and regards
Mithlesh Kumar Jha

Hi,
Check these blogs , Hope u would be getting some idea
<b>/people/thomas.jung3/blog/2004/06/24/bsp-150-a-developer146s-journal-part-v-xml-for-rfcs
/people/thomas.jung3/blog/2004/11/15/bsp-150-a-developer146s-journal-part-xiii-developing-abap-webservices
/people/sap.user72/blog/2004/06/19/how-i-started-with-sap-web-development</b>
Regards,
Sridhar Reddy

Trusted RFC for two managed systems where SID is identical

Hi
I fall into strange situation, We have maintenance landscape & project landscape where SIDs are same for D & Q Systems.
Now I am trying to setup System Monitoring & EWA etc from Solution manager, I cant create Trust Relationship between the solution manager & managed system where SID is same.
This is not about defining system in SMSY.
Any help is appreciated.
Thanks
Rakesh

Hello,
If the SID's are under different installation numbers then this should be fine. If they are under the same installation number, how can Solution Manager tell the difference between the systems, and know which system to trust? They become identical entities if they share the same installation number and SID.
I hope this helps.
Regards,
Paul

How to tranport XI config from DEV to QAS or PRD

Dear Sir,
We would like to know How to tranport XI config from DEV to QAS or PRD
Thank you and best regards,
Vimol

Hi,
Check some links on transporting Objects.
Transporting IR,ID Objects using File System
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

Transporting SLD objects from DEV to PROD

Hi,
I need to move My SLD objects from DEV to PROD. There is no QA. Also SLD is not common across DEV and PROD.
Thanks!!
Regards,
Miten.

Hi,
How to handle SLD for Tranporting Dev to Quality ser
https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0fa2c490-0201-0010-61b4-df12869c4753
Transporting XI from DEV to QA
Transporting XI from DEV to QA
using CMS system. in XI
1. /people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
2. /people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
3. /people/sap.india5/blog/2005/11/28/xi-software-logistics-solution-iii-cms
4. /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi --> Overview of Transition from Dev to QA in XI
5. /people/sravya.talanki2/blog/2005/12/20/inconsistencies-while-transporting-rfc-objects-from-dev-to-qa-150-sp12
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/content.htm --> Transporting XI Objects
http://help.sap.com/saphelp_nw04/helpdata/en/ef/a21e3e0987760be10000000a114084/content .htm --> Configuring Groups and Transport Targets
Look into this blog for how to export / improt IR and ID objects,
/people/sap.india5/blog/2005/11/09/xi-software-logistics-ii-overview
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Please go through these links which actualy show you how to configure CMS and also gives you all information regarding it.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f5d790-0201-0010-2984-ff72d822b109
http://help.sap.com/saphelp_nw04/helpdata/en/de/a4214174abef23e10000000a155106/content.htm
/people/daniel.wirbser/blog/2005/10/27/tcsfilecreateexception--error-while-assembly-of-software-components-in-nwdi
http://help.sap.com/saphelp_nw04/helpdata/en/f6/719a2172f74b67b150612a7cd3b7df/content.htm
http://www.sap-hefte.de/download/dateien/964/074_lesesprobe.pdf
Here are some blogs.
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation
Re: Moving project from Dev to QA
Error while exporting/transporting the Business system from Dev to Quality
Transporting the scenario frm Dev Server to PRD Server
transporting data from Dev to quality using CMS
Regards,
Phani
Reward points if Helpful

Trusted RFC connection Problem

Hello,
Trusted RFC connection between two systems when the results are negative. The error we get is "You Are Not authorized to logon to the target system (error code 1)." But everything looks smooth (kernel, logfiles, etc.).. S_rfc users and has s_rfcacl objects. Where do you think could be problem?
RFC trace log files;
dev_rfc0
Trace file opened at 20100503 232709 GTB Daylight Time, SAP-REL 700,0,236 R
======> You are not authorized to logon to the target system (error code 1).
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFCPING
User: P0326 (Client: 100)
Destination: RFC001 (handle: 2, 21766343, {3CF256DF-FE74-F105-BF85-000C29E0B2F6}
dev_rfc1
Trace file opened at 20100503 233011 GTB Daylight Time, SAP-REL 700,0,236 R
======> No authorization to logon as trusted system (Trusted RC=1).
ABAP Programm: SAPLSYST (Transaction: SM59)
Called function module: ABAP4_LEAVE_TO_TRANSACTION
User: P0326 (Client: 100)
Destination: RFC001 (handle: 2, 21951359, {A7F256DF-F7BE-F119-BF85-000C29E0B2F6}
Trace file opened at 20100503 233115 GTB Daylight Time, SAP-REL 700,0,236 R
======> Name or password is incorrect (repeat logon)
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFCPING
User: P0326 (Client: 100)
Destination: RFC001 (handle: 2, 22021687, {D1F256DF-90D2-F15E-BF85-000C29E0B2F6}
Trace file opened at 20100503 233127 GTB Daylight Time, SAP-REL 700,0,236 R
======> You are not authorized to logon to the target system (error code 1).
ABAP Programm: RSRFCPIN (Transaction: SM59)
Called function module: RFCPING
User: P0326 (Client: 100)
Destination: RFC001 (handle: 2, 22034437, {D8F256DF-78D3-F1BE-BF85-000C29E0B2F6}
Regards
ismail

