Trusted systems suddenly fail
I am working with a connection between my CRM and ECC system. I this was working fine until something happened. Now all of the sudden, none my trusted systems work.
The error message is
CALL_FUNCTION_SINGLE_LOGIN_REJ
You do not have authorization to log on as a trusted system.
Yet I most certainly do have authorization and all of the SU53 checks pass!!
Can anyone help?
Thanks
Jeremy Baker
Have you checked note 986707?
-AD
Similar Messages
-
External USB Maxtor One-Touch 3 suddenly fails to mount on MacBook Pro:
External USB HD suddenly fails to mount on MacBook Pro:
My One Touch III 600GB drive, external power supply, suddenly will not mount and is not recognized by the system profiler or Disk Utility, however, drive, connected USB, appears under windows XP.
1. Power cable and usb cable working.
2. Using external AC adapter(not relying on USB power).
3. Other USB devices, mice, flash drives work on both USB ports.
4. Drive works on Windows, folders and data integrity ok.
5. Drive format is NTFS.
6. No Maxtor software installed.
7. No humming or strange noises emanating from drive.
8. No problem to January 14, 2008,
9. Mac OS 10.4.10 updates last downloaded and installed Jan 20, 2008.
10.1 blip of the light on "The One Touch Button", then light turns solid white.
Questions:
1. Does Apple set sleep or lock switch for devices (drives)?
2. If so, can it be reset manually?
3. Does Apple have configuration profile for devices, like a registry key?
4. If so, where is it located?
Configuration:
Dual 2 GHz MacBook Pro 15”
2 GB DDR SDRAM
OSX 10.4.10
2 USB Ports Left and RightNOTE: This Update is required when using a OneTouch Drive as a bootable device. Seagate suggests that you dismount and disconnect your FireWire Drive before continuing.
Users have identified issues when connecting OneTouch External Drives to FireWire Ports on their Mac G4 and/or G5 computers. These Problems range from system hangs, kernel panics to slow data transfer rates. The cause of these problems has been traced back to the FireWire Driver. Seagate has resolved these problems through updated FireWire Drivers.
I am using USB and not trying to use drive as a boot device. -
Disk Utility can't format my external HD - File System Formatter fails
Hi. I have a Freecom 1.5TB external hardrive that is connected by firewire to my Intel iMac. The drive has worked fine for a year and then suddenly the "error 36 code" appeared and nothing else could be saved to the drive.
Disk Utility told me that it could not repair the disk and that I should format it. At this stage the problems start!
DU fails to format the drive with the error "File System Formatter Failed."
I have read various conversations on this error on these forums and followed the instructions but nothing has worked. I have already
1) Partioned the disk making sure it is "GUID" - then formatted and it still fails
2) Used MS DOS to do it but that also fails.
I have noticed that the SMART status is "not recognised".
Is there anything else that I can do or am I just doing this wrong? I am thinking that I might be able to do something using the start-up disks but I don't know how to do that and don't want to jepardise my iMac whichis otherwise working fine!
Any help appreciated.
RobI went crazy last night with the same issue trying to format my Toshiba external drive. I could format as MSDOS but not Mac journaled. I tried the guid partition scheme etc... no luck. Then I read somewhere that Leopard has an issue with the partitioning schemes. I hooked it up to my macbook on Tiger and whalla, formatted no problem. Then I was able to hook it up to Time Machine and let it reformat it on my Snow Leopard version of OSX on the iMac. I'm on OSX 10.6.8.
-
Wbadmin - access to EFI system partition fails
Sorry, but I could not change the headline in the thread were I started this issue. But error 0x807800C5 is too imprecise
https://social.technet.microsoft.com/Forums/windowsserver/en-US/79a735c1-4c50-4fa8-a945-46e25991eea9/wbadmin-failure-0x807800c5?forum=windowsbackup#47e77a02-ddb0-42dd-b33d-1475471f7bc3
So I sumarize the case:
Server 2012R2
Hypervisor with several running VM's
Up2Date 3/18/15
After weeks of succesfull backups wbadmin suddenly fails with 0x807800C5. No changes were made to the system, same backup device.
I restored a file and a VM succesfully from the backup to verify that the disk and the image is ok.
