Trx F-53 Account X is blocked by payment run

Hi,
I'm posting to an account and when I save appears the following message:
*Account 10001 is blocked by payment run 11/15/2011 EL80
Message no. F0080*
How can I solve it ?
Thanks
Best Regards

Dear Sappione,
>Goto TCode F110
>Give the run date and identification.
>Press Enter
>From the menu select EDIT --> PROPOSAL --> DELETE.
Hope this solves your query
Regards
Saurabh

Similar Messages

Account 5000056 is blocked by payment run 19.02.2011 QW

Hi experts,
While running F110 in APP, I am not able to schedule the proposal successfully. I have gone thru all posts in SDN for it, even deleted the sceduled proposals, even tried with different vendors and invoices but not able to solve it. Trying to clear it or reverse it, I am getting the following error:
Account 5000056 is blocked by payment run 19.02.2011 QW
In this,5000056 is the vendor code and QW is the identifecation for the first time which I have already deleted. But system is persisting with the same error. I have tried to run it 10 times atleast and checked my configurations again and again but there is no such issue.
please guide with a proper solution in this matter.
Regards,
SAP FI

Hello,
I believe otherthan SAP A.G, nobody in the world can solve your queries or requirements.
How you can expect someone to give solutions without seeing the system for unexpected / unintended errors.
Being a consutlant, we should be aware of what we have done and what we are doing, rather than just thinking like a user and posting questions and prolonging with all single line replies. Since many SDNers (i am also one of them) wont look into the issue if it has this many pages and replies. Here all are spending little time to help others voluntarley out of their busy working hours.
Indeed you may not get good answers once the replies looks like a chatting history on gtalk.
So try to give maximum inputs in a single reply.
Anyway if your issue is not desired, you have alll the right to write the same on SAP market place.
One example of your query Posting of a parked document
Hope you got my point.
Regards,
Srinu

Account 100240 is blocked by payment run 01.11.2008 (F-53)

Dear Experts,
I got the problems when I am doing TCODE F-53 Post outgoing payment,
"account 100240 is blocked by payment run 01.11.2008 1", did anyone let me know what is the problems?
wilson

Hi Wilson,
This error is because the same vendor has been processed under F110 earlier and the propsal has been created and further no steps has been carried out (payment run).
If a vendor has line item appearing in the proposal, then it would be blocked for subsequent payments.
U can remove this config in the following path:
IMG>Financial Accounting (New)>Accounts Receivable and Accounts Payable>Business transactions>Outgoing Payments>Automatic Outgoing Payments>Payment Proposal Processing-->Check Payment Block Reasons (Default)
Regards,
Kiran

Bal adj account is picked up in payment run for a vendor

When we do payment program, one additional line item is created for payments in foreign currency other than exchange difference account. The additional line item is created for balance sheet adjustment account which is assigned in foreign currency revaluation settings. I and not able to figure out how this line item is created for payment transactions.
                                  Loc Cur         Doc Cur
Vendor A/c.                        2000            1000
Bank                               2500-           1000-
AP - Adj (3rd Party)                400
Ex. Loss - Realised                 100
This is created with revaluation the due item i.e. original invoice amount with current rate i.e. rate on payment date and posted to AP-Adj (3rd Party) A/c.
AP - Adj (3rd Party) is the valuation account for balance sheet adjustment
Ex. Loss - Realised is realized account maintained in oba1
adjustment
account will only appear in case of "VALUATION OF OPEN ITEM" and not at
the clearing time.
but in the above case while making payment ,the balancesheet adjustment account has got picked up during the automatic payment program...
any idea on above entry why the balancesheet adj account has picked up...

Resolved

Fees account for foreign currencies in payment run F110

Dear all,
I have a problem with a house bank with several bank accounts. At the foreign currency accounts with the same account number, the bank charges are always charged at the foreign currency accounts and not at the Euro account (house currency).
Our desire is that the bank charges are settled in the Euro account.
It seems, that for each record of a foreign currency account to be debited, it requires an own charge account. For foreign currency accounts with different account number to the Euro account is the setting without any problems. In the house bank with foreign currency accounts the fields for the fee accounts were not filled in the payment transfer medium.
How should the setting be, so that bank accounts with different currencies, the fees are cleared only on the Euro account?
We have SAP ECC 6.0 with SAP_APPL 600 Level 12.
If I have missed important information or if my words were indistinct please feel free to ask.
Thanks for any help.
Greetings