Hi,
In addition to the auth object, First make the entry in SMT1 with the normal RFC here the rfc should not be enabled as trusted.
Then create an entry in the target system as well, one the entries are made in tcode SMT1 in both the systems, then enable both the RFC's as trusted RFC it will work fine then.
Regards,
Vamshi.

How to move PI objects in IR and ID from DEV to QAS

Hi experts,
         I am new to PI and with lot of research and help from you all experts I could successfully create a scenario from XML to CSV conversion. I created message interface, interface mapping objects etc.. in "Integration Repository" and conficguration scenario, sender and receiver communication channels etc. in "Integration directory". Everything is working fine in DEV and now I want to move all these to QAS. I went through some documents on SDN and it was talking about XI track and CTS and I am so new to all these, I am not sure how to get started. Could someone please let me know the procedure of moving PI objects from DEV to QAS?
Thanks.
--Mithun

Not to Worry Mithun Da!
There are two ways to transport ID and IR Object to transport .
1. CTS + : Totally automated Way .,
2. .tpz : Manual Lagacy Import / Import way .
Now . Steps .are :
There are two types of transport mechanisms in XI/PI.
1.      File Transport System.
Files are imported and exported into SAP XI OS Level for Development and Quality Server,
This Process is risky as there is no automated system and there is no track record of imported or Exported Files,
as in this syetem exported files are transported to QA System from DEV System.
file Extension in file transport System : - .tpz
2.     Through CTMS(Change Transport Managment System).
GUI Based tool, Installed on SAP XI BOX, This system provides the automated transport system , which keep tracks of transported Objects and Failed objects.
There are initial level efforts to set up transport system.
Transport Procedure for Various System :-
DESIGN OBJECTS ---> (ENTERPRISE SERVICE REPSITORY OBJECTS) -
> INTEGRATION BUILDER.
Step -I
1. Select NameSpace to trasport.
2. Right Click on NameSpace to Transport.
3. Select Export Option.
4. Check or Select the Software Component Version.
5. Check the Mode of transport.
CTS MOde:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF INDIVIDUAL NAMESPACE.
5.2        Select Transort request.
5.3      Finish the Process.
TRANSPORT USING FILE SYSTEM:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF INDIVIDUAL NAMESPACE.
5.2      Finish the Process.
Step II
1. GO TO TOOLS OPTION IN MENU BAR
2. OPEN CTS TRANSPORT ORGANIZER
3. Select the request to Release.
4. Press Button Release.
Step III( Steps to be Perform at Target System).
1. Execute Transection Code STMS.
2. Check your Transport Request Number.
3. Focus on that Trasport Request Number Through Mouse.
4. Now Import The Transport Request on Specific client of Target System.
5.Click Ok.
FINAL :- NOw on Quality Server all Transported Objects Need to be activated.
CONFIGURATION OBJECTS ---> (INTEGRATION DIRECTORY) -
> INTEGRATION BUILDER.
Step -I
1. Select Configuration Scenario to trasport.
2. Right Click on Configuration Scenario to Transport.
3. Select Export Option.
4. Check or Select the Configuration Scenario.
5. Check the Mode of transport.
CTS MOde:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF Selected Scenario.
5.2        Select Transort request.
5.3      Finish the Process.
TRANSPORT USING FILE SYSTEM:-
5.1     Select a required type of Object Set:
     IN OUR CASE: ALL OBJECT OF Selected Scenario.
5.2      Finish the Process.
Step II
1. GO TO TOOLS OPTION IN MENU BAR
2. OPEN CTS TRANSPORT ORGANIZER
3. Select the request to Release.
4. Press Button Release.
Step III( Steps to be Perform at Target System).
1. Execute Transection Code STMS.
2. Check your Transport Request Number.
3. Focus on that Trasport Request Number Through Mouse.
4. Now Import The Transport Request on Specific client of Target System.
5.Click Ok.
FINAL :- NOw on Quality Server all Transported Objects Need to be activated( CHANGE OBJECTS).

Trusted RFC: "jumping to PRD system from DEV"

Similar Messages

Maybe you are looking for