I run wbadmin from a script with:
wbadmin.exe start backup -quiet -backupTarget:f:\ -vssFull -allCritical -hyperv:vm1,vm2,vm3
Output is:
2015-03-18 23:02:17 INF > wbadmin 1.0 - Backup command-line tool
2015-03-18 23:02:17 INF > The backup operation to F: is starting.
2015-03-18 23:02:17 INF > Creating a shadow copy of the volumes specified for backup...
2015-03-18 23:02:17 INF > Creating a shadow copy of the volumes specified for backup...
2015-03-18 23:02:17 INF > Windows Server Backup is updating the existing backup to remove files that have
2015-03-18 23:02:17 INF > been deleted from your server since the last backup.
2015-03-18 23:02:17 INF > This might take a few minutes.
2015-03-18 23:02:17 INF > Creating a backup of volume (EFI System Partition) (100.00 MB), copied (0%).
2015-03-18 23:02:17 INF > Summary of the backup operation:
2015-03-18 23:02:17 INF > ------------------
2015-03-18 23:02:17 INF >
2015-03-18 23:02:17 INF > The backup operation stopped before completing.
2015-03-18 23:02:17 INF > The backup operation stopped before completing.
2015-03-18 23:02:17 INF > Detailed error: The specified backup disk cannot be found.
I found out that the failure only occurs if I add the -allCritical switch.
If I start the backup for drive c: with this command:
wbadmin.exe start backup -quiet -backupTarget:f:\ -include:C: -vssFull -exclude:c:\Hyper-V
everything is ok.
I can backup every virtual machine with the following command without any problem
wbadmin.exe start backup -quiet -backupTarget:f:\ -vssFull -hyperv:XYZ-DOM
Only this command fails:
wbadmin.exe start backup -quiet -backupTarget:f:\ -vssFull -allCritical
The difference is that wbadmin now tries to backup ALL partitions, also EFI & Co. So I assume that wbadmin does not have proper access to the "EFI System Partition" and that all information which one can find in the logs of the
2012 server related to that event is bullshit (Error: The specified backup disk cannot be found).
I found reports of 8.1 users rleated to similar problems (http://answers.microsoft.com/de-de/windows/forum/windows8_1-files/systemabbildsicherung-bricht-ab/f6ed5e53-829e-48be-9b47-a73f730680cc?page=1&tm=1384095732725). Could be a hint, same kernel.
But at the end: With this kind of backup you'll loose defintly the possibility of an bare-metal restore, very
unsatisfying.
Annother question: Backups with the -hyperv switch are terrible slow. The backups are written to an USB-3 disk, The xyz-Dom machine for example has two vhdx files with roundabout 700GB, more or less 350GB filled. The backup needs 12 hours!
Thank you
Klaus DeissSorry, but I could not change the headline in the thread were I started this issue. But error 0x807800C5 is too imprecise
https://social.technet.microsoft.com/Forums/windowsserver/en-US/79a735c1-4c50-4fa8-a945-46e25991eea9/wbadmin-failure-0x807800c5?forum=windowsbackup#47e77a02-ddb0-42dd-b33d-1475471f7bc3
So I sumarize the case:
Server 2012R2
Hypervisor with several running VM's
Up2Date 3/18/15
After weeks of succesfull backups wbadmin suddenly fails with 0x807800C5. No changes were made to the system, same backup device.
I restored a file and a VM succesfully from the backup to verify that the disk and the image is ok.
I run wbadmin from a script with:
wbadmin.exe start backup -quiet -backupTarget:f:\ -vssFull -allCritical -hyperv:vm1,vm2,vm3
Output is:
2015-03-18 23:02:17 INF > wbadmin 1.0 - Backup command-line tool
2015-03-18 23:02:17 INF > The backup operation to F: is starting.
2015-03-18 23:02:17 INF > Creating a shadow copy of the volumes specified for backup...
2015-03-18 23:02:17 INF > Creating a shadow copy of the volumes specified for backup...
2015-03-18 23:02:17 INF > Windows Server Backup is updating the existing backup to remove files that have
2015-03-18 23:02:17 INF > been deleted from your server since the last backup.
2015-03-18 23:02:17 INF > This might take a few minutes.
