Trusted systems gone after Solman hardware migration

Hi All,
I migrated our Solman EHP1 to a new x64 box via homogeneous system copy, everything went absolutely fine but one thing... Solman is not trusted any longer in any of the systems. The host/IP is the same and RFC's in SM59 all look good... I wondered if theres any way to regenerate the trusted/trusting RFC's without affecting the rest of the configuration in SMSY.
Also, checked and the satellite systems still and Solman still trust them but not the other way around
Regerads
Juan

Hi Juan,
I came across issue some times back and got Note 128447 - Trusted/trusting systems
This refrence i got from some other note which was referring the post installation activities(System copy) and was suggesting to re-estabilishing trusting/trusted system relationship.
May be worth to read this note
Regards,

Similar Messages

Authorization to logon as trusted system (Trust

Hello everybody,
I want to configure the RFC between the solman and IDES server. so i have done the following things
1. Create a user sapuser in solman and Ides server with the Authorizations, SAP_SUPPDESK_CREATE,SAP_SV_FDB_NOTIF_BC_ADMIN,ZSAP_S_RFCACL,ZSAP_SOL_SERVTRANS_CREATE
2. Create the RFC named SOLTRUSTED in IDes with detail as
              Target Host       :-               solman
              I.P                        :-              192.168.1.4
              System No         :-              00
              Trusted System :              No
After that i have test the connection its working, Same as Remote Logon, . Logon screen asking for user name and password is also working fine.
3. execute the T.cdoe SMT1 create a Trusted System SOL with details as
   Trusted System   SOL
Technical settings
      RFC Destination       SOLTRUSTED
      Authentication type   3
     message server        solman
Trusting system
   Trusting system       RIS
   Application server    ides_RIS_08
here when select Entry-->authorization check -->trusting system here 2 times logon screen appear for solman logging and generate the Error " Error when opening an RFC connection
I have also set the authorization for the object S_RFCACL with required field value as *
Also i have check the TRUSTING_SYSTEM@SOL Rfc, then the connection test successfully done but at Remote Logon No, generate error as - authorization to logon as trusted system (Trust
So please guide/suggest me that any missing or additional steps missing for configure the trusted and trusting system
Thanks
Ganesh

Hello,
As per your suggestion, i have two system Solman and IDES, I want to connect solman and Ides
1. i have create the RFC in IDES
          RFC name             SOLTRUSTED
          Connection type   3
          Target Host           SOLMAN
          System No            00
    ON clicking Connection Testing - successfully
    On clicking Remote Loging, Logon screen is display, on entering Client, Username, and password successfully logon to the solution manager.
          IP address        192.168.1.4
As per suggetion of second step, I have been trying to create the trusted system, i enter the name SOLTRUSTED,at the logon screen enter the client 901, user name and password
Now on the Trusted System means on Solution Manager
create the RFC named RISCLNT999
         Connection type = 3 and descrption
   enter the target host - ides
             system number - 08
             trusted system = yes
             client -999
             check the current user option
      and SAVE
All the setting i have done, but from the IDes server when i use the command Smt1 and select Entry-->Authorization check -->Trusting system, it display logon to solman screen 2 times display the error message "Error when opening an RFC connection"
Entry-->Authorization check -->Current server, it display logon to solman screen display the error message "No authorization to logon as trusted system (Trusted RC=0)"
I have metion in previous message that i was maintain all the necessary authorization.
so please suggest me how to solve the authorization problem?
Thanks
Ganesh

Solman trusted system not working

Dear Experts,
Few Months back we have completed the OS/DB Hardware migration.
After that whenever any end user trying to post the message from production system, system is asking for password then posting the message. before that w/o asking the password, end user can post the message.
I have checked the trust system authorization but still facing the problem.
Please help to solve this issue.
Thanks and Regards,
Dipak

hi dipak,
            There are certain factors you need to checkl.
1) Have you attached the role to the correct user and you have generated the profile.
2)If the problem still persist then you give the trusted system option as NO in the security tab and untick the logon screen option then in below down you should be able to see an area called logon there you need to put your user name and password of the solution manager system.
If still you are facing the issue then you need to check whether your user login has the following roles
SAP_SUPPDESK_ADMIN
SAP_SUPPDESK_CREATE
ZSOL_ATT- in this you need to generate a profile for CRM_ORDER
if you still have the problem
in the profile tab of the user please add the profiles
SAP_ALL and SAP_NEW
This i hope will resolve your problem,
please let me know if you have any further problem
       Best wishes,
                   Varghese
Edited by: varghese oommen on Jun 28, 2008 4:47 PM

Trusted system after system refresh

I was wondering if theres an easy quick way to recreate the trusted system in SMSY after a system refresh or should I create the recreate the trusted system manually?
Regards
Juan