Hello Marssel,
sorry, perhaps I described my scenario wrong.
I have only one House Bank with several Account IDs. All but one have the same Bank account number.
For example:
House Bank......................Account ID........................Bank Account No
050.....................................AUSL.................................0444940000
050.....................................CHF....................................0444940000
050.....................................EURO.................................0444940000
050.....................................SCHCK...............................0444940000
050.....................................SGD...................................0444940001
050.....................................USD....................................0444940000
This is the "Bank Account Overview" in transaction FI12.
The house bank country in FI12 is DE for Germany and the ISO Currency Code for the Charges Account is EUR.
The Bank Number and Account Number (0444940000) for the Charges Account are also filled in FI12.
The currencies of Bank GL Account in FS00 are for the foreign currency accounts CHF, SGD and USD. The rest are in house currency EUR.
After starting F110 the bank fees are charged at the foreign currency accounts in CHF and USD. But we want that they are charged over the Euro account in Euro.
Thanks for your help.
Greetings

Vendor account not picked in F110 payment run

Hi Sap Experts,
i have assigned two payment methods to vendor master X,Y,which i do payment run for X for currency USD all the documents are picked for payment and when i run another payment run same time for Y for currency INR its not picking up in payment run even all the open item s are due,
could help me to solve the issue
Laxmi

Hi,
Delete the current proposal of the payment run. Enter parameters once again. In Free selection tab restrict the currency to INR field. Run the proposal once again. If it still does pick up line items, check the following things
1. Parameters of the first payment run. Did you restrict the payment run only for the first payment method
2. Also see the dates entered in parameter tab of both runs
Regards,
radha

Automatic Payment Run - Alternate Bank Account in Vendor Master

Dear Forum,
We have a situation where the users want the alternate bank accounts to be maintained in the Vendor Masters and also to select this alternate bank account while doing the automatic payment run thru F110. While we can maintain more than one bank account in the Vendor Master, but how to select the alternate one during payment run. Your help would be highly appreciated.
Regards

Hi...
As per your issue while runing APP in F110 once complete parameters
And go to Edit praposal and double click vendor and double click on line items than it will displays the one more screen there select Reallocate button there you can enter your respective bank details.
Otherwise there is a Business Transaction Event 1810. You can see the code, looks like you need to replicate the vendor bank details with link to a company code.
Note:
Assign Multiple Bank Accounts in the Vendor Master
Your SAP system provides the functionality to store and use
information from multiple vendor bank accounts in the Payment
transactions screen of the vendor master general data via
transaction FK03 (Figure 1). Figure 1 reflects the bank type
determination logic I used in the vendor master, using the
three-digit International Organization for Standardization (ISO)
currency code as the Bank type.
Figure 1 Bank details vendor master
You can use the BnkT (bank type) field in the vendor master to
enter text differentiators for identifying the vendoru2019s bank
accounts. If you leave the bank type field blank against a bank
account in the vendor master, then it serves as the default bank
if the bank type information is missing in the vendor invoice.
You may want to leave this field blank if the vendor has only
one bank account and you want the system to select that bank
account for all payments.
If the bank type is blank for multiple bank accounts, then the
system looks for the first bank account with the blank bank type
in the vendor master to use as the default. You are not required
to define the text values u2014 in my example, INR, SGD, and USD u2014
elsewhere in your SAP system. The field allows any value up to a
length of four characters. Iu2019ll demonstrate the use of bank type
with vendor invoice later on.
The system performs a check at the time of invoice creation on
the bank type value used in the vendor invoice against the bank
type values used in the vendor master. If you have not defined
the bank type value in the vendor master prior to using it in
the vendor invoice, the system shows an error message. The
system performs the check to ensure that you are using a bank
type value in the vendor invoice against which it can find a
bank account in the vendor master. Otherwise, the system cannot
determine a bank account for making payments to the vendor.
Prerequisites for Vendor Bank Selection
You need to take care of a few configuration prerequisites before
you can use vendor bank selection in the automated payment
functionality.
1. Check the Bank details check box in the payment method as
defined at the country level in transaction FBZP. This ensures
the selection of the bank details from the vendor master at the
time of the automatic payment run. If you donu2019t do this, the
system does not copy the bank details into the payment IDoc that
it creates as a result of the automated payment run (transaction
F110).
2. Make the Bank Business Partners field optional in the field
status group attached to the vendoru2019s reconciliation G/L account
by selecting the button under Opt. Entry for this field. This
field maps to the Part.bank type (partner bank type) field in
the vendor invoice. If the Bank Business Partners field is not
optional and is in a suppressed state, then you cannot input the
partner bank type field in the vendor invoice.
I hope it will helps you....
Regards
vamsi