2015-03-18 23:02:17 INF > Creating a backup of volume (EFI System Partition) (100.00 MB), copied (0%).
2015-03-18 23:02:17 INF > Summary of the backup operation:
2015-03-18 23:02:17 INF > ------------------
2015-03-18 23:02:17 INF >
2015-03-18 23:02:17 INF > The backup operation stopped before completing.
2015-03-18 23:02:17 INF > The backup operation stopped before completing.
2015-03-18 23:02:17 INF > Detailed error: The specified backup disk cannot be found.
I found out that the failure only occurs if I add the -allCritical switch.
If I start the backup for drive c: with this command:
wbadmin.exe start backup -quiet -backupTarget:f:\ -include:C: -vssFull -exclude:c:\Hyper-V
everything is ok.
I can backup every virtual machine with the following command without any problem
wbadmin.exe start backup -quiet -backupTarget:f:\ -vssFull -hyperv:XYZ-DOM
Only this command fails:
wbadmin.exe start backup -quiet -backupTarget:f:\ -vssFull -allCritical
The difference is that wbadmin now tries to backup ALL partitions, also EFI & Co. So I assume that wbadmin does not have proper access to the "EFI System Partition" and that all information which one can find in the logs of the
2012 server related to that event is bullshit (Error: The specified backup disk cannot be found).
I found reports of 8.1 users rleated to similar problems (http://answers.microsoft.com/de-de/windows/forum/windows8_1-files/systemabbildsicherung-bricht-ab/f6ed5e53-829e-48be-9b47-a73f730680cc?page=1&tm=1384095732725). Could be a hint, same kernel.
But at the end: With this kind of backup you'll loose defintly the possibility of an bare-metal restore, very
unsatisfying.
Annother question: Backups with the -hyperv switch are terrible slow. The backups are written to an USB-3 disk, The xyz-Dom machine for example has two vhdx files with roundabout 700GB, more or less 350GB filled. The backup needs 12 hours!
Thank you
Klaus Deiss -
[NEVERMIND WRONG PROBLEM] "Configuring System Clock FAIL"
I'm getting this error in the messages at bootup:
"Configuring System Clcok FAIL"
It just started in the last week. I've never seen this before. I tried setting "USEDIRECTISA" to "yes" in rc.conf, but this didn't help. I'm not sure what else to do or why this problem suddenly appeared after never having it before.
I'm using Arch64 on a ThinkPad T61.
Thanks.
[Edit: Oops, I misread which message said "FAIL" next to it. It's actually the "Activating Swap" step that's failing. Now to figure that out.]
Last edited by cb474 (2009-09-07 05:13:36)msx wrote:
Here it is, thanks for your interest:
http://aur.pastebin.com/ZSSHE5fU
Glad to do anything I can to help.
I believe it's a problem with the initscripts:
[2010-07-11 19:29] upgraded initscripts (2010.06-2 -> 2010.07-1)
Could anyone else confirm this?
Last edited by itsbrad212 (2010-08-24 06:19:28) -
Upgrade phase STARTSAP_NBAS error: SYSTEM START failed
During an upgrade from BW 3.5 to BI 7.0, I get the following error
message in phase STARTSAP_NBAS:
SYSTEM START failed, code -2
-2: the test rfc did not work.
Try to log on to the system with user DDIC
When I try to log on to the system as user DDIC, I get the following
error message:
DB-Error -0
The same thing happens when I try to log on as SAP*. I am certain that
the password I submit is correct. I have not changed this password at
any time.
I have included SAP_BASIS support package 14 into this upgrade, and
this requires kernel version 133 at least (Note 822379). This kernel
was copied into the usr\sap\put\exenew directory before the upgrade
began. However, the system still seems to run on kernel version 111.
I have tried to put the 133 kernel into
F:\usr\sap\BWS\SYS\exe\nuc\NTAMD64 so that it is copied into
F:\usr\sap\BWS\SYS\exe\run during system startup, but then all my work
processes die. The gateway also seems to be down using this kernel.
Please help!
Regards,
ThomasHi.
I made a stupid mistake.. the kernel I was using was unicode, but I should use a non-unicode kernel..
