Trusted Sites Not appearing in Windows 7 & IE10

We have GPO setup to configure IE10. This has been working great until recently (We cant find what has changed to cause this) . When checking IE10 Internet Security settings the trusted sites list is now empty. It used to be there . We have done some investigation
work and this only happens to users creating a new local profile on a workstation. So users with existing profiles do not experience this issue. GPO is being applied - have run RSOP and all looks good from that. Any help would be very greatful.

How are you setting the trusted sites with Group Policy? Check out this guide - it might help:
http://deployhappiness.com/managing-internet-explorer-trusted-sites-with-group-policy/
Also - do you see any errors in event viewer?
If my answer helped you, check out my blog:
Deploy Happiness

Similar Messages

Hi, want to download movie from a site but appears a window which i tried many time cant close co ...

hi, want to download movie from a site but appears a window which i tried many time cant close I cant do anyting its in middle i do all efford to close it but cant it show finder window .

Right click and chose save as

Custom painting not appearing on Windows XP JVM

I have an applet that has a JComponent subclass with the following
method:
public void paintComponent(Graphics g)
if(fBackgroundImage != null)
    fBackgroundImage.paintIcon(this, g, 0, 0);
}where fBackgrounImage is a ImageIcon. Added to this component is
another JComponent subclass, which sits in the middle of the
original JComponent. The latter has this method:
public void paintComponent(Graphics g)
Graphics2D g2 = (Graphics2D)this.getGraphics();
if(fHighQuality)
    g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING,
RenderingHints.VALUE_ANTIALIAS_ON);
if(fBackgroundImage != null)
    g2.drawImage(fBackgroundImage,
                 0,
                 0,
                 getWidth(),
                 getHeight(),
                 0,
                 0,
                 fBackgroundImage.getWidth(null),
                 fBackgroundImage.getHeight(null),
                 null);
for(int i=0; i<fPathsX.size(); i++)
    int[] pathX     = (int[])fPathsX.elementAt(i);
    int[] pathY     = (int[])fPathsY.elementAt(i);
    int pathLength =
((Integer)fPathLengths.elementAt(i)).intValue();
    int colour      = ((Integer)fColours.elementAt(i)).intValue();
    if(colour == COLOUR_WHITE)
      g2.setStroke(new BasicStroke(WIDTH_ERASER*fBaseLineSize));
    else
      g2.setStroke(new BasicStroke(WIDTH_PEN*fBaseLineSize));
    g2.setColor(fColourPalette[colour]);
    g2.drawPolyline(pathX, pathY, pathLength);
if(fPathIndex > 0)
    if(fTool == TOOL_ERASER)
      g2.setStroke(new BasicStroke(WIDTH_ERASER*fBaseLineSize));
      g2.setColor(Color.WHITE);
    else
      g2.setStroke(new BasicStroke(WIDTH_PEN*fBaseLineSize));
      g2.setColor(fColourPalette[fColour]);
    g2.drawPolyline(fCurrentPathX, fCurrentPathY, fPathIndex);
}(fBackgroundImage in this component is actually a BufferedImage)
On Mac OS X, this all works beautifully - the parent component draws
the background image, and the child component draws its bits on top.
On Windows however, the child does not appear. It flickers to
visible while dragging the mouse (most likely because the mousedragged method has a call to the child's repaint() method) but as soon as you stop drawing the child disappears again.
How can I ensure that the child will be drawn on top of the parent?