F150-dunning -----Customer account was blocked by dunning run

Hi
gurus
Cusomer account was blocked by dunning run, where i can unblock please reply as early as possible. while doing individual notice it showing the below error msg.
Error msg: Account D 000006000001 was blocked by dunning run 20006722 DUN1
it showing above error, where i can unblock.
Thank you
Anil

hi Anil,
If the invoices are bloced for the particualar invoices then go to Tcode MRBR and enter the invoices number and release it and then Run the Dunning.....
Assign the points....
Ranjit

GL account needs to block for local currency & another cur. needs to post

Hi,
I need GL account that should block for posting in local currency, it should post other(forgien) currencies. how can i handle this scnerio.
if there is any balance,is it possiable to maintain validation.could you please let me know,how i can resolve this problem.
Thanks in advance
Jaya

Hi,
Though a document is created in foreign currency, system will also update the amount in local currency based on the conversion rate given in the document or maintained in OB08 table.
If your requirement is to allow only foreign currency transaction for a GL account, then write validation with the condition that - If GL account no is XXXXX, check document currency is not equal to local currency (BKPF-WAERS).
Regards,
Rengaraj

What is the signiface of Account Assignment (Coding) Block: Details

Hi what is the signiface of Account Assignment (Coding) Block: Details
what is its effect in PO

Hi,
Material are procured as stock or non-stock materials. When you procure material which can be used in production of finished product ,stock is maintained.
Account assignment category describes how the procured material is being used (for eg: Cost Center, Sales Order, etc). It also determines how the accounting entries made when a GR document or IR document is posted.
When you use the Account Assignment Category "K", it means the material is allocated to a cost center for consumption. The Materials is accounted to the particular cost center.
Account Assignment Category "P" is used for materials that are required for the project related.
Hope it helps.
Regards,
Bijoy Kumar

My itunes account has been block due to i forgot the answer of my security question

My itunes account has been block due to i forgot the answer of my security question

If changing your password does not solve then contact itunes support

Accounting document show BLOCKED in return invoice.

Hi,
when we create return invoice ( credit note) then accounting document show BLOCKED.
return order, delevery and invoice is craeted , but accounting document not created.
pls give me soln.
REgards,
Sohail

It all depends on the Customizing of Billing Type RE.In VOFA ,Check Box Posting Block has been activated against Billing Type RE.
So after saving the Returns Invoice , the Accounting Document gets Blocked.In such cases , these Documents can be released manually only.
Best Regards,
Ankur
Edited by: Ankur Agrawal on Sep 6, 2010 3:40 PM

Account is blocked by dunning run

Hi,
after i have run dunning for customers and if i look into log i see that for some customers dunning didn't run.
Account D 0000010900 is blocked by dunning run 20080820 82008.
There is any transaction where i can block/unbloc customers for dunning? From where came that blocking?
Any idea/hint/clue would be apreciated.
Thank you.

Hi Dan,
With reference to the above issue, please have a look at note 186095.
186095 Error message FM120 during dunning
Actually the concept behind blocking customer accounts is to avoid multiple dunning against the same customer account. However once the the dunning run was completely finished and gets printed the lock must get removed on those customer accounts. But some times there is a chance that lock entries shall not get deleted from the table MAHNS. In that case you can make use of the attached notes 186095 to manually delete the blocked entries from the table MAHNS.
Also please check the other following notes relevant to the issue
12896 Deleting lock entries in MAHNS
9826 Account && is blocked by dunning run <date>
Hope it helps.
Regards,
Emoke

ITunes proxy authorisation window does not appear (and account is being blocked randomly)

Many users have iTunes installed on their PC. iTunes requires proxy authorization to connect to internet. Appropriate popup window appears when opening iTunes and trying to open some internet-based page there. Entering current AD account credentials helps to connect. There is also a checkmark there allowinf to save credentials for further use (and do not show this window anymore). When AD password is changed - this popup window does not appear again and user's account is being blocked (because iTunes tries to connect proxy with old credentials). The question is: is it possible to reset proxy settings, stored somewhere inside iTunes somehow? Just to return proxy authorization window back. Did you have such an experience? If you caould share any knowledge - it would be great.

What happens if you go to iTunes > File > Devices, do you get the option to Sync iPhone?
You could try a reinstall of iTunes. OS X Yosemite: Reinstall apps that came with your Mac

After changing my e-mail address, two iCloud accounts were created, my iphone is unusable due to password requests every few seconds and my account has been blocked. What can I do?

After changing my e-mail address, two iCloud accounts were created, my iphone is unusable due to password requests every few seconds and my iCloud account has been blocked. What can I do?

So, you are saying that you set up a brand new Apple ID and then signed into iCloud with it, correct?
Are you also saying both accounts are disabled for Security reasons? If not, why can't you sign on with the one that is not disabled?
GB

Trx F-53 Account X is blocked by payment run

Similar Messages

Maybe you are looking for