Regards,
Thomas -
Error during installation of ECC6- system call failed
Dear all,
i encounter the error as below during sap installation. its looks like the ID issue, but this id (fbqadm) is using by me to log into the windows. please help me.
thank
ERROR 2009-03-17 10:07:25.583 [syxxsyshlp.cpp:78]
syslib::printOSError(const iastring &, int, DWORD, const iastring &, CMessage::eLogMessage)
FSL-00001 System call failed. Error 1326 (Logon failure: unknown user name or bad password.
) in execution of system call 'LogonUser' with parameter (fbqadm, SAPFBWDEV01, *******, LOGON32_LOGON_INTERACTIVE,LOGON32_PROVIDER_DEFAULT,&hUserToken), line (1014) in file (synxccuren.cpp).
TRACE 2009-03-17 10:07:25.813 [iaxxejsbas.hpp:408]
handleException<ESyException>()
Converting exception into JS Exception ESyException.
TRACE 2009-03-17 10:07:25.813
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtExceptionproblem fix after reboot the server
-
Hi!
I'm using consume adapter service> sqlbinding > to connect to sql database in order to generate sql schemas.
I'm getting below error:
Connecting to the LOB system has failed.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified).
ChristianeHi,
As suggested earlier this seems to be a DTC related issue. It can only occur if the DTC settings are not proper or if firewalls don't allow the default ports to communicate.
Check DTC settings on both SQL and BizTalk Box and also check if MSDTC service is up and running.
Go to Start
à Run
à (type in) Dcomcnfg. You should be inside Component Services MMC.
Expand Component Services
à Computers
à My Computer (right click)
à Properties
à MSDTC tab
à Security Configuration button.
Select the checkboxes as following :
Check the below article from Microsoft Support Team, they have listed all the errors which may come during setting up a new system. They also have your MSDTC error listed.
Resolving the issues you may face during BizTalk Runtime Configuration
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful. -
hi ,
when generate the schema , i got the below error, please any one put your inputs:
Connecting to the LOB system has failed. A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server
is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server).thaks shanky,
but facing another , after generate schema from WCF_SQL, im unable get elements in my schema.
this is schema generate from storeprocduer , but thru WCF-sql im unable get the elements like
id, name
<xsd:schema targetNamespace="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:schema="urn:schemas-microsoft-com:sql:SqlRowSet2" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sqltypes="http://schemas.microsoft.com/sqlserver/2004/sqltypes" elementFormDefault="qualified">
<xsd:import namespace="http://schemas.microsoft.com/sqlserver/2004/sqltypes" schemaLocation="http://schemas.microsoft.com/sqlserver/2004/sqltypes/sqltypes.xsd" />
<xsd:element name="Test.dbo.sample">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="id" type="sqltypes:int" minOccurs="0" />
<xsd:element name="name" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="sqltypes:nvarchar" sqltypes:localeId="1033" sqltypes:sqlCompareOptions="IgnoreCase IgnoreKanaType IgnoreWidth" sqltypes:sqlSortId="52">
<xsd:maxLength value="1000" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>19</id>
<name>sw</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>18</id>
<name>BIRADAR</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>14</id>
<name>swe</name>
</Test.dbo.sample>
<Test.dbo.sample xmlns="urn:schemas-microsoft-com:sql:SqlRowSet2">
<id>13</id>
<name>se</name>
</Test.dbo.sample> -
Photosmart 6180 all-in-one printer with error meesage "Ink System has failed"
The printer is 3 years old and has been working fine until this week. I now receive a 0xc1820206 error code after the "Ink System has failed" message appeared. I tried unplugging the power cord and removing all the cartridges. Unfortunately, after completing the instructions from the troubleshooting section and turning the printer back on, I immediately receive the error message again before I submit any print job. Does anyone know what specifically the error code means or have anything else I can try like cleaning printheads or something? The printer is attached to an Apple Imac with the snow leopard operating system MAC 10.6
Thank you for any suggestions.The likely issue is the "plumbing" rather than the electronics. There are various pumps and tubing that make up the ink delivery system. Performing a reset as shown here may resolve the issue.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V -
My IPhone is set up with an internet downloaded firmware of ios7 because my phone would not restore, the system has failed and I had to do a manual erase fro within the phone. My computer will not accept the phone because they say it's a "Developer?" Help. I cannot not even get passed the activation step on the computer or phone because it will not activate the device.