I didn't think of the QT version. I remember that
when I exported the QT it did use the H.264 codec. I
will try and re export the movies using MPEG-4 and
let you know.
MPEG-4 won't look as good as H.264 and won't be as small a file either. But it works.
Any ideas why the container box is not being rendeed
in the correct place on the page?
You mean the template "frame" that is supposed to border the movie window? I don't know what happened....maybe if I could take a peek at your page?
Does XP have QT pre installed? or would it be
advisable to offer a link to download to view the
content for non mac viewers (which I anticipate).
Nope. No QuickTime preinstalled on XP. It would be a nice touch to offer a link to download QT. You can use http://www.quicktime.com I think.
Would it be more compatable to use flash? if so how
would I go about it.
Flash definitely has its advantages. I have actually pretty much switched over to uploading my videos to Google and then letting them convert it to flash and stream it on my webpage. It takes a little bit of HTML editing, but it's not too bad. And the quality is pretty good too for the size of the movie window. If I had to do that with MPEG-4, then it would have been a huge file probably. Here are some examples from my site:
http://funhouse.dirtdoog.com <==click on the baby with the McDonald's bag
http://web.mac.com/jwtseng/iWeb/kate/MyWorld/6C457884-51D7-4643-9DA8-AB149E6B544 F.html
http://web.mac.com/jwtseng/iWeb/kate/MyWorld/E3BD3E8E-FD71-4C44-AD4D-3F562413FFC C.html
http://web.mac.com/jwtseng/iWeb/kate/MyWorld/24937660-2AE2-41D1-A81C-D12B99AC23E 7.html

When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes. I tried the reset but it didn't work. how can i fix this?

I bough a 4g Ipod nano 2nd gen for my cousins birthday. When i plug it into my computer it charges but does not show up in windows or itunes. I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting. Could the wire have something to do with it or is there a bigger problem here?

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Ipod mini does not appear in windows explorer or I tunes

Two days ago, I purchased an IPod mini for my daughter to take to college. Directions seemed certainly clear enough to connect.
Unfortunately, I have spent two days trying to transfer music from itunes, on three different computers (two of of which are about a year old) utilizing at various times all of the USB ports available for use between the three computers.
I have updated windows and the Itunes and Ipod updater software for all of the computers.
I have reset and restored the Ipod numerous times.
On my laptop, the Ipod appears in Windows explorer but not under "Source" in Itunes. On another computer (a 3 year old Dell) it neither appears in Itunes or Windows explorer.
AT no time, does ITUNES automatically start when it is connected through a USB port.
Needless to say, I am frustrated and sorely disappointed that connecting this has become so difficult.
Before returning and giving up on the Apple, I thought I would try this discussion forum to see if anyone had any additional ideas.
Thanks!

Thanks for your recommendation! I did, at one point, try to get the apple logo to appear but it never did and I'm not sure why.
Meanwhile, we exchanged it for a different one.
This time it worked but only after the shop I bought it from updated the software for us.
The ipod, however, still doesn't automatically start itunes when it is connected; for some reason. Itunes has to be started, and the the Ipod needs to be connected. After a short while, it then appears under source and songs can be downloaded.
But, after all that, it now works!!!!!

CD/DVD drive does not appear in Windows 8

My CD/DVD drive no longer appears in Windows Explorer in Windows 8.1 on my HP Pavillion Slimline 400-034 Desktop PC. The drive spins upon boot. I've tried the Microsoft Window 8 troubleshooting with no luck. I'd like to try the HP troubleshooting which requires BIOS access upon boot, but pressing F10 during boot does not get me to the BIOS but instead loads Windows normally. Any suggestions to at least help me get to the BIOS?
This question was solved.
View Solution.

Hello @weatherdoc,
I understand that your HP Pavillion Slimline 400-034 Desktop PC does not detect your Optical Drive and when you tried the HP Support document: CD/DVD Drive Is Not Detected (Windows 8) and when you get to the step that requires you to enter the BIO tapping F10 when the computer first begins to start up will not open the BIOS as it should. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Site Not Appearing When I Open iWeb 09

When I open iWeb 09 my web site usually appears. Now the application opens but the site does not. The inspector apears but nothing else. Under File I cannot open a new page or new site. Under library/application support/iweb the file named Domain is there. If I try to open that the same thing occurs.
Just before this started happening I would be able to open my site and on my blog page the main page opens and looks fine but the page with the individuals blogs as well as the archive page were blank. The program crashed a couple of times and now nothing appears as I have noted above.
If you have any thoughts on what is happening or has happened and what I can do about it please respond. Thanks in advance.
Brent

Thanks for the link. Deleting the preferences file worked. Now I get my site back, however the problem with the blog remains.
I have the blog as a second site in iweb. It has been working fine as I have been creating it (haven't published this yet) but now only the Blog page is visible. The Entries page and the Archive page are blank white. When I went to try to publish it just now it came back with an error and unable to publish.
Any thoughts on this remaining concern? Thanks.
Brent