Juan,
recreating manually is in my opinion the only solution.
you can:
- recreate the RFCs again starting from SolMan
- only recreate SolMan as a trusted system in your satellite system
good luck!
Roel
Edited by: Roel Beckers on May 27, 2008 11:14 AM

Workaround during Hardware migration on production system

Dear SDN Friends,
We are approaching Hardware migration project in next two months,
My system details are:
ECC 6.0,
Database: Maxdb 7.6
OS: Microsoft windows server 2003, 64 Bit.
Due to limitation on my current Hardware System Export will take longer on Production server. Due to this reason we will have to look for some standby approach for our buisness. I am thinking of following Approach.
1. Prepare the standby system for production using backup and restore method of Homogeneous system copy.
2. Redirecting all the logon users to this server.
3. Stopping Instance on the main server and Starting System Export there.
4. Starting Import on the new production server.
5. After Import is completed, Stop Standby instance, Take Transaction Logs Backup.
6. Ship Transaction Logs to New Server.
7. Apply Transaction Logs there.
8. Once Logs are applied Start New system and Then Users can Login to this system.
I think with this approach system will not be available for end users for only few hours, (i.e. once the transaction log backup is taken till its applied on New Production server.)
Please Suggest me if you have
done this before or Guide me with proper way if I am wrong.
Regards,
Ritesh Bhatia,

Hi Ritesh,
Instead of going for this long/complicated approach, I would go for the workarounds to plan how we can reduce the time duration of Export itself.
Moreover, after migration of non-production server, when you reach Production then probably you can plan to assign some more resources to the production server. For e.g. claiming some Memory/CPUs from non-production and assign them to Production just for the temporary time period until you finish with production Migration.
Thanks

Updating satellite system data after Upgrade in Solman

Hi All,
We are using solman 7.01 connected to BI 7.0 system as it's satellite system, We have recently Upgrade our BI system to BI 7.01 version but we do not see its updated version in solman system.
We checked in SMSY it is still showing BI 7.0, we have also done option " Read data from system " but it did not work.
Please suggest to Update my system data in solman.
Regards,
Shivam Mittal

Hi Shivam Mittal
When you clicked in "Read system Data Remote", were the information returned with success in the logs ?
Usually the informations aren't pushed because the READ Rfc's are failing.
If you run job LANDSCAPE FETCH, the information are being collected correctly ?

Hardware migration - Windows 2003 DB2

Hello Experts,
We are planning a hardware migration from our present setup consisting of Windows 2003 Standard with DB2 to Windows 2003 Enterprise with DB2.
I would like your suggestions on the following points:
1] Which method of migration should be used
- system copy (migration creating export files)
- database backup and restore
2] What all optimization steps can be followed before and after the migration
Waiting for your valuable suggestions.
Thank you & Kind regards

Hello
you speak about a simple homogeneous system copy (because you do not change the dabase type - DB2 to Oracle for exemple - or the OS - Windows to Unix)
To ways to perform that :
- if you do not change the server, may be a simple upgrade of the OS is sufficent
http://technet.microsoft.com/en-us/library/cc737287.aspx
- if you change the server, you can perform the upgrade by :
1. making a full offline backup of the source system (database)
2. performing the sapinst (homogeneous copy / backup/restore)
The sapinst will help you (asking you to restore the data)
The steps are :
installing the Oracle binaries
installing SAP with sapinst (binaries)
restoring DB2 database (with the offline backup)
restarting DB2 (I don't know DB2 specific steps)
ending installation
Let see the documentation
service.sap.com/instguides
Note 389530 (for other releases search for the relevant note)
Hope this will help you

IMovie has frozen up on me. I've tried rebooting and reinstalling the apps- no help. I can play some of the files- but I can't get into the libraries.Even when I can get something to play the whole system crashes after a few minutes. What can I do?

I desperately need your help. I was working on iMovie last night when the thing froze up on me. I've tried rebooting. I've tried reinstalling the apps. No change. I can play some of the files- although I can't tell which ones will play until they magically appear. I can't get into the project library or the event library. The bar that lets me scroll through the clips is gone. Even when I can get something to play the whole system crashes after a couple of minutes and generates a "problem report" that says "iMovie Quit Unexpectedly". This all started when I was adding cutaways- and one clip just would not load. After I tried several times everything froze up. Have you ever heard of something like this? Maybe I pushed a button or somehow changed a setting? Maybe some of the video is corrupt? What do you recommend?
Thanks for any advice you can offer!

I have tried all the above and nothing seems to work. Any other suggestions?