Hello buddyacw
You would have to restore the iPhone. Download the latest version of iTunes and then follow the steps in the article below to get it working again.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
Hi All,
i have created a trusted connection(say system A_100 and B_100,---100 is a client) as per SAP note 128447 - Trusted/trusting systems
I have all required authorisation i.e s_rfcacl,S_rfc ,s_rfc_tt.
i am able to remote logon from system B_100 to system A_100 ,but issue in when i try to logon from system A_100 to system B_100.
error is -
No authorization to log on as a Trusted System (L- RC=1 T-RC=1).
i can see run time error in system B_100 as with user SAPSYS and client 000(why it is showing this user and client )
CALL_FUNCTION_SINGLE_LOGIN_REJ
Details-
Category Installation Errors
Runtime Errors CALL_FUNCTION_SINGLE_LOGIN_REJ
Date and Time 08.08.2014 09:07:04
Short text
No authorization to log on as a Trusted System (L-RC=1 T-RC=1).
What happened?
The current program had to be terminated because of an
error when installing the R/3 System.
What can you do?
Note which actions and input led to the error.
For further help in handling the problem, contact your SAP administrator
You can use the ABAP dump analysis transaction ST22 to view and manage
termination messages, in particular for long term reference.
Error analysis
An RFC call (Remote Function Call) was send with an invalid user ID
"XXXX " or the caller system is not registered as a Trusted System in the
target system.
Information on where terminated
Termination occurred in the ABAP program "SAPMSSY1" - in
"REMOTE_FUNCTION_CALL".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 113
of the (Include) program "SAPMSSY1".
Source Code Extract
Line SourceCde
83 COMMUNICATION SEND ID convid BUFFER header.
84 IF sy-subrc EQ 0.
85 PERFORM (sy-xform) IN PROGRAM (sy-xprog).
86 ELSE.
87 MESSAGE a800.
88 ENDIF.
89 ENDFORM. "cpic_call
90
91 *&---------------------------------------------------------------------*
92 *& Form remote_function_call
93 *&---------------------------------------------------------------------*
94 * text
95 *----------------------------------------------------------------------*
96 * -->VALUE text
97 * -->(TYPE) text
98 *----------------------------------------------------------------------*
99 FORM remote_function_call USING value(type).
100 DATA rc TYPE i VALUE 0.
101 DATA: l_syxform TYPE syxform,
102 l_syxprog TYPE syxprog,
103 l_cbe TYPE i.
104
105 * necessary variables for class based exceptions
106 DATA: l_root TYPE REF TO cx_root.
107
108 DO.
109 *
110 * with ID 'CLException' we determine, whether the caller is
111 * class based excptions or not
112 *
>>>> CALL 'RfcImport' ID 'Type' FIELD type
114 ID 'SYXForm' FIELD l_syxform
115 ID 'SYXProg' FIELD l_syxprog
116 ID 'CLException' FIELD l_cbe.
117
118 IF l_syxprog = 'JAVA'.
119 SYSTEM-CALL plugin
120 ID 'JAVA' VALUE 'FORW_JAVA'
121 ID 'RC' VALUE RC.
122 * if there is no rollout on the JAVA side which
123 * rolls both, JAVA and ABAP, we return to the
124 * C-Stack and reach this point
125
126 * in case there was an rollout, the ABAP-C stack is lost
127 * and we jump direkt to this point
128
129 * here we trigger the rollout on this Abap side with
130 * the following statement
131 SYSTEM-CALL plugin
132 ID 'JAVA' VALUE 'ROLL_OUT'
I have also referred sap note-1627901 - Trusted RFC troubleshooting
No luck.
Do let me know if additional information is needed .
Kind Regards,
SumitHi Sumit
1. Is this both system Support pack level are same?
2. As you said that you SAP_Basis 7.31 - support package level?
3. Have you check the SAP note 128447 - Trusted/trusting systems they are given ABAP runtime correction 2021691 - CALL_FUNCTION_SINGLE_LOGIN_REJ and trusted RC=1
4.
one question - why it is working in system B and not in system A.
