Trusted system after system refresh

I was wondering if theres an easy quick way to recreate the trusted system in SMSY after a system refresh or should I create the recreate the trusted system manually?
Regards
Juan

Juan,
recreating manually is in my opinion the only solution.
you can:
    - recreate the RFCs again starting from SolMan
    - only recreate SolMan as a trusted system in your satellite system
good luck!
Roel
Edited by: Roel Beckers on May 27, 2008 11:14 AM

Similar Messages

  • ChaRM in QA system after QA refresh with production

    Hi,
    After deploying ChaRM, if we refresh QA system with production server, would the projects be overwritten?
    or Is there a way to perform system refresh without affecting CTS projects in QA?
    Thanks and Regards,
    Jamuna Nithyanandam

    What do you mean with "Delta transports"? I assume, delta transports contain those objects which were not moved to production, only to QA, and therefore the are now missing in QA after system copy.
    CHaRM process supports to move all changes controlled into Production, by using normal corrections (transaction type SDMI). So there should no delta transport be required. If something was in QA and not on Production, when you perfromed the system copy, you can use test transport functionality, to re-import these missing transports into QA.
    Regards,
    Holger Slomka

  • Cube is still assigned to original system after system copy

    Hello Experts,
    After system copy (BW and ECC), some cubes are still assigned to the original system.
    Displaying the flow, the cube is assigned to the new system and the original one and the error message RSAR203 "Source system & (old one) does not exist" is araised.
    I see that RFC connexion with original system are still in the system (were not deleted by basis team).
    I have this problem only for cubes.
    Any idea how can i fix this issue?
    Thank you in advance.
    Edited by: SALHI Amal on Oct 13, 2011 11:37 AM

    HI,
    You can try the tcode 'bdls'. in this tcode you copy all tables to new source system.
    Regards,
    AleX

  • How to find old hostname remained in new system after system copy

    Hello all,
    Let me ask you about changing hostname during system copy. 
    I've finished homogeneous system copy.  I changed its hostname and did not change its SID. 
    I know we should check and modify RFC destination(SM59), logon group(SMLG), SAPconnect(SCOT), operation mode(SM04) and instance profiles after system copy with changing hostname. 
    But my customer also used hostname for variant.  I overlooked. 
    Then they require me to provide how to find old hostname in whole system ... 
    Do you have any good tools or idea?  Any advice would be appreciated.
    Best regards,
    Ikue

    Hi,
    If u have not deleted the inactive profiles in the tcode RZ10, you can find the old hostname in the instance profile.
    Also if u have not deleted the entries in the tables TPFET and TPFHT, u can find the old hostname here in these tables also.
    Regards,
    Varadharajan M

  • Table structure changed in testing system after system refresh.

    Hi Team,
    Recently we underwent a system refresh in Testing System where the Testing data is filled with Production data. But now we find that in one table some fields which we had deleted they are again found there. The version history of table is also gone. The table object was under testing in testing system and after which it was supposed to be transported to production. I believe System refresh only means refresh of data and it has nothing to do with table structure. Please correct me if I am wrong. Please also let me know what could be the reason of those changes in table if it is not System Refresh.
    Regards,
    Amit

    I believe System refresh only means refresh of data and it has nothing to do with table structure.
    Alas, you were wrong, after all table definition are data too, as program sources...
    You have to re-import every transport request which was not yet transported to production in your test system.
    Regards,
    Raymond

  • Myself system after System copy

    Hello,
    we have copied our PROD system(SLBWP200) to our DEV system(SLBWD200).
    We have executed BDLS tx. After this, in RSA1 the old myself system (SLBWP200) have been renamed to SLBWD200, but the icon show the system as an R/3 system, not as myself system.
    We have checked RSBASIDOC table and show this two entries:
    SLBWD200 SLBWD200 ACT ZSBD039 000 BD 3 620 .....
    SLBWD200 SLBWP200 ACT ZSAA002 000 AA M 620 ......
    Any idea?
    Regards. Angel.

    Which selection did u make ? Client dependent or client independent conversion tables ?
    Did you leave the Tables to be converted blank ?
    Reactivate all partner agreements that carry the new logical system name after renaming.
    Message was edited by: PSG

  • Changing Logical System after System Copy

    We just did a system copy of our Production system onto our QA system.  I created the new Logical Name (QR3) through BD54 but when I try to change it in SCC4, it will not allow me to. 
    Do I need to make this change through another transaction?
    thanks.
    Marie

    another way to change the logical system
    name is to run /nbdls with the system copy option.
    This will also create the logical system name
    and update the scc4 entry for you. As well
    as that it will change all reference to the old
    logical system name to the new one.
    This is especially important if your SAP system
    connects to others eg CRM, BW, APO etc.
    regards
    Tom

  • New Authorization Objects after system upgrade

    Hi All ,
    I require the list of all new Authorization Objects that have been added to the system after System Update.
    Regards
    Anthony D'souza

    Hi Jurjen Heeck ,
    see my previous post
    I did 'nt get this.
    SAP_NEW is your friend here
    does the SAP_NEW profile contains all the new authorization Objects.
    Regards,
    Anthony

  • Logical System Conversion after system refresh failed

    Hello,
    Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the  job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
    02/18/2009 16:09:33 Job started                                                                     00           516          S
    02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
    02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
    02/18/2009 16:10:19 Job finished                                                                    00           517          S
    When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
    Any suggestions on this?
    Thanks,
    Mahesh

    Hi ,
    Rerun the BDLS again as this took very little time.
    When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
    May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
    Thanks.