File Receiver Adapter:Run Operating System COmmand after message Processig:

Dear All,
I have gone through this link
[http://help.sap.com/saphelp_nw2004s/helpdata/EN/e3/94007075cae04f930cc4c034e411e1/content.htm]
But i have a problem.
In the scenario which we have, File name is DYNAMICALLY GENERATED by a UDF
I want to call the file at run time after message processing via Command Line and execute some os commands.
But since the file name is Dynamic....How will i call the file at run time in Command Line:
SYNTAX: %f(FileName)
How will i specify the file name in the above syntax as the file name is Dynamic and not constatnt.
Please Advice.
Senthilprakash.

Dear All,
Yes just now i got the answer from this thread[OS command line script - Need help;
Actually i have another doubt now
In REVEIVER FILE ADAPTER:
when we give Run Operating system Command After Message processing
does the OS command get executed after the output file is placed in the Receiver folder/server or before its placed in the receiver folder?
Regards,
Senthilprakash.

Procedure of System copy in Solman 4.0 through sapinst based on ABAP+JAVA

Hello Everyone,
Iam on solman 4.0 based on netweaver 2004s based on ABAP+JAVA instance and database oracle 10g and on windows 2003 platform.I want to perform system copy for solman 4.0 through sapinst and if someone can provide step wise step procedure with 10-20 lines for system copy with sapinst ,it shall be gr8 help.
I hv gone through the system copy guide on OSS also but its too long and confusing also ,a 12-20 steps procedure shall be useful and helpful . Also Iam performing system copy where source system and taget system are same ie; the current sytem where application is installed , i wanna copy tat only and perform system copy on tat server only.plz revert to tat also.
Requested to revert at earliest as this is very urgent. Points guaranteed.My Email id is [email protected]
Thanks and Reagrds,
Somya

I don´t think, that the system copy guide is confusing, it has basically a step-by-step procedure, depending on the "way" use use (a backup or R3load).
There are several ways of doing a system copy and depending on the one you want to use, the procedure is slightly different.
Markus

SAPMMC All Settings Gone after running CCCleaner , How to get all settings

Hello All
SAPMMC All Settings Gone after running CCCleaner , How to get all settings back .
I donot know what is SID ( System ID ), Instance etc.
If this is not relevant to this forum plz let me know which forum ....
Regards
Rohit

Turns out those error messages it gave me were because it didn't sync properly and create a backup. Which is why when I restored from backup it didn't reload my old info. Instead of assuring me that I would have the option to restore my info, it would have been nice had it told me that a backup hadn't been completed and that restoring my phone without it would leave me with nothing.
Tech support had me use my old SIM card to import my old contacts. This worked, but I've entered contacts since getting the new phone that aren't on my old SIM. And doing so left me with a bunch of re-organizing to do (deleting, combining, entering First and Last name fields...) it took me several hours.
I didn't get my appointments back, cause my old phone was just a phone, and that info wasn't on the old SIM, but I'm REALLY glad I got my contacts.

SMT1 creating trusted system error No authorization for object S_ADMI_FCD

SMT1 creating trusted system gives error No authorization for object S_ADMI_FCD even after giving authorizations in both the system. Was not able find the issue by debugging.
Thanks and appreciate your response.
Betcy
Moderator message: not directly related to ABAP development, please have a look in the SAP Netweaver or Security forums.
Edited by: Thomas Zloch on Jan 26, 2012 10:37 PM

Hi,
Have you tried assigning authorizations to the id from which you are creating trusted system?
If no, please do it and check.
Also check in SU53 after getting the authorization error.
Also check the connection between two systems in SM59.
Cheers,
Raja.D