Its may be software bug for that they give ABAP runtime correction
Regards
Sriram -
Dear All,
I am getting a below error while doing ehp6 installation on sybase (high availbility )
can any one help me on this..?
An error occurred while processing option SAP Business Suite 7i 2011 > Enhancement Package 6 for SAP ERP 6.0 > SAP Application Server ABAP > SAP ASE > High-Availability System > Database Instance( Last error reported by the step: System call failed. Error 2 (The system cannot find the file specified. ) in execution of system call 'CreateProcessAsUser' with parameter ( , NULL, Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/HA/DB, &StartupInfo, &ProcessInfo), line (646) in file (d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp), stack trace: d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\ejscontroller.cpp: 181: EJSControllerImpl::executeScript() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\ejs\jsextension.hpp: 1059: CallFunctionBase::call() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\osmod\iaxxbprocess.cpp: 423: CIaOsProcess::start_impl() d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 238: CSyChildApplicationImpl::start(false) d:\depot\bas\720_rel\bc_720-2_rel\gen\optu\ntamd64\ins\sapinst\impl\src\syslib\synxcchapp.cpp: 262: CSyChildApplicationImpl::doStart() .). You can no
Regards,
Letz..Hello Mauricio.
Thanks
Two Thinks:
1.- This error appears precisely in the process of creating SAP users including you mention sidadm:
A.- Execute sapinst
B.- Installation option is chosen
SAP NetWeaver CE Production Edition
Installation Options
High-Availability System
Central Service Instance (SCS)
c.- System ID, Next and appear message error
2.- However, the user manually create sidadm, I gave the permissions you indicate, and the error message is the same
Thanks -
Error in Local Message System: No authorization to logon as trusted system
Dear all,
When I am posting the message in Production system which I have configured with my solution manager
I am getting the error like "Error in Local Message System: No authorization to logon as trusted system. So trusted message can not be posted"
I checked with SM59 which I created the RFC destination, in that i selected for both the system ie Solution manager as well Production system 'Trusted System=Y'
Please suggest me how to solve this issue
Regards
SudharshanHi,
please use the search function.
There are ALOT of topics regarding Trusted RFCs, table BCOS_CUST, RFC Back Destination to Sol Man and so on.
/cheers -
How to set up trusted system or ip in NW CE 7.1
Hi all,
I am running on NW CE 7.1, and I want to know if NW allows setting up trusted system or ip. If so, is there any documentation about it?
Thanks for your help in advance.Hi,
what do you mean by "trusted system"?
For instance, you can use the CE as a producer in your EP 7.0 consumer portal with SSO. You exchange server certificates and so create a trust between these 2 servers. This is also be possible between CE and ABAP (CE is consuming an ABAP service).
To do so, it's the standard process: export the certificate of CE and import it into the target system
br,
Tobias
Maybe you are looking for
-
I am trying to reinstall CS3 from a download I bought several years ago, and it is saying my serial number is invalid. I am taking the serial number directly from the list of products on my Adobe account. Please advise
-
How can I create an interactive form in Captivate 5?
Hello... I'm creating a Captivate project for an elearning course that will be posted to an LMS. I'd like to create an "Action Plan" at the end where users can click various actions they want (from a list) and then print that page to use as a take-a
-
Setting Tab Order in LiveCycle Designer 7.1
Hi, I am trying to set the tab order in a dynamic form. In my form instances of subforms are added on runtime depending upon the no specified by user. It has atleast 7 pages. I have tried with View >> Tab Order but to no use. Please help. Thanks Neha
-
Oracle JDeveloper 11g - Technical Preview 3 - SEVERE: FAILED_IN_CONFIG
Hi I have installed "Oracle JDeveloper 11g - Technical Preview 3" and build simple ADF application. When I am trying to run it is giving me below error. Apr 4, 2008 1:02:50 PM oracle.j2ee.xml.XMLMessages warningException WARNING: Exception Encountere
-
Row cache lock aquired for more than 1 hour
Hi could some please let me know what is ROW CACHE LOCK, and at what situations does this happen. And also what does dc_histogram_defs enqueue means, what happening internally?? I am facing with a problem in our d/b(11g r1) with a code running more t