  • False backup / archive alerts after system refresh

    We have implemented CCMS on our systems. We recently refreshed our QTS system with a backup of production (PTD). CCMS is now sending alerts for backups and archives. It tells us that the backup and archive did never run.
    I checked DB12 and found that there is no data in DB12. This is probably due to the system refresh.
    Is there any extra post refresh step that we can do to prevent these false alerts (other than running a full online backup as post refresh step)? Is it possible to export the backup information (tables used by DB12) as pre refresh step and re-import them after the refresh?

    Kevin DK wrote:
    Will it create issues if we do not delete tables SDBAH and SDBAD during the refresh?
    No. BTW, tables are not to be deleted, just the table 'entries'.
    Thanks

  • Source System Problem after system refresh in RSA1 trx

    Hi,
    We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
    The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
    BI unknown in source system
    BI IDoc type ZSSB006 is not the same as source system IDoc type
    I performed following steps in R3 Test system after its system refresh:
    1. Created logcal system and created RFC.
    2. Created port in trx we21.
    3. Created partner profile in trx we20.
    4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
    5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
    After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
    I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
    Someone pls help me.
    Regards,
    Chintan

    Hi
           Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
    RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
    Check the the note for further  info...
    Note 886102 - System Landscape Copy for SAP BW and NW BI
    Hope halp you...
    Regards,
    Sureshram

  • Source System Problem after System Refresh

    Hi,
    We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
    The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
    BI unknown in source system
    BI IDoc type ZSSB006 is not the same as source system IDoc type
    I performed following steps in R3 Test system after its system refresh:
    1. Created logcal system and created RFC.
    2. Created port in trx we21.
    3. Created partner profile in trx we20.
    4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
    5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
    After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
    I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
    Someone pls help me.
    Regards,
    Chintan

    Hi Chintan,
    Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
    Also please check have correctly created the idoc in Inbound or Outbound.
    Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
    Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
    Just check your BW system patch level and search for Notes.
    Regards,
    Mahesh

  • The tables KNA1 & KNVV hasn't changed of owner after a refresh system

    Hi,
    Follow-up of this request:
    Re: Error message after refreshing system
    After a second refresh with another restore DB files, the result is the same. The script change_user has finished successfully (without error message), and SAP has started correctly.
    But the tables KNA1 & KNVV didn't change of owner.
    Thank you for your help.
    Fabrice CHAINE

    Yes, the message n° 0020079747 0000322840 2008
         created 16.04.2008 - 14:32:02 CET
    Thanks,
    Fabrice

  • Backup of background jobs after system refresh

    Hi All,
    I want to know that during the system refresh how can we take the backup of the background jobs which are in "Released" state so that we can schedule them the same way after the refresh is done. Presently we are taking the screen shot of "start condition" and "step" of each and every job and then using those screenshots we are scheduling them again after the refresh is completed. It would be really helpful and time saving for us if we come to know the tables where this information is stored and also if there is any other easier way for this.
    Regards,
    Lovneesh

    Hello,
    Check the below thread. It mentions all the tables that contain batch job information.
    https://scn.sap.com/thread/1709175
    " Check below mentioned tables
    BTCCTL,
    BTCDELAY
    BTCEVTJOB
    BTCH1000
    BTCH1010
    TBTCO
    TBTCP
    These have all the information you need regarding background jobs, you may export these tables at the source and import them "
    Check and provide feedback.
    Regards,
    Mudasir

  • Large numbers of workflows appearing in SAP Inbox after system refresh

    Hi all,
    We are having an odd issue where after we perform a system refresh of our PR system to QA, a massive number of Business 23,000+ appear in the SAP Inbox of certain users who are registered as agents.
    We understand how to delete the workflows but want to understand the process of why they keep appearing, and whether this is a system error or a symptom of a user/batch process during or after the refresh.  The workflows do NOT appear for these users in the PR system.
    95% of the notifications are flagged "Error when generating IDoc from MC Document."
    I have been reviewing the Workflow wiki but have yet to find anything pertinent yet.
    http://wiki.sdn.sap.com/wiki/display/HOME/3.Administrationand+Troubleshooting
    Any help with this or applicable SAP Notes would be greatly appreciated.
    Thanks!
    Edited by: Ben Daniels on Dec 6, 2010 11:21 AM

    Hi,
    As the error message, those workitems are generated when system trying to generate IDocs.
    And the reasons why all workitems are sent to all users is, the task is marked as general task.
    What i would suggest is, select any of those workitem, go to its workflow log & analyze which workflow generates these workitems in what case and proceed accordingly.
    Regards,
    Raj

Maybe you are looking for