Keywords not appearing in Windows

A quick google search has revealed that this is a pretty common problem - Keywords created in Aperture don't show up in Windows programs. But the why of it is a little difficult to wrap my brain around.
Here's the workflow: I'm scanning a bunch of images into jpg format, correcting and tagging them in Aperture, then exporting back to jpg format.
From what I understand (please check me on this), Aperture stores keywords in IPTC format, which is baked into the jpg when the versions are exported. Since this is a newer format (?) and Microsoft doesn't follow anyone's standards but their own, the IPTC metadata is not visible in Windows Explorer or in Windows-based software. Am I right so far?
When I do this same workflow in Lightroom, the metadata shows up fine. As I understand it, that's because Lightroom saves the metadata in XMP format, which is visible in Windows? Or is it saving to EXIF format? I read somewhere that XMP metadata can only be saved as a separate file (a sidecar). Is that true or is it also baked into the jpg?
Here's the bottom line: Aperture has facial recognition, Lightroom does not. So I would like to use Aperture and have my keywords recognized anywhere by anything. What is the solution? Has anyone developed some metadata cross-stamping software that works? (I tried downloading one made for Windows but it didn't work on Windows 7.) Or is there a plug-in I can use with Aperture to solve the problem?
And this may not be a question that can be answered in this forum, but when I add a keyword in Lightroom, how is it being saved that allows me to see it in Windows? Is that XMP or EXIF?
I've been researching this for two days and have learned just enough to leave me utterly baffled. I appreciate any help y'all can offer.

UPDATE
I ran some additional tests on Windows 7 and it appears that Aperture keywords don't show up in ANY of the following:
- Windows Explorer
- Microsoft Office Picture Manager
- Windows Live Photo Gallery
Notice a common denominator? All Microsoft software.
Picasa for Windows DOES, however, see the keywords (though it has many other problems).
Meanwhile, Lightroom keywords are recognized universally.
I looked at the metadata using ExifTool (what a handy app) and it appears that both Lightroom and Aperture are writing to IPTC, but neither is writing to XMP. That's not what I expected at all. So perhaps they're writing to different versions of IPTC? I can't tell what they're writing to - does Aperture write to IPTC-Core or IPTC-IIM? Whatever it is, Windows does not read it.
Anyone have any more info on how all this works?

Glossary Not Appearing in Windows 7 64 Bit

I have RH7 installed on XP. All is OK when I view the CHM file in XP. When I view the CHM file in W7 64 Bit, the glossary does not appear.
Do I need to install RH7 under W7 64 bit to get the glossary to work under W7 64 bit? If that is true, one issue is I have Office 2010 which RH7 doesn't support and I'm not in a position to upgrade to RH10.
Is there any way to keep RH7 installed on XP and generate the CHM file that shows the glossary under W7 64 bit?
Thank you.
Shawn

IIRC you’ll have to register the 64 bit dll for CHM viewing – search the forums; this issue has come up before

My Mac HD partition will not appear in Windows 8.1, how do I get read access in windows?

The Mac HD drive doesn't appear in Windows, even though it did some time ago (maybe a year ago?). Running 10.10.1
(was upgraded from Mavericks). Really wish it were there so I could read files off it! Thanks for the help.

saxboychair1 wrote:
Is there some way to fix this?
Rebuild MBR to match GPT information thus resetting the Hybrid MBR. Use defaults for other questions (like partition codes). The boot flags only impact Windows. The Bootability of OSX is EFI-based.
Sudo gdisk /dev/disk0
P (Print list of parts)
R (Recover)
H (chooses Hybrid)
Partitions numbers to be hybridized: 2 3 4
Y (Good for GRUB question)
N (part 2 boot flag)
N (part 3 boot flag)
Y (part 4 boot flag, make NTFS bootable partition)
W (Write the new MBR)
Y (Yes! write the new MBR)
Reboot
Test and verify.

Context Menu (or right button click) does not appear menu-window

The context menu does not appear in some browser sections.
If I run browser in safe mode it works without problem.
I've tried to reinstall firefox, after uninstall I also manualy deleted all rest hidden and visible folders - did not help.
Also I tried restore to default mode - did not help.
Here I put screenshoot.
Regards.
//sorry for my eng

Yes, it helped. Thank you very much!
Kind regards.