Cannot create Trusted System in NW 7.1 CE

Hey to all,
I've installed NetWeaver Composition Environment 7.1 SP 4.
Now I want to set up single sign-on between my Java Stack and an ABAP system. When I try to create a trusted System in NWA after choosing the system (which is provided from SLD on an NWDI system) and providing username and password I get an "Internal Error." with the following information in the log file (default trace):
Unknown action
[EXCEPTION]
com.sap.security.core.role.NoSuchActionException: ACTN.AUTH_DS.un:N$sap.com/com.sap.caf.eu.gp.designtime$all
at com.sap.security.core.role.imp.ActionFactory.getAction(ActionFactory.java:459)
at com.sap.security.core.role.imp.RoleServiceActionIterator.iterate(RoleServiceActionIterator.java:131)
at com.sap.security.core.role.imp.RoleServiceActionIterator.<init>(RoleServiceActionIterator.java:85)
at com.sap.security.core.role.imp.PermissionRoles.getActions(PermissionRoles.java:165)
at com.sap.security.core.imp.User.calculatePermissions(User.java:1319)
at com.sap.security.core.imp.User.getPermissionsData(User.java:1188)
at com.sap.security.core.imp.User.hasPermission(User.java:838)
at com.sap.security.core.imp.User.hasPermission(User.java:896)
at com.sap.security.core.imp.UserWrapper.hasPermission(UserWrapper.java:284)
at com.sap.engine.services.jmx.auth.UmeAuthorization.checkMBeanPermission(UmeAuthorization.java:73)
at com.sap.engine.services.jmx.JmxServerFrame.checkMBeanPermission(JmxServerFrame.java:97)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.queryNames(MBeanServerSecurityWrapper.java:320)
at com.sap.engine.services.jmx.ClusterInterceptor.queryNames(ClusterInterceptor.java:1100)
at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.queryNames(MBeanServerInterceptorChain.java:282)
at com.sap.lm.itsam.ui.floorplan.FloorPlan.getIsCEVersion(FloorPlan.java:1345)
at com.sap.lm.itsam.ui.floorplan.FloorPlan.init(FloorPlan.java:497)
at com.sap.lm.itsam.ui.floorplan.wdp.InternalFloorPlan.init(InternalFloorPlan.java:354)
at com.sap.lm.itsam.ui.floorplan.FloorPlanWindow.onPlugDefault(FloorPlanWindow.java:187)
at com.sap.lm.itsam.ui.floorplan.wdp.InternalFloorPlanWindow.wdInvokeEventHandler(InternalFloorPlanWindow.java:122)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingWindow.invokeEventHandler(DelegatingWindow.java:88)
at com.sap.tc.webdynpro.progmodel.window.ViewController.invokeInboundPlugHandler(ViewController.java:445)
at com.sap.tc.webdynpro.progmodel.window.InterfaceView.invokeInboundPlugHandler(InterfaceView.java:158)
at com.sap.tc.webdynpro.clientserver.cal.NavigationManager.processInboundPlugQueue(NavigationManager.java:278)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:506)
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.doPreprocessing(ClientApplication.java:1192)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.delegateToApplicationDoPreprocessing(AbstractExecutionContextDispatcher.java:150)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.DispatchHandlerForAppPreprocessing.doService(DispatchHandlerForAppPreprocessing.java:35)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.AbstractDispatchHandler.service(AbstractDispatchHandler.java:116)
at com.sap.engine.services.servlets_jsp.server.deploy.impl.module.IRequestDispatcherImpl.dispatch(IRequestDispatcherImpl.java:93)
at com.sap.tc.webdynpro.serverimpl.wdc.sessionctx.ExecutionContextDispatcher.dispatchToApplicationDoPreprocessing(ExecutionContextDispatcher.java:100)
at com.sap.tc.webdynpro.serverimpl.core.sessionctx.AbstractExecutionContextDispatcher.dispatch(AbstractExecutionContextDispatcher.java:75)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:506)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.dispatch(ApplicationSession.java:526)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doPreprocessing(ApplicationSession.java:232)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doPreprocessing(ClientSession.java:647)
Can anybody help me please?
Thank you in advance!
Best regards
Kathi

Thanks a lot Soujanya ...
I successfully deployed the application.
But i m stuck with the authentication part, Even i successfully implement the Form based authentication using UME.
But, how can i use my own realm and database for the authentication.
Can you please help me on this.

Rfc with trusted systems

Hello!
I configure system landscape via SMSY and I try to generation rfc connection for added system using wizard.
My system is Solution Manager 4.0, client is 001.
In future I hope to use solman for SP download approving.
What client in trusted system I need to generate rfc-connections?

HI,
Antonina Mukhanova wrote :
In future I hope to use solman for SP download approving.
What client in trusted system I need to generate rfc-connections?
It doest not matter to what client you are connecting using the wizard for RFC in SMSY.
sp stacks is not client dependent.
Regards,
VIJAY.

Oracle Application Hardware Migration using Acronis

Hi,
I’m an Oracle Applications DBA and would really appreciate some other DBA input on the following question.
I have a customer that uses Acronis to backup,restore and image Oracle Applications. Their current instance (11.5.6) is running on really old kit. As a test the windows guys have restored oracle Apps onto a brand new server and started the services. This has worked, which is to be expected (that’s what Acronis does).
My question is “Does Oracle support this method of hardware migration using Acronis”. My understanding is that for hw migration either autoconfig or export+import were the only Supported options.
I know that 11.5.6 is unsupported and come to mention it so is their OS and the fact that they use images as clones. This aside I would be interested in other opinions on weather Acronis is strictly for restoring/imaging a duff system or in fact weather it would be supported by Oracle for Hardware migration. ( With some reasoning please).
I have checked metalink with only one hit (643276.992) but this does not directly answer my question
Thanks in advance to anyone who can reply to this.
Cheers
James

Yes you will be able to do that (migrate/upgrade your 10g Forms & Reports applications to 11g Forms & Reports) and deploy on Oracle Fusion Middleware 11g.
Note that FMW 11g release having Forms & Reports is not yet out. I am not sure about the exact time frame but it is expected to be out sometime this calendar year.
Thanks
Shail

Trusted systems gone after Solman hardware migration

Similar Messages

Maybe you are looking for