Hello... i cant bwoser blospot on my browser .blogspot site not appearing on my broswer plz help

recent i added an custom domain on my blogspot site as www.allfreeebooks.net
but on my browser this site not showing as direct url . loading loading then spot that page .
i can access my blogspot account , can post too . but when i try to see my page on my browser not opening and cant see .
Note : with pagewash can see page . but direct with url my site cant see . and not opening .
sometimes can see for few min after then same problem
plz help me ...
one more .. not opening any blogspot site on my web browser. i have removed cookies , tried with everything .. but nothing happened .
plz help

If you previously used a different domain for that website then Firefox may still have old content in the cache.
Clear the cache and cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
You can remove all data stored in Firefox from a specific domain via "Forget About This Site" in the right-click context menu of an history entry ("History > Show All History" or "View > Sidebar > History") or via the about:permissions page.
Using "Forget About This Site" will remove all data stored in Firefox from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious and if you have a password or other data from that domain that you do not want to lose then make a note of those passwords and bookmarks.
You can't recover from this 'forget' unless you have a backup of the involved files.
It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

Name Of Site Not Appearing When Viewing Site In Browser

When I view my completed or nearly completed pages from the
site I am building in IE or Firefox, the heading at the top of the
browser says 'Untitle Document'. How can I get the name of the site
to appear instead?
Thanks!

quote:
Originally posted by:
Klayber
I just checked www.johndoe.com , you have a nice opening
there.
but the home.html you didnt upload yeat, did you?
you know if you just previewing it in your browser it will
always show in the address bar the path like C:\ etc.... but to
change the titles all you have to do is put the names in the title
field.
if you think this has nothing to do with what your question
was please just refrase your question than i might understand it
better.
Well, JohnDoe.com isn't actually my site. I just used it as
an example. (My site is www.BigMusicGeek.com) I didn't realize that
the path always showed when previewing the page in a browser. I am
painfully new at this, so some basic ideas just escape me. Now that
I have the title of the site appearing correctly in the browser, I
can get back to finishing the design of my home page.
Thanks!

Why does my site not appear correctly on other computers?????

I made a website for the gallery I manage. address is 12spsg.com
When making the site with CS4 it looked fine on both computers I was working on but now the left sidebar is appearing in the middle of the screen, the top menu bar is not all one row there are a few doubles, etc.
HELP!!!!!
Is there an EASY way to make my site "normal" on all comps and in all browsers?

First, validate your code by running your website through the following page:
http://validator.w3.org/
Next run your page through the CSS validator:
http://jigsaw.w3.org/css-validator/
Basically the second one will just tell you that you need to declare a width on any element that uses a float.
Also if you need help fixing a specific problem can you please post what browser and version the page looks bad in? Right now I see no discrepancies in either Firefox or Safari which leads me to believe what you are describing is probably only happening in IE. So if you could please state which version(s) of IE you are noticing the issues with.

AD services not appearing in Windows 2012 menu

Hi there
I'm building a virtual 2012 environment with separate machines for AD and WSUS.
I've then built another machine called Management. Using the Windows 2012 menu, I've added the 2 machines above as machines to manage however there is a problem.
It does appear to add them as on my left hand side of the Windows 2012 panel, it shows WSUS and AD DS. However the problem is that when I click on the Tools machine to access AD, it doesn't exist. My understanding is that once I add that machine
as a machine to manage, I should get all the management options?
I've pretty sure it's worked in the past...
Any ideas?
Note: My firewall is on
Many thanks

Hi all
I got this query answered on the Windows 2012 general page, located here:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/744f70f8-694b-4c6b-b0fc-6ce92e0f48a6/having-trouble-remotely-managing-other-windows-2012-servers?forum=winserver8gen
It seems I needed to add the Remote Management from the Features tab of the dashboard. I, mistakenly, was under the impression that by adding the servers to manage, it would automatically add the required Administration tool, depending on the server
role.
Thanks all for your replies and help.

Trusted Sites Not appearing in Windows 7 & IE10

Similar Messages

Maybe